CONREVSMA003.031-L

Description Body Pin Insulation Nut Washer Material Brass Be Cu PTFE Brass Brass Finish Nickel Gold N/A Nickel Nickel REVISIONS REV B C DESCRIPTION 29-JUN-12 BPM Updated footprint dimensions; Updated note 3 10-DEC-15 SAH 0.200 [5.08] 0.040 [1.02] 0.037 [0.94] 0.103 [2.62] 0.189 [4.80] 0.756 [19.20] 0.167 [4.24] 0.334 [8.48] 0.167 [4.24] BOTTOM TOP RECOMMENDED FOOTPRINT BACK VIEW SIDE VIEW Ø0.254 [6.50] 1/4-36UNS-2B THREADS RECOMMENDED MOUNTING HOLE Ø0.402 [10.20] H0.315 [8.00] NUT 0.200 [5.08] 0.060 [1.52] 0.311 [7.90] 0.374 [9.50] 1.008 [25.60] 0.065 [1.65] 0.060 [1.52] 0.295 [7.50] 0.252 [6.40] APPV Updated footprint and dimensions; Added new title block Ø0.030 [0.76] 1/4-36UNS-2A THREADS DATE 0.020 [0.50] WASHER NOTES: (UNLESS OTHERWISE SPECIFIED) 1. ALL DIMENSIONS ARE IN INCHES [mm]. 2. DIMENSIONS APPLY AFTER FINISHING. 3. MANUFACTURE TO BE COMPLIANT WITH EU RoHS DIRECTIVE, USE MATERIALS THAT DO NOT CONTAIN REACH SUBSTANCES OF VERY HIGH CONCERN >1000ppm, AND USE DRC CONFLICT-FREE SOURCED MATERIALS. 4. SAFETY BREAK ALL SHARP CORNERS AND EDGES .02 MAXIMUM. : THIS DRAWING CONTAINS PROPRIETARY INFORMATION THAT IS THE SOLE PROPERTY OF LINX TECHNOLOGIES, AND SHALL BE TREATED AS SUCH. NO DISCLOSURE OR REPRODUCTION OF THIS DOCUMENT IS PERMITTED, IN WHOLE OR IN PART, WITHOUT THE EXPRESS WRITTEN PERMISSION OF LINX TECHNOLOGIES OR ITS DESIGNATED AGENTS. MATERIAL: FINISH: PROJECTION: TOLERANCES: .020 [0.50]-.200 [5.00]= .008 [0.20] .200 [5.00]-1.200 [30.00]= .016 [0.40] 1.20 [30.0]-4.75 [120.0]= .024 [0.60] 4.75 [120.0]-12.40 [315.0]= .040 [1.0] ANGLES: 1 TITLE: 159 ORT LANE MERLIN, OR 97532 RP-SMA FEMALE EDGE MOUNT FOR 0.031” THICK BOARD, EXTENDED SIZE DWG. NO. DRAWN: B.MURPHY DT: 29-JUN-12 ENGR: S.HOGAN DT: 29-JUN-12 SCALE: 2:1 REV CONREVSMA003.031-L DO NOT SCALE DRAWING C SHEET 1 OF 1 LDCFDLT_A