NL1025T-01AC

Technical Data Sheet for NL1025T Single-Stage Thermoelectric Module NOMINAL PERFORMANCE IN NITROGEN Hot Side Temperature (°C) Δ Tmax (°C): Qmax (watts): Imax (amps): Vmax (vdc): AC Resistance (ohms): PRODUCT FEATURES     27 64 5.2 1.8 4.4 2.1 50 73 5.8 1.8 4.9 -- ORDERING OPTIONS RoHS EU Compliant Rated operating temperature of 85°C Maximum processing temperature of 220°C Ceramic Material: Aluminum Oxide. Model Number NL1025T-01AC NL1025T-02AC NL1025T-03AC NL1025T-05AC NL1025T-06AC NL1025T-07AC Description Both Surfaces are Metallized Hot Side Exterior is Metallized No Metallization No Metallization, Insulated 7 Inch Leadwire No Metallization, RTV Sealed No Metallization, Insulated 5 Inch Leadwire OPERATION CAUTIONS INSTALLATION For maximum reliability, storage and operation below 85°C in a non-condensing environment is recommended. To minimize thermal stress, use linear/proportional temperature control or a similar method rather than an ON/OFF method. Recommended mounting methods: Bonding with thermal epoxy or soldering with metallized ceramics. For additional information, please refer to our TEM Installation Guide. II-VI Marlow – Dallas, TX USA 214-340-4900 877-627-5691 marlow.sales@ii-vi.com Marlow Industries Europe GmbH - Germany +49 (0) 6150 5439 - 403 info@marlow-europe.eu II-VI Japan Inc. 81 43 297 2693 (tel) center@ii-vi.co.jp www.ii-vi.co.jp MI Form 005-0808 Rev. B II-VI Singapore Pte., Ltd. (65) 6481 8215 (tel) info@ii-vi.com.sg Marlow Industries China, II-VI Technologies Beijing 86-10-643 98226 info@iivibj.com DOC # 102-0298 REV P - PAGE 1 OF 2 www.marlow.com Hot Side Temperature 27°C 40.0 20.0 0.0 60.0 40.0 20.0 0.0 4.0 Q=0 T=0 2.0 1.0 VOLTAGE (VDC) 5.0 3.0 0.0 0.0 HEAT LOAD (WATTS) 0.00 0.50 1.00 1.50 2.00 2.50 3.00 3.50 4.00 4.50 5.00 5.50 80.0 T (C) 60.0 T (C) Hot Side Temperature 50°C HEAT LOAD (WATTS) 0.00 0.50 1.00 1.50 2.00 2.50 3.00 3.50 4.00 4.50 5.00 80.0 VOLTAGE (VDC) TYPICAL PERFORMANCE CURVES ENVIRONMENT: ONE ATMOSPHERE DRY NITROGEN 4.0 3.0 Q=0 T=0 2.0 1.0 0.4 0.8 1.2 CURRENT (AMPS) 1.6 0.0 0.0 2.0 0.4 0.8 1.2 CURRENT (AMPS) 1.6 2.0 MECHANICAL CHARACTERISTICS For performance information in a vacuum or with hot side temperatures other than 27°C or 50°C, contact one of our Applications Engineers at 877-627-5691. All units are in inches and [ ] are in millimeters unless otherwise stated. For customer support or general questions please contact a local office or visit our website at www.marlow.com. Marlow reserves the right to make product changes without notice. MI Form 005-0808 Rev. B DOC # 102-0298 REV P - PAGE 2 OF 2 www.marlow.com