HP75BNC6X

0.282 7.2 CRIMP ON THIS AREA 0.602 15.3 B A A 0.319 8.1 B 0.157 4 GASKET RUBBER, RED ALTERNATE KNURL DESIGN WASHER SEE NOTES 2 AND 3 SHELL SEE NOTES 1 AND 3 RECOMMENDED CABLE STRIPPING DIMENSIONS FORMING BODY SEE NOTES 1 AND 3 SWITCHCRAFT STRIPPING TOOL #PTS1 0.488 12.4 B 0.571 14.5 0.186 4.7 0.326 8.3 0.043 1.1 0.250 6.4 B SPRING SK5 SEE NOTE 4 0.953 24.2 SECTION A-A 0.319 8.1 0.291 7.4 0.059 1.5 0.053 1.34 B RETAINER RING SEE NOTES 1 AND 3 0.50 12.7 CONTACT PIN SEE NOTES 1 & 5 INSULATOR NATURAL SEE NOTE 6 FERRULE SEE NOTES 3 AND 7 CUSTOMER DRAWING NOTES: FINISH (PLATING THICKNESS IN MICRO-INCHES) BRASS PER QQ-B-626 BRASS PER QQ-B-613 NICKEL PLATING 100 MIN THICK OVER COPPER STRIKE. NICKEL PLATING 200 MIN THICK OVER COPPER STRIKE. GOLD PLATING 50 MIN THICK OVER NICKEL PLATING 100 MIN THICK OVER COPPER STRIKE. 6. TEFLON MIL-P-19468 7. JIS H 3250, C 2600 8. CRIMPED FERRULE HEX CRIMP SIZE 0.278. 9. CRIMPED CONTACT PIN SQUARE CRIMP SIZE 0.042 OR HEX CRIMP SIZE 0.041. 10. ALL DIMENSIONS ARE FOR REFERENCE ONLY. 11. THIS PRODUCT IS RoHS COMPLIANT. THIS DRAWING DESCRIBES A DESIGN CONSIDERED PROPRIETARY IN NATURE, DEVELOPED AND MANUFACTURED BY SWITCHCRAFT INC. AND IS RELEASED ON A CONFIDENTIAL BASIS FOR IDENTIFICATION PURPOSES ONLY. STAR SYMBOL DENOTES CRITICAL DIMENSION 1. 2. 3. 4. 5. UNLESS OTHERWISE SPECIFIED 1. ALL DIMENSIONS IN INCHES - TWO PLACE DECIMALS 0.01 - THREE PLACE DECIMALS 0.005 - ANGLES 1 - ALL DIA. CONCENTRIC WITHIN 0.005 T.I.R. B 26364 3-31-09 RS TJK 2. FEATURES ON THE SAME CENTERLINE MUST BE ALIGNED WITHIN 0.002 A 26142 3-12-09 RF TJK 3. REMOVE ALL BURRS REV ECO NUMBER DATE REVISIONS BY APVD DO NOT SCALE DRAWING SolidWorks CAD File SIZE WIDTH MULT FINISH DATE DRAWN 10-31-06 B TEMPER MATERIAL SPEC No. FIRST USED ON NAME LBS/M BY RF SPEC No. SCALE 3:1 CHKD RF 10-31-06 APVD TJK 10-31-06 75 OHM BNC CONNECTOR 1695A CABLE, RoHS SHEET PART No. 1 OF HP75BNC6X 1 REV B