KL101M500L410A

ALUMINUM ELECTROLYTIC CAPACITOR ▪ KL SERIES KL SERIES ▪ HIGH VOLTAGE, AUTOMOTIVE 105°C TYPE KEY FEATURES ▪ ▪ ▪ ▪ ▪ ALUMINUM ELECTROLYTIC CAPACITOR ▪ THT type Endurance: 105°C ▪ 5 000 hours High voltage version up to 500V High reliability AEC-Q200 version available SPECIFICATIONS Items Operating Temperature Range Rated Voltage Range VR Surge Voltage VS Capacitance Range CR Cap. Tolerance ΔC Leakage Current (20°C ▪ VR applied) ILEAK Dissipation Factor % (20°C ▪ 120Hz) tanδ Low Temperature Characteristics at 120Hz Z ratio max. Performance Characteristics -40 ~ +105°C -25 ~ +105°C 160 ~ 400V DC 450V ~ 500V DC (VR ≤ 315V): VS = 1.15∙VR (VR > 315V): VS = 1.10∙VR 3.3 ~ 330µF 2.2 ~ 180µF ±20% (120Hz ▪ 20°C) CR∙VR ≤ 1000 ≤ 0.1∙CR∙VR + 40µA (After 1 minute) CR∙VR > 1000 ≤ 0.04∙CR∙VR + 100µA (After 1 minute) [ ILEAK (µA) ; CR (µF) ; VR (V) ] VR (V DC) tanδ (%) 160 12 200 12 250 12 350 15 400 15 450 17 500 20 VR (V DC) 160 3 6 200 3 6 250 3 6 350 6 6 400 6 6 450 6 - 500 6 - Z-25°C/Z+20°C Z-40°C/Z+20°C ~ Lifetime Test Endurance 105°C (VR & IR applied) Shelf Life 105°C (VR = 0) CapXon_Ver. 001 – 03/31/2020 Test 5 000 hours △C/CR ≤ ±20% of initial measured value tanδ ≤ 200% of initial specified value ILeak ≤ the initial specified value Test 1 000 hours △C/CR ≤ ±20% of initial measured value tanδ ≤ 200% of initial specified value ILeak ≤ the initial specified value Before measurement: Restore capacitor to 20°C, apply VR for 30 min according JIS-C-5101-4 1 For further information please contact sales@capxon.org Document Number: KL series ALUMINUM ELECTROLYTIC CAPACITOR ▪ KL SERIES STANDARD RATINGS VR (V) 160 200 Part number shows bulk version with straight leads CR (µF) øD (mm) L (mm) IR ▪ Max. Ripple Current +105°C ▪ 120Hz (mA rms) CapXon Part Number 3.3 4.7 10 10 15 22 22 33 33 33 47 47 68 68 100 100 100 120 150 180 220 220 270 330 330 3.3 4.7 6.8 10 10 10 15 22 22 33 33 47 68 68 100 100 120 150 10 10 10 10 10 10 10 10 10 13 10 13 13 13 13 16 16 16 16 16 16 18 18 18 18 10 10 10 10 10 10 10 10 10 10 13 13 13 16 16 16 16 16 12.5 12.5 12.5 16 16 16 20 16 20 20 20 20 20 25 25 20 25 20 25 31.5 31.5 25 31.5 31.5 40 12.5 12.5 12.5 12.5 16 20 16 16 20 20 20 20 25 20 20 25 25 25 52 60 104 115 150 190 210 235 258 300 270 310 430 470 540 540 590 560 650 750 820 710 880 930 1000 52 60 70 104 115 125 150 210 230 290 350 380 530 530 570 610 700 700 KL3R3M160G125A ꙱ KL4R7M160G125A ꙱ KL100M160G125A ꙱ KL100M160G160A ꙱ KL150M160G160A ꙱ KL220M160G160A ꙱ KL220M160G200A ꙱ KL330M160G160A ꙱ KL330M160G200A ꙱ KL330M160I200A ꙱ KL470M160G200A ꙱ KL470M160I200A ꙱ KL680M160I200A ꙱ KL680M160I250A ꙱ KL101M160I250A ꙱ KL101M160J200A ꙱ KL101M160J250A ꙱ KL121M160J200A ꙱ KL151M160J250A ꙱ KL181M160J315A ꙱ KL221M160J315A ꙱ KL221M160K250A ꙱ KL271M160K315A ꙱ KL331M160K315A ꙱ KL331M160K400A ꙱ KL3R3M200G125A ꙱ KL4R7M200G125A ꙱ KL6R8M200G125A ꙱ KL100M200G125A ꙱ KL100M200G160A ꙱ KL100M200G200A ꙱ KL150M200G160A ꙱ KL220M200G160A ꙱ KL220M200G200A ꙱ KL330M200G200A ꙱ KL330M200I200A ꙱ KL470M200I200A ꙱ KL680M200I250A ꙱ KL680M200J200A ꙱ KL101M200J200A ꙱ KL101M200J250A ꙱ KL121M200J250A ꙱ KL151M200J250A ꙱ ꙱: Enter blank for Standard version ꙱: Enter X for AEC-Q200 version See “PACKAGING INFORMATION” to taped or formed products. CapXon_Ver. 001 – 03/31/2020 2 For further information please contact sales@capxon.org Document Number: KL series ALUMINUM ELECTROLYTIC CAPACITOR ▪ KL SERIES STANDARD RATINGS VR (V) 200 250 350 400 Part number shows bulk version with straight leads CR (µF) øD (mm) L (mm) IR ▪ Max. Ripple Current +105°C ▪ 120Hz (mA rms) CapXon Part Number 150 180 220 270 330 4.7 6.8 10 10 15 22 22 33 33 47 68 68 68 100 100 100 100 120 150 150 180 220 220 4.7 6.8 10 10 15 22 33 33 47 47 68 100 100 3.3 4.7 16 18 18 18 18 10 10 10 10 10 10 13 13 13 13 16 16 18 16 16 18 18 18 18 18 18 18 18 10 10 10 13 13 13 13 16 16 16 16 18 18 10 10 31.5 31.5 31.5 40 45 12.5 12.5 16 20 16 20 20 20 25 25 20 25 20 25 31.5 25 31.5 31.5 31.5 35.5 40 35.5 40 12.5 16 20 20 20 20 25 20 25 31.5 35.5 31.5 35.5 12.5 16 750 830 970 1100 1250 60 75 160 170 180 250 290 360 380 430 530 550 550 630 700 680 750 790 840 880 980 960 1020 65 100 170 180 200 290 320 320 430 440 550 750 780 55 100 KL151M200J315A ꙱ KL181M200K315A ꙱ KL221M200K315A ꙱ KL271M200K400A ꙱ KL331M200K450A ꙱ KL4R7M250G125A ꙱ KL6R8M250G125A ꙱ KL100M250G160A ꙱ KL100M250G200A ꙱ KL150M250G160A ꙱ KL220M250G200A ꙱ KL220M250I200A ꙱ KL330M250I200A ꙱ KL330M250I250A ꙱ KL470M250I250A ꙱ KL680M250J200A ꙱ KL680M250J250A ꙱ KL680M250K200A ꙱ KL101M250J250A ꙱ KL101M250J315A ꙱ KL101M250K250A ꙱ KL101M250K315A ꙱ KL121M250K315A ꙱ KL151M250K315A ꙱ KL151M250K355A ꙱ KL181M250K400A ꙱ KL221M250K355A ꙱ KL221M250K400A ꙱ KL4R7M350G125A ꙱ KL6R8M350G160A ꙱ KL100M350G200A ꙱ KL100M350I200A ꙱ KL150M350I200A ꙱ KL220M350I200A ꙱ KL330M350I250A ꙱ KL330M350J200A ꙱ KL470M350J250A ꙱ KL470M350J315A ꙱ KL680M350J355A ꙱ KL101M350K315A ꙱ KL101M350K355A ꙱ KL3R3M400G125A ꙱ KL4R7M400G160A ꙱ ꙱: Enter blank for Standard version ꙱: Enter X for AEC-Q200 version See “PACKAGING INFORMATION” to taped or formed products. CapXon_Ver. 001 – 03/31/2020 3 For further information please contact sales@capxon.org Document Number: KL series ALUMINUM ELECTROLYTIC CAPACITOR ▪ KL SERIES STANDARD RATINGS VR (V) 400 450 Part number shows bulk version with straight leads CR (µF) øD (mm) L (mm) IR ▪ Max. Ripple Current +105°C ▪ 120Hz (mA rms) CapXon Part Number 6.8 6.8 10 10 10 15 15 22 22 33 33 47 47 47 68 68 82 100 100 120 120 150 150 180 220 2.2 3.3 4.7 4.7 6.8 6.8 10 10 10 15 22 22 22 33 33 47 47 56 10 10 10 10 13 10 13 13 16 16 16 16 16 16 16 16 16 16 18 16 18 16 18 18 18 10 10 10 10 10 10 10 13 13 16 13 16 16 16 18 16 18 16 16 20 16 20 20 16 20 25 20 20 25 20 25 31.5 25 31.5 31.5 31.5 35.5 35.5 31.5 40 31.5 40 45 12.5 16 12.5 16 16 20 20 20 25 20 20 20 25 25 25 31.5 25 31.5 120 125 156 170 200 156 200 320 320 400 430 420 450 530 480 530 580 710 750 800 800 920 890 1060 1200 45 65 95 105 125 140 170 190 220 270 280 320 360 440 460 480 450 530 KL6R8M400G160A ꙱ KL6R8M400G200A ꙱ KL100M400G160A ꙱ KL100M400G200A ꙱ KL100M400I200A ꙱ KL150M400G160A ꙱ KL150M400I200A ꙱ KL220M400I250A ꙱ KL220M400J200A ꙱ KL330M400J200A ꙱ KL330M400J250A ꙱ KL470M400J200A ꙱ KL470M400J250A ꙱ KL470M400J315A ꙱ KL680M400J250A ꙱ KL680M400J315A ꙱ KL820M400J315A ꙱ KL101M400J315A ꙱ KL101M400K355A ꙱ KL121M400J355A ꙱ KL121M400K315A ꙱ KL151M400J400A ꙱ KL151M400K315A ꙱ KL181M400K400A ꙱ KL221M400K450A ꙱ KL2R2M450G125A ꙱ KL3R3M450G160A ꙱ KL4R7M450G125A ꙱ KL4R7M450G160A ꙱ KL6R8M450G160A ꙱ KL6R8M450G200A ꙱ KL100M450G200A ꙱ KL100M450I200A ꙱ KL100M450I250A ꙱ KL150M450J200A ꙱ KL220M450I200A ꙱ KL220M450J200A ꙱ KL220M450J250A ꙱ KL330M450J250A ꙱ KL330M450K250A ꙱ KL470M450J315A ꙱ KL470M450K250A ꙱ KL560M450J315A ꙱ ꙱: Enter blank for Standard version ꙱: Enter X for AEC-Q200 version See “PACKAGING INFORMATION” to taped or formed products. CapXon_Ver. 001 – 03/31/2020 4 For further information please contact sales@capxon.org Document Number: KL series ALUMINUM ELECTROLYTIC CAPACITOR ▪ KL SERIES STANDARD RATINGS VR (V) 450 500 Part number shows bulk version with straight leads CR (µF) øD (mm) L (mm) IR ▪ Max. Ripple Current +105°C ▪ 120Hz (mA rms) CapXon Part Number 68 68 68 82 100 120 150 180 4.7 6.8 10 22 33 47 47 56 56 68 68 68 82 100 100 120 16 18 18 16 16 18 18 18 13 13 13 16 16 16 18 16 18 16 18 18 18 18 20 22 35.5 25 31.5 35.5 35.5 35.5 40 45 20 20 25 25 31.5 35.5 31.5 40 31.5 45 35.5 40 40 45 40 45 600 580 620 680 750 840 970 1090 82 96 130 210 280 360 360 420 400 480 460 490 540 630 660 800 KL680M450J355A ꙱ KL680M450K250A ꙱ KL680M450K315A ꙱ KL820M450J355A ꙱ KL101M450J355A ꙱ KL121M450K355A ꙱ KL151M450K400A ꙱ KL181M450K450A ꙱ KL4R7M500I200A ꙱ KL6R8M500I200A ꙱ KL100M500I250A ꙱ KL220M500J250A ꙱ KL330M500J315A ꙱ KL470M500J355A ꙱ KL470M500K315A ꙱ KL560M500J400A ꙱ KL560M500K315A ꙱ KL680M500J450A ꙱ KL680M500K355A ꙱ KL680M500K400A ꙱ KL820M500K400A ꙱ KL101M500K450A ꙱ KL101M500L400A ꙱ KL121M500M450A ꙱ ꙱: Enter blank for Standard version ꙱: Enter X for AEC-Q200 version See “PACKAGING INFORMATION” to taped or formed products. CapXon_Ver. 001 – 03/31/2020 5 For further information please contact sales@capxon.org Document Number: KL series ALUMINUM ELECTROLYTIC CAPACITOR ▪ KL SERIES ±0. d±0.0 DIMENSIONS ▪ All dimensions in mm ±0. ±a øD F ød 10 5 13 5 mi n. 16 7.5 18 7.5 0.8 0.6 ø D < 16 a 1 min. 1.5 ø D = 16 22 10 ø D = 18 ø D > 18 L = 25 to 35.5 L < 25 and L ≥ 40 L = 25 to 31.5 L < 25 and L ≥ 35.5 1.5 2 1.5 2 2 MULTIPLIER Kf for RIPPLE CURRENT vs. FREQUENCY CR (µF) / Frequency (Hz) 100/120 1k 10k ≥ 50k 3.3 < CR ≤ 330 1 1.5 1.7 1.9 PRECAUTIONS, GUIDELINES AND PACKAGING INFORMATON Unless otherwise agreed in individual specifications, all products are subject to our “General Precautions and Guidelines” as well as our “Packaging Information”. Please refer to the following links in the table. General Precautions & Guidelines CapXon_Ver. 001 – 03/31/2020 Packaging Information 6 For further information please contact sales@capxon.org 3D Models Document Number: KL series ALUMINUM ELECTROLYTIC CAPACITOR ▪ KL SERIES DISCLAIMER All product related data (e.g. specification, statements and general information) are subject to change without any notice. It is necessary that the customer observes all product related technical / application information and handling instructions. CapXon products are designed and manufactured according to severe quality and safety standards. Under no circumstance, CapXon warrants that any CapXon product is suitable for the purposes intended for your application, even CapXon knows the application. It is customer's duty and obligation to check and make sure that CapXon products are suitable for the purposes intended and select the correct and proper CapXon product. Customers are requested to perform a sufficient validation and reliability evaluation to assure needed safety level and reliability performance by suitable designs and to apply proper safeguards (e.g. redundancies, protective circuits). Particular operating conditions (ambient temperature, ripple current, voltage, thermal resistance, etc.) as well as storage, production or assembly may affect the performance and the lifetime of the capacitor. Please consult CapXon for lifetime estimation, failure mode considerations or worst-case scenarios according to the product technology, product tolerances / deviations or change of the characteristics of the capacitor due to shipment, storage, handling, production and usage. or aerospace or military application, life‐saving, life‐sustaining, safety critical applications or any application where failure may cause severe personal injury or death, please consult us before design‐in the capacitor in your application. Except for the written expressed warranties, CapXon does not impliedly, by assumption or whatever else, warrant, undertake, promise any other warranty or guaranty for any CapXon product. For further information, please visit our website www.capxongroup.com or contact CapXon directly. CapXon_Ver. 001 – 03/31/2020 7 For further information please contact sales@capxon.org Document Number: KL series