09160

0.28" C B A D E F D Made in the United States of America H G 0.11" (3mm) 0.83" (21mm) I Y Meets required limits of ANSI/ESD S20.20 and requirements of ANSI/ESD S1.1. A. B. C. D. E. F. G. H. I. RESISTOR END X NON-RESISTOR END Underwriters Laboratory Listing 90P1C. 3.5mm phono plug. Compatible with Desco Dual-Wire Continuous Monitors and other manufacturers. Desco logo molded in compliance with ANSI/ESD S1.1. Thermoplastic elastomer strain relief molded on. Relaxed retraction coil cord reduces tug on wearer’s wrist. Black PVC insulation. Break load average 30 pounds. Dual T-3067 tinsel conductor. Consists of stranded polyester wrapped in copper. Equivalent to 29 gauge (cir mil and/or ohms). 1 megohm (±5%) current limiting resistors on both conductors. Spring loaded 4mm medical snap socket. Spring separation .125" - .165". Provides 1-5 pound breakaway from .160" snap studs (ESD S1.1). Compatible with Desco Dual-Wire Wristbands ONLY (not including MagSnap® or MagSnap360™ products). Date coded with date of manufacture in compliance with ANSI/ESD S1.1. Item Retracted Length Y X Extended Length Nominal Max 09160 12 in (0.3m) 20 in (0.5m) 6 ft (1.8m) 8.5 ft (2.6m) 09161 24 in (0.6m) 32 in (0.8m) 12 ft (3.7m) 18 ft (5.5m) 09162 30 in (0.76m) 38 in (0.96m) 15 ft (4.6m) 22 ft (6.7m) *U.S. Patents 6,052,053 and 6,205,408 Unless otherwise noted, tolerance ±10% Specifications and procedures are subject to change without notice. JEWEL® DUAL-WIRE COIL CORD DESCO WEST: 3651 WALNUT AVE., CHINO, CA 91710 WEB SITE: Desco.com PHONE (909) 627-8178 DESCO EAST: ONE COLGATE WAY, CANTON, MA 02021-1407 PHONE (781) 821-8370 ©2016 DESCO INDUSTRIES INC. Employee Owned DRAWING NUMBER 09160 DATE: November 2016