HP75BNC14X

0.671 17 CRIMP ON THIS AREA 0.282 7.2 0.602 15.3 B 0.319 8.1 B A A 0.157 4 GASKET RUBBER, RED SHELL SEE NOTES 1 AND 3 ALTRERNATE KNURL DESIGN RECOMMENDED CABLE STRIPPING DIMENSIONS WASHER SEE NOTES 2 AND 3 FORMING SWITCHCRAFT STRIPPING TOOL #PTS1 BODY SEE NOTES 1 AND 3 0.078 2 0.571 14.5 B 0.015 0.4 HOLE 0.488 12.4 0.172 4.4 B 0.50 12.7 0.326 8.3 0.212 5.4 RETAINER RING SEE NOTES 1 AND 3 SPRING SK5 SEE NOTE 4 0.152 3.9 0.953 24.2 SECTION A-A 0.053 1.34 B B 0.134 3.4 FERRULE SEE NOTES 3 & 7 CONTACT PIN SEE NOTES 1 AND 5 B INSULATOR NATURAL SEE NOTE 6 0.059 1.5 NOTES: CUSTOMER DRAWING FINISH (PLATING THICKNESS IN MICRO-INCHES) BRASS PER QQ-B-626 BRASS PER QQ-B-613 NICKEL PLATING 100 MIN THICK OVER COPPER STRIKE. NICKEL PLATING 200 MIN THICK OVER COPPER STRIKE. GOLD PLATING 50 MIN THICK OVER NICKEL PLATING 100 MIN THICK OVER COPPER STRIKE. 6. TEFLON MIL-P-19468 7. JIS H 3250, C2600 8. CRIMPED FERRULE HEX CRIMP SIZE 0.187. B 9. CRIMPED CONTACT PIN SQUARE CRIMP SIZE 0.042 OR HEX CRIMP SIZE 0.041. 10. ALL DIMENSIONS ARE REFERENCE UNLESS OTHERWISE SPECIFIED. 11. THIS PRODUCT IS RoHS COMPLIANT. THIS DRAWING DESCRIBES A DESIGN CONSIDERED PROPRIETARY IN NATURE, DEVELOPED AND MANUFACTURED BY SWITCHCRAFT INC. AND IS RELEASED ON A CONFIDENTIAL BASIS FOR IDENTIFICATION PURPOSES ONLY. 1. 2. 3. 4. 5. UNLESS OTHERWISE SPECIFIED 1. ALL DIMENSIONS IN INCHES B 26364 3-31-09 A 26142 3-12-09 REV ECO NUMBER DATE REVISIONS SIZE WIDTH FINISH - TWO PLACE DECIMALS 0.02 - THREE PLACE DECIMALS 0.005 SPEC No. FIRST USED ON TJK DATE DRAWN RF TJK 10-31-06 APVD DO NOT SCALE DRAWING SolidWorks CAD File NAME B LBS/M TEMPER MATERIAL RS BY MULT BY RF SPEC No. SCALE 3:1 CHKD RF 10-31-06 APVD TJK 10-31-06 75 OHM BNC CONNECTOR 179DT CABLE, RoHS SHEET PART No. 1 OF HP75BNC14X 1 REV B