MMCX-P-P-H-ST-MT1

REVISION E MMCX-P-P-X-ST-MT1 DESIGNED & DIMENSIONED IN MILLIMETERS[INCHES] DO NOT SCALE FROM THIS PRINT "A" GENDER -P: PLUG 4.50 .177 (REF) TYPE -P: PCB 3.50 .138 (REF) 1.60 .063 (REF) "A" +0.05 +.002 0.20 - 0.20 .008 - .008 (REF) TO CENTER CONTACT MMCX-P-P-X-ST-MT1-SHL 2.80 .110 (REF) 5.35 .211 (REF) 7.40 .291 (REF) MMCX-CRNG-001-X 1.40 .055 (REF) 2.05 .081 (REF) 'B' MMCX-INS-006 MMCX-P-P-X-ST-MT1-PIN 0.051-0.178 TO CENTER CONTACT 2.54 .100 (REF) ORIENTATION -ST: STRAIGHT PLATING SPECIFICATION -H: HEAVY GOLD (SEE TABLE 1) 0.40 .016 (REF) 2.38 .094 (REF) TERMINATION -MT1: MIXED TECHNOLOGY 0.70 .028 (REF) SECTION "A"-"A" RECOMMENDED PCB LAYOUT SURFACES FLUSH +/-.10 0.84 .033 (4 PLCS) 0.50 .020 (4 PLCS) REF NOTES: 1. REPRESENTS A CRITICAL DIMENSION. 2. PUSHOUT FORCE FOR INSULATOR: 22.24 N [5 LB] MIN. 3. PUSHOUT FORCE FOR CENTER CONTACT: 11.12 N [2.5 LB] MIN. 4. INSERTION AND WITHDRAWAL FORCES PER 2.2.2 OF EN 122340:2002. INSERTION = 18 N[4 LB] MAX. WITHDRAWAL = 6 N[1.3 LB] MIN. / 18 N[4 LB] MAX. 5. PARTS TO BE PACKAGED IN TRAYS; IF QUANITY IS LESS THAN HALF TRAY, PARTS TO BE PACKAGED IN COHESIVE FOAM. 6. RoHs COMPLIANT. 2.54 .100 1.30 .051 DETAIL 'B' SCALE 20 : 1 2.54 .100 c:\enterprisevault\DWG\MISC\MKTG\MMCX-P-P-X-ST-MT1-MKT.SLDDRW UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN MILLIMETERS [INCHES]. TOLERANCES ARE: DECIMALS ANGLES .X: 0.3 [.01] 2 .XX: 0.13 [.005] .XXX: 0.051 [.0020] MATERIAL: SEE TABLE 1 * PROPRIETARY NOTE * THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS WRITTEN CONSENT OF SAMTEC, INC. DO NOT SCALE DRAWING SHEET SCALE: 6:1 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PHONE: 812-944-6733 FAX: 812-948-5047 e-Mail: info@SAMTEC.com code: 55322 DESCRIPTION: MMCX STRAIGHT, MIXED TECHNOLOGY PLUG- 50 OHM DWG. NO. MMCX-P-P-X-ST-MT1 BY: R MUSSER 12/03/2007 SHEET 1 OF 1