TG-PP10-500G

TG-PP-10 Silicone Thermal Putty Description TG-PP-10 is a one-part thermal conductive interface material based on silicone resins. It does not bleed and flow. It is designed for very good thermal conduction with high electrical insulation. Applications Thermal conductive interface material for electronic parts and devices. Guidelines for use 1. Thaw the silicone to room temperature before use 2. Wear rubber glove when handling the silicone putty 3. Scoop a quantity of the silicone putty from the container using a stainless steel spoon 4. Work and knead the putty around electronic part and circuit by hand 5. Wipe off any excess party with a piece of dry cloth. Further cleaning of residues may be achieved by wiping with cloth wetted with isopropanol Properties Property Chemical type Appearance Mix ratio, by weight Shelf life Viscosity, Brookfield RVT, 25⁰C Specific gravity, 25⁰C Thermal Conductivity Hardness Storage Temperature Typical Value Silicone White Putty 1 component 6 Unit Month Test Method Visual - Putty cP ASTM D792 3.2 10 50 -50 to 200 W / mK Shore 00 ⁰C ASTM D792 ISO/DIS 22007 ASTM D2240 - Storage Tightly close original container of unused product and store in dark and cool place NOTICE: The information contained herein is to the best of our knowledge true and accurate. However, since the varied conditions of potential use are beyond our control, all recommendations or suggestions are presented without guarantee or responsibility on our part and users should make their own test to determine the suitability of our products in any specific situation. This product is sold without warranty either expressed or implied, of fitness for a particular purpose or otherwise, except that this product shall be of standard quality, and except to the extent otherwise stated T-Global Technology Europe and North America’s invoice, quotation, or order acknowledgment. We disclaim any and liability incurred in connection with the use of information contained herein, or otherwise. All risks of such are assumed by the user. Furthermore, nothing contained herein shall be construed as a recommendation to use any process or to manufacture or to use any product in conflict with existing future patents covering any product or material or its use. Tel: +44 (0) 1455 553 510 Email: sales@tglobaltechnology.com Web: www.tglobaltechnology.com Skype: tglobal.technology