PL080-8.5-40-01LS

Technical Data Sheet for PL080-8.5-40 Single-Stage Thermoelectric Module NOMINAL PERFORMANCE IN NITROGEN Hot Side Temperature (°C) Δ Tmax (°C): Qmax (watts): Imax (amps): Vmax (vdc): AC Resistance (ohms): PRODUCT FEATURES         27 66 78 8.5 14.7 1.45 50 74 86 8.5 16.2 -- ORDERING OPTIONS RoHS EU Compliant o Rated operating temperature of 130 C. Ceramic Material: Aluminum Oxide Porchless configuration for reduced footprint. Superior nickel diffusion barriers on elements. High strength for rugged environment. RTV sealing option available. Lapped option available for multiple module applications Model Number PL080-8.5-40-01 PL080-8.5-40-01L PL080-8.5-40-01LS PL080-8.5-40-02 PL080-8.5-40-02L PL080-8.5-40-02LS PL080-8.5-40-03LS Description Leadwires Leadwires, Lapped Leadwires, Lapped, Sealed Leadwires Leadwires, Lapped Leadwires, Lapped, Sealed Leadwires, Lapped, Sealed OPERATION CAUTIONS INSTALLATION For maximum reliability, storage and operation below 130°C in a non-condensing environment is recommended. To minimize thermal stress, use linear/proportional temperature control or a similar method rather than an ON/OFF method. Recommended mounting methods: Clamp with uniform pressure to a flat surface with thermal interface. For additional information, please refer to our TEM Installation Guide. II-VI Marlow – Dallas, TX USA 214-340-4900 877-627-5691 marlow.sales@ii-vi.com Marlow Industries Europe GmbH - Germany +49 (0) 6150 5439 - 403 info@marlow-europe.eu II-VI Japan Inc. 81 43 297 2693 (tel) center@ii-vi.co.jp www.ii-vi.co.jp MI Form 005-0689 Rev. 4 II-VI Singapore Pte., Ltd. (65) 6481 8215 (tel) info@ii-vi.com.sg Marlow Industries China, II-VI Technologies Beijing 86-10-643 98226 info@iivibj.com DOC # 102-0378 REV D - PAGE 1 OF 2 www.marlow.com TYPICAL PERFORMANCE CURVES ENVIRONMENT: ONE ATMOSPHERE DRY NITROGEN Hot Side Temperature 27°C Hot Side Temperature 50°C + _ 123456 MARLOW PL080-8.5-40-L MECHANICAL CHARACTERISTICS For performance information in a vacuum or with hot side temperatures other than 27°C or 50°C, contact one of our Applications Engineers at 877-627-5691. All units are in millimeters unless otherwise stated. For customer support or general questions please contact a local office or visit our website at www.marlow.com. Marlow reserves the right to make product changes without notice. MI Form 005-0689 Rev. 4 DOC # 102-0378 REV D - PAGE 2 OF 2 www.marlow.com