SMS-120-01-G-D

REVISION Y SMS-1XX-XX-XX-D ROW SPECIFICATION -D:DOUBLE ROW (USE SMS-50-D) No OF POSITIONS -01 THRU -50 POSITIONS DO NOT SCALE FROM THIS PRINT LEAD STYLE (SEE TABLE 1) USE SPECIFIED LEAD STYLE TO IDENTIFY CONTACT PLATING SPECIFICATION -G: 10µ" GOLD IN CONTACT AREA, 3µ" GOLD ON TAIL -T: MATTE TIN CONTACT AND TAIL -S: 30µ" SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL -F: 3µ" FLASH SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL (AVAILABLE IN -01 LEAD STYLE ONLY) -H: 30µ" HEAVY GOLD IN CONTACT AREA, 3µ" GOLD ON TAIL -TM: MATTE TIN CONTACT AND TAIL -SM: 30µ" SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL -FM: 3µ" FLASH SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL (AVAILABLE IN -01 LEAD STYLE ONLY) -L: 10µ" LIGHT SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL C ((NO OF POS x .0500[1.27]) + .009[0.23]) .007[0.18] (SEE NOTE 4) 02 100 .220 5.59 REF 99 01 "A" .335 8.51 REF SMS-50-D C C-16-X-XX "B"±.005[0.13] (SEE TABLE 1) "A" 2 MAX SWAY (EITHER DIRECTION) .016 0.41 REF (TYP) .050 1.27 .020 0.51 REF (TYP) .100 2.54 C C SECTION "A"-"A" PACKAGING VIEW (SEE TABLE 2 & NOTE 5) NOTES: C 1. REPRESENTS A CRITICAL DIMENSION. 2. MAXIMUM ALLOWABLE BOW: .006[0.15] INCH/INCH AFTER ASSEMBLY. 3. MAXIMUM CUT FLASH: .005[0.13]. 4. PARTS CUT TO POSITION SHOULD BE SYMMETRICAL ABOUT CL . MINIMUM END WALLS OF CUT BODIES SHALL BE .012 [0.30]. WHEN MEASURED AT CONTACT TAIL. 5. PACKAGE ONLY POSITIONS 10 THROUGH 50 IN TUBES. BOX PACKAGE POSITIONS 01 THROUGH 09. 6. MINIMUM CONTACT PUSHOUT FORCE: 1.5 LBS. UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES. TOLERANCES ARE: DECIMALS ANGLES .XX: .01 [.3] 2 .XXX: .005 [.13] .XXXX: .0020 [.051] MATERIAL: PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHICH IT WAS OBTAINED WITHOUT THE EXPRESSED WRITTEN CONSENT OF SAMTEC, INC. DO NOT SCALE DRAWING SHEET SCALE: 4:1 INSULATOR: VECTRA E130I, COLOR: BLACK CONTACT: PHOSPHOR BRONZE, SPRING TEMPER, ALLOY 511 OR 510 C:\EnterpriseVault\DWG\MISC\MKTG\SMS-1XX-XX-XX-D-MKT.SLDDRW 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PHONE: 812-944-6733 FAX: 812-948-5047 e-Mail: info@SAMTEC.com code: 55322 DESCRIPTION: .050[1.27] CENTERLINE SOCKET MICRO STRIP DWG. NO. BY: SMS-1XX-XX-XX-D BRYANT 04/09/1991 SHEET 1 OF 1