XIHEELNAND-5.5296M

X’TAL 5.529600 MHz SPECIFICATION RoHS Compliant APPROVAL SHEET Issued No. : DESCRIPTION : NOMINAL FREQ. : 5.529600 MHz TAITIEN P/N : 05301-X-611-3 TAITIEN MODEL : XIHEELNAND-5.529600MHz REVISION : 1 DATE : 12/10/2020 DIP 11.1*4.68 METAL CAN CRYSTAL QA Checked CUSTOMER : CUSTOMER P/N : Prepared Customer Signature Approved: Date: www.taitien.com Page 1 X’TAL 5.529600 MHz SPECIFICATION REVISION HISTORY Rev. Revised Page 01 N/A Revision Content Initial Released Date 06/20/2016 Ref. No. N/A Reviser Y.P.MA Please note that placing order with Taitien constitutes acknowledgement that you have read and agree to Taitien’s Terms and Conditions. Please refer to our website for more details. Thank you for choosing Taitien! Remedies and Limitation of Liability: BUYER’S SOLE AND EXCLUSIVE REMEDY AND TAITIEN’S SOLE LIABILITY, WITH RESPECT TO ANY BREACH OF WARRANTY, SHALL BE AT TAITIEN’S OPTION: (A) REPAIR OR REPLACEMENT OF THE DEFECTIVE OR NONCONFORMING CRYSTALS OR (B) REFUND OF BUYER’S PURCHASE PRICE FOR THE DEFECTIVE OR NONCONFORMING CRYSTALS. IN NO EVENT SHALL TAITIEN’S TOTAL LIABILITY FOR ANY AND ALL LOSSES AND DAMAGES ARISING OUT OF ANY CAUSE (INCLUDING, BUT NOT LIMITED TO, CONTRACT, NEGLIGENCE, STRICT LIABILITY OR OTHER TORT) EXCEED THE PURCHASE COST OF THE CRYSTALS. IN NO EVENT SHALL TAITIEN BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL OR PUNITIVE DAMAGES. www.taitien.com Page 2 X’TAL 5.529600 MHz SPECIFICATION CONTENT SPECIFICATIONS ELECTRICAL SPECIFICATIONS PAGE 4~5 PRODUCT DIMENSIONS 6 PRODUCT IDENTIFICATION (MARKING) 6 PACKAGE INFORMATION 7 www.taitien.com Page 3 X’TAL 5.529600 MHz SPECIFICATION  ELECTRICAL SPECIFICATIONS Parameter 1-1 Nominal Frequency 1-2 Frequency Tolerance. Min. Typ. Max. 5.529600 -30 Units Test Condition MHz +30 ppm 1-3 Operating Temperature range -40 +85 o 1-4 Storage Temperature range -55 +125 o 1-5 Temperature Characteristics -30 +30 1-6 Nominal Load Capacitance 1-7 Series Resistance 80 Ω 1-8 Shunt Capacitance 7 pF 1-9 Motion Capacitance 1-10 Motion Inductance 1-11 Q factor K 1-12 Spurious Response dB 1-13 Frequency Pull ability 1-14 C0/C1 Ratio 1-15 Aging 1-16 Insulation Resistance 500MΩ Min. @ DC100V 1-17 Nominal Drive Level 10 1-18 Dependency Condition 20 C C ppm at 25℃+/-2℃ -40℃ to +85℃ pF fF mH ppm/pF -5 +5 ppm/year μw μw into 25Ω Drive Level Dependency 1-19 Ω Resistance Max. Minus Min. Drive Level Dependency 1-20 ppm Frequency Max. Minus Min. Drive Level Dependency 1-21 Ω Resistance Max. www.taitien.com Page 4 X’TAL 5.529600 MHz SPECIFICATION  CUSTOMER SPECIAL REQUIREMENT 2  ENVIRONMENTAL Parameter 3-1 3-2 3-3 Reference Std. Test Condition MIL-STD-883 2007 Condition A 10~2000Hz, 1.52mm, 20g, each JESD22-B103 Condition 1 axis for 4 hrs MIL-STD-883 1010 Condition B -55℃, 125℃; soak time is 10 JESD22-A104 Condition B mins, with total 200 cycles MIL-STD-883 2002 Condition B 1500G, half-sine, 0.5ms, each JESD22-B104 Condition B axis for 3 times. Vibration Test Thermal Shock Mechanical Shock www.taitien.com Page 5 X’TAL 5.529600 MHz SPECIFICATION  PRODUCT DIMENSIONS  DIMENSIONS LEAD SIZE: L(mm) 13.2+/-1 20.0+/-1 3.6+/-0.2 3.8+/-0.3 4.5+/-0.5 16.0+/-1 4.0+/-0.5 Refer tp SPEC. Sheet www.taitien.com Page 6 X’TAL 5.529600 MHz SPECIFICATION  PACKAGE INFORMATION www.taitien.com Page 7