SCIHP1367-100M

SCIHP1367 SMD POWER INDUCTORS MARKING ● Features 1. Lowest DCR/uH in this small package size. 2. Frequency range up to 5.0MHZ. 3. -55℃ to +125℃ operating temperature. 4. Handles high transient current spikes without saturation. 5. Composite construction providing extremely low buzz noise. ELECTRICAL CHARACTERISTICS Part Number Inductance Test (uH) Frequency (1) Saturation Temperature DC Current Current (4) Resistance (3) (Ω MAX) (A) (A) 100 SCIHP1367 Inductance decrease by current BCIHP1367 Inductance by current 2.2 200KHZ 4.2m 33 20 SCIHP1367-3R3M 3.3 200KHZ 6.8m 29 15 SCIHP1367-4R7M 4.7 200KHZ 11.2m 25 13.5 SCIHP1367-5R6M 5.6 200KHZ 11.5m 24 12 SCIHP1367-6R8M 6.8 200KHZ 14.9m 16.5 11.5 SCIHP1367-8R2M 8.2 200KHZ 16.6m 16 10.5 SCIHP1367-100M 10 200KHZ 18.5m 15.5 10 Inductance(uH) (µH) Inductance (2) SCIHP1367-2R2M 100 10 5R6 2R2 1. 0 0 100 1000 10000 DC (mA) DCcurrent current(mA) 100000 Temperature riserise °C ℃ Temperature SCIHP1367Temperature Temperature rise current BCIHP1367 risebyby current 80 70 60 50 40 30 20 10 0 100 5R6 5000 10000 15000 2R2 20000 25000 30000 DCDCcurrent(mA) current (mA) (1). Inductance tolerance ±20% tested at 0.25V, 0ADC and 25℃ (2). DCR measured at 25℃. (3). The DC current at which the inductance decreases by 20% from its initial value. (4). The DC current that results in a 40℃ temperature rise from 25℃ ambient (*). Part temperature (ambient + temp rise) should not exceed 125℃ under worst case operating conditions. Circuit design, component placement, PCB trace size and thickness, airflow and other cooling provisions may affect the temperature of the part. Part temperature should be verified in the end application. Click here for QUANTITY PER REEL & PACKING INFORMATION Custom versions available upon request. belfuse.com/signal © 2019 Signal Transformer –Specification subject to change without notice. 12.19 177 128 Atlantic Avenue, Lynbrook, NY 11563 Toll Free 866-239-5777 • Tel 516-239-5777 • Fax 516-239-7208 Sales@signaltransformer.com • techhelp@signaltransformer.com