MOD8ID-SHCF-U

MOD SEMI Modsemi ECC CryptoAuthentication Secure Elements Revision history Document version 1.34 Date of release 2022-06-05 Description of changes 1.33 2022-05-05 1.32 2022-03-05 1.31 1.30 2022-02-01 2021-09-01 1.00 2019-05-01 Initial Version 0.51 2017-03-19 0.50 2017-03-05 Draft Version Initial Version (Internal release) Add Part numbering MOD8ID Modsemi ECC CryptoAuthentication Secure Elements Key features • Security co-processor with cryptographic algorithm and key storage > High-end security controller > Protected Storage for Keys, Certificates or Data • Hardware Support for Asymmetric Sign,Verify,authentication,Key Agreement: > Hardware cryptographic algorithm processor: SM2, ECC-P256, SHA-256, TRNG > ECDSA: Elliptic Curve Digital Signature > ECDH: Elliptic Curve Diffie-Hellman • > SM2: Diffie-Hellman Ephemeral (ECDHE) over the SM2 elliptic curve Hardware Support for Symmetric Algorithms: > SHA-256 & HMAC > SM4: Block-cipher symmetric algorithm Encrypt/Decrypt > AES-128/256: Encrypt/Decrypt,AES-GCM/ECB/CBC • Networking Key Management Support: > security key generation and key agreement > Communication data encryption with protected > Turnkey PRF/HKDF calculation for TLS • Security update and firmware Support: > High security ECDSA firmware signature validation > Full life cycle secure boot validation > Firmware upgrade protection and data encryption protection • Internal High-Quality NIST Standard Random Number Generator(RNG) • Up to 5kB of user security storage to store extended security information • Unique Serial Number • High-Endurance Monotonic Counters • Interface Options Available400k/1 MHz Standard I2C Interface • Fast and easy integration • DFN8 and SOP8 Packages Benefits • IoT network endpoint key management & exchange/IoT Node Crypto-Protection • Encryption protection and key protection of IoT nodes • Protect the authenticity, integrity and confidentiality of your products, data and intellectual property • Secure communication and communication data encryption • Data storage protection • Lifecycle management • Platform integrity protection • Security update and firmware protection • Electronic accessories protection Description of PIN © 2021 Modsemi Inc. Pin Function GND Ground SDA Serial Data SCL Serial Clock Input VCC Power Supply NC No Connect Summary P2 MOD8ID Table of Contents Intended audience This Datasheet is intended for device integrators and board manufacturers. Key features ......................................................................................................................................................................... 2 Benefits ................................................................................................................................................................................ 2 Description of PIN ................................................................................................................................................................ 2 1. Introduction .......................................................................................................................................................................4 1.1Introduction .............................................................................................................................................................. 4 1.2 Features ..................................................................................................................................................................4 2. Interface and Schematics ................................................................................................................................................ 5 2.1System Integration Schematics ...............................................................................................................................5 2.2interface timing ........................................................................................................................................................ 6 3. Electrical Characteristics ................................................................................................................................................. 6 3.1Absolute Maximum Ratings .....................................................................................................................................6 3.2Reliability ..................................................................................................................................................................7 3.3DC Parameters: All I/O Interfaces ...........................................................................................................................7 4. Package Drawings ........................................................................................................................................................... 8 4.1SOP8 ....................................................................................................................................................................... 8 4.2DFN8 ........................................................................................................................................................................9 5. Part numbering ...............................................................................................................................................................10 © 2021 Modsemi Inc. Summary P3 MOD8ID Introduction 1. 1.1 Introduction Introduction The MOD8ID is a high-security authenticator that provides a core set of cryptographic accelerators derived from integrated asymmetric (ECC-P256/SM2) and symmetric (SHA-256/AES/SM4) security functions. In addition to the security services provided by the hardware implemented crypto engines,the device integrates a FIPS/NIST true random number generator (RNG), 5Kb of secured NVM,a decrement-only counter,The MOD8ID combine key storage with advanced hardware cryptographic accelerators to implement various authentication applications. 1.2 Features The MOD8ID based on an advanced security controller with built-in tamper proof NVM for secure storage and Symmetric/Asymmetric crypto engines to support SM2, SM4,ECC 256 and AES/SHA-256. The MOD8ID includes an security NVM which can be used for storage keys, certificates and private data，security read/write, read-only or secret data, consumption logging, and security configurations.This new security technology greatly enhances your overall system security. MO8ID has an I2C interface that supports secure communication, which can easily and fast integrate with host microcontroller software. MOD8ID covers a broad range of use cases necessary for many types of security applications that include the following:： > IoT node/edge computing node equipment > Smart home > Electronic Accessories > Mobile devices > Webcam > smart Lock © 2021 Modsemi Inc. Summary P4 MOD8ID Interface & Electrical Characteristics 2. 2.1 Interface and Schematics This section explains the schematics of the product and gives some recommendations as to how the controller should be externally connected. System Integration Schematics The following figure illustrates how to integrate MOD8ID with your local host. Figure 2 -1 System Integration Schematic Diagram Note: Value of the pull up resistors and Cvcc depend on the target application circuit and the targeted I2C frequency. © 2021 Modsemi Inc. Summary P5 MOD8ID Interface & Electrical Characteristics 2.2 interface timing The following figure shows the startup timing of the I2C interface for this case TVCC R VCC 0.4 Ts SCL SDA Power-UP data transmission Startup Interface timing Parameter Symbol Values Min Startup time Ts 25 VCC power-up time Tvcc 0.1 3. Electrical Characteristics 3.1 Absolute Maximum Ratings Parameter Unit TYPE Note or Test Condition MAX Power up to the first command execution time mS 1 Description power-up time mS Min. Max. Units TS Storage Temperature -55 125 ℃ TA Operating Temperature -40 85 ℃ VCC Operating Voltage 1.62 3.5 V VESD Human Body Model(HBM) ESD - 4000 V Note:  Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions © 2021 Modsemi Inc. Summary P6 MOD8ID Interface & Electrical Characteristics beyond those indicated in the operational sections of this specification are not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. 3.2 Reliability The MOD8ID is fabricated with high reliability NVM manufacturing technology. Table 3-1. FLASH Reliability Parameter Write Endurance Min. Typ. Max. Units 100,000 — — Write Cycles 10 — — Years Data Retention Read Endurance 3.3 Unlimited Read Cycles DC Parameters: All I/O Interfaces Table 3-2 DC Parameters on All I/O Interfaces Condition Parameter VIH VIL VOH VOL IIL IIH Icc Input high voltage, all standard inputs and bidirectional ports Input low voltage, all standard inputs and bidirectional ports All standard inputs and bidirectional ports Output low voltage, all standard inputs and two-way ports VCC Min Type Max Units 3.3V 2.0 - - V 1.8V 1.2 - - V 3.3V - - 0.8 V 1.8V - - 0.6 V 3.3V VCC-0.4 - - V 1.8V VCC-0.4 - - V 3.3V - - 0.4 V 1.8V - - 0.4 V - 1.6 - mA IO pad force -0.2V @VDDIO=3.6V，IIL= -120~-70uA IO pad force 3.8V @VDDIO=3.6V， IIH = 8uA~16uA Waiting for I/O during I/O transfers or execution of non-ECC/SM2 commands. Independent of Clock Divider value. © 2021 Modsemi Inc. 3.3V Summary P7 MOD8ID Package Drawings 4. Package Drawings 4.1 SOP8 Narrow, 3.90 mm (.150 In.) Body [SOP8] COMMON DIMENSIONS (UNITS OF MEASURE=MILLIMETERS) Symbol A A1 A2 C D Min 1.35 0.05 1.35 0.31 0.15 4.77 5.80 - - Nom - - - - - 4.90 6.00 3.90 Max 1.75 0.25 1.55 0.51 0.25 5.03 6.20 Min 0.053 0.002 0.053 0.012 0.006 0.188 Nom - - - 0.016 - Max 0.069 0.010 0.061 0.020 0.010 Unit mm Inch © 2021 Modsemi Inc. b L1 θ α β 0.40 0.85 0° 6° 11° 1.27 - 1.06 - 7° 12° - - 0.90 1.27 8° 8° 13° 0.228 - - 0.016 0.033 0° 6° 11° 0.193 0.236 0.154 0.050 - 0.042 - 7° 12° 0.198 0.244 - - 0.035 0.050 8° 8° 13° Summary E E1 e L P8 MOD8ID Package Drawings 4.2 DFN8 2x3mm body [DFN8] COMMON DIMENSIONS (UNITS OF MEASURE=MILLIMETERS) © 2021 Modsemi Inc. SYMBOL A MILLMETERS MIN NOM 0.50 0.55 MAX 0.60 A1 0.00 0.05 A2 0.152REF b 0.20 0.25 0.30 D 1.95 2.00 2.05 E 2.95 3.00 3.05 D1 1.50 1.60 1.70 E1 0.10 0.20 0.30 e Nd L 0.50BSC 1.50BSC 0.30 0.35 0.40 L1 0.05 0.10 0.15 h 0.10 0.15 0.20 Summary 0.02 P9 5. Part numbering To order or obtain information, e.g., on pricing or delivery, refer to the factory or the listed sales office. Examples: • MOD8ID-SHCF-U: SOP8 (0.150” Wide Body), I2C, Tube • MOD8ID-DMCF-R: DFN(2 x 3 x 0.6 mm Body), I2C, Type and Reel Trademarks All referenced product or service names and trademarks are the property of their respective owners. Edition 2020-07-24 Published by Modsemi Inc.© 2020 Modsemi Inc. All Rights Reserved.Do you have a question about this document? Document reference IMPORTANT NOTICE The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics .With respect to any examples, hints or any typical values stated herein and/or any information regarding the application of the product, Modsemi hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of non-infringement of intellectual property rights of any third party.In addition, any information given in this document is subject to customer’s compliance with its obligations stated in this document and any applicable legal requirements, norms and standards concerning customer’s products and any use of the product of Modsemi in customer’s applications. The data contained in this document is exclusively intended for technically trained staff. It is the responsibility of customer’s technical departments to evaluate the suitability of the product for the intended application and the completeness of the product information given in this document with respect to such application For further information on the product, technology delivery terms and conditions and prices please contact your nearest Modsemi office (www.modsemi.com). WARNINGS Due to technical requirements products may contain dangerous substances. For information on the type in question please contact your nearest Modsemi office. Except as otherwise explicitly approved by Modsemi in a written document signed b authorized representatives of Modsemi, Modsemi’s products may not be used in any applications where a failure of the product or any consequences of the use thereof can reareasonably be expected to result in personal injury.