Electronic Components
High Quality
CAPACITORS
Electronic Components
High Quality
CAPACITORS
CONDUCTIVE POLYMER HYBRID ALUMINUM ELECTROLYTIC CAPACITORS
ALUMINUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE
ALUMINUM ELECTROLYTIC CAPACITORS
CONDUCTIVE
POLYMER
HYBRID
ALUMINUM
ELECTROLYTIC
CAPACITORS
ELECTRIC
DOUBLE
LAYER
CAPACITORS
“DYNACAP”
ALUMINUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE
ALUMINUM ELECTROLYTIC CAPACITORS
ELECTRIC DOUBLE LAYER CAPACITORS “DYNACAP®
PLASTIC FILM CAPACITORS
CO., LTD.
CAT.No.2021/2022E
CO., LTD.
CAT.No.2020/2021E
■ Notice for ELNA products
Please read this notice before using the ELNA products.
REMINDERS
■ Product Information in this Catalog
Product information in this catalog is as of December 2020. All of the
contents specified herein and production status of the products listed
in this catalog are subject to change without notice due to technical
improvement of our products, etc. Therefore, please check for the
latest information carefully before practical application or use of our
products.
Please note that ELNA shall not be in any way responsible for any
damages and defects in products or equipment incorporating our
products, which are caused under the conditions other than those
specified in this catalog or individual product specification sheets.
■ Approval of Product Specifications
Please contact ELNA for further details of product specifications as
the individual product specification sheets are available. When using
our products, please be sure to approve our product specifications or
make a written agreement on the product specification with ELNA in
advance.
■ Pre-Evaluation in the Actual Equipment and Conditions
Please conduct validation and verification of our products in actual
conditions of mounting and operating environment before using our
products.
■ Limited Application
1. Equipment Intended for Use
The products listed in this catalog are intended for generalpurpose and standard use in general electronic equipment (e.g.,
AV equipment, OA equipment, home electric appliances, office
equipment, information and communication equipment including,
without limitation, mobile phone, and PC) and other equipment
specified in this catalog or the individual product specification
sheets.
ELNA has the line-up of the products intended for use in
automotive electronic equipment, telecommunications
infrastructure and industrial equipment, or medical devices
classified as GHTF Classes A to C (Japan Classes I to III).
Therefore, when using our products for these equipment, please
check available applications specified in this catalog or the
individual product specification sheets and use the corresponding
products.
2. Equipment Requiring Inquiry
Please be sure to contact ELNA for further information before
using the products listed in this catalog for the following
equipment (excluding intended equipment as specified in this
catalog or the individual product specification sheets) which may
cause loss of human life, bodily injury, serious property damage
and/or serious public impact due to a failure or defect of the
products and/or malfunction attributed thereto.
(1) Transportation equipment (automotive powertrain control
system, train control system, and ship control system, etc.)
(2) Traffic signal equipment
(3) Disaster prevention equipment, crime prevention equipment
(4) Medical devices classified as GHTF Class C (Japan Class III)
(5) Highly public information network equipment, data- processing
equipment (telephone exchange, and base station, etc.)
(6) Any other equipment requiring high levels of quality and/or
reliability equal to the equipment listed above
3. Equipment Prohibited for Use
Please do not incorporate our products into the following
equipment requiring extremely high levels of safety and/or
reliability.
(1) Aerospace equipment (artificial satellite, rocket, etc.)
(2) Aviation equipment *1
(3) Medical devices classified as GHTF Class D (Japan Class IV),
implantable medical devices *2
(4) Power generation control equipment (nuclear power,
hydroelectric power, thermal power plant control system, etc.)
(5) Undersea equipment (submarine repeating equipment,
underwater work equipment, etc.)
(6) Military equipment
(7) Any other equipment requiring extremely high levels of safety
and/or reliability equal to the equipment listed above
*Notes:
1. There is a possibility that our products can be used only for aviation equipment
that does not directly affect the safe operation of aircraft (e.g., in-flight
entertainment, cabin light, electric seat, cooking equipment) if such use meets
requirements specified separately by ELNA. Please be sure to contact ELNA for
further information before using our products for such aviation equipment.
2. Implantable medical devices contain not only internal unit which is implanted in a
body, but also external unit which is connected to the internal unit.
4. Limitation of Liability
Please note that unless you obtain prior written consent of ELNA,
ELNA shall not be in any way responsible for any damages
incurred by you or third parties arising from use of the products
listed in this catalog for any equipment that is not intended for
use by ELNA, or any equipment requiring inquiry to ELNA or
prohibited for use by ELNA as described above.
■ Safety Design
When using our products for high safety and/or reliability-required
equipment or circuits, please fully perform safety and/or reliability
evaluation. In addition, please install (i) systems equipped with a
protection circuit and a protection device and/or (ii) systems equipped
with a redundant circuit or other system to prevent an unsafe status
in the event of a single fault for a failsafe design to ensure safety.
■ Intellectual Property Rights
Information contained in this catalog is intended to convey examples
of typical performances and/or applications of our products and is
not intended to make any warranty with respect to the intellectual
property rights or any other related rights of ELNA or any third parties
nor grant any license under such rights.
■ Limited Warranty
Please note that the scope of warranty for our products is limited to
the delivered our products themselves and ELNA shall not be in any
way responsible for any damages resulting from a failure or defect
in our products. Notwithstanding the foregoing, if there is a written
agreement (e.g., supply and purchase agreement, quality assurance
agreement) signed by ELNA and your company, ELNA will warrant
our products in accordance with such agreement.
■ ELNA’s Official Sales Channel
The contents of this catalog are applicable to our products which are
purchased from our sales offices or authorized distributors (hereinafter
“ELNA’s official sales channel”). Please note that the contents of this
catalog are not applicable to our products purchased from any seller
other than ELNA’s official sales channel.
■ Caution for Export
Some of our products listed in this catalog may require specific
procedures for export according to“U.S. Export Administration
Regulations”,“Foreign Exchange and Foreign Trade Control Law”
of Japan, and other applicable regulations. Should you have any
questions on this matter, please contact our sales staff.
CAT.No.2021/2022E
ENVIRONMENTAL
ENVIRONMENTAL (Green
(Green Cap)
Cap®)
■
“GREEN CAP”
“GREEN CAP”, ELNA considers the global environment and it is a product that doesn't use the hazardous substance
and “Lead Free” in the plating of terminals and outer Sleeves.
The product in this catalog is 'GREEN CAP'.
The hazardous substance is
Cadmium and its compounds, Lead and its compounds
Hexavalent chromium compounds, Mercury and its compounds
PBB, PBDE : Specified bromine-based flame retardants
DEHP : Di(2-ethylhexyl)phthalate, BBP : Bis(butylbenzyl) phthalate
DBP : Dibutyl phthalate, DIBP : Diisobutyl phthalate
■Regarding to various environmental Regulations
It suits with the following EU regulations.
・End-of-Life Vehicle Directive
・Restriction of the Use of Certain Hazardous Substances In Electrical and Electronic Equipment.
・Waste Electrical and Electronic Equipment.
For details, please check our website.(http://www.elna.co.jp/en/company/environment/law.html)
etc.
If you need “Halogen-Free” products, please consult with us.
Terminal area plating material and sleeve material
● Aluminum
(Polymer hybrid,Conductive Polymer Solid Electrolyte) electrolytic capacitors
Category
Terminal area plating
Plating thickness
Sn-Bi
12µm
Sleeve less
φ8,10
Sn-Bi
12µm
Sleeve less (or PET)
φ12.5
Sn 100%
12µm
Sleeve less (or PET)
φ16 to 18
Sn 100%
12µm
Sleeve less
Supplementary terminal of RT* type
Sn 100%
12µm
Sleeve less (or PET)
Lead terminal
Sn 100%
12µm
Sleeve less (or PET)
Snap-in
Sn 100%
12µm
PET
φ3 to 6.3
SMD
(Chip type)
ー
Screw terminal
● Electric
Sleeve
PET
double layer capacitors
Terminal area plating
Plating thickness
Single cell
Sn 100% or Sn+Cu
5µm
Sleeve less
Piled cell
Sn 100%
5µm
PET
Lead type
Sn 100%
5µm
PET
Lead terminal
Sn 100%
12µm
PET
Snap-in terminal
Sn 100%
12µm
PET
Category
Coin cell
Large
capacitance
SMD
Sleeve
Note : Sn : Tin Bi : Bismuth Cu : Copper
Please inquire when hoping excluding the above-mentioned terminal plating and sleeve.
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
■ About the Sn whisker
1. Sn whisker-generating mechanism on the lead wire
On the surface of the lead wire, Sn and aluminum will get mixed instead of getting dissolved.
The surface condition is complex, aluminum will expand due to the heat and humid causing the oxidation
and hydration. This reaction will cause the inner stress and influence the development of the whisker.
2. Generation control of the Sn whisker
In the past, Sn whisker was reduced by adding a lead(Pb). Aluminum electrolytic capacitor was also using
the Sn-plate with Pb on the lead wire.
But due to environmental regulation such as the “ELV” and “RoHS”, Pb was strictly prohibited since 2000.
Lead wire not containing the Pb was used, which caused the Sn whisker problem to happen again.
Since Sn whisker is influenced by the mixture of aluminum, method of reducing the aluminum on the welding
surface was to clean the lead terminal using the alkali.
However since the welding area of the large case size is larger compared to the small ones, whisker will
generate even if it is cleaned by alkali. This whisker will scatter outside of the capacitor and potentially
cause the short-circuit. Countermeasure of keeping the whisker inside the capacitor is being discussed.
3. Prevention of scattering of Sn whisker
In the past Sn-plate with Pb was used and recently plate with Bi is being introduced to prevent the whisker
from generating. However the whisker will still generate under the temperature and moisture condition.
Therefore, the current method of preventing the whisker will not completely prevent the whisker from
generating.
In our company, we are developing and supplying products with design of preventing the whisker from
scattering outside the capacitor.
This design corresponds to series such as the RJD and RJE for 105℃ use, RJK, RKD and RPK for 125℃
use.
If it is required for the other series, please feel free to make an inquiry.
Sectional view of capacitor
Standard type
Whisker proof type
Rubber hole
Not covered
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
Rubber hole
covered
CAT.No.2021/2022E
PACKAGING SPECIFICATION
■ Ordering Information
Please order by the multiples of the minimum order quantity (MOQ).
Aluminum Electrolytic Capacitors
Classification
Aluminum Electrolytic
Capacitors With
Chip
Conductive Polymer
Type
Solid Electrolyte
Conductive Polymer
Hybrid Aluminum
Electrolytic Capacitors 04 Type
Chip Type
04 Type
LA*, LT*
331Type or Others
Case Size
φD×L (mm)
φ5 to φ6.3
φ8,φ10×8.7 to 10
φ10×12.5
φ12.5×13.5
φ8
φ10
φ4
φ5 to φ6.3×4.5 to 7.7,φ8×6.5
φ8 to φ10×10 to 10.5
φ12.5×13.5
φ16×16.5,φ18×16.5
φ16×21.5,φ18×21.5
φ4 to φ5×5,φ4×7
φ5×7
φ6.3×5,φ6.3×7
φ8×5 to 7
φ5 to φ6.3×11,11.5
φ8×11.5,12
φ8×15
φ8×20
φ10×12.5
φ10×16
φ10×20
φ10×25 to 30
φ12.5×15 to 20
φ12.5×25
φ12.5×30
φ12.5×35
φ12.5×40
φ16×16 to 25
φ16×31.5 to 35.5
φ16×40
φ18×16
φ18×20
φ18×25
φ18×31.5 to 35.5
φ18×40 to 50
φ20×25 to 50
φ22×40 to 50
Long lead
(Q'ty/Bag)
MOQ/Box
-
-
-
-
-
-
-
-
200
2,000
200
1,000
-
-
-
-
-
-
-
-
-
-
-
-
200
2,000
200
2,000
200
2,000
200
2,000
200
2,000
200
2,000
200
1,000
200
1,000
200
1,000
200
1,000
200
1,000
200
1,000
100
1,000
100
500 (1000)
100
500
100
500
100
500 (100)
100
500
50
200 (400)
50 (100)
100
50
100
50 (100)
100 (500)
50 (100)
100 (400)
50
100
50
250 (100)
50
100
50
100 (200)
φ22 to φ25
φ30 to φ35
φ36 to φ101
-
-
-
Quantity (PCS.)
Forming lead
Taping (flat box)
(Q'ty/Bag)
MOQ/Box
MOQ/Box
-
-
-
-
-
-
-
-
-
-
-
-
200
2,000
1,000
200
1,000
500
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
200
5,000
2,000
200
4,000
2,000
200
2,000
2,000
200
2,000
1,000
200
2,000
2,000
200
2,000
1,000
200
1,000
1,000
200
1,000
1,000
200
1,000
500
200
1,000
500
200
1,000
500
100 (200)
500 (1000)
500
100
1000 (500)
500
100
1000 (500)
500
200 (100)
2000 (500)
500
200 (100)
2000 (500)
500
200 (100)
2000 (500)
-
100
1000 (100)
-
100
1000 (100)
-
100
800 (100)
-
100
1000 (100)
-
100
1000 (100)
-
100
1000 (100)
-
100
1000 (100)
-
100
800 (100)
-
100
600 (100)
-
100
400 (100)
-
Taping (reel)
MOQ/Reel
(Q'ty/Box)
1,000
5,000
500
2,000
400
1,600
200
1,000
-
-
-
-
2,000
10,000
1,000
5,000
500
2,000
200
1,000
125
250
75
150
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
100
50
*
(Note) It may become the numerical value in ( ).
* Please inquire.
Electric Double Layer Capacitors
Series
Case size
φD×L(mm)
DX,DXJ,DXN,DXS(H or V Terminal)
DX,DXJ,DXN
(V Terminal)
DH,DHL,DHC,DBJ
DB,DBN,DBS
DS,DSK
DVN,DVS
DVL
φ11.5
φ19
φ13.5
φ21.5
φ6.8
φ12.5×8.5
φ12.5×10.5
Series
Case size
φD×L(mm)
DDU
DUK
DZ
DZN
DZH
φ6.3
φ8×12
φ8×15 to 22
φ10×20 to 25
φ10×30 to 35
φ12.5×25
φ12.5×35
φ16×20 to 25
φ16×31.5 to 35.5
φ16×40
φ18×35
φ18×40
φ25
φ35
DZP
8.5×17×16
8.5×17×24
10.5×21×29
10.5×21×39
Long lead
(Q'ty/Bag)
MOQ/Box
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Long lead
(Q'ty/Bag)
MOQ/Box
200
2,000
200
2,000
200
1,000
200
1,000
200
1,000
100
500
100
500
100
500
50
200
50
100
50
100
50
250
-
50 or 100*
-
50 or 100*
-
Quantity (PCS.)
Standard lead
Taping (f lat box)
Taping (reel)
(Q'ty/Bag)
MOQ/Box
MOQ/Box
MOQ/Reel
(Q'ty/Box)
200
2,000
-
-
-
100
500
-
-
-
200
1,000
-
-
-
100
500
-
-
-
-
-
-
1,500 to 2,000* 6,000 to 8,000*
-
-
-
300
1,500
-
-
-
250
1,250
Quantity (PCS.)
Forming lead
Taping (f lat box)
Taping (reel)
(Q'ty/Bag)
MOQ/Box
MOQ/Box
MOQ/Reel
(Q'ty/Box)
200
2,000
2,000
-
-
200
2,000
1,000
-
-
200
1,000
1,000
-
-
100
500
500
-
-
100
500
500
-
-
100
1,000
500
-
-
200
2,000
-
-
-
100
1,000
-
-
-
100
1,000
-
-
-
100
800
-
-
-
100
1,000
-
-
-
100
800
-
-
-
-
-
-
-
-
-
-
-
-
-
*
* Please inquire.
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
ALUMINUM ELECTROLYTIC CAPACITORS
■ Type List for Aluminum Electrolytic Capacitors
★ : New series
☆ : Upgrade
Hybrid
Min.
Max.
Rated Voltage Rated Capacitance
Range
Range
(V.DC)
(µF)
Min.
Max.
Size range
φD x L (mm)
Min.
Max.
Note
Life time
Range
(hours)
JIS
Configurati
Category
Temp. Range
(℃)
Min.
Max.
Min.
Max.
HV
Low ESR Hybrid Polymer Chip
−55
+105
10000
6.3
100
10
820
5×5.8
12.5×13.5 Silver
32
HT
Low ESR Hybrid Polymer Chip, Vibration resistance
−55
+105
10000
6.3
100
10
820
6.3×5.8
12.5×13.5 Silver
32
HVK
Low ESR, 125℃, Hybrid Polymer Chip
−55
+125
4000
6000
6.3
100
10
820
5×5.8
12.5×13.5 Silver
32
HTK
Low ESR, 125℃, Hybrid Polymer Chip, Vibration resistance
−55
+125
4000
6000
6.3
100
10
820
6.3×5.8
12.5×13.5 Silver
32
☆
☆
HVX
Low ESR, 135℃, Hybrid Polymer Chip
−55
+135
2000
4000
16
63
10
560
6.3×5.8
10×12.5 Silver
32
☆
HTX
Low ESR, 135℃, Hybrid Polymer Chip, Vibration resistance
−55
+135
2000
4000
16
63
10
560
6.3×5.8
10×12.5 Silver
32
☆
HVQ
Low ESR, 150℃, Hybrid Polymer Chip
−55
+150
1000
16
63
33
470
8×10
10×10
Silver
32
★
HTQ
Low ESR, 150℃, Hybrid Polymer Chip, Vibration resistance
−55
+150
1000
16
63
33
470
8×10
10×10
Silver
32
★
Low ESR Hybrid Polymer, lead terminal type
−55
+105
10000
25
100
15
560
10×10
10×12.5 Silver
04
HRK
Low ESR, 125℃, Hybrid Polymer, lead terminal type
−55
+125
25
100
15
560
10×10
10×12.5 Silver
04
PVX
Ultra Low ESR Conductive Polymer Chip
−55
+105
2000
2.5
10
100
1200
5×5.7
6.3×5.7
Silver
32
PVM
Super Low ESR Conductive Polymer Chip
−55
+105
2000
2.5
16
33
1200
5×5.7
6.3×5.7
Silver
32
PVK
Super Low ESR, High Temp. Conductive Polymer Chip
−55
+125
1000
2.5
16
33
1000
6.3×5.7
Silver
32
Size range
φD x L (mm)
HR
Polymer
Application
Outside
color
Series
Category
● Aluminum (Conductive Polymer, Hybrid) Electrolytic Capacitors
4000
6000
For Vibration Resistance
Low Impedance, Low ESR, High Reliability
Life time
Range
(hours)
Min.
Max.
Rated Voltage Rated Capacitance
Range
Range
(V.DC)
(µF)
32
12.5×13.5 Silver
32
Silver
32
Silver
32
4×5.3
10×10.5 Silver
32
100
4×5.7
6.3×5.7
Silver
32
Max.
Min.
Max.
4.5mm L
−40
+85
2000
6.3
50
10
100
RV5
High CV
−40
+85
2000
4
100
1
2200
4×5.3
RVB
Non Polarized
−40
+85
2000
6.3
50
1
47
4×5.3
RVE
105℃ , 4.5mmL
−40
+105
1000
6.3
50
10
100
RVS
105℃ , 5.5mm L
−55
+105
1000
6.3
50
1
1500
RVL
105℃ , 5.5mm L
−55
+105
2000
6.3
50
1
2000
5000
Min.
Silver
Min.
RV4
Max.
Min.
Max.
6.3×4.5
6.3×5.3
6.3×4.5
RVJ
105℃, Higher Capacitance
−55
+105
6.3
100
10
1000
8×6.5
12.5×13.5 Silver
32
RVR
105℃, Long Life, High CV
−40
+105
2000
4
50
1
1500
4×5.3
10×10.5 Silver
32
RVI
105℃ , Non Polarized, 2000h
−40
+105
2000
6.3
50
1
47
4×5.8
6.3×5.8
Silver
32
RVC
105℃, 3000h/5000h
−40
+105
3000
5000
6.3
50
1
1000
4×5.8
10×10
Silver
32
RZH
105℃, 5000h/7000h
−55
+105
5000
7000
6.3
35
22
1000
6.3×5.8
10×10
Silver
32
RVZ
105℃ , Low ESR
−55
+105
1000
5000
6.3
35
4.7
2700
4×5.3
12.5×13.5 Silver
32
RVD
105℃ , Low ESR, Long life
−55
+105
2000
5000
6.3
100
4.7
2200
4×5.8
12.5×13.5 Silver
32
RVV
105℃ , Low ESR, High CV
−55
+105
2000
6.3
50
33
1500
6.3×5.8
10×10
Silver
32
RZD
105℃ , Low ESR, High CV
−55
+105
2000
6.3
50
22
2200
6.3×5.8
10×10
Silver
32
RZK
105℃ , Low ESR, High CV
−55
+105
2000
25
35
470
1000
8×10
10×10
Silver
32
RVT
125℃ , Low ESR
−40
+125
1000
5000
10
100
4.7
1000
4×5.8
12.5×13.5 Silver
32
RZJ
125℃ , Low ESR, Long Life
−40
+125
2000
3000
10
50
47
470
6.3×7.7
10×10
Silver
32
RZF
125℃ , Low ESR, Long Life, High CV
−40
+125
2000
4000
10
50
22
680
6.3×5.8
10×10
Silver
32
RZE
125℃ , Low ESR, High CV
−40
+125
2000
35
35
47
100
Silver
32
RVX
135℃, Higher Reliability
−40
+135
1000
25
35
22
330
8×10
Silver
32
RTZ
105℃, Low ESR, High CV, 30G Vibration resistance
−55
+105
1000
5000
6.3
35
33
8200
6.3×5.8
18×21.5 Silver
32
RTD
105℃, Low ESR, High CV, 30G Vibration resistance
−55
+105
2000
4000
6.3
100
10
8200
6.3×5.8
18×21.5 Silver
32
RTT
125℃, Low ESR, High CV, 30G Vibration resistance
−40
+125
1000
5000
10
100
10
4700
6.3×5.8
18×21.5 Silver
32
RTQ
150℃, Low ESR, High CV, 30G Vibration resistance
−40
+150
10
35
33
470
8×10
Silver
32
1000
6.3×7.7
10×10
10×10
Note
Category
Temp. Range
(℃)
JIS
Configurati
Series
Application
Outside
color
High Reliability
Standard
Category
● Chip Type Aluminum Electrolytic Capacitors
★
☆
* Be sure to "Cautions for using Aluminum Electrolytic capacitors", before using these products.
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
ALUMINUM ELECTROLYTIC CAPACITORS
■ Type List for Aluminum Electrolytic Capacitors
★ : New series
☆ : Upgrade
Max.
Min.
Max.
Min.
Max.
−40
+85
1000
4
50
1
470
4×5
8×5
Blue
04
R3S
5mmL, 105℃
−55
+105
1000
6.3
50
1
100
4×5
6.3×5
Black
04
Series
Min.
5mmL, Standard
Min.
Max.
Min.
Max.
Size range
φD x L (mm)
RB3
5mmL, Bipolar
−40
+85
1000
6.3
50
0.33
47
4×5
6.3×5
Blue
04
RC2
7mmL, Standard
−40
+85
1000
4
100
1
330
4×7
8×7
Blue
04
R2S
7mmL, 105℃
−55
+105
1000
6.3
50
1
100
4×7
6.3×7
Black
04
RB2
7mmL, Bipolar
−40
+85
1000
6.3
50
0.33
47
4×7
6.3×7
Blue
04
RE3
Miniaturized Standard
−40
+85
2000
6.3
450
0.47
22000
5×11
18×40
Blue
04
R2B
Bipolarity Standard
−40
+85
2000
6.3
100
1
4700
5×11
18×35.5
Blue
04
RJP
105℃ , Bipolar
−40
+105
1000 2000
6.3
50
1
6800
5×11
18×35.5 Black
04
+105
1000
1000 2000
+105
1000 2000
+105
1000 2000
6.3
160
6.3
160
6.3
160
100
450
100
450
100
400
1
1
1
1
1
1
22000
470
22000
330
15000
220
5×11
6.3×11
5×11
6.3×11
5×11
6.3×11
18×40
Black
18×40
18×40
Black
18×35.5
18×35.5
Black
18×40
1000
6.3
50
1
2200
5×11
18×35.5
Blue
04
−55
−40
−55
−40
−55
−40
105℃ , Miniaturized, High CV
RJ4
105℃ , Miniaturized
RJ3
105℃ , Low Impedance
Low-leakage Current
−40
+85
04
04
04
RLB
RJB
105℃ , Low Impedance, Miniaturized
−55
+105
2000 5000
6.3
100
3.3
10000
5×11.5
16×31.5 Black
04
RJH
105℃ , Extra Low Impedance
−55
+105
2000 5000
6.3
100
1
15000
5×11.5
18×40
Black
04
RJF
105℃ , Extra Low Impedance, Miniaturized
−40
+105
1000 10000
6.3
100
5.6
6800
4×7
18×40
Black
04
RJM
105℃ , Long life, Low Impedance
−40
+105
6000 10000
6.3
50
27
8200
5×11.5
16×25
Black
04
RJD
105℃, Low ESR, High Ripple, Miniaturized
−55
+105
2000 8000
6.3
100
10
18000
5×11.5
20×40
Black
04
RKD
125℃ , Low ESR, Miniaturized
−40
+125
2000 5000
10
100
100
8200
8×12
20×40
Black
04
RKB
135℃ , Low ESR, Miniaturized
−40
+135
2000 3000
10
100
220
6800
10×12.5
18×40
Silver
04
RKC
135℃ , Low ESR, Miniaturized
−40
+135
2000 3000
25
100
160
18×40
Silver
04
RQA
150℃ , Miniaturized
−40
+150
1000
10
63
220
4700
10×14.5
18×42.5 Silver
04
RQB
150℃ , Miniaturized
−40
+150
2000
35
80
320
4700
16×26.5
18×42.5 Silver
04
RJE
105℃ , Low ESR, High Ripple, For Airbag
−55
+105
5000
25
35
830
11000 12.5×15
18×40
Black
04
RJK
105℃ , High CV, Low ESR, High Ripple, For Airbag
−55
+105
5000
25
35
2500
17000
16×20
20×40
Black
04
RPK
125℃ , Low ESR, 30G Vibration resistance
−40
+125
5000
10
100
220
8200 12.5×15
20×40
Black
04
RKE
125℃ , Low ESR, 40G Vibration resistance
−40
+125
5000
25
50
1200
8200
22×40
Silver
04
High Ripple, long
Life
For Vibration Resistance For Air bag
Special
RJ5
12000 12.5×20
16×31.5
RKF
135℃ , Low ESR, 40G Vibration resistance
−40
+135
2000 3000
25
100
180
22×40
Silver
04
RKG
150℃ , Low ESR, 40G Vibration resistance
−40
+150
1000 2000
25
80
800
4700
18×42
22×42
Silver
04
RHS
105℃ , Long Life, High Ripple, For OBC
−40
+105
4000 5000
160
450
1
1000
10×12.5
22×50
Black
04
RHC
105℃ , Long Life, High Ripple, For OBC
−40
+105
5000 10000
160
450
2.2
1000
10×12.5
22×50
Black
04
RHD
105℃ , Long Life, High Ripple, For OBC
−40
+105
8000 12000
160
450
3.3
1000
10×12.5
22×50
Black
04
10000 12.5×25
Note
Rated Voltage Rated Capacitance
Range
Range
(V.DC)
(µF)
JIS
Configurati
Life time
Range
(hours)
Outside
color
Category
Temp. Range
(℃)
RC3
Application
Low Impedance, Low ESR, High Reliability
Standard
Low profile
Category
● Miniature Aluminum Electrolytic Capacitors
★
* Be sure to "Cautions for using Aluminum Electrolytic capacitors", before using these products.
● Some of the series listed in the below table have been removed from the catalogue.
Please select from the new series for a designing your(new) application.
Category
Series
Polymer
PRM
RV2
RV3
RV
Chip
Application
Ultra Low ESR Conductive Polymer Chip
85℃, 5.5mm L, Standard
85℃, High CV
85℃, Large Capacitance
Category
Temp. Range
(℃)
Min.
Max.
−55
−40
−40
−40
+105
+85
+85
+85
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
Life time
Range
(hours)
Min.
Max.
2000
2000
2000
2000
Rated Voltage Rated Capacitance
Range
Range
(V.DC)
(µF)
Min.
Max.
2.5
4
6.3
6.3
6.3
50
50
100
Min.
120
0.1
4.7
10
Max.
1200
220
330
2200
Size range
φD x L (mm)
Min.
5×5.7
3×5.3
4×5.3
8×6.5
Max.
10×7.7
6.3×5.3
6.3×7.7
12.5×13.5
Substitute
series to
recomend
—
RV5
RV5
RV5
CAT.No.2021/2022E
ALUMINUM ELECTROLYTIC CAPACITORS
■ Type List for Aluminum Electrolytic Capacitors
★ : New series
☆ : Upgrade
Screw terminal
Special
Snap-in
Min.
−40
−25
−40
−25
Rated Voltage Rated Capacitance
Range
Range
(V.DC)
(µF)
Min.
10
—
16
160
Max.
400
450
100
450
2000
160
500
22
3900
+105
3000
16
160
100
500
390
39
82000
3900
−25
+105
5000
160
500
39
−25
+105
5000
200
500
390
105℃ , Higher Capacitance, Ultra Long Life
−25
+105
5000
200
500
High ripple current
−25
+85
2000
250
LM
High ripple current, Higher Capacitance
−25
+85
2000
LYX
105℃ . Ultra Long Life
−40
+105
LYL
Ultra Long Life
−40
LY6
High Ripple, Miniaturized
−25
Standard
−40
−25
LA5
Miniaturized
LAH
105℃ , Standard
LAT
105℃ , Miniaturized
−25
LAZ
High-Reliability, High Ripple, Long Life
−40
−25
LAX
105℃, Ultra Long Life
LJ6
105℃ , Higher Capacitance, Ultra Long Life
LJ2
LPM
LY5
Max.
Life time
Range
(hours)
Min.
Max.
22×20
35×50
Black 692
22×20
35×50
Black 692
22×20
35×60
Black 692
22×20
35×50
35×60
Black 692
3900
22×20
35×60
Black 692
3900
35×40
40×80
Black
—
560
3900
40×45
40×80
Black
—
400
45
220
35×40
35×50
Black 692
250
400
90
440
35×80
40×100
Black
5000
350
450
1000
15000
51×75
90×236
Black 331
+85
20000
350
450
1000
15000
51×75
90×236
Black 331
+85
5000
400
600
1000
22000
51×115
101×237
Black 331
2000
10
350
250
630
1500 820000
470
18000
36×53
36×83
90×171
101×220
Black 331
+85
2000
+105
2000
+105
+85
Min.
Max.
56 150000
47
820
390
82000
56
2200
Size range
φD x L (mm)
Note
Category
Temp. Range
(℃)
JIS
Configurati
Application
Outside
color
Series
Category
● Large Capacitance Aluminum Electrolytic Capacitors
—
Max.
Min.
Max.
Chip Type (PURECAP)
−40
+85
2000
6.3
50
0.33
1000
4×5.3
10×10
Silver
32
RVF
Chip Type (SILMIC)
−40
+85
2000
10
50
1
100
4×5.3
8×10
Silver
32
RVM
Chip Type 105℃ , 2000h
−55
+105
2000
6.3
50
1
470
4×5.8
10×10.5 Silver
32
RVG
Chip Type
−40
+85
2000
6.3
35
3.3
470
4×5.3
10×10
Silver
32
RFS
High Grade (SILMIC Ⅱ)
−40
+85
1000
6.3
100
3.3
3300
5×11
18×40
Brown
04
ROS
High Grade (SILMIC)
−40
+85
1000
16
100
10
2200
6.3×11
18×40
Brown
04
ROB
Miniaturized Standard (TONEREX)
−40
+85
1000
6.3
100
1
10000
5×11
18×40
Black
04
RFO
Standard (PURECAP)
−40
+85
1000
6.3
100
1
15000
5×11
18×35.5 Black
04
RA3
Miniaturized Standard
−40
+85
2000
6.3
100
1
22000
5×11
18×35.5 Brown
04
RW5
105℃ , Miniaturized
−55
+105
1000
16
25
100
15000
5×11.5
18×40
Black
04
RBD
Miniaturized Bipolar
−40
+85
2000
6.3
100
1
4700
5×11
18×35.5 Black
04
LAO
For Audio, Higher Capacitance
−40
+85
1000
16
100
680
10000
22×20
Series
Min.
RVO
Application
Life time
Range
(hours)
Min.
Max.
Size range
φD x L (mm)
Min.
Max.
35×50
Note
Rated Voltage Rated Capacitance
Range
Range
(V.DC)
(µF)
JIS
Configurati
Category
Temp. Range
(℃)
Outside
color
For Audio
Category
● Aluminum Electrolytic Capacitors for Audio
Black 692
* Be sure to "Cautions for using Aluminum Electrolytic capacitors", before using these products.
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
ALUMINUM ELECTROLYTIC CAPACITORS
®
Systematized Classification of Aluminum Electrolytic Capacitors
● Conductive Polymer Hybrid Aluminum Electrolytic Capacitors
CONDUCTIVE POLYMER HYBRID
HV
105°C 10000h
HVK
High temp. 125°C
D5-12.5
6000h
HVX
High temp. 135°C
D5-12.5
For vibration
resistance
HT
105°C 10000h
HTK
D6.3-12.5
HVQ
High temp. 150°C
D6.3-10
For vibration
resistance
High temp. 125°C
4000h
6000h
For vibration
resistance
HTX
High temp. 135°C
D6.3-12.5
lead terminal
1000h
HR
D8-10
4000h
For vibration
resistance
HTQ
High temp. 150°C
D6.3-10
HRK
105°C 10000h High temp. 125°C
D10
6000h
D10
1000h
D8-10
● Aluminum Electrolytic Capacitors with Conductive Polymer Solid Electrolyte
CONDUCTIVE POLYMER SOLID ELECTROLYTE
PVM
PVK
125°C
105°C
1000h
2000h
PVX
Low ESR 105°C
D5-10
D6.3-10
2000h
PVG
Low ESR 105°C
D5-10
2000h
D5-10
● Chip Type Aluminum Electrolytic Capacitors
CHIP TYPE (85℃)
RV2
85°C
2000h
High CV
D3-6.3
2000h
High CV
D4-6.3
RV5
85°C
RV4
High CV
RVB
85°C
2000h
D6.3
2000h
D4-12.5
Bipolar
Low profile
85°C
RV3
85°C
RV
85°C
2000h
D4-6.3
2000h
D8-12.5
CHIP TYPE (105℃)
RVS
105°C
1000h
Long life
D4-10
RVL
105°C
2000h
D4-6.3
Large
size
RVJ
105°C
5000h
High CV
D8-12.5
2000h
Long life
D4-10
Low
profile
RVC
105°C
5000h
D4-10
RZH
105°C
7000h
D6.3-10
RVI
105°C
1000h
2000h
D4-6.3
D6.3
CHIP TYPE (105℃, LOW ESR, HIGH RELIABILITY)
RVZ
105°C
Long life
Bipolar
RVE
105°C
RVR
105°C
RVD
5000h Low ESR 105°C
Long life
D4-12.5
5000h
RVV
High CV 105°C
D4-12.5
RZD
2000h Low ESR 105°C
High CV
D6.3-10
2000h
High CV
D6.3-10
CHIP TYPE (FOR VIBRATION RESISTANCE)
RZK
105°C
RTQ
2000h
150°C
D8-10
1000h
D8-10
High temp.
RTT
CHIP TYPE (HIGH TEMP., LOW ESR, HIGH RELIABILITY)
RVX
135°C
D8-10
RVT
1000h High temp. 125°C
D4-12.5
RZJ
5000h Low ESR 125°C
Long life
D6.3-10
3000h
High CV
Long life
RZF
125°C
D6.3-10
125°C
RZE
4000h Low ESR 125°C
D6.3
High temp.
2000h
RTZ
105°C
D6.3-18
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
5000h
D6.3-18
RTD
5000h Low ESR 105°C
Long life
5000h
D6.3-18
CAT.No.2021/2022E
ALUMINUM ELECTROLYTIC CAPACITORS
®
Systematized Classification of Aluminum Electrolytic Capacitors
● Miniature Aluminum Electrolytic Capacitors
LOW PROFILE
RB3
85°C
1000h
Bipolar
D4-6.3
RC3
85°C
D4-8
Low profile
RB2
85°C
High
temp.
1000h
1000h
Low profile
Bipolar
D4-6.3
1000h
D4-6.3
Low profile
RC2
85°C
R3S
105°C
High
temp.
1000h
D4-8
R2S
105°C
1000h
D4-6.3
STANDARD
RJ3
105°C
2000h
High CV
D5-18
RJ4
105°C
2000h
High CV
D5-18
RJ5
105°C
2000h
D5-18
High temp.
RE3
85°C
Bipolar
2000h
D5-18
Low-leakage current
Bipolar
R2B
85°C
RLB
RJP
2000h
105°C
D5-18
85°C
2000h
1000h
D5-18
D5-18
LOW IMPEDANCE, LOW ESR, HIGH RELIABILITY
RJH
105°C
5000h
D5-18
Low Z
High CV
RJB
RJF
Long life
D4-18
RJE
RJD
105°C
5000h Low ESR 105°C
D5-16
D5-20
High CV
105°C
8000h
5000h
D12.5-18
LOW IMPEDANCE, LONG LIFE
105°C 10000h
FOR AIR BAG
RHS
RJM
105°C
D5-16
D10-22
5000h
RHC
Long life 105°C 10000h
RKC
RQB
3000h
150°C
D12.5-18
D8-20
5000h
High
temp.
RKB
135°C
D10-18
3000h
High CV
High ripple
High
temp.
RQA
150°C
1000h
D10-18
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
RHD
105°C 12000h
D10-22
FOR VIBRATION RESISTANCE
RKE
125°C
5000h
D16-22
D16-18
High CV
High ripple
RKD
2000h
Long life
D10-22
LOW IMPEDANCE, LOW ESR, HIGH TEMPERATURE
125°C
5000h
D16-20
HIGH RIPPLE, LONG LIFE
105°C 10000h
135°C
RJK
High CV 105°C
Low ESR
High
temp.
RKF
135°C
3000h
D12.5-22
High
temp.
RKG
150°C
2000h
D18-22
40G
RPK
125°C
5000h
D12.5-20
CAT.No.2021/2022E
ALUMINUM ELECTROLYTIC CAPACITORS
®
Systematized Classification of Aluminum Electrolytic Capacitors
● Large Capacitance Aluminum Electrolytic Capacitors
SNAP-IN TYPE
LAH
105°C
2000h
High CV
D22-35
LAT
105°C
2000h
Long life
D22-35
LAZ
LAX
3000h Long life 105°C
105°C
D22-35
5000h
D22-35
Large
cap.
LJ6
105°C
LJ2
5000h
105°C
D35-40
5000h
D40
High Temp.
LA5
85°C
2000h
D22-35
SCREW TERMINAL TYPE
HIGH RIPPLE CURRENT
LYX
105°C
LPM
5000h
85°C
D51-90
D35
2000h
Large
cap.
LM
85°C
2000h
D35-40
High temp.
LY5
85°C
2000h
Long life
D36-101
LY6
85°C
5000h
Long life
D51-101
LYL
85°C
20000h
D51-90
● Aluminum Electrolytic Capacitors For Audio
CHIP TYPE
RVM
105°C
2000h
D4-10
High temp.
RVO
PURECAP
85°C
2000h
High
grade
D4-10
RVG
85°C
2000h
High
grade
D4-10
RVF
SILMIC
85°C
2000h
D4-8
MINIATURE TYPE
Bipolar
RFO
RBD
PURECAP
85°C
1000h
85°C
D5-18
2000h
D5-18
High grade
RA3
85°C
2000h
High
grade
D5-18
ROB
TONEREX
85°C
D5-18
1000h
High
grade
ROS
SILMIC
85°C
1000h
High
grade
D6.3-18
RFS
SILMIC Ⅱ
85°C
1000h
D5-18
High temp.
RW5
105°C
1000h
D5-18
SNAP-IN TYPE
LAO
85°C
1000h
D22-35
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
ALUMINUM (CONDUCTIVE
ELECTROLYTICPOLYMER,
CAPACITORS
HYBRID) ELECTROLYTIC CAPACITORS
®
Product Symbol System for Aluminum Electrolytic Capacitors
V
①Series code
②Rated voltage
symbol
M
③Rated
capacitance
symbol
④
⑤Casing
symbol
⑥Optional
symbol
⑦Taping,
Lead-forming
symbol
①Series code
Please refer to the page of each series.
②Rated voltage symbol
Write down the rated voltage itself ; however, write 2R5 for 2.5V, 6 for 6.3V.
③Rated capacitance symbol
The symbol denoting nominal capacitance shall consist of three numerals.
The first and second numerals shall represent the significant figures of
nominal capacitance in the unit of microfarad (µF).
And the third numeral shall represent the number of zeros following the significant figures.
A decimal point is expressed with "R."
Example
Rated capacitance (µF)
Symbol
0.1
R10
1
010
2.2
2R2
33
330
100
101
2200
222
33000
333
470000
474
④Capacitance tolerance symbol
Example
Capacitance tolerance
Symbol
±10%
K
±20%
M
−10 to +30%
Q
−10 to +50%
T
⑤Casing symbol
Please refer to the page of each series.
⑥Optional symbol
Plating
Example
Symbol
Contents
#
Sn 100% plating +PET sleeve (lead terminal type)
U
Sn-Bi plating (chip type)
T
Sn 100% plating (chip type)
For Automotive
Example
Symbol
Contents
Q
Based on AEC-Q200
N
Based on AEC-Q200
⑦Taping, Lead-forming symbol
Write down one of the forming symbols given on page for taping and lead-forming capacitors.
When taping or lead-forming is not necessary, leave the boxes blank.
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
LAND PATTERN CHIP TYPE ALUMINUM (CONDUCTIVE POLYMER, HYBRID)
ELECTROLYTIC
CAPACITORS
CHIP TYPE ALUMINUM
ELECTROLYTIC CAPACITORS
AND SIZE
®
Recommended land pattern and size
(Vertical chip type)
Standard type
(Unit : mm)
X
Land Size
Y
2.6
3.0
3.6
3.6
*4.0
*3.5
*4.0
6.0
Case Size
φD×L
X
4×4.5, 5.3, 5.7, 5.8
1.6
5×4.5, 5.3, 5.7, 5.8
1.6
6.3×4.5, 5.3, 5.7, 5.8
1.6
6.3×7.7
1.6
8×6.5, 8.7
1.6
8×10, 10.5
2.5
10×8.7.10,10.5,12.5
2.5
12.5×13.5
3.2
*For Vibration resistance use
Y=4.5 W=1.0
φ8×6.5
φ8×10, φ8×10.5 Y=4.0 W=2.5
φ10×10, φ10×10.5 Y=4.5 W=3.0
Y=4.5 W=3.0
φ10×12.5
Y
W
Y
W
1.0
1.4
1.9
1.9
*2.1
*3.0
*4.0
4.0
Thickness of
Solder paste
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
For vibration resistance type
RTZ,RTD,RTT,RTQ,RTV,RMH,RMD,RMJ,RMF,RME,HT,HTK,HTX,HTQ series
X
(Unit : mm)
Y
W
Y
Case Size
φD
Land Size
Y
W
Thickness of
Solder paste
6.3
3.0
4.0
1.6
0.20
8
5.0
4.0
2.5
0.20
10
5.0
4.8
3.6
0.20
12.5
7.0
6.6
3.2
0.20
16
10.5
7.8
5.0
0.20
18
10.5
8.8
5.0
0.20
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
X
CAT.No.2021/2022E
SOLDERING
CONDITIONS
®
ALUMINUM (CONDUCTIVE POLYMER, HYBRID)
ELECTROLYTIC
CAPACITORS
ALUMINUM
ELECTROLYTIC CAPACITORS
SOLDERING
CONDITIONS
■ Recommended soldering conditions (Lead free)
●
Aluminum (Conductive Polymer, Hybrid) electrolytic capacitors (Lead terminal type, Snap-in type)
(1) Soldering iron conditions
Iron tip temperature shall be 400°
C±5°
C within the duration of 3 0 seconds.
+1
(2) Flow soldering conditions
The recommendation soldering conditions of the product in which flow soldering is possible are as graph.
Recommended flow soldering profile
(PCB undersurface temperature)
300
260+/−5℃
10 s Max.
Temperature (℃)
250
200
150
100
100−130℃
30 to 60s
50
0
0
50
100
150
200
time (s)
Caution for Using aluminum Electrolytic Capacitors
(1) Do not dip the capacitor into melted solder.
(2) Do not flux other part than the terminals.
(3) If there is a direct contact between the sleeve of the capacitor and the printed circuit pattern or
a metal part of another component such as a lead wire, it may cause shrinkage of crack.
(4) If the application is for extended use, understand and manage the soldering characteristics to avoid
abnormal current caused by a contact failure between the capacitor and the PCB.
(5) Please refer to cautions for using on page and product specifications about other notes.
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
SOLDERING CHIP TYPE ALUMINUM (CONDUCTIVE POLYMER, HYBRID) SOLDERING
CAPACITORS
ALUMINUM
ELECTROLYTIC CAPACITORS CONDITIONS
CONDITIONS ELECTROLYTIC
®
■ Recommended soldering conditions (Lead free)
●
Chip type aluminum (Conductive Polymer, Hybrid) electrolytic capacitors
(1) Soldering iron conditions
Iron tip temperature shall be 400°
C±5°
C within the duration of 3 0 seconds.
+1
(2) Reflow soldering conditions
Profile
Capacitor temp. (°
C)
Peak temp.
230
217
200
T230
180
160
C within
1. Preheating shall be under 180°
120 seconds.
2. Peak temperature shall be within the
following table.
3. For conditions exceeding the tolerances, consult
with us.
T217
120
T200
Time (s)
T200 : Duration while capacitor head temperature exceeds 200°
C (s)
T217 : Duration while capacitor head temperature exceeds 217°
C (s)
T230 : Duration while capacitor head temperature exceeds 230°
C (s)
The measurement temperature point is the case top.
●
Chip type aluminum Conductive Polymer, Hybrid electrolytic capacitors
Series
HV, HVK, HVX, HVQ,
HT, HTK, HTX, HTQ,
PVX, PVM, PVK
●
Size
Peak temp.
(5sec or less)
T230
T217
T200
Reflow cycle
φ5 to φ6.3
250℃ Max.
40 sec. max.
50 sec. max.
60 sec. max.
2 times or less
φ8 to φ10
240℃ Max.
40 sec. max.
50 sec. max.
60 sec. max.
2 times or less
φ12.5
240℃ Max.
20 sec. max.
30 sec. max.
50 sec. max.
2 times or less
Chip type aluminum electrolytic capacitors
Series
RV2, RV3, RV5, RV,
RVB, RVS, RVL, RVR,
RVC, RZH, RVZ, RVD,
RVV, RZD, RZK, RVT,
RZJ, RZF, RZE, RVX,
RVE, RVI, RVO, RVF,
RVM, RVG
RV4
RVJ
RZA, RZB, RZC
RTZ, RTD, RTT, RTQ,
RTV, RMH, RMD, RMK,
RMJ, RMF, RME
Size
Peak temp.
(5sec or less)
T230
T217
T200
Reflow cycle
φ4 to φ6.3
250℃ Max.
40 sec. max.
50 sec. max.
60 sec. max.
2 times or less
φ8 to φ10
240℃ Max.
40 sec. max.
50 sec. max.
60 sec. max.
2 times or less
φ12.5
240℃ Max.
20 sec. max.
30 sec. max.
50 sec. max.
2 times or less
φ4 to φ5
250℃ Max.
40 sec. max.
50 sec. max.
60 sec. max.
2 times or less
φ6.3
240℃ Max.
40 sec. max.
50 sec. max.
60 sec. max.
2 times or less
φ8 to φ10
240℃ Max.
40 sec. max.
50 sec. max.
60 sec. max.
2 times or less
φ12.5
230℃ Max.
—
20 sec. max.
30 sec. max.
2 times or less
φ4 to φ6.3
260℃ Max.
40 sec. max.
90 sec. max.
—
2 times or less
φ8 to φ10
250℃ Max.
40 sec. max.
90 sec. max.
—
2 times or less
φ6.3
250℃ Max.
40 sec. max.
60 sec. max.
80 sec. max.
2 times or less
φ8 to φ10
250℃ Max.
30 sec. max.
60 sec. max.
80 sec. max.
2 times or less
φ12.5 to φ18
240℃ Max.
20 sec. max.
30 sec. max.
50 sec. max.
2 times or less
*Please ensure that the capacitor became cold enough to the room temperature (5 to 35℃) before the second reflow.
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
TAPING
®
CHIP TYPE ALUMINUM (CONDUCTIVE POLYMER, HYBRID)
ELECTROLYTIC
CAPACITORS
CHIP TYPE ALUMINUM
ELECTROLYTIC
TAPING
Taping
Carrier tape dimension (taping polarity R)
φ4 to φ10
φ12.5 to 18
Pull-out directi
A±0.2
4.0±0.1 2.0±0.1
φ1.5 +0.1
0
1.75±0.1
B±0.2
F±0.1
P±0.1
t2±0.2
t1±0.1
P±0.1
t2±0.2
A±0.2
(Unit : mm)
W±0.3
1.75±0.15
F±0.1
φ1.5 +0.1
0
W±0.3
4.0±0.1 2.0±0.1
B±0.2
t1±0.1
S±0.1
(Unit : mm)
Pull-out directi
0.2±0.05
φ1.5/2
φ1.5/2
(Unit : mm)
Taping polarity
Outside size
φD×L
W
A
B
P
t2
F
t1
S
4×4.5
12
4.7
4.7
8.0
4.8
5.5
0.4
̶
4×5.3
12
4.7
4.7
8.0
5.8
5.5
0.4
̶
4×5.7, 5.8
12
4.7
4.7
8.0
6.2
5.5
0.4
̶
5×4.5
12
5.7
5.7
12
4.8
5.5
0.4
̶
5×5.3
12
5.7
5.7
12
5.8
5.5
0.4
̶
5×5.7, 5.8
12
5.7
5.7
12
6.2
5.5
0.4
̶
6.3×4.5
16
7.0
7.0
12
4.8
7.5
0.4
̶
6.3×5.3
16
7.0
7.0
12
5.8
7.5
0.4
̶
6.3×5.7, 5.8
16
7.0
7.0
12
6.2
7.5
0.4
̶
6.3×7.7
16
7.0
7.0
12
8.3
7.5
0.4
̶
8×6.5
16
8.7
8.7
12
6.8
7.5
0.4
̶
8×8.7
24
8.7
8.7
16
9.5
11.5
0.4
̶
8×10
24
8.7
8.7
16
11
11.5
0.4
̶
8×10.5
24
8.7
8.7
16
12
11.5
0.4
̶
10×8.7
24
10.7
10.7
16
11.5
0.4
̶
10×10
24
10.7
10.7
16
11
11.5
0.4
̶
10×10.5
24
10.7
10.7
16
11.5
11.5
0.4
̶
10×12.5
24
10.7
10.7
16
13.0
11.5
0.4
̶
* 12.5×13.5
32
13.4
13.4
24
14.5
14.2
0.5
28.4
(The all series except bypolar type)
9.5
*
16×16.5
44
17
17
28
17.5
20.2
0.5
40.4
*
16×21.5
44
17
17
28
22.5
20.2
0.5
40.4
*
18×16.5
44
19
19
32
17.5
20.2
0.5
40.4
*
18×21.5
44
19
19
32
22.5
20.2
0.5
40.4
Reel dimension
(Unit : mm)
Packing quantity (Reel)
(Unit : mm)
2.5
Outside size Reel dimension
φD×L
t
W
23
380
W
t
(*330)
Outside size
φD×L
Quatity (PCS.)
4
14
3
4
2000
5
14
3
5, 6.3
1000
6.3
18
3
8×6.5
1000
8×6.5
18
3
8×8.7 to 10.5
500
8, 10
26
3
10×8.7 to 10.5
500
10×12.5
400
*
12.5×13.5
200
*
16×16.5
125
*
16×21.5
75
*
18×16.5
125
*
18×21.5
75
φ80
13±0.5
*
12.5
34
3
*
16
46
3
*
18
46
3
Reel material
Card board : symbol R
Polystyrene : symbol R2 (φ10 or less)
R5 (φ12.5 or more)
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
LEAD FORMING
LEAD
FORMING
ELECTRIC MINIATURE
DOUBLE LAYER
CAPACITORS (LEAD TERMINAL
ALUMINUM
TYPE) MINIATURE
ALUMINUM
ELECTROLYTIC ELECTROLYTIC
CAPACITORSCAPACITORS
®
Lead Forming
In order to facilitate insertion into printed circuit board, lead wires are cut or formed.
Product Size Table
F4
F
F
F
S1
S1
S1
B
5
A
4 to 5
B
2.5
6.3
A
8
3.5
A
4 to 8
B
4 to 8
5.0
B
7.5
10 to 12.5
A
16 to 18
A
5.0
4 to 8
B
7.5
10 to 12.5
A
16 to 18
A
Processed style A
Processed style B
L
F±0.5
F1
2.0
L
4.5±0.5
Processed style A
Snap-in
Processed style B
2.0Max. (5mmL, 7mmL: 1.5 Max. ) 4.5±0.5
φD
F±0.5
4.5±0.5
L
L
Forming cut
(restrict series)
F58
10
F49
16 to 18
F51
7.5
+0.4
3.1−0.2
⊖
φD
⊕
10 to 12.5
F±0.5
5.0
F51
3.2±0.5
φD
F51
F49
10 to 12.5
F49
4.5±0.5
2.5Max. (5mmL, 7mmL : 2.0 Max. )
F±0.5
Forming cut
4
Outline drawing
⊕
⊖
L
L
16 to 18
3.3±0.5
F58
φD
⊕
⊖
F±0.5
F1
Style
φD
F12
φD
φD
F1
F
(Lead pitch) (Case diameter)
F±0.5
F10
Dimension
φD
Forming name
Unit: mm
Lead
forming
symbol
F±0.5
●
L
G9, G10
φD
ℓ0
ℓ1
8
5.5
1.0
(Lead pitch) (Case diameter)
3.5
8
3.6
1.0
G9, G10
10 to 12.5
5.5
1.0
G55, G56
12.5
7.5
2.5
10 to 12.5
3.6
1.0
0.95
4.9
G59, G60
G59, G60
For 90°
side mount of case
Dimension
F
G95, G96
5.0
12.5
G99, GA0
10
1.0
1.9
GAS, GAT
10 to 12.5
4.5
1.0
G9, G10
16 to 18
5.5
1.0
16 to 18
4.5
1.0
GAS, GAT
7.5
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
Outline drawing
L
ℓ1±0.5
ℓ0±0.5
Lead
forming
symbol
φD
Forming name
F±0.5
F±0.5
⊖ ⊕
⊕ ⊖
G9, G55, G59,
G95, G99, GAS
G10, G56, G60,
G96, GA0, GAT
CAT.No.2021/2022E
TAPING
TAPING
ELECTRIC DOUBLE LAYER CAPACITORS (LEAD TERMINAL TYPE)
MINIATURE
ALUMINUM
ELECTROLYTIC
CAPACITORS
MINIATURE
ALUMINUM
ELECTROLYTIC
CAPACITORS
®
Taping
For automatic insertion (radial lead type)
Processed style A
P
P
P2
Δ h1
φD
ℓ
P0
P1
F
φd
W
W0
ℓ
W1
φd
H
F
W
W0
P1
Δ h1
φD
H0
H
P2
Processed style B
W1
●
φD0
P0
φD0
∗The shape of a lead wire sandwiched by the mounting strips may differ from the ones shown in the figures.
Product Size Table
Unit: mm
Item
Symbol
Tolerance
Lead forming symbol
̶
̶
Style
̶
̶
Lead-wire diameter
φd
±0.05
5L to 8L
φ4 to φ8(except φ8×7L)
T36
T58
B
0.4 or 0.45
F
+0.8
−0.2
Height of component from tape center
H
+0.75
−0.5
18.5
Lead-wire clinch height
H0
±0.5
̶
Pitch of component
P
±1.0
12.7
Feed hole pitch
P0
±0.3
12.7
Hole center to lead
P1
±0.5
Hole center to component
P2
±1.0
6.35
Tape width
W
±0.5
18.0
Hold down tape width
W0
Min.
6.0
Feed hole position
W1
±0.5
9.0
Max. lead protrusion
ℓ
Max.
1.0
Feed hole diameter
φD0
±0.2
4.0
Alignment of component to center
Δh
±1.0
0
Alignment of component to center
Δh1
±1.0
0
t
±0.2
0.7
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
T2
A or B
Lead to lead distance
Total tape thickness
φ4 to φ8
2.5
5.0
17.5
16.0 (φ4)
5.1
16.0
3.85
CAT.No.2021/2022E
TAPING
TAPING
ELECTRIC DOUBLE LAYER CAPACITORS (LEAD TERMINAL TYPE)
MINIATURE
ALUMINUM
ELECTROLYTIC CAPACITORS
MINIATURE
ALUMINUM
ELECTROLYTIC
CAPACITORS
®
Taping
●
For automatic insertion (radial lead type)
Product Size Table
Unit: mm
Item
11L to 25L
Symbol
Tolerance
Lead forming symbol
̶
̶
Style
̶
̶
Lead-wire diameter
φd
±0.05
Lead to lead distance
F
+0.8
−0.2
Height of component from tape center
H
+0.75
−0.5
Lead-wire clinch height
H0
±0.5
Pitch of component
P
±1.0
12.7
15.0
Feed hole pitch
P0
±0.3
12.7
15.0
Hole center to lead
P1
+0.5
(10 to φ18 ±0.7)
Hole center to component
P2
±1.0
Tape width
W
±0.5
18.0
Hold down tape width
W0
Min.
6.0
Feed hole position
W1
±0.5
9.0
Max. lead protrusion
ℓ
Max.
1.0
Feed hole diameter
φD0
±0.2
4.0
Alignment of component to center
∆h
±1.0
0
Alignment of component to center
∆h1
±1.0
0
t
±0.2
0.7
Total tape thickness
φ5, φ6.3
T36
T58
T2
A or B
φ8
φ10
φ12.5
T2
T2
T4
B
A
0.6
0.5 or 0.6
2.5
18.5
5.0
17.5
18.5
̶
20.0
16.0
5.1
̶
3.85
6.35
18.5
5.0
7.5
Part numbering system (example: Series RJB, 10V470µF, 5mm pitch taping)
RJB
Series code
—
10
Rated voltage
symbol
V
471
M
G3
Rated capacitance
symbol
Capacitance
tolerance symbol
Casing
symbol
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
# —
T2
Taping
symbol
CAT.No.2021/2022E
PACKING
PACKING
ALUMINUM (CONDUCTIVE POLYMER, HYBRID)
ALUMINUM
ELECTROLYTIC CAPACITORS
ELECTROLYTIC
CAPACITORS
®
Standard packing specification of aluminum (Conductive Polymer, Hybrid) electrolytic capacitors
(taping article)
Chip type
Classification
Conductive polymer hybrid aluminum electrolytic
capacitors, Aluminum electrolytic capacitors
Aluminium electrolytic capacitors with conductive
polymer solid electrolyte
Reel
Reel
Dampproof bag
Packing style
Inner box
Inner box
Classification
Lead terminal type
Packing size and quantity
Case size
Flat box
Packing style
φ4×5,φ4×7
φ5×5,φ5×7
φ5×11,φ5×11.5
φ6.3×5,φ6.3×7
φ6.3×11,φ6.3×11.5
φ8×5,φ8×7
φ8×11.5,φ8×12
φ8×15,φ8×20
φ10×12.5,φ10×16
φ10×20
φ12.5×15
φ12.5×20
φ12.5×25
W
210
270
265
300
300
270
265
255
215
210
290
290
290
Size (mm max.)
L
340
340
340
340
340
340
340
345
340
340
340
340
340
H
55
55
55
55
60
55
55
65
60
65
65
65
70
Quantity
(pcs)
2,000
2,000
2,000
2,000
2,000
1,000
1,000
1,000
500
500
500
500
500
L
Inner box
H
W
Please inquire for details.
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
PACKING
PACKING
ALUMINUM
ELECTROLYTIC
CAPACITORS
ALUMINUM
ELECTROLYTIC
CAPACITORS
Standard packing specification of aluminum electrolytic capacitors
(long lead, lead forming)
Classification
Long lead, Lead forming of φ10 or less
(Standard packing)
Lead forming of φ12.5 or more
(Standard packing)
Plastic bag
Small box
Inner box
Inner box
Packing style
Classification
φ10 to φ22
(Optional packing)
φ22 or more
(Standard packing)
Tray
Inner box
Inner box
Outer box
Packing style
Please inquire for details.
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
CONDUCTIVE POLYMER HYBRID ALUMINUM ELECTROLYTIC CAPACITORS
ALUMINUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE
Conductive Polymer Hybrid Aluminum Electrolytic Capacitors
Aluminum Electrolytic Capacitors With Conductive Polymer Solid Electrolyte
CAT.No.2021/2022E
TECHNICAL
CAUTION NOTE
ALUMINUMELECTROLYTIC
ELECTROLYTIC
CAPACITORS
CONDUCTIVE POLYMER HYBRID ALUMINUM
CAPACITORS
WITH
CONDUCTIVE
POLYMER
SOLID
ELECTROLYTE
ALUMINUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER
SOLID
ELECTROLYTE
®
Cautions for Using Conductive Polymer Hybrid Aluminum Electrolytic Capacitors,
Aluminum Electrolytic Capacitors With Conductive Polymer Solid Electrolyte
Please be sure to read this specification before using this product.
Before placing an order, please inquire about the Specification to check details.
Cautions for Usage
1. Conductive Polymer Hybrid Aluminum Electrolytic Capacitors, Solid Conductive Polymer
Aluminum Electrolytic Capacitors are polarized.
• Using a capacitor with reversed polarity causes
abnormal current flow, resulting in a short circuit.
• Cannot use for the circuit to which the polarity
reverses by ripple voltage.
2. Prohibited Circuits
• Since leakage current problem may arise, capacitors
cannot be used in the following circuits.
①Coupling circuits
②Circuits greatly affected by leakage current
3. Use capacitors within the rated voltage.
• The application of voltages exceeding the rated
voltage can significantly increase leakage current,
resulting in a short failure. Please do not apply a
voltage exceeding the rated voltage.
4. Be careful of excessive rush current.
• Using capacitors in the circuit where excessive
rush current passes may cause characteristic
deterioration or a short. When the rush current
exceeds 10 A, we recommend use of protection
circuits to ensure high reliability.
5. Use the allowable ripple voltage and the rated
ripple current below the specified values.
• When superimposing a ripple voltage on a DC bias
voltage, exercise care that the peak voltage value
does not exceed the rated voltage and does not
reverse the polarity.
• The rated ripple current shall be below the specified
value.
6. Changes in characteristics due to operating
temperature
• The characteristics of conductive polymer hybrid
aluminum electrolytic capacitors, solid conductive
polymer aluminum electrolytic capacitors vary by
temperature as follows. These variations are temporary and recover when the temperature goes back
(except for the case of characteristic deterioration
because of high temperatures over a long time).
Note that using capacitors over the upper category
temperature increases leakage current, resulting in
a short and destruction.
Be careful of the capacitor temperature considering
not only the ambient temperature where the
equipment is placed and the temperature inside the
equipment but also radiation heat from the heating
element inside the equipment, and self-heat
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
generation by ripple current.
①Capacitance expressed in the value at 20°C, 120
Hz increases with increased temperature and
decreases with decreasing temperature.
②Tangent of loss angle (tanδ) expressed in the
value at 20°C, 120 Hz is temperature-independent.
③Equivalent series resistance (ESR) expressed in
the value at 20°C, 100 kHz is temperature
independent.
④Leakage current increases with increased
temperature and decreases with decreasing
temperature.
7. Changes in characteristics due to frequency
• The characteristics of conductive polymer hybrid
aluminum electrolytic capacitors, solid conductive
polymer aluminum electrolytic capacitors vary by
operating frequency as follows.
①Capacitance expressed in the value at 20°C, 120
Hz decreases with increased frequency.
②Tangent of loss angle (tanδ) expressed in the
value at 20°C, 120 Hz increases with increased
frequency.
③Equivalent series resistance (ESR) expressed in
the value at 20°C, 100 kHz increases with
decreasing frequency.
8. Failure modes of solid conductive polymer
aluminum electrolytic capacitors
• The failure modes of solid conductive polymer
aluminum electrolytic capacitors are a wear-out
failure by deterioration of electrical performance and
a random failure by a short. The failure rate level is
0.5%/1,000h at the reliability level of 60% with the
specified voltage applied at 105°C.
• If a short occurs and continues with the application
of a voltage exceeding the rated voltage, increasing
the internal temperature, the internal pressure
increases by vaporization of the cathode material,
which may cause the aluminum case to come off.
9. Operating environments
• Do not use capacitors in an environment directly
exposed to water, saltwater spray, oil spill or
condensation.
• Do not use capacitors in an environment filled with
toxic gas such as hydrogen sulfide, sulfurous acid,
nitrous acid, chlorine, ammonia, etc.
• Do not use capacitors in a place exposed to ozone,
ultraviolet rays, or radiation.
10 . Fumigation Process
CAT.No.2021/2022E
TECHNICAL NOTE
CAUTION
®
ALUMINUMPOLYMER
ELECTROLYTIC
CONDUCTIVE
HYBRID CAPACITORS
ALUMINUM ELECTROLYTIC CAPACITORS
WITH CONDUCTIVE
POLYMER
SOLID
ELECTROLYTE
ALUMINUM ELECTROLYTIC CAPACITORS
WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE
• Before transportation of electronic equipment to
overseas, fumigation process may be subjected to
wooden packing material with a halogen
(compound) gas such as methyl bromide. Exercise
care that this halogen gas may corrode capacitors.
Also, be careful of epidemic preventive agent as
corrosive component such as halogen may be
contained.
11. The case of Conductive Polymer Hybrid Aluminum Electrolytic Capacitors, Solid Conductive
Polymer Aluminum Electrolytic Capacitors and
the cathode terminal are not insulated.
• The case and the cathode terminal are not insulated
as being connected through inconstant resistance.
12. Double-sided PCB’s
• When using capacitors on a double-sided PCB,
exercise care that the wiring pattern does not touch
the area where the capacitors are mounted. Failure
to do so may cause a short to occur to the PCB
depending on the mounting conditions.
13. Regarding Connection of Conductive Polymer
Hybrid Aluminum Electrolytic Capacitors, Solid
Conductive Polymer Aluminum Electrolytic
Capacitors
• When connecting more than one capacitor in
parallel, consider the current balance.
14. Use at a high altitude
• The use of capacitors at high altitudes such as on an
airplane causes a large difference between the
internal pressure of the capacitors and the atmospheric
pressure. However, there is no problem in use under
atmospheric pressure up to about an altitude of
10,000 meters.
If the condition is severe like space, please contact us.
15. Other Notes
• Do not use capacitors on a circuit where rapid
charge and discharge are repeated.
• Electrical characteristics of capacitors vary by
variations in temperature and frequency. Please
consider these variations when designing a circuit.
Cautions for Mounting
1. Cautions for Mounting
• Do not reuse capacitors that have been assembled
in a set and energized. Capacitors cannot be reused
except for those which have been measured on
electrical performance during periodic inspection.
• Before mounting, confirm the capacitor ratings
(rated capacitance and rated voltage).
• Capacitors may generate transient recovery voltage.
In this case, discharge through a resistor of about
1 kΩ.
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
•
•
•
•
Before mounting, confirm the polarity of capacitor.
Do not drop capacitors onto a floor nor use them.
Do not mount deformed capacitors.
Do not mount heating parts around capacitors and
on the back of the PCB under or back of capacitors).
2. Do not apply excessive pressure to the capaci-tor or its terminals
• Be careful of the shock force that can be produced
by absorbers, product checkers, and centering on
automatic inserters and installers.
3. Soldering
• Do not solder capacitor body by dipping into melted
solder.
• Soldering
conditions
(preheating,
soldering
temperature, terminal dipping time) should be within
the ranges specified in the catalog or the delivery
specification.
Please refer to individual page.
• Flux should not adhere to the parts other than the
terminals.
• When using a soldering iron, avoid excessive stress
to capacitor body.
• Although leakage current may increase (from a few
µA to hundreds of µA) after soldering, it can be
reduced through self-repair by applying voltage. It is
advised to operate the set properly after treating
with the recommended voltage.
• In case of a long-term use of equipment, control the
soldering characteristics so that capacitors and PCB
do not fail to connect to avoid abnormal current
passage by a failure of soldering to mount.
4. Handling after Soldering
• Do not tilt, fall, raise or twist capacitor body.
• Do not pick up or move PCB by holding a capacitor.
• Do not bump capacitors against objects. When
stacking PCB’s, make sure that capacitors do not
touch the PCB’s or other components.
• Do not subject capacitors to excessive stress.
5. Cleaning after Soldering
• Recommended cleaning method
①Cleaning solutions:
(a) CLEANTHROUGH 710M, 750H, 750L
(b) PINEALPHA ST-100S
(c) Techno Care FRW-4~17
(d) Isopropyl alcohol (2-propanol)
②Cleaning conditions:
(a) The temperature of cleaning solution shall be
less than 60°C.
(b) Use immersion or ultrasonic waves within two
minutes.
CAT.No.2021/2022E
TECHNICAL
CAUTION NOTE
ALUMINUMELECTROLYTIC
ELECTROLYTIC
CAPACITORS
CONDUCTIVE POLYMER HYBRID ALUMINUM
CAPACITORS
WITH
CONDUCTIVE
POLYMER
SOLID
ELECTROLYTE
ALUMINUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER
SOLID
ELECTROLYTE
(c) After cleaning, capacitors and PCB’s shall
thoroughly be rinsed and dried with hot blast
for more than 10 minutes. The temperature of
such breeze should be less than the upper
category temperature.
(d) After cleaning, do not keep capacitors in
cleaning solution atmosphere or airtight
containers.
• During cleaning, control the cleaning solution against
contamination.
6. Fixing adhesives and coating materials.
• Do not use halogenated fixatives and coatings.
• Before using a fixative or coating, remove flux
residues and contaminants from between the PCB
and the sealing section of capacitors.
• Dry the cleaning solution before using the adhesive
or coating.
• Do not cover up all the sealing sections (terminal
side) of capacitors with the adhesive or coating.
• Heat curing conditions of fixative and coating.
Other Cautions
1. Do not directly touch the terminals of Conductive Polymer Hybrid Aluminum Electrolytic
Capacitors, Solid Conductive Polymer Aluminum Electrolytic Capacitors.
Failure to do so can cause electric shock or burns.
Before use, allow capacitors to discharge through a
1kΩ resistor (with a sufficient margin to the heat
generation capacity) as needed.
2. Do not short-circuit between the terminals of the
Conductive Polymer Hybrid Aluminum Electrolytic Capacitors, Solid Conductive Polymer
Aluminum Electrolytic Capacitors. Do not
subject capacitors to conductive solutions such
as acid and alkaline water solutions.
3. Periodic inspection should be performed on the
capacitors for the industrial equipment application.
Check the following checkpoints.
• Visual inspection to check for significant defects.
• Electrical performance: leakage current, rated
capacitance, tangent of loss angle, ESR, and items
specified in the catalog or the specification.
4. Be careful of the following cases of emergency.
• In case of a short during use of capacitors in sets,
producing gas, turn off the main power of the set or
unplug the power cord from the outlet.
• In case of a short, producing gas, it may take a few
seconds to a few minutes depending on the
conditions. Therefore, ensure that the protective circuit
of the power supply works during this time.
• If the gas gets in your eyes, rinse them immediately.
Gargle if the gas is inhaled.
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
®
• Do not lick the electrolyte of capacitors. When the
electrolyte gets on your skin, wash it off with soap
immediately.
5. Storage Conditions.
• Do not store at high temperature and high humidity.
Store at a temperature of 5 to 35°C and a relative
humidity of less than 75%, keeping free from direct
sunlight.
• Solid conductive polymer aluminum electrolytic
capacitors are during delivery, stored in airtight
moistureproof bags to ensure satisfactory soldering.
Once the bag is opened right before mounting, it is
better to use up the capacitors. If some are unavoidably left over, return them to the moistureproof bag,
and seal the opening hermetically.
• There may have increased leakage current when
unused or stored for a long time after mounted on
equipment. This phenomenon often occurs at high
ambient temperatures; however, leakage current will
decrease through voltage treatment. If leakage
current still increases after a lapse of more than one
year at ambient temperature (shorter time at high
temperatures), treat with voltage as needed. In
design of equipment, consider the effect of increase
in initial current, and install protective circuits as
needed.
Please check that recommended voltage treatment
conditions are provided for each series.
• Do not store capacitors in an environment directly
exposed to water, saltwater spray, oil spill or
condensation.
• Do not store capacitors in an environment filled with
toxic gas such as hydrogen sulfide, sulfurous acid,
nitrous acid, chlorine, ammonia, etc.
• Do not store capacitors in a place exposed to ozone,
ultraviolet rays, or radiation.
6. Please take the following actions when disposing of Conductive Polymer Hybrid Aluminum
Electrolytic Capacitors, Solid Conductive Polymer Aluminum Electrolytic Capacitors.
• Entrust to specialists of industrial waste treatment for
incineration.
7. Others
• Before using capacitors, check the details of the
specification and catalog as well as the following.
Technical Report of Japan Electronics and Information
Technology Industries Association
EIAJ RCR-2367
Guideline of notabilia for fixed aluminum electrolytic
capacitors for use in electronic equipment
CAT.No.2021/2022E
HV,HT
HV,HT
☆UPGRADE
CONDUCTIVE
POLYMER HYBRID ALUMINUM
ELECTROLYTIC
CAPACITORS
CONDUCTIVE POLYMER
HYBRID ALUMINUM ELECTROLYTIC CAPACITORS
Conductive Polymer Hybrid Capacitors
●
●
●
●
GREEN
CAP
Low
ESR
SMD
105˚C
10000hours
Low ESR and high ripple current are realized.
HT is resist to vibration. (30G guaranteed)
Equivalent to conductive polymer type Aluminum Electrolytic Capacitor.
(There are little characteristics change by temperature and frequency)
Guaranteed 105℃, 10000 hours.
Vibration resistance
HT
HV
Marking color : Blue print
Specifications
Item
Performance
−55∼+105
±20
Category temperature range (℃)
Tolerance at rated capacitance (%)
Leakage current (µA)
(max.)
6.3V to 80V : 0.01CV or 3 whichever is larger (after 2 minutes)
100V : 0.05CV or 15 whichever is larger (after 2 minutes),
Rated voltage (V)
tanδ
(max.)
Tangent of loss angle
(tanδ)
6.3
0.20
10
0.18
16
0.16
(20℃, 120Hz)
: Rated capacitance (µF) ; V : Rated voltage (V)
25
0.14
35
0.12
50
0.10
63
0.08
(20℃)
80
0.08
100
0.08
(20℃, 120Hz)
Characteristics at high
and low temperature
Z−25℃/Z+20℃
Z−55℃/Z+20℃
Impedance ratio (max.)
(100kHz)
10000 hours
The initial specified value or less
Within ±30% of initial value
200% or less of the initial specified value
200% or less of the initial specified value
Test time
Leakage current
Percentage of capacitance change
Tangent of the loss angle
ESR change
Endurance (105℃)
(Applied ripple current)
1.5
2.0
Test time : 1000hours ; other items are same as the endurance. Voltage application treatment : According to JIS C5101-4 4.1.
Shelf life (105℃)
Outline Drawing
Unit : mm
Series HT
0.3 max.
A±0.2
(C)
L
W
L
(P)
B±0.2
φD±0.5
(C)
(C)
(P)
B±0.2
φD±0.5
M
A±0.2
(C)
0.3 max.
M
Series HV
W
: Dummy terminal
( ) : Reference size
φD
5
6.3
6.3
8
8
10
10
10
12.5
L
5.8±0.3
5.8±0.3
7.7±0.3
8.7±0.3
10±0.5
8.7±0.3
10±0.5
12.5±0.5
13.5±0.5
A
5.3
6.6
6.6
8.4
8.4
10.4
10.4
10.4
13.0
B
5.3
6.6
6.6
8.4
8.4
10.4
10.4
10.4
13.0
C
2.3
2.7
2.7
3.0
3.0
3.3
3.3
3.3
4.9
M
0.4±0.2
0.4±0.2
0.4±0.2
0.4±0.2
0.4±0.2
0.4±0.2
0.4±0.2
0.4±0.2
0.7±0.3
W
0.5 to 0.8
0.5 to 0.8
0.5 to 0.8
0.5 to 0.8
0.7 to 1.1
0.7 to 1.1
0.7 to 1.1
0.7 to 1.1
1.0 to 1.4
P
1.5
2.0
2.0
3.1
3.1
4.7
4.7
4.7
4.6
Casing symbol
E61
F61
F80
G90
G10
H90
H10
HC5
IE
( ) : Reference size
C
M
B
A
L
φD
6.3
5.8±0.3
6.6
6.6 2.7 0.4±0.2
6.3
7.7±0.3
6.6
6.6 2.7 0.4±0.2
8.4 3.0 0.4±0.2
8.4
10±0.5
8
10±0.5 10.4 10.4 3.3 0.4±0.2
10
10 12.5±0.5 10.4 10.4 3.3 0.4±0.2
12.5 13.5±0.5 13.0 13.0 4.9 0.7±0.3
W
0.5 to
0.5 to
0.7 to
0.7 to
0.7 to
1.0 to
0.8
0.8
1.1
1.1
1.1
1.4
P Casing symbol
2.0
F61
2.0
F80
3.1
G10
4.7
H10
4.7
HC5
4.6
IE
Refer to individual page (Soldering conditions, Land pattern size, The taping specifications).
Coefficient of Frequency for Rated Ripple Current
Frequency (Hz)
Rated voltage (V)
6.3 to 100
120
1k
10k
100k or more
0.10
0.30
0.60
1
Part numbering system
HV (example : 35V270µF)
HV
̶
35
V
Rated voltage
symbol
Series code
271
M
Rated
capacitance
symbol
Capacitance
tolerance symbol
H10 E ̶
Casing
symbol
Taping
symbol
HT (example : 35V270µF)
HT
Series code
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
̶
35
Rated voltage
symbol
V
271
M
Rated
capacitance
symbol
Capacitance
tolerance symbol
H10 E ̶
Casing
symbol
Taping
symbol
CAT.No.2021/2022E
HV,HT
☆UPGRADE
CONDUCTIVE POLYMER HYBRID ALUMINUM ELECTROLYTIC CAPACITORS
HV series Standard Ratings
Rated voltage (V)
6.3
10
16
25
Rated
capacitance
ESR
Rated ripple
current
Rated
capacitance
ESR
Rated ripple
current
Rated
capacitance
ESR
Rated ripple
current
Rated
capacitance
ESR
Rated ripple
current
(µF)
(mΩ max.)
(mArms)
(µF)
(mΩ max.)
(mArms)
(µF)
(mΩ max.)
(mArms)
(µF)
(mΩ max.)
(mArms)
—
—
—
—
—
—
47
80
900
33
80
900
6.3×5.8
220
45
1600
100
45
1600
82
45
1600
56
50
1300
6.3×7.7
2000
Item
Case
φD×L (mm)
5×5.8
330
24
2300
220
24
2300
150
27
2200
100
30
8×8.7
—
—
—
—
—
—
—
—
—
150
27
2100
8×10
560
22
2500
330
22
2500
270
22
2500
220
27
2300
10×8.7
—
—
—
—
—
—
—
—
—
270
25
2400
10×10
820
18
2600
470
18
2600
470
18
2600
330
20
2500
10×12.5
—
—
—
—
—
—
—
—
—
560
18
3500
12.5×13.5
—
—
—
—
—
—
—
—
—
820
15
4000
Rated
capacitance
ESR
Rated ripple
current
Rated
capacitance
ESR
Rated ripple
current
Rated
capacitance
ESR
Rated ripple
current
(µF)
(µF)
(mArms)
Rated voltage (V)
Item
Case
φD×L (mm)
35
50
63
(mΩ max.)
(mArms)
(mΩ max.)
(mArms)
(µF)
(mΩ max.)
5×5.8
22
100
900
10
120
750
—
—
—
6.3×5.8
47
60
1300
22
80
1100
10
120
1000
6.3×7.7
68
35
2000
33
40
1600
22
80
1500
8×8.7
100
30
2100
47
35
1700
27
50
1600
1600
8×10
150
27
2300
68
30
1800
33
40
10×8.7
220
25
2400
82
28
1900
47
35
1700
10×10
270
20
2500
100
28
2000
56
30
1800
10×12.5
390
18
3500
150
24
3000
100
26
2500
12.5×13.5
560
15
4000
330
20
3600
120
22
3000
Rated voltage (V)
80
100
Rated
capacitance
ESR
Rated ripple
current
Rated
capacitance
ESR
Rated ripple
current
(µF)
(mΩ max.)
(mArms)
(µF)
(mΩ max.)
(mArms)
8×10
22
45
1550
—
—
—
10×10
33
36
1700
15
45
1600
Item
Case
φD×L (mm)
(Note) Rated ripple current : 105℃ , 100kHz ; ESR : 20℃ , 100kHz
HT series Standard Ratings
Rated voltage (V)
6.3
10
16
25
Rated
capacitance
ESR
Rated ripple
current
Rated
capacitance
ESR
Rated ripple
current
Rated
capacitance
ESR
Rated ripple
current
Rated
capacitance
ESR
Rated ripple
current
(µF)
(mΩ max.)
(mArms)
(µF)
(mΩ max.)
(mArms)
(µF)
(mΩ max.)
(mArms)
(µF)
(mΩ max.)
(mArms)
6.3×5.8
220
45
1600
100
45
1600
82
45
1600
56
50
1300
6.3×7.7
330
24
2300
220
24
2300
150
27
2200
100
30
2000
8×10
560
22
2500
330
22
2500
270
22
2500
220
27
2300
10×10
820
18
2600
470
18
2600
470
18
2600
330
20
2500
10×12.5
—
—
—
—
—
—
—
—
—
560
18
3500
12.5×13.5
—
—
—
—
—
—
—
—
—
820
15
4000
Rated
capacitance
ESR
Rated ripple
current
Rated
capacitance
ESR
Rated ripple
current
Rated
capacitance
ESR
Rated ripple
current
(µF)
(µF)
(µF)
(mΩ max.)
(mArms)
Item
Case
φD×L (mm)
Rated voltage (V)
Item
Case
φD×L (mm)
35
50
63
(mΩ max.)
(mArms)
(mΩ max.)
(mArms)
6.3×5.8
47
60
1300
22
80
1100
10
120
1000
6.3×7.7
68
35
2000
33
40
1600
22
80
1500
1600
8×10
150
27
2300
68
30
1800
33
40
10×10
270
20
2500
100
28
2000
56
30
1800
10×12.5
390
18
3500
150
24
3000
100
26
2500
12.5×13.5
560
15
4000
330
20
3600
120
22
3000
Rated
capacitance
ESR
Rated ripple
current
Rated
capacitance
ESR
Rated ripple
current
(µF)
(mΩ max.)
(mArms)
(µF)
(mΩ max.)
(mArms)
8×10
22
45
1550
—
—
—
10×10
33
36
1700
15
45
1600
Rated voltage (V)
Item
Case
φD×L (mm)
80
100
(Note) Rated ripple current : 105℃ , 100kHz ; ESR : 20℃ , 100kHz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
HVK,HTK
HVK,HTK
CONDUCTIVE POLYMER HYBRID ALUMINUM
ELECTROLYTIC
CONDUCTIVE
POLYMERCAPACITORS
HYBRID ALUMINUM ELECTROLYTIC CAPACITORS
☆UPGRADE
Conductive Polymer Hybrid Capacitors
●
●
●
GREEN
CAP
Low
ESR
SMD
125˚C
125˚C
4000hours 6000hours
Low ESR and high ripple current are realized.
HTK is resist to vibration. (30G guaranteed)
Equivalent to conductive polymer type Aluminum Electrolytic Capacitor.
(There are little characteristics change by temperature and frequency)
Marking color : Blue print
4000h
Vibration resistance
HTK
6000h
High temperature
HVK
Long life
HV
HVK-B
HTK-B
HVK
HTK
Specifications
Item
Performance
−55∼+125
±20
Category temperature range (℃)
Tolerance at rated capacitance (%)
Leakage current (µA)
(max.)
(20℃, 120Hz)
6.3V to 80V : 0.01CV or 3 whichever is larger (after 2 minutes)
100V : 0.05CV or 15 whichever is larger (after 2 minutes),
Rated voltage (V)
tanδ
(max.)
Tangent of loss angle
(tanδ)
6.3
0.20
10
0.18
: Rated capacitance (µF) ; V : Rated voltage (V)
16
0.16
25
0.14
35
0.12
50
0.10
63
0.08
(20℃)
80
0.08
100
0.08
(20℃, 120Hz)
Characteristics at high
and low temperature
Z−25℃/Z+20℃
Z−55℃/Z+20℃
Impedance ratio (max.)
4000 hours
The initial specified value or less
Within ±30% of initial value
200% or less of the initial specified value
200% or less of the initial specified value
Test time
Leakage current
Percentage of capacitance change
Tangent of the loss angle
ESR change
Endurance (125℃)
(Applied ripple current)
1.5
2.0
(100kHz)
6000 hours (25V∼50V:φ6.3 or more)
The initial specified value or less
Within ±30% of initial value
200% or less of the initial specified value
200% or less of the initial specified value
Test time : 1000hours ; other items are same as the endurance. Voltage application treatment : According to JIS C5101-4 4.1.
Shelf life (125℃)
Outline Drawing
Unit : mm
Series HTK
0.3 max.
A±0.2
(C)
L
W
L
(P)
B±0.2
φD±0.5
(C)
(C)
(P)
B±0.2
φD±0.5
M
A±0.2
(C)
0.3 max.
M
Series HVK
W
: Dummy terminal
( ) : Reference size
φD
5
6.3
6.3
8
8
10
10
10
12.5
L
5.8±0.3
5.8±0.3
7.7±0.3
8.7±0.3
10±0.5
8.7±0.3
10±0.5
12.5±0.5
13.5±0.5
A
5.3
6.6
6.6
8.4
8.4
10.4
10.4
10.4
13.0
B
5.3
6.6
6.6
8.4
8.4
10.4
10.4
10.4
13.0
C
2.3
2.7
2.7
3.0
3.0
3.3
3.3
3.3
4.9
M
0.4±0.2
0.4±0.2
0.4±0.2
0.4±0.2
0.4±0.2
0.4±0.2
0.4±0.2
0.4±0.2
0.7±0.3
W
0.5 to
0.5 to
0.5 to
0.5 to
0.7 to
0.7 to
0.7 to
0.7 to
1.0 to
0.8
0.8
0.8
0.8
1.1
1.1
1.1
1.1
1.4
P
1.5
2.0
2.0
3.1
3.1
4.7
4.7
4.7
4.6
Casing symbol
E61
F61
F80
G90
G10
H90
H10
HC5
IE
Refer to individual page.
(Soldering conditions, Land pattern size, The taping specifications)
( ) : Reference size
L
A
B
C
M
φD
6.3
5.8±0.3
6.6
6.6 2.7 0.4±0.2
6.3
7.7±0.3
6.6
6.6 2.7 0.4±0.2
10±0.5
8.4
8.4 3.0 0.4±0.2
8
10±0.5 10.4 10.4 3.3 0.4±0.2
10
10 12.5±0.5 10.4 10.4 3.3 0.4±0.2
12.5 13.5±0.5 13.0 13.0 4.9 0.7±0.3
W
0.5 to
0.5 to
0.7 to
0.7 to
0.7 to
1.0 to
0.8
0.8
1.1
1.1
1.1
1.4
P Casing symbol
2.0
F61
2.0
F80
3.1
G10
4.7
H10
4.7
HC5
4.6
IE
Coefficient of Frequency for Rated Ripple Current
Frequency (Hz)
Rated voltage (V)
6.3 to 100
120
1k
10k
100k or more
0.10
0.30
0.60
1
4000 hours guaranteed: Part numbering system
6000 hours guaranteed: Part numbering system
HVK (example : 16V470µF)
HVK-B (example : 25V100µF)
HVK
̶
16
V
Rated voltage
symbol
Series code
471
M
Rated
capacitance
symbol
Capacitance
tolerance symbol
HVK
H10 E ̶
Casing
symbol
Taping
symbol
HTK (example : 63V56µF)
HTK
Series code
̶
63
Rated voltage
symbol
̶
25
V
Rated voltage
symbol
Series code
101
M
Rated
capacitance
symbol
Capacitance
tolerance symbol
F80 B ̶
Casing
symbol
Taping
symbol
HTK-B (example : 25V100µF)
V
560
M
Rated
capacitance
symbol
Capacitance
tolerance symbol
H10 E ̶
Casing
symbol
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
HTK
Taping
symbol
Series code
̶
25
Rated voltage
symbol
V
101
M
Rated
capacitance
symbol
Capacitance
tolerance symbol
F80 B ̶
Casing
symbol
Taping
symbol
CAT.No.2021/2022E
HVK,HTK
☆UPGRADE
CONDUCTIVE POLYMER HYBRID ALUMINUM ELECTROLYTIC CAPACITORS
HVK series Standard Ratings(●Marked: 6000 hours guaranteed)
Rated voltage (V)
6.3
10
16
25
Rated
capacitance
ESR
Rated ripple
current
Rated
capacitance
ESR
Rated ripple
current
Rated
capacitance
ESR
Rated ripple
current
(µF)
(mΩ max.)
(mArms)
(µF)
(mΩ max.)
(mArms)
(µF)
(mΩ max.)
(mArms)
—
—
—
—
—
—
47
70
600
33
80
550
6.3×5.8
220
45
950
100
45
950
82
45
950
●
56
50
900
6.3×7.7
Item
Case
φD×L (mm)
5×5.8
Rated
capacitance
ESR
Rated ripple
current
(µF)
(mΩ max.)
(mArms)
330
24
1450
220
24
1450
150
27
1450
●
100
30
1400
8×8.7
—
—
—
—
—
—
—
—
—
●
150
27
1500
1600
8×10
560
22
1700
330
22
1700
270
22
1700
●
220
27
10×8.7
—
—
—
—
—
—
—
—
—
●
270
25
1700
10×10
820
18
2100
470
18
2100
470
18
2100
●
330
20
2000
10×12.5
—
—
—
—
—
—
—
—
—
●
560
18
3000
12.5×13.5
—
—
—
—
—
—
—
—
—
●
820
15
3500
Rated
capacitance
ESR
Rated ripple
current
Rated
capacitance
ESR
Rated ripple
current
Rated
capacitance
ESR
Rated ripple
current
(µF)
(µF)
(mArms)
Rated voltage (V)
Item
Case
φD×L (mm)
35
5×5.8
6.3×5.8
●
50
(mΩ max.)
(mArms)
22
100
550
47
60
900
63
(mΩ max.)
(mArms)
(µF)
(mΩ max.)
10
120
500
—
—
—
●
22
80
750
10
120
700
6.3×7.7
●
68
35
1400
●
33
40
1100
22
80
900
8×8.7
●
100
30
1500
●
47
35
1200
27
50
1000
8×10
●
150
27
1600
●
68
30
1250
33
40
1100
10×8.7
●
220
25
1700
●
82
28
1400
47
35
1200
10×10
●
270
20
2000
●
100
28
1600
56
30
1400
10×12.5
●
390
18
3000
●
150
24
2500
100
26
2000
12.5×13.5
●
560
15
3500
●
330
20
3000
120
22
2500
Rated voltage (V)
80
100
Rated
capacitance
ESR
Rated ripple
current
Rated
capacitance
ESR
Rated ripple
current
(µF)
(mΩ max.)
(mArms)
(µF)
(mΩ max.)
(mArms)
8×10
22
45
1100
—
—
—
10×10
33
36
1200
15
45
1000
Item
Case
φD×L (mm)
(Note) Rated ripple current : 125℃ , 100kHz ; ESR : 20℃ , 100kHz
HTK series Standard Ratings(●Marked: 6000 hours guaranteed)
Rated voltage (V)
6.3
10
16
25
Rated
capacitance
ESR
Rated ripple
current
Rated
capacitance
ESR
Rated ripple
current
Rated
capacitance
ESR
Rated ripple
current
Rated
capacitance
ESR
Rated ripple
current
(µF)
(mΩ max.)
(mArms)
(µF)
(mΩ max.)
(mArms)
(µF)
(mΩ max.)
(mArms)
(µF)
(mΩ max.)
(mArms)
6.3×5.8
220
45
950
100
45
950
82
45
950
●
56
50
900
6.3×7.7
330
24
1450
220
24
1450
150
27
1450
●
100
30
1400
8×10
560
22
1700
330
22
1700
270
22
1700
●
220
27
1600
10×10
820
18
2100
470
18
2100
470
18
2100
●
330
20
2000
10×12.5
—
—
—
—
—
—
—
—
—
●
560
18
3000
12.5×13.5
—
—
—
—
—
—
—
—
—
●
820
15
3500
Rated
capacitance
ESR
Rated ripple
current
Rated
capacitance
ESR
Rated ripple
current
Rated
capacitance
ESR
Rated ripple
current
(µF)
(µF)
(µF)
(mΩ max.)
(mArms)
Item
Case
φD×L (mm)
Rated voltage (V)
Item
Case
φD×L (mm)
35
50
63
(mΩ max.)
(mArms)
(mΩ max.)
(mArms)
6.3×5.8
●
47
60
900
●
22
80
750
10
120
700
6.3×7.7
●
68
35
1400
●
33
40
1100
22
80
900
8×10
●
150
27
1600
●
68
30
1250
33
40
1100
10×10
●
270
20
2000
●
100
28
1600
56
30
1400
10×12.5
●
390
18
3000
●
150
24
2500
100
26
2000
12.5×13.5
●
560
15
3500
●
330
20
3000
120
22
2500
Rated
capacitance
ESR
Rated ripple
current
Rated
capacitance
ESR
Rated ripple
current
(µF)
(mΩ max.)
(mArms)
(µF)
(mΩ max.)
(mArms)
8×10
22
45
1100
—
—
—
10×10
33
36
1200
15
45
1000
Rated voltage (V)
Item
Case
φD×L (mm)
80
100
(Note) Rated ripple current : 125℃ , 100kHz ; ESR : 20℃ , 100kHz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
HVX,HTX
HVX,HTX
☆UPGRADE
CONDUCTIVE POLYMER HYBRID ALUMINUM ELECTROLYTIC CAPACITORS
Conductive Polymer Hybrid Capacitors
●
●
●
●
GREEN
CAP
SMD
Low
ESR
135˚C
4000hours
Low ESR and high ripple current are realized.
HTX is resist to vibration. (30G guaranteed)
Equivalent to conductive polymer type Aluminum Electrolytic Capacitor.
(There are little characteristics change by temperature and frequency)
Guaranteed 135℃, 4000 hours.(φ6.3: 2000 hours)
Vibration resistance
HTX
Specifications
High temperature
HVX
HVK
Item
Marking color : Blue print
Tolerance at rated capacitance (%)
Performance
−55∼+135
±20
Leakage current (µA)
(max.)
0.01CV or 3 whichever is larger (after 2 minutes)
C : Rated capacitance (µF) , V : Rated voltage (V)
Category temperature range (℃)
Rated voltage (V)
tanδ
(max.)
Tangent of loss angle
(tanδ)
16
0.16
(20℃, 120Hz)
25
0.14
(20℃)
35
0.12
50
0.10
63
0.08
(20℃, 120Hz)
Characteristics at high
and low temperature
Z−25℃/Z+20℃
Z−55℃/Z+20℃
Impedance ratio (max.)
(100kHz)
4000 hours(φ6.3: 2000 hours)
The initial specified value or less
Within ±30% of initial value
200% or less of the initial specified value
200% or less of the initial specified value
Test time
Leakage current
Percentage of capacitance change
Tangent of the loss angle
ESR change
Endurance (135℃)
(Applied ripple current)
1.5
2.0
Test time : 1000hours ; other items are same as the endurance. Voltage application treatment : According to JIS C5101-4 4.1.
Shelf life (135℃)
Outline Drawing
(C)
(P)
B±0.2
φD±0.5
L
W
L
A±0.2
(C)
(P)
0.3 max.
W
: Dummy terminal
( ) : Reference size
( ) : Reference size
●
●
φD
6.3
6.3
8
10
10
L
5.8±0.3
7.7±0.3
10±0.5
10±0.5
12.5±0.5
A
6.6
6.6
8.4
10.4
10.4
B
6.6
6.6
8.4
10.4
10.4
C
2.7
2.7
3.0
3.3
3.3
0.5
0.5
0.7
0.7
0.7
W
to 0.8
to 0.8
to 1.1
to 1.1
to 1.1
P
2.0
2.0
3.1
4.7
4.7
Casing symbol
F61
F80
G10
H10
HC5
(C)
Series HTX
(C)
A±0.2
B±0.2
φD±0.5
0.3 max.
0.4±0.2
Series HVX
0.4±0.2
Unit : mm
●
●
φD
6.3
6.3
8
10
10
L
5.8±0.3
7.7±0.3
10±0.5
10±0.5
12.5±0.5
A
6.6
6.6
8.4
10.4
10.4
B
6.6
6.6
8.4
10.4
10.4
C
2.7
2.7
3.0
3.3
3.3
0.5
0.5
0.7
0.7
0.7
W
to
to
to
to
to
0.8
0.8
1.1
1.1
1.1
P
2.0
2.0
3.1
4.7
4.7
Casing symbol
F61
F80
G10
H10
HC5
(●Marked:2000 hours guaranteed)
Refer to individual page (Soldering conditions, Land pattern size, The taping specifications).
Coefficient of Frequency for Rated Ripple Current
Frequency (Hz)
Rated voltage (V)
16 to 63
120
1k
10k
100k or more
0.10
0.30
0.60
1
Part numbering system
HVX (example : 16V270µF)
HVX
̶
16
V
Rated voltage
symbol
Series code
271
M
Rated
capacitance
symbol
Capacitance
tolerance symbol
G10 ̶
Casing
symbol
Taping
symbol
HTX (example : 16V270µF)
HTX
Series code
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
̶
16
Rated voltage
symbol
V
271
M
Rated
capacitance
symbol
Capacitance
tolerance symbol
G10 ̶
Casing
symbol
Taping
symbol
CAT.No.2021/2022E
HVX,HTX
☆UPGRADE
CONDUCTIVE POLYMER HYBRID ALUMINUM ELECTROLYTIC CAPACITORS
Standard Ratings(●Marked: 2000 hours guaranteed)
Rated voltage (V)
Item
Rated
capacitance (µF)
16
25
35
50
Case
ESR
Rated ripple
current
Case
ESR
Rated ripple
current
Case
ESR
Rated ripple
current
Case
ESR
Rated ripple
current
φD×L (mm)
(mΩ max.)
(mArms)
φD×L (mm)
(mΩ max.)
(mArms)
φD×L (mm)
(mΩ max.)
(mArms)
φD×L (mm)
(mΩ max.)
(mArms)
22
—
—
—
—
—
—
—
—
—
● 6.3×5.8
80
750
33
—
—
—
—
—
—
—
—
—
● 6.3×7.7
40
1100
47
—
—
—
60
900
—
—
—
56
—
—
—
—
—
—
—
—
68
—
—
—
35
1400
8×10
30
1250
45
950
—
—
● 6.3×5.8
82
—
100
● 6.3×7.7
—
● 6.3×5.8
—
—
● 6.3×7.7
—
—
50
900
—
—
● 6.3×5.8
—
● 6.3×7.7
—
—
—
—
—
—
—
—
30
1400
—
—
—
10×10
28
1600
10×12.5
27
1450
—
—
—
8×10
27
1600
24
2500
220
—
—
—
8×10
22
1600
—
—
—
—
—
—
270
8×10
20
1700
—
—
—
10×10
22
2000
—
—
—
330
—
—
—
10×10
20
2000
—
—
—
—
—
—
—
150
390
—
—
—
—
—
—
18
3000
—
—
470
10×10
18
2100
—
—
—
—
—
—
—
—
—
560
—
—
—
10×12.5
18
3000
—
—
—
—
—
—
Case
ESR
Rated ripple
current
φD×L (mm)
(mΩ max.)
(mArms)
Rated voltage (V)
Item
Rated
capacitance (µF)
63
10
● 6.3×5.8
120
700
22
● 6.3×7.7
80
900
33
8×10
40
1100
56
10×10
30
1400
10×12.5
26
2000
100
10×12.5
(Note) Rated ripple current : 135℃ , 100kHz ; ESR : 20℃ , 100kHz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
HVQ,HTQ
★NEW
CONDUCTIVE POLYMER HYBRID ALUMINUM ELECTROLYTIC CAPACITORS
GREEN
CAP
Conductive Polymer Hybrid Capacitors
Low
ESR
SMD
150˚C
1000hours
Low ESR and high ripple current are realized.
• HTQ is resist to vibration. (30G guaranteed)
• Equivalent to conductive polymer type Aluminum Electrolytic Capacitor.
(There are little characteristics change by temperature and frequency)
• Guaranteed 150°C, 1000 hours.
●
Vibration resistance
HTQ
High temperature
HVQ
HVX
Marking color : Blue print
Specifications
Item
Performance
ー55 to +150
±20
Category temperature range (℃ )
Tolerance at rated capacitance (%)
Leakage current (µA)
(max.)
Tangent of loss angle
(tanδ)
Characteristics at high
and low temperature
(20℃,120Hz)
0.01CV or 3 whichever is larger (after 2 minutes)
C : Rated capacitance (µF) ; V : Rated voltage (V) (20℃)
Rated voltage (V)
tanδ (max.)
16
0.16
25
0.14
35
0.12
50
0.10
63
0.08
(20℃,120Hz)
Z−25℃/Z+20℃
Z−55℃/Z+20℃
Impedance ratio (max.)
1.5
2.0
(100Hz)
Test time
Leakage current
Percentage of capacitance change
Tangent of the loss angle
ESR change
Endurance (150℃)
(Applied ripple current)
Shelf life (150℃)
1000 hours
The initial specified value or less
Within ±30% of initial value
200% or less of the initial specified value
200% or less of the initial specified value
Test time : 1000hours ; other items are same as the endurance. Voltage application treatment : According to JIS C5101-4 4.1.
Outline Drawing
W
L
0.3 max.
(C)
A±0.2
(P)
L
(C)
φD±0.5
(P)
(C)
B±0.2
φD±0.5
Series HTQ
(C)
A±0.2
B±0.2
0.3 max.
0.4±0.2
Series HVQ
0.4±0.2
Unit:mm
W
:Dummy terminal
( ) : Reference size
( ) : Reference size
φD
8
10
L
10±0.5
10±0.5
A
8.4
10.4
B
8.4
10.4
C
3.0
3.3
W
0.7 to 1.1
0.7 to 1.1
P
3.1
4.7
Casing symbol
G10
H10
φD
8
10
L
10±0.5
10±0.5
A
8.4
10.4
B
8.4
10.4
C
3.0
3.3
W
0.7 to 1.1
0.7 to 1.1
P
3.1
4.7
Casing symbol
G10
H10
Refer to individual page. (Soldering conditions, Land pattern size, The taping specifications)
Coefficient of Frequency for Rated Ripple Current
Frequency (Hz)
Rated voltage (V)
16 to 63
Part numbering system
120
1k
10k
100k or more
0.10
0.30
0.60
1
HVQ (example : 16V270µF)
HVQ —
Series code
16
V
Rated voltage
symbol
271
M
G10
Rated capacitance
symbol
Capacitance
tolerance symbol
Casing
symbol
271
M
G10
Rated capacitance
symbol
Capacitance
tolerance symbol
Casing
symbol
—
Taping
symbol
HTQ (example : 16V270µF)
HTQ —
Series code
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
16
Rated voltage
symbol
V
—
Taping
symbol
CAT.No.2021/2022E
HVQ,HTQ
★NEW
CONDUCTIVE POLYMER HYBRID ALUMINUM ELECTROLYTIC CAPACITORS
Standard Ratings
Rated voltage (V)
Item
Rated
capacitance (µF)
16
25
35
50
Case
ESR
Rated ripple
current
Case
ESR
Rated ripple
current
Case
ESR
Rated ripple
current
Case
ESR
Rated ripple
current
(mArms)
φD×L (mm)
(mΩ max.)
(mArms)
φD×L (mm)
(mΩ max.)
(mArms)
φD×L (mm)
(mΩ max.)
(mArms)
φD×L (mm)
(mΩ max.)
68
—
—
—
—
—
—
—
—
—
8×10
30
660
100
—
—
—
—
—
—
—
—
—
10×10
28
800
150
—
—
—
—
—
—
8×10
22
710
—
—
—
220
—
—
—
8×10
22
740
—
—
—
—
—
—
270
8×10
20
740
—
—
—
10×10
20
830
—
—
—
330
—
—
—
10×10
20
850
—
—
—
—
—
—
470
10×10
18
850
—
—
—
—
—
—
—
—
—
Case
ESR
Rated ripple
current
Rated voltage (V)
Item
Rated
capacitance (µF)
63
φD×L (mm)
(mΩ max.)
(mArms)
33
8×10
30
610
56
10×10
28
710
(Note) Rated ripple current : 150℃ , 100kHz ; ESR : 20℃ , 100kHz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
HR,HRK
CONDUCTIVE POLYMER HYBRID ALUMINUM ELECTROLYTIC CAPACITORS
Hybrid Capacitors radial lead type
●
●
●
●
GREEN
CAP
Low
ESR
105˚C
125˚C
10000hours 6000hours
Low ESR and high ripple current are realized.
Equivalent to conductive polymer type Aluminum Electrolytic Capacitor.
HR series : Guaranteed 105℃, 10000 hours.
HRK series: Guaranteed 125℃, 6000 hours (4000 hours: 63V or more).
High temperature
HRK
HR
Marking color : Blue print
Specifications
Performance
HR series : ̶ 55 to +105
HRK series : ̶ 55 to +125
Item
Category temperature range (℃)
(20℃, 120Hz)
±20
Tolerance at rated capacitance (%)
Leakage current (µA)
(max.)
25V to 80V: 0.01CV or 3 whichever is larger (after 2 minutes)
100V : 0.05CV or 15 whichever is larger (after 2 minutes),
Rated voltage (V)
tanδ
(max.)
Tangent of loss angle
(tanδ)
25
0.14
: Rated capacitance (µF) ; V : Rated voltage (V)
35
0.12
50
0.10
63
0.08
80
0.08
(20℃)
100
0.08
(20℃, 120Hz)
Characteristics at high
and low temperature
Z−25℃/Z+20℃
Z−55℃/Z+20℃
Impedance ratio (max.)
(100kHz)
HRK series
125°
C, 6000 hours (63V or more: 4000 hours)
The initial specified value or less
Within ±30% of initial value
200% or less of the initial specified value
200% or less of the initial specified value
HR series
105°
C, 10000 hours
The initial specified value or less
Within ±30% of initial value
200% or less of the initial specified value
200% or less of the initial specified value
Test temperature and time
Leakage current
Percentage of capacitance change
Tangent of the loss angle
ESR change
Endurance
(Applied ripple current)
1.5
2.0
Test time and temperature : 1000hours (HR series 105°
C), 1000hours (HRK series 125°
C)
Voltage application treatment : According to JIS C5101-4 4.1.
Shelf life
Outline Drawing
Unit : mm
Coefficient of Frequency for Rated Ripple Current
φd±0.05 copper plated steel wire (tinned)
Frequency (Hz)
25 to 100
F±0.5
φD±0.5
120
1k
10k
100k
0.10
0.30
0.60
1
Rated voltage (V)
Part numbering system
10000hours guaranteed: HR series (example : 35V270µF)
L+α max.
15min.
5
min.
HR
̶
Series code
Casing symbol
H2S
H3
φD
10
10
L
10
12.5
F
5.0
5.0
α
1.5
1.5
d
0.6
0.6
35
V
Rated voltage
symbol
271
M
Rated
capacitance
symbol
Capacitance
tolerance symbol
H2S E ̶
Casing
symbol
Taping(Forming)
symbol
4000hours guaranteed: HRK series (example : 63V56µF)
HRK
̶
63
V
Rated voltage
symbol
Series code
560
M
Rated
capacitance
symbol
Capacitance
tolerance symbol
H2S E ̶
Casing
symbol
Taping(Forming)
symbol
6000hours guaranteed: HRK-B series (example : 35V270µF)
HRK
Series code
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
̶
35
Rated voltage
symbol
V
271
M
Rated
capacitance
symbol
Capacitance
tolerance symbol
H2S B ̶
Casing
symbol
Taping(Forming)
symbol
CAT.No.2021/2022E
HR,HRK
CONDUCTIVE POLYMER HYBRID ALUMINUM ELECTROLYTIC CAPACITORS
HR series: Standard Ratings
Rated voltage (V)
Item
Rated
capacitance (µF)
25
35
50
63
Case
ESR
Rated ripple
current
Case
ESR
Rated ripple
current
Case
ESR
Rated ripple
current
Case
ESR
Rated ripple
current
(mArms)
φD×L (mm)
(mΩ max.)
(mArms)
φD×L (mm)
(mΩ max.)
(mArms)
φD×L (mm)
(mΩ max.)
(mArms)
φD×L (mm)
(mΩ max.)
56
—
—
—
—
—
—
—
—
—
10×10
30
1800
100
—
—
—
—
—
—
10×10
28
2000
10×12.5
26
2500
150
—
—
—
—
—
—
10×12.5
24
3000
—
—
—
270
—
—
—
10×10
20
2500
—
—
—
—
—
—
330
10×10
20
2500
—
—
—
—
—
—
—
—
—
390
—
—
—
10×12.5
18
3500
—
—
—
—
—
—
560
10×12.5
18
3500
—
—
—
—
—
—
—
—
—
Case
ESR
Rated ripple
current
Case
ESR
Rated ripple
current
Rated voltage (V)
Item
Rated
capacitance (µF)
80
100
φD×L (mm)
(mΩ max.)
(mArms)
φD×L (mm)
(mΩ max.)
(mArms)
15
—
—
—
10×10
45
1600
33
10×10
36
1700
—
—
—
(Note) Rated ripple current : 105℃ , 100kHz ; ESR : 20℃ , 100kHz
HRK series: Standard Ratings(●Marked: 6000 hours guaranteed)
Rated voltage (V)
Item
Rated
capacitance (µF)
25
35
50
63
Case
ESR
Rated ripple
current
Case
ESR
Rated ripple
current
Case
ESR
Rated ripple
current
Case
ESR
Rated ripple
current
(mArms)
φD×L (mm)
(mΩ max.)
(mArms)
φD×L (mm)
(mΩ max.)
(mArms)
φD×L (mm)
(mΩ max.)
(mArms)
φD×L (mm)
(mΩ max.)
56
—
—
—
—
—
—
—
—
—
10×10
30
1400
100
—
—
—
—
—
—
● 10×10
28
1600
10×12.5
26
2000
150
—
—
—
—
—
● 10×12.5
24
2500
—
—
—
270
—
—
—
20
2000
—
—
—
—
—
20
2000
—
—
18
3000
—
● 10×10
330
390
—
560
● 10×12.5
Rated voltage (V)
—
● 10×10
—
● 10×12.5
80
—
—
—
—
—
—
—
—
18
3000
—
—
—
—
—
—
—
—
—
—
—
—
—
—
100
Case
ESR
Rated ripple
current
Case
ESR
Rated ripple
current
φD×L (mm)
(mΩ max.)
(mArms)
φD×L (mm)
(mΩ max.)
(mArms)
15
—
—
—
10×10
45
1000
33
10×10
36
1200
—
—
—
Item
Rated
capacitance (µF)
—
(Note) Rated ripple current : 125℃ , 100kHz ; ESR : 20℃ , 100kHz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
PVX
PVX
ALUMINUM
ELECTROLYTIC
CAPACITORS
ALUMINUM ELECTROLYTIC
CAPACITORS
WITH
CONDUCTIVE
POLYMER
ELECTROLYTE
WITH CONDUCTIVE POLYMER SOLIDSOLID
ELECTROLYTE
Chip Type
●
●
GREEN
CAP
Low
ESR
SMD
105˚C
2000hours
®
Anticleaning
solvent
Super low ESR and high ripple current are realized.
Guaranteed 105℃, 2000 hours.
High CV
Low ESR
PVX
High CV
Low ESR
PVM
PVH
Marking color : Blue print
Specifications
Item
Performance
−55 to +105
±20
Category temperature range (℃)
Tolerance at rated capacitance (%)
Leakage current (µA)
(max.)
*
Note
(20℃,120Hz)
0.2CV (after 2 minutes)
C : Rated capacitance (µF) ; V : Rated voltage (V)
(20℃)
(20℃,120Hz)
0.12 or less
Tangent of the loss angle (tanδ)
Characteristics at high
and low temperature
Impedance ratio (max.)
Endurance (105℃)
(Applied ripple current)
Test time
Leakage current
Percentage of capacitance change
Tangent of the loss angle
ESR change
Z−25℃/Z+20℃
Z−55℃/Z+20℃
(100kHz)
2000 hours
The initial specified value or less
Within ±20% of initial value
150% or less of the initial specified value
150% or less of the initial specified value
500 hours
The initial specified value or less
Within ±20% of initial value
150% or less of the initial specified value
150% or less of the initial specified value
Test time
Leakage current
Percentage of capacitance change
Tangent of the loss angle
ESR change
Bias Humidity
60℃, 90 to 95%RH
1.15
1.25
The capacitors shall be subject to 1000 cycles each consisting of charge with the surge voltage specified at 105℃ for 30 seconds
through a protective resister (Rc=1kΩ) in 6 minutes per cycle. Surge voltage : 1.15 times of rated voltage
Characteristics of applied
The initial specified value or less
Within ±20% of initial value
150% or less of the initial specified value
150% or less of the initial specified value
Leakage current
Percentage of capacitance change
Tangent of the loss angle
ESR change
surge voltage
0.5% per 1000 hours maximum (Confidence level 60% at 105℃)
Failure tare
*Note : If any doubt arises, measure the leakage current after following voltage application treatment.
Voltage application treatment : DC rated voltage are applied to the capacitors for 120 minutes at 105℃.
Outline Drawing
Unit : mm
Part numbering system (example : 4V150µF)
PVX
Series code
—
4
Rated voltage
symbol
V
151
M
Rated capacitance
Capacitance
symbol
tolerance symbol
E60
Casing
symbol
E—
Taping
symbol
(C)
(P)
B±0.2
φD±0.5
(C)
A±0.2
0.4±0.2
0.3 max.
W
L±0.3
( ) : Reference size
φD
5
6.3
L
5.7
5.7
A
5.3
6.6
B
5.3
6.6
C
2.3
2.7
W
0.5 to 0.8
0.5 to 0.8
P
1.5
2.0
Casing symbol
E60
F60
Refer to individual page.
(Soldering conditions, Land pattern size, The taping specifications)
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
PVX
ALUMINUM ELECTROLYTIC CAPACITORS
ALUMINUM ELECTROLYTIC CAPACITORS
WITH CONDUCTIVE POLYMER
SOLID
ELECTROLYTE
WITH
CONDUCTIVE
POLYMER SOLID ELECTROLYTE
®
PVX
Standard Ratings
Rated voltage (V)
2.5
4
6.3
10
Case
ESR
Rated ripple current
Case
ESR
Rated ripple current
Case
ESR
Rated ripple current
Case
ESR
Rated ripple current
φD×L (mm)
(mΩ max.)
(mArms)
φD×L (mm)
(mΩ max.)
(mArms)
φD×L (mm)
(mΩ max.)
(mArms)
φD×L (mm)
(mΩ max.)
(mArms)
100
̶
̶
̶
̶
̶
̶
15
3100
5×5.7
15
3100
120
̶
̶
̶
̶
̶
̶
̶
̶
6.3×5.7
13
3300
Item
Rated
capacitance (µF)
5×5.7
̶
150
5×5.7
10
3800
5×5.7
10
3800
5×5.7
15
3100
̶
̶
̶
220
5×5.7
10
3800
5×5.7
10
3800
6.3×5.7
9
4000
̶
̶
̶
270
5×5.7
10
3800
̶
̶
̶
̶
̶
̶
̶
̶
̶
330
6.3×5.7
9
4000
6.3×5.7
4000
̶
̶
̶
̶
̶
̶
390
6.3×5.7
9
4000
̶
̶
̶
̶
̶
̶
̶
̶
9
̶
(Note) Rated ripple current : 105℃, 100kHz ; ESR : 20℃, 100kHz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
PVM
PVM
ALUMINUM
ELECTROLYTIC
CAPACITORS
ALUMINUM
ELECTROLYTIC
CAPACITORS
WITH
CONDUCTIVE
POLYMER
SOLID ELECTROLYTE
WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE
GREEN
CAP
Chip Type
●
●
SMD
Low
ESR
105˚C
2000hours
®
Anticleaning
solvent
Super low ESR and high ripple current are realized.
Guaranteed 105℃, 2000 hours.
High CV
Low ESR
PVM
PVH
Marking color : Blue print
Specifications
Performance
ー55 to +105
±20
Item
Category temperature range (℃)
Tolerance at rated capacitance (%)
Leakage current (µA)
(max.)
*Note
(20℃,120Hz)
0.2CV (after 2 minutes)
C : Rated capacitance (µF) , V : Rated voltage (V)
(20℃)
(20℃,120Hz)
0.12 or less
Tangent of the loss angle (tanδ)
Characteristics at high
and low temperature
Impedance ratio (max.)
Endurance (105℃)
(Applied ripple current)
Test time
Leakage current
Percentage of capacitance change
Tangent of the loss angle
ESR change
2000 hours
The initial specified value or less
Within ±20% of initial value
150% or less of the initial specified value
150% or less of the initial specified value
Bias Humidity
60℃, 90 to 95%RH
Test time
Leakage current
Percentage of capacitance change
Tangent of the loss angle
ESR change
500 hours
The initial specified value or less
Within ±20% of initial value
150% or less of the initial specified value
150% or less of the initial specified value
Z−25℃/Z+20℃
Z−55℃/Z+20℃
1.15
1.25
(100kHz)
The capacitors shall be subject to 1000 cycles each consisting of charge with the surge voltage specified at 105℃ for 30 seconds
through a protective resister (Rc=1kΩ) in 6 minutes per cycle. Surge voltage : 1.15 times of rated voltage
The initial specified value or less
Within ±20% of initial value
150% or less of the initial specified value
150% or less of the initial specified value
Leakage current
Percentage of capacitance change
Tangent of the loss angle
ESR change
Characteristics of applied
surge voltage
Failure tare
0.5% per 1000 hours maximum (Confidence level 60% at 105℃)
*Note : If any doubt arises, measure the leakage current after following voltage application treatment.
Voltage application treatment : DC rated voltage are applied to the capacitors for 120 minutes at 105℃.
Outline Drawing
Unit : mm
Part numbering system (example : 4V150µF)
PVM
Series code
̶
4
Rated voltage
symbol
V
151
M
Rated capacitance
Capacitance
symbol
tolerance symbol
E60
Casing
symbol
E ̶
Taping
symbol
(C)
(P)
B±0.2
φD±0.5
(C)
A±0.2
0.4±0.2
0.3 max.
W
L±0.3
( ) : Reference size
φD
5
6.3
L
5.7
5.7
A
5.3
6.6
B
5.3
6.6
C
2.3
2.7
W
0.5 to 0.8
0.5 to 0.8
P
1.5
2.0
Casing symbol
E60
F60
Refer to individual page.
(Soldering conditions, Land pattern size, The taping specifications)
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
PVM
®
ALUMINUM ELECTROLYTIC CAPACITORS
ALUMINUM ELECTROLYTIC CAPACITORS
WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE
WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE
PVM
Standard Ratings
Rated voltage (V)
Item
Rated
capacitance (µF)
2.5
Case
ESR
φD×L (mm) (mΩ max.)
4
Rated ripple current
Case
ESR
6.3
Rated ripple current
Case
ESR
(mArms) φD×L (mm) (mΩ max.) (mArms) φD×L (mm) (mΩ max.)
10
Rated ripple current
Case
ESR
16
Rated ripple current
Case
ESR
Rated ripple current
(mArms) φD×L (mm) (mΩ max.) (mArms) φD×L (mm) (mΩ max.) (mArms)
33
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
5×5.7
35
39
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
5×5.7
35
2070
47
̶
̶
̶
̶
̶
̶
̶
̶
̶
5×5.7
28
2310
6.3×5.7
28
2340
56
̶
̶
̶
̶
̶
̶
̶
̶
̶
5×5.7
28
2310
̶
̶
̶
68
̶
̶
̶
̶
̶
̶
̶
̶
̶
5×5.7
28
2310
6.3×5.7
28
2340
100
̶
̶
̶
22
2610
5×5.7
24
2500
6.3×5.7
25
2530
̶
̶
̶
120
̶
̶
̶
̶
̶
5×5.7
24
2500
6.3×5.7
25
2530
̶
̶
̶
150
̶
̶
̶
22
2610
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
5×5.7
22
2610
6.3×5.7
15
3160
̶
̶
̶
̶
̶
̶
180
5×5.7
21
2670
220
5×5.7
21
2670
5×5.7
̶
5×5.7
̶
2070
270
̶
̶
̶
6.3×5.7
15
3160
̶
̶
̶
̶
̶
̶
̶
̶
̶
330
6.3×5.7
15
3160
6.3×5.7
15
3160
̶
̶
̶
̶
̶
̶
̶
̶
̶
390
6.3×5.7
15
3160
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
(Note) Rated ripple current : 105℃, 100kHz ; ESR : 20℃, 100kHz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
PVK
PVK
ALUMINUM
ELECTROLYTIC
CAPACITORS
ALUMINUM
ELECTROLYTIC
CAPACITORS
WITH
CONDUCTIVE
POLYMER
SOLID ELECTROLYTE
WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE
GREEN
CAP
Chip Type
●
●
SMD
Low
ESR
125˚C
1000hours
®
Anticleaning
solvent
Super low ESR and high ripple current are realized.
Guaranteed 125℃, 1000 hours.
High temperature
PVK
PVH
Marking color : Blue print
Specifications
Performance
ー55 to +125
±20
Item
Category temperature range (℃)
Tolerance at rated capacitance (%)
Leakage current (µA)
(max.)
*Note
(20℃,120Hz)
0.2CV (after 2 minutes)
C : Rated capacitance (µF) , V : Rated voltage (V)
(20℃)
(20℃,120Hz)
0.12 or less
Tangent of the loss angle (tanδ)
Characteristics at high
and low temperature
Impedance ratio (max.)
Endurance (125℃)
(Applied ripple current)
Test time
Leakage current
Percentage of capacitance change
Tangent of the loss angle
ESR change
1000 hours
The initial specified value or less
Within ±20% of initial value
150% or less of the initial specified value
150% or less of the initial specified value
Bias Humidity
60℃, 90 to 95%RH
Test time
Leakage current
Percentage of capacitance change
Tangent of the loss angle
ESR change
500 hours
The initial specified value or less
Within ±20% of initial value
150% or less of the initial specified value
150% or less of the initial specified value
Z−25℃/Z+20℃
Z−55℃/Z+20℃
1.15
1.25
(100kHz)
The capacitors shall be subject to 1000 cycles each consisting of charge with the surge voltage specified at 125℃ for 30 seconds
through a protective resister (Rc=1kΩ) in 6 minutes per cycle. Surge voltage : 1.15 times of rated voltage
The initial specified value or less
Within ±20% of initial value
150% or less of the initial specified value
150% or less of the initial specified value
Leakage current
Percentage of capacitance change
Tangent of the loss angle
ESR change
Characteristics of applied
surge voltage
Failure tare
0.5% per 1000 hours maximum (Confidence level 60% at 125℃)
*Note : If any doubt arises, measure the leakage current after following voltage application treatment.
Voltage application treatment : DC rated voltage are applied to the capacitors for 120 minutes at 125℃.
Outline Drawing
Unit : mm
Part numbering system (example : 4V150µF)
PVK
Series code
̶
4
Rated voltage
symbol
V
151
M
Rated capacitance
Capacitance
symbol
tolerance symbol
F60 E ̶
Casing
symbol
Taping
symbol
(C)
(P)
B±0.2
φD±0.5
(C)
A±0.2
0.4±0.2
0.3 max.
W
L±0.3
( ) : Reference size
φD
6.3
L
5.7
A
6.6
B
6.6
C
2.7
W
0.5 to 0.8
P
2.0
Casing symbol
F60
Refer to individual page.
(Soldering conditions, Land pattern size, The taping specifications)
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
PVK
®
ALUMINUM ELECTROLYTIC CAPACITORS
ALUMINUM ELECTROLYTIC CAPACITORS
WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE
WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE
PVK
Standard Ratings
Rated voltage (V)
Item
Rated
capacitance (µF)
2.5
Case
ESR
φD×L (mm) (mΩ max.)
4
Rated ripple current
Case
ESR
6.3
Rated ripple current
Case
ESR
(mArms) φD×L (mm) (mΩ max.) (mArms) φD×L (mm) (mΩ max.)
10
Rated ripple current
Case
ESR
16
Rated ripple current
Case
ESR
Rated ripple current
(mArms) φD×L (mm) (mΩ max.) (mArms) φD×L (mm) (mΩ max.) (mArms)
33
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
6.3×5.7
37
590
39
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
6.3×5.7
37
590
47
̶
̶
̶
̶
̶
̶
̶
̶
̶
6.3×5.7
31
680
6.3×5.7
37
590
56
̶
̶
̶
̶
̶
̶
̶
̶
̶
6.3×5.7
31
680
̶
̶
̶
68
̶
̶
̶
̶
̶
̶
6.3×5.7
27
720
̶
̶
̶
̶
̶
̶
82
̶
̶
̶
̶
̶
̶
6.3×5.7
27
720
̶
̶
̶
̶
̶
̶
100
̶
̶
̶
6.3×5.7
26
770
6.3×5.7
27
720
̶
̶
̶
̶
̶
̶
120
̶
̶
̶
̶
̶
̶
6.3×5.7
27
720
̶
̶
̶
̶
̶
̶
150
̶
̶
̶
6.3×5.7
26
770
̶
̶
̶
̶
̶
̶
̶
̶
̶
220
6.3×5.7
25
770
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
(Note) Rated ripple current : 125℃, 100kHz ; ESR : 20℃, 100kHz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
ALUMINUM ELECTROLYTIC CAPACITORS
Aluminum Electrolytic Capacitors
AAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
(Chip Type, Miniature Type, Large Type, For Audio)
CAT.No.2021/2022
ALUMINUM ELECTROLYTIC
ELECTROLYTIC CAPACITORS
CAPACITORS
®
Cautions for Using Aluminum Electrolytic Capacitors
Please read the specification before using ELNA products.
The following cautions should be observed when using our aluminum electrolytic capacitors to assure their maximum
stability and performance. When your application design conditions or operating conditions exceed the limit of the
product specification, please contact us. If used under conditions beyond the limit of our specifications, it may cause
defects such as short circuit, open circuit, leakage, explosion or combustion.
Cautions for usage
1. DC electrolytic capacitors are polarized.
• If used with a wrong polarity, it creates an abnormal
current resulting in a short circuit or damage to
itself. Use DC bipolar electrolytic capacitors for use
with uncertain or unknown polarity. DC capacitors
cannot be used in AC circuits.
2. Use within the rated voltage.
• If a voltage exceeding the rated voltage is applied,
it may cause characteristic deterioration or damage
due to the increased leakage current.
• When ripple current is loaded, make sure that the
peak value of the ripple voltage does not exceed
the rated voltage.
3. Using for power supply circuit.
• While aluminum electrolytic capacitors are operated
electrolyte liquid inside dries up and E.S.R.
(Equivalent Series Resistance) of the capacitor
increases. In case operated longer than rated life
time, the capacitance much decreases, tangent of
loss angle and E.S.R. much increases. Therefore
for some case the sum of bias direct voltage and
the peak of ripple voltage is over the rated voltage
of the capacitor.
• For any type of circuit, in case the sum of bias
direct voltage and the peak of ripple voltage is over
the rated voltage of the capacitors or in case the
minimum voltage is lower than 0 (zero) volt, the
voltage control for the capacitors shall be provided.
4. Do not use in a circuit which requires rapid
charging or discharging.
• If used in a circuit requiring rapid charging or discharging, it may cause characteristic deterioration
or damage to itself due to the heat generated inside
the capacitor. In such cases, contact us for our
rapid charging / discharging capacitors.
5. Use within the rated ripple current.
• If applied ripple current exceeds rated ripple current,
the life of the capacitor may be shortened, or in an
extreme case it gets destroyed due to its internal heat.
Use high-ripple type capacitors for such circuits.
6. Changes in characteristics due to operating
temperature.
• The characteristics of an electrolytic capacitor will
change with a change in the temperature. Such
changes are temporary and the original characteristics will be restored at the original temperature (if
the characteristics are not deteriorated by remaining
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
at a high temperature for a long time). If used at a
temperature exceeding the guaranteed temperature
range, the capacitor may be damaged due to the
increased leakage current. Pay attention to the
capacitor temperature being affected by the ambient
temperature of the unit, the temperature inside the
appliance, the heat radiated by another hot component
in the unit and the heat inside the capacitor itself due
to the ripple current.
(1)The electrostatic capacitance is normally shown
as the value at 20°C-120Hz. It increases as the
temperature raises and decreases as it lowers.
(2)The tangent of loss angle (tanδ) is normally
shown as the value at 20°C-120Hz. It decreases
as the ambient temperature gets high and
increases as it gets low.
(3)The leakage current increases as the temperature gets high and decreases as it gets low.
7. Changes in the characteristics due to frequency.
• The characteristics of an electrolytic capacitor will
change according to the change in the operating
frequency.
(1)The electrostatic capacity is normally shown as
the value at 20°C-120Hz. It decreases as the
frequency increases.
(2)The tangent of loss angle (tanδ) is normally
shown as the value at 20°C-120Hz. It increases
as the frequency gets high.
(3)The impedance is normally shown as the value at
100kHz 20°C. It increases as the frequency lowers.
8. Aluminum electrolytic capacitor life.
• The life of an aluminum electrolytic capacitor terminates when it fails due to the deterioration in its
electronic characteristics. Temperature and the
ripple current since they especially affect the life.
See chart on page.
9. Changes in aluminum electrolytic capacitors
during storage.
• After storage for a long period, whether unused of
mounted on the appliance, the leakage current of
an aluminum electrolytic capacitor will increase.
This tendency is more prominent when the ambient
temperature is high. If a capacitor has been stored
for more than 2 years under normal temperature
(shorter if high temperature) and it shows increased
leakage current, a treatment by voltage application
is recommended. Addition of a protective circuit in
the design of the appliance is also recommended,
considering the effect of the initial increased current.
CAT.No.2021/2022E
®
ALUMINUM ELECTROLYTIC
CAPACITORS
10. Insulation between the capacitor case and the
cathode terminal.
• The capacitor case and the cathode terminal are
connected through the electrolyte which has
uncertain resistance. If a complete insulation of the
case is necessary, add an insulator at assembly.
11. NC terminal (the supplemental terminal)
(series RPK, LJ6, LJ2)
• Since NC terminal is not insulated. It should be
mounted at a position electronically independent
from all other parts of the circuit.
12. External sleeve
• During a preheating or a hardening of mounting
adhesive may cause a sleeve cracked.
The capacitors are usually sleeved with poly vinyl
chloride or poly ethylene terephthalate for the
indication purpose only. Please do not consider it
as an insulation.
13. Fumigation Process
• When exporting electronic equipment abroad,
fumigation process may be performed on wooden
packaging material with a halogen (compound) gas
such as methyl bromide. Exercise care as this
halogen gas may corrode capacitors. Also, use
caution to epidemic preventive agent as corrosive
component such as halogen may be contained.
14. Specific Operating Environments
• Capacitors may corrode when stored or used in a
place filled with acidic toxic gases (such as
hydrogen sulfide, sulfurous acid, nitrous acid,
chlorine, bromine, methyl bromide, etc.)
If capacitors are used or stored in such
environments, please let us know.
15. Use at a high altitude
• The use of capacitors at high altitudes such as on
an airplane causes a large difference between the
internal pressure of the capacitors and the atmospheric pressure. However, there is no problem in
use under atmospheric pressure up to about an
altitude of 10,000 meters. Please check the
operation of electronic equipment at the operating
environmental temperature because the temperature lowers with increased altitude.
If the condition is severe like space, please contact
us.
16. Hole pitch adjustment of the PCB to the
capacitors.
• Set the hole pitch of the PCB to the lead pitch (the
“F” distance in the catalog) of the capacitor. Be careful since a short circuit, a cut or an increase in the
leakage current etc. may be caused by the stress
given to the lead wire terminals due to the difference
between the hole pitch and the lead pitch.
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
ALUMINUM ELECTROLYTIC CAPACITORS
17. Capacitors with pressure valves.
• A part of the capacitor case is made thin to have
the function as the pressure valve in order to prevent explosion due to the rise of inside pressure
when a reverse or excessive voltage is applied to
the capacitor. Once it has worked as a valve, the
whole capacitor needs to be replaced since the
valve will not restore.
• When you use a capacitor with pressure valve,
provide certain space above the pressure valve as
below to prevent an interference when it works as
a valve.
Diameter of the capacitor
(mm)
18 or less
20 to 40
Required space
above the valve (mm)
2.0
or more
3.0
or more
18. Double-sided PCB’s
• When you use electrolytic capacitors on a double
sided PCB, be careful not to have the circuit pattern
run under where the capacitor is mounted.
Otherwise it may cause a short circuit on the PCB
depending on the condition of mounting.
19. Regarding to connection of capacitors
• Aluminum electrolytic capacitor has electrolyte liquid
so that the most portion of electric loss
characteristics came from E.S.R(Equivalent Series
Resistance) of electrolyte liquid. Therefore the
capacitor is an electronic devise which can flow high
ripple current in case the temperature increases and
it decreases E.S.R.
In case connecting two capacitors or more, E.S.R. of
the capacitors is close to the resistance of the circuit.
Therefore in case current is unbalanced and some
capacitors has high ripple current, temperature
increase, it makes more high current and finally it is
over the rated ripple current.
For parallel connection of capacitors the proper
design of electric circuit such as balancing of each
capacitors resistance or control of total ripple current
shall be provided to avoid excess ripple current and
voltage.
• When two or more capacitors are arranged in
series, the voltage given to each capacitors shall
be kept below the rated voltage level, by also giving
consideration to the balance of the voltage
impressed on the capacitors. Further, partial
pressure resistor which considers leakage current
shall be provided parallel to each condenser not to
have over-voltage impressed on.
Balance resistance are explained on p.106 of our
Catalog.
CAT.No.2021/2022E
ALUMINUM ELECTROLYTIC
ELECTROLYTIC CAPACITORS
CAPACITORS
■ Cautions for Mounting
1. Cautions for mounting.
• Check the ratings (electrostatic capacitance and
rated voltage) of the capacitor before mounting.
• Transient recovery voltage may be generated in the
capacitor due to dielectric absorption. If required,
this voltage can be discharged with a resistor with a
value of about 1 kΩ.
• Check the polarity of the capacitor to the chassis.
• Do not drop the capacitor to the floor. Do not use the
dropped capacitor.
• Do not deform the capacitor for mounting.
2. Do not apply excessive pressure to the capacitor, its terminals or lead wires.
• Make sure that the contact path of the capacitor
meets the hole pitch of the PCB before mounting.
• A PCB self-standing (snap-in) type capacitor should
be pushed to the end (till there is no space) to the
PCB for mounting.
• Do not set the automatic insertion machine to clinch
the capacitor lead wires too strong.
• Pay attention to the impact given by the component
receptacles of the automatic insertion/mounting
machines and the product checker, and from the
centering operation.
3. Soldering.
• Do not dip the capacitor into melted solder.
• The soldering conditions
About detail conditions are described in the catalog
or product specification.
• Do not flux other part than the terminals.
• If there is a direct contact between the sleeve of the
capacitor and the printed circuit pattern or a metal
part of another component such as a lead wire, it
may cause shrinkage of crack.
• When you use the capacitor with its sleeve touching
directly to the PCB, excessive solder temperature or
excessive soldering time may cause the sleeve to
shrink or crack during the heat.
• If the application is for extended use, understand and
manage the soldering characteristics to avoid
abnormal current caused by a contact failure
between the capacitor and the PCB.
4. Handling after soldering
• After soldering, do not tilt, push down or twist the
capacitor.
• After soldering, do not hold the capacitor as a handle
to carry the PCB.
• After soldering, do not hit the capacitor with any
obstacle. If PCB’s are piled up for storage, the
capacitor should not touch another PCB or component.
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
®
5. Cleaning after Soldering
• Recommended cleaning method
(1)cleaning solutions:
(a) CLEANTHROUGH 710M, 750H, 750L
(b) PINEALPHA ST-100S
(c) Techno Care FRW-4~17
(d) Isopropyl alcohol (2-propanol)
(2)Cleaning conditions:
(a) The temperature of cleaning solution shall be
less than 60°C.
(b) Use immersion or ultrasonic waves within two
minutes.
(c) After cleaning, capacitors and PCB’s shall
thoroughly be rinsed and dried with hot blast
for more than 10 minutes. The temperature of
such breeze should be less than the upper
category temperature.
(d) After cleaning, do not keep capacitors in cleaning solution atmosphere or airtight containers.
• During cleaning, control the cleaning solution against
contamination.
6. Fixing adhesives and coating materials.
• Do not use fixing adhesive or coating material
containing halogen-based solvent.
• Before applying the fixing adhesive or the coating
material, make sure that there is no remaining flux or
stains between the PCB and the sealed part of the
capacitor.
• Before applying the fixing adhesive or the coating
material, make sure that the detergent etc. has dried
up.
• Do not cover the whole surface of the sealed part
(terminal side) of the capacitor with the fixing adhesive or the coating material.
• Observe the description in the catalog or the product
specifications concerning the thermal stiffening
conditions of the fixing adhesive or the coating
material. (If there is no such description, contact us.)
When both discrete and SMT components are on
the same PCB, the fixing material for the SMT
components may cause crack, tear or shrinkage on
the external sleeve depending on the thermal stiffening condition.
• Recommended fixing adhesives and coating materials
Fixing adhesives : Cemedine 1500, Diabond
DN83K, Bond G103
Coating materials : Taffy TF1159, HumiSeal
1B66NS, 1A27NS
CAT.No.2021/2022E
®
ALUMINUM ELECTROLYTIC
CAPACITORS
■ Other Cautions
1. Do not touch capacitor terminals with bare hands.
You may get electric shock or your hand may be burnt.
Discharge it with a 1 KΩ resistance before use if necessary.
2. Do not short the capacitor terminals with a
conductor.
Do not spill conductive solution including acid or
alkaline solution on the capacitor.
3. Periodical Inspections should be established for
the capacitors in industrial appliances.
• The following items should be checked:
(1)Appearance : Check if there is any open valve or
leakage.
(2)Electronic performance : Check the leakage
current, the electrostatic capacitance, the tangent
of loss angle and other items described in the
catalog or the product specifications.
4. Take the following measures in case of emergency.
• If you see gas coming out of the capacitor valve
when the set is in operation, turn off the power
switch of the unit or unplug the power cord from the
outlet.
• Keep your face away from the capacitor pressure
valve, since the high temperature gas at over 100°C
bursts out when the valve works. If the gas gets into
your eyes or your mouth, wash your eyes or your
mouth. Do not ingest the capacitor electrolyte. If the
electrolyte gets on your skin, wash it out with soap.
ALUMINUM ELECTROLYTIC CAPACITORS
5. Storing conditions.
• Avoid high temperature or high humidity when
storing capacitors. Keep the storing temperature at
5℃ to 35℃ and the relative humidity not more than
75%.
• The leakage current of an aluminum electrolytic
capacitor tends to increase when stored for a long
time. This tendency becomes more prominent if the
ambient temperature is high. The leakage current
will be decreased by voltage application. If necessary, treatment by voltage application should be
made on the capacitors which have been stored for
a long period (more than 2 years after production).
• Do not store capacitors at a place where there is a
possibility that they may get water, salt or oil spill.
• Do not store capacitors at a place where the air
contains dense hazardous gas (hydrogen sulfide,
sulfurous acid, nitrous acid, chlorine, ammonia,
etc.).
• Fumigation treatment with toxic gas covering the
whole wooden container frames as moth proofing
during shipment may leave residual toxic gas.
• Do not store capacitors at a place where it gets ultraviolet or radioactive rays.
6. Disposing of capacitors.
• Punch a hole or crush the capacitors (to prevent
explosion) before incineration at approved facility.
• If they are not to be incinerated, bring them to a
professional industrial waste disposal company.
7. Other notes.
• Please refer to the following literature for anything
not described in the specification or the catalog.
(Technical report of Japan Electronics and Information
Technology Industries Association, EIAJ RCR-2367
“Guideline of notabilia for fixed aluminum electrolytic
capacitors for use in electronic equipment”)
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
CHIP TYPE ALUMINUM ELECTROLYTIC CAPACITORS
AAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
Chip Type Aluminum Electrolytic Capacitors
CAT.No.2021/2022
RV5
RV5
VERTICAL
ELECTROLYTIC
CAPACITORS
VERTICALCHIP
CHIPTYPE
TYPEALUMINUM
ALUMINUM
ELECTROLYTIC
CAPACITORS
GREEN
CAP
Chip Type 85˚C High CV Capacitors
●
●
●
®
Anticleaning
solvent
SMD
Compatible with surface mounting.
Supplied with carrier taping.
Guarantees 2000 hours at 85°
C.
High CV
RV5
RV3
Marking color : Black print
Specifications
Performance
ー40 to +85
±20
Item
Category temperature range (℃)
Tolerance at rated capacitance (%)
Leakage current (µA)
(max.)
(20℃,120Hz)
0.01CV or 3 whichever is larger (after 2 minutes) C : Rated capacitance (µF) ; V : Rated voltage (V)
Rated voltage (V)
tanδ (max.)
Tangent of loss angle
(tanδ)
4
6.3
10
16
25
35
Refer to following page.
50
(20℃)
63
100
(20℃,120Hz)
Rated voltage (V)
Z−25℃/Z+20℃
Z−40℃/Z+20℃
Characteristics at high
and low temperature
4
7
17
Impedance ratio (max.)
6.3
4
10
10
3
8
16
2
6
25
2
4
35
2
3
50
2
3
63
2
3
100
2
3
(120Hz)
Test time
Leakage current
Percentage of capacitance change
Tangent of the loss angle
Endurance (85℃)
(Applied ripple current)
2000 hours
The initial specified value or less
Within ±30% of initial value
200% or less of the initial specified value
Shelf life (85℃)
Test time : 1000hours ; other items are same as the endurance. Voltage application treatment : According to JIS C5101-4 4.1
Applicable standards
JIS C5101 - 1,- 18 (IEC 60384 - 1,- 18)
Outline Drawing
Unit : mm
Coefficient of Frequency for Rated Ripple Current
Frequency (Hz)
0.3 max.
(C)
(C)
(P)
B±0.2
φD±0.5
W
L
( ) : Reference size
A
B
φD
L
4
5.3±0.2 4.3 4.3
5
5.3±0.2 5.3 5.3
6.3
5.3±0.2 6.3 6.3
6.3
7.7±0.3 6.6 6.6
8
6.5±0.3 8.4 8.4
8
10±0.5 8.4 8.4
10
10±0.5 10.4 10.4
12.5 13.5±0.5 13.0 13.0
C
2.0
2.3
2.7
2.7
3.4
3.0
3.3
4.9
M
0.4±0.2
0.4±0.2
0.4±0.2
0.4±0.2
0.4±0.2
0.4±0.2
0.4±0.2
0.7±0.3
W
0.5 to 0.8
0.5 to 0.8
0.5 to 0.8
0.5 to 0.8
0.5 to 0.8
0.7 to 1.1
0.7 to 1.1
1.0 to 1.4
P Casing symbol
D55
1.0
E55
1.5
F55
2.0
F80
2.0
G68
2.3
G10
3.1
H10
4.7
4.6
ⅠE
Refer to individual page.
(Soldering conditions, Land pattern size, The taping specifications)
50・60
120
1k
10k・100k
0.80
0.80
0.80
0.70
1
1
1
1
1.15
1.25
1.35
1.35
1.25
1.40
1.50
1.50
4 to 16
25 to 35
50 to 63
100
M
Vent (φ10 or more)
Rated voltage (V)
A±0.2
Part numbering system
φ8 or less(example : 16V470µF)
RV5
̶
16
V
Rated voltage
symbol
Series code
471
M
Rated capacitance
Capacitance
symbol
tolerance symbol
G10
U ̶
Casing
symbol
Taping
symbol
φ10(example : 16V470µF)
RV5
̶
16
V
Rated voltage
symbol
Series code
471
M
Rated capacitance
Capacitance
symbol
tolerance symbol
H10 EU ̶
Taping
symbol
Casing
symbol
φ12.5
(example : 10V1500µF)
RV5
Series code
̶
10
Rated voltage
symbol
V
152
M
Rated capacitance
Capacitance
symbol
tolerance symbol
ⅠE
Casing
symbol
T ̶
R5
Taping
symbol
*φ10 product have sleeve type (white print on a brown sleeve), but old type product.
Please inquire for sleeve type P/N. However, we don't accept new orders.
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
RV5
VERTICAL CHIP TYPE ALUMINUM ELECTROLYTIC CAPACITORS
Standard Ratings
4
Rated voltage(V)
Item
Rated
capacitance(µF)
Case
φD×L (mm)
Casing
symbol
tanδ
Rated ripple
current
-
-
-
-
22
-
-
-
-
33
4×5.3
D55
0.42
31
47
4×5.3
D55
0.42
37
5×5.3
150
-
220
6.3×5.3
E55
0.42
63
-
-
-
F55
0.42
110
330
-
-
-
-
470
-
-
-
-
680
820
1000
1500
2200
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Item
Rated
capacitance(µF)
1
2.2
3.3
4.7
10
22
Case
tanδ
-
-
-
-
-
-
-
-
-
4×5.3
D55
0.12
20
4×5.3
5×5.3
5×5.3
6.3×5.3
D55
E55
E55
F55
0.14
0.12
0.14
0.12
27
34
47
59
φD×L (mm)
-
-
4×5.3
D55
0.28
4×5.3
5×5.3
4×5.3
5×5.3
5×5.3
6.3×5.3
D55
E55
D55
E55
E55
F55
0.35
0.28
0.35
0.28
0.35
0.28
-
-
-
tanδ
4×5.3
D55
0.24
23
31
4×5.3
D55
0.24
26
28
44
34
52
58
89
4×5.3
5×5.3
4×5.3
5×5.3
5×5.3
6.3×5.3
6.3×5.3
6.3×7.7
6.3×7.7
8×6.5
D55
E55
D55
E55
E55
F55
F55
F80
F80
G68
0.32
0.24
0.32
0.32
0.32
0.24
0.32
0.32
0.32
0.32
32
48
33
54
54
98
79
98
173
175
(mArms) φD×L (mm)
6.3×5.3
F55
0.35
83
F55
F80
F80
G68
0.35
0.35
0.35
0.35
88
113
188
190
8×10
G10
0.28
262
-
-
8×10
G10
10×10
H10
10×10
H10
12.5×13.5 ⅠE
-
0.35
0.28
0.35
0.30
-
320
458
489
651
Case
6.3×5.3
F55
0.14
67
47
F55
F80
0.14
0.14
54
90
100
6.3×7.7
F80
0.14
120
8×10
G10
10×10
H10
10×10
H10
12.5×13.5 ⅠE
0.14
0.12
0.14
0.12
260
458
360
451
Rated ripple
current
Casing
symbol
6.3×5.3
6.3×7.7
6.3×7.7
8×6.5
16
Case
(mArms) φD×L (mm)
8×10
G10
0.24
230
8×10
G10
0.32
310
-
-
-
-
10×10
H10
12.5×13.5 ⅠE
-
-
-
-
0.24
0.24
-
4×5.3
4×5.3
5×5.3
4×5.3
5×5.3
5×5.3
6.3×5.3
6.3×5.3
Case
tanδ
4×5.3
4×5.3
4×5.3
4×5.3
5×5.3
5×5.3
6.3×5.3
D55
D55
D55
D55
E55
E55
F55
0.10
0.10
0.10
0.12
0.10
0.12
0.10
10
15
19
20
26
34
44
6.3×5.3
F55
0.12
47
6.3×7.7
8×6.5
6.3×7.7
8×10
8×10
10×10
F80
G68
F80
G10
G10
H10
0.12
0.12
0.12
0.10
0.12
0.10
82
83
85
252
252
458
8×10
G10
8×10
10×10
G10
H10
10×10
H10
tanδ
D55
D55
E55
D55
E55
E55
F55
0.20
0.28
0.20
0.28
0.28
0.28
0.20
F55
0.20
Rated ripple
current
25
Case
(mArms) φD×L (mm)
26
30
44
32
44
52
75
4×5.3
4×5.3
5×5.3
5×5.3
6.3×5.3
Casing
symbol
tanδ
D55
D55
E55
E55
F55
0.18
0.18
0.18
0.18
0.14
Rated ripple
current
(mArms)
23
24
43
54
67
6.3×5.3
F55
0.18
75
70
6.3×7.7
8×6.5
F80
G68
0.18
0.18
124
118
6.3×7.7
F80
0.28
109
-
-
-
-
F80
G10
0.28
0.20
162
220
8×10
G10
0.14
252
8×10
10×10
G10
H10
0.18
0.14
300
458
10×10
H10
0.14
458
-
12.5×13.5
-
-
-
-
ⅠE
-
-
-
-
0.14
-
-
-
-
552
-
-
-
8×10
G10
0.20
260
-
-
454
560
-
8×10
10×10
10×10
-
12.5×13.5
-
-
G10
H10
H10
-
ⅠE
-
-
0.28
0.20
0.28
-
0.20
-
-
307
458
380
-
521
-
-
Rated ripple
current
Case
100
Casing
symbol
tanδ
-
-
4×5.3
-
-
D55
-
-
0.12
-
-
12
5×5.3
E55
0.12
6.3×5.3
F55
6.3×7.7
8×6.5
F80
G68
(mArms) φD×L (mm)
Casing
symbol
6.3×7.7
8×10
63
Rated ripple
current
Casing
symbol
(mArms) φD×L (mm)
6.3×5.3
6.3×7.7
330
470
-
-
10
Case
50
Rated ripple
current
Casing
symbol
33
220
tanδ
35
Rated voltage(V)
Rated ripple
current
Casing
symbol
(mArms) φD×L (mm)
10
100
6.3
Case
Rated ripple
current
Casing
symbol
tanδ
-
-
-
-
-
-
-
-
-
-
-
-
20
-
-
-
-
0.12
32
8×10
G10
0.10
94
0.12
0.12
60
62
8×10
G10
0.12
94
0.10
139
8×10
10×10
G10
H10
0.12
0.10
94
189
0.10
0.12
139
226
10×10
H10
0.12
189
0.10
226
12.5×13.5
ⅠE
0.10
242
(mArms) φD×L (mm)
(mArms)
-
-
-
-
12.5×13.5
ⅠE
0.10
343
-
-
-
-
12.5×13.5
-
ⅠE
-
0.10
-
451
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
(Note) Rated ripple current : 85°C, 120Hz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
RV4
®
VERTICAL CHIPVERTICAL
TYPE ALUMINUM
ELECTROLYTIC
CAPACITORS CAPACITORS
CHIP TYPE
ALUMINUM ELECTROLYTIC
Chip Type 85°C Capacitors (height:4.5mm)
●
●
●
GREEN
CAP
RV4
Anticleaning
solvent
SMD
Compatible with surface mounting for 4.5mm height capacitors.
Supplied with carrier taping.
Guarantees 2000 hours at 85℃.
RV4
Low Profile
RV2
Marking color : Black print
Specifications
Performance
Item
ー40 to +85
±20
Category temperature range (℃)
Tolerance at rated capacitance (%)
Leakage current (µA)
(max.)
(20°
C,120Hz)
0.01CV or 3 whichever is larger (after 2 minutes) C : Rated capacitance (µF) ; V : Rated voltage (V)
Rated voltage (V)
tanδ (max.)
Tangent of loss angle
(tanδ)
(20°
C)
6.3
0.30
10
0.24
16
0.19
25
0.16
35
0.14
50
0.12
6.3
4
8
10
3
8
16
2
4
25
2
4
35
2
3
50
2
3
(20°
C,120Hz)
Rated voltage (V)
Zー25℃/Z+20℃
Impedance ratio (max.)
Zー40℃/Z+20℃
Characteristics at high
and low temperature
(120Hz)
Test time
Leakage current
Percentage of capacitance change
Tangent of the loss angle
Endurance (85℃)
(Applied ripple current)
2000 hours
The initial specified value or less
Within ±20% of initial value
300% or less of the initial specified value
Shelf life (85℃)
Test time : 1000hours ; other items are same as the endurance. Voltage application treatment : According to JIS C5101-4 4.1
Applicable standards
JIS C5101 - 1,- 18 (IEC 60384 - 1,- 18)
Outline Drawing
Coefficient of Frequency for Rated Ripple Current
Unit : mm
Frequency (Hz)
Rated voltage (V)
6.3 to 16
25 to 35
50
(P)
B±0.2
φD±0.5
(C)
A±0.2
0.4±0.2
0.3 max.
(C)
RV4
( ) : Reference size
φD
6.3
L
4.5 +0.1
−0.2
120
1k
10k・100k
0.80
0.70
0.70
1
1
1
1.15
1.25
1.35
1.25
1.40
1.50
Part numbering system (example : 6.3V100µF)
W
L
50・60
A
B
C
W
P
Casing symbol
6.6
6.6
2.7
0.5 to 0.8
2.0
F46
̶
6
V
Rated voltage
symbol
Series code
101
M
F46 U ̶
Rated capacitance
Capacitance
symbol
tolerance symbol
Casing
symbol
Taping
symbol
Refer to individual page.
(Soldering conditions, Land pattern size, The taping specifications)
Standard Ratings
Rated voltage (V)
6.3
Rated
Case
φD(mm)
6.3
Case
symbol
F46
Item capacitance
(μF)
100
ESR
10
Rated ripple
current
Rated
capacitance
(Ω) (mArms)(μF)
5
76
47
ESR
16
Rated ripple
current
Rated
capacitance
(Ω) (mArms)(μF)
8
59
ESR
25
Rated ripple
current
Rated
capacitance
ESR
35
Rated ripple
current
Rated
capacitance
(Ω) (mArms)(μF)
(Ω) (mArms)(μF)
33
10
55
22
12
49
47
7
76
33
8
60
22
ESR
50
Rated ripple
current
Rated
capacitance
ESR
Rated ripple
current
(Ω) (mArms)(μF)
(Ω) (mArms)
11
20
52
10
35
(Note) Rated ripple current : 85℃ , 120Hz ; ESR : 20℃ , 120Hz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
RVB
RVB
VERTICAL
ELECTROLYTIC
CAPACITORS
VERTICALCHIP
CHIPTYPE
TYPEALUMINUM
ALUMINUM
ELECTROLYTIC
CAPACITORS
GREEN
CAP
Chip Type Bipolar Capacitors (height:5.5mm)
●
●
●
SMD
®
Anticleaning
solvent
Compatible with surface mounting for 5.5mm height capacitors.
Supplied with carrier taping.
Guarantees 2000 hours at 85℃.
Bipolar
RVB
RV2
Marking color : Black print
Specifications
Performance
ー40 to +85
±20
Item
Category temperature range (℃)
Tolerance at rated capacitance (%)
Leakage current (µA)
(max.)
(20℃,120Hz)
0.01CV or 3 whichever is larger (after 2 minutes) C : Rated capacitance (µF) ; V : Rated voltage (V)
Rated voltage (V)
Tangent of loss angle
(tanδ)
6.3
0.35
0.30
φ4
φ5, 6.3
tanδ (max.)
10
0.30
0.25
16
0.25
0.20
25
0.25
0.15
(20℃)
35
0.25
0.15
50
0.25
0.15
(20℃,120Hz)
Rated voltage (V)
Z−25℃/Z+20℃
Z−40℃/Z+20℃
Characteristics at high
and low temperature
6.3
3
8
Impedance ratio (max.)
10
3
5
16
2
4
25
2
3
35
2
3
50
2
3
(120Hz)
2000 hours (with the polarity inverted every 250 hours)
The initial specified value or less
Within ±20% of initial value
200% or less of the initial specified value
Test time
Leakage current
Percentage of capacitance change
Tangent of the loss angle
Endurance (85℃)
(Applied ripple current)
Test time : 1000hours ; other items are same as the endurance. Voltage application treatment : According to JIS C5101-4 4.1
Shelf life (85℃)
JIS C5101 - 1,- 18 (IEC 60384 - 1,- 18)
Applicable standards
Outline Drawing
0.3 max.
Coefficient of Frequency for Rated Ripple Current
Frequency (Hz)
Rated voltage (V)
50・60
120
1k
10k・100k
6.3 to 16
25 to 35
50
0.80
0.80
0.80
1
1
1
1.15
1.25
1.35
1.25
1.40
1.50
(P)
B±0.2
φD±0.5
(C)
A±0.2
0.4±0.2
Unit : mm
(C)
Part numbering system (example : 6.3V47µF)
RVB
W
L
( ) : Reference size
φD
4
5
6.3
L
5.3±0.2
5.3±0.2
5.3±0.2
A
4.3
5.3
6.6
B
4.3
5.3
6.6
C
2.0
2.3
2.7
W
0.5 to 0.8
0.5 to 0.8
0.5 to 0.8
Series code
—
6
Rated voltage
symbol
V
U
470
M
Rated capacitance
symbol
Capacitance
tolerance symbol
—
Taping
symbol
P
1.0
1.5
2.0
Refer to individual page.
(Soldering conditions, Land pattern size, The taping specifications)
Standard Ratings
Rated voltage (V)
Rated
capacitance (µF)
Item
Case
φD(mm)
̶
̶
̶
̶
̶
6.3
ESR
(Ω)
̶
̶
̶
̶
̶
Rated ripple
current
Case
(mArms) φD(mm)
̶
̶
̶
̶
̶
̶
̶
̶
̶
4
6.3
27
45
6.3
̶
54
10
ESR
(Ω)
̶
̶
̶
̶
1
2.2
3.3
4.7
50
10
5
23
19
22
6.3
15
13
33
̶
6.3
11
47
(Note) Rated ripple current : 85°
C, 120Hz ; ESR : 20°
C, 120Hz
Rated ripple
current
Case
(mArms) φD(mm)
̶
̶
̶
̶
̶
̶
̶
4
18
5
40
6.3
50
6.3
̶
̶
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
16
ESR
(Ω)
̶
̶
̶
88
33
15
10
̶
Rated ripple
current
Case
(mArms) φD(mm)
̶
̶
̶
̶
̶
4
14
5
26
6.3
̶
45
̶
55
̶
̶
25
ESR
(Ω)
̶
̶
101
53
25
̶
̶
̶
Rated ripple
current
Case
(mArms) φD(mm)
̶
̶
̶
4
5
13
5
20
6.3
35
̶
̶
̶
̶
̶
̶
35
ESR
(Ω)
̶
151
75
53
25
̶
̶
̶
Rated ripple
current
Case
(mArms) φD(mm)
̶
4
5
10
5
17
6.3
21
̶
35
̶
̶
̶
̶
̶
̶
50
ESR
(Ω)
332
113
75
53
̶
̶
̶
̶
Rated ripple
current
(mArms)
7.2
14
17
24
̶
̶
̶
̶
CAT.No.2021/2022E
RVS
RVS
VERTICAL
CHIP
TYPE
ALUMINUM
ELECTROLYTIC
CAPACITORS
VERTICAL
CHIP
TYPE
ALUMINUM
ELECTROLYTIC
CAPACITORS
GREEN
CAP
Chip Type 105°C Standard Capacitors
●
●
●
Compatible with surface mounting.
Supplied with carrier taping.
Guarantees 1000 hours at 105°
C.
SMD
105˚C
1000hours
®
Anticleaning
solvent
RVS
High temperature
RV2
Marking color : Black print
Specifications
Item
Performance
ー55 to +105
±20
Category temperature range (℃)
Tolerance at rated capacitance (%)
Leakage current (µA)
(max.)
(20℃,120Hz)
0.01CV or 3 whichever is larger (after 2 minutes) C : Rated capacitance (µF) ; V : Rated voltage (V)
Rated voltage (V)
tanδ (max.)
Tangent of loss angle
(tanδ)
6.3
0.30
10
0.26
16
0.22
25
0.16
(20℃)
35
0.13
50
0.12
(20℃,120Hz)
Rated voltage (V)
Zー25℃/Z+20℃
Zー40℃/Z+20℃
Characteristics at high
and low temperature
6.3
4
8
Impedance ratio (max.)
10
3
5
16
2
4
25
2
3
35
2
3
50
2
3
(120Hz)
1000 hours
The initial specified value or less
Within ±20% of initial value
200% or less of the initial specified value
Test time
Leakage current
Percentage of capacitance change
Tangent of the loss angle
Endurance (105℃)
(Applied ripple current)
Shelf life (105℃)
Test time : 1000hours ; other items are same as the endurance. Voltage application treatment : According to JIS C5101-4 4.1
Applicable standards
JIS C5101 - 1,- 18 (IEC 60384 - 1,- 18)
Outline Drawing
Unit : mm
Frequency (Hz)
Rated voltage (V)
(C)
(P)
B±0.2
φD±0.5
W
L
( ) : Reference size
φD
4
5
6.3
6.3
8
8
10
10
6.3 to 16
25 to 35
50
(C)
A±0.2
0.4±0.2
0.3 max.
Inner vent (φ10 only)
Coefficient of Frequency for Rated Ripple Current
L
A
B
C
5.3±0.2
5.3±0.2
5.3±0.2
7.7±0.3
6.5±0.3
10±0.5
10±0.5
10.5±0.5
4.3
5.3
6.6
6.6
8.4
8.4
10.4
10.4
4.3
5.3
6.6
6.6
8.4
8.4
10.4
10.4
2.0
2.3
2.7
2.7
3.4
3.0
3.3
3.3
W
0.5
0.5
0.5
0.5
0.5
0.7
0.7
0.7
to
to
to
to
to
to
to
to
0.8
0.8
0.8
0.8
0.8
1.1
1.1
1.1
P
Casing
symbol
1.0
1.5
2.0
2.0
2.3
3.1
4.7
4.7
D55
E55
F55
F80
G68
G10
H10
HA5
50・60
120
1k
10k・100k
0.80
0.80
0.80
1
1
1
1.15
1.25
1.35
1.25
1.40
1.50
Part numbering system (example : 16V47µF)
RVS
Series code
̶
16
Rated voltage
symbol
V
470
M
Rated capacitance Capacitance
symbol
tolerance symbol
F55
Casing
symbol
U̶
Taping
symbol
Refer to individual page.
(Soldering conditions, Land pattern size, The taping specifications)
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
RVS
VERTICAL CHIP TYPE ALUMINUM ELECTROLYTIC CAPACITORS
Standard Ratings
6.3
Rated voltage (V)
Item
Rated
capacitance
(µF)
Case
ESR
10
Rated ripple
current
Case
(Ω)
16
Rated ripple
current
Case
(mArms) φD × L(mm)
ESR
Case
Case
Case
Rated ripple
current
(Ω)
(mArms)
—
—
—
—
—
—
—
—
—
—
—
—
4 × 5.3
199
7
2.2
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
4 × 5.3
91
10
3.3
—
—
—
—
—
—
—
—
—
—
—
—
—
4 × 5.3
60
12
4.7
—
—
—
—
—
—
—
—
—
4 × 5.3
57
12
4 × 5.3
46
14
5 × 5.3
42
17
—
—
—
16
5 × 5.3
27
21
5 × 5.3
22
23 6.3 × 5.3
20
26
12
36 6.3 × 5.3
10
50
4 × 5.3
36
22
4 × 5.3
23
21
5 × 5.3
20
25
5 × 5.3
17
28
6.3 × 5.3
33
5 × 5.3
15
30
5 × 5.3
13
31
6.3 × 5.3
11
40
6.3 × 5.3
8.0
44
47
5 × 5.3
11
36
6.3 × 5.3
9.2
43
6.3 × 5.3
7.8
47
8 × 6.5
5.6
66
100
6.3 × 5.3
61
6.3 × 5.3
4.3
60
6.3 × 5.3
3.6
60
6.3 × 7.7
2.7
91 6.3 × 7.7
150
—
5.0
8 × 6.5
—
(mArms) φD × L(mm)
ESR
—
—
(Ω)
50
Rated ripple
current
—
15
(mArms) φD × L(mm)
ESR
(Ω)
—
(Ω)
35
Rated ripple
current
—
43
(mArms) φD × L(mm)
ESR
φD × L(mm)
4 × 5.3
(Ω)
25
Rated ripple
current
1
10
(mArms) φD × L(mm)
ESR
8 × 6.5
9.0
51
6.5
59 6.3 × 7.7
6.0
60
—
—
6.3 × 7.7
4.2
63
2.2
84
8 × 10
2.0
140
180
—
—
—
—
—
6.3 × 7.7
2.4
105
8 × 10
1.8
140
8 × 10
1.4
155
10 × 10
1.3
220
8 × 6.5
2.3
102
6.3 × 7.7
2.0
105
6.3 × 7.7
1.7
105
8 × 10
1.2
155
8 × 10
0.98
190
10 ×10.5
0.91 220
330
6.3 × 7.7
1.5
105
8 × 10
1.3
195
8 × 10
1.1
195
8 × 10
0.80
190
10 ×10.5
0.65
300
—
—
—
470
8 × 10
1.1
210
8 × 10
0.92
210
8 × 10
0.78
230
10 × 10
0.57
300
—
—
—
—
—
—
680
8 × 10
0.73
210
10 × 10
0.63
310
10 × 10
0.54
310
—
—
—
—
—
—
—
—
—
1000
8 × 10
0.50
210
10 × 10
0.43
310
—
—
—
—
—
—
—
—
—
—
—
—
1500
10 × 10
0.33
310
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
(Note) Rated ripple current : 105℃ , 120Hz ; ESR : 20℃ , 120Hz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
RVL
®
VERTICAL CHIP
TYPE ALUMINUM
ELECTROLYTIC
CAPACITORS CAPACITORS
VERTICAL
CHIP TYPE
ALUMINUM ELECTROLYTIC
Chip Type 105°C Capacitors (height:6.0mm)
●
●
●
GREEN
CAP
105˚C
SMD
2000hours
RVL
Anticleaning
solvent
Compatible with surface mounting for 6.0mm height capacitors.
Supplied with carrier taping.
Guarantees 2000 hours at 105°
C.
Long life
RVL
RVS
Marking color : Black print
Specifications
Item
Performance
ー55 to +105
±20
Category temperature range (℃)
Tolerance at rated capacitance (%)
Leakage current (µA)
(max.)
(20℃,120Hz)
0.01CV or 3 whichever is larger (after 2 minutes) C : Rated capacitance (µF) ; V : Rated voltage (V)
Rated voltage (V)
tanδ (max.)
Tangent of loss angle
(tanδ)
(20℃)
6.3
0.32
10
0.28
16
0.24
25
0.18
35
0.15
50
0.14
6.3
4
8
10
3
5
16
2
4
25
2
3
35
2
3
50
2
3
(20℃,120Hz)
Rated voltage (V)
Zー25℃/Z+20℃
Impedance ratio (max.)
Zー40℃/Z+20℃
Characteristics at high
and low temperature
(120Hz)
Test time
Leakage current
Percentage of capacitance change
Tangent of the loss angle
Endurance (105℃)
(Applied ripple current)
2000 hours
The initial specified value or less
Within ±30% of initial value
300% or less of the initial specified value
Shelf life (105℃)
Test time : 1000hours ; other items are same as the endurance. Voltage application treatment : According to JIS C5101-4 4.1
Applicable standards
JIS C5101 - 1,- 18 (IEC 60384 - 1,- 18)
Outline Drawing
0.3 max.
(C)
W
L
Coefficient of Frequency for Rated Ripple Current
Frequency (Hz)
Rated voltage (V)
6.3 to 16
25・35
1 to 3.3µF
50
4.7 to 10µF
( ) : Reference size
L
5.7±0.3
5.7±0.3
5.7±0.3
5
6.3
120
1k
10k・100k
0.80
0.80
0.50
0.70
1
1
1
1
1.15
1.25
1.35
1.35
1.25
1.40
1.50
1.50
Part numbering system (example : 16V47µF)
RVL
̶
Series code
φD
4
50・60
(P)
B±0.2
φD±0.5
(C)
A±0.2
0.4±0.2
Unit : mm
A
4.3
B
4.3
C
2.0
W
0.5 to 0.8
P
1.0
Casing symbol
D60
5.3
6.6
5.3
6.6
2.3
2.7
0.5 to 0.8
0.5 to 0.8
1.5
2.0
E60
F60
16
Rated voltage
symbol
V
470
M
Capacitance
Rated capacitance
tolerance symbol
symbol
F60 U ̶
Casing
symbol
Taping
symbol
Refer to individual page.
(Soldering conditions, Land pattern size, The taping specifications)
Standard Ratings
Case
φD×L(mm)
̶
̶
̶
̶
̶
̶
̶
̶
.
6.3
ESR
(Ω)
̶
̶
̶
̶
̶
̶
̶
̶
6.3×5.7
5.3
Rated voltage (V)
Item
Rated
capacitance (µF)
1
2.2
3.3
4.7
10
22
33
47
100
Rated ripple
current
Case
(mArms) φD×L(mm)
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
6.3×5.7
̶
99
10
ESR
(Ω)
̶
̶
̶
̶
̶
̶
̶
9.9
̶
Rated ripple
current
Case
(mArms) φD×L(mm)
̶
̶
̶
̶
̶
̶
̶
̶
̶
4×5.7
̶
5×5.7
̶
6.3×5.7
74
6.3×5.7
̶
̶
16
ripple
ESR Rated
Case
current
(mArms) φD×L(mm)
(Ω)
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
4×5.7
40
27
5×5.7
18
46
6.3×5.7
12
66
6.3×5.7
̶
8.5
78
̶
̶
̶
25
ripple
ESR Rated
Case
current
(mArms) φD×L(mm)
(Ω)
̶
̶
̶
̶
̶
̶
̶
̶
̶
63
21
4×5.7
5×5.7
30
36
14
62
6.3×5.7
̶
9.0
76
̶
̶
̶
̶
̶
̶
35
ESR
(Ω)
̶
̶
̶
53
25
11
̶
̶
̶
Rated ripple
current
Case
(mArms) φD×L(mm)
̶
4×5.7
̶
4×5.7
̶
4×5.7
5×5.7
23
6.3×5.7
39
̶
65
̶
̶
̶
̶
̶
̶
50
ESR
(Ω)
232
105
70
49
23
̶
̶
̶
̶
Rated ripple
current
(mArms)
12
19
22
29
47
̶
̶
̶
̶
(Note) Rated ripple current : 105℃, 120Hz ; ESR : 20℃, 120Hz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
RVJ
RVJ
VERTICAL
CAPACITORS
VERTICALCHIP
CHIPTYPE
TYPEALUMINUM
ALUMINUMELECTROLYTIC
ELECTROLYTIC
CAPACITORS
Chip Type, 105˚C Use, Large Capacitance Capacitors
●
●
●
Compatible with surface mounting.
Supplied with carrier taping.
Guarantees 2000 hours at 105℃.
(φ12.5:5000 hours)
GREEN
CAP
®
105˚C
SMD
5000hours
Anticleaning
solvent
RVJ
High temperature
RV
Marking color : Black print
Specifications
Performance
−55 to +105
±20
Item
Category temperature range (℃)
Tolerance at rated capacitance (%)
Leakage current (µA)
(max.)
(20℃,120Hz)
(20℃)
0.01CV or 3 whichever is larger (after 2 minutes) C : Rated capacitance (µF) ; V : Rated voltage (V)
Rated voltage (V)
tanδ (max.)
Tangent of loss angle
(tanδ)
6.3
0.30
10
0.24
16
0.22
25
0.16
35
0.13
50
0.12
63
0.11
100
0.10
(20℃,120Hz)
Rated voltage (V)
Z−25℃/Z+20℃
Z−40℃/Z+20℃
Characteristics at high
and low temperature
6.3
4
8
Impedance ratio (max.)
10
3
5
16
2
4
25
2
3
35
2
3
50
2
3
63
2
3
100
2
3
(120Hz)
2000 hours (φ12.5:5000 hours)
The initial specified value or less
Within ±20% of initial value
200% or less of the initial specified value
Test time
Leakage current
Percentage of capacitance change
Tangent of the loss angle
Endurance (105℃)
(Applied ripple current)
Shelf life (105℃)
Test time : 1000hours ; other items are same as the endurance. Voltage application treatment : According to JIS C5101-4 4.1
Applicable standards
JIS C5101 - 1,
- 18 (IEC 60384 - 1,
- 18)
Outline Drawing
Unit : mm
φ8,φ10
Frequency (Hz)
0.3 max.
Rated voltage (V)
A±0.2
(C)
(P)
B±0.2
φD±0.5
(C)
( ) : Reference size
L
φD
B
A
8.4
8 6.5±0.3
8.4
10±0.5
8.4
8
8.4
10±0.5 10.4 10.4
10
12.5 13.5±0.5 13.0 13.0
C
3.4
3.0
3.3
4.9
M
0.4±0.2
0.4±0.2
0.4±0.2
0.7±0.3
W
0.5 to 0.8
0.7 to 1.1
0.7 to 1.1
P
2.3
3.1
4.7
1.0 to 1.4 4.6
120
1k
10k ・ 100k
0.80
0.80
0.80
0.70
1
1
1
1
1.15
1.25
1.35
1.35
1.25
1.40
1.50
1.50
φ12.5
W
L
50 ・ 60
6.3 to 16
25 to 35
50 to 63
100
M
Inner vent (φ10 or more)
Coefficient of Frequency for Rated Ripple Current
Casing symbol
G68
G10
H10
ⅠE
Refer to individual page.
(Soldering conditions, Land pattern size, The taping specifications)
Frequency (Hz)
Rated
capacitance(µF)
120
1k
10k
100k
47
100 to 220
330 to 1000
0.50
0.70
0.80
0.76
0.85
0.93
0.87
0.90
0.98
1
1
1
Part numbering system
φ8×6.5L
(example : 25V47µF)
RVJ
̶
25
V
Rated voltage
symbol
Series code
470
M
Capacitance
Rated capacitance
tolerance symbol
symbol
G68
U
̶
Taping
symbol
Casing
symbol
φ8×10L
(example : 25V100µF)*However, in the case of 100V, should delete "M".
RVJ
̶
25
V
Rated voltage
symbol
Series code
101
M
Capacitance
Rated capacitance
tolerance symbol
symbol
G10 Y1U ̶
Taping
symbol
Casing
symbol
φ10
(example : 16V470µF)
RVJ
̶
16
V
Rated voltage
symbol
Series code
471
M
Capacitance
Rated capacitance
tolerance symbol
symbol
H10 EU ̶
Casing
symbol
Taping
symbol
φ12.5 (example : 10V1000µF)
RVJ
Series code
̶
10
Rated voltage
symbol
V
102
M
Rated capacitance
Capacitance
symbol
tolerance symbol
ⅠE
Casing
symbol
ET ̶ R5
Taping
symbol
*10L or more product have sleeve type (white print on a brown sleeve), but old type product.
Please inquire for sleeve type P/N. However, we don't accept new orders.
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
RVJ
RVJ
®
VERTICAL
CAPACITORS
VERTICALCHIP
CHIPTYPE
TYPEALUMINUM
ALUMINUMELECTROLYTIC
ELECTROLYTIC
CAPACITORS
Standard Ratings
Rated voltage
(V)
6.3
Item Case
Rated
capacitance
(µF)
φD×L(mm)
Casing
symbol
10
Rated
ripple
current
Case
(mArms) φD×L(mm)
Casing
symbol
16
Rated
ripple
current
Case
(mArms) φD×L(mm)
Casing
symbol
25
Rated
ripple
current
Case
(mArms) φD×L(mm)
Casing
symbol
35
Rated
ripple
current
Case
(mArms) φD×L(mm)
Casing
symbol
50
Rated
ripple
current
(mArms) φD×L(mm)
10
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
22
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
33
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
8×6.5
G68
110
8×6.5
G68
110
8×10
G10
178
324
47
̶
100
̶
̶
̶
̶
̶
̶
̶
̶
8×6.5
G68
110
̶
̶
̶
8×6.5
G68
110
8×10
G10
178
8×6.5
G68
110
8×10
G10
178
10×10
H10
Case
Casing
symbol
63
Rated
ripple
current
(mArms) φD×L(mm)
̶
̶
8×6.5
G68
110
8×10
G10
8×10
G10
̶
Case
100
Rated
ripple
current
Case
(mArms) φD×L(mm)
Casing
symbol
Rated
ripple
current
(mArms)
̶
̶
8×10
G10
67
8×10
G10
99
10×10
H10
133
178
10×10
H10
160
10×10
H10
133
178
10×10
H10
160
12.5×13.5
ⅠE
475*
12.5×13.5
ⅠE
577*
̶
̶
̶
8×10
G10
178
10×10
H10
324
̶
Casing
symbol
220
8×10
G10
178
8×10
G10
178
10×10
H10
324
10×10
H10
324
10×10
H10
324
12.5×13.5
ⅠE
655*
̶
̶
̶
̶
̶
̶
330
8×10
G10
178
10×10
H10
324
10×10
H10
324
10×10
H10
324
12.5×13.5
ⅠE
747*
̶
̶
̶
̶
̶
̶
̶
̶
̶
470
10×10
H10
324
10×10
H10
324
10×10
H10
324
12.5×13.5
ⅠE
747* 12.5×13.5
ⅠE
747*
̶
̶
̶
̶
̶
̶
̶
̶
̶
10×10
H10
324
10×10
H10
324
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
12.5×13.5
ⅠE
747* 12.5×13.5
ⅠE
747*
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
1000
12.5×13.5
ⅠE
747*
(Note) Rated ripple current : 105℃, 120Hz
(Note*) Rated ripple current : 105℃, 100kHz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
RVR
®
VERTICAL
VERTICALCHIP
CHIPTYPE
TYPEALUMINUM
ALUMINUMELECTROLYTIC
ELECTROLYTICCAPACITORS
CAPACITORS
Chip type, 105°C Use, Long Life, High CV Capacitors
●
●
●
GREEN
CAP
105˚C
SMD
2000hours
Anticleaning
solvent
Compatible with surface mounting.
Supplied with carrier taping.
Guarantees 2000 hours 105℃.
High CV
RVR
RVL
Marking color : Black print
Specifications
Item
Performance
ー40 to +105
±20
Category temperature range (℃)
Tolerance at rated capacitance (%)
Leakage current (µA)
(max.)
(20℃,120Hz)
(20℃)
0.01CV or 3 whichever is larger (after 2 minutes) C : Rated capacitance (µF), V : Rated voltage (V)
Rated voltage (V)
tanδ (max.)
Tangent of loss angle
(tanδ)
4
0.50
6.3
0.30
10
0.22
16
0.16
25
0.14
35
0.12
50
0.12
(20℃,120Hz)
Rated voltage (V)
Characteristics at high
Impedance ratio (max.)
and low temperature
4
7
15
Zー25℃/Z+20℃
Zー40℃/Z+20℃
6.3
4
8
10
3
6
16
2
4
25
2
4
35
2
3
50
2
3
(120Hz)
2000 hours
The initial specified value or less
Within ±20% of initial value(φ5 or Smaller & 16V or less:±30%)
200% or less of the initial specified value
Test time
Leakage current
Percentage of capacitance change
Tangent of loss angle
Endurance (105℃)
(Applied ripple current)
Shelf life (105℃)
Test time : 1000hours ; other items are same as the endurance. Voltage application treatment : According to JIS C5101-4 4.1
Applicable standards
JIS C5101 - 1,
- 18 (IEC 60384 - 1,
- 18)
Outline Drawing
Unit : mm
Coefficient of Frequency for Rated Ripple Current
Frequency (Hz)
(P)
W
L
L
5.3±0.2
5.8±0.3
5.3±0.2
5.8±0.3
5.3±0.2
5.8±0.3
7.7±0.3
6.5±0.3
10±0.5
10.5±0.5
10±0.5
10.5±0.5
A
4.3
4.3
5.3
5.3
6.6
6.6
6.6
8.4
8.4
8.4
10.4
10.4
B
4.3
4.3
5.3
5.3
6.6
6.6
6.6
8.4
8.4
8.4
10.4
10.4
C
2.0
2.0
2.3
2.3
2.7
2.7
2.7
3.4
3.0
3.0
3.3
3.3
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.7
0.7
0.7
0.7
W
to 0.8
to 0.8
to 0.8
to 0.8
to 0.8
to 0.8
to 0.8
to 0.8
to 1.1
to 1.1
to 1.1
to 1.1
RVR
Series code
( ) : Reference size
φD
4
4
5
5
6.3
6.3
6.3
8
8
8
10
10
P
1.0
1.0
1.5
1.5
2.0
2.0
2.0
2.3
3.1
3.1
4.7
4.7
50・60
120
1k
10k・100k
0.80
0.80
0.50
1
1
1
1.15
1.25
1.35
1.25
1.40
1.50
6.3 to 16
25 to 35
50
Part numbering system (example : 16V100µF)
(C)
φD±0.5
B±0.2
(C)
A±0.2
0.4±0.2
Inner vent (φ10 only)
0.3 max.
Rated voltage
(V)
̶
16
Rated voltage
symbol
V
101
M
Rated capacitance
Capacitance
symbol
tolerance symbol
F61 U ̶
Casing
symbol
Taping
symbol
Casing symbol
D55
D61
E55
E61
F55
F61
F80
G68
G10
GA5
H10
HA5
Refer to individual page.
(Soldering conditions, Land pattern size, The taping specifications)
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
RVR
VERTICAL CHIP TYPE ALUMINUM ELECTROLYTIC CAPACITORS
Standard Ratings
4
Rated voltage(V)
Case
Rated ripple
current
6.3
Case
Casing
symbol
Rated ripple
current
10
Case
Casing
symbol
Rated ripple
current
φD×L (mm)
Casing
symbol
4.7
-
-
-
-
-
-
-
-
-
6.8
-
-
-
-
-
-
-
-
-
Item
Rated
capacitance(µF)
10
-
22
-
33
-
(mArms) φD×L (mm)
-
-
-
-
-
-
47
4×5.8
D61
42
100
5×5.8
E61
70
-
-
150
-
220
330
470
4×5.8
5×5.3
5×5.8
5×5.8
6.3×5.3
6.3×5.8
D61
E55
E61
E61
F55
F61
42
46
48
70
71
99
-
-
-
6.3×5.8
F61
6.3×5.8
F61
-
-
2.2
-
-
-
3.3
-
-
-
4.7
4×5.8
D61
23
8×6.5
G68
151
-
-
6.3×7.7
F80
183
8×10
G10
320
8×6.5
G68
157
8×10.5
GA5
320
8×10
G10
291
8×10.5
GA5
340
10×10.5
HA5
490
8×10
G10
326
8×10
G10
348
8×10.5
GA5
326
8×10.5
GA5
348
10×10
H10
440
10×10.5
HA5
440
10×10
H10
484
-
-
-
-
-
10×10.5
HA5
484
-
-
-
8×10.5
-
8×10.5
10×10
10×10.5
-
10×10.5
GA5
-
-
GA5
H10
HA5
370
495
495
10×10.5
HA5
500
-
-
-
-
-
-
-
-
10×10.5
HA5
500
-
-
-
-
-
-
HA5
550
-
-
-
-
-
-
-
-
50
Case
340
Casing
symbol
D55
10
4×5.8
D61
12
4×5.3
D55
16
4×5.8
D61
19
4×5.3
D55
16
4×5.8
D61
22
4×5.8
5×5.3
5×5.8
D61
E55
E61
26
23
29
5×5.3
E55
23
E61
F55
F61
35
35
47
6.3×5.8
F61
61
6.3×7.7
F80
82
8×6.5
G68
91
6.3×7.7
F80
97
8×6.5
G68
108
-
-
8×10.5
GA5
230
10×10.5
HA5
262
10×10.5
HA5
300
10×10.5
HA5
375
-
-
F61
74
47
6.3×5.8
F61
89
6.3×7.7
F80
117
8×6.5
G68
130
6.3×7.7
F80
142
8×6.5
G68
158
8×10
G10
283
8×10.5
GA5
283
8×10
G10
293
8×10.5
GA5
293
8×10.5
GA5
302
10×10
H10
450
10×10.5
HA5
450
-
-
-
(mArms)
4×5.3
5×5.8
6.3×5.3
6.3×5.8
6.3×5.8
-
Rated ripple
current
-
33
-
320
30
28
39
52
146
320
-
55
132
G68
G10
D61
E55
E61
F55
F80
8×6.5
GA5
-
E61
6.3×7.7
8×10.5
4×5.8
5×5.3
5×5.8
5×5.8
82
8×10
(mArms) φD×L (mm)
6.3×5.3
F61
117
-
-
6.3×5.8
156
-
φD×L (mm)
48
59
65
69
F61
296
1
E61
E61
F55
F61
F80
GA5
Rated ripple
current
5×5.8
5×5.8
6.3×5.3
6.3×5.8
6.3×5.8
8×10.5
35
36
27
39
39
46
6.3×7.7
181
Casing
symbol
D61
D61
D61
E55
E61
112
G68
Case
4×5.8
4×5.8
4×5.8
5×5.3
5×5.8
F61
8×6.5
Rated voltage(V)
25
6.3×5.8
181
-
D55
95
G68
-
4×5.3
66
70
78
8×6.5
-
-
25
E61
F55
F61
296
1500
-
D55
5×5.8
6.3×5.3
6.3×5.8
173
-
22
74
G10
-
(mArms)
D55
55
G68
-
Rated ripple
current
4×5.3
66
8×6.5
1200
Casing
symbol
-
F61
8×10
-
25
Case
(mArms) φD×L (mm)
E61
121
-
-
4×5.3
-
Rated ripple
current
5×5.8
163
-
-
Casing
symbol
6.3×5.8
F61
1000
330
40
33
41
43
47
F80
-
220
E61
D61
D61
E55
E61
6.3×5.8
-
150
5×5.8
4×5.8
4×5.8
5×5.3
5×5.8
6.3×7.7
-
100
28
121
820
68
26
D61
-
163
-
22
D55
4×5.8
-
F61
-
10
4×5.3
-
F80
-
6.8
-
6.3×5.8
680
Item
-
(mArms) φD×L (mm)
6.3×7.7
-
Rated
capacitance(µF)
-
(mArms) φD×L (mm)
16
Case
(Note) Rated ripple current : 105°C, 120Hz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
RVC
RVC
VERTICAL
VERTICALCHIP
CHIPTYPE
TYPEALUMINUM
ALUMINUMELECTROLYTIC
ELECTROLYTICCAPACITORS
CAPACITORS
Chip Type, 105°C Use, Long Life Capacitors
●
●
●
Compatible with surface mounting.
Supplied with carrier taping.
Guarantees 3000 hours at 105℃.
(10L:5000 hours).
GREEN
CAP
105˚C
SMD
3000hours
®
Anticleaning
solvent
Long life
RVC
RVL
Marking color : Black print
Specifications
Performance
ー40 to +105
±20
Item
Category temperature range (℃)
Tolerance at rated capacitance (%)
Leakage current (µA)
(max.)
(20℃,120Hz)
0.01CV or 3 whichever is larger (after 2 minutes) C : Rated capacitance (µF), V : Rated voltage (V)
Rated voltage (V)
tanδ (max.)
Tangent of loss angle
(tanδ)
6.3
0.28
10
0.24
16
0.20
25
0.16
(20℃)
35
0.13
50
0.12
(20℃,120Hz)
Rated voltage (V)
Characteristics at high
Impedance ratio (max.)
and low temperature
6.3
4
10
Zー25℃/Z+20℃
Zー40℃/Z+20℃
10
3
7
16
2
5
25
2
3
35
2
3
50
2
3
(120Hz)
3000 hours (10L : 5000 hours)
The initial specified value or less
Within ±30% of initial value
300% or less of initial specified value
Test time
Leakage current
Percentage of capacitance change
Tangent of the loss angle
Endurance (105℃)
(Applied ripple current)
Shelf life (105℃)
Test time : 1000hours ; other items are same as the endurance. Voltage application treatment : According to JIS C5101-4 4.1
Applicable standards
JIS C5101 - 1,
- 18 (IEC 60384 - 1,
- 18)
Outline Drawing
A±0.2
(C)
W
L
( ) : Reference size
φD
4
5
6.3
6.3
8
10
L
5.8±0.3
5.8±0.3
5.8±0.3
7.7±0.3
10.0±0.5
10.0±0.5
A
4.3
5.3
6.6
6.6
8.4
10.4
B
4.3
5.3
6.6
6.6
8.4
10.4
C
2.0
2.3
2.7
2.7
3.0
3.3
Coefficient of Frequency for Rated Ripple Current
Frequency (Hz)
Rated voltage (V)
6.3 to 16
25 to 35
1 to 3.3µF
50
4.7 or more
50・60
120
1k
10k・100k
0.80
0.80
0.50
0.70
1
1
1
1
1.15
1.25
1.35
1.35
1.25
1.40
1.50
1.50
(P)
B±0.2
φD±0.5
(C)
Inner vent (φ10 only)
0.3 max.
0.4±0.2
Unit : mm
0.5
0.5
0.5
0.5
0.7
0.7
W
to 0.8
to 0.8
to 0.8
to 0.8
to 1.1
to 1.1
P
1.0
1.5
2.0
2.0
3.1
4.7
Casing symbol
D61
E61
F61
F80
G10
H10
Part numbering system (example : 16V47µF)
RVC
Series code
̶
16
Rated voltage
symbol
V
470
M
Rated capacitance
Capacitance
symbol
tolerance symbol
F61 U ̶
Casing
symbol
Taping
symbol
Refer to individual page.
(Soldering conditions, Land pattern size, The taping specifications)
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
RVC
®
VERTICAL CHIP
TYPE ALUMINUM
CAPACITORSCAPACITORS
VERTICAL
CHIP TYPEELECTROLYTIC
ALUMINUM ELECTROLYTIC
RVC
Standard Ratings
Rated voltage (V)
Item
Rated
capacitance (µF)
1
2.2
3.3
4.7
10
22
33
47
100
220
330
470
1000
6.3
10
16
25
35
50
ripple
ripple
ripple
ripple
ripple
ripple
Case Casing Rated
Case Casing Rated
Case Casing Rated
Case Casing Rated
Case Casing Rated
Case Casing Rated
current
current
current
current
current
current
φD×L(mm) symbol (mArms) φD×L(mm) symbol (mArms) φD×L(mm) symbol (mArms) φD×L(mm) symbol (mArms) φD×L(mm) symbol (mArms) φD×L(mm) symbol (mArms)
4×5.8
̶
̶
̶
̶
̶
̶
10
̶
̶
̶
D61
̶
̶
̶
̶
̶
̶
4×5.8
̶
̶
̶
̶
̶
̶
16
̶
̶
̶
D61
̶
̶
̶
̶
̶
̶
4×5.8
̶
̶
̶
̶
̶
̶
17
̶
̶
̶
D61
̶
̶
̶
̶
̶
̶
5×5.8
4×5.8
̶
̶
̶
23
̶
̶
̶
E61
16
̶
̶
̶
D61
̶
̶
̶
5×5.8
̶
̶
̶
35
4×5.8
F61
28 6.3×5.8
̶
̶
̶
E61
̶
̶
̶
D61
28
6.3×5.8
̶
̶
̶
58
5×5.8
F80
55 6.3×7.7
̶
̶
̶
F61
4×5.8
E61
39
26
D61
8×10
6.3×5.8
91
̶
̶
̶
G10
57
5×5.8
E61
F80
60 6.3×7.7
̶
̶
̶
F61
43
8×10
̶
̶
̶
100
6.3×5.8
G10
̶
̶
̶
65
F80
F61
70 6.3×7.7
46
5×5.8 E61
10×10
̶
̶
̶
8×10
160
6.3×7.7
H10
̶
̶
̶
130
G10
6.3×5.8 F61
F80
81
71
6.3×7.7 F80
̶
̶
̶
10×10
̶
̶
̶
̶
̶
̶
8×10
G10
220
H10
101
160
̶
̶
̶
̶
̶
̶
G10
̶
̶
̶
̶
̶
̶
8×10
230
10×10
H10
238
̶
̶
̶
̶
̶
̶
̶
̶
̶
10×10
̶
̶
̶
̶
̶
̶
H10
340
̶
̶
̶
̶
̶
̶
̶
̶
̶
H10
̶
̶
̶
̶
̶
̶
10×10
313
(Note) Rated ripple current : 105℃, 120Hz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
RZH, RMH
VERTICAL CHIP TYPE ALUMINUM ELECTROLYTIC CAPACITORS
Chip Type 105˚C Capacitors
GREEN
CAP
105˚C
SMD
7000hours
Compatible with surface mounting.
Supplied with carrier taping.
Guaranteed 7000 hours at 105°
C.
(φ6.3X5.8L:5000 hours)
®
Anticleaning
solvent
●
●
●
Long life
RZH
RVC
Marking color : Black print
Specifications
Item
Performance
ー55 to +105
±20
Category temperature range (℃)
Tolerance at rated capacitance (%)
Leakage current (µA)
(max.)
(20℃,120Hz)
0.01CV or 3 whichever is larger (after 2 minutes) C : Rated capacitance (µF) ; V : Rated voltage (V)
Rated voltage (V)
tanδ (max.)
Tangent of loss angle
(tanδ)
6.3
0.32
10
0.28
16
0.26
(20℃)
25
0.16
35
0.14
(20℃,120Hz)
Rated voltage (V)
Zー25℃/Z+20℃
Impedance ratio (max.)
Zー40℃/Z+20℃
Zー55℃/Z+20℃
Characteristics at high
and low temperature
35
2
3
4
25
2
3
4
16
2
3
4
10
2
3
4
6.3
2
3
4
(120Hz)
Test time
Leakage current
Percentage of capacitance change
Tangent of the loss angle
Endurance (105℃)
(Applied ripple current)
7000 hours (φ6.3×5.8L:5000hours)
The initial specified value or less
Within ±30% of initial value
300% or less of the initial specified value
Shelf life (105℃)
Test time : 1000hours ; other items are the same as those for the endurance. Voltage application treatment : According to JIS C5101-4 4.1
Applicable standards
JIS C5101 - 1,
- 18 (IEC 60384 - 1,
- 18)
Outline Drawing
Unit : mm
0.3 max.
A±0.2
(P)
B±0.2
(C)
φD±0.5
10k
100k
0.50
0.8
0.95
1
RZH
̶
35
V
Rated voltage
symbol
101
M
Rated capacitance
Capacitance
symbol
tolerance symbol
F80 U ̶
Casing
symbol
Taping
symbol
RMH
Series code
L
̶
35
Rated voltage
symbol
V
331
M
Rated capacitance
Capacitance
symbol
tolerance symbol
H10 U ̶
Casing
symbol
Taping
symbol
(C)
(P)
B±0.2
(C)
A±0.2
0.4±0.2
For Vibration Resistance Type (example : 35V330µF)
0.3 max.
φD±0.5
1k
Part numbering system
Series code
For Vibration Resistance Type
Inner vent (φ10 only)
120
Standard Type (example : 35V100µF)
W
L
Coefficient of Frequency for Rated Ripple Current
Frequency (Hz)
Rated voltage (V)
6.3 to 35
(C)
Inner vent (φ10 only)
0.4±0.2
Standard Type
W
:Dummy terminal
( ) : Reference size
φD
6.3
6.3
8
10
L
5.8±0.3
7.7±0.3
10±0.5
10±0.5
A
6.6
6.6
8.4
10.4
B
6.6
6.6
8.4
10.4
C
2.7
2.7
3.0
3.3
W
0.5∼0.8
0.5∼0.8
0.7∼1.1
0.7∼1.1
P
2.0
2.0
3.1
4.7
Casing symbol
F61
F80
G10
H10
Refer to individual page.
(Soldering conditions, Land pattern size, The taping specifications)
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
RZH, RMH
VERTICAL CHIP TYPE ALUMINUM ELECTROLYTIC CAPACITORS
Standard Ratings
Rated voltag
(V)
Item
Rated
capacitance(µF)
6.3
Case
φD×L (mm)
10
ESR
Casing
symbol
(Ω max.)
Rated ripple
current
Case
Casing
symbol
(mArms)
φD×L (mm)
-
-
6.3×5.8
6.3×5.8
6.3×7.7
8×10
-
-
F61
F61
F80
G10
16
ESR
(Ω max.)
Rated ripple
current
(mArms)
φD×L (mm)
-
-
1.10
1.10
1.00
0.22
-
-
140
140
230
600
-
6.3×5.8
6.3×5.8
6.3×5.8
6.3×7.7
8×10
8×10
10×10
10×10
-
-
-
6.3×5.8
6.3×5.8
6.3×7.7
6.3×7.7
-
-
F61
F61
F80
F80
-
-
1.10
1.10
1.00
1.00
-
-
140
140
230
230
470
8×10
G10
0.22
600
8×10
G10
0.22
600
680
1000
10×10
10×10
H10
H10
0.16
0.16
850
850
10×10
-
H10
-
0.16
-
850
-
Case
Casing
symbol
ESR
Rated ripple
current
33
47
100
150
220
330
Rated voltag
(V)
Item
Rated
capacitance(µF)
22
33
47
100
150
220
330
Case
Casing
symbol
-
F61
F61
F61
F80
G10
G10
H10
H10
-
25
ESR
(Ω max.)
-
1.10
1.10
1.10
1.00
0.22
0.22
0.16
0.16
-
Rated ripple
current
Case
Casing
symbol
ESR
(Ω max.)
Rated ripple
current
(mArms)
φD×L (mm)
-
140
140
140
230
600
600
850
850
-
6.3×5.8
6.3×5.8
6.3×7.7
8×10
8×10
8×10
F61
F61
F80
G10
G10
G10
1.10
1.10
1.00
0.22
0.22
0.22
(mArms)
140
140
230
600
600
600
10×10
H10
0.16
850
-
-
-
-
-
-
-
-
35
φD×L (mm)
6.3×5.8
6.3×5.8
6.3×7.7
6.3×7.7
6.3×7.7
8×10
8×10
10×10
F61
F61
F80
F80
F80
G10
G10
H10
(Ω max.)
1.10
1.10
1.00
1.00
1.00
0.22
0.22
0.16
(mArms)
140
140
230
230
230
600
600
850
(Note) Rated ripple current : 105℃ , 100kHz ; ESR : 20℃ , 100kHz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
RVZ
VERTICAL
CHIP
TYPE
ELECTROLYTIC
VERTICAL
CHIP
TYPEALUMINUM
ALUMINUM
ELECTROLYTICCAPACITORS
CAPACITORS
Chip Type, 105°C Use, Low ESR Capacitors
Compatible with surface mounting.
Supplied with carrier taping.
Guarantees 5000 hours at 105℃.
(φ8×6.5L or less:1000hours)
(φ8×10L to φ10 :2000hours)
GREEN
CAP
Low
ESR
SMD
®
Anticleaning
solvent
105˚C
5000hours
●
●
●
Miniaturized
Low ESR
RVZ
RVJ
Marking color : Black print
Specifications
Performance
ー55 to +105
±20
Item
Category temperature range (℃)
Tolerance at rated capacitance (%)
Leakage current (µA)
(max.)
(20℃,120Hz)
0.01CV or 3 whichever is larger (after 2 minutes) C : Rated capacitance (µF) ; V : Rated voltage (V)
Rated voltage (V)
Tangent of loss angle
(tanδ)
tanδ (max.)
(20℃)
6.3
0.28
10
0.24
16
0.20
25
0.16
35
0.14
6.3
4
8
10
3
5
16
2
4
25
2
3
35
2
3
0.02 is added to every 1000µF increase over 1000µF.
Rated voltage (V)
Characteristics at high
and low temperature
Impedance ratio (max.)
Z−25℃/Z+20℃
Z−55℃/Z+20℃
(20℃,120Hz)
(120Hz)
1000 hours(φ8×6.5L or less)
2000 hours(φ8×10L to φ10)
5000 hours(φ12.5)
Test time
Endurance (105℃)
(Applied ripple current)
Leakage current
Percentage of capacitance change
Tangent of the loss angle
The initial specified value or less
Within ±25% of initial value
200% or less of initial specified value
Shelf life (105℃)
Test time : 1000hours ; other items are same as the endurance. Voltage application treatment : According to JIS C5101-4 4.1
Applicable standards
JIS C5101 - 1,
- 18 (IEC 60384 - 1,
- 18)
Outline Drawing
Unit : mm
Coefficient of Frequency for Rated Ripple Current
Frequency (Hz)
0.3 max.
6.3 to 35
(C)
(C)
(P)
B±0.2
φD±0.5
φD
4
4
5
5
6.3
6.3
6.3
8
8
8
10
10
12.5
L
A
B
5.3±0.2 4.3
4.3
5.8±0.3 4.3
4.3
5.3
5.3±0.2 5.3
5.8±0.3 5.3
5.3
5.3±0.2 6.6
6.6
5.8±0.3 6.6
6.6
7.7±0.3 6.6
6.6
6.5±0.3 8.4
8.4
10.0±0.5 8.4
8.4
10.5±0.5 8.4
8.4
10.0±0.5 10.4 10.4
10.5±0.5 10.4 10.4
13.5±0.5 13.0 13.0
C
2.0
2.0
2.3
2.3
2.7
2.7
2.7
3.4
3.0
3.0
3.3
3.3
4.9
M
0.4±0.2
0.4±0.2
0.4±0.2
0.4±0.2
0.4±0.2
0.4±0.2
0.4±0.2
0.4±0.2
0.4±0.2
0.4±0.2
0.4±0.2
0.4±0.2
0.7±0.3
W
0.5 to 0.8
0.5 to 0.8
0.5 to 0.8
0.5 to 0.8
0.5 to 0.8
0.5 to 0.8
0.5 to 0.8
0.5 to 0.8
0.7 to 1.1
0.7 to 1.1
0.7 to 1.1
0.7 to 1.1
1.0 to 1.4
1k
10k
100k
0.75
0.90
1
( ) : Reference size
P
1.0
1.0
1.5
1.5
2.0
2.0
2.0
2.3
3.1
3.1
4.7
4.7
4.6
Part numbering system
φ8×6.5L and φ6.3 or less (example : 6.3V330µF)
W
L
120
0.50
Rated voltage (V)
A±0.2
M
Inner vent (φ10 or more)
Casing symbol
D55
D61
E55
E61
F55
F61
F80
G68
G10
GA5
H10
HA5
ⅠE
Refer to individual page.
(Soldering conditions, Land pattern size, The taping specifications)
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
RVZ
̶
6
Rated voltage
symbol
Series code
331
V
M
Rated capacitance Capacitance
symbol
tolerance symbol
G68
U ̶
Taping
symbol
Casing
symbol
φ8×10L, φ8×10.5L (example : 10V220µF)
RVZ
̶
Series code
221
M
Rated voltage
10
V
Rated capacitance
Capacitance
symbol
symbol
tolerance symbol
G10 Y1U ̶
Taping
symbol
Casing
symbol
φ10 (example : 16V330µF)
RVZ
̶
Series code
16
V
H10 EU ̶
331
M
Rated voltage
Rated capacitance
Capacitance
symbol
symbol
tolerance symbol
Casing
symbol
Taping
symbol
φ12.5 (example : 25V680µF)
RVZ
Series code
̶
681
M
ⅠE
Rated voltage
25
V
Rated capacitance
Capacitance
symbol
symbol
tolerance symbol
Casing
symbol
T ̶ R5
Taping
symbol
* In the case of "for High Temperature Reflow" type, a series name is "RZA".
(φ4 to φ10)
* If "For Vibration Resistance" type is required, please see the series RTZ.
* φ8x10L - φ10x10L product have sleeve type (white print on a brown sleeve),
but old type product. Please inquire for sleeve type P/N.
However, we don't accept new orders.
CAT.No.2021/2022E
RVZ
®
VERTICAL CHIP
TYPE ALUMINUM
ELECTROLYTIC
CAPACITORS CAPACITORS
VERTICAL
CHIP TYPE
ALUMINUM ELECTROLYTIC
RVZ
Standard Ratings
6.3
Rated voltage
(V)
Rated
Item
capacitance
(µF)
Case
Casing
φD×L(mm) symbol
ESR
10
Rated ripple
current
Case
Casing
(Ω max.) (mArms) φD×L(mm) symbol
ESR
16
Rated ripple
current
Case
Casing
(Ω max.) (mArms) φD×L(mm) symbol
ESR
25
Rated ripple
current
Case
̶
4×5.3
D55
3.20
4×5.8
D61
5×5.3
E55
5×5.8
E61
Casing
(Ω max.) (mArms) φD×L(mm) symbol
ESR
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
10
̶
̶
̶
̶
4×5.3
D55
3.20
65
4×5.3
D55
3.20
65
15
̶
̶
̶
̶
̶
̶
̶
4×5.8
D61
1.80
80
4×5.3
D55
3.20
65
4×5.8
D61
1.80
80
5×5.3
E55
1.50
110
5×5.8
E61
0.76
4×5.8
D61
1.80
80
5×5.3
E55
1.50
110
5×5.8
E61
0.76
150
6.3×5.3
F55
0.85
5×5.3
E55
1.50
110
5×5.3
E55
1.50
110
6.3×5.3
F55
0.85
170
6.3×5.3
F55
0.85
5×5.8
E61
0.76
150
5×5.8
E61
0.76
150
6.3×5.8
F61
0.44
230
6.3×5.8
F61
0.44
5×5.3
E55
1.50
110
6.3×5.3
F55
0.85
170
6.3×5.3
F55
0.85
170
6.3×5.3
F55
0.85
22
33
47
68
100
150
220
̶
35
Case
Casing
(Ω max.) (mArms) φD×L(mm) symbol
̶
4.7
Rated ripple
current
ESR
Rated ripple
current
(Ω max.) (mArms)
65
4×5.3
D55
3.20
65
1.80
80
5×5.3
E55
1.50
110
1.50
110
5×5.8
E61
0.76
150
0.76
150
5×5.8
E61
0.76
150
150
5×5.8
E61
0.76
150
170
6.3×5.3
F55
0.85
170
170
6.3×5.3
F55
0.85
170
230
6.3×5.8
F61
0.44
230
170
6.3×5.8
F61
0.44
230
6.3×7.7
F80
0.34
280
8×6.5
G68
0.34
280
6.3×7.7
F80
0.34
280
8×6.5
G68
0.34
280
5×5.8
E61
0.76
150
6.3×5.8
F61
0.44
230
6.3×5.8
F61
0.44
230
6.3×5.8
F61
0.44
230
6.3×5.8
F61
0.44
230
6.3×5.8
F61
0.44
230
6.3×5.8
F61
0.44
230
6.3×5.8
F61
0.44
230
6.3×5.3
F55
0.85
170
6.3×5.3
F55
0.85
170
6.3×5.3
F55
0.85
170
8×10
G10
0.20
450
230
6.3×5.8
F61
0.44
230
230
280
0.44
0.44
0.34
F61
F61
F80
6.3×5.8
6.3×5.8
6.3×7.7
G68
0.34
280
8×10.5
GA5
0.17
450
8×10.5
GA5
0.17
450
8×6.5
G68
0.34
280
8×6.5
6.3×7.7
F80
0.34
280
8×10
G10
0.20
450
8×6.5
G68
0.34
280
8×10.5
GA5
0.17
450
6.3×7.7
F80
0.34
280
8×10.5
GA5
0.17
450
6.3×5.8
F61
0.44
230
6.3×5.8
F61
0.44
230
6.3×5.8
F61
0.44
230
6.3×7.7
F80
0.34
280
6.3×7.7
F80
0.34
280
8×6.5
G68
0.34
280
8×10
G10
0.20
450
8×10
G10
0.20
450
6.3×7.7
F80
0.34
280
8×10.5
GA5
0.17
450
8×10.5
GA5
0.17
450
H10
0.10
670
H10
0.10
670
10×10
10×10
H10
0.10
670
GA5
0.17
450
10×10
H10
0.10
670
10×10.5
HA5
0.09
670
8×10.5
H10
0.10
670
GA5
0.17
450
10×10
H10
0.10
670
10×10.5
HA5
0.09
670
12.5×13.5
ⅠE
0.06
1100
8×10.5
8×6.5
G68
0.34
280
8×10
G10
0.20
450
8×10.5
GA5
0.17
450
GA5
0.17
450
GA5
0.17
450
H10
0.10
670
10×10
H10
0.10
670
10×10
H10
0.10
670
8×10.5
GA5
0.17
450
10×10.5
HA5
0.09
670
10×10.5
HA5
0.09
670
12.5×13.5
ⅠE
0.06
1100
12.5×13.5
ⅠE
0.06
1100
8×10.5
GA5
0.17
450
670
1100
12.5×13.5
ⅠE
0.06
1100
670
0.09
0.06
0.10
HA5
ⅠE
H10
10×10.5
12.5×13.5
10×10
̶
̶
̶
̶
1500
10×10.5
HA5
0.09
670
12.5×13.5
ⅠE
0.06
1100
12.5×13.5
ⅠE
0.06
1100
̶
̶
̶
̶
̶
̶
̶
̶
2200
12.5×13.5
ⅠE
0.06
1100
12.5×13.5
ⅠE
0.06
1100
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
2700
12.5×13.5
ⅠE
0.06
1100
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
330
470
680
1000
10×10
10×10
8×10.5
̶
10×10
8×10.5
(Note) Rated ripple current : 105℃, 100kHz ; ESR : 20℃, 100kHz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
RVD
VERTICAL
VERTICALCHIP
CHIPTYPE
TYPEALUMINUM
ALUMINUMELECTROLYTIC
ELECTROLYTICCAPACITORS
CAPACITORS
Chip Type, 105˚C Use, Low ESR, Long Life Capacitors
Compatible with surface mounting.
Supplied with carrier taping.
Guarantees 2000 hours at 105℃.
(6.3V to 50V 10.0L,10.5L:5000 hours)
(φ12.5:5000 hours)
GREEN
CAP
®
Low
ESR
SMD
105˚C
5000hours
Anticleaning
solvent
●
●
●
Low ESR, Long life
RVD
RVZ
Marking color : Black print
Specifications
Item
Performance
ー55 to +105
±20
Category temperature range (℃)
Tolerance at rated capacitance (%)
Leakage current (µA)
(max.)
(20℃,120Hz)
0.01CV or 3 whichever is larger (after 2 minutes) C : Rated capacitance (µF) , V : Rated voltage (V)
Rated voltage (V)
tanδ (max.)
Tangent of loss angle
(tanδ)
6.3
0.26
10
0.19
16
0.16
25
0.14
35
0.12
50
0.10
63
0.08
(20℃)
80
0.08
100
0.07
0.02 is added to every 1000µF increase over 1000µF.
Rated voltage (V)
Zー25℃/Z+20℃
Impedance ratio (max.)
Zー40℃/Z+20℃
Zー55℃/Z+20℃
Characteristics at high
and low temperature
6.3
2
3
8
(20℃,120Hz)
10
2
3
4
16
2
3
4
50
2
3
3
35
2
3
3
25
2
3
3
63
2
3
3
100
2
3
3
80
2
3
3
(120Hz)
Test time
Leakage current
Percentage of capacitance change
Tangent of the loss angle
Endurance (105℃)
(Applied ripple current)
2000 hours (φ12.5, 6.3V to 50V 10.0L,10.5L : 5000 hours)
The initial specified value or less
Within ±30% of initial value
200% or less of the initial specified value (φ12.5, 6.3V to 50V 10.0L,10.5L : 300% or less)
Shelf life (105℃)
Test time : 1000hours ; other items are same as the endurance. Voltage application treatment : According to JIS C5101-4 4.1
Applicable standards
JIS C5101 - 1,
- 18 (IEC 60384 - 1,
- 18)
Outline Drawing
Unit : mm
0.3 max.
Frequency (Hz)
Rated voltage (V)
6.3 to 100
A±0.2
50・60
120
1k
10k・100k
0.50
0.50
0.75
1
Part numbering system
(C)
(P)
φD±0.5
B±0.2
(C)
M
Inner vent (φ10 or more)
Coefficient of Frequency for Rated Ripple Current
W
L
RVD
̶
M
0.4±0.2
0.4±0.2
0.4±0.2
0.4±0.2
0.4±0.2
0.4±0.2
0.4±0.2
0.4±0.2
0.4±0.2
0.7±0.3
0.5
0.5
0.5
0.5
0.5
0.7
0.7
0.7
0.7
1.0
W
to 0.8
to 0.8
to 0.8
to 0.8
to 0.8
to 1.1
to 1.1
to 1.1
to 1.1
to 1.4
P Casing symbol
D61
1.0
E61
1.5
F61
2.0
F80
2.0
G68
2.3
G10
3.1
GA5
3.1
4.7
H10
HA5
4.7
ⅠE
4.6
16
V
Rated voltage
symbol
Series code
( ) : Reference size
φD
L
A
B
C
4
5.8±0.3
4.3 2.0
4.3
5
5.8±0.3
5.3
5.3 2.3
6.3
5.8±0.3
6.6
6.6 2.7
6.3
7.7±0.3
6.6
6.6 2.7
6.5±0.3
8
8.4
8.4 3.4
8
10±0.5
8.4
8.4 3.0
8
10.5±0.5
8.4
8.4 3.0
10
10±0.5 10.4 10.4 3.3
10 10.5±0.5 10.4 10.4 3.3
12.5 13.5±0.5 13.0 13.0 4.9
φ10 or less (example : 16V100µF)
101
M
Rated capacitance
Capacitance
symbol
tolerance symbol
F61 U ̶
Casing
symbol
Taping
symbol
φ12.5 (example : 16V1000µF)
RVD
Series code
̶
16
Rated voltage
symbol
V
102
M
Rated capacitance
Capacitance
symbol
tolerance symbol
ⅠE
Casing
symbol
T ̶
R5
Taping
symbol
*In the case of "for High Temperature Reflow" type, a series name is "RZB". (φ4 to φ10)
*If "For Vibration Resistance" type is required, please see the series RTD.
Refer to individual page.
(Soldering conditions, Land pattern size, The taping specifications)
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
RVD
®
VERTICAL CHIP
TYPE ALUMINUM
CAPACITORS
VERTICAL
CHIP TYPE ELECTROLYTIC
ALUMINUM ELECTROLYTIC
CAPACITORS
Standard Ratings
Rated voltage
(V)
Item
Rated
capacitance
(µF)
10
22
33
47
100
220
330
470
680
1000
1500
2200
6.3
ESR
Rated ripple
current
Case
φD×L(mm)
(Ω max.)
(mArms)
̶
̶
̶
̶
D61
1.35
̶
̶
4×5.8
D61
1.35
90
5×5.8
E61
0.70
170
5×5.8
E61
0.70
170
6.3×5.8
F61
0.36
250
6.3×5.8
F61
0.36
250
6.3×7.7
F80
0.30
300
8×6.5
G68
0.30
300
8×10
G10
0.16
600
4×5.8
̶
̶
̶
Item
4.7
̶
90
̶
̶
600
(mArms)
φD×L(mm)
̶
̶
̶
4×5.8
D61
1.35
4×5.8
D61
1.35
90
5×5.8
E61
0.70
170
D61
1.35
90
4×5.8
D61
1.35
90
5×5.8
E61
0.70
170
̶
̶
̶
̶
̶
̶
̶
6.3×7.7
F80
8×6.5
G68
8×10
8×10
̶
Rated ripple
current
(Ω max.)
(mArms)
̶
̶
90
̶
5×5.8
E61
0.70
170
6.3×5.8
F61
0.36
250
̶
6.3×5.8
F61
0.36
250
0.30
300
6.3×7.7
F80
0.30
300
0.30
300
8×6.5
G68
0.30
300
G10
0.16
600
8×10
G10
0.16
600
G10
0.16
600
8×10
G10
0.16
600
10×10
H10
0.090
850
10×10.5
HA5
0.080
850
12.5×13.5
ⅠE
0.054
1160
8×10
G10
0.16
600
10×10
H10
0.090
850
10×10.5
HA5
0.080
850
12.5×13.5
ⅠE
0.054
1160
12.5×13.5
ⅠE
0.054
1160
0.054
1160
̶
̶
̶
̶
Rated ripple
current
Case
ESR
Rated ripple
current
(mArms)
φD×L(mm)
Casing
symbol
(Ω max.)
(mArms)
60
0.090
850
0.080
850
12.5×13.5
ⅠE
0.054
1160
12.5×13.5
ⅠE
Case
Casing
symbol
ESR
Rated ripple
current
Case
(Ω max.)
(mArms)
φD×L(mm)
Casing
symbol
̶
̶
̶
4×5.8
D61
1.35
90
4×5.8
D61
2.7
4×5.8
D61
1.35
90
5×5.8
E61
1.5
5×5.8
E61
0.70
170
6.3×5.8
F61
0.86
170
5×5.8
E61
0.70
170
6.3×5.8
F61
0.86
170
6.3×7.7
F80
0.66
195
8×6.5
G68
0.63
200
25
φD×L(mm)
̶
35
E61
0.70
170
E61
0.70
170
6.3×5.8
F61
0.36
250
6.3×5.8
F61
0.36
470
(Ω max.)
̶
4×5.8
ESR
H10
5×5.8
330
φD×L(mm)
Casing
symbol
HA5
5×5.8
220
Case
10×10.5
22
100
Rated ripple
current
10×10
4×5.8
47
ESR
0.16
10
33
16
Casing
symbol
G10
8×10
Rated voltage
(V)
Rated
capacitance
(µF)
10
Casing
symbol
Case
RVD
D61
1.35
90
50
ESR
(Ω max.)
6.3×5.8
F61
0.36
250
250
6.3×5.8
F61
0.36
250
90
6.3×7.7
F80
0.66
195
8×6.5
G68
0.63
200
350
6.3×7.7
F80
0.30
300
6.3×7.7
F80
0.30
300
8×10
G10
0.34
8×6.5
G68
0.30
300
8×10
G10
0.16
600
8×10.5
GA5
0.32
350
10×10
H10
0.20
700
10×10.5
HA5
0.18
700
12.5×13.5
ⅠE
0.12
900
8×10
8×10
G10
0.16
G10
0.16
600
600
10×10
H10
0.090
850
10×10.5
HA5
0.080
850
8×10
G10
0.16
600
10×10
H10
0.090
850
10×10.5
HA5
0.080
850
12.5×13.5
ⅠE
0.054
1160
̶
̶
̶
̶
680
12.5×13.5
ⅠE
0.054
1160
12.5×13.5
ⅠE
0.054
1160
̶
̶
̶
̶
1000
12.5×13.5
ⅠE
0.054
1160
̶
̶
̶
̶
̶
̶
̶
̶
Case
ESR
Rated ripple
current
Case
Rated ripple
current
Case
Rated ripple
current
(mArms)
φD×L(mm)
(Ω max.)
(mArms)
φD×L(mm)
Casing
symbol
ESR
(Ω max.)
Casing
symbol
ESR
φD×L(mm)
Casing
symbol
(Ω max.)
(mArms)
5×5.8
E61
3.0
50
̶
̶
̶
̶
̶
̶
̶
̶
10
6.3×5.8
F61
1.5
80
6.3×7.7
F80
2.4
60
̶
̶
̶
̶
22
6.3×7.7
F80
1.2
120
8×10
G10
0.90
130
8×10
G10
1.30
130
33
8×10
G10
0.65
250
8×10
G10
0.90
130
10×10
H10
0.70
200
47
8×10
G10
0.65
250
10×10
H10
0.50
200
̶
̶
̶
̶
68
8×10
G10
0.65
250
̶
̶
̶
̶
̶
̶
̶
̶
10×10
H10
0.35
400
12.5×13.5
ⅠE
0.16
600
12.5×13.5
ⅠE
0.18
550
̶
̶
̶
̶
12.5×13.5
ⅠE
0.16
600
̶
̶
̶
̶
̶
̶
̶
̶
Rated voltage
(V)
Item
Rated
capacitance
(µF)
4.7
100
220
63
80
100
(Note) Rated ripple current : 105℃, 100kHz
ESR : 20℃, 100kHz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
RVV
RVV, RTV
CHIP TYPE
ALUMINUM ELECTROLYTIC
VERTICAL CHIPVERTICAL
TYPE ALUMINUM
ELECTROLYTIC
CAPACITORSCAPACITORS
Chip Type, 105˚C Use,Low ESR Capacitors
●
●
●
Compatible with surface mounting.
Supplied with carrier taping.
Guarantees 2000 hours at 105℃.
GREEN
CAP
Low
ESR
SMD
105˚C
2000hours
®
Anticleaning
solvent
Low ESR
RVV
RVD
Marking color : Black print
Specifications
Item
Performance
ー55 to +105
±20
Category temperature range (℃)
Tolerance at rated capacitance (%)
Leakage current (µA)
(max.)
(20℃,120Hz)
0.01CV or 3 whichever is larger (after 2 minutes) C : Rated capacitance (µF) , V : Rated voltage (V)
Rated voltage (V)
tanδ (max.)
Tangent of loss angle
(tanδ)
6.3
0.26
10
0.19
16
0.16
25
0.14
(20℃)
35
0.12
50
0.10
(20℃,120Hz)
Rated voltage (V)
Zー25℃/Z+20℃
Impedance ratio (max.)
Zー40℃/Z+20℃
Zー55℃/Z+20℃
Characteristics at high
and low temperature
35
2
3
3
25
2
3
3
16
2
3
4
10
2
3
4
6.3
2
3
4
50
2
3
3
(120Hz)
Test time
Leakage current
Percentage of capacitance change
Tangent of the loss angle
Endurance (105℃)
(Applied ripple current)
2000 hours
The initial specified value or less
Within ±30% of initial value
200% or less of initial specified value
Shelf life (105℃)
Test time : 1000hours ; other items are same as the endurance. Voltage application treatment : According to JIS C5101-4 4.1
Applicable standards
JIS C5101 - 1,
- 18 (IEC 60384 - 1,
- 18)
Outline Drawing
Unit : mm
0.3 max.
A±0.2
(P)
B±0.2
(C)
φD±0.5
1k
10k・100k
0.50
0.50
0.75
1
RVV
̶
16
V
Rated voltage
symbol
101
M
Rated capacitance
Capacitance
symbol
tolerance symbol
F61 U ̶
Casing
symbol
Taping
symbol
RTV
Series code
L
̶
25
Rated voltage
symbol
V
471
M
Rated capacitance
Capacitance
symbol
tolerance symbol
H10 U ̶
Casing
symbol
Taping
symbol
(C)
(P)
B±0.2
(C)
A±0.2
0.4±0.2
For Vibration Resistance Type (example : 25V470µF)
0.3 max.
φD±0.5
120
Part numbering system
Series code
For Vibration Resistance Type
Inner vent (φ10 only)
50・60
Standard Type (example : 16V100µF)
W
L
Coefficient of Frequency for Rated Ripple Current
Frequency (Hz)
Rated voltage (V)
6.3 to 50
(C)
Inner vent (φ10 only)
0.4±0.2
Standard Type
W
:Dummy terminal
( ) : Reference size
φD
6.3
6.3
8
10
L
5.8±0.3
7.7±0.3
10±0.5
10±0.5
A
6.6
6.6
8.4
10.4
B
6.6
6.6
8.4
10.4
C
2.7
2.7
3.0
3.3
W
0.5 to 0.8
0.5 to 0.8
0.7 to 1.1
0.7 to 1.1
P
2.0
2.0
3.1
4.7
Casing symbol
F61
F80
G10
H10
Refer to individual page.
(Soldering conditions, Land pattern size, The taping specifications)
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
RVV, RTV
VERTICAL CHIP TYPE ALUMINUM ELECTROLYTIC CAPACITORS
Standard Ratings
Rated voltage
(V)
Rated
capacitance
(µF)
Item
47
6.3
Casing
φD × L(mm) symbol
—
100
6.3 × 5.8
10
(Ω max.)
Rated ripple
current
(mArms)
—
—
Case
ESR
—
F61
0.26
Casing
φD × L(mm) symbol
—
300
—
16
(Ω max.)
Rated ripple
current
(mArms)
—
—
Case
ESR
—
—
—
—
(Ω max.)
Rated ripple
current
(mArms)
6.3 × 5.8
F61
0.26
300
6.3 × 5.8
F61
0.26
300
6.3 × 7.7
F80
0.16
600
600
Case
Casing
φD × L(mm) symbol
ESR
220
6.3 × 5.8
F61
0.26
300
6.3 × 7.7
F80
0.16
600
6.3 × 7.7
F80
0.16
330
6.3 × 7.7
F80
0.16
600
8 × 10
G10
0.09
850
8 × 10
G10
0.09
850
470
8 × 10
G10
0.09
850
8 × 10
G10
0.09
850
8 × 10
G10
0.09
850
—
—
—
8 × 10
G10
0.09
850
10 × 10
H10
0.07
1190
1000
680
8 × 10
—
G10
0.09
850
10 × 10
H10
0.07
1190
—
—
—
—
1500
10 × 10
H10
0.07
1190
—
—
—
—
—
—
—
—
Case
ESR
Case
ESR
Rated voltage
(V)
25
35
50
(Ω max.)
Rated ripple
current
(mArms)
(Ω max.)
Rated ripple
current
(mArms)
(Ω max.)
Rated ripple
current
(mArms)
33
6.3 × 5.8
F61
0.26
300
6.3 × 5.8
F61
0.26
300
—
—
—
—
47
6.3 × 5.8
F61
0.26
300
6.3 × 5.8
F61
0.26
300
—
—
—
—
6.3 × 7.7
F80
0.16
600
8 × 10
G10
0.09
850
8 × 10
G10
0.18
670
8 × 10
Rated
capacitance
(µF)
100
Item
Case
Casing
φD × L(mm) symbol
6.3 × 7.7
F80
ESR
0.16
600
Casing
φD × L(mm) symbol
Casing
φD × L(mm) symbol
220
8 × 10
G10
0.09
850
8 × 10
G10
0.09
850
G10
0.18
670
330
8 × 10
G10
0.09
850
10 × 10
H10
0.07
1190
—
—
—
—
470
10 × 10
H10
0.07
1190
—
—
—
—
—
—
—
—
(Note) Rated ripple current : 105℃ , 100kHz
ESR : 20℃ , 100kHz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
RZD
RZD, RMD
VERTICAL
CHIP TYPE
ALUMINUM ELECTROLYTIC
VERTICAL CHIP TYPE
ALUMINUM
ELECTROLYTIC
CAPACITORSCAPACITORS
GREEN
CAP
Chip Type, 105˚C Use, Low ESR, High CV Capacitors
●
●
●
Compatible with surface mounting.
Supplied with carrier taping.
Guaranteed 2000 hours at 105°
C.
SMD
Low ESR
®
Anticleaning
solvent
105˚C
2000hours
High CV
RZD
RVV
Marking color : Black print
Specifications
Item
Performance
ー55 to +105
±20
Category temperature range (℃)
Tolerance at rated capacitance (%)
Leakage current (µA)
(max.)
(20℃,120Hz)
0.01CV or 3 whichever is larger (after 2 minutes) C : Rated capacitance (µF) , V : Rated voltage (V)
Rated voltage (V)
tanδ (max.)
Tangent of loss angle
(tanδ)
6.3
0.26
10
0.19
16
0.16
25
0.14
(20℃)
35
0.12
50
0.10
0.02 is added to every 1000µF increase over 1000µF.
Rated voltage (V)
Zー25℃/Z+20℃
Impedance ratio (max.)
Zー40℃/Z+20℃
Zー55℃/Z+20℃
Characteristics at high
and low temperature
(20℃,120Hz)
35
2
3
3
25
2
3
3
16
2
3
4
10
2
3
4
6.3
2
3
4
50
2
3
3
(120Hz)
Test time
Leakage current
Percentage of capacitance change
Tangent of the loss angle
Endurance (105℃)
(Applied ripple current)
2000 hours
The initial specified value or less
Within ±30% of initial value
200% or less of the initial specified value
Shelf life (105℃)
Test time : 1000hours ; other items are same as the endurance. Voltage application treatment : According to JIS C5101-4 4.1
Applicable standards
JIS C5101 - 1,
- 18 (IEC 60384 - 1,
- 18)
Outline Drawing
Unit : mm
0.3 max.
A±0.2
(P)
B±0.2
(C)
φD±0.5
10k・100k
0.50
0.50
0.75
1
̶
35
V
Rated voltage
symbol
151
M
Rated capacitance
Capacitance
symbol
tolerance symbol
F80 U ̶
Casing
symbol
Taping
symbol
RMD
̶
25
Rated voltage
symbol
V
821
M
Rated capacitance
Capacitance
symbol
tolerance symbol
H10 U ̶
Casing
symbol
Taping
symbol
(C)
(P)
B±0.2
L
RZD
Series code
(C)
A±0.2
1k
For Vibration Resistance Type (example : 25V820µF)
0.4±0.2
0.3 max.
φD±0.5
Inner vent (φ10 only)
120
Part numbering system
Series code
For Vibration Resistance Type
50・60
Standard Type (example : 35V150µF)
W
L
Coefficient of Frequency for Rated Ripple Current
Frequency (Hz)
Rated voltage (V)
6.3 to 50
(C)
Inner vent (φ10 only)
0.4±0.2
Standard Type
W
:Dummy terminal
( ) : Reference size
φD
6.3
6.3
8
10
L
5.8±0.3
7.7±0.3
10±0.5
10±0.5
A
6.6
6.6
8.4
10.4
B
6.6
6.6
8.4
10.4
C
2.7
2.7
3.0
3.3
W
0.5 to 0.8
0.5 to 0.8
0.7 to 1.1
0.7 to 1.1
P
2.0
2.0
3.1
4.7
Casing symbol
F61
F80
G10
H10
Refer to individual page.
(Soldering conditions, Land pattern size, The taping specifications)
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
RZD, RMD
VERTICAL CHIP TYPE ALUMINUM ELECTROLYTIC CAPACITORS
Standard Ratings
Rated voltage
(V)
6.3
10
16
(Ω max.)
Rated ripple
current
(mArms)
(Ω max.)
Rated ripple
current
(mArms)
150
—
—
—
—
—
—
—
—
6.3 × 5.8
F61
0.26
220
—
—
—
—
6.3 × 5.8
F61
0.26
300
6.3 × 5.8
F61
0.26
300
330
6.3 × 5.8
F61
0.26
300
6.3 × 7.7
F80
0.16
600
6.3 × 7.7
F80
0.16
600
470
6.3 × 7.7
F80
0.16
600
6.3 × 7.7
F80
0.16
600
680
6.3 × 7.7
F80
0.16
600
—
—
—
Rated
capacitance
(µF)
Item
1000
Case
Casing
φD × L(mm) symbol
—
ESR
Casing
φD × L(mm) symbol
ESR
—
Case
Casing
φD × L(mm) symbol
—
ESR
(Ω max.)
Rated ripple
current
(mArms)
300
—
—
8 × 10
G10
0.08
850
—
—
—
8 × 10
G10
0.08
850
10 × 10
H10
0.06
1190
1500
8 × 10
G10
0.08
850
10 × 10
H10
0.06
1190
—
—
—
—
2200
10 × 10
H10
0.06
1190
—
—
—
—
—
—
—
—
ESR
Case
ESR
Case
ESR
Rated ripple
current
(mArms)
Rated voltage
(V)
—
Case
25
35
50
(Ω max.)
Rated ripple
current
(mArms)
(Ω max.)
Rated ripple
current
(mArms)
47
—
—
—
—
—
—
—
—
6.3 × 5.8
F61
0.68
195
100
—
—
—
—
6.3 × 5.8
F61
0.26
300
6.3 × 7.7
F80
0.34
350
600
Rated
capacitance
(µF)
Item
Case
Casing
φD × L(mm) symbol
Casing
φD × L(mm) symbol
150
6.3 × 5.8
F61
0.26
300
6.3 × 7.7
F80
0.16
220
6.3 × 7.7
F80
0.16
600
—
—
—
330
—
—
—
G10
0.08
470
8 × 10
—
850
8 × 10
—
850
Casing
φD × L(mm) symbol
—
(Ω max.)
—
—
8 × 10
G10
0.18
—
670
10 × 10
H10
0.12
900
G10
0.08
—
—
—
—
—
—
—
—
560
—
—
—
—
10 × 10
H10
0.06
1190
—
—
—
—
820
10 × 10
H10
0.06
1190
—
—
—
—
—
—
—
—
(Note) Rated ripple current : 105℃ , 100kHz
ESR : 20℃ , 100kHz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
RZK, RMK
★NEW
VERTICAL CHIP TYPE ALUMINUM ELECTROLYTIC CAPACITORS
GREEN
CAP
Chip Type, 105˚C Use, Low ESR, High CV Capacitors
Low
ESR
SMD
105˚C
2000hours
Anticleaning
solvent
Compatible with surface mounting.
• Supplied with carrier taping.
• Guaranteed 2000 hours at 105℃ .
●
High CV
RZK
RZD
Marking color : Black print
Specifications
Item
Performance
ー 55 to + 105
± 20
Category temperature range (℃ )
Tolerance at rated capacitance (%)
Leakage current (µA)
(max.)
Tangent of loss angle
(tanδ)
(20℃ , 120Hz)
0.01CV or 3 whichever is larger (after 2 minutes) C : Rated capacitance (µF) ; V : Rated voltage (V)
(20℃)
Rated voltage (V)
tanδ (max.)
25
0.14
35
0.12
0.02 is added to every 1000µF increase over 1000µF
(20℃ , 120Hz)
Rated voltage (V)
Z− 25℃ / Z+ 20℃
Impedance ratio (max.)
Z− 40℃ / Z+ 20℃
Z− 55℃ / Z+ 20℃
Characteristics at high
and low temperature
25
2
3
3
35
2
3
3
(120Hz)
Test time
Leakage current
Percentage of capacitance change
Tangent of the loss angle
Endurance (105℃ )
(Applied ripple current)
Shelf life (105℃ )
Applicable standards
2000 hours
The initial specified value or less
Within ± 30% of initial value
200% or less of the initial specified value
Test time : 1000hours ; other items are same as the endurance. Voltage application treatment : According to JIS C5101-4 4.1
JIS C5101-1,-18(IEC 60384-1,-18)
Coefficient of Frequency for Rated Ripple Current
Frequency (Hz)
Rated voltage (V)
Part numbering system
50・60
120
1k
10k・100k
0.50
0.50
0.75
1
25 to 35
Standard Type (example : 35V680µF)
RZK
—
Series code
Refer to individual page.
(Soldering conditions, Land pattern size, The taping specifications)
35
V
Rated voltage
symbol
681
M
H10
Rated
capacitance
symbol
Capacitance
tolerance
symbol
Casing
symbol
U
Taping
symbol
For Vibration Resistance Type (example : 35V680µF)
RMK —
Series code
35
V
Rated voltage
symbol
681
M
H10
Rated
capacitance
symbol
Capacitance
tolerance
symbol
Casing
symbol
U
(C)
B±0.2
φD±0.5
A±0.2
(C)
(P)
B±0.2
φD±0.5
0.3 max.
W
L
L
( ) : Reference size
A
8.4
10.4
B
8.4
10.4
C
3.0
3.3
W
0.7 to 1.1
0.7 to 1.1
P
3.1
4.7
(C)
Inner vent (φ10 only)
(C)
A±0.2
(P)
0.4±0.2
0.3 max.
Inner vent (φ10 only)
For Vibration Resistance Type
0.4±0.2
Unit : mm
Standard Type
L
10 ± 0.5
10 ± 0.5
—
Taping
symbol
Outline Drawing
φD
8
10
—
W
:Dummy terminal
Casing symbol
G10
H10
Standard Ratings
Rated voltage
(V)
Item
Rated
capacitance
(µF)
470
560
680
1000
25
35
ESR
Rated ripple current
(Ω max.)
(mArms)
—
—
—
G10
0.08
—
—
—
10 × 10
H10
0.06
Case
Casing
φD × L(mm) symbol
—
8 × 10
Case
Casing
φD × L(mm) symbol
Rated ripple current
(mArms)
G10
0.08
—
—
—
—
—
10 × 10
H10
0.06
1190
1190
—
—
—
—
850
8 × 10
ESR
(Ω max.)
850
(Note) R
ated ripple current : 105℃ , 100kHz
ESR : 20℃ , 100kHz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
RVT
VERTICAL
CHIP
TYPE
ALUMINUM
ELECTROLYTIC
CAPACITORS
VERTICAL
CHIP
TYPE
ALUMINUM
ELECTROLYTIC
CAPACITORS
GREEN
CAP
Chip Type, 125°C Use, Low ESR, Long Life Capacitors
Compatible with surface mounting.
Supplied with carrier taping.
Guaranteed 1000 to 5000 hours at 125°
C.
(See table below)
SMD
®
Low ESR
125˚C
5000hours
Anticleaning
solvent
●
●
●
Low ESR, Long Life
RVT
RVK
Marking color : Black print
Specifications
Item
Performance
ー40 to +125
±20
Category temperature range (℃)
Tolerance at rated capacitance (%)
Leakage current (µA)
(max.)
(20℃,120Hz)
(20℃)
0.01CV or 3 whichever is larger (after 2 minutes) C : Rated capacitance (µF) ; V : Rated voltage (V)
10
0.24
Rated voltage (V)
tanδ (max.)
Tangent of loss angle
(tanδ)
16
0.20
25
0.16
35
0.14
50
0.14
63
0.12
80
0.12
100
0.10
(20℃,120Hz)
Rated voltage (V)
Characteristics at high
Impedance Ratio (max.)
and low temperature
Zー25℃/Z+20℃
Zー40℃/Z+20℃
10
3
4
16
2
3
25
2
3
35
2
3
50
2
3
63
2
3
80
2
3
100
2
3
(120Hz)
1000
2000
3000
5000
Test time
Endurance (125℃)
(Applied ripple current)
Leakage current
Capacitance change
Tangent of loss angle
hours
hours
hours
hours
(φ8x6.5L or less)
(φ8x10L,
φ10X10L)
(63V to 100V : φ12.5)
(50V or less : φ12.5)
The initial specified value or less
Within ±30% of initial value
300% or less of the initial specified value
Shelf life (125℃)
Test time : 1000hours ; other items are same as the endurance. Voltage application treatment : According to JIS C5101-4 4.1
Applicable standards
JIS C5101 - 1,
- 18 (IEC 60384 - 1,
- 18)
Outline Drawing
Unit : mm
0.3 max.
Frequency (Hz)
A±0.2
120
1k
10k
100k
0.77
0.88
0.96
1
Rated voltage(V)
M
10 to 100
Part numbering system
(C)
(P)
φD±0.5
B±0.2
(C)
Inner vent (φ10 or more)
Coefficient of Frequency for Rated Ripple Current
W
L
( ) : Reference size
A
B
φD
L
4
5.8±0.3
4.3
4.3
5
5.8±0.3
5.3
5.3
6.6
6.6
6.3
5.8±0.3
6.6
6.6
6.3
7.7±0.3
8
6.5±0.3
8.4
8.4
8.4
8
10±0.5
8.4
10
10±0.5 10.4 10.4
12.5 13.5±0.5 13.0 13.0
C
2.0
2.3
2.7
2.7
3.4
3.0
3.3
4.9
M
0.4±0.2
0.4±0.2
0.4±0.2
0.4±0.2
0.4±0.2
0.4±0.2
0.4±0.2
0.7±0.3
0.5
0.5
0.5
0.5
0.5
0.7
0.7
1.0
W
to 0.8
to 0.8
to 0.8
to 0.8
to 0.8
to 1.1
to 1.1
to 1.4
P Casing symbol
D61
1.0
E61
1.5
F61
2.0
F80
2.0
G68
2.3
G10
3.1
4.7
H10
ⅠE
4.6
Refer to individual page.
(Soldering conditions, Land pattern size, The taping specifications)
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
φ10 or less (example : 16V100µF)
RVT
̶
35
V
Rated voltage
symbol
Series code
221
M
Rated capacitance
Capacitance
symbol
tolerance symbol
H10 U ̶
Taping
symbol
Casing
symbol
50V or less : φ12.5 (example : 35V330µF)
RVT
̶
35
V
Rated voltage
symbol
Series code
331
M
Rated capacitance
Capacitance
symbol
tolerance symbol
ⅠE
T ̶
Casing
symbol
R5
Taping
symbol
63V to 100V : φ12.5 (example : 63V100µF)
RVT
Series code
̶
63
Rated voltage
symbol
V
101
M
Rated capacitance
Capacitance
symbol
tolerance symbol
ⅠE KT ̶
R5
Casing
symbol
Taping
symbol
*In the case of "for High Temperature Reflow" type, a series name is "RZC". (φ4 to φ10)
*If "For Vibration Resistance" type is required, please see the series RTT.
CAT.No.2021/2022E
RVT
®
VERTICAL CHIP
TYPE ALUMINUM
ELECTROLYTIC
CAPACITORS CAPACITORS
VERTICAL
CHIP TYPE
ALUMINUM ELECTROLYTIC
RVT
Standard Ratings
Rated voltage(V)
Item
Rated
capacitance(µF)
10
10
16
φD×L(mm)
20℃
ー40℃
Rated ripple
current
(mArms)
̶
̶
̶
̶
Case
ESR
(Ω max.)
Case
25
Rated ripple
current
(mArms)
φD×L(mm)
45
50
5×5.8
1.5
23
81
6.3×5.8
1.0
15
114
15
114
ESR
(Ω max.)
φD×L(mm)
4×5.8
3.0
20℃
ー40℃
22
4×5.8
3.0
45
50
5×5.8
1.5
23
81
33
5×5.8
1.5
23
81
6.3×5.8
1.0
15
114
47
̶
̶
̶
̶
6.3×5.8
100
̶
̶
̶
̶
̶
220
15
1.0
̶
̶
165
8×6.5
0.60
9.0
180
6.3×7.7
0.60
9.0
165
8×6.5
0.60
9.0
180
8×10
0.20
2.0
340
340
8×10
0.20
2.0
340
8×6.5
0.60
9.0
180
10×10
0.15
1.5
500
10×10
0.15
1.5
500
10×10
10×10
0.15
1.5
500
500
470
10×10
0.15
1.5
500
12.5×13.5
0.086
1.29
680
12.5×13.5
0.086
1.29
750
12.5×13.5
0.086
1000
12.5×13.5
0.086
1.29
750
̶
̶
Rated voltage(V)
47
9.0
2.0
340
33
0.60
0.20
1.5
22
1.0
8×10
2.0
10
6.3×5.8
6.3×7.7
165
0.15
4.7
ー40℃
9.0
0.20
Rated
capacitance(µF)
20℃
Rated ripple
current
(mArms)
0.60
8×10
Item
̶
ESR
(Ω max.)
6.3×7.7
10×10
330
114
Case
φD×L(mm)
ESR
(Ω max.)
20℃
1.5
500
0.086
1.29
750
750
12.5×13.5
0.086
1.29
750
1.29
750
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
Case
50
35
Case
0.15
12.5×13.5
ー40℃
Rated ripple
current
(mArms)
63
20℃
ー40℃
Rated ripple
current
(mArms)
̶
̶
̶
6.3×5.8
3.2
48
58
6.3×7.7
114
6.3×7.7
1.2
18
95
165
6.3×7.7
1.2
18
95
8×10
0.50
7.5
8×10
0.50
7.5
10×10
0.30
4×5.8
3.0
45
50
5×5.8
1.5
23
81
6.3×5.8
1.0
15
114
6.3×5.8
1.0
15
6.3×7.7
0.60
9.0
8×6.5
0.60
9.0
180
6.3×7.7
0.60
9.0
165
8×6.5
0.60
9.0
180
8×10
0.20
2.0
340
Case
φD×L(mm)
̶
ESR
(Ω max.)
φD×L(mm)
̶
20℃
ー40℃
Rated ripple
current
(mArms)
̶
̶
̶
ESR
(Ω max.)
1.8
36
95
8×10
0.70
14
140
8×10
0.70
14
140
180
10×10
0.50
10
200
180
8×10
0.70
14
140
4.5
280
10×10
0.50
10
200
12.5×13.5
0.25
8×10
0.20
2.0
340
10×10
0.30
4.5
280
10×10
0.15
1.5
500
12.5×13.5
0.18
2.7
550
220
10×10
0.15
1.5
500
12.5×13.5
0.18
2.7
550
̶
̶
̶
̶
330
12.5×13.5
0.086
1.29
750
̶
̶
̶
̶
̶
̶
̶
100
Rated voltage(V)
Item
Rated
capacitance(µF)
10
22
33
47
̶
400
100
80
φD×L(mm)
20℃
ー40℃
Rated ripple
current
(mArms)
φD×L(mm)
20℃
8×10
0.75
15
110
8×10
0.75
15
110
8×10
0.75
15
110
8×10
0.75
15
110
10×10
0.55
11
150
10×10
0.55
11
150
8×10
0.75
15
110
10×10
0.55
11
150
10×10
0.55
11
150
̶
̶
̶
̶
12.5×13.5
0.32
Case
3.75
ESR
(Ω max.)
Case
ESR
(Ω max.)
ー40℃
4.8
Rated ripple
current
(mArms)
300
(Note) Rated ripple current : 125℃, 100kHz
ESR : 100kHz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
RZJ, RMJ
☆UPGRADE
VERTICAL CHIP TYPE ALUMINUM ELECTROLYTIC CAPACITORS
GREEN
CAP
Chip Type, 125˚C Use, Low ESR, Long Life Capacitors
Compatible with surface mounting.
Supplied with carrier taping.
Guaranteed 3000 hours at 125°
C.
(φ6.3 : 2000 hours)
Specify ESR after endurance test.
SMD
Low ESR
125˚C
3000hours
®
Anticleaning
solvent
●
●
●
Low ESR, Long Life
RZJ
●
RVT
Marking color : Black print
Specifications
Item
Performance
ー40 to +125
±20
Category temperature range (℃)
Tolerance at rated capacitance (%)
Leakage current (µA)
(max.)
(20℃,120Hz)
0.01CV or 3 whichever is larger (after 2 minutes) C : Rated capacitance (µF) ; V : Rated voltage (V)
Rated voltage (V)
tanδ (max.)
Tangent of loss angle
(tanδ)
10
0.30
16
0.23
25
0.18
(20℃)
50
0.16
35
0.16
(20℃,120Hz)
Rated voltage (V)
Zー25℃/Z+20℃
Zー40℃/Z+20℃
Characteristics at high
and low temperature
35
2
3
25
2
3
16
2
3
10
3
4
Impedance ratio (max.)
50
2
3
(120Hz)
Test time
Leakage current
Percentage of capacitance change
Tangent of the loss angle
Endurance (125℃)
(Applied ripple current)
3000 hours (φ6.3 : 2000 hours)
The initial specified value or less
Within ±30% of initial value
300% or less of the initial specified value
Shelf life (125℃)
Test time : 1000hours ; other items are same as the endurance. Voltage application treatment : According to JIS C5101-4 4.1
Applicable standards
JIS C5101 - 1,
- 18 (IEC 60384 - 1,
- 18)
Outline Drawing
Unit : mm
0.3 max.
A±0.2
Frequency (Hz)
Rated voltage (V)
10 to 50
(P)
W
L
10k
100k
0.77
0.88
0.96
1
RZJ
̶
35
V
Rated voltage
symbol
221
M
Rated capacitance
Capacitance
symbol
tolerance symbol
H10 U ̶
Casing
symbol
Taping
symbol
RMJ
L
Series code
̶
35
Rated voltage
symbol
V
221
M
Rated capacitance
Capacitance
symbol
tolerance symbol
H10 U ̶
Casing
symbol
Taping
symbol
(C)
(P)
B±0.2
(C)
A±0.2
0.4±0.2
For Vibration Resistance Type (example : 35V220µF)
0.3 max.
φD±0.5
1k
Part numbering system
Series code
For Vibration Resistance Type
Inner vent (φ10 only)
120
Standard Type (example : 35V220µF)
(C)
φD±0.5
B±0.2
(C)
Inner vent (φ10 only)
0.4±0.2
Standard Type
Coefficient of Frequency for Rated Ripple Current
W
:Dummy terminal
( ) : Reference size
φD
6.3
8
10
L
7.7±0.3
10±0.5
10±0.5
A
6.6
8.4
10.4
B
6.6
8.4
10.4
C
2.7
3.0
3.3
W
0.5∼0.8
0.7∼1.1
0.7∼1.1
P
2.0
3.1
4.7
Casing symbol
F80
G10
H10
Refer to individual page.
(Soldering conditions, Land pattern size, The taping specifications)
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
RZJ, RMJ
VERTICAL CHIP TYPE ALUMINUM ELECTROLYTIC CAPACITORS
Standard Ratings
Rated voltag
(V)
Item
Rated
capacitance
(µF)
10
Case
φD×L(mm)
Initial ESR
(Ω max.)
16
After endurance test Rated ripple
ESR(Ω max.) current
20℃ -40℃ 20℃ -40℃ (mArms)
100
—
—
—
—
—
—
220
8×10
0.15
3.0
0.60
4.5
350
8×10
0.15
3.0
0.60
4.5
350
10×10
0.12
2.0
0.40
3.5
550
10×10
0.12
2.0
0.40
3.5
550
330
470
Rated voltag
(V)
Item
Rated
capacitance
(µF)
22
33
Case
φD×L(mm)
Initial ESR
(Ω max.)
20℃ -40℃ 20℃ -40℃ (mArms)
6.3×7.7
0.45
5.0
3.5
8×10
0.15
3.0
0.60
4.5
350
8×10
0.15
3.0
0.60
4.5
10×10
0.12
2.0
0.40
10×10
0.12
2.0
0.40
35
Case
φD×L(mm)
—
Initial ESR
(Ω max.)
—
40
220
After endurance test Rated ripple
ESR(Ω max.) current
20℃ -40℃ 20℃ -40℃ (mArms)
8×10
0.15
3.0
0.60
4.5
350
350
10×10
0.12
2.0
0.40
3.5
550
3.5
550
10×10
0.12
2.0
0.40
3.5
550
3.5
550
—
—
—
—
—
—
—
—
—
—
Case
φD×L(mm)
Initial ESR
(Ω max.)
After endurance test Rated ripple
ESR(Ω max.) current
20℃ -40℃ 20℃ -40℃ (mArms)
6.3×7.7
0.50
5.0
—
40
197
6.3×7.7
0.50
5.0
—
40
197
8×10
0.25
3.5
—
6
270
220
6.3×7.7
0.50
5.0
—
40
197
—
—
—
—
6.3×7.7
0.45
5.0
3.5
8×10
0.15
3.0
0.60
4.5
350
8×10
0.25
3.5
—
6
270
100
8×10
0.15
3.0
0.60
4.5
350
10×10
0.20
2.5
—
4.5
500
220
10×10
0.12
2.0
0.40
3.5
550
—
—
—
—
—
—
47
Case
φD×L(mm)
Initial ESR
(Ω max.)
50
After endurance test Rated ripple
ESR(Ω max.) current
20℃ -40℃ 20℃ -40℃ (mArms)
—
25
After endurance test Rated ripple
ESR(Ω max.) current
40
—
(Note) A
fter endurance test : 2000 hours
Rated ripple current : 125℃ , 100kHz, ESR : 100kHz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
RZF
RZF, RMF
®
CHIP TYPE
ALUMINUM ELECTROLYTIC
VERTICAL CHIPVERTICAL
TYPE ALUMINUM
ELECTROLYTIC
CAPACITORSCAPACITORS
GREEN
CAP
Chip Type, 125˚C Use, High CV, Long Life Capacitors
Compatible with surface mounting.
Supplied with carrier taping.
Guaranteed 4000 hours at 125°
C.
(1000 hours : φ6.3x5.8L-50V)
(2000 hours : φ6.3x5.8L-35V or less, φ6.3x7.7L)
SMD
Low ESR
125˚C
4000hours
Anticleaning
solvent
●
●
●
High CV, Long Life
RZF
RVT
Marking color : Black print
Specifications
Item
Performance
ー40 to +125
±20
Category temperature range (℃)
Tolerance at rated capacitance (%)
Leakage current (µA)
(max.)
(20℃,120Hz)
(20℃)
0.01CV or 3 whichever is larger (after 2 minutes) C : Rated capacitance (µF) ; V : Rated voltage (V)
10
0.24
Rated voltage (V)
tanδ
(max.)
Tangent of loss angle
(tanδ)
16
0.20
25
0.16
35
0.14
50
0.14
(20℃,120Hz)
Rated voltage (V)
Characteristics at high
and low temperature
10
3
6
Zー25℃/Z+20℃
Zー40℃/Z+20℃
Impedance ratio (max.)
16
2
4
25
2
4
35
2
3
50
2
3
(120Hz)
1000 hours (φ6.3x5.8L : 50V)
2000 hours (φ6.3x5.8L : 35V or less, φ6.3x7.7L)
4000 hours (φ8, φ10)
The initial specified value or less
Within ±30% of initial value
300% or less of the initial specified value
Test time
Endurance (125℃)
Leakage current
Percentage of capacitance change
Tangent of the loss angle
(Applied ripple current)
Shelf life (125℃)
Test time : 1000hours ; other items are same as the endurance. Voltage application treatment : According to JIS C5101-4 4.1
Applicable standards
JIS C5101 - 1,
- 18 (IEC 60384 - 1,
- 18)
Outline Drawing
Unit : mm
Coefficient of Frequency for Rated Ripple Current
0.3 max.
A±0.2
120
1k
10k
100k
0.77
0.88
0.96
1
Rated voltage(V)
10 to 50
Part numbering system
(C)
(P)
φD±0.5
B±0.2
(C)
Inner vent (φ10 only)
0.4±0.2
Frequency (Hz)
Standard Type
W
L
Standard Type (example : 35V100µF)
RZF
̶
0.3 max.
101
M
Rated capacitance
Capacitance
symbol
tolerance symbol
F80 U ̶
Casing
symbol
Taping
symbol
RMF
Series code
̶
25
Rated voltage
symbol
V
331
M
Rated capacitance
Capacitance
symbol
tolerance symbol
H10 U ̶
Casing
symbol
Taping
symbol
(C)
(P)
L
V
For Vibration Resistance Type (example : 25V330µF)
(C)
A±0.2
B±0.2
φD±0.5
Inner vent (φ10 only)
0.4±0.2
Series code
For Vibration Resistance Type
35
Rated voltage
symbol
W
:Dummy terminal
( ) : Reference size
φD
6.3
6.3
8
10
L
5.8±0.3
7.7±0.3
10±0.5
10±0.5
A
6.6
6.6
8.4
10.4
B
6.6
6.6
8.4
10.4
C
2.7
2.7
3.0
3.3
W
0.5 to 0.8
0.5 to 0.8
0.7 to 1.1
0.7 to 1.1
P
2.0
2.0
3.1
4.7
Casing symbol
F61
F80
G10
H10
Refer to individual page.
(Soldering conditions, Land pattern size, The taping specifications)
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
RZF, RMF
VERTICAL CHIP TYPE ALUMINUM ELECTROLYTIC CAPACITORS
Standard Ratings
Rated voltage
(V)
Rated
capacitance
(µF)
Item
10
Case
φD × L(mm)
47
—
16
ESR(Ω max.)
20℃
-40℃
—
—
100
6.3 × 5.8
1.2
22
12
Rated ripple
Case
current
(mArms) φD × L(mm)
25
ESR(Ω max.)
20℃
-40℃
Rated ripple
Case
current
(mArms) φD × L(mm)
ESR(Ω max.)
20℃
-40℃
Rated ripple
current
(mArms)
—
6.3 × 5.8
1.2
22
110
6.3 × 5.8
1.2
22
110
110
6.3 × 5.8
1.2
22
110
6.3 × 7.7
0.60
12
220
12
220
6.3 × 7.7
0.60
220
6.3 × 7.7
0.60
220
8 × 10
0.30
5.5
296
330
8 × 10
0.30
5.5
296
8 × 10
0.30
5.5
296
10 × 10
0.20
3.6
440
470
8 × 10
0.30
5.5
296
10 × 10
0.20
3.6
440
—
—
—
—
680
10 × 10
0.20
3.6
440
10 × 10
0.20
3.6
440
—
—
—
—
Rated voltage
(V)
Rated
capacitance
(µF)
Item
35
Case
φD × L(mm)
50
ESR(Ω max.)
20℃
-40℃
Rated ripple
Case
current
(mArms) φD × L(mm)
ESR(Ω max.)
20℃
-40℃
Rated ripple
current
(mArms)
22
—
—
—
—
6.3 × 5.8
3.2
48
58
33
—
—
—
—
6.3 × 5.8
3.2
48
58
47
6.3 × 5.8
1.2
22
110
6.3 × 7.7
1.2
18
100
6.3 × 7.7
0.60
12
220
8 × 10
0.50
7.5
180
220
8 × 10
0.30
5.5
296
10 × 10
0.30
4.5
280
330
10 × 10
0.20
3.6
440
—
—
—
—
95
(Note) Rated ripple current : 125℃ , 100kHz
ESR : 100kHz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
RZE
RZE, RME
VERTICAL
CHIP TYPE
ALUMINUM ELECTROLYTIC
VERTICAL CHIP TYPE
ALUMINUM
ELECTROLYTIC
CAPACITORSCAPACITORS
GREEN
CAP
Chip Type, 125˚C Use, High CV, Long Life Capacitors
●
●
●
SMD
Low ESR
125˚C
2000hours
®
Anticleaning
solvent
Compatible with surface mounting.
Supplied with carrier taping.
Guaranteed 2000 hours at 125°
C.
High CV, Long Life
RZE
RVT
Marking color : Black print
Specifications
Item
Performance
ー40 to +125
±20
Category temperature range (℃)
Tolerance at rated capacitance (%)
Leakage current (µA)
(max.)
(20℃,120Hz)
(20℃)
0.01CV or 3 whichever is larger (after 2 minutes) C : Rated capacitance (µF) ; V : Rated voltage (V)
35
0.14
Rated voltage (V)
tanδ
(max.)
Tangent of loss angle
(tanδ)
(20℃,120Hz)
Rated voltage (V)
Characteristics at high
Impedance Ratio (max.)
and low temperature
35
2
3
Zー25℃/Z+20℃
Zー40℃/Z+20℃
(120Hz)
2000 hours
The initial specified value or less
Within ±30% of initial value
300% or less of the initial specified value
Test time
Leakage current
Percentage of capacitance change
Tangent of the loss angle
Endurance (125℃)
(Applied ripple current)
Shelf life (125℃)
Test time : 1000hours ; other items are same as the endurance. Voltage application treatment : According to JIS C5101-4 4.1
Applicable standards
JIS C5101 - 1,
- 18 (IEC 60384 - 1,
- 18)
Coefficient of Frequency for Rated Ripple Current
Frequency (Hz)
Rated voltage(V)
35
Part numbering system
120
1k
10k
100k
0.77
0.88
0.96
1
Standard Type (example : 35V47µF)
RZE
Refer to individual page.
(Soldering conditions, Land pattern size, The taping specifications)
̶
35
V
Rated voltage
symbol
Series code
470
M
F80 U ̶
Rated capacitance
Capacitance
symbol
tolerance symbol
Casing
symbol
Taping
symbol
For Vibration Resistance Type (example : 35V47µF)
RME
̶
35
V
Rated voltage
symbol
Series code
470
M
F80 U ̶
Rated capacitance
Capacitance
symbol
tolerance symbol
Casing
symbol
Taping
symbol
Outline Drawing
W
L
L
( ) : Reference size
φD
6.3
L
7.7±0.3
A
6.6
B
6.6
C
2.7
W
0.5 to 0.8
P
2.0
Casing symbol
F80
(C)
(P)
(C)
φD±0.5
(C)
(P)
B±0.2
φD±0.5
A±0.2
0.4±0.2
0.3 max.
(C)
A±0.2
B±0.2
0.3 max.
Unit : mm
For Vibration Resistance Type
0.4±0.2
Standard Type
W
:Dummy terminal
Standard Ratings
Rated voltage
(V)
Rated
capacitance
(µF)
Item
35
φD × L(mm)
Rated ripple
current
After Endurance -40℃ (mArms)
ESR(Ω max.)
Case
20℃
-40℃
47
6.3 × 7.7
0.30
3
6
240
100
6.3 × 7.7
0.30
3
6
240
(Note) Rated ripple current : 125℃ , 100kHz
ESR : 100kHz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
RVX
RVX, RTX
CHIP TYPE
ALUMINUM ELECTROLYTIC
VERTICAL CHIPVERTICAL
TYPE ALUMINUM
ELECTROLYTIC
CAPACITORSCAPACITORS
Chip Type, 135°C Capacitors
●
●
●
GREEN
CAP
135˚C
SMD
1000hours
Compatible with surface mounting.
Supplied with carrier taping.
Guarantees 1000 hours 135℃.
®
Anticleaning
solvent
RVX
High temperature
RVT
Marking color : Black print
Specifications
Item
Performance
ー40 to +135
±20
Category temperature range (℃)
Tolerance at rated capacitance (%)
Leakage current (µA)
(max.)
(20℃,120Hz)
(20℃)
0.01CV or 3 whichever is larger (after 2 minutes) C : Rated capacitance (µF) ; V : Rated voltage (V)
25
0.24
Rated voltage (V)
tanδ (max.)
Tangent of loss angle
(tanδ)
35
0.20
(20℃,120Hz)
25
2
3
Rated voltage (V)
Characteristics at high
Impedance Ratio (max.)
and low temperature
Zー25℃/Z+20℃
Zー40℃/Z+20℃
35
2
3
(120Hz)
1000 hours
The initial specified value or less
Within 30% of initial value
300% or less of the initial specified value
Test time
Leakage current
Percentage of Capacitance change
Tangent of loss angle
Endurance (135℃)
(Applied ripple current)
Shelf life (135℃)
Test time : 500hours ; other items are same as the endurance. Voltage application treatment : According to JIS C5101-4 4.1
Applicable standards
JIS C5101 - 1,
- 18 (IEC 60384 - 1,
- 18)
Part numbering system (example : 25V330µF)
Coefficient of Frequency for Rated Ripple Current
Frequency (Hz)
Rated voltage(V)
25 to 35
120
1k
10k
100k
0.77
0.88
0.96
1
Standard Type
RVX
̶
Refer to individual page.
(Soldering conditions, Land pattern size, The taping specifications)
25
V
Rated voltage
symbol
Series code
331
M
H10 U ̶
Rated capacitance
Capacitance
symbol
tolerance symbol
Casing
symbol
Taping
symbol
For Vibration Resistance Type
RTX
̶
25
V
Rated voltage
symbol
Series code
331
M
H10 U ̶
Rated capacitance
Capacitance
symbol
tolerance symbol
Casing
symbol
Taping
symbol
Outline Drawing
W
L
L
(C)
W
( ) : Reference size
φD
8
10
L
10±0.5
10±0.5
A
8.4
10.4
B
8.4
10.4
W
0.7 to 1.1
0.7 to 1.1
C
3.0
3.3
P
3.1
4.7
(C)
φD±0.5
A±0.2
(C)
(P)
B±0.2
φD±0.5
0.3Max.
0.4±0.2
Inner vent (φ10 only)
(P)
A±0.2
(C)
Inner vent (φ10 only)
Unit : mm
For Vibration Resistance Type
B±0.2
0.3 max.
0.4±0.2
Standard Type
:Dummy terminal
Casing symbol
G10
H10
Standard Ratings
Rated voltage
(V)
Rated
capacitance
(µF)
22
33
47
100
220
330
Item
25
Case
35
ESR
Rated ripple
Case
current
(mArms) φD × L(mm)
Casing
symbol
ESR
Rated ripple
current
(mArms)
Casing
symbol
(Ω max.)
—
—
—
8 × 10
G10
0.70
115
G10
0.70
115
8 × 10
G10
0.70
115
10 × 10
H10
0.50
155
10 × 10
H10
0.50
155
8 × 10
G10
0.70
115
8 × 10
G10
0.70
115
10 × 10
H10
0.50
155
10 × 10
H10
0.50
155
φD × L(mm)
—
8 × 10
(Ω max.)
8 × 10
G10
0.70
115
8 × 10
G10
0.70
115
10 × 10
H10
0.50
155
10 × 10
H10
0.50
155
10 × 10
H10
0.50
155
—
—
—
8 × 10
G10
0.70
115
10 × 10
H10
0.50
155
10 × 10
H10
0.50
155
—
(Note)Rated ripple current : 135℃ , 100kHz
ESR : 20℃,100kHz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
RVE
®
VERTICAL CHIP
TYPE ALUMINUM
CAPACITORSCAPACITORS
VERTICAL
CHIP TYPEELECTROLYTIC
ALUMINUM ELECTROLYTIC
GREEN
CAP
Chip type 105°C Capacitors(height:4.5mm)
●
●
●
105˚C
SMD
1000hours
RVE
Anticleaning
solvent
Compatible with surface mounting for 4.5mm height capacitors.
Supplied with carrier taping.
Guarantees 1000 hours 105℃.
High temperature
RVE
RV4
Marking color : Black print
Specifications
Performance
ー40 to +105
±20
Item
Category temperature range (℃)
Tolerance at rated capacitance (%)
Leakage current (µA)
(max.)
(20℃,120Hz)
0.01CV or 3 whichever is larger (after 2 minutes) C : Rated capacitance (μF), V : Rated voltage (V)
Rated voltage (V)
tanδ (max.)
Tangent of loss angle
(tanδ)
6.3
0.38
10
0.32
16
0.20
25
0.16
(20℃)
35
0.14
50
0.14
(20℃,120Hz)
Rated voltage (V)
Characteristics at high
and low temperature
6.3
4
10
Zー25℃/Z+20℃
Zー40℃/Z+20℃
Impedance ratio (max.)
10
3
8
16
2
6
25
2
4
35
2
3
50
2
3
(120Hz)
1000 hours
The initial specified value or less
Within ±20% of initial value (16WV or less :±25%)
300% or less of the initial specified value
Test time
Leakage current
Percentage of capacitance change
Tangent of loss angle
Endurance (105℃)
(Applied ripple current)
Shelf life (105℃)
Test time : 500hours ; other items are same as the endurance. Voltage application treatment : According to JIS C5101-4 4.1
Applicable standards
JIS C5101 - 1,
- 18 (IEC 60384 - 1,
- 18)
Outline Drawing
Coefficient of Frequency for Rated Ripple Current
Unit : mm
Frequency (Hz)
Rated voltage (V)
6.3 to 16
25 to 35
50
(P)
B±0.2
φD±0.5
(C)
A±0.2
0.4±0.2
0.3 max.
(C)
RVE
( ) : Reference size
φD
6.3
L
4.5 +0.1
−0.2
120
1k
10k・100k
0.80
0.80
0.70
1
1
1
1.15
1.25
1.35
1.25
1.40
1.50
Part numbering system (example : 6.3V100µF)
W
L
50・60
A
B
C
W
P
Casing symbol
6.6
6.6
2.7
0.5 to 0.8
2.0
F46
̶
6
V
Rated voltage
symbol
Series code
101
M
Rated capacitance
Capacitance
symbol
tolerance symbol
F46 U ̶
Casing
symbol
Taping
symbol
Refer to individual page.
(Soldering conditions, Land pattern size, The taping specifications)
Standard Ratings
Rated voltage (V)
Item
Case
φD(mm)
6.3
Case
symbol
F46
6.3
10
16
25
35
50
Rated
capacitance
Rated ripple current
Rated
capacitance
Rated ripple current
Rated
capacitance
Rated ripple current
Rated
capacitance
Rated ripple current
Rated
capacitance
Rated ripple current
Rated
capacitance
Rated ripple current
(µF)
(mArms)
(µF)
(mArms)
(µF)
(mArms)
(µF)
(mArms)
(µF)
(mArms)
(µF)
(mArms)
33
35
22
33
47
44
33
42
22
36
10
26
100
52
47
40
(Note) Rated ripple current : 105℃ , 120Hz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
RVⅠ
®
VERTICAL CHIP TYPE
ALUMINUM
ELECTROLYTIC
VERTICAL
CHIP TYPE
ALUMINUMCAPACITORS
ELECTROLYTIC CAPACITORS
GREEN
CAP
Chip Type 105˚C Use, Long Life Bipolar Capacitors
●
●
●
SMD
105˚C
2000hours
RVⅠ
Anticleaning
solvent
Compatible with surface mounting.
Supplied with carrier taping.
Guarantees 2000 hours 105℃.
Long life
RVI
RVP
Marking color : Black print
Specifications
Item
Performance
ー40 to +105
±20
Category temperature range (℃)
Tolerance at rated capacitance (%)
Leakage current (µA)
(max.)
(20℃,120Hz)
(20℃)
0.01CV or 3 whichever is larger (after 2 minutes) C : Rated capacitance (µF) , V : Rated voltage (V)
Rated voltage (V)
tanδ (max.)
Tangent of loss angle
(tanδ)
6.3
0.30
10
0.22
16
0.16
25
0.14
35
0.12
50
0.12
6.3
4
8
10
3
6
16
2
4
25
2
4
35
2
3
50
2
3
(20℃,120Hz)
Rated voltage (V)
Z−25℃/Z+20℃
Impedance ratio (max.)
Z−40℃/Z+20℃
Characteristics at high
and low temperature
(120Hz)
Test time
Leakage current
Percentage of capacitance change
Tangent of loss angle
Endurance (105℃)
(Applied ripple current)
2000 hours (with the polarity inverted every 250 hours)
The initial specified value or less
Within ±20% of initial value
200% or less of the initial specified value
Shelf life (105℃)
Test time : 1000hours ; other items are same as the endurance. Voltage application treatment : According to JIS C5101-4 4.1
Applicable standards
JIS C5101 - 1,- 18 (IEC 60384 - 1,- 18)
Outline Drawing
Unit : mm
Coefficient of Frequency for Rated Ripple Current
Frequency (Hz)
(C)
( ) : Reference size
φD
4
5
6.3
L
5.8±0.3
5.8±0.3
5.8±0.3
A
4.3
5.3
6.6
B
4.3
5.3
6.6
C
2.0
2.3
2.7
50・60
120
1k
10k・100k
0.80
0.80
0.50
0.70
1
1
1
1
1.15
1.25
1.35
1.35
1.25
1.40
1.50
1.50
W
0.5 to 0.8
0.5 to 0.8
0.5 to 0.8
Part numbering system (example : 6.3V47µF)
RVⅠ ̶
W
L
50
6.3 to 16
25 to 35
1 to 3.3μF
4.7μF
(P)
B±0.2
φD±0.5
(C)
A±0.2
Rated voltage (V)
0.4±0.2
0.3 max.
P
1.0
1.5
2.0
Casing symbol
D61
E61
F61
Series code
6
Rated voltage
symbol
V
470
M
Rated
capacitance
symbol
Capacitance
tolerance symbol
F61 U ̶
Casing
symbol
Taping
symbol
Refer to individual page.
(Soldering conditions, Land pattern size, The taping specifications)
Standard Ratings
Rated voltage (V)
Rated
capacitance (µF)
1
2.2
3.3
4.7
10
22
33
47
Item
6.3
10
16
25
35
50
Rated ripple current
Rated ripple current
Rated ripple current
Rated ripple current
Rated ripple current
Rated ripple current
Case
Case
Case
Case
Case
Case
φD×L (mm) (mArms) φD×L (mm) (mArms) φD×L (mm) (mArms) φD×L (mm) (mArms) φD×L (mm) (mArms) φD×L (mm) (mArms)
ー
ー
ー
ー
ー
ー
ー
ー
ー
ー
4×5.8
10
ー
ー
ー
ー
ー
ー
ー
ー
4×5.8
10
ー
ー
5×5.8
17
ー
ー
ー
ー
ー
ー
4×5.8
12
ー
ー
6.3×5.8
20
ー
ー
ー
ー
ー
ー
4×5.8
12
ー
ー
6.3×5.8
23
ー
ー
4×5.8
20
5×5.8
25
6.3×5.8
28
ー
ー
ー
ー
ー
ー
ー
ー
ー
ー
6.3×5.8
55
ー
ー
ー
ー
ー
ー
6.3×5.8
41
ー
ー
ー
ー
ー
ー
ー
ー
6.3×5.8
45
ー
ー
ー
ー
ー
ー
ー
ー
ー
ー
(Note) Rated ripple current : 105℃, 120Hz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
CHIP TYPE ALUMINUM ELECTROLYTIC CAPACITORS
For Vibration Resistance,
AAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
Chip Type Aluminum Electrolytic Capacitors
CAT.No.2021/2022
RTZ
®
VERTICAL CHIP
TYPE ALUMINUM
ELECTROLYTIC
CAPACITORS CAPACITORS
VERTICAL
CHIP TYPE
ALUMINUM ELECTROLYTIC
GREEN
CAP
Chip Type 105˚C Use, Low ESR, For Vibration Capacitors
Compatible with surface mounting.
For Vibration resistance. (30G guaranteed)
Supplied with carrier taping.
Guaranteed 5000 hours at 105℃.
(φ6.3 : 1000 hours, φ8, φ10 : 2000 hours)
SMD
Vibration
Resistance
Low
ESR
RTZ
105˚C
5000hours
Anticleaning
solvent
●
●
●
●
Vibration resistance
RTZ
RVZ
Marking color : Black print
Specifications
Item
Performance
ー55 to +105
±20
Category temperature range (℃)
Tolerance at rated capacitance (%)
Leakage current (µA)
(max.)
(20℃,120Hz)
(20℃)
0.01CV or 3 whichever is larger (after 2 minutes) C : Rated capacitance (µF) , V : Rated voltage (V)
Rated voltage (V)
tanδ (max.)
Tangent of loss angle
(tanδ)
6.3
0.28
10
0.24
16
0.20
25
0.16
35
0.14
6.3
4
8
10
3
5
16
2
4
25
2
3
35
2
3
(20℃,120Hz)
0.02 is added to every 1000µF increase over 1000µF
Rated voltage (V)
Z−25℃/Z+20℃
Impedance ratio (max.)
Z−55℃/Z+20℃
Characteristics at high
and low temperature
(120Hz)
1000 hours (φ6.3)
2000 hours (φ8, φ10)
5000 hours (φ12.5 or more)
The initial specified value or less
Within ±25% of initial value
200% or less of the initial specified value
Test time
Endurance (105℃)
(Applied ripple current)
Leakage current
Percentage of capacitance change
Tangent of loss angle
Shelf life (105℃)
Applicable standards
Test time : 1000hours ; other items are same as the endurance. Voltage application treatment : According to JIS C5101-4 4.1
JIS C5101 - 1,- 18 (IEC 60384 - 1,- 18)
Outline Drawing
Unit : mm
Coefficient of Frequency for Rated Ripple Current
Frequency (Hz)
6.3 to 35
(C)
(P)
W
( ) : Reference size
L
5.8±0.3
7.7±0.3
10±0.5
10.5±0.5
10±0.5
10.5±0.5
13.5±0.5
16.5±0.5
21.5±0.5
16.5±0.5
21.5±0.5
A
6.6
6.6
8.4
8.4
10.4
10.4
13.0
17.0
17.0
19.0
19.0
B
6.6
6.6
8.4
8.4
10.4
10.4
13.0
17.0
17.0
19.0
19.0
C
2.7
2.7
3.0
3.0
3.3
3.3
4.9
5.6
5.6
6.6
6.6
W
0.5 to 0.8
0.5 to 0.8
0.7 to 1.1
0.7 to 1.1
0.7 to 1.1
0.7 to 1.1
1.0 to 1.4
1.0 to 1.4
1.0 to 1.4
1.0 to 1.4
1.0 to 1.4
P
2.0
2.0
3.1
3.1
4.7
4.7
4.6
7.2
7.2
7.2
7.2
10k
100k
0.90
1
φ6.3 (example : 6.3V220µF)
: Dummy terminal
φD
6.3
6.3
8
8
10
10
12.5
16
16
18
18
1k
0.75
Part numbering system
RTZ
̶
M
Casing symbol
0.4±0.2
F61
0.4±0.2
F80
0.4±0.2
G10
0.4±0.2
GA5
H10
0.4±0.2
0.4±0.2
HA5
0.7±0.3
ⅠE
0.7±0.3
JH
0.7±0.3
JM
0.7±0.3
KH
0.7±0.3
KM
6
V
Rated voltage
symbol
Series code
L
120
0.50
Rated voltage (V)
(C)
A±0.2
B±0.2
φD±0.5
0.3 max.
M
Inner vent (φ10 or more)
221
M
Rated
capacitance
symbol
Capacitance
tolerance symbol
F61 U ̶
Casing
symbol
Taping
symbol
φ8, φ10 (example : 6.3V1500µF)
RTZ
̶
6
V
Rated voltage
symbol
Series code
152
M
Rated
capacitance
symbol
Capacitance
tolerance symbol
HA5 SU ̶
Casing
symbol
Taping
symbol
φ12.5 or more (example : 6.3V2200µF)
RTZ
Series code
̶
6
Rated voltage
symbol
V
222
M
ⅠE
T ̶ R5
Rated
capacitance
symbol
Capacitance
tolerance symbol
Casing
symbol
Taping
symbol
* If "Standard (terminal)" type is required, please see the series RVZ.
Refer to individual page.
(Soldering conditions, Land pattern size, The taping specifications)
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
RTZ
VERTICAL CHIP TYPE ALUMINUM ELECTROLYTIC CAPACITORS
Standard Ratings
Rated voltage
(V)
6.3
10
16
25
35
Rated ripple
Rated ripple
Rated ripple
Rated ripple
Rated ripple
ESR
ESR
ESR
ESR
ESR
Case
Case
Case
Case
Case
Item
Rated
Casing
Casing
Casing
Casing
Casing
current
current
current
current
current
capacitance
φD × L (mm) symbol ( Ω max.) (mArms) φD × L (mm) symbol ( Ω max.) (mArms) φD × L (mm) symbol ( Ω max.) (mArms) φD × L (mm) symbol ( Ω max.) (mArms) φD × L (mm) symbol ( Ω max.) (mArms)
(µF)
33
—
—
47
—
—
68
6.3×5.8
F61
100
6.3×5.8
F61
150
220
330
470
680
1000
—
—
—
—
—
—
—
6.3×5.8
F61
0.44
230
0.44
230
6.3×5.8
F61
0.44
230
6.3×5.8
F61
0.44
230
6.3×5.8
F61
0.44
230
0.44
230
6.3×5.8
F61
0.44
230
6.3×5.8
F61
0.44
230
6.3×5.8
F61
0.44
230
0.44
230
6.3×5.8
F61
0.44
230
6.3×5.8
F61
0.44
230
6.3×7.7
F80
0.34
280
8×10
G10
0.20
450
F61
0.44
230
6.3×5.8
F61
0.44
230
6.3×7.7
F80
0.34
280
6.3×5.8
F61
0.44
230
6.3×7.7
F80
0.34
280
6.3×7.7
F80
0.34
280
6.3×7.7
F80
0.34
280
8×10
G10
0.20
450
8×10
G10
0.20
450
6.3×7.7
F80
0.34
280
8×10.5
GA5
0.17
450
8×10.5
GA5
0.17
450
8×10
G10
0.20
450
H10
0.10
670
H10
0.10
670
8×10.5
GA5
0.17
450
GA5
0.17
450
GA5
0.17
450
H10
0.10
670
10×10
H10
0.10
670
10×10
H10
0.10
670
8×10.5
GA5
0.17
450
10×10.5
HA5
0.090
670
10×10.5
HA5
0.090
8×10.5
GA5
0.17
450
670
HA5
0.090
670
ⅠE
0.10
10×10.5
12.5×13.5
H10
16×16.5
JH
12.5×13.5
ⅠE
0.060
1100
12.5×13.5
ⅠE
16×16.5
JH
0.046
1540
16×16.5
12.5×13.5
ⅠE
0.060
1100
16×16.5
JH
0.046
1540
16×16.5
JH
0.046
1540
16×21.5
18×16.5
KH
0.042
1760
18×16.5
18×21.5
10×10
F61
—
6.3×5.8
10×10
6.3×5.8
1500
10×10.5
HA5
0.090
670
2200
12.5×13.5
ⅠE
0.060
1100
3300
16×16.5
JH
0.046
1540
10×10
8×10.5
8×10.5
GA5
0.17
450
8×10.5
GA5
0.17
450
F61
0.44
230
F61
0.44
230
6.3×7.7
F80
0.34
280
6.3×7.7
F80
0.34
280
8×10
G10
0.20
450
8×10.5
GA5
0.17
450
8×10.5
GA5
0.17
450
10×10
H10
0.10
670
GA5
0.17
450
10×10
H10
0.10
670
10×10.5
HA5
0.090
670
12.5×13.5
ⅠE
0.060
1100
16×16.5
JH
0.046
1540
12.5×13.5
ⅠE
0.060
1100
16×16.5
JH
0.046
1540
8×10.5
H10
0.10
670
GA5
0.17
450
10×10
H10
0.10
670
10×10.5
HA5
0.090
670
670
12.5×13.5
ⅠE
0.060
1100
0.060
1100
12.5×13.5
ⅠE
0.060
1100
16×16.5
JH
0.046
1540
0.046
1540
16×16.5
JH
0.046
1540
18×16.5
KH
0.042
1760
0.060
1100
16×21.5
JM
0.040
1840
JH
0.046
1540
18×16.5
KH
0.042
1760
—
—
—
16×16.5
JH
0.046
1540
16×21.5
JM
0.040
1840
18×16.5
KH
0.042
1760
18×16.5
KH
0.042
1760
KM
0.038
1960
JM
0.040
1840
KH
0.042
1760
18×21.5
KM
0.038
1960
—
—
—
—
KM
0.038
1960
—
—
—
—
—
—
—
—
10×10
8×10.5
10×10
6.3×5.8
6.3×5.8
8×10.5
—
18×21.5
16×21.5
JM
0.040
1840
16×21.5
JM
0.040
1840
18×16.5
KH
0.042
1760
18×21.5
KM
0.038
1960
6800
18×21.5
KM
0.038
1960
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
8200
18×21.5
KM
0.038
1960
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
4700
(Note)Rated ripple current : 105℃ , 100kHz
ESR : 20℃ , 100kHz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
RTD
®
VERTICAL CHIP
TYPE ALUMINUM
CAPACITORSCAPACITORS
VERTICAL
CHIP TYPEELECTROLYTIC
ALUMINUM ELECTROLYTIC
Chip Type 105˚C Use, Low ESR, Long Life, For Vibration Capacitors
Compatible with surface mounting.
• For Vibration resistance. (30G guaranteed)
Supplied with carrier taping.
Guaranteed 2000 hours at 105°
C.
(6.3V to 50V 10.0L : 5000 hours)
(φ12.5 or more:5000 hours)
GREEN
CAP
SMD
Vibration
Resistance
RTD
Low
ESR
105˚C
5000hours
Anticleaning
solvent
●
●
●
Vibration resistance
RTD
RVD
Specifications
Marking color : Black print
Item
Performance
ー55 to +105
±20
Category temperature range (℃)
Tolerance at rated capacitance (%)
Leakage current (µA)
(max.)
(20℃,120Hz)
(20℃)
0.01CV or 3 whichever is larger (after 2 minutes) C : Rated capacitance (µF) , V : Rated voltage (V)
6.3
0.26
Rated voltage (V)
tanδ (max.)
Tangent of loss angle
(tanδ)
16
0.16
10
0.19
35
0.12
25
0.14
50
0.1
63
0.08
100
0.07
80
0.08
(20℃,120Hz)
0.02 is added to every 1000µF increase over 1000µF
Rated voltage (V)
Z−25℃/Z+20℃
Impedance ratio (max.)
Z−40℃/Z+20℃
Z−55℃/Z+20℃
Characteristics at high
and low temperature
6.3
2
3
8
16
2
3
4
10
2
3
4
35
2
3
3
25
2
3
3
63
2
3
3
50
2
3
3
100
2
3
3
80
2
3
3
(120Hz)
Test time
Leakage current
Percentage of capacitance change
Tangent of loss angle
Endurance (105℃)
(Applied ripple current)
Shelf life (105℃)
Applicable standards
2000 hours (φ12.5 or more, 6.3V to 50V 10.0L : 5000 hours)
The initial specified value or less
Within ±30% of initial value
200% or less of the initial specified value (φ12.5 or more, 6.3V to 50V 10.0L : 300%)
Test time : 1000hours ; other items are same as the endurance. Voltage application treatment : According to JIS C5101-4 4.1
JIS C5101-1, -18 (IEC 60384-1, -18)
Outline Drawing
Unit : mm
Coefficient of Frequency for Rated Ripple Current
Frequency (Hz)
Rated voltage (V)
6.3 to 100
(C)
A±0.2
W
: Dummy terminal
( ) : Reference size
φD
6.3
6.3
8
10
12.5
16
16
18
18
L
5.8±0.3
7.7±0.3
10±0.5
10±0.5
13.5±0.5
16.5±0.5
21.5±0.5
16.5±0.5
21.5±0.5
A
6.6
6.6
8.4
10.4
13.0
17.0
17.0
19.0
19.0
B
6.6
6.6
8.4
10.4
13.0
17.0
17.0
19.0
19.0
C
2.7
2.7
3.0
3.3
4.9
5.6
5.6
6.6
6.6
0.5
0.5
0.7
0.7
1.0
1.0
1.0
1.0
1.0
W
to 0.8
to 0.8
to 1.1
to 1.1
to 1.4
to 1.4
to 1.4
to 1.4
to 1.4
P
2.0
2.0
3.1
4.7
4.6
7.2
7.2
7.2
7.2
120
1k
10k・100k
0.50
0.50
0.75
1
Part numbering system
RTD
̶
M
Casing symbol
0.4±0.2
F61
0.4±0.2
F80
0.4±0.2
G10
H10
0.4±0.2
0.7±0.3
ⅠE
0.7±0.3
JH
0.7±0.3
JM
0.7±0.3
KH
0.7±0.3
KM
6
V
Rated voltage
symbol
Series code
L
50・60
φ6.3 (example : 6.3V220µF)
(C)
(P)
B±0.2
φD±0.5
0.3 max.
M
Inner vent (φ10 or more)
221
M
Rated
capacitance
symbol
Capacitance
tolerance symbol
F61 U ̶
Casing
symbol
Taping
symbol
φ8, φ10 (example : 6.3V1500µF)
RTD
̶
6
V
Rated voltage
symbol
Series code
152
M
Rated
capacitance
symbol
Capacitance
tolerance symbol
H10 SU ̶
Casing
symbol
Taping
symbol
φ12.5 or more (example : 6.3V2200µF)
RTD
Series code
̶
6
Rated voltage
symbol
V
222
M
ⅠE
T ̶ R5
Rated
capacitance
symbol
Capacitance
tolerance symbol
Casing
symbol
Taping
symbol
*If "Standard (terminal)" type is required, please see the series RVD.
Refer to individual page.
(Soldering conditions, Land pattern size, The taping specifications)
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
RTD
VERTICAL CHIP TYPE ALUMINUM ELECTROLYTIC CAPACITORS
Standard Ratings
Rated voltage
(V)
6.3
10
16
25
35
Rated ripple
Rated ripple
Rated ripple
Rated ripple
Rated ripple
ESR
ESR
ESR
ESR
ESR
Case
Case
Case
Case
Case
Item
Rated
Casing
Casing
Casing
Casing
Casing
current
current
current
current
current
capacitance
φD × L (mm) symbol ( Ω max.) (mArms) φD × L (mm) symbol ( Ω max.) (mArms) φD × L (mm) symbol ( Ω max.) (mArms) φD × L (mm) symbol ( Ω max.) (mArms) φD × L (mm) symbol ( Ω max.) (mArms)
(µF)
33
-
-
-
-
-
-
-
-
-
-
47
-
-
-
-
-
-
-
-
6.3×5.8
F61
100
-
-
220
6.3×5.8
F61
330
6.3×7.7
-
-
0.36
-
6.3×5.8
F61
0.36
250
6.3×5.8
F61
0.36
250
250
6.3×5.8
F61
0.36
250
6.3×5.8
F61
0.36
250
6.3×7.7
F80
0.30
300
8×10
G10
0.16
600
-
6.3×5.8
F61
0.36
250
6.3×7.7
F80
0.30
300
0.30
300
6.3×7.7
F80
0.30
300
8×10
G10
0.16
600
8×10
G10
0.16
600
G10
0.16
600
8×10
G10
0.16
600
8×10
G10
0.16
600
10×10
H10
0.090
850
-
-
-
-
0.36
250
6.3×7.7
F80
F80
0.30
300
8×10
470
8×10
G10
0.16
600
8×10
G10
0.16
600
8×10
G10
0.16
600
10×10
H10
0.090
850
12.5×13.5
ⅠE
0.054
1160
680
8×10
G10
0.16
600
10×10
H10
0.090
850
10×10
H10
0.090
850
12.5×13.5
ⅠE
0.054
1160
12.5×13.5
ⅠE
0.054
1160
1000
8×10
G10
0.16
600
10×10
H10
0.090
850
12.5×13.5
ⅠE
0.054
1160
12.5×13.5
ⅠE
0.054
1160
16×16.5
JH
0.044
1620
1500
10×10
H10
0.090
850
12.5×13.5
ⅠE
0.054
1160
12.5×13.5
ⅠE
0.054
1160
16×16.5
JH
0.044
1620
18×16.5
KH
0.040
1840
2200
12.5×13.5
ⅠE
0.054
1160
12.5×13.5
ⅠE
0.054
1160
18×21.5
KM
0.036
2080
3300
16×16.5
JH
0.044
1620
16×16.5
JH
0.044
1620
18×21.5
16×16.5
JH
0.044
1620
16×21.5
JM
0.038
1920
18×16.5
KH
0.040
1840
18×16.5
KH
0.040
1840
18×21.5
KM
0.036
2080
16×21.5
JM
0.038
1920
18×16.5
KH
0.040
1840
18×21.5
-
-
-
-
-
-
-
-
4700
18×16.5
KH
0.040
1840
KM
0.036
2080
KM
0.036
2080
-
-
-
-
-
-
-
-
6800
18×16.5
KH
0.040
1840
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
8200
18×21.5
KM
0.036
2080
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Rated voltage
(V)
50
63
80
100
Rated ripple
Rated ripple
Rated ripple
Rated ripple
ESR
ESR
ESR
ESR
Case
Case
Case
Case
Item
Rated
Casing
Casing
Casing
Casing
current
current
current
current
capacitance
φD × L (mm) symbol ( Ω max.) (mArms) φD × L (mm) symbol ( Ω max.) (mArms) φD × L (mm) symbol ( Ω max.) (mArms) φD × L (mm) symbol ( Ω max.) (mArms)
(µF)
10
6.3×5.8
F61
0.86
170
-
-
-
-
-
-
-
-
-
-
-
-
22
6.3×5.8
F61
0.86
170
-
-
-
-
8×10
G10
0.90
130
8×10
G10
1.30
130
33
6.3×7.7
F80
0.66
195
8×10
G10
0.65
250
8×10
G10
0.90
130
10×10
H10
0.70
200
47
6.3×7.7
F80
0.66
195
8×10
G10
0.65
250
10×10
H10
0.50
200
-
-
-
-
68
-
-
-
8×10
G10
0.65
250
-
-
-
-
-
-
-
-
10×10
H10
0.35
400
12.5×13.5
ⅠE
0.16
600
12.5×13.5
ⅠE
0.18
550
16×16.5
JH
0.17
700
-
8×10
G10
0.32
350
220
10×10
H10
0.18
700
12.5×13.5
ⅠE
0.16
600
16×16.5
JH
0.16
720
18×16.5
KH
0.15
800
330
12.5×13.5
ⅠE
0.12
900
16×16.5
JH
0.14
800
18×16.5
KH
0.13
830
18×21.5
KM
0.13
940
470
16×16.5
JH
0.080
1000
18×16.5
KH
0.12
900
18×21.5
KM
0.11
1000
-
-
-
-
680
16×16.5
JH
0.080
1000
18×21.5
KM
0.10
1050
-
-
-
-
-
-
-
-
1000
18×16.5
KH
0.076
1100
-
-
-
-
-
-
-
-
-
-
-
100
-
(Note)R
ated ripple current : 105℃ , 100kHz
ESR : 20℃ , 100kHz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
RTT
®
RTT
VERTICAL CHIP
TYPE ALUMINUM
ELECTROLYTIC
CAPACITORS CAPACITORS
VERTICAL
CHIP TYPE
ALUMINUM ELECTROLYTIC
Chip Type 125˚C Use, Low ESR, For Vibration Capacitors
Compatible with surface mounting.
For Vibration resistance. (30G guaranteed)
Supplied with carrier taping.
Guaranteed 1000 to 5000 hours at 125°
C.
(See table below)
GREEN
CAP
SMD
Vibration
Resistance
Low ESR
125˚C
5000hours
Anticleaning
solvent
●
●
●
●
Vibration resistance
RTT
RVT
Marking color : Black print
Specifications
Item
Performance
ー40 to +125
±20
Category temperature range (℃)
Tolerance at rated capacitance (%)
Leakage current (µA)
(max.)
(20℃,120Hz)
(20℃)
0.01CV or 3 whichever is larger (after 2 minutes) C : Rated capacitance (µF) , V : Rated voltage (V)
Rated voltage (V)
Tangent of loss angle
Tangent of loss angle
(tanδ)
10
0.24
16
0.20
25
0.16
35
0.14
50
0.14
63
0.12
80
0.12
100
0.10
10
3
4
16
2
3
25
2
3
35
2
3
50
2
3
63
2
3
80
2
3
100
2
3
0.02 is added to every 1000µF increase over 1000µF
Rated voltage (V)
Z−25℃/Z+20℃
Impedance ratio (max.)
Z−40℃/Z+20℃
Characteristics at high
and low temperature
(20℃,120Hz)
(120Hz)
1000
2000
3000
3500
4000
5000
Test time
Endurance (125℃)
(Applied ripple current)
Leakage current
Percentage of capacitance change
Tangent of loss angle
Shelf life (125℃)
Applicable standards
hours
hours
hours
hours
hours
hours
(φ6.3)
(φ8, φ10)
(63V to 100V : φ12.5)
(63V to 100V : φ16x16.5L, φ18x16.5L)
(63V to 100V : φ16x21.5L, φ18x21.5L)
(50V or less : φ12.5 or more)
The initial specified value or less
Within ±30% of initial value
300% or less of the initial specified value
Test time : 1000hours ; other items are same as the endurance. Voltage application treatment : According to JIS C5101-4 4.1
JIS C5101 - 1,- 18 (IEC 60384 - 1,- 18)
Outline Drawing
Unit : mm
Coefficient of Frequency for Rated Ripple Current
Frequency (Hz)
Rated voltage (V)
10 to 100
(C)
A±0.2
W
: Dummy terminal
( ) : Reference size
φD
6.3
6.3
8
10
12.5
16
16
18
18
L
5.8±0.3
7.7±0.3
10±0.5
10±0.5
13.5±0.5
16.5±0.5
21.5±0.5
16.5±0.5
21.5±0.5
A
6.6
6.6
8.4
10.4
13.0
17.0
17.0
19.0
19.0
B
6.6
6.6
8.4
10.4
13.0
17.0
17.0
19.0
19.0
C
2.7
2.7
3.0
3.3
4.9
5.6
5.6
6.6
6.6
0.5
0.5
0.7
0.7
1.0
1.0
1.0
1.0
1.0
W
to 0.8
to 0.8
to 1.1
to 1.1
to 1.4
to 1.4
to 1.4
to 1.4
to 1.4
P
2.0
2.0
3.1
4.7
4.6
7.2
7.2
7.2
7.2
1k
10k
100k
0.77
0.88
0.96
1
Part numbering system
RTT
̶
M
Casing symbol
0.4±0.2
F61
0.4±0.2
F80
0.4±0.2
G10
H10
0.4±0.2
0.7±0.3
ⅠE
0.7±0.3
JH
0.7±0.3
JM
0.7±0.3
KH
0.7±0.3
KM
Refer to individual page.
(Soldering conditions, Land pattern size, The taping specifications)
10
V
Rated voltage
symbol
Series code
L
120
φ6.3 (10V220µF)
(C)
(P)
B±0.2
φD±0.5
0.3 max.
M
Inner vent (φ10 or more)
221
M
Rated
capacitance
symbol
Capacitance
tolerance symbol
F80 U ̶
Casing
symbol
Taping
symbol
φ8, φ10 (example : 35V100µF)
RTT
̶
35
V
Rated voltage
symbol
Series code
101
M
Rated
capacitance
symbol
Capacitance
tolerance symbol
H10 SU ̶
Casing
symbol
Taping
symbol
50V or less : φ12.5 or more (35V1000µF)
RTT
̶
35
V
Rated voltage
symbol
Series code
102
M
KM
T ̶ R5
Rated
capacitance
symbol
Capacitance
tolerance symbol
Casing
symbol
Taping
symbol
63V to 100V : φ12.5 or more (63V220µF)
RTT
Series code
̶
63
Rated voltage
symbol
V
221
M
Rated
capacitance
symbol
Capacitance
tolerance symbol
JH KT ̶ R5
Casing
symbol
Taping
symbol
*If "Standard (terminal)" type is required, please see the series RVT.
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
RTT
VERTICAL CHIP TYPE ALUMINUM ELECTROLYTIC CAPACITORS
Standard Ratings
Rated voltage
(V)
10
Case
Item
Rated
capacitance
φD × L (mm)
(µF)
16
ESR ( Ω max.)
20℃
Rated ripple
current
- 40℃ (mArms)
Case
φD × L (mm)
25
ESR ( Ω max.)
20℃
Rated ripple
current
- 40℃ (mArms)
Case
φD × L (mm)
35
ESR ( Ω max.)
20℃
Rated ripple
current
- 40℃ (mArms)
20℃
Rated ripple
current
- 40℃ (mArms)
ESR ( Ω max.)
Case
φD × L (mm)
20℃
Rated ripple
current
- 40℃ (mArms)
10
-
-
-
-
-
-
-
-
-
-
6.3×5.8
1.0
15
114
6.3×5.8
3.2
48
58
-
-
-
-
-
-
-
-
6.3×5.8
1.0
15
114
6.3×5.8
1.0
15
114
6.3×7.7
1.2
18
95
33
-
-
-
-
6.3×5.8
1.0
15
114
6.3×5.8
1.0
15
114
6.3×7.7
0.60
9.0
165
47
-
-
-
-
6.3×5.8
1.0
15
114
6.3×7.7
0.60
9.0
165
100
-
-
-
-
-
220
6.3×7.7
0.60
9.0
165
8×10
0.20
2.0
340
10×10
0.15
1.5
500
470
10×10
0.15
1.5
500
680
12.5×13.5
0.086
1.29
750
330
-
-
-
φD × L (mm)
50
ESR ( Ω max.)
22
-
-
Case
8×10
1.2
18
95
0.50
7.5
180
6.3×7.7
0.60
9.0
165
8×10
0.50
7.5
180
8×10
0.20
2.0
340
10×10
0.30
4.5
280
6.3×7.7
0.60
9.0
165
8×10
0.20
2.0
340
10×10
0.30
4.5
280
8×10
0.20
2.0
340
10×10
0.15
1.5
500
12.5×13.5
0.18
2.7
550
12.5×13.5
0.18
2.7
550
16×16.5
0.12
1.8
850
18×16.5
0.10
1.5
920
8×10
0.20
2.0
340
8×10
0.20
2.0
340
8×10
0.20
2.0
340
10×10
0.15
1.5
500
10×10
0.15
1.5
500
10×10
0.15
1.5
500
10×10
0.15
1.5
500
0.086
1.29
750
12.5×13.5
0.086
1.29
750
16×16.5
0.060
0.90
1000
16×16.5
0.060
0.90
1000
18×16.5
0.050
0.75
1200
18×21.5
12.5×13.5
6.3×7.7
0.15
1.5
500
12.5×13.5
0.086
1.29
750
12.5×13.5
0.086
1.29
750
16×16.5
0.060
0.90
1000
12.5×13.5
0.086
1.29
750
16×16.5
0.060
0.90
1000
16×16.5
0.060
0.90
1000
18×16.5
0.050
0.75
1200
-
-
-
-
18×21.5
10×10
1000
12.5×13.5
0.086
1.29
750
18×16.5
0.050
0.75
1200
0.042
0.63
1550
0.042
0.63
1550
-
-
-
-
2200
16×16.5
0.060
0.90
1000
18×16.5
0.050
0.75
1200
-
-
-
-
-
-
-
-
-
-
-
-
3300
18×16.5
0.050
0.75
1200
18×21.5
0.042
0.63
1550
-
-
-
-
-
-
-
-
-
-
-
-
4700
18×21.5
0.042
0.63
1550
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Rated ripple
current
Case
Rated ripple
current
Case
Rated voltage
(V)
63
Case
Item
Rated
capacitance
φD × L (mm)
(µF)
10
22
33
-
80
ESR ( Ω max.)
20℃
-
- 40℃ (mArms)
-
-
20℃
- 40℃ (mArms)
15
110
8×10
0.75
15
110
0.75
15
110
8×10
0.75
15
110
10×10
0.55
11
150
10×10
0.55
11
150
10×10
0.55
11
150
12.5×13.5
0.32
4.8
300
140
8×10
0.70
14
140
8×10
0.75
15
110
10×10
0.50
10
200
10×10
0.55
11
150
0.70
14
140
10
200
100
12.5×13.5
0.25
3.75
400
220
16×16.5
0.22
3.3
500
330
16×16.5
0.22
3.3
470
16×21.5
0.16
2.4
Rated ripple
current
- 40℃ (mArms)
0.75
14
0.50
20℃
8×10
0.70
8×10
φD × L (mm)
ESR ( Ω max.)
8×10
8×10
10×10
47
φD × L (mm)
100
ESR ( Ω max.)
-
-
-
-
16×16.5
0.24
3.6
480
16×16.5
0.24
3.6
480
16×21.5
0.18
2.7
600
18×21.5
0.16
2.4
700
500
18×21.5
0.12
1.8
1000
-
-
-
-
650
-
-
-
-
-
-
-
-
(Note)Rated ripple current : 125℃ , 100kHz
ESR : 100kHz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
RTQ
®
Chip Type 150˚C Use, Low ESR, For Vibration Capacitors
●
●
●
●
RTQ
VERTICAL CHIP TYPE ALUMINUM ELECTROLYTIC CAPACITORS
GREEN
CAP
SMD
Vibration
150˚C
Low ESR
Resistance
1000hours
Anticleaning
solvent
Compatible with surface mounting.
For Vibration resistance. (30G guaranteed)
Supplied with carrier taping.
Guaranteed 1000 hours at 150°
C.
High temperature
RTQ
RTT
Marking color : Black print
Specifications
Item
Performance
ー40 to +150
±20
Category temperature range (℃)
Tolerance at rated capacitance (%)
Leakage current (µA)
(max.)
(20℃,120Hz)
(20℃)
Less than 0.02CV or 3 whichever is larger (after 2 minutes) C : Rated capacitance (µF) , V : Rated voltage (V)
Rated voltage (V)
tanδ (max.)
Tangent of loss angle
(tanδ)
10
0.26
16
0.20
25
0.16
35
0.14
10
3
7
16
2
5
25
2
3
35
2
3
0.02 is added to every 1000µF increase over 1000µF
Rated voltage (V)
Z−25℃/Z+20℃
Impedance ratio (max.)
Z−40℃/Z+20℃
Characteristics at high
and low temperature
(20℃,120Hz)
(120Hz)
Test time
Leakage current
Percentage of capacitance change
Tangent of loss angle
Endurance (150℃)
(Applied ripple current)
Shelf life (150℃)
Applicable standards
1000 hours
The initial specified value or less
Within ±30% of initial value
300% or less of the initial specified value
Test time : 1000hours ; other items are same as the endurance. Voltage application treatment : According to JIS C5101-4 4.1
JIS C5101 - 1,- 18 (IEC 60384 - 1,- 18)
Outline Drawing
Unit : mm
Coefficient of Frequency for Rated Ripple Current
Frequency (Hz)
10 to 35
(C)
A±0.2
Rated voltage (V)
1k
10k
100k
0.77
0.88
0.96
1
φ10X10L (example : 35V100µF)
RTQ
̶
Series code
L
120
Part numbering system
(C)
(P)
B±0.2
φD±0.5
0.3 max.
M
Inner vent (φ10 only)
35
V 101
Rated voltage
symbol
W
Rated
capacitance
symbol
M
H10 U
Capacitance
tolerance
symbol
Casing
symbol
Q
Additional
symbol
̶
Taping
symbol
: Dummy terminal
( ) : Reference size
φD
8
10
L
10±0.5
10±0.5
A
B
8.4
8.4
10.4 10.4
P
C
W
3.0 0.7 to 1.1 3.1
3.3 0.7 to 1.1 4.7
M
Casing symbol
0.4±0.2
G10
H10
0.4±0.2
Refer to individual page.
(Soldering conditions, Land pattern size, The taping specifications)
Standard Ratings
Rated voltage (V)
Item
Rated
capacitance (µF)
10
Case
φD×L (mm)
Casing
symbol
16
ESR
Rated ripple
current
Case
Casing
symbol
25
ESR
Rated ripple
current
Case
Casing
symbol
ESR
Rated ripple
current
(Ω max.)
(mArms)
φD×L (mm)
(Ω max.)
(mArms)
φD×L (mm)
(Ω max.)
(mArms)
47
—
—
—
—
8 × 10
G10
0.70
120
8 × 10
G10
0.70
120
68
—
—
—
—
8 × 10
G10
0.70
120
8 × 10
G10
0.70
120
100
8 × 10
G10
0.70
120
8 × 10
G10
0.70
120
8 × 10
G10
0.70
120
150
—
—
—
—
10 × 10
H10
0.40
160
10 × 10
H10
0.40
160
220
8 × 10
G10
10 × 10
H10
0.40
160
120
10 × 10
H10
0.40
160
330
10 × 10
H10
0.40
160
10 × 10
H10
0.40
160
—
—
—
—
470
10 × 10
H10
0.40
160
—
—
—
—
—
—
—
—
ESR
Rated ripple
current
(Ω max.)
(mArms)
Rated voltage (V)
Item
Rated
capacitance (µF)
0.70
35
Case
φD×L (mm)
Casing
symbol
33
8 × 10
G10
0.70
120
47
8 × 10
G10
0.70
120
68
8 × 10
G10
0.70
120
100
10 × 10
H10
0.40
160
150
10 × 10
H10
0.40
160
(Note)Rated ripple current : 150℃ , 100kHz ; ESR : 20℃ , 100kHz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS
Miniature
AAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
Type Aluminum Electrolytic Capacitors
CAT.No.2021/2022
RC3
MINIATURE
MINIATUREALUMINUM
ALUMINUMELECTROLYTIC
ELECTROLYTICCAPACITORS
CAPACITORS
GREEN
CAP
5mm L, Standard Capacitors
●
®
Diameters from φ4 to φ8mm and a height of 5mm.
Low profile
RC3
RC2
Marking color : White print on a blue sleeve
Specifications
Item
Performance
ー40 to +85
±20
Category temperature range (℃)
Tolerance at rated capacitance (%)
Leakage current (µA)
(max.)
(20℃,120Hz)
0.01CV or 3 whichever is larger (after 2 minutes) C : Rated capacitance (µF); V : Rated voltage (V)
Rated voltage (V)
φ4 to φ6.3
φ8
Tangent of loss angle
(tanδ)
tanδ (max.)
Characteristics at high
and low temperature
Impedance ratio (max.)
4
0.35
0.39
6.3
0.24
0.28
10
0.20
0.24
16
0.16
0.16
25
0.14
0.14
35
0.12
0.12
50
0.10
0.10
4
6
16
6.3
4
10
10
3
8
16
2
6
25
2
4
35
2
4
50
2
4
Rated voltage (V)
Z−25℃/Z+20℃
Z−40℃/Z+20℃
(20℃,120Hz)
(120Hz)
1000 hours
The initial specified value or less
Within ±20% of initial value
200% or less of the initial specified value
Test time
Leakage current
Percentage of capacitance change
Tangent of the loss angle
Endurance (85℃)
(Applied ripple current)
(20℃)
Shelf life (85℃)
Test time : 1000hours ; other items are same as the endurance. Voltage application treatment : According to JIS C5101-4 4.1
Applicable standards
JIS C5101 - 1,- 4 (IEC 60384 - 1,- 4)
Outline Drawing
Unit : mm
Coefficient of Frequency for Rated Ripple Current
Frequency (Hz)
Sleeve
F±0.5
φD+0.5/0
φd±0.05 copper plated steel wire (tinned)
L+α max.
Rated voltage (V)
4 to 16
25 to 35
50
RC3
̶
Series code
4
1.5
0.45
1.0
D0
φD
F
φd
α
Casing symbol
5
2.0
0.45
1.0
E0
6.3
2.5
0.45
1.0
F0
120
1k
10k・100k
0.8
0.8
0.8
1
1
1
1.1
1.5
1.6
1.2
1.7
1.9
Part numbering system (example : 6.3V100µF)
5
min.
15min.
50・60
6
V
101
M
# ̶
F0
Rated capacitance
Capacitance
symbol
tolerance symbol
Rated voltage
symbol
Taping (Forming)
symbol
Casing
symbol
8
2.5
0.45
1.0
G0
Standard Ratings
4
Rated voltage (V)
Rated
capacitance (µF)
Item
Case
φD×L (mm)
6.3
Rated ripple
current
Case
(mArms) φD×L (mm)
10
Rated ripple
current
Case
(mArms) φD×L (mm)
16
Rated ripple
current
Case
(mArms) φD×L (mm)
25
Rated ripple
current
Case
(mArms) φD×L (mm)
35
Rated ripple
current
Case
(mArms) φD×L (mm)
50
Rated ripple
current
Case
(mArms) φD×L (mm)
Rated ripple
current
(mArms)
1
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
4×5
10
2.2
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
4×5
14
4×5
15
3.3
̶
̶
̶
̶
̶
̶
̶
̶
4×5
15
4×5
17
4×5
18
4.7
̶
̶
̶
̶
̶
̶
4×5
17
4×5
18
4×5
20
5×5
25
10
̶
̶
4×5
20
4×5
22
4×5
25
5×5
30
5×5
30
6.3×5
40
22
4×5
25
4×5
30
5×5
35
5×5
40
6.3×5
50
6.3×5
55
8×5
75
33
4×5
30
5×5
40
5×5
45
6.3×5
60
6.3×5
65
8×5
80
8×5
90
47
4×5
35
5×5
50
6.3×5
65
6.3×5
70
8×5
95
8×5
100
̶
̶
8×5
125
8×5
100
5×5
60
6.3×5
85
6.3×5
95
135
̶
̶
̶
̶
220
6.3×5
105
8×5
145
8×5
155
̶
̶
̶
̶
̶
̶
̶
̶
330
8×5
150
8×5
175
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
470
8×5
180
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
(Note) Rated ripple current : 85°
C, 120Hz.
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
R3S
MINIATURE ALUMINUM ELECTROLYTIC
CAPACITORS
MINIATURE ALUMINUM
ELECTROLYTIC CAPACITORS
®
5mm L, 105°C Use Capacitors
●
●
GREEN
CAP
105˚C
1000hours
R3S
Anticleaning
solvent
Diameters from φ4 to φ6.3mm and a height of 5mm.
Guarantees 1000 hours at 105℃.
R3S
High temperature
Marking color : White print on a black sleeve
RC3
Specifications
Performance
−55 to +105
±20
Item
Category temperature range (℃)
Tolerance at rated capacitance (%)
Leakage current (µA)
(max.)
(20℃,120Hz)
0.01CV or 3 whichever is larger (after 2 minutes) C : Rated capacitance (µF); V : Rated voltage (V)
Rated voltage (V)
tanδ (max.)
Tangent of loss angle
(tanδ)
6.3
0.28
10
0.24
16
0.20
25
0.14
(20℃)
35
0.12
50
0.10
(20°
C,120Hz)
Rated voltage (V)
Z−25℃/Z+20℃
Z−40℃/Z+20℃
Characteristics at high
6.3
3
8
Impedance ratio (max.)
and low temperature
10
3
5
16
2
4
25
2
3
35
2
3
50
2
3
(120Hz)
1000 hours
The initial specified value or less
Within ±20% of initial value
200% or less of the initial specified value
Test time
Leakage current
Percentage of capacitance change
Tangent of the loss angle
Endurance (105℃)
(Applied ripple current)
Shelf life (105℃)
Test time : 1000hours ; other items are same as the endurance. Voltage application treatment : According to JIS C5101-4 4.1
Applicable standards
JIS C5101 - 1,
- 4 (IEC 60384 - 1,
- 4)
Outline Drawing
Unit : mm
Coefficient of Frequency for Rated Ripple Current
Frequency (Hz)
Sleeve
F±0.5
φD+0.5/0
φd±0.05 copper plated steel wire (tinned)
L+α max.
15min.
5
min.
Rated voltage (V)
6.3 to 16
25 to 35
50
Casing symbol
4
1.5
0.45
1.0
D0
5
2.0
0.45
1.0
E0
R3S
6.3
2.5
0.45
1.0
F0
120
1k
10k・100k
0.64
0.57
0.53
0.80
0.71
0.67
0.92
0.89
0.90
1
1
1
Part numbering system (example : 16V47µF)
Series code
φD
F
φd
α
50・60
̶
16
Rated voltage
symbol
V
470
M
F0 # ̶
Rated capacitance
Capacitance
Casing
symbol
tolerance symbol symbol
Taping(Forming)
symbol
Standard Ratings
10
16
25
35
50
6.3
Rated ripple current
Rated ripple current
Rated ripple current
Rated ripple current
Rated ripple current
Rated ripple current
Case
Case
Case
Case
Case
Case
φD×L (mm)
(mArms)
φD×L (mm)
(mArms)
φD×L (mm)
(mArms)
φD×L (mm)
(mArms)
φD×L (mm)
(mArms)
φD×L (mm)
(mArms)
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
4×5
11
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
4×5
17
̶
̶
̶
̶
̶
̶
̶
̶
4×5
20
4×5
17
̶
̶
̶
̶
5×5
27
4×5
15
4×5
18
4×5
20
̶
̶
6.3×5
45
20
4×5
23
5×5
31
5×5
34
4×5
̶
̶
4×5
26
34
5×5
38
6.3×5
53
6.3×5
57
5×5
̶
̶
̶
̶
5×5
33
43
6.3×5
56
6.3×5
66
5×5
̶
̶
̶
̶
̶
̶
5×5
45
6.3×5
65
6.3×5
58
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
6.3×5
78
ripple current : 105℃, 100kHz.
Rated voltage (V)
Item
Rated
capacitance (µF)
1
2.2
3.3
4.7
10
22
33
47
100
(Note) Rated
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
RB3
RB3
MINIATURE
ALUMINUM
ELECTROLYTIC
CAPACITORS
MINIATURE
ALUMINUM
ELECTROLYTIC
CAPACITORS
5mm L, Bipolar Capacitors
●
®
GREEN
CAP
Diameters from φ4 to φ6.3mm and a height of 5mm.
Low profile
RB3
RB2
Bipolar
Marking color : White print on a blue sleeve
RC3
Specifications
Item
Performance
−40 to +85
±20
Category temperature range (℃)
Tolerance at rated capacitance (%)
Leakage current (µA)
(max.)
(20℃,120Hz)
(20℃)
0.03CV + 3 (after 5 minutes) C : Rated capacitance (µF); V : Rated voltage (V)
Rated voltage (V)
Tangent of loss angle
(tanδ)
6.3
0.35
0.30
φ4
φ5, 6.3
tanδ (max.)
10
0.30
0.25
16
0.25
0.20
25
0.20
0.15
35
0.20
0.15
50
0.20
0.15
(20℃,120Hz)
1000 hours (with the polarity inverted every 250 hours)
The initial specified value or less
Within±20% of initial value
200% or less of the initial specified value
Test time
Leakage current
Percentage of capacitance change
Tangent of the loss angle
Endurance (85℃)
JIS C5101 - 1,
- 4 (IEC 60384 - 1,
- 4)
Applicable standards
Outline Drawing
Unit : mm
Coefficient of Frequency for Rated Ripple Current
Frequency (Hz)
Sleeve
F±0.5
φD+0.5/0
φd±0.05 copper plated steel wire (tinned)
L+α max.
15min.
5
min.
Rated voltage (V)
6.3 to 16
25 to 35
50
Casing symbol
4
1.5
0.45
1.0
D0
5
2.0
0.45
1.0
E0
RB3
6.3
2.5
0.45
1.0
F0
120
1k
10k・100k
0.8
0.8
0.8
1
1
1
1.1
1.5
1.6
1.2
1.7
1.9
Part numbering system (example : 10V47µF)
Series code
φD
F
φd
α
50・60
̶
10
Rated voltage
symbol
V
470
M
Rated capacitance
Capacitance
symbol
tolerance symbol
F0
Casing
symbol
#̶
Taping(Forming)
symbol
Standard Ratings
Rated voltage (V)
Rated
capacitance (µF)
0.33
0.47
1
2.2
3.3
4.7
10
22
33
47
Item
10
16
25
35
50
6.3
Rated ripple current
Rated ripple current
Rated ripple current
Rated ripple current
Rated ripple current
Rated ripple current
Case
Case
Case
Case
Case
Case
φD×L (mm)
(mArms)
φD×L (mm)
(mArms)
φD×L (mm)
(mArms)
φD×L (mm)
(mArms)
φD×L (mm)
(mArms)
φD×L (mm)
(mArms)
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
4×5
4
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
4×5
5
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
4×5
7
̶
̶
̶
̶
̶
̶
̶
̶
5×5
4×5
14
11
̶
̶
̶
̶
̶
̶
4×5
6.3×5
13
5×5
20
17
̶
̶
̶
̶
4×5
5×5
6.3×5
14
21
6.3×5
24
24
̶
̶
̶
̶
4×5
5×5
6.3×5
18
26
35
6.3×5
35
̶
̶
̶
̶
̶
̶
5×5
6.3×5
6.3×5
31
40
45
̶
̶
̶
̶
̶
̶
̶
̶
6.3×5
6.3×5
45
49
̶
̶
̶
̶
̶
̶
̶
̶
6.3×5
6.3×5
54
59
(Note) Rated ripple current : 85℃, 120Hz.
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
RC2
AntiGREEN
cleaning
CAP
solvent
7mm L, Standard Capacitors
●
●
RC2
MINIATURE ALUMINUM ELECTROLYTIC
CAPACITORS
MINIATURE ALUMINUM
ELECTROLYTIC CAPACITORS
®
Diameters from φ4 to φ8mm and a height of 7mm.
Guarantees 1000 hours at 85℃.
Low Profile
RC2
RE3
Marking color : White print on a blue sleeve
Specifications
Performance
−40 to +85
±20
Item
Category temperature range (℃)
Tolerance at rated capacitance (%)
Leakage current (µA)
(max.)
(20℃,120Hz)
0.01CV or 3 whichever is larger (after 2 minutes) C : Rated capacitance (µF); V : Rated voltage (V)
Rated voltage (V)
tanδ (max.)
Tangent of loss angle
(tanδ)
4
0.35
6.3
0.24
10
0.20
16
0.16
25
0.14
35
0.12
(20℃)
50
0.10
100
0.08
63
0.08
(20℃,120Hz)
Rated voltage (V)
Z−25℃/Z+20℃
Z−40℃/Z+20℃
Characteristics at high
and low temperature
4
6
16
Impedance ratio (max.)
6.3
4
10
10
3
8
16
2
6
25
2
4
35
2
4
50
2
4
63
2
4
100
2
4
(120Hz)
Test time
Leakage current
Percentage of capacitance change
Tangent of the loss angle
Endurance (85℃)
(Applied ripple current)
1000 hours
The initial specified value or less
Within ±20% of initial value
200% or less of the initial specified value
Shelf life (85℃)
Test time : 1000hours ; other items are same as the endurance. Voltage application treatment : According to JIS C5101-4 4.1
Applicable standards
JIS C5101 - 1,
- 4 (IEC 60384 - 1,
- 4)
Outline Drawing
Unit : mm
Coefficient of Frequency for Rated Ripple Current
Frequency (Hz)
Sleeve
F±0.5
φD+0.5/0
φd±0.05 copper plated steel wire (tinned)
L+α max.
15min.
Rated voltage (V)
4 to 16
25 to 35
50 to 100
Casing symbol
4
1.5
0.45
1.0
D1
5
2.0
0.45
1.0
E1
RC2
5
min.
6.3
2.5
0.45
1.0
F1
120
1k
10k・100k
0.8
0.8
0.8
1
1
1
1.1
1.5
1.6
1.2
1.7
1.9
Part numbering system (example : 10V220µF)
̶
Series code
φD
F
φd
α
50・60
8
3.5
0.45
1.0
G1
10
V
Rated voltage
symbol
221
M
G1 #
Rated capacitance
Capacitance
Casing
symbol
tolerance symbol symbol
̶
Optional
symbol
Taping(Forming)
symbol
Standard Ratings
4
Rated voltage (V)
Item
Rated
capacitance (µF)
Case
φD×L (mm)
̶
̶
̶
̶
̶
̶
4×7
4×7
5×7
6.3×7
8×7
(Note) Rated ripple current :
1
2.2
3.3
4.7
10
22
33
47
100
220
330
6.3
Rated ripple
current
Case
Rated ripple
current
10
Case
Rated ripple
current
16
Case
Rated ripple
current
25
Case
Rated ripple
current
35
Case
Rated ripple
current
50
Case
Rated ripple
current
63
Case
Rated ripple
current
100
Case
Rated ripple
current
(mArms) φD×L (mm) (mArms) φD×L (mm) (mArms) φD×L (mm) (mArms) φD×L (mm) (mArms) φD×L (mm) (mArms) φD×L (mm) (mArms) φD×L (mm) (mArms) φD×L (mm) (mArms)
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
4×7
4×7
4×7
10
10
12
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
4×7
4×7
5×7
15
15
20
̶
̶
̶
̶
̶
̶
̶
4×7
4×7
4×7
6.3×7
15
20
23
30
4×7
15
̶
̶
̶
̶
̶
̶
̶
4×7
4×7
5×7
6.3×7
20
24
30
35
4×7
20
̶
̶
̶
̶
̶
̶
̶
4×7
4×7
5×7
6.3×7
25
30
40
50
4×7
30
̶
̶
̶
̶
̶
4×7
4×7
4×7
5×7
6.3×7
35
40
55
70
35
5×7
50
̶
̶
̶
̶
4×7
4×7
5×7
6.3×7
8×7
45
55
75
100
35
40
6.3×7
70
̶
̶
̶
̶
̶
̶
4×7
5×7
5×7
8×7
60
70
110
40
50
6.3×7
85
̶
̶
̶
̶
̶
̶
̶
̶
5×7
6.3×7
6.3×7
105
120
70
80
8×7
145
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
6.3×7
8×7
8×7
185
205
120
140
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
8×7
170
205
85℃, 120Hz.
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
7mm L, 105˚
R2S
R2S
MINIATURE
ALUMINUM
ELECTROLYTIC
CAPACITORS
MINIATURE
ALUMINUM
ELECTROLYTIC
CAPACITORS
7mm L, 105°C Use Capacitors
●
●
GREEN
CAP
105˚C
1000hours
®
Anticleaning
solvent
Diameters from φ4 to φ6.3mm and a height of 7mm.
Guarantees 1000 hours at 105℃.
R2S
High temperature
Marking color : White print on a black sleeve
RC2
Specifications
Performance
−55 to +105
±20
Item
Category temperature range (℃)
Tolerance at rated capacitance (%)
Leakage current (µA)
(max.)
(20℃,120Hz)
0.01CV or 3 whichever is larger (after 2 minutes) C : Rated capacitance (µF); V : Rated voltage (V)
Rated voltage (V)
tanδ (max.)
Tangent of loss angle
(tanδ)
6.3
0.22
10
0.19
16
0.16
25
0.14
(20℃)
35
0.12
50
0.10
(20°
C,120Hz)
Rated voltage (V)
Z−25℃/Z+20℃
Z−40℃/Z+20℃
Characteristics at high
6.3
3
8
Impedance ratio (max.)
and low temperature
10
3
5
16
2
4
25
2
3
35
2
3
50
2
3
(120Hz)
1000 hours
The initial specified value or less
Within ±20% of initial value
200% or less of the initial specified value
Test time
Leakage current
Percentage of capacitance change
Tangent of the loss angle
Endurance (105℃)
(Applied ripple current)
Shelf life (105℃)
Test time : 1000hours ; other items are same as the endurance. Voltage application treatment : According to JIS C5101-4 4.1
Applicable standards
JIS C5101 - 1,
- 4 (IEC 60384 - 1,
- 4)
Outline Drawing
Unit : mm
Sleeve
F±0.5
φD+0.5/0
φd±0.05 copper plated steel wire (tinned)
L+α max.
15min.
5
min.
Coefficient of Frequency for Rated Ripple Current
Frequency (Hz)
Rated voltage (V)
50・60
120
1k
10k・100k
6.3 to 16
25 to 35
50
0.68
0.48
0.45
0.72
0.63
0.50
0.92
0.80
0.70
1
1
1
Part numbering system (example : 25V33µF)
R2S
Series code
φD
F
φd
α
Casing symbol
4
1.5
0.45
1.0
D1
5
2.0
0.45
1.0
E1
6.3
2.5
0.45
1.0
F1
̶
25
Rated voltage
symbol
V
330
M
F1 # ̶
Rated capacitance
Capacitance
Casing
symbol
tolerance symbol symbol
Taping(Forming)
symbol
Standard Ratings
Rated voltage (V)
Rated
capacitance (µF)
1
2.2
3.3
4.7
10
22
33
47
100
Item
10
16
25
35
50
6.3
Rated ripple current
Rated ripple current
Rated ripple current
Rated ripple current
Rated ripple current
Rated ripple current
Case
Case
Case
Case
Case
Case
φD×L (mm)
(mArms)
φD×L (mm)
(mArms)
φD×L (mm)
(mArms)
φD×L (mm)
(mArms)
φD×L (mm)
(mArms)
φD×L (mm)
(mArms)
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
4×7
16
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
4×7
25
̶
̶
̶
̶
̶
̶
4×7
21
4×7
23
4×7
28
̶
̶
̶
̶
̶
̶
4×7
25
4×7
25
5×7
48
̶
̶
̶
̶
4×7
39
5×7
47
5×7
48
6.3×7
75
̶
̶
4×7
42
4×7
49
5×7
54
6.3×7
87
6.3×7
90
̶
̶
̶
̶
5×7
53
5×7
60
6.3×7
83
6.3×7
90
̶
̶
̶
̶
̶
̶
5×7
64
6.3×7
95
6.3×7
95
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
6.3×7
96
(Note) Rated ripple current : 105℃, 100kHz.
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
RB2
MINIATURE ALUMINUM ELECTROLYTIC
CAPACITORS
MINIATURE ALUMINUM
ELECTROLYTIC CAPACITORS
®
AntiGREEN
cleaning
CAP
solvent
7mm L, Bipolar Capacitors
●
RB2
Diameters from φ4 toφ 6.3mm and a height of 7mm.
Bipolar
RB2
RC2
Marking color : White print on a blue sleeve
Specifications
Performance
−40 to +85
±20
Item
Category temperature range (℃)
Tolerance at rated capacitance (%)
Leakage current (µA)
(max.)
(20℃,120Hz)
0.03CV + 3 (after 5 minutes) C : Rated capacitance (µF) ; V : Rated voltage (V)
Rated voltage (V)
tanδ (max.)
Tangent of loss angle
(tanδ)
6.3
0.30
10
0.25
16
0.20
(20℃)
25
0.15
35
0.15
50
0.15
(20℃,120Hz)
1000 hours (with the polarity inverted every 250 hours)
The initial specified value or less
Within ±20% of initial value
200% or less of the initial specified value
Test time
Leakage current
Percentage of capacitance change
Tangent of the loss angle
Endurance (85℃)
JIS C5101 - 1,- 4 (IEC 60384 - 1,- 4)
Applicable standards
Outline Drawing
Unit : mm
Coefficient of Frequency for Rated Ripple Current
Frequency (Hz)
Sleeve
F±0.5
φD+0.5/0
φd±0.05 copper plated steel wire (tinned)
L+α max.
15min.
5
min.
Rated voltage (V)
6.3 to 16
25 to 35
50
Casing symbol
4
1.5
0.45
1.0
D1
5
2.0
0.45
1.0
E1
RB2
6.3
2.5
0.45
1.0
F1
120
1k
10k・100k
0.8
0.8
0.8
1
1
1
1.1
1.5
1.6
1.2
1.7
1.9
Part numbering system (example: 16V47µF)
Series code
φD
F
φd
α
50・60
̶
16
Rated voltage
symbol
V
470
M
F1 # ̶
Rated capacitance
Capacitance
Casing
symbol
tolerance symbol symbol
Taping(Forming)
symbol
Standard Ratings
Rated voltage (V)
Item
Rated
capacitance (µF)
0.33
0.47
1
2.2
3.3
4.7
10
22
33
47
6.3
10
16
25
35
50
Rated ripple current
Rated ripple current
Rated ripple current
Rated ripple current
Rated ripple current
Rated ripple current
Case
Case
Case
Case
Case
Case
φD×L (mm) (mArms)
φD×L (mm) (mArms)
φD×L (mm) (mArms)
φD×L (mm) (mArms)
φD×L (mm) (mArms)
φD×L (mm) (mArms)
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
4×7
5
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
4×7
6
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
4×7
9
̶
̶
̶
̶
̶
̶
̶
̶
4×7
14
5×7
16
̶
̶
̶
̶
̶
̶
4×7
17
5×7
19
5×7
19
̶
̶
̶
̶
4×7
17
5×7
23
5×7
23
6.3×7
27
̶
̶
̶
̶
4×7
23
5×7
29
6.3×7
39
6.3×7
39
̶
̶
̶
̶
5×7
35
5×7
39
6.3×7
50
6.3×7
58
̶
̶
̶
̶
5×7
43
6.3×7
55
6.3×7
61
6.3×7
71
̶
̶
̶
̶
̶
̶
6.3×7
60
6.3×7
66
6.3×7
73
(Note) Rated ripple current : 85℃, 120Hz.
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
RE3
MINIATURE
CAPACITORS
MINIATUREALUMINUM
ALUMINUMELECTROLYTIC
ELECTROLYTIC
CAPACITORS
Standard Capacitors
●
GREEN
CAP
®
Anticleaning
solvent
250V Max.
Guarantees 2000 hours at 85℃.
RJ4
High temperature
Marking color : White print on a blue sleeve
RE3
Specifications
Item
Performance
Category temperature range (℃)
ー40 to +85
Tolerance at rated capacitance (%)
±20
Leakage current (µA)
(20℃,120Hz)
Rated voltage (V)
6.3 to 100
160 to 450
Leakage current (µA)
(max.)
0.03CV or 4 whichever is larger (after 1 minute)
0.01CV or 3 whichever is larger (after 2 minutes)
CV≦1000 : 0.1CV+40 (after 1 minute)
CV>1000 : 0.04CV+100 (after 1 minute)
(20℃)
C : Rated capacitance (µF) V: Rated voltage (V)
Tangent of loss angle
(tanδ)
Rated voltage (V)
6.3
10
16
25
35
50
63
100
160
200
250
315
350
400
450
tanδ (max.)
0.28
0.24
0.20
0.16
0.14
0.12
0.10
0.08
0.20
0.20
0.20
0.24
0.24
0.24
0.24
(20℃,120Hz)
0.02 is added to every 1000µF increase over 1000µF.
Rated voltage (V)
Characteristics at high
and low temperature
Impedance Z−25℃/Z+20℃
ratio
Z−40℃/Z+20℃
(max.)
6.3
10
16
25
35
50
63
100
160
200
250
315
350
400
5
4
3
2
2
2
2
2
4
4
4
4
4
4
450
4
12
10
8
5
4
3
3
3
15
15
15
10
10
10
10
(120Hz)
2000 hours
Test time
The initial specified value or less
Leakage current
Endurance (85℃)
(Applied ripple current)
Within ±20% of initial value
Percentage of capacitance change
200% or less of the initial specified value
Tangent of the loss angle
Shelf life (85℃)
Test time : 1000hours ; other items are same as the endurance. Voltage application treatment : According to JIS C5101-4 4.1
Applicable standards
JIS C5101 - 1,- 4 (IEC 60384 - 1,- 4)
Outline Drawing
Unit : mm
Coefficient of Frequency for Rated Ripple Current
Rated voltage (V)
Sleeve
Vent (except φ5)
φd±0.05 copper plated steel wire (tinned)
Frequency (Hz)
CV (µF×WV)
All CV value
≦1000
1000<
≦1000
1000<
All CV value
6.3 to 16
F±0.5
φD+0.5/0
25 to 35
L+α max.
φD
F
φd
α
5
2.0
0.5
6.3
2.5
0.5
2.0
15min.
8
3.5
0.6
1.5
10
5.0
0.6
2.0
50 to 100
160 to 450
5
min.
12.5
5.0
0.6
50・60
120
1k
10k
100k
0.8
0.8
0.8
0.8
0.8
0.8
1
1
1
1
1
1
1.1
1.5
1.2
1.6
1.2
1.3
1.2
1.7
1.3
1.9
1.3
1.5
1.2
1.7
1.3
1.9
1.3
1.6
Part numbering system (example : 16V1000µF)
16
7.5
0.8
2.5
18
7.5
0.8
RE3
Series code
̶
16
Rated voltage
symbol
V
102
M
Rated capacitance
Capacitance
symbol
tolerance symbol
̶
H4 #
Casing
symbol
Optional
symbol
Taping(Forming)
symbol
Casing symbol
Casing
Casing
Size
Size
φD×L (mm) Symbol φD×L (mm) Symbol
12.5×25
Ⅰ6
5×11
E3
16×25
J6
6.3×11
F3
16×31.5
J7
8×11.5
G3
16×35.5
J8
10×12.5
H3
18×31.5
K7
10×16
H4
18×35.5
K8
10×20
H5
18×40
K9
12.5×20
Ⅰ5
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
RE3
®
MINIATURE ALUMINUM ELECTROLYTIC
CAPACITORS
MINIATURE ALUMINUM
ELECTROLYTIC CAPACITORS
Standard Ratings
Rated voltage
(V)
6.3
Item Case
Rated
capacitance
(µF)
ESR
φD×L
(mm)
(Ω)
1
̶
̶
2.2
̶
3.3
4.7
10
Rated
ripple
current
Case
ESR
(mArms)
φD×L
(mm)
(Ω)
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
10
̶
22
16
Rated
ripple
current
Case
ESR
(mArms)
φD×L
(mm)
(Ω)
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
5×11
33.2
̶
̶
̶
̶
̶
̶
5×11
15.1
33
̶
̶
̶
̶
̶
5×11
47
̶
̶
̶
5×11
8.5
99
5×11
100
̶
̶
̶
5×11
3.8
146
̶
25
Rated
ripple
current
Case
ESR
(mArms)
φD×L
(mm)
(Ω)
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
35
Rated
ripple
current
Case
ESR
50
Rated
ripple
current
Case
(mArms)
φD×L
(mm)
φD×L
(mm)
(Ω)
(mArms)
̶
̶
̶
̶
5×11
̶
̶
̶
̶
̶
5×11
̶
̶
̶
̶
̶
ESR
RE3
63
Rated
ripple
current
Case
ESR
100
Rated
ripple
current
Case
Rated
ripple
current
(Ω)
(mArms)
(Ω)
(mArms)
21
̶
̶
̶
5×11
90.5
31
̶
̶
̶
5×11
60.3
30
5×11
60.3
38
̶
̶
̶
5×11
40.2
40
45
(Ω)
199
(mArms)
φD×L
(mm)
ESR
φD×L
(mm)
133
21
5×11
56.5
38
5×11
49.4
40
5×11
42.3
45
5×11
35.3
45
5×11
28.2
50
5×11
26.5
55
5×11
23.2
59
5×11
19.9
66
5×11
16.6
66
6.3×11
13.3
75
75
5×11
12.1
82
5×11
10.6
87
5×11
9.1
98
5×11
7.5
100
6.3×11
6.0
130
10.1
92
5×11
8.0
100
5×11
7.0
107
5×11
6.0
126
6.3×11
5.0
140
8×11.5
4.0
180
7.1
110
5×11
5.7
118
5×11
4.9
130
6.3×11
4.2
155
6.3×11
3.5
170
10×12.5
2.8
230
5×11
3.3
160
6.3×11
2.7
199
6.3×11
2.3
214
8×11.5
2.0
260
1.7
298
10×20
1.3
370
6.3×11
1.5
264
8×11.5
1.2
349
10×12.5
1.1
443
10×12.5
0.91
443
10×16
0.75
470 12.5×20
0.60
620
8×11.5
220
5×11
2.1
200
6.3×11
1.8
240
330
6.3×11
1.4
270
6.3×11
1.2
290
8×11.5
1.0
383
10×12.5
0.81
510
10×12.5
0.70
542
10×16
0.60
595
10×20
0.50
710 12.5×25
0.40
760
470
6.3×11
0.99
322
8×11.5
0.85
417
8×11.5
0.71
457
10×12.5
0.57
545
10×16
0.49
664 12.5×20
0.42
887 12.5×20
0.35
900
16×25
0.28
1000
10×12.5
0.40
791
0.13
1380
0.47
546
10×16
0.33
10×20
0.27
996 12.5×20
0.23
1210 12.5×25
0.20
1400
16×25
0.17
1300
18×40
2200
10×20
0.23
1010
10×20
0.20
1080 12.5×20
0.17
1350 12.5×25
0.14
1660
16×25
0.12
1950
16×35.5
0.11
2340
̶
̶
̶
̶
̶
̶
3300
10×20
0.16
1230 12.5×20
0.14
1430 12.5×25
0.12
1690
16×25
0.10
2030
16×35.5
0.090
2510
18×35.5
0.080 2810
̶
̶
̶
̶
̶
̶
4700
12.5×20
0.12
1710 12.5×25
0.11
1780
16×25
0.092
2100
16×31.5
0.078
2650
18×35.5
0.071
2990
̶
̶
̶
̶
̶
̶
̶
̶
̶
6800
12.5×25
0.093
1930
16×25
0.083
2200
16×35.5
0.073
2580
18×35.5
0.063
3290
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
10000
16×25
0.076
2450
16×35.5
0.070
2700
18×35.5
0.063
3130
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
15000
16×35.5
0.062
2860
18×35.5
0.058
3100
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
22000
18×40
0.053
3340
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
ESR
Rated
ripple
current
Case
ESR
Case
ESR
ESR
ESR
ESR
ESR
(mArms)
(Ω)
(mArms)
(Ω)
(mArms)
(Ω)
(mArms)
(Ω)
(mArms)
(Ω)
(mArms)
φD×L
(mm)
Rated
ripple
current
(Ω)
φD×L
(mm)
Rated
ripple
current
Case
φD×L
(mm)
Rated
ripple
current
Case
φD×L
(mm)
Rated
ripple
current
Case
φD×L
(mm)
Rated
ripple
current
Case
φD×L
(mm)
Rated
ripple
current
(Ω)
(mArms)
1000
8×11.5
Rated voltage
(V)
160
Item Case
Rated
capacitance
(µF)
φD×L
(mm)
650
200
250
315
350
400
450
0.47
6.3×11
706
15
6.3×11
706
15
6.3×11
706
15
6.3×11
847
15
6.3×11
847
15
6.3×11
847
15
8×11.5
847
18
1
6.3×11
332
22
6.3×11
332
22
6.3×11
332
22
6.3×11
398
22
6.3×11
398
22
6.3×11
398
22
8×11.5
398
25
2.2
6.3×11
151
32
6.3×11
151
32
6.3×11
151
32
8×11.5
181
38
8×11.5
181
38
8×11.5
181
38
10×12.5
181
43
3.3
6.3×11
101
40
6.3×11
101
40
8×11.5
101
48
10×12.5
121
53
10×12.5
121
53
10×12.5
121
54
10×16
121
59
4.7
6.3×11
8×11.5
70.6
56
10×12.5
84.7
65
10×12.5
84.7
65
10×16
84.7
71
10×20
84.7
76
12.5×20
39.8
123
10
8×11.5
70.6
48
8×11.5
70.6
56
33.2
81
10×12.5
33.2
94
10×16
33.2
101
10×20
39.8
115
10×20
39.8
115
12.5×20
39.8
123
22
10×16
15.1
151
10×20
15.1
170
12.5×20
15.1
182
12.5×20
18.1
182
12.5×25
18.1
197
12.5×25
18.1
197
16×25
18.1
226
33
10×20
10.1
202 12.5×20
10.1
223
12.5×25
10.1
243
16×25
12.1
277
16×25
12.1
277
16×25
12.1
277
16×31.5
12.1
304
47
12.5×20
7.06
266 12.5×20
7.06
265
12.5×25
7.06
295
16×25
8.47
330
16×25
8.47
330
16×31.5
8.47
361
16×35.5
8.47
380
100
12.5×25
3.32
422
16×25
3.32
483
3.32
528
18×31.5
3.98
567
18×31.5
3.98
507
̶
̶
̶
̶
̶
̶
18×35.5
1.51
882
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
220
16×31.5
1.51
783
330
18×35.5
1.01
1080
̶
16×31.5
(Note) Rated ripple current : 85℃, 120Hz ; ESR. : 20℃, 120Hz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
R2B
R2B
MINIATURE
MINIATUREALUMINUM
ALUMINUMELECTROLYTIC
ELECTROLYTICCAPACITORS
CAPACITORS
Standard Bipolar Capacitors
●
®
AntiGREEN
cleaning
CAP
solvent
Guarantees 2000 hours at 85℃.
Bipolar
R2B
Marking color : White print on a blue sleeve
Specifications
Performance
−40 to +85
±20
Item
Category temperature range (℃)
Tolerance at rated capacitance (%)
Leakage current (µA)
(max.)
(20℃,120Hz)
0.03CV + 3 (after 5 minutes) C : Rated capacitance (µF) ; V : Rated voltage (V)
Rated voltage (V)
tanδ (max.)
Tangent of loss angle
(tanδ)
6.3
0.24
10
0.24
16
0.20
25
0.20
35
0.16
(20℃)
50
0.14
63
0.12
100
0.10
(20℃,120Hz)
0.02 is added to every 1000µF increase over 1000µF
Rated voltage (V)
Impedance ratio
Z−25℃/Z+20℃
Z−40℃/Z+20℃
(max.)
Characteristics at high
and low temperature
6.3
4
10
10
3
8
16
2
6
25
2
4
35
2
3
50
2
3
63
2
3
100
2
3
(120Hz)
0.5 for −25℃, 1 for −40℃ are added to every 1000µF increase over 1000µF
2000 hours (with the polarity inverted every 250 hours)
The initial specified value or less
Within ±20% of initial value
150% or less of the initial specified value
Test time
Leakage current
Percentage of capacitance change
Tangent of the loss angle
Endurance (85℃)
(Applied ripple current)
Shelf life (85℃)
Applicable standards
Test time : 1000hours ; other items are same as the endurance. Voltage application treatment : According to JIS C5101-4 4.1
JIS C5101 - 1,- 4 (IEC 60384 - 1,- 4)
Outline Drawing
Coefficient of Frequency for Rated Ripple Current
Unit : mm
Vent (except φ5)
Sleeve
F±0.5
φD+0.5/0
φd±0.05 copper plated steel wire (tinned)
15min.
L+α max.
Frequency (Hz)
Rated voltage (V)
50・60
120
1k
10k・100k
6.3 to 16
25 to 35
50 to 100
0.8
0.8
0.8
1
1
1
1.1
1.5
1.6
1.2
1.7
1.9
Part numbering system (example : 10V1000µF)
5
min.
R2B
̶
Series code
φD
F
φd
5
2.0
0.5
6.3
2.5
0.5
α
8
3.5
0.6
10
5.0
0.6
12.5
16
18
5.0
7.5
7.5
0.6
0.8
0.8
2.0
(φ10,16L or less : 1.5)
1.5
10
V
Rated voltage
symbol
102
Ⅰ5 # ̶
M
Taping(Forming)
symbol
Rated capacitance
Capacitance
Casing
symbol
tolerance symbol symbol
Casing symbol
Casing
Symbol
E3
F3
G3
Case
φD×L (mm)
5×11
6.3×11
8×11.5
Case
φD×L (mm)
10×12.5
10×16
10×20
Casing
Symbol
H3
H4
H5
Casing
Symbol
Ⅰ5
Ⅰ6
J6
Case
φD×L (mm)
12.5×20
12.5×25
16×25
Case
φD×L (mm)
16×31.5
18×35.5
Casing
Symbol
J7
K8
Standard Ratings
6.3
Rated voltage (V)
Rated
capacitance (µF)
Item
Case
φD×L (mm)
10
Rated ripple
current
Case
16
Rated ripple
current
Case
25
Rated ripple
current
Case
35
Rated ripple
current
Case
50
Rated ripple
current
Case
63
Rated ripple
current
Case
Rated ripple
current
Case
100
Rated ripple
current
(mArms) φD×L (mm) (mArms) φD×L (mm) (mArms) φD×L (mm) (mArms) φD×L (mm) (mArms) φD×L (mm) (mArms) φD×L (mm) (mArms) φD×L (mm) (mArms)
1
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
5×11
14
̶
5×11
16
2.2
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
5×11
21
5×11
23
5×11
24
3.3
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
5×11
26
5×11
28
6.3×11
34
4.7
̶
̶
̶
̶
̶
̶
6.3×11
41
10
̶
̶
̶
̶
22
̶
̶
5×11
52
̶
5×11
28
5×11
28
5×11
31
5×11
34
6.3×11
57
5×11
39
5×11
40
5×11
42
5×11
45
5×11
58
5×11
60
6.3×11
71
6.3×11
77
8×11.5
89
6.3×11
8×11.5
70
10×16
136
181
33
5×11
58
5×11
63
5×11
71
6.3×11
84
87
8×11.5
111
10×12.5
144
10×20
47
5×11
69
5×11
75
6.3×11
97
6.3×11
100
8×11.5
122
10×12.5
157
10×16
188
12.5×20
248
100
6.3×11
115
6.3×11
126
8×11.5
167
10×12.5
204
10×12.5
212
10×20
273
12.5×20
343
16×25
458
18×35.5
837
220
8×11.5
202
8×11.5
221
10×12.5
294
10×16
332
10×20
375
12.5×25
506
16×25
645
330
8×11.5
247
10×12.5
322
10×16
394
10×20
444
12.5×20
526
12.5×25
620
̶
̶
̶
̶
470
10×12.5
350
10×16
420
10×20
513
12.5×20
607
12.5×25
685
16×25
861
̶
̶
̶
̶
1000
10×20
611
12.5×20
767
12.5×25
935
16×25
1120
1270
̶
̶
̶
̶
̶
̶
2200
12.5×25
1090
16×25
1380
1660
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
3300
16×25
1490
16×31.5
1760
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
4700
16×31.5
1880
18×35.5
2280
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
16×31.5
16×31.5
(Note) Rated ripple current : 85℃, 120Hz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
RJP
RJP
MINIATURE
ALUMINUM
ELECTROLYTIC
CAPACITORS
MINIATURE
ALUMINUM
ELECTROLYTIC
CAPACITORS
105°C Bipolar Capacitors
●
®
AntiGREEN
cleaning
CAP
solvent
Guarantees 2000 hours at 105℃.
RJP
High temperature
R2B
Marking color : White print on a black sleeve
Specifications
Performance
−40 to +105
±20
Item
Category temperature range (℃)
Tolerance at rated capacitance (%)
Leakage current (µA)
(max.)
(20℃,120Hz)
0.03CV + 3 (after 5 minutes) C : Rated capacitance (µF) ; V : Rated voltage (V)
Rated voltage (V)
tanδ (max.)
Tangent of loss angle
(tanδ)
6.3
0.4
10
0.3
16
0.2
(20℃)
25
0.2
35
0.16
50
0.14
(20℃,120Hz)
0.02 is added to every 1000µF increase over 1000µF
Rated voltage (V)
Impedance ratio
Z−25℃/Z+20℃
Z−40℃/Z+20℃
(max.)
Characteristics at high
and low temperature
6.3
5
10
10
4
8
16
3
6
25
2
4
35
2
3
50
2
3
(120Hz)
0.5 for −25℃, 1 for −40℃ are added to every 1000µF increase over 1000µF
2000 hours (φ5 to φ8 : 1000 hours) with the polarity inverted every 250 hours
The initial specified value or less
Within ±20% of initial value
200% or less of the initial specified value
Test time
Leakage current
Percentage of capacitance change
Tangent of the loss angle
Endurance (105℃)
(Applied ripple current)
Shelf life (105℃)
Applicable standards
Test time : 1000hours ; other items are same as the endurance. Voltage application treatment : According to JIS C5101-4 4.1
JIS C5101 - 1,- 4 (IEC 60384 - 1,- 4)
Outline Drawing
Unit : mm
Vent (except φ5)
Sleeve
F±0.5
φD+0.5/0
φd±0.05 copper plated steel wire (tinned)
15min.
L+α max.
Coefficient of Frequency for Rated Ripple Current
Frequency (Hz)
Rated voltage (V)
50・60
120
1k
10k・100k
6.3 to 16
25 to 35
50
0.8
0.8
0.8
1
1
1
1.1
1.5
1.6
1.2
1.7
1.9
Part numbering system (example : 10V1000µF)
5
min.
RJP
̶
Series code
φD
F
φd
5
2.0
0.5
α
6.3
2.5
0.5
8
3.5
0.6
10
5.0
0.6
12.5
16
18
5.0
7.5
7.5
0.6
0.8
0.8
2.0
(φ10,16L or less : 1.5)
1.5
10
V
Rated voltage
symbol
102
M
Ⅰ5 # ̶
Taping(Forming)
symbol
Rated capacitance
Capacitance
Casing
symbol
tolerance symbol symbol
Casing symbol
Case
φD×L (mm)
5×11
6.3×11.5
8×11.5
Casing
Symbol
E3
F3
G3
Case
φD×L (mm)
10×12.5
10×16
10×20
Casing
Symbol
H3
H4
H5
Case
φD×L (mm)
12.5×20
12.5×25
16×25
Casing
Symbol
Ⅰ5
J6
Case
φD×L (mm)
16×31.5
18×35.5
Casing
Symbol
J7
K8
Standard Ratings
Rated voltage (V)
Rated
capacitance (µF)
Item
6.3
10
16
25
35
50
Rated ripple
Rated ripple
Rated ripple
Rated ripple
Rated ripple
Rated ripple
Case
Case
Case
Case
Case
Case
current
current
current
current
current
current
φD × L
(mm)(mArms) φD × L
(mm)(mArms) φD × L
(mm)(mArms) φD × L
(mm)(mArms) φD × L
(mm)(mArms) φD × L
(mm)(mArms)
1
—
—
—
—
—
—
—
—
—
—
5 × 11
12
2.2
—
—
—
—
—
—
—
—
—
—
5 × 11
18
—
3.3
—
—
—
—
—
—
—
—
4.7
—
—
—
—
—
—
—
—
10
—
—
—
—
22
—
—
5 × 11
42
—
5 × 11
22
5 × 11
25
5 × 11
22
5 × 11
30
5 × 11
34
5 × 11
30
6.3 × 11.5
37
5 × 11
40
6.3 × 11.5
55
6.3 × 11.5
51
8 × 11.5
63
33
5 × 11
46
5 × 11
45
5 × 11
49
6.3 × 11.5
56
8 × 11.5
72
8 × 11.5
77
47
5 × 11
54
5 × 11
54
6.3 × 11.5
67
6.3 × 11.5
67
8 × 11.5
86
10 × 12.5
105
100
6.3 × 11.5
90
6.3 × 11.5
96
8 × 11.5
110
220
8 × 11.5
150
8 × 11.5
150
10 × 12.5
195
8 × 11.5
10 × 16
110
10 × 16
160
10 × 20
190
215
12.5 × 20
290
12.5 × 25
340
330
8 × 11.5
185
10 × 16
240
10 × 16
265
12.5 × 20
320
12.5 × 20
350
16 × 25
460
470
10 × 12.5
260
10 × 16
290
10 × 20
345
12.5 × 20
380
12.5 × 25
465
16 × 31.5
590
1000
10 × 20
460
12.5 × 20
510
12.5 × 25
605
16 × 25
670
2200
12.5 × 25
820
16 × 25
910
16 × 31.5
1070
3300
16 × 25
1110
16 × 31.5
1200
18 × 35.5
1400
18 × 35.5
1520
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
4700
16 × 31.5
1430
6800
18 × 35.5
1830
—
18 × 35.5
—
16 × 31.5
805
—
—
1140
—
—
—
—
—
—
—
—
—
(Note) Rated ripple current : 105℃ , 120Hz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
RLB
MINIATURE
MINIATUREALUMINUM
ALUMINUMELECTROLYTIC
ELECTROLYTICCAPACITORS
CAPACITORS
Low Leakage Current Capacitors
●
GREEN
CAP
Low leakage current (after 1 minute) : 0.006CV or 0.5 (µA).
Marking color : White print on a blue sleeve
Specifications
Item
Performance
−40 to +85
±20
0.006CV or 0.5 whichever is larger (after 1 minute)
0.002CV or 0.3 whichever is larger (after 2 minutes), C : Rated capacitance (µF) ; V : Rated voltage (V)
Category temperature range (℃)
Tolerance at rated capacitance (%)
Leakage current (µA)
(max.)
Rated voltage (V)
More than 1µF
tanδ (max.)
1µF
Tangent of loss angle
(tanδ)
6.3
0.20
0.06
10
0.17
0.06
16
0.13
0.06
25
0.10
0.06
(20℃,120Hz)
(20℃)
35
0.10
0.06
50
0.08
0.06
(20℃,120Hz)
Rated voltage (V)
Z−25℃/Z+20℃
Z−40℃/Z+20℃
Characteristics at high
and low temperature
6.3
4
8
Impedance ratio (max.)
10
3
6
16
2
4
25
2
4
35
2
3
50
2
3
(120Hz)
Test time
Leakage current
Percentage of capacitance change
Tangent of the loss angle
Endurance (85℃)
(Applied ripple current)
Shelf life (85℃)
Applicable standards
1000 hours
The initial specified value or less
Within ±20% of initial value
150% or less of the initial specified value
Test time : 1000hours ; other items are same as the endurance. Voltage application treatment : According to JIS C5101-4 4.1
JIS C5101 - 1,- 4 (IEC 60384 - 1,- 4)
Outline Drawing
Unit : mm
Coefficient of Frequency for Rated Ripple Current
Rated voltage (V)
Vent (except φ5)
Sleeve
φd±0.05 copper plated steel wire (tinned)
Frequency (Hz)
CV (µF×V)
35 to 50
F±0.5
φD+0.5/0
16 to 25
L+α max.
φD
F
φd
5
2.0
0.5
α
6.3
2.5
0.5
8
3.5
0.6
10
5.0
0.6
RLB
12.5
5.0
0.6
16
7.5
0.8
̶
10
V
Rated voltage
symbol
Series code
18
7.5
0.8
1k
10k・100k
1
1
1
1
1.1
1.5
1.2
1.6
1.2
1.7
1.3
1.9
# ̶
102
M
Ⅰ6
Rated capacitance
symbol
Capacitance
tolerance symbol
Casing
symbol
Taping(Forming)
symbol
Casing symbol
2.0
(φ10,16L or less : 1.5)
1.5
120
0.8
0.8
0.8
0.8
Part numbering system (example : 10V1000µF)
5
min.
15min.
50・60
All CV value
≦1000
1000<
All CV value
6.3 to 10
Case
φD×L (mm)
5×11
6.3×11
8×11.5
Casing
symbol
E3
F3
G3
Case
10×12.5
10×16
10×20
Casing
symbol
H3
H4
H5
φD×L (mm)
Case
φD×L (mm)
12.5×20
12.5×25
16×25
Casing
symbol
Ⅰ5
Ⅰ6
J6
Case
φD×L (mm)
16×31.5
16×35.5
18×35.5
Casing
symbol
J7
J8
K8
Standard Ratings
Rated voltage (V)
6.3
10
16
25
35
50
Case
Rated ripple current
Case
Rated ripple current
Case
Rated ripple current
Case
Rated ripple current
Case
Rated ripple current
Case
Rated ripple current
φD×L (mm)
(mArms)
φD×L (mm)
(mArms)
φD×L (mm)
(mArms)
φD×L (mm)
(mArms)
φD×L (mm)
(mArms)
φD×L (mm)
(mArms)
1
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
5×11
20
2.2
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
5×11
26
3.3
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
5×11
32
4.7
̶
̶
̶
̶
̶
̶
6.3×11
43
10
̶
̶
̶
̶
5×11
43
22
̶
̶
5×11
56
6.3×11
74
33
̶
̶
6.3×11
79
6.3×11
47
̶
̶
6.3×11
94
8×11.5
100
̶
̶
160
10×12.5
Item
Rated
capacitance (µF)
8×11.5
5×11
34
5×11
34
6.3×11
57
6.3×11
57
8×11.5
75
8×11.5
99
8×11.5
99
10×12.5
131
90
8×11.5
121
10×12.5
144
10×16
176
127
10×12.5
172
10×12.5
172
10×16
210
220
10×16
270
10×20
300
12.5×20
380
720
220
10×12.5
260
10×16
350
10×20
390
12.5×20
510
12.5×25
550
16×25
330
10×16
350
10×20
420
12.5×20
550
12.5×25
680
16×25
790
16×31.5
970
470
10×20
460
12.5×20
570
12.5×20
650
16×25
940
16×25
940
16×35.5
1210
1000
12.5×25
840
12.5×25
910
16×25
1210
2200
16×25
1440
18×35.5
2200
16×31.5
1710
16×35.5
̶
1580
̶
18×35.5
̶
1690
̶
̶
̶
̶
̶
(Note) Rated ripple current : 85℃, 120Hz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
RJ5
RJ5
MINIATURE
ALUMINUM
ELECTROLYTIC
CAPACITORS
MINIATURE
ALUMINUM
ELECTROLYTIC
CAPACITORS
105°C Miniature Capacitors
●
GREEN
CAP
105˚C
1000hours
®
Anticleaning
solvent
250V Max.
Case size is one rank smaller than Series RJ4.
Miniaturized
RJ5
RJ4
Marking color : White print on a black sleeve
Specifications
Performance
Item
Category temperature range (℃)
−55∼+105
Rated voltage (V)
6.3∼100
−40∼+105
160∼450
(20℃,120Hz)
±20
Tolerance at rated capacitance (%)
CV ≦ 1000 : 0.1CV+40 (after 1 minute)
CV > 1000 : 0.04CV+100 (after 1 minute)
0.03CV or 4 whichever is larger (after 1 minute)
0.01CV or 3 whichever is larger (after 2 minutes)
Leakage current (µA)
(max.)
C : Rated capacitance (µF) ; V : Rated voltage (V)
Rated voltage (V)
Tangent of loss angle
(tanδ)
tanδ(max.)
(20℃)
6.3
10
16
25
35
50
63
100
160
200
250
315
350
400
450
0.34
0.26
0.20
0.16
0.14
0.12
0.10
0.08
0.20
0.20
0.20
0.24
0.24
0.24
0.24
0.02 is added to every 1000µF increase over 1000µF.
Rated voltage (V)
6.3
10
16
25
35
50
63
100
160 to 250
5
4
3
2
2
2
2
2
4
4
10
8
6
4
3
3
3
3
15
10
Impedance Z−25℃/Z+20℃
ratio
(max.) Z−40℃/Z+20℃
Characteristics at high
and low temperature
(20℃,120Hz)
315 to 450
(120Hz)
2000 hours (φ5 to φ8, 100V or less : 1000 hours)
Test time
The initial specified value or less
Leakage current
Endurance (105℃)
(Applied ripple current)
Within ±20% of initial value
Percentage of capacitance change
200% or less of the initial specified value
Tangent of the loss angle
Shelf life (105℃)
Test time : 1000hours ; other items are same as the endurance. Voltage application treatment : According to JIS C5101-4 4.1
Applicable standards
JIS C5101 - 1,- 4 (IEC 60384 - 1,- 4)
Outline Drawing
Unit : mm
Coefficient of Frequency for Rated Ripple Current
Rated voltage (V) Rated
Vent (except φ5)
Sleeve
F±0.5
φD+0.5/0
6.3 to 100
L+αmax.
15min.
160 to 450
5
min.
α
5
2.0
0.5
6.3
2.5
0.5
2.0
8
3.5
0.6
10
5.0
0.6
1.5
2.0
1
100
330
2200
1
to
to
to
to
to
47
220
1000
22000
470
50・60
120
1k
10k
100k
0.8
0.8
0.8
0.8
0.8
1
1
1
1
1
1.5
1.2
1.2
1.1
1.3
1.7
1.3
1.2
1.1
1.4
2.0
1.4
1.3
1.1
1.6
Part numbering system (example : 10V1000µF)
RJ5
φD
F
φd
Frequency (Hz)
capacitance (µF)
φd±0.05 copper plated steel wire (tinned)
12.5
5.0
0.6
16
7.5
0.8
18
7.5
0.8
≦100V : 2.0
≧160V : 2.5
Series code
̶
10
Rated voltage
symbol
V
102
M
Rated capacitance Capacitance
symbol
tolerance symbol
H3 #
Casing
symbol
̶
Optional
symbol
Taping(Forming)
symbol
In the case of 160V or beyond, should put in optional symbol "B".
Casing symbol
Size
Size
Size
Size
Casing
Casing
Casing
Casing
φD×L(mm) Symbol φD×L(mm) Symbol φD×L(mm) Symbol φD×L(mm) Symbol
16×20
J5
18×20
K5
10×12.5
5×11
E3
H3
16×25
J6
10×16
6.3×11
F3
H4
18×25
K6
16×31.5
J7
10×20
8×11.5
G3
H5
18×31.5
K7
18×35.5
K8
12.5×20
―
―
Ⅰ5
16×35.5
J8
12.5×25
Ⅰ6
―
―
―
―
18×40
K9
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
RJ5
RJ5
®
MINIATURE ALUMINUM
ELECTROLYTIC CAPACITORS
MINIATURE ALUMINUM ELECTROLYTIC
CAPACITORS
Standard Ratings
Rated voltage (V)
Rated
capacitance (µF)
Item
6.3
10
Rated ripple
current
Case
φD×L (mm)
16
Rated ripple
current
Case
25
Rated ripple
current
Case
35
Rated ripple
current
Case
50
Rated ripple
current
Case
63
Rated ripple
current
Case
100
Rated ripple
current
Case
Case
Rated ripple
current
(mArms) φD×L (mm) (mArms) φD×L (mm) (mArms) φD×L (mm) (mArms) φD×L (mm) (mArms) φD×L (mm) (mArms) φD×L (mm) (mArms) φD×L (mm) (mArms)
1
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
5×11
15
̶
̶
5×11
15
2.2
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
5×11
22
̶
̶
5×11
21
3.3
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
5×11
27
̶
̶
5×11
29
4.7
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
5×11
32
̶
̶
5×11
32
10
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
5×11
47
̶
̶
5×11
50
22
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
5×11
70
5×11
71
33
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
5×11
90
6.3×11
100
47
̶
̶
̶
̶
̶
̶
̶
̶
5×11
93
6.3×11
115
6.3×11
68
̶
̶
̶
̶
̶
̶
̶
̶
6.3×11
110
6.3×11
150
8×11.5
100
̶
̶
̶
̶
̶
̶
5×11
125
6.3×11
151
8×11.5
190
8×11.5
220
̶
̶
5×11
155
6.3×11
190
6.3×11
200
8×11.5
270
10×12.5
314
330
̶
̶
6.3×11
210
6.3×11
225
8×11.5
310
10×12.5
384
10×16
470
̶
̶
6.3×11
250
8×11.5
323
10×12.5
429
10×16
470
8×11.5
130
120
8×11.5
140
155
10×12.5
190
200
10×16
240
10×16
335
12.5×20
390
421
10×20
510
̶
10×20
540
12.5×20
640
16×25
715
12.5×25
930
18×35.5
960
398
10×12.5
460
10×12.5
500
10×16
610
12.5×20
857
1000
16×25
10×16
635
10×16
705
10×20
710
12.5×25
1180
16×25
1380
16×31.5
1410
18×35.5
3300
10×20
882
12.5×20
1010
12.5×25
1200
16×25
1440
16×31.5
1500
18×35.5
1990
4700
12.5×20
1120
12.5×25
1260
16×25
1500
16×25
1570
16×35.5
1780
̶
6800
12.5×25
1380
16×25
1570
16×25
1600
16×35.5
1850
18×40
2000
10000
16×25
1750
16×31.5
1820
16×35.5
1930
18×40
2000
̶
15000
16×31.5
1820
16×35.5
2050
18×40
2210
̶
̶
22000
18×35.5
2280
18×40
2420
̶
̶
̶
Rated ripple
current
Case
Rated ripple
current
Case
Rated ripple
current
Case
Rated voltage (V)
Item
Rated
capacitance (µF)
160
Case
200
250
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
Rated ripple
current
Case
Rated ripple
current
Case
Rated ripple
current
Case
350
—
—
—
—
—
—
—
—
—
—
—
—
—
6.3×11
3.3
—
—
—
—
6.3×11
35
6.3×11
4.7
—
—
6.3×11
6.3×11
42
6.3×11
61
8×11.5
42
72
8×11.5
72
10×16
135
10×20
150
8×11.5
—
6.3×11
26
6.3×11
35
Rated ripple
current
140
12.5×20
140
12.5×25
170
12.5×25
195
12.5×25
195
16×20
225
16×25
296
47
10×20
220
—
—
12.5×20
250
—
—
68
12.5×25
330
460
16×31.5
390
380
18×25
380
500
16×35.5
500
18×25
460
18×25
460
18×31.5
505
18×35.5
540
18×31.5
560
18×31.5
560
18×35.5
588
18×40
615
18×35.5
648
18×40
688
—
—
12.5×25
400
16×25
465
16×35.5
16×20
430
18×20
465
16×31.5
560
16×25
570
16×31.5
625
16×35.5
655
18×20
570
18×25
615
18×25
615
180
18×25
675
18×31.5
735
18×40
220
18×25
745
18×35.5
855
790
810
286
16×31.5
350
18×31.5
350
18×25
18×20
16×35.5
16×25
18×20
350
355
675
240
390
16×20
685
—
195
16×20
16×31.5
305
16×31.5
—
12.5×25
18×20
12.5×20
18×25
49
12.5×20
210
510
41
10×12.5
135
12.5×20
510
10×12.5
35
12.5×20
185
16×25
—
8×11.5
86
10×20
18×20
—
26
12
20
10×20
170
510
8×11.5
35
6.3×11
67
10×16
510
—
10×16
33
16×25
—
—
67
135
18×20
—
21
10×16
10×16
430
8×11.5
—
74
125
150
450
10×16
10×12.5
16×20
—
21
22
120
400
φD×L(mm)
(mArms)φD×L(mm)
(mArms)φD×L(mm)
(mArms)φD×L(mm)
(mArms)φD×L(mm)
(mArms)φD×L(mm)
(mArms)φD×L(mm)
(mArms)
1
100
̶
1650
315
2.2
10
93
8×11.5
2200
1000
6.3×11
18×35.5
648
18×40
688
750
—
—
—
—
—
—
—
—
—
—
—
—
—
—
330
—
—
18×40
1090
—
—
—
—
—
—
—
—
—
—
470
18×40
1300
—
—
—
—
—
—
—
—
—
—
—
—
(Note) Rated ripple current : 105°C, 120Hz ; ESR. : 20°C, 120Hz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
RJ4
RJ4
MINIATURE
ALUMINUM
ELECTROLYTIC
CAPACITORS
MINIATURE
ALUMINUM
ELECTROLYTIC
CAPACITORS
105°C Miniature Capacitors
●
●
GREEN
CAP
105˚C
2000hours
®
Anticleaning
solvent
250V Max.
Case size is one rank smaller than Series RJ3.
Guarantees 2000 hours at 105℃.
(φ5 to φ8 : 1000 hours)
Miniaturized
RJ4
RJ3
High temperature
Marking color : White print on a black sleeve
RE3
Specifications
Performance
Item
−55 to +105
Category temperature range (℃)
−40 to +105
6.3 to 100
Rated voltage (V)
160 to 450
±20
Tolerance at rated capacitance (%)
(20℃,120Hz)
CV ≦ 1000 : 0.1CV+40 (after 1 minute)
CV > 1000 : 0.04CV+100 (after 1 minute)
0.03CV or 4 whichever is larger (after 1 minute)
0.01CV or 3 whichever is larger (after 2 minutes)
Leakage current (µA)
(max.)
C : Rated capacitance (µF) ; V : Rated voltage (V)
Rated voltage (V)
Tangent of loss angle
(tanδ)
tanδ(max.)
(20℃)
6.3
10
16
25
35
50
63
100
160
200
250
315
350
400
450
0.28
0.24
0.20
0.16
0.14
0.12
0.10
0.08
0.20
0.20
0.20
0.24
0.24
0.24
0.24
0.02 is added to every 1000µF increase over 1000µF.
Rated voltage (V)
Characteristics at high
and low temperature
Impedance Z−25℃/Z+20℃
ratio
(max.) Z−40℃/Z+20℃
(20℃,120Hz)
6.3
10
16
25
35
50
63
100
160 to 250
5
4
3
2
2
2
2
2
4
315 to 450
4
10
8
6
4
3
3
3
3
15
10
(120Hz)
Test time
2000 hours (φ5 to φ8 : 1000 hours)
Leakage current
Endurance (105℃)
(Applied ripple current)
The initial specified value or less
Percentage of capacitance change
Within ±20% of initial value
Tangent of the loss angle
200% or less of the initial specified value
Shelf life (105℃)
Test time : 1000hours ; other items are same as the endurance. Voltage application treatment : According to JIS C5101-4 4.1
Applicable standards
JIS C5101 - 1,- 4 (IEC 60384 - 1,- 4)
Outline Drawing
Unit : mm
Coefficient of Frequency for Rated Ripple Current
Rated voltage (V) Rated
Vent (except φ5)
Sleeve
φd±0.05 copper plated steel wire (tinned)
F±0.5
φD+0.5/0
15min.
160 to 450
5
min.
5
2.0
0.5
6.3
2.5
0.5
2.0
8
3.5
0.6
1.5
10
5.0
0.6
2.0
12.5
5.0
0.6
120
1k
10k
100k
0.8
0.8
0.8
0.8
0.8
1
1
1
1
1
1.5
1.2
1.2
1.1
1.3
1.7
1.3
1.2
1.1
1.4
2.0
1.4
1.3
1.1
1.6
Part numbering system (example : 16V2200µF)
RJ4
φD
F
φd
α
50・60
1 to 47
100 to 220
330 to 1000
2200 to 22000
1 to 330
6.3 to 100
L+α max.
Frequency (Hz)
capacitance (µF)
16
7.5
0.8
2.5
18
7.5
0.8
Series code
̶
16
Rated voltage
symbol
V
222
M
Rated capacitance
Capacitance
symbol
tolerance symbol
Ⅰ5 #
Casing
symbol
̶
Optional
symbol
Taping(Forming)
symbol
Casing symbol
Size
φD×L (mm)
5×11
6.3×11
8×11.5
10×12.5
10×16
10×20
12.5×20
Size
Casing
Casing
Symbol φD×L (mm) Symbol
12.5×25
Ⅰ6
E3
16×25
J6
F3
16×31.5
J7
G3
16×35.5
J8
H3
18×31.5
K7
H4
18×35.5
K8
H5
18×40
K9
Ⅰ5
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
RJ4
®
MINIATURE ALUMINUM ELECTROLYTIC
CAPACITORS
MINIATURE ALUMINUM
ELECTROLYTIC CAPACITORS
RJ4
Standard Ratings
Rated voltage
(V)
6.3
Item Case
Rated
capacitance
(µF)
ESR
10
Rated
ripple
current
Case
(mArms) φD×L
(mm)
ESR
16
Rated
ripple
current
Case
ESR
Case
35
Rated
ripple
current
Case
50
Rated
ripple
current
Case
(Ω)
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
5×11
2.2
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
5×11
3.3
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
4.7
̶
̶
̶
̶
̶
̶
̶
̶
̶
5×11
56.5
27
5×11
49.4
10
̶
̶
̶
̶
̶
̶
5×11
33.2
37
5×11
26.5
39
5×11
22
̶
̶
̶
̶
̶
̶
5×11
15.1
54
5×11
12.1
58
5×11
33
̶
̶
̶
̶
̶
̶
5×11
10.1
67
5×11
8.04
71
5×11
7.04
(Ω)
(mArms) φD×L
(mm)
ESR
1
(Ω)
(mArms) φD×L
(mm)
ESR
φD×L
(mm)
(Ω)
(mArms) φD×L
(mm)
25
Rated
ripple
current
(Ω)
(mArms) φD×L
(mm)
ESR
(Ω)
63
Rated
ripple
current
Case
(mArms) φD×L
(mm)
ESR
(Ω)
100
Rated
ripple
current
Case
(mArms) φD×L
(mm)
ESR
Rated
ripple
current
(Ω)
(mArms)
15
̶
̶
̶
5×11
90.5
22
̶
̶
̶
5×11
60.3
21
5×11
60.3
27
̶
̶
̶
5×11
40.2
29
30
5×11
42.4
32
̶
̶
̶
5×11
28.2
32
23.2
43
5×11
19.9
47
5×11
16.6
46
6.3×11
13.3
54
10.6
64
5×11
9.05
70
5×11
7.54
71
6.3×11
78
5×11
6.03
90
6.3×11
5.03
100
6.3×11
6.3×11
199
133
15
6.03
93
8×11.5
4.02
130
47
̶
̶
̶
5×11
8.47
72
5×11
7.06
79
5×11
5.65
84
5×11
4.94
90
4.24
115
3.53
120
10×12.5
2.82
165
100
̶
̶
̶
5×11
3.98
105
5×11
3.32
115
6.3×11
2.65
141
6.3×11
2.32
151
8×11.5
1.99
190
10×12.5
1.66
215
10×20
1.33
265
220
5×11
2.11
140
6.3×11
1.81
166
6.3×11
1.51
190
8×11.5
1.21
247
10×12.5
1.06
314
10×12.5
0.91
314
10×16
0.75
335
12.5×25
0.60
440
330
6.3×11
1.41
195
6.3×11
1.21
210
8×11.5
1.01
271
10×12.5
0.81
360
10×12.5
0.70
384
10×16
0.60
421
10×20
0.50
510
12.5×25
0.40
540
470
6.3×11
0.99
232
8×11.5
0.85
325
8×11.5
0.71
323
10×12.5
0.57
429
10×16
0.50
470 12.5×20
0.42
628 12.5×20
0.35
640
16×25
0.28
715
0.47
398
10×12.5
0.40
457
10×16
0.33
560
10×20
0.27
705
12.5×20
0.23
857 12.5×25
0.20
1000
16×25
0.17
930
18×40
0.13
985
961 12.5×25
0.14
1180
16×25
0.12
1380
16×35.5
0.11
1660
̶
̶
̶
̶
̶
̶
18×35.5
0.08
1990
̶
̶
̶
̶
̶
̶
1000
8×11.5
2200
10×20
0.23
720
10×20
0.20
761 12.5×20
0.17
3300
10×20
0.16
882
12.5×20
0.14
1010 12.5×25
0.12
1200
16×25
0.10
1440
16×35.5
0.09
1780
4700
12.5×20
0.12
1120
12.5×25
0.11
1250
16×25
0.09
1490
16×31.5
0.08
1880
18×35.5
0.07
2120
̶
̶
̶
̶
̶
̶
̶
̶
̶
6800
12.5×25
0.09
1380
16×25
0.08
1570
16×35.5
0.07
1830
18×35.5
0.06
2330
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
10000
16×25
0.08
1750
16×35.5
0.07
1910
18×35.5
0.06
2220
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
15000
16×35.5
0.06
2040
18×35.5
0.06
2190
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
22000
18×40
0.05
2390
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
Rated
ripple
current
Case
Rated
ripple
current
Case
Rated
ripple
current
Case
Rated
ripple
current
Case
Rated
ripple
current
Case
Rated
ripple
current
Case
6.3×11
Rated voltage
(V)
160
Item Case
Rated
capacitance
(µF)
φD×L
(mm)
ESR
(Ω)
200
φD×L
(mArms) (mm)
ESR
(Ω)
250
φD×L
(mArms) (mm)
ESR
(Ω)
315
φD×L
(mArms) (mm)
1
6.3×11
332
16
6.3×11
332
16
6.3×11
332
16
2.2
6.3×11
151
23
6.3×11
151
23
6.3×11
151
23
3.3
6.3×11
101
28
6.3×11
101
28
101
4.7
6.3×11
8×11.5
ESR
(Ω)
350
φD×L
(mArms) (mm)
398
16
8×11.5
181
27
34
10×12.5
121
6.3×11
ESR
(Ω)
400
φD×L
(mArms) (mm)
398
16
8×11.5
181
27
38
10×12.5
121
38
6.3×11
ESR
(Ω)
450
φD×L
(mArms) (mm)
ESR
Rated
ripple
current
(Ω)
(mArms)
398
16
8×11.5
398
8×11.5
181
27
10×12.5
181
18
31
10×12.5
121
38
10×16
121
42
70.6
34
8×11.5
70.6
40
70.6
40
10×12.5
84.7
45
10×12.5
84.7
45
10×16
84.7
50
10×20
84.7
33.2
58
10×12.5
33.2
66
10×16
33.2
74
10×20
39.8
79
10×20
39.8
79
12.5×20
39.8
87
12.5×20
39.8
87
10×16
15.1
107
10×20
15.1
120
12.5×20
15.1
130
12.5×20
18.1
129
12.5×25
18.1
140
12.5×25
18.1
140
16×25
18.1
160
33
10×20
10.1
143
12.5×20
10.1
160
12.5×25
10.1
12.1
12.1
12.1
196
16×31.5
12.1
215
47
12.5×20
7.06
188
12.5×20
7.06
188
12.5×25
256
16×35.5
100
12.5×25
3.32
299
16×25
3.32
342
18×35.5
1.51
624
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
10
22
8×11.5
220
16×31.5
1.51
554
330
18×35.5
1.01
764
̶
̶
8×11.5
16×31.5
54
172
16×25
196
16×25
196
16×25
7.06
205
16×25
8.47
234
16×25
8.47
234
16×31.5
3.32
374
18×31.5
3.98
401
18×31.5
3.98
401
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
8.47
8.47
269
(Note) Rated ripple current : 105℃, 120Hz ; ESR. : 20℃, 120Hz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
RJ3
RJ3
MINIATURE
ELECTROLYTIC
CAPACITORS
MINIATUREALUMINUM
ALUMINUM
ELECTROLYTIC
CAPACITORS
GREEN
CAP
105°C Use, Standard Capacitors
●
105˚C
2000hours
®
Anticleaning
solvent
250V Max.
Guarantees 2000 hours at 105℃ (φ5 to φ8 : 1000 hours).
Miniaturized
High temperature
RJ4
RJ3
RE2
Marking color : White print on a black sleeve
Specifications
Item
Performance
Category temperature range (℃)
−55 to +105
Rated voltage (V)
6.3 to 100
−40 to +105
160 to 400
±20
Tolerance at rated capacitance (%)
(20°
C,120Hz)
0.03CV or 4 whichever is larger (after 1 minute)
0.01CV or 3 whichever is larger (after 2 minutes)
Leakage current (µA)
(max.)
CV ≦ 1000 : 0.1CV+40 (after 1 minute)
CV > 1000 : 0.04CV+100 (after 1 minute)
(20°
C)
C : Rated capacitance (µF) ; V : Rated voltage (V)
Rated voltage (V)
Tangent of loss angle
(tanδ)
tanδ(max.)
6.3
10
16
25
35
50
63
100
160
200
250
315
350
400
0.22
0.19
0.16
0.14
0.12
0.10
0.09
0.08
0.15
0.15
0.15
0.20
0.20
0.20
0.02 is added to every 1000µF increase over 1000µF.
Rated voltage (V)
Characteristics at high
and low temperature
Z−25℃/Z+20℃
Impedance
ratio
Z−40℃/Z+20℃
(max.)
Z−55℃/Z+20℃
(20°
C,120Hz)
6.3
10
16
25
35
50
63
100
160 to 250
4
3
2
2
2
2
2
2
3
315 to 400
3
̶
̶
̶
̶
̶
̶
̶
̶
8
6
8
6
4
3
3
3
3
3
̶
̶
(120Hz)
Test time
2000 hours (φ5 to φ8 : 1000 hours)
Leakage current
Endurance (105℃)
(Applied ripple current)
The initial specified value or less
Percentage of capacitance change
Within ±20% of initial value
200% or less of the initial specified value
Tangent of the loss angle
Shelf life (105℃)
Test time : 1000hours ; other items are same as the endurance. Voltage application treatment : According to JIS C5101-4 4.1
Applicable standards
JIS C5101 - 1,
- 4 (IEC 60384 - 1,
- 4)
Outline Drawing
Unit : mm
Coefficient of Frequency for Rated Ripple Current
Rated voltage (V) Rated
Sleeve
Vent (exceptφ5)
φd±0.05 copper plated steel wire (tinned)
F±0.5
φD+0.5/0
6.3 to 100
15min.
L+α max.
φD
F
φd
α
5
2.0
0.5
6.3
2.5
0.5
2.0
8
3.5
0.6
1.5
10
5.0
0.6
2.0
160 to 400
5
min.
12.5
5.0
0.6
Frequency (Hz)
capacitance (µF)
1 to 4.7
10 to 47
100 to 220
330 to 1000
2200 to 15000
1 to 220
50・60
120
1k
10k
100k
̶
̶
̶
̶
̶
0.8
0.4
0.5
0.7
0.8
0.9
1
0.7
0.8
0.9
0.9
1.0
1.3
0.8
0.9
0.9
1.0
1.0
1.4
1
1
1
1
1
1.6
Part numbering system (example : 63V1000µF)
16
7.5
0.8
2.5
18
7.5
0.8
RJ3
Series code
̶
63
Rated voltage
symbol
V
102
M
Rated capacitance
Capacitance
symbol
tolerance symbol
J7 #
Casing
symbol
̶
Optional
symbol
Taping(Forming)
symbol
Casing symbol
Size
Size
Casing
Casing
φD×L (mm) Symbol φD×L (mm) Symbol
5×11
Ⅰ6
E3
12.5×25
6.3×11
J6
F3
16×25
8×11.5
J7
G3
16×31.5
10×12.5
J8
H3
16×35.5
10×16
K8
H4
18×35.5
10×20
K9
H5
18×40
12.5×20
Ⅰ5
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
RJ3
RJ3
®
MINIATURE ALUMINUM ELECTROLYTIC
CAPACITORS
MINIATURE ALUMINUM
ELECTROLYTIC CAPACITORS
Standard Ratings
Rated voltage (V)
6.3
10
Impedance Rated ripple
16
ESR
φD×L (mm)
(Ω)
̶
̶
̶
̶
̶
̶
̶
̶
10
̶
̶
̶
̶
̶
̶
̶
̶
22
̶
̶
̶
̶
5×11
14.3
2.5
33
5×11
11.1
2.5
105
5×11
9.55
47
5×11
7.77
1.5
120
5×11
6.71
100
5×11
3.65
1.2
130
5×11
220
6.3×11
1.66
0.87
180
6.3×11
330
6.3×11
Rated
Capacitance (µF)
4.7
Case
Impedance Rated ripple
Case
Item
current
ESR
(Ω max.) (mArms) φD×L (mm)
current
Case
(Ω max.) (mArms) φD×L (mm)
(Ω)
̶
ESR
(Ω)
25
Impedance Rated ripple
(Ω max.) (mArms) φD×L (mm)
Impedance
Rated ripple
current
(Ω max.) (mArms)
(Ω)
5×11
49.4
3.0
92
5×11
23.2
2.5
92
1.9
105
5×11
10.6
1.9
105
8.04
1.5
120
5×11
7.04
1.5
120
5.65
1.2
130
5×11
4.94
1.2
130
2.65
0.58
220
6.3×11
2.32
0.58
220
1.21
0.47
290
8×11.5
1.06
0.39
315
500
̶
̶
5×11
26.5
2.5
92
5×11
12.1
1.9
105
5×11
1.5
120
5×11
3.15
1.2
130
6.3×11
1.43
0.58
220
8×11.5
ESR
Case
current
̶
85
1.11
0.58
220
8×11.5
0.96
0.47
265
8×11.5
0.81
0.39
315
10×12.5
0.70
0.23
470
8×11.5
0.78
0.39
315
8×11.5
0.67
0.39
315
10×12.5
0.57
0.23
500
10×16
0.50
0.18
1000
10×12.5
0.37
0.23
500
10×16
0.32
0.18
615
10×20
0.27
0.12
825
12.5×20
0.23
0.090
1050
615
2200
12.5×20
0.18
0.095
1000
12.5×20
0.16
0.090
1050
12.5×25
0.14
0.068
1300
16×25
0.12
0.056
1740
3300
12.5×20
0.13
0.090
1050
12.5×25
0.12
0.068
1300
16×25
0.10
0.056
1740
16×31.5
0.09
0.045
2110
4700
16×25
0.10
0.061
1670
16×25
0.09
0.056
1740
16×31.5
0.08
0.045
2110
18×35.5
0.07
0.036
2580
6800
16×25
0.08
0.056
1740
16×31.5
0.07
0.045
2110
18×35.5
0.06
0.036
2580
̶
̶
̶
̶
10000
16×31.5
0.06
0.045
2110
18×35.5
0.06
0.036
2580
̶
̶
̶
̶
̶
̶
̶
̶
15000
18×35.5
0.05
0.036
2580
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
Case
ESR
Case
ESR
Case
ESR
Impedance
Rated ripple
current
Rated voltage (V)
Item
Rated
Capacitance (µF)
35
Case
ESR
50
Impedance Rated ripple
current
(Ω max.) (mArms) φD×L (mm)
φD×L (mm)
(Ω)
1
̶
̶
̶
̶
5×11
2.2
̶
̶
̶
̶
5×11
3.3
̶
̶
̶
̶
4.7
5×11
42.4
2.5
10
5×11
19.9
22
5×11
33
5×11
47
6.3×11
100
8×11.5
63
Impedance Rated ripple
current
(Ω max.) (mArms) φD×L (mm)
(Ω)
(Ω)
100
Impedance Rated ripple
current
(Ω max.) (mArms) φD×L (mm)
(Ω max.) (mArms)
(Ω)
4.9
35
̶
̶
̶
̶
5×11
75.4
4.2
53
̶
̶
̶
̶
5×11
60.3
9.2
60
5×11
50.3
3.9
65
̶
̶
̶
̶
5×11
40.2
7.2
67
92
5×11
35.3
3.6
82
5×11
31.8
5.8
74
5×11
28.2
6.3
75
1.9
105
5×11
16.6
2.7
100
5×11
14.9
3.6
95
6.3×11
13.3
3.3
110
9.05
1.5
120
5×11
7.54
1.9
125
6.3×11
6.79
2.1
130
8×11.5
6.03
1.4
165
6.03
1.2
130
6.3×11
5.03
1.1
195
6.3×11
4.52
1.7
160
10×12.5
4.02
0.94
305
4.24
0.58
220
6.3×11
3.53
0.90
245
8×11.5
3.18
1.2
305
10×16
2.82
0.68
320
1.99
0.39
315
1.66
0.50
385
10×12.5
1.49
0.65
395
12.5×20
1.33
0.28
585
166
8×11.5
133
11
45
220
10×12.5
0.91
0.23
500
10×16
0.75
0.27
505
10×20
0.68
0.32
505
16×25
0.60
0.16
1120
330
10×16
0.60
0.18
615
10×20
0.50
0.18
675
12.5×20
0.45
0.22
660
16×25
0.40
0.13
1290
470
10×20
0.42
0.12
825
12.5×20
0.35
0.12
895
12.5×25
0.32
0.16
850
16×31.5
0.28
0.11
1350
1000
12.5×25
0.20
0.068
1300
16×25
0.17
0.076
1495
0.15
0.098
1430
̶
̶
̶
̶
18×35.5
0.09
0.050
2190
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
2200
16×31.5
0.11
0.045
2110
3300
18×35.5
0.08
0.036
2580
̶
̶
̶
16×31.5
(Note) Rated ripple current : 105°
C, 100kHz ; ESR. : 20°
C, 120Hz ; Impedance : 20°
C, 100kHz
Rated voltage (V)
Item
Rated
Capacitance (µF)
160
Case
ESR
200
Rated ripple
current
Case
ESR
250
Rated ripple
current
Case
(mArms)
φD×L
(mm)
(mArms)
φD×L
(mm)
1
6.3×11
248
18
6.3×11
248
18
6.3×11
2.2
6.3×11
113
26
6.3×11
113
26
φD×L
(mm)
(Ω)
(Ω)
ESR
315
Rated ripple
current
Case
(mArms)
φD×L
(mm)
248
18
6.3×11
8×11.5 113
(Ω)
ESR
350
Rated ripple
current
Case
(mArms)
φD×L
(mm)
331
16
6.3×11
30
8×11.5 150
(Ω)
ESR
(Ω)
400
Rated ripple
current
Case
ESR
Rated ripple
current
(mArms)
φD×L
(mm)
(Ω)
(mArms)
331
18
8×11.5 331
18
27
8×11.5 150
30
10×12.5 150
30
40
3.3
8×11.5
75.4
37
8×11.5
75.4
37
10×12.5
75.4
43
10×12.5 100
36
10×12.5 100
36
10×16
4.7
8×11.5
52.9
44
10×12.5
52.9
50
10×12.5
52.9
50
10×16
70.6
47
10×16
70.6
47
10×20
70.6
52
10×12.5
24.9
75
10×16
24.9
80
10×20
24.9
90
10×20
33.2
75
12.5×20
33.2
79
12.5×20
33.2
79
22
10×20
11.3
135
10×20
11.3
135
12.5×25
11.3
155
12.5×25
15.1
130
12.5×25
15.1
130
16×25
15.1
130
33
12.5×20
175
12.5×25
190
12.5×25
7.54
190
16×25
10.1
160
16×25
10.1
160
16×31.5
10.1
175
12.5×25
18×35.5
10
7.54
7.54
100
47
12.5×25
5.29
230
5.29
230
16×25
5.29
225
16×31.5
7.06
210
16×31.5
7.06
210
100
16×25
2.49
330
16×31.5
2.49
360
18×35.5
2.49
340
18×40
3.32
335
18×40
3.32
335
̶
̶
̶
220
18×35.5
1.13
500
18×40
1.13
525
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
7.06
220
(Note) Rated ripple current : 105°
C, 120Hz ; ESR. : 20°
C, 120Hz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
RJB
RJB
MINIATURE
ELECTROLYTIC
CAPACITORS
MINIATUREALUMINUM
ALUMINUM
ELECTROLYTIC
CAPACITORS
®
GREEN
CAP
105°C Use, Miniature, High-Reliability, Low Impedance Capacitors
●
●
Low
105˚C
Impedance 5000hours
Anticleaning
solvent
Smaller and higher ripple current than RJH Series.
Guarantees 5000 hours at 105°
C.
(φ5 to φ6.3 : 2000 hours ; φ8 to φ10 : 3000 hours)
Miniaturized
RJB
RJH
Marking color : White print on a black sleeve
Specifications
Item
Performance
Category temperature range (℃)
ー55 to +105
Tolerance at rated capacitance (%)
±20
Leakage current (µA)
(max.)
0.01CV + 1 (after 2 minutes) C : Rated capacitance (µF) ; V : Rated voltage (V)
Tangent of loss angle
(tanδ)
(20℃,120Hz)
(20℃)
Rated voltage (V)
6.3
10
16
25
35
50
63
100
tanδ (max.)
0.22
0.19
0.16
0.14
0.12
0.10
0.09
0.08
0.02 is added to every 1000µF increase over 1000µF.
Rated voltage (V)
Characteristics at high
and low temperature
Impedance ratio (max.)
Z−55℃/Z+20℃
(20℃,120Hz)
6.3
10
16
25
35
50
63
100
3
3
3
3
3
3
3
3
(120Hz)
Test time
Endurance (105℃)
(Applied ripple current)
5000 hours
Leakage current
The initial specified value or less
Percentage of capacitance change
Within ±20% of initial value
Tangent of the loss angle
200% or less of the initial specified value
Test time
1000 hours
Leakage current
Shelf life (105℃)
(φ5 to φ6.3 : 2000 hours)
(φ8 to φ10 : 3000 hours)
The initial specified value or less
Percentage of capacitance change
Within ±15% of initial value
150% or less of the initial specified value
Tangent of the loss angle
Voltage application treatment : According to JIS C5101-4 4.1
Applicable standards
JIS C5101 - 1,
- 4 (IEC 60384 - 1,
- 4)
Outline Drawing
Unit : mm
φd±0.05 copper plated steel wire (tinned)
Sleeve
F±0.5
φD+0.5/0
Vent (exceptφ5)
L+α max.
15min.
5
min.
Coefficient of Frequency for Rated Ripple Current
Frequency (Hz)
Rated
capacitance (µF)
3.3 to 180
220 to 390
470 to 1800
2200 to 3900
4700 to 10000
5
2.0
0.5
1.0
6.3
2.5
0.5
1.0
8
3.5
0.6
1.0
10
5.0
0.6
2.0
1k
10k
100k
0.40
0.50
0.60
0.75
0.85
0.75
0.85
0.88
0.90
0.95
0.90
0.95
0.96
0.98
1.00
1
1
1
1
1
Part numbering system (example : 10V1000µF)
RJB
φD
F
φd
α
120
12.5
5.0
0.6
2.0
16
7.5
0.8
2.0
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
Series code
̶
10
Rated voltage
symbol
V
102
M
H4 # ̶
Rated capacitance
Capacitance
Casing
symbol
tolerance symbol symbol
Taping(Forming)
symbol
CAT.No.2021/2022E
RJB
®
MINIATURE ALUMINUM ELECTROLYTIC
CAPACITORS
MINIATURE ALUMINUM
ELECTROLYTIC CAPACITORS
Standard Ratings
Rated voltage (V)
Item
Rated
capacitance (µF)
Case
φD×L (mm)
Casing
symbol
6.3
ripple
Impedance (Ω max.) Rated
current
20℃
−10℃
(mArms)
Case
φD×L (mm)
Casing
symbol
10
ripple
Impedance (Ω max.) Rated
current
20℃ −10℃
(mArms)
Case
φD×L (mm)
Casing
symbol
RJB
16
ripple
Impedance (Ω max.) Rated
current
20℃ −10℃
(mArms)
100
̶
̶
̶
̶
̶
5×11.5
E3
0.65
1.3
181
̶
̶
̶
̶
220
̶
̶
̶
̶
̶
6.3×11.5
F3
0.32
0.64
290
̶
̶
̶
̶
330
6.3×11.5
F3
0.32
0.64
290
8×12
G3
0.17
0.34
555
8×12
G3
0.17
0.34
470
8×12
G3
0.17
0.34
555
8×12
G3
0.17
0.34
555
10×12.5
H3
0.12
0.24
760
680
8×12
G3
0.17
0.34
555
10×12.5
H3
0.12
0.24
760
10×16
H4
0.080
0.16
1050
1000
10×12.5
H3
0.12
0.24
760
10×16
H4
0.080
0.16
1050
10×20
H5
0.062
0.124
1220
2200
10×25
H6
0.052
0.104
1440
12.5×20
Ⅰ5
0.042
0.084
1690
12.5×25
Ⅰ6
0.034
0.068
1950
3300
12.5×20
Ⅰ5
0.042
0.084
1690
12.5×25
Ⅰ6
0.034
0.068
1950
16×25
J6
0.028
0.056
2560
4700
12.5×30
Ⅰ7
0.030
0.060
2310
16×25
J6
0.028
0.056
2560
16×31.5
J7
0.025
0.050
3010
6800
16×25
J6
0.028
0.056
2560
16×31.5
J7
0.025
0.050
3010
̶
̶
̶
̶
̶
16×31.5
J7
0.025
0.050
3010
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
Case
Rated ripple
current
Case
Rated ripple
current
Case
φD×L (mm)
Casing
symbol
φD×L (mm)
Casing
symbol
22
̶
33
̶
10000
25
Rated voltage (V)
Item
Rated
capacitance (µF)
35
Impedance (Ω max.)
20℃
−10℃
(mArms)
φD×L (mm)
Casing
symbol
̶
̶
̶
̶
̶
̶
̶
̶
̶
5×11.5
̶
̶
555
50
Impedance (Ω max.)
20℃
−10℃
(mArms)
̶
̶
̶
̶
E3
0.65
Impedance (Ω max.)
20℃
−10℃
Rated ripple
current
(mArms)
5×11.5
E3
0.95
1.9
170
F3
0.46
0.92
260
1.3
181
6.3×11.5
47
5×11.5
E3
0.65
1.3
181
6.3×11.5
F3
0.32
0.64
290
6.3×11.5
F3
0.46
0.92
260
100
6.3×11.5
F3
0.32
0.64
290
8×12
G3
0.17
0.34
555
8×12
G3
0.21
0.42
485
615
150
̶
̶
̶
̶
̶
̶
̶
̶
̶
10×12.5
H3
0.19
0.38
220
8×12
G3
0.17
0.34
555
10×12.5
H3
0.12
0.24
760
10×16
H4
0.16
0.32
850
330
10×12.5
H3
0.12
0.24
760
10×16
H4
0.080
0.16
1050
10×20
H5
0.085
0.17
1050
470
10×16
H4
0.080
0.16
1050
10×20
H5
0.062
0.124
1220
12.5×20
Ⅰ5
0.060
0.12
1500
680
10×20
H5
0.062
0.124
1220
12.5×20
Ⅰ5
0.042
0.084
1690
12.5×25
Ⅰ6
0.045
0.090
1832
1000
12.5×20
Ⅰ5
0.042
0.084
1690
12.5×25
Ⅰ6
0.034
0.068
1950
16×25
J6
0.038
0.076
2240
2200
16×25
J6
0.028
0.056
2560
J7
0.025
0.050
3010
̶
̶
̶
̶
̶
3300
16×31.5
J7
0.025
0.050
3010
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
Impedance (Ω max.)
Rated ripple
current
Case
20℃ −10℃
(mArms)
φD×L (mm)
Rated
capacitance (µF)
3.3
16×31.5
63
Rated voltage (V)
Item
̶
Case
φD×L (mm)
Casing
symbol
̶
̶
̶
100
̶
Casing
symbol
Impedance (Ω max.)
20℃
−10℃
̶
5×11.5
E3
1.9
7.6
Rated ripple
current
(mArms)
57
5×11.5
E3
1.2
3.6
120
5×11.5
E3
1.9
7.6
57
10
5×11.5
E3
1.2
3.6
120
6.3×11.5
F3
1.1
4.4
78
22
6.3×11.5
F3
0.55
1.7
148
8×12
G3
0.53
2.1
275
33
6.3×11.5
F3
0.55
1.7
148
10×12.5
H3
0.47
1.9
319
8×12
G3
0.32
0.96
360
10×16
H4
0.32
1.3
424
10×12.5
H3
0.23
0.69
448
12.5×20
Ⅰ5
0.13
0.52
805
1290
4.7
47
100
220
10×20
H5
0.12
0.36
676
16×25
J6
0.081
0.32
330
12.5×20
Ⅰ5
0.075
0.23
979
16×25
J6
0.081
0.32
1290
470
12.5×25
Ⅰ6
0.065
0.20
1180
16×31.5
J7
0.059
0.23
1630
J7
0.042
0.13
1890
̶
̶
̶
̶
1000
16×31.5
̶
(Note) Rated ripple current : 105℃, 100kHz ; Impedance : 100kHz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
RJH
MINIATURE
MINIATUREALUMINUM
ALUMINUMELECTROLYTIC
ELECTROLYTICCAPACITORS
CAPACITORS
GREEN
CAP
105°C Use, High-Reliability, Low Impedance Capacitors
●
®
105˚C
Low
Impedance 5000hours
Anticleaning
solvent
Guarantees 5000 hours at 105℃.
(φ5 to φ6.3 : 2000 hours ; φ8 to φ10 : 3000 hours)
Long life
RJH
RJ3
Marking color : White print on a black sleeve
Specifications
Item
Performance
Category temperature range (℃)
ー55 to +105
Tolerance at rated capacitance (%)
±20
Leakage current (µA)
(max.)
0.01CV + 2 (after 2 minutes) C : Rated capacitance (µF) ; V : Rated voltage (V)
Tangent of loss angle
(tanδ)
(20℃,120Hz)
(20℃)
Rated voltage (V)
6.3
10
16
25
35
50
63
100
tanδ (max.)
0.22
0.19
0.16
0.14
0.12
0.10
0.08
0.07
0.02 is added to every 1000µF increase over 1000µF.
Rated voltage (V)
Characteristics at high
and low temperature
Impedance ratio
(max.)
(20℃,120Hz)
6.3
10
16
25
35
50
63
Z−25℃/Z+20℃
2
2
2
2
2
2
2
100
2
Z−55℃/Z+20℃
3
3
3
3
3
3
3
3
(120Hz)
5000 hours
Test time
Endurance (105℃)
(Applied ripple current)
The initial specified value or less
Leakage current
Within ±20% of initial value
Percentage of capacitance change
200% or less of the initial specified value
Tangent of the loss angle
1000 hours
Test time
The initial specified value or less
Leakage current
Shelf life (105℃)
(φ5 to φ6.3 : 2000 hours)
(φ8 to φ10 : 3000 hours)
Within ±15% of initial value
Percentage of capacitance change
150% or less of the initial specified value
Tangent of the loss angle
Voltage application treatment : According to JIS C5101-4 4.1
Applicable standards
JIS C5101 - 1,- 4 (IEC 60384 - 1,- 4)
Outline Drawing
Unit : mm
φd±0.05 copper plated steel wire (tinned)
Sleeve
F±0.5
φD+0.5/0
Vent (exceptφ5)
L+α max.
15min.
5
min.
Coefficient of Frequency for Rated Ripple Current
Frequency (Hz)
Rated
capacitance (µF)
1 to 4.7
5.6 to 47
56 to 270
330 to 1000
1200 to 15000
α
5
2.0
0.5
1.0
6.3
2.5
0.5
1.0
8
3.5
0.6
1.0
10
5.0
0.6
2.0
12.5
5.0
0. 6
2.0
1k
10k
100k
0.68
0.76
0.85
0.93
0.95
0.78
0.87
0.90
0.98
1.00
1
1
1
1
1
Part numbering system (example : 10V5600µF)
RJH
φD
F
φd
120
0.40
0.50
0.70
0.80
0.90
16
7.5
0.8
2.0
18
7.5
0.8
2.0
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
Series code
̶
10
Rated voltage
symbol
V
562
M
Rated capacitance Capacitance
symbol
tolerance symbol
J7 # ̶
Casing
symbol
Taping(Forming)
symbol
CAT.No.2021/2022E
RJH
®
MINIATURE ALUMINUM ELECTROLYTIC
CAPACITORS
MINIATURE ALUMINUM
ELECTROLYTIC CAPACITORS
RJH
Standard Ratings
Rated voltage (V)
Case
φD×L (mm)
6.3
Item Rated capacitance
Casing
symbol
(µF)
ESR
(Ω)
10
Impedance (Ω max.)
20℃
−10℃
Rated ripple current Rated capacitance
(mArms)
(µF)
ESR
Impedance (Ω max.)
(Ω)
20℃
−10℃
Rated ripple current
(mArms)
5×11.5
E3
100
3.65
0.65
1.46
175
82
3.84
0.65
1.46
175
6.3×11.5
F3
220
1.66
0.31
0.70
290
180
1.75
0.31
0.70
290
8×12
G3
470
0.777
0.17
0.38
488
330
0.956
0.17
0.38
488
8×15
G4
680
0.537
0.13
0.29
617
470
0.671
0.13
0.29
617
8×20
G5
1000
0.365
0.095
0.21
800
680
0.464
0.095
0.21
800
10×12.5
H3
680
0.537
0.10
0.23
625
470
0.671
0.10
0.23
625
10×16
H4
820
0.446
0.080
0.18
825
560
0.563
0.080
0.18
825
10×20
H5
1200
0.305
0.062
0.14
1010
1000
0.316
0.062
0.14
1010
10×25
H6
1500
0.244
0.052
0.12
1190
1200
0.263
0.052
0.12
1190
10×30
H7
2200
0.181
0.044
0.099
1440
1500
0.211
0.044
0.099
1440
12.5×15
Ⅰ4
1200
0.305
0.062
0.14
1010
• 1000
0.316
0.062
0.14
1010
12.5×20
Ⅰ5
2200
0.181
0.042
0.095
1400
1800
0.176
0.042
0.095
1400
12.5×25
Ⅰ6
2700
0.148
0.034
0.076
1690
2200
0.159
0.034
0.076
1690
12.5×30
Ⅰ7
3900
0.111
0.030
0.068
1950
2700
0.130
0.030
0.068
1950
12.5×35
Ⅰ8
4700
0.099
0.024
0.054
2220
3300
0.116
0.024
0.054
2220
12.5×40
Ⅰ9
5600
0.089
0.021
0.047
2390
3900
0.098
0.021
0.047
2390
16×16
J4
•
2700
0.148
0.046
0.10
1310
• 1800
0.176
0.046
0.10
1310
16×20
J5
•
4700
0.099
0.034
0.077
1660
• 3300
0.116
0.034
0.077
1660
16×25
J6
5600
0.089
0.028
0.063
2070
3900
0.098
0.028
0.063
2070
16×31.5
J7
6800
0.079
0.025
0.056
2350
5600
0.080
0.025
0.056
2350
16×35.5
J8
8200
0.073
0.022
0.050
2550
6800
0.071
0.022
0.050
2550
16×40
J9
12000
0.059
0.018
0.041
2970
8200
0.067
0.018
0.041
2970
18×16
K4
•
3300
0.131
0.043
0.097
1460
• 2200
0.159
0.043
0.097
1460
18×20
K5
•
5600
0.089
0.030
0.068
1850
• 3900
0.098
0.030
0.068
1850
18×25
K6
•
6800
0.079
0.027
0.061
2120
• 4700
0.089
0.027
0.061
2120
18×31.5
K7
10000
0.064
0.023
0.052
2410
6800
0.071
0.023
0.052
2410
18×35.5
K8
12000
0.059
0.019
0.043
2680
8200
0.067
0.019
0.043
2680
18×40
K9
15000
0.054
0.017
0.038
3010
10000
0.059
0.017
0.038
3010
•
Rated voltage (V)
Case
φD×L (mm)
16
Item Rated capacitance
Casing
symbol
(µF)
ESR
(Ω)
25
Impedance (Ω max.)
20℃
−10℃
Rated ripple current Rated capacitance
(mArms)
(µF)
ESR
(Ω)
Impedance (Ω max.)
20℃
−10℃
Rated ripple current
(mArms)
5×11.5
E3
56
4.74
0.65
1.46
175
39
5.96
0.65
1.46
175
6.3×11.5
F3
120
2.21
0.31
0.70
290
82
2.83
0.31
0.70
290
8×12
G3
270
0.983
0.17
0.38
488
180
1.29
0.17
0.38
488
8×15
G4
330
0.805
0.13
0.29
617
220
1.06
0.13
0.29
617
8×20
G5
470
0.565
0.095
0.21
800
330
0.704
0.095
0.21
800
10×12.5
H3
330
0.805
0.10
0.23
625
220
1.06
0.10
0.23
625
10×16
H4
390
0.681
0.080
0.18
825
270
0.861
0.080
0.18
825
10×20
H5
680
0.391
0.062
0.14
1010
470
0.495
0.062
0.14
1010
10×25
H6
820
0.324
0.052
0.12
1190
560
0.415
0.052
0.12
1190
10×30
H7
1200
0.222
0.044
0.099
1440
820
0.284
0.044
0.099
1440
12.5×15
Ⅰ4
680
0.391
0.062
0.14
1010
470
0.495
0.062
0.14
1010
12.5×20
Ⅰ5
1200
0.222
0.042
0.095
1400
820
0.284
0.042
0.095
1400
12.5×25
Ⅰ6
1500
0.177
0.034
0.076
1690
1000
0.233
0.034
0.076
1690
12.5×30
Ⅰ7
2200
0.136
0.030
0.068
1950
1500
0.155
0.030
0.068
1950
12.5×35
Ⅰ8
2700
0.111
0.024
0.054
2220
1800
0.130
0.024
0.054
2220
12.5×40
Ⅰ9
3300
0.101
0.021
0.047
2390
2200
0.121
0.021
0.047
2390
16×16
J4
• 1500
0.177
0.046
0.10
1310
•
820
0.284
0.046
0.10
1310
16×20
J5
• 2200
0.136
0.034
0.077
1660
• 1500
0.155
0.034
0.077
1660
16×25
J6
2700
0.111
0.028
0.063
2070
1800
0.130
0.028
0.063
2070
16×31.5
J7
3900
0.086
0.025
0.056
2350
2700
0.099
0.025
0.056
2350
16×35.5
J8
4700
0.078
0.022
0.050
2550
3300
0.091
0.022
0.050
2550
16×40
J9
5600
0.072
0.018
0.041
2970
3900
0.077
0.018
0.041
2970
18×16
K4
• 1500
0.177
0.043
0.097
1460
• 1200
0.194
0.043
0.097
1460
18×20
K5
• 2700
0.111
0.030
0.068
1850
• 1800
0.130
0.030
0.068
1850
18×25
K6
• 3900
0.086
0.027
0.061
2120
• 2700
0.099
0.027
0.061
2120
18×31.5
K7
4700
0.078
0.023
0.052
2410
3300
0.091
0.023
0.052
2410
18×35.5
K8
6800
0.064
0.019
0.043
2680
3900
0.077
0.019
0.043
2680
18×40
K9
8200
0.061
0.017
0.038
3010
4700
0.071
0.017
0.038
3010
•
•
(Note) Rated ripple current : 105℃, 100kHz ; ESR. : 20℃, 120Hz ; Impedance : 100kHz
• : The black circles in the capacitance column denote semi-standard products.
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
RJH
RJH
MINIATURE
MINIATUREALUMINUM
ALUMINUMELECTROLYTIC
ELECTROLYTICCAPACITORS
CAPACITORS
®
Standard Ratings
ESR
(Ω)
̶
̶
̶
̶
̶
7.37
3.56
1.66
1.11
0.905
1.33
1.11
0.604
0.511
0.356
0.604
0.356
0.293
0.200
0.166
0.133
0.356
0.200
0.166
0.111
0.106
0.087
0.293
0.166
0.111
0.106
0.087
0.081
35
Impedance (Ω max.)
20℃
−10℃
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
0.65
1.46
0.31
0.70
0.17
0.38
0.13
0.29
0.095
0.21
0.10
0.23
0.080
0.18
0.062
0.14
0.052
0.12
0.044
0.099
0.062
0.140
0.042
0.095
0.034
0.076
0.030
0.068
0.024
0.054
0.021
0.047
0.046
0.10
0.034
0.077
0.028
0.063
0.025
0.056
0.022
0.050
0.018
0.041
0.043
0.097
0.030
0.068
0.027
0.061
0.023
0.052
0.019
0.043
0.017
0.038
ESR
(Ω)
11.1
4.92
2.82
1.95
1.62
2.37
1.95
1.11
0.885
0.738
0.885
0.604
0.492
0.341
0.283
0.237
0.604
0.341
0.283
0.196
0.162
0.133
0.403
0.237
0.196
0.162
0.133
0.111
63
Impedance (Ω max.)
20℃
−10℃
1.2
3.6
0.55
1.7
0.32
0.96
0.24
0.72
0.17
0.51
0.23
0.69
0.17
0.51
0.12
0.36
0.10
0.30
0.085
0.26
0.11
0.33
0.075
0.23
0.065
0.20
0.055
0.17
0.048
0.14
0.042
0.13
0.080
0.24
0.057
0.17
0.052
0.16
0.042
0.13
0.036
0.11
0.032
0.096
0.065
0.20
0.058
0.17
0.050
0.15
0.042
0.13
0.035
0.11
0.032
0.096
Rated voltage (V)
Case
Casing Item
φD×L (mm)
symbol
E3
5×11.5
E3
5×11.5
E3
5×11.5
E3
5×11.5
E3
5×11.5
E3
5×11.5
F3
6.3×11.5
G3
8×12
G4
8×15
G5
8×20
H3
10×12.5
H4
10×16
H5
10×20
H6
10×25
H7
10×30
Ⅰ4
12.5×15
Ⅰ5
12.5×20
Ⅰ6
12.5×25
Ⅰ7
12.5×30
Ⅰ8
12.5×35
Ⅰ9
12.5×40
J4
16×16
J5
16×20
J6
16×25
J7
16×31.5
J8
16×35.5
J9
16×40
K4
18×16
K5
18×20
K6
18×25
K7
18×31.5
K8
18×35.5
K9
18×40
Rated capacitance
•
•
•
•
•
•
(µF)
̶
̶
̶
̶
̶
27
56
120
180
220
150
180
330
390
560
330
560
680
1000
1200
1500
560
1000
1200
1800
2200
2700
680
1200
1800
2200
2700
3300
Rated voltage (V)
Item
Case
Casing
φD×L (mm)
symbol
E3
5×11.5
F3
6.3×11.5
G3
8×12
G4
8×15
G5
8×20
H3
10×12.5
H4
10×16
H5
10×20
H6
10×25
H7
10×30
Ⅰ4
12.5×15
Ⅰ5
12.5×20
Ⅰ6
12.5×25
Ⅰ7
12.5×30
Ⅰ8
12.5×35
Ⅰ9
12.5×40
J4
16×16
J5
16×20
J6
16×25
J7
16×31.5
J8
16×35.5
J9
16×40
K4
18×16
K5
18×20
K6
18×25
K7
18×31.5
K8
18×35.5
K9
18×40
Rated capacitance
•
•
•
•
•
•
(µF)
12
27
47
68
82
56
68
120
150
180
150
220
270
390
470
560
220
390
470
680
820
1000
330
470
680
820
1000
1200
Rated ripple current Rated capacitance
(mArms)
̶
̶
̶
̶
̶
175
290
488
617
800
625
825
1010
1190
1440
1010
1400
1690
1950
2220
2390
1310
1660
2070
2350
2550
2970
1460
1850
2120
2410
2680
3010
•
•
•
•
•
•
(µF)
1
2.2
3.3
4.7
10
18
39
68
82
120
82
100
180
220
330
180
330
470
560
680
820
330
680
820
1000
1200
1500
470
820
1000
1500
1800
2200
Rated ripple current Rated capacitance
(mArms)
120
148
360
469
682
448
553
676
876
1020
745
979
1180
1310
1470
1590
982
1210
1490
1890
2140
2410
1200
1460
1740
1990
2340
2560
•
•
•
•
•
•
(µF)
5.6
12
22
33
39
27
33
56
68
100
68
100
120
180
220
270
120
180
220
330
390
470
150
270
330
390
560
680
ESR
(Ω)
166
75.4
50.3
35.3
16.6
9.22
4.25
2.44
2.02
1.38
2.02
1.66
0.922
0.754
0.503
0.922
0.503
0.353
0.297
0.244
0.203
0.503
0.244
0.203
0.166
0.139
0.111
0.353
0.203
0.166
0.111
0.074
0.073
ESR
(Ω)
20.7
9.68
5.28
3.52
2.98
4.30
3.52
2.07
1.71
1.16
1.71
1.16
0.968
0.646
0.528
0.431
0.968
0.646
0.528
0.352
0.298
0.248
0.775
0.431
0.352
0.298
0.208
0.171
50
Impedance (Ω max.)
20℃
−10℃
3.5
7.0
3.0
6.0
2.6
5.2
2.2
4.4
1.4
2.8
0.95
1.9
0.43
0.86
0.20
0.40
0.18
0.36
0.13
0.26
0.18
0.36
0.15
0.30
0.085
0.17
0.075
0.15
0.055
0.11
0.095
0.19
0.060
0.12
0.044
0.088
0.040
0.080
0.036
0.072
0.034
0.068
0.065
0.13
0.045
0.090
0.038
0.076
0.032
0.064
0.028
0.056
0.026
0.052
0.048
0.096
0.036
0.072
0.032
0.064
0.026
0.052
0.025
0.050
0.024
0.048
100
Impedance (Ω max.)
20℃
−10℃
1.9
7.6
1.1
4.4
0.53
2.1
0.35
1.4
0.27
1.1
0.47
1.9
0.32
1.3
0.25
1.0
0.18
0.72
0.15
0.60
0.20
0.80
0.13
0.52
0.11
0.44
0.090
0.36
0.075
0.30
0.060
0.24
0.13
0.52
0.11
0.44
0.081
0.32
0.059
0.23
0.052
0.21
0.045
0.18
0.12
0.48
0.085
0.34
0.071
0.28
0.058
0.23
0.054
0.22
0.041
0.16
Rated ripple current
(mArms)
36
54
63
75
110
120
148
360
460
670
443
553
676
876
1010
745
979
1180
1310
1470
1590
982
1210
1490
1890
2140
2410
1180
1450
1720
1970
2310
2530
Rated ripple current
(mArms)
57
78
275
360
490
319
424
499
634
739
613
805
857
1120
1240
1330
706
916
1290
1630
1750
1920
871
1170
1500
1630
1920
2100
(Note) Rated ripple current : 105°
C, 100kHz ; ESR. : 20°
C, 120Hz ; Impedance : 100kHz
• : The black circles in the capacitance column denote semi-standard products.
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
RJF
®
MINIATURE ALUMINUM ELECTROLYTIC
CAPACITORS
MINIATURE ALUMINUM
ELECTROLYTIC CAPACITORS
105˚C Use, Miniature, High-Reliability, Extra Low Impedance Capacitors
●
GREEN
CAP
RJF
Low
105˚C
Impedance 10000hours
Anticleaning
solvent
Higher ripple current and Lower impedance than RJB series.
Low impedance
RJF
RJB
Marking color : White print on a black sleeve
Specifications
Item
Performance
Category temperature range (℃)
−40 to +105
Tolerance at rated capacitance (%)
±20
Leakage current (µA)
(max.)
(20℃,120Hz)
0.01CV or 3 whichever is larger (after 2 minutes) C : Rated capacitance (µF) ; V : Rated voltage (V)
Tangent of loss angle
(tanδ)
(20℃)
Rated voltage (V)
6.3
10
16
25
35
50
63
80
100
tanδ (max.)
0.22
0.19
0.16
0.14
0.12
0.10
0.09
0.09
0.08
0.02 is added to every 1000µF increase over 1000µF.
Rated voltage (V)
Characteristics at high
and low temperature
Impedance ratio
(max.)
(20℃,120Hz)
6.3
10
16
25
35
50
63
80
100
Z−25℃/Z+20℃
2
2
2
2
2
2
2
2
2
Z−40℃/Z+20℃
3
3
3
3
3
3
3
3
3
(120Hz)
5L & 7L
:
φ5 & φ6.3
:
φ8 & φ10
:
φ12.5 to φ18 :
Test time
Endurance (105℃)
(Applied ripple current)
hours
hours (63 to 100WV:5000 hours)
hours (63 to 100WV:7000 hours)
hours (63 to 100WV:10000 hours)
The initial specified value or less
Leakage current
Within ±25% of initial value
Percentage of capacitance change
200% or less of the initial specified value
Tangent of the loss angle
1000 hours
Test time
The initial specified value or less
Leakage current
Shelf life (105℃)
1000
2000
3000
5000
Within ±25% of initial value
Percentage of capacitance change
200% or less of the initial specified value
Tangent of the loss angle
Voltage application treatment : According to JIS C5101-4 4.1
JIS C5101 - 1,
- 4 (IEC 60384 - 1,
- 4)
Applicable standards
Outline Drawing
φd±0.05 copper plated steel wire (tinned)
Sleeve
F±0.5
φD+0.5/0
Vent (except φ5, 5L&7L)
Unit : mm
L+αmax.
15min.
5
min.
Coefficient of Frequency for Rated Ripple Current
Frequency (Hz)
Rated
capacitance (µF)
5.6 to 180
220 to 390
470 to 1800
2200 to 3900
4700 to 6800
5L, 7L
φD
F
φd
α
4
1.5
0.45
1.0
6.3
2.5
0.5
1.0
8
3.5
0.6
1.0
10
5.0
0.6
2.0
5
2.0
0.45
1.0
6.3
2.5
0.45
1.0
8
3.5
0.45
1.0
12.5
5.0
0.6
2.0
1k
10k
100k
0.75
0.85
0.87
0.90
0.95
0.90
0.94
0.95
0.95
0.98
1
1
1
1
1
Part numbering system (example : 10V1000µF)
RJF
11.5L or more
φD
5
F
2.0
φd
0.5
α
1.0
120
0.40
0.50
0.60
0.75
0.85
16
7.5
0.8
2.0
18
7.5
0.8
2.0
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
Series code
̶
10
Rated voltage
symbol
V
102
M
H4 # ̶
Rated capacitance
Capacitance
Casing
symbol
tolerance symbol symbol
Taping(Forming)
symbol
CAT.No.2021/2022E
RJF
RJF
MINIATURE
ALUMINUM
ELECTROLYTIC
CAPACITORS
MINIATURE
ALUMINUM
ELECTROLYTIC
CAPACITORS
®
Standard Ratings
6.3
Rated voltage (V)
Item
Case
10
Impedance (Ω max.)
Rated ripple
current
Case
16
Impedance (Ω max.)
Rated ripple
current
Case
Impedance (Ω max.)
Rated ripple
current
φD×L (mm)
Casing
symbol
(mArms)
φD×L (mm)
Casing
symbol
20℃
−10℃
(mArms)
φD×L (mm)
Casing
symbol
20℃
−10℃
18
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
4×7
D1
0.92
2.8
130
27
̶
̶
̶
̶
̶
4×7
D1
0.89
2.7
6.3×5
F0
0.30
0.95
210
33
̶
̶
̶
̶
̶
̶
̶
̶
̶
5×7
E1
0.45
1.4
210
6.3×5
F0
0.30
0.95
210
39
4×7
D1
0.85
2.6
̶
̶
̶
̶
̶
̶
̶
̶
47
̶
̶
̶
̶
̶
6.3×5
F0
0.29
0.93
210
̶
̶
̶
̶
56
̶
̶
̶
̶
̶
5×7
E1
0.44
1.4
210
E3
0.22
0.80
345
68
5×7
E1
0.43
1.3
210
300
100
6.3×5
F0
0.28
0.91
210
Rated
capacitance (µF)
̶
20℃ −10℃
̶
̶
̶
E3
0.22
0.80
6.3×7
F1
0.23
0.69
180
̶
̶
̶
̶
220
8×7
G1
0.15
0.45
380
F3
0.094
0.35
540
120
5×11.5
150
6.3×11.5
330
̶
470
8×12
560
̶
̶
̶
G3
0.056
0.19
̶
130
̶
̶
5×11.5
6.3×7
345
̶
300
̶
̶
8×7
6.3×11.5
̶
8×12
̶
945
10×12.5
̶
̶
̶
E3
0.22
0.8
F1
0.23
0.69
̶
̶
̶
130
̶
̶
5×11.5
̶
̶
F1
0.24
0.72
̶
̶
̶
̶
8×7
G1
0.15
0.45
380
6.3×11.5
F3
0.094
0.35
540
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
345
300
6.3×7
(mArms)
̶
G1
0.15
0.45
380
̶
F3
0.094
0.35
540
̶
̶
̶
̶
̶
8×12
G3
G3
0.056
0.19
8×15
G4
0.045 0.15
1250
̶
̶
̶
̶
10×16
H4
0.028 0.10
1760
̶
945
0.056 0.19
̶
945
680
̶
̶
̶
̶
̶
H3
0.039
0.14
1330
̶
̶
̶
̶
820
8×15
G4
0.045
0.15
1250
̶
̶
̶
̶
̶
̶
̶
̶
̶
1000
10×12.5
H3
0.039
0.14
1330
10×16
H4
0.028
0.10
1760
10×20
H5
0.020 0.060
1960
̶
̶
1200
10×16
H4
0.028
0.10
1760
10×20
H5
0.020
0.060
1960
10×25
H6
0.018 0.054
2250
1500
10×20
H5
0.020
0.060
1960
10×25
H6
0.018
0.054
2250
12.5×20
Ⅰ5
0.017 0.043
2480
2200
10×25
H6
0.018
0.054
2250
12.5×20
Ⅰ5
0.017
0.043
2480
12.5×25
Ⅰ6
0.015 0.038
2900
2700
̶
̶
̶
̶
̶
̶
̶
̶
̶
16×20
J5
0.015 0.038
3250
̶
3300
12.5×20
Ⅰ5
0.017
0.043
2480
12.5×25
Ⅰ6
0.015
0.038
2900
16×25
J6
0.013 0.035
3630
3900
12.5×25
Ⅰ6
0.015
0.038
2900
16×20
J5
0.015
0.038
3250
16×25
J6
0.013 0.035
3630
4700
12.5×30
Ⅰ7
0.013
0.033
3450
16×25
J6
0.013
0.035
3630
̶
̶
̶
̶
̶
5600
16×20
J5
0.015
0.038
3570
16×25
J6
0.013
0.035
3630
̶
̶
̶
̶
̶
6800
16×25
J6
0.013
0.035
3630
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
Case
Rated ripple
current
Case
Case
(mArms)
φD×L (mm)
Casing
symbol
Rated ripple
current
φD×L (mm)
Casing
symbol
(mArms)
φD×L (mm)
Casing
symbol
̶
̶
̶
̶
̶
̶
̶
4×7
D1
1.0
3.0
130
5×5
E0
0.63
1.5
4×7
D1
0.96
2.9
1.5
210
̶
̶
̶
5×7
E1
0.47
6.3×5
F0
0.32
̶
̶
25
Rated voltage (V)
Item
Rated
capacitance (µF)
5.6
35
Impedance (Ω max.)
20℃ −10℃
̶
̶
10
5×5
E0
0.61
1.5
130
15
4×7
D1
0.94
2.9
130
18
̶
̶
̶
̶
̶
22
6.3×5
F0
0.31
0.97
210
27
5×7
E1
0.46
1.4
210
33
̶
̶
̶
̶
̶
39
̶
̶
̶
̶
̶
E3
0.22
0.80
345
6.3×7
F1
0.24
0.72
300
8×7
G1
0.15
0.45
380
F3
0.094
0.35
540
47
56
100
5×11.5
6.3×11.5
120
̶
̶
̶
̶
̶
150
̶
̶
̶
̶
̶
180
̶
̶
̶
̶
̶
220
270
8×12
̶
G3
̶
0.056 0.19
̶
̶
945
̶
̶
5×11.5
50
Impedance (Ω max.)
20℃ −10℃
̶
130
Impedance (Ω max.)
20℃ −10℃
Rated ripple
current
(mArms)
5×7
E1
0.50
̶
̶
̶
̶
̶
̶
1.5
210
̶
̶
̶
̶
̶
1.0
210
̶
̶
130
̶
6.3×7
F1
0.26
0.78
5×11.5
E3
0.34
1.18
̶
̶
̶
̶
300
238
̶
E3
0.22
0.80
345
8×7
G1
0.17
F1
0.25
0.75
300
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
8×7
6.3×11.5
F3
0.14
0.50
385
6.3×7
̶
0.51
380
G1
0.16
0.48
380
6.3×11.5
F3
0.094
0.35
540
̶
̶
̶
̶
̶
8×12
G3
0.074
0.22
724
̶
̶
̶
̶
̶
8×15
G4
0.061
0.18
950
10×12.5
H3
0.061
0.18
979
8×20
G5
0.046
0.14
1190
8×12
̶
G3
̶
0.056 0.19
̶
̶
945
̶
10×12.5
H3
0.039 0.14
1330
10×16
H4
0.042
0.12
1370
8×20
G5
0.029 0.11
1500
10×20
H5
0.030
0.090
1580
330
10×12.5
H3
0.039 0.14
1330
10×16
H4
0.028 0.10
1760
10×25
H6
0.028
0.085
1870
470
10×16
H4
0.028 0.10
1760
10×20
H5
0.020 0.060
1960
12.5×20
Ⅰ5
0.027
0.068
2050
560
̶
̶
̶
10×25
H6
0.018 0.054
2250
12.5×25
Ⅰ6
0.023
0.059
2410
680
10×20
H5
0.020 0.060
1960
12.5×20
Ⅰ5
0.017 0.043
2480
16×20
J5
0.023
0.059
2730
820
10×25
H6
0.018 0.054
2250
̶
16×20
J5
0.023
0.059
2730
1000
Ⅰ5
̶
0.017 0.043
̶
̶
2480
̶
12.5×25
Ⅰ6
0.015 0.038
2900
1200
12.5×20
̶
16×20
J5
0.015 0.038
3250
16×25
̶
J6
̶
0.021
̶
0.056
̶
3010
̶
1500
12.5×25
Ⅰ6
0.015 0.038
2900
16×25
J6
0.013 0.035
3630
̶
̶
̶
̶
̶
1800
16×20
J5
0.015 0.038
3250
16×25
J6
0.013 0.035
3630
̶
̶
̶
̶
̶
2200
16×25
J6
0.013 0.035
3630
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
2700
16×25
J6
0.013 0.035
3630
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
(Note) Rated ripple current : 105℃, 100kHz ; Impedance : 100kHz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
RJF
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS
Standard Ratings
Rated voltage (V)
Item
Rated
capacitance (µF)
6.8
15
27
33
63
80
100
Case φDxL
(mm)
Casing
symbol
20℃
-10℃
Rated
ripple
current
(mArms)
20℃
-10℃
Rated
ripple
current
(mArms)
20℃
-10℃
-
-
-
-
-
—
-
-
-
-
5 × 11.5
E3
1.4
5.6
125
E3
0.88
165
—
-
-
-
-
6.3 × 11.5
F3
0.57
2.3
205
-
-
-
—
-
-
-
-
8 × 12
G3
0.36
1.4
F3
0.35
265
—
-
-
-
-
-
-
5 × 11.5
-
6.3 × 11.5
Impedance
( Ωmax.)
3.5
-
1.4
Case φDxL
(mm)
Casing
symbol
Impedance
( Ωmax.)
Case φDxL
(mm)
—
Casing
symbol
Impedance
( Ωmax.)
-
Rated
ripple
current
(mArms)
335
-
39
-
-
-
-
-
—
-
-
-
-
8 × 15
G4
0.25
1.0
450
47
-
-
-
-
-
—
-
-
-
-
10 × 12.5
H3
0.17
0.66
480
G3
0.22
0.88
500
—
-
-
-
-
8 × 20
G5
0.19
0.76
565
-
-
-
H3
0.17
0.66
480
10 × 16
H4
0.11
0.47
600
H3
0.11
0.44
-
-
-
-
-
10 × 20
H5
0.084
0.34
800
-
-
-
10 × 16
H4
0.11
0.47
600
12.5 × 15
I4
0.11
0.34
750
8 × 20
G5
0.12
0.48
820
10 × 16
H4
0.076
0.31
950
10 × 20
H5
0.084
0.34
800
10 × 25
H6
0.069
0.28
900
900
12.5 × 20
1100
56
68
82
100
120
8 × 12
-
10 × 12.5
-
-
10 × 12.5
690
-
150
-
-
-
-
-
10 × 25
H6
0.069
0.28
180
10 × 20
H5
0.056
0.23
1150
-
-
-
-
-
220
10 × 25
H6
0.046
0.19
1350
12.5 × 20
I5
0.062
0.18
1100
270
12.5 × 20
I5
0.041
0.13
1500
-
-
-
-
12.5 × 25
I6
0.047
0.14
330
390
470
560
-
-
-
-
-
16 × 20
J5
0.048
0.15
1350
-
12.5 × 30
I7
0.042
0.13
1500
1250
12.5 × 35
I8
0.036
0.11
1650
16 × 25
J6
0.038
0.12
1700
16 × 20
J5
0.048
0.15
1350
18 × 20
K5
0.045
0.14
1500
12.5 × 40
I9
0.032
0.095
1800
16 × 31.5
J7
0.032
0.095
1850
18 × 25
K6
0.036
0.11
1750
16 × 35.5
J8
0.029
0.086
2000
18 × 31.5
K7
0.030
0.090
1900
16 × 40
J9
0.027
0.081
2480
18 × 35.5
K8
0.027
0.081
2200
18 × 40
K9
0.026
0.077
2700
0.031
0.093
1900
12.5 × 30
I7
0.042
0.13
1500
12.5 × 30
I7
0.028
0.084
2300
12.5 × 35
I8
0.036
0.11
1650
16 × 25
J6
0.038
0.12
1700
18 × 20
K5
0.045
0.14
1500
16 × 20
J5
0.032
0.096
2000
0.070
2500
12.5 × 40
I9
0.021
0.063
2800
16 × 25
J6
0.025
0.075
2600
18 × 20
K5
0.030
0.090
2500
16 × 31.5
J7
0.021
0.063
18 × 25
K6
0.024
16 × 35.5
J8
16 × 40
J9
18 × 31.5
1500
1800
1200
-
I6
0.024
1000
0.18
-
12.5 × 25
I8
820
0.062
-
-
12.5 × 35
680
I5
—
-
-
-
-
-
16 × 31.5
J7
0.032
0.095
1850
2850
16 × 35.5
J8
0.029
0.086
2000
0.072
2800
18 × 31.5
K7
0.030
0.090
1900
0.019
0.057
2900
-
-
-
-
-
—
-
-
-
-
0.018
0.054
3400
K7
0.020
0.060
3300
18 × 40
K9
0.026
0.077
2700
—
-
-
-
-
18 × 35.5
K8
0.018
0.054
3400
—
-
-
-
-
—
-
-
-
-
18 × 40
K9
0.017
0.051
3500
—
-
-
-
-
—
-
-
-
-
(Note) Rated ripple current : 105℃ , 100kHz ; Impedance : 100kHz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
RJM
®
MINIATURE
MINIATURE ALUMINUM
ALUMINUM ELECTROLYTIC
ELECTROLYTICCAPACITORS
CAPACITORS
105°C Use, Miniature, Long Life, Extra Low Impedance Capacitors
●
●
GREEN
CAP
105˚C
Low
Impedance 10000hours
Anticleaning
solvent
Long life than RJF series.
Guarantees 10000 hours at 105℃.
(φ5, φ6.3 : 6000 hours, φ8 : 8000 hours)
Long life
RJM
RJF
Marking color : White print on a black sleeve
Specifications
Item
Performance
Category temperature range (℃)
−40 to +105
Tolerance at rated capacitance (%)
±20
Leakage current (µA)
(max.)
0.01CV or 3 whichever is larger (after 2 minutes) C : Rated capacitance (µF), V : Rated voltage (V)
Tangent of loss angle
(tanδ)
(20℃,120Hz)
(20℃)
Rated voltage (V)
6.3
10
16
25
35
50
tanδ (max.)
0.22
0.19
0.16
0.14
0.12
0.10
0.02 is added to every 1000µF increase over 1000µF.
Rated voltage (V)
Characteristics at high
and low temperature
Impedance ratio (max.)
(20℃,120Hz)
6.3
10
16
25
35
50
Z−25℃/Z+20℃
2
2
2
2
2
2
Z−40℃/Z+20℃
3
3
3
3
3
3
(120Hz)
φ5 & φ6.3 : 6000 hours
φ8
: 8000 hours
φ10 or more : 10000 hours
Test time
Endurance (105℃)
(Applied ripple current)
The initial specified value or less
Leakage current
Within ±25% of initial value (φ6.3 or less : ±30%)
Percentage of capacitance change
200% or less of the initial specified value
Tangent of the loss angle
1000 hours
Test time
The initial specified value or less
Leakage current
Shelf life (105℃)
Within ±25% of initial value (φ6.3 or less : ±30%)
Percentage of capacitance change
200% or less of the initial specified value
Tangent of the loss angle
Voltage application treatment : According to JIS C5101-4 4.1
JIS C5101 - 1,- 4 (IEC 60384 - 1,- 4)
Applicable standards
Outline Drawing
Unit : mm
Coefficient of Frequency for Rated Ripple Current
Frequency (Hz)
Vent (except φ5)
φd±0.05 copper plated steel wire (tinned)
F±0.5
φD+0.5/0
Sleeve
L+α max.
15min.
5
min.
Rated
capacitance (µF)
27 to 33
39 to 270
330 to 680
820 to 1800
2200 to 8200
5
2.0
0.5
1.0
6.3
2.5
0.5
1.0
8
3.5
0.6
1.0
10
5.0
0.6
2.0
12.5
5.0
0.6
2.0
1k
10k
100k
0.70
0.73
0.77
0.80
0.85
0.90
0.92
0.94
0.96
0.98
1
1
1
1
1
Part numbering system (example : 10V1000µF)
RJM
φD
F
φd
α
120
0.42
0.50
0.55
0.60
0.70
16
7.5
0.8
2.0
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
Series code
̶
10
Rated voltage
symbol
V
102
M
G4 # ̶
Rated capacitance
Capacitance
Casing
symbol
tolerance symbol symbol
Taping(Forming)
symbol
CAT.No.2021/2022E
RJM
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS
Standard Ratings
Rated voltage(V)
Item
6.3
Case
10
Impedance
( Ω max.)
Rated ripple
current
Case
-10℃
16
Impedance
( Ω max.)
Case
-10℃
(mArms)
φDxL (mm)
—
5×11.5
E3
0.22
0.80
345
345
5×11.5
E3
0.22
0.80
345
φDxL (mm)
(mArms)
φDxL (mm)
Casing
symbol
82
—
—
—
—
—
—
—
—
—
100
—
—
—
—
—
E3
0.22
0.80
Rated
capacitance
(µF)
120
150
180
220
270
—
5×11.5
—
5×11.5
—
—
—
E3
0.22
0.80
—
—
—
E3
0.22
0.80
20℃
-10℃
Rated ripple
current
(mArms)
—
5×11.5
E3
0.22
0.80
345
—
—
—
—
—
345
5×11.5
E3
0.22
0.80
345
—
—
—
—
—
—
345
—
6.3×11.5
—
—
F3
0.094
—
0.35
—
6.3×11.5
F3
0.094
0.35
540
540
6.3×11.5
F3
0.094
0.35
540
—
—
—
6.3×11.5
F3
0.094
0.35
540
—
—
—
—
—
6.3×11.5
F3
0.094
0.35
540
6.3×11.5
F3
0.094
0.35
540
—
—
—
—
—
470
6.3×11.5
F3
0.094
0.35
540
—
—
820
1000
—
8×12
—
0.056
—
0.19
—
—
945
—
—
8×15
G4
0.045
0.15
1250
10×12.5
H3
0.039
0.14
1560
1500
8×20
G5
0.029
0.11
1500
1800
10×16
H4
0.028
0.10
2200
10×20
H5
0.020
0.060
2700
10×25
H6
0.017
3300
—
—
1200
—
—
G3
—
5×11.5
20℃
Casing
symbol
330
680
—
20℃
Impedance
( Ω max.)
Rated ripple
current
Casing
symbol
—
G4
0.045
0.15
1250
8×20
G5
0.029
0.11
1500
10×12.5
H3
0.039
0.14
1560
10×16
H4
0.028
0.10
2000
—
—
—
—
—
—
—
—
10×20
H5
0.020
0.060
2500
2900
—
—
10×20
H5
0.020
0.060
2500
10×25
H6
0.017
0.051
2500
10×25
H6
0.017
0.051
2900
12.5×20
Ⅰ5
0.017
0.043
2600
0.051
2900
—
—
—
—
—
12.5×25
Ⅰ6
0.015
0.038
3200
—
—
—
12.5×20
Ⅰ5
0.017
0.043
2600
12.5×30
Ⅰ7
0.013
0.033
3795
16×20
J5
0.015
0.038
3575
12.5×25
Ⅰ6
0.015
0.038
3200
12.5×35
Ⅰ8
0.012
0.031
4120
12.5×30
Ⅰ7
0.013
0.033
3795
16×20
J5
0.015
0.038
3575
16×25
J6
0.013
0.035
3810
12.5×35
Ⅰ8
0.012
0.031
4120
—
—
—
—
—
16×25
J6
0.013
0.035
3810
—
—
—
—
—
—
—
—
—
—
—
—
—
Rated ripple
current
Case
φDxL (mm)
Casing
symbol
3200
5600
12.5×30
Ⅰ7
0.013
0.033
3795
12.5×35
Ⅰ8
0.012
0.031
4120
16×20
J5
0.015
0.038
3575
16×25
J6
0.013
0.035
3810
—
—
Case
Rated ripple
current
Case
φDxL (mm)
Casing
symbol
20℃
-10℃
(mArms)
φDxL (mm)
Casing
symbol
20℃
-10℃
(mArms)
—
—
—
—
—
—
—
—
—
—
E3
0.22
0.80
25
—
—
2000
0.038
5×11.5
1560
—
2000
0.015
47
0.14
—
—
1500
Ⅰ6
56
0.039
—
8×15
—
0.10
12.5×25
5×11.5
H3
—
0.11
4700
39
10×12.5
0.056
0.028
2600
27
945
1250
0.029
0.043
Rated
capacitance
(µF)
0.19
0.15
H4
0.017
Item
0.056
0.045
G5
Ⅰ5
Rated voltage(V)
G3
G4
—
—
945
8×12
8×15
G3
—
0.19
—
8×20
12.5×20
8200
8×12
—
10×16
3900
6800
—
35
Impedance
( Ω max.)
—
—
—
E3
0.22
0.80
50
Impedance
( Ω max.)
345
5×11.5
E3
0.22
0.80
345
—
5×11.5
E3
0.22
0.80
345
—
—
—
345
—
-10℃
(mArms)
5×11.5
E3
0.34
1.18
238
6.3×11.5
F3
0.14
0.50
385
—
6.3×11.5
—
—
—
F3
0.14
0.50
—
385
68
5×11.5
E3
0.22
0.80
345
—
—
—
—
—
—
—
—
5×11.5
E3
0.22
0.80
345
6.3×11.5
F3
0.094
0.35
540
—
—
—
—
—
6.3×11.5
F3
0.094
0.35
540
8×12
G3
0.074
0.22
724
—
—
—
8×15
G4
0.061
0.18
950
100
6.3×11.5
F3
0.094
0.35
540
6.3×11.5
F3
0.094
0.35
540
150
6.3×11.5
0.35
—
—
20℃
Rated ripple
current
82
120
—
—
Impedance
( Ω max.)
—
F3
0.094
540
—
—
—
—
—
10×12.5
H3
0.061
0.18
1250
180
—
—
—
—
—
—
—
—
—
—
8×20
G5
0.046
0.14
1190
220
—
—
—
—
—
8×12
G3
0.056
0.19
945
10×16
H4
0.042
0.12
1650
270
—
—
—
—
—
8×15
G4
0.045
0.15
1250
10×20
H5
0.030
0.090
2060
10×12.5
H3
0.039
0.14
1560
10×25
H6
0.028
0.084
2420
—
—
—
—
—
12.5×20
Ⅰ5
0.027
0.068
2300
330
8×12
G3
0.056
0.19
945
390
8×15
G4
0.045
0.15
1250
8×20
G5
0.029
0.11
1500
470
10×12.5
H3
0.039
0.14
1560
10×16
H4
0.028
0.10
2000
560
8×20
G5
0.029
0.11
1500
10×20
H5
0.020
0.060
2500
12.5×25
Ⅰ6
0.023
0.059
2800
680
10×16
H4
0.028
0.10
2000
10×25
H6
0.017
0.051
2900
12.5×30
Ⅰ7
0.021
0.052
3500
12.5×35
Ⅰ8
0.019
0.051
3810
16×20
J5
0.023
0.059
3070
820
10×20
H5
0.020
0.060
2500
—
—
—
—
—
1000
10×25
H6
0.017
0.051
2900
12.5×20
Ⅰ5
0.017
0.043
2600
16×25
J6
0.021
0.056
3270
1200
—
—
—
—
—
12.5×25
Ⅰ6
0.015
0.038
3200
—
—
—
—
—
12.5×30
Ⅰ7
0.013
0.033
3795
1500
12.5×20
Ⅰ5
0.017
0.043
2600
1800
12.5×25
Ⅰ6
0.015
0.038
3200
12.5×30
Ⅰ7
0.013
0.033
3795
16×20
J5
0.015
0.038
3575
2700
12.5×35
Ⅰ8
0.012
0.031
4120
—
—
—
—
—
—
—
—
—
—
3300
16×25
J6
0.013
0.035
3810
—
—
—
—
—
—
—
—
—
—
2200
16×20
J5
0.015
0.038
3575
—
—
—
—
—
12.5×35
Ⅰ8
0.012
0.031
4120
—
—
—
—
—
16×25
J6
0.013
0.035
3810
—
—
—
—
—
(Note) Rated ripple current : 105℃ , 100kHz ; Impedance : 100kHz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
RJD
®
MINIATURE
ALUMINUM
ELECTROLYTIC
CAPACITORS
MINIATURE
ALUMINUM
ELECTROLYTIC
CAPACITORS
GREEN
CAP
105°C Use, miniature, High-Reliability, Low ESR Capacitors
●
●
Anticleaning
solvent
105˚C
Low
ESR
8000hours
Smaller and higher ripple current than RJB series.
Guarantees 8000 hours at 105℃.
(φ5 to 6.3 : 2000 hours ; φ8: 3000 hours; φ10: 5000 hours)
Miniaturized
Low ESR
RJD
RJB
Marking color : White print on a black sleeve
Specifications
Item
Performance
ー55 to +105
±20
Category temperature range (℃)
Tolerance at rated capacitance (%)
Leakage current (µA)
(max.)
(20℃,120Hz)
0.01CV or 3 whichever is larger (after 2 minutes) C : Rated capacitance (µF), V : Rated voltage (V)
Rated voltage (V)
tanδ (max.)
6.3
0.22
0.02 is added to every 1000µF increase over 1000µF.
Tangent of loss angle
(tanδ)
Rated voltage (V)
Characteristics at high
Impedance ratio (max.)
10
0.19
16
0.16
25
0.14
35
0.12
50
0.10
(20℃)
63
0.10
80
0.08
100
0.08
(20℃,120Hz)
6.3
10
16
25
35
50
63
80
100
3
3
3
3
3
3
3
3
3
Zー55℃/Z+20℃
and low temperature
(120Hz)
φ5 & 6.3
φ8
φ10
φ12.5 to φ20
Test time
Endurance (105℃)
Leakage current
Percentage of capacitance change
Tangent of the loss angle
(Applied ripple current)
:
:
:
:
2000
3000
5000
8000
hours
hours
hours
hours
The initial specified value or less
Within ±20% of initial value
200% or less of the initial specified value
Shelf life (105℃)
Test time : 1000hours ; other items are same as the endurance. Voltage application treatment : According to JIS C5101-4 4.1
Applicable standards
JIS C5101 - 1,
- 4 (IEC 60384 - 1,
- 4)
Outline Drawing
Sleeve
φd±0.05 copper plated steel wire (tinned)
F±0.5
φD+0.5/0
Vent (except φ5)
Unit : mm
L+α max.
15min.
Coefficient of Frequency for Rated Ripple Current
Frequency (Hz)
Rated
Capacitance (µF)
56 or less
68 to 330
390 to 1000
1200 to 18000
5
2.0
0.5
1.0
6.3
2.5
0.5
1.0
8
3.5
0.6
1.0
10
5.0
0.6
2.0
12.5
5.0
0.6
2.0
RJD
16
7.5
0.8
2.0
120
300
1k
10k・100k
0.20
0.55
0.70
0.80
0.30
0.65
0.75
0.85
0.50
0.75
0.80
0.90
0.80
0.85
0.90
0.95
1
1
1
1
Part numbering system (example : 6.3V10000µF)
5
min.
Series code
φD
F
φd
α
50・60
18
7.5
0.8
2.0
20
10.0
1.0
2.0
̶
6
Rated voltage
symbol
V
103
M
Rated capacitance
Capacitance
symbol
tolerance symbol
J7
Casing
symbol
#̶
Taping(Forming)
symbol
If it is whisker preventive structure, should change“#”into“G”
.
(Note) Whisker preventive structure is possible for φ8 or more.
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
RJD
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS
Standard Ratings
Rated voltage(V)
Item
6.3
Case
10
ESR(Ω max.)
Rated ripple
current
Case
16
ESR(Ω max.)
Rated ripple
current
Case
φD × L (mm)
Rated ripple
current
φD × L (mm)
20℃
-10℃
(mArms)
φD × L (mm)
Casing
symbol
20℃
-10℃
(mArms)
20℃
-10℃
22
—
—
—
—
—
—
—
—
—
—
5 × 11.5
E3
0.50
1.0
182
33
—
—
—
—
—
—
—
—
—
—
5 × 11.5
E3
0.50
1.0
182
47
—
—
—
—
—
—
—
—
—
—
5 × 11.5
E3
0.50
1.0
182
82
—
—
—
—
—
—
—
—
—
—
5 × 11.5
E3
0.50
1.0
182
100
—
—
—
—
—
E3
0.50
182
6.3 × 11.5
F3
0.25
0.50
295
—
295
150
E3
0.50
—
—
—
6.3 × 11.5
F3
0.25
0.50
—
—
—
—
—
6.3 × 11.5
F3
0.25
0.50
295
8 × 12
G3
0.117
0.234
567
220
—
—
—
—
—
6.3 × 11.5
F3
0.25
0.50
295
8 × 12
G3
0.117
0.234
567
F3
0.25
0.50
8 × 12
G3
0.117
0.234
567
8 × 12
G3
0.117
0.234
567
—
—
—
—
—
—
—
8 × 12
G3
0.117
0.234
567
733
330
6.3 × 11.5
—
1.0
182
295
—
—
1.0
(mArms)
180
390
5 × 11.5
5 × 11.5
Casing
symbol
ESR(Ω max.)
Casing
symbol
Rated
capacitance
(µF)
—
470
8 × 12
G3
0.117
0.234
567
8 × 12
G3
0.117
0.234
567
560
8 × 12
G3
0.117
0.234
567
8 × 12
G3
0.117
0.234
567
680
8 × 12
G3
0.117
0.234
567
—
—
—
G4
0.085
0.170
820
—
8 × 15
—
G4
—
0.085
—
0.170
—
733
1000
1200
1500
1800
10 × 12.5
H3
0.090
0.180
764
10 × 12.5
H3
0.090
0.180
764
—
8 × 15
3900
6800
8200
10000
0.170
0.180
764
8 × 20
G5
0.065
0.130
996
733
8 × 15
G4
0.085
0.170
H3
0.090
0.180
764
733
8 × 20
G5
0.065
0.130
996
10 × 16
H4
0.068
0.136
1060
10 × 16
H4
0.068
0.136
1060
10 × 12.5
H3
0.090
0.180
764
8 × 20
G5
0.065
0.130
996
10 × 12.5
H3
0.090
0.180
764
10 × 16
H4
0.068
0.136
1060
8 × 20
G5
0.065
0.130
996
10 × 20
H5
0.052
0.104
1230
10 × 20
H5
0.052
0.104
1230
H4
0.068
0.136
1060
10 × 16
H4
0.068
0.136
1060
10 × 25
H6
0.045
0.090
1450
8 × 20
G5
0.065
0.130
996
10 × 20
H5
0.052
0.104
1230
10 × 25
H6
0.045
0.090
1450
10 × 16
H4
0.068
0.136
1060
12.5 × 15
Ⅰ4
0.062
0.124
1210
10 × 30
H7
0.035
0.070
1830
10 × 20
H5
0.052
0.104
1230
10 × 25
H6
0.045
0.090
1450
—
—
—
—
—
10 × 25
H6
0.045
0.090
1450
12.5 × 15
Ⅰ4
0.062
0.124
1210
10 × 20
H5
0.052
0.104
1230
H6
0.045
0.090
1450
10 × 25
H6
0.045
0.090
1450
10 × 30
H7
0.035
0.070
1830
12.5 × 20
Ⅰ5
0.038
0.076
1700
12.5 × 25
Ⅰ6
0.030
0.060
1950
12.5 × 25
Ⅰ6
0.030
0.060
1950
12.5 × 20
Ⅰ5
0.038
0.076
1700
10 × 30
H7
0.035
0.070
1830
12.5 × 20
Ⅰ5
0.038
0.076
1700
18 × 16
K4
0.038
0.076
2010
12.5 × 30
Ⅰ7
0.025
0.050
2330
16 × 20
J5
0.029
0.058
2230
12.5 × 35
Ⅰ8
0.022
0.044
2620
12.5 × 40
Ⅰ9
0.017
0.034
3160
16 × 25
J6
0.022
0.044
2650
18 × 20
K5
0.028
0.056
2500
10 × 30
H7
0.035
0.070
1830
12.5 × 20
Ⅰ5
0.038
0.076
1700
16 × 16
J4
0.043
0.086
1700
12.5 × 25
Ⅰ6
0.030
0.060
1950
18 × 16
K4
0.038
0.076
2010
12.5 × 30
Ⅰ7
0.025
0.050
2330
2230
12.5 × 25
Ⅰ6
0.030
0.060
1950
16 × 20
J5
0.029
0.058
12.5 × 25
Ⅰ6
0.030
0.060
1950
12.5 × 35
Ⅰ8
0.022
0.044
2620
18 × 16
K4
0.038
0.076
2010
16 × 20
J5
0.029
0.058
2230
12.5 × 30
Ⅰ7
0.025
0.050
2330
12.5 × 40
Ⅰ9
0.017
0.034
3160
16 × 25
J6
0.022
0.044
2650
18 × 20
K5
0.028
0.056
2500
16 × 25
J6
0.022
0.044
2650
16 × 31.5
J7
0.018
0.036
3210
18 × 25
K6
0.020
0.040
3000
18 × 35.5
K8
0.015
0.030
3960
18 × 40
K9
0.014
0.028
4300
—
4700
5600
0.085
0.090
10 × 16
10 × 25
3300
G4
H3
10 × 12.5
—
2200
2700
8 × 15
10 × 12.5
16 × 20
J5
0.029
0.058
2230
12.5 × 35
Ⅰ8
0.022
0.044
2620
12.5 × 40
Ⅰ9
0.017
0.034
3160
16 × 25
J6
0.022
0.044
2650
16 × 31.5
J7
0.018
0.036
3210
18 × 25
K6
0.020
0.040
3000
16 × 31.5
J7
0.018
0.036
3210
16 × 40
J9
0.015
0.030
3880
18 × 25
K6
0.020
0.040
3000
18 × 35.5
K8
0.015
0.030
3960
12000
18 × 25
K6
0.020
0.040
3000
—
—
—
—
—
—
—
—
—
15000
18 × 35.5
K8
0.015
0.030
3960
18 × 40
K9
0.014
0.028
4300
—
—
—
—
—
18000
18 × 40
K9
0.014
0.028
4300
—
—
—
—
—
—
—
—
—
—
(Note) Rated ripple current : 105℃ , 100kHz ; ESR : 100kHz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
RJD
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS
Standard Ratings
Rated voltage(V)
Item
Rated
capacitance
(µF)
10
22
27
33
47
56
82
100
150
180
220
25
Case
φD × L (mm)
5 × 11.5
5 × 11.5
5 × 11.5
5 × 11.5
5 × 11.5
5 × 11.5
6.3 × 11.5
6.3 × 11.5
8 × 12
—
8 × 12
35
ESR(Ω max.)
Casing
symbol
20℃
-10℃
E3
E3
E3
E3
E3
E3
F3
F3
G3
—
G3
0.50
0.50
0.50
0.50
0.50
0.50
0.25
0.25
0.117
—
0.117
1.0
1.0
1.0
1.0
1.0
1.0
0.50
0.50
0.234
—
0.234
Rated ripple
current
Case
(mArms)
φD × L (mm)
182
182
182
182
182
182
295
295
567
—
567
270
8 × 12
G3
0.117
0.234
567
330
8 × 12
10 × 12.5
G3
H3
0.117
0.090
0.234
0.180
567
764
390
G4
0.085
0.170
733
8 × 15
10 × 12.5
8 × 20
10 × 16
10 × 16
10 × 20
12.5 × 15
10 × 25
12.5 × 20
G4
H3
G5
H4
H4
H5
Ⅰ4
H6
Ⅰ5
0.085
0.090
0.065
0.068
0.068
0.052
0.062
0.045
0.038
0.170
0.180
0.130
0.136
0.136
0.104
0.124
0.090
0.076
733
764
996
1060
1060
1230
1210
1450
1700
12.5 × 20
Ⅰ5
0.038
0.076
1700
10 × 30
16 × 16
12.5 × 25
18 × 16
H7
J4
Ⅰ6
K4
0.035
0.043
0.030
0.038
0.070
0.086
0.060
0.076
1830
1700
1950
2010
12.5 × 30
Ⅰ7
0.025
0.050
2330
16 × 20
J5
0.029
0.058
2230
12.5 × 35
18 × 25
12.5 × 40
16 × 25
18 × 20
Ⅰ8
K6
Ⅰ9
J6
K5
0.022
0.020
0.017
0.022
0.028
0.044
0.040
0.034
0.044
0.056
2620
3000
3160
2650
2500
3900
—
—
—
—
—
4700
18 × 25
K6
0.020
0.040
3000
18 × 35.5
20 × 25
18 × 35.5
20 × 30
K8
L6
K8
L7
0.015
0.019
0.015
0.018
0.030
0.038
0.030
0.036
3960
3920
3960
4270
470
560
680
820
1000
1200
1500
1800
2200
2700
3300
5600
6800
8200
10000
8 × 15
Item
10
22
27
33
47
56
82
100
150
180
220
330
470
560
680
820
1000
1500
1800
Rated ripple
current
Case
φD × L (mm)
ESR(Ω max.)
Rated ripple
current
Casing
symbol
20℃
-10℃
(mArms)
5 × 11.5
5 × 11.5
5 × 11.5
5 × 11.5
6.3 × 11.5
6.3 × 11.5
6.3 × 11.5
8 × 12
8 × 12
8 × 12
8 × 15
8 × 15
10 × 12.5
8 × 20
10 × 16
8 × 20
10 × 16
E3
E3
E3
E3
F3
F3
F3
G3
G3
G3
G4
G4
H3
G5
H4
G5
H4
0.50
0.50
0.50
0.50
0.25
0.25
0.25
0.117
0.117
0.117
0.085
0.085
0.090
0.065
0.068
0.065
0.068
1.0
1.0
1.0
1.0
0.50
0.50
0.50
0.234
0.234
0.234
0.170
0.170
0.180
0.130
0.136
0.130
0.136
182
182
182
182
295
295
295
567
567
567
733
733
764
996
1060
996
1060
10 × 20
H5
0.052
0.104
1230
10 × 20
12.5 × 15
10 × 25
H5
Ⅰ4
H6
0.052
0.062
0.045
0.104
0.124
0.090
1230
1210
1450
12.5 × 20
Ⅰ5
0.038
0.076
1700
10 × 30
12.5 × 20
12.5 × 25
18 × 16
12.5 × 30
16 × 20
12.5 × 35
16 × 20
12.5 × 40
16 × 25
18 × 20
16 × 31.5
18 × 25
H7
Ⅰ5
Ⅰ6
K4
Ⅰ7
J5
Ⅰ8
J5
Ⅰ9
J6
K5
J7
K6
0.035
0.038
0.030
0.038
0.025
0.029
0.022
0.029
0.017
0.022
0.028
0.018
0.020
0.070
0.076
0.060
0.076
0.050
0.058
0.044
0.058
0.034
0.044
0.056
0.036
0.040
1830
1700
1950
2010
2330
2230
2620
2230
3160
2650
2500
3210
3000
18 × 25
K6
0.020
0.040
3000
18 × 31.5
K7
0.016
0.032
3660
18 × 35.5
18 × 40
20 × 25
18 × 35.5
18 × 40
20 × 30
18 × 40
20 × 35.5
18 × 40
20 × 40
18 × 40
20 × 40
K8
K9
L6
K8
K9
L7
K9
L8
K9
L9
K9
L9
0.015
0.014
0.019
0.015
0.014
0.018
0.014
0.014
0.014
0.013
0.014
0.013
0.030
0.028
0.038
0.030
0.028
0.036
0.028
0.028
0.028
0.026
0.028
0.026
3960
4300
3920
3960
4300
4270
4300
5250
4300
5680
4300
5680
—
—
—
—
—
—
—
—
—
—
—
—
—
Rated ripple
current
Case
20℃
-10℃
(mArms)
5 × 11.5
5 × 11.5
5 × 11.5
6.3 × 11.5
6.3 × 11.5
6.3 × 11.5
8 × 12
8 × 15
10 × 12.5
10 × 12.5
10 × 16
Casing
symbol
20℃
-10℃
(mArms)
E3
E3
E3
F3
F3
F3
G3
G4
H3
H3
H4
0.90
0.90
0.90
0.40
0.40
0.40
0.19
0.155
0.17
0.17
0.119
1.8
1.8
1.8
0.80
0.80
0.80
0.38
0.31
0.34
0.34
0.238
173
173
173
285
285
285
508
636
628
628
850
10 × 20
H5
0.081
0.162
1120
10 × 20
12.5 × 15
H5
Ⅰ4
0.081
0.09
0.162
0.18
1120
1170
—
—
—
—
—
12.5 × 20
Ⅰ5
0.057
0.114
1540
12.5 × 25
Ⅰ6
0.042
0.084
1910
18 × 20
12.5 × 30
18 × 20
16 × 25
18 × 20
K5
Ⅰ7
K5
J6
K5
0.034
0.038
0.034
0.031
0.034
0.068
0.076
0.068
0.062
0.068
2420
2290
2420
2450
2420
18 × 25
K6
0.029
0.058
2750
16 × 31.5
18 × 25
16 × 35.5
18 × 31.5
J7
K6
J8
K7
0.027
0.029
0.023
0.025
0.054
0.058
0.046
0.050
3100
2750
3530
3200
16 × 40
J9
0.020
0.040
3830
18 × 35.5
K8
0.022
0.044
3670
18 × 40
K9
0.018
0.036
4160
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
20 × 35.5
L8
0.014
0.028
5250
18 × 40
20 × 40
K9
L9
0.014
0.013
0.028
0.026
4300
5680
—
—
Case
Rated ripple
current
Case
φD × L (mm)
Casing
symbol
20℃
-10℃
(mArms)
φD × L (mm)
Casing
symbol
20℃
-10℃
(mArms)
φD × L (mm)
Casing
symbol
5 × 11.5
6.3 × 11.5
6.3 × 11.5
6.3 × 11.5
8 × 12
8 × 12
8 × 20
10 × 16
10 × 20
10 × 25
12.5 × 20
12.5 × 25
12.5 × 30
16 × 25
16 × 25
18 × 20
16 × 31.5
18 × 25
16 × 31.5
18 × 25
16 × 35.5
18 × 31.5
18 × 35.5
18 × 40
E3
F3
F3
F3
G3
G3
G5
H4
H5
H6
Ⅰ5
Ⅰ6
Ⅰ7
J6
J6
K5
J7
K6
J7
K6
J8
K7
K8
K9
1.1
0.54
0.54
0.54
0.32
0.32
0.17
0.17
0.12
0.10
0.075
0.065
0.055
0.052
0.052
0.058
0.042
0.050
0.042
0.050
0.036
0.042
0.035
0.032
2.2
1.1
1.1
1.1
0.64
0.64
0.34
0.34
0.24
0.20
0.15
0.13
0.11
0.104
0.104
0.116
0.084
0.10
0.084
0.10
0.072
0.084
0.070
0.064
162
265
265
265
406
406
682
710
920
1110
1340
1730
2110
2180
2180
2290
2710
2610
2710
2610
2820
3080
3530
3880
5 × 11.5
8 × 12
—
8 × 12
8 × 15
10 × 12.5
10 × 16
10 × 20
12.5 × 20
—
12.5 × 25
12.5 × 30
16 × 31.5
18 × 25
16 × 31.5
18 × 25
16 × 35.5
18 × 31.5
16 × 40
18 × 35.5
E3
G3
-
G3
G4
H3
H4
H5
Ⅰ5
-
Ⅰ6
Ⅰ7
J7
K6
J7
K6
J8
K7
J9
K8
1.9
0.53
-
0.53
0.35
0.47
0.32
0.25
0.13
-
0.11
0.090
0.059
0.064
0.059
0.064
0.052
0.054
0.045
0.044
3.8
1.1
-
1.1
0.70
0.94
0.64
0.50
0.26
-
0.22
0.18
0.118
0.128
0.118
0.128
0.104
0.108
0.090
0.088
123
315
-
315
423
392
520
640
1010
-
1200
1440
2100
1980
2100
1980
2340
2350
2650
2730
6.3 × 11.5
8 × 12
—
8 × 15
10 × 12.5
10 × 16
10 × 20
10 × 25
12.5 × 25
—
12.5 × 30
16 × 25
16 × 35.5
18 × 31.5
16 × 40
18 × 35.5
16 × 40
18 × 35.5
F3
G3
-
G4
H3
H4
H5
H6
Ⅰ6
-
Ⅰ7
J6
J8
K7
J9
K8
J9
K8
1.1
0.53
-
0.35
0.47
0.32
0.25
0.155
0.11
-
0.090
0.079
0.052
0.054
0.045
0.044
0.045
0.044
2.2
1.1
-
0.70
0.94
0.64
0.50
0.31
0.22
-
0.18
0.16
0.104
0.108
0.090
0.088
0.090
0.088
186
315
-
423
392
520
640
636
1200
-
1450
1650
2340
2350
2650
2730
2650
2730
18 × 40
K9
0.039
0.078
3050
18 × 40
K9
0.039
0.078
3050
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
Rated voltage(V)
Rated
capacitance
(µF)
50
ESR(Ω max.)
63
80
ESR(Ω max.)
100
ESR(Ω max.)
ESR(Ω max.)
Rated ripple
current
(Note) Rated ripple current : 105℃ , 100kHz ; ESR : 100kHz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
RJE
MMINIATURE
MINIATUREALUMINUM
ALUMINUMELECTROLYTIC
ELECTROLYTICCAPACITORS
CAPACITORS
GREEN
CAP
For SRS AirBag
●
●
●
105˚C
5000hours
®
Anticleaning For AirBag
solvent
For SRS AirBag application
Special tolerance at rated capacitance and high capacitance,
and good low temperature behavior.
For SAS AirBag
Guarantees 5000 hours at 105℃.
RJE
RJD
Marking color : White print on a black sleeve
Specifications
Item
Performance
ー55 to +105
0 to +30
Category temperature range (℃)
Tolerance at rated capacitance (%)
Leakage current (µA)
(max.)
Tangent of loss angle
(tanδ)
(20℃,120Hz)
0.01CV (after 2 minutes) C : Rated capacitance (µF) , V : Rated voltage (V)
Rated voltage (V)
tanδ (max.)
0.02 is added to every 1000µF increase over 1000µF
25
0.20
and low temperature
35
0.16
(20℃,120Hz)
Rated voltage (V)
Impedance ratio (max.)
Zー55℃/Z+20℃
Characteristics at high
(20℃)
25
3
35
3
(120Hz)
5000 hours
The initial specified value or less
Within ±30% of initial value
300% or less of the initial specified value
Test time
Leakage current
Percentage of capacitance change
Tangent of loss angle
Endurance (105℃)
Shelf life (105℃)
Test time : 1000hours ; other items are same as the endurance. Voltage application treatment : According to JIS C5101-4 4.1
Applicable standards
JIS C5101 - 1,
- 4 (IEC 60384 - 1,
- 4)
Outline Drawing
Unit : mm
Coefficient of Frequency for Rated Ripple Current
Frequency (Hz)
Sleeve
φd±0.05 copper plated steel wire (tinned)
L+α max.
φD
F
φd
α
Rated
capacitance (μF)
830 to 1100
1200 to 11000
50・60
120
1k
10k・100k
0.70
0.80
0.75
0.85
0.90
0.95
1
1
F±0.5
φD+0.5/0
Vent
12.5
5.0
0.6
2.0
16
7.5
0.8
2.0
Part numbering system (example : 25V4200µF)
5
min.
15min.
RJE ̶
18
7.5
0.8
2.0
25
V
Rated voltage
symbol
Series code
422
A
Ⅰ9 (#)Q ̶
Casing
Rated capacitance Capacitance
symbol
tolerance symbol symbol
Optional
symbol
Taping(Forming)
symbol
If it is whisker preventive structure, should change“#”into“G”
.
(Note) Whisker preventive structure is possible.
Standard Ratings
Rated voltage(V)
Item
Case size Casing
symbol
φD×L (mm)
12.5×15
Ⅰ4
25
Rated
capacitance
(µF)
20℃
35
ESR
Ω (max.)
Rated ripple
current
ー 40℃
(mArms)
Rated
capacitance
(µF)
20℃
ESR
Ω (max.)
Rated ripple
current
ー 40℃
(mArms)
1100
0.174
0.52
1210
830
0.174
0.52
1210
12.5×20
Ⅰ5
1800
0.107
0.27
1670
1300
0.107
0.27
1670
12.5×25
Ⅰ6
2400
0.084
0.21
1950
1600
0.084
0.21
1950
12.5×30
Ⅰ7
3200
0.070
0.18
2330
2200
0.070
0.18
2330
12.5×35
Ⅰ8
3700
0.062
0.16
2620
2500
0.062
0.16
2620
12.5×40
Ⅰ9
4200
0.048
0.12
3160
2900
0.048
0.12
3160
16×16
J4
2100
0.121
0.36
1700
1500
0.121
0.36
1700
16×20
J5
3100
0.082
0.21
2230
2100
0.082
0.21
2230
16×25
J6
4300
0.062
0.16
2650
3000
0.062
0.16
2650
16×31.5
J7
5800
0.051
0.13
3210
4000
0.051
0.13
3210
16×35.5
J8
6800
0.045
0.11
3570
4600
0.045
0.11
3570
16×40
J9
7800
0.042
0.11
3880
5300
0.042
0.11
3880
18×16
K4
3000
0.107
0.32
2010
2100
0.107
0.32
2010
18×20
K5
4300
0.079
0.20
2500
3000
0.079
0.20
2500
18×25
K6
6000
0.056
0.14
3000
4200
0.056
0.14
3000
18×31.5
K7
8000
0.045
0.11
3660
5600
0.045
0.11
3660
18×35.5
K8
9300
0.042
0.11
3960
6500
0.042
0.11
3960
18×40
K9
11000
0.040
0.10
4300
7400
0.040
0.10
4300
(Note) Rated ripple current : 105℃, 100kHz ; ESR : 100kHz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
RJK
MINIATURE
ALUMINUM
ELECTROLYTIC
CAPACITORS
MINIATURE
ALUMINUM
ELECTROLYTIC
CAPACITORS
GREEN
CAP
For SRS AirBag
●
●
●
105˚C
5000hours
®
Anticleaning For AirBag
solvent
For SRS AirBag application
Special tolerance at rated capacitance and high capacitance,
and good low temperature behavior.
Miniaturized
Guarantees 5000 hours at 105℃.
Low ESR
RJK
RJE
Marking color : White print on a black sleeve
Specifications
Item
Performance
ー55 to +105
0 to +30
Category temperature range (℃)
Tolerance at rated capacitance (%)
Leakage current (µA)
(max.)
Tangent of loss angle
(tanδ)
(20℃,120Hz)
0.01CV (after 2 minutes) C : Rated capacitance (µF) , V : Rated voltage (V)
Rated voltage (V)
tanδ (max.)
0.02 is added to every 1000µF increase over 1000µF
25
0.20
and low temperature
35
0.16
(20℃,120Hz)
Rated voltage (V)
Impedance ratio (max.)
Zー55℃/Z+20℃
Characteristics at high
(20℃)
25
3
35
3
(120Hz)
5000 hours
The initial specified value or less
Within ±30% of initial value
300% or less of the initial specified value
Test time
Leakage current
Percentage of capacitance change
Tangent of loss angle
Endurance (105℃)
Shelf life (105℃)
Test time : 1000hours ; other items are same as the endurance. Voltage application treatment : According to JIS C5101-4 4.1
Applicable standards
JIS C5101 - 1,
- 4 (IEC 60384 - 1,
- 4)
Outline Drawing
Unit : mm
Coefficient of Frequency for Rated Ripple Current
Frequency (Hz)
Sleeve
φd±0.05 copper plated steel wire (tinned)
F±0.5
φD+0.5/0
Vent
L+α max.
φD
F
φd
α
16
7.5
0.8
1.5
18
7.5
0.8
1.5
15min.
5
min.
20
10.0
1.0
1.5
Rated voltage (V)
25, 35
120
1k
10k
100k
0.80
0.85
0.95
1
Part numbering system (example : 25V4200µF)
RJK ̶
Series code
25
Rated voltage
symbol
V
422
A
J5
Casing
Rated capacitance Capacitance
symbol
tolerance symbol symbol
#Q ̶
Optional
symbol
Taping(Forming)
symbol
If it is whisker preventive structure, should change“#”into“G”
.
(Note) Whisker preventive structure is possible.
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
RJK
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS
Standard Ratings
Rated voltage (V)
Item
Case
Casing
φD × L (mm) symbol
25
Rated
capacitance
35
ESR
(Ω max.)
Rated ripple
current
Rated
capacitance
ESR
(Ω max.)
Rated ripple
current
(µF)
20℃
− 40℃
(mArms)
(µF)
20℃
− 40℃
16 × 20
J5
4200
0.033
0.095
2250
2500
0.033
0.095
(mArms)
2250
18 × 20
K5
5300
0.029
0.082
2500
3100
0.029
0.082
2500
16 × 25
J6
5900
0.024
0.073
2600
3500
0.024
0.073
2600
18 × 25
K6
7500
0.022
0.063
2800
4500
0.022
0.063
2800
16 × 31.5
J7
8000
0.021
0.052
3200
4700
0.021
0.052
3200
18 × 31.5
K7
9500
0.019
0.046
3500
5600
0.019
0.046
3500
16 × 35.5
J8
10000
0.019
0.045
3500
6000
0.019
0.045
3500
18 × 35.5
K8
11000
0.017
0.040
3700
7100
0.017
0.040
3700
16 × 40
J9
11000
0.017
0.040
3800
6600
0.017
0.040
3800
18 × 40
K9
14000
0.015
0.035
4000
8400
0.015
0.035
4000
20 × 40
L9
17000
0.015
0.035
4000
10000
0.015
0.035
4000
(Note) Rated ripple current : 105℃, 100kHz ; ESR : 100kHz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
RHS
RHS
MINIATURE
ALUMINUM
ELECTROLYTIC
CAPACITORS
MINIATURE
ALUMINUM
ELECTROLYTIC
CAPACITORS
105˚C Use, Miniature, High-Ripple, Long Life Capacitors
●
●
●
®
GREEN
CAP
105˚C
5000hours
Higher ripple current.
Guarantees 4000 to 5000 hours at 105℃.
Best-suited to On-Board-Charger for EV, PHEV.
High ripple, Long life
RHS
RJ4
Marking color : White print on a black sleeve
Specifications
Item
Performance
Category temperature range (℃)
−40 to +105
Tolerance at rated capacitance (%)
±20
Leakage current (µA)
(max.)
(20℃,120Hz)
CV≦1000:0.06CV+40 (after 1 minutes) CV>1000:0.03CV+70 (after 1 minutes)
C : Rated capacitance (µF), V : Rated voltage (V)
Tangent of loss angle
(tanδ)
(20℃)
Rated voltage (V)
160 to 250
350 to 400
450
Tangent of loss angle
0.12
0.15
0.20
(20℃,120Hz)
Rated voltage (V)
Characteristics at high
and low temperature
Impedance ratio
160 to 250
350 to 450
Z−25℃/Z+20℃
3
5
Z−40℃/Z+20℃
4
6
(120Hz)
φ10
: 4000 hours
φ12.5 to φ22 : 5000 hours
Test time
Endurance (105℃)
(Applied ripple current)
The initial specified value or less
Leakage current
Within ±20% of initial value
Capacitance change
300% or less of the initial specified value
Tangent of loss angle
1000 hours
Test time
The initial specified value or less
Leakage current
Shelf life (105℃)
Capacitance change
Within ±20% of initial value
Tangent of loss angle
200% or less of the initial specified value
Voltage application treatment : According to JIS C5101-4 4.1
Applicable Standards
JIS C5101 - 1,
- 4 (IEC 60384 - 1,
- 4)
Outline Drawing
Sleeve
φd±0.05 copper plated steel wire (tinned)
F±0.5
φD+0.5/0
Vent
Unit : mm
L+αmax.
15min.
5
min.
Coefficient of Frequency for Rated Ripple Current
Frequency (Hz)
Rated voltage (V) Rated
50 • 60
capacitance (µF)
4.7 to 10
0.80
160 to 250
12 to 47
0.80
56 to 560
0.80
1 to 10
0.80
350 to 450
12 to 18
0.80
22 or more
0.80
120
1k
10k
100k
1
1
1
1
1
1
1.75
1.60
1.30
1.75
1.60
1.40
2.00
1.80
1.40
2.00
1.80
1.50
2.50
2.00
1.40
2.50
2.00
1.50
Part numbering system (example : 400V10µF)
φD
F
φd
10
5.0
0.6
12.5
5.0
0.6
16
7.5
0.8
18
7.5
0.8
20
10
0.8
22
10
1.0
α
2
2.5
2.5
20L
: 3.0
25 to 50L : 2.5
2.5
2.5
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
RHS ̶ 400 V
Series code
Rated voltage
symbol
100
M
Ⅰ5 #
Rated capacitance Capacitance
Casing
symbol
tolerance symbol symbol
B
Optional
symbol
̶
Taping(Forming)
symbol
CAT.No.2021/2022E
RHS
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS
Standard Ratings
Rated voltage(V)
160
200
250
350
400
450
Rated
Rated ripple
Rated
Rated ripple
Rated
Rated ripple
Rated
Rated ripple
Rated
Rated ripple
Rated
Rated ripple
current
current
current
current
current
current
capacitance
capacitance
capacitance
capacitance
capacitance
capacitance
Symbol
(µF)
(mArms)
(µF)
(mArms)
(µF)
(mArms)
(µF)
(mArms)
(µF)
(mArms)
(µF)
(mArms)
case(mm)
φD
L
22
10
10
12.5
16
4.7
27
160
33
170
39
185
47
245
56
270
68
315
H4
20
H5
10
25
H6
10
30
H7
12.5
20
Ⅰ5
25
Ⅰ6
16
31.5
J7
235
68
335
82
370
100
440
-
-
100
120
520
150
580
-
-
365
250
320
150
580
100
450
68
370
180
660
120
574
100
520
220
770
150
605
120
540
270
940
180
765
220
845
150
700
1060
390
1200
4.7
65
4.7
50
95
6.8
80
6.8
80
8.2
100
10
12
120
15
135
22
160
-
-
27
220
33
250
27
220
10
15
135
12
120
18
165
15
150
22
180
22
180
-
22
200
240
27
240
265
33
265
39
310
47
340
47
340
-
33
-
250
-
-
-
-
-
-
56
420
68
475
22
205
22
205
33
250
27
225
47
300
47
300
33
250
68
420
68
440
47
380
82
510
56
445
100
590
68
490
-
220
800
150
920
120
530
56
370
150
620
68
435
180
710
82
490
220
830
100
570
270
950
120
690
910
180
33
-
220
18
200
27
680
780
-
320
120
180
-
280
710
645
-
47
180
150
110
39
875
480
10
245
270
100
90
33
450
47
330
85
68
33
860
45
8.2
505
393
270
30
2.2
100
305
640
1
43
370
68
180
40
3.3
56
47
1070
2.2
65
430
490
390
55
4.7
82
470
J9
K7
120
68
585
40
31.5
440
280
120
16
18
400
47
715
965
K6
82
100
3.3
22
180
330
25
240
33
J8
18
220
39
305
35.5
K5
33
280
16
20
170
56
750
J6
22
47
220
25
260
-
335
Ⅰ8
16
47
-
-
68
35
J5
170
290
12.5
20
140
33
47
580
16
22
350
150
Ⅰ9
96
68
Ⅰ7
40
10
95
425
30
12.5
65
10
-
65
100
12.5
18
4.7
H3
10
12.5
145
-
-
82
580
100
620
120
720
-
-
82
600
100
660
39
310
47
360
-
-
-
-
68
470
82
570
82
610
100
640
120
670
100
630
730
18
35.5
K8
470
1400
330
1180
270
1070
150
820
150
800
120
18
40
K9
-
-
390
1350
-
-
180
940
-
-
-
-
18
45
KA
560
1600
470
1270
330
1240
220
1100
180
980
150
880
18
50
KB
680
1900
560
1800
390
1500
-
-
-
-
180
1000
20
40
L9
-
-
-
-
-
-
220
1110
-
-
150
935
20
45
LA
-
-
-
-
-
-
270
1200
-
-
180
1050
20
50
LB
820
2300
-
-
470
1700
-
-
-
-
220
1230
22
40
N9
680
1945
560
1765
390
1475
270
1297
220
1170
180
1065
22
45
NA
820
2235
-
-
470
1695
330
1511
-
-
220
1235
22
50
NB
1000
2575
-
-
560
1930
-
-
-
-
270
1430
(Note) Rated ripple current : 105℃ , 120Hz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
RHC
RHC
MINIATURE
ALUMINUM
ELECTROLYTIC
CAPACITORS
MINIATURE
ALUMINUM
ELECTROLYTIC
CAPACITORS
105˚C Use, Miniature, High-Ripple, Long Life Capacitors
●
●
●
®
GREEN
CAP
105˚C
10000hours
Higher ripple current.
Guarantees 5000 to 10000 hours at 105℃.
Best-suited On-Board-Charger for EV, PHEV.
High ripple, Long life
RHC
RHS
Marking color : White print on a black sleeve
Specifications
Item
Performance
Category temperature range (℃)
−40 to +105
Tolerance at rated capacitance (%)
±20
Leakage current (µA)
(max.)
(20℃,120Hz)
0.04CV + 100 (after 1 minutes) C : Rated capacitance (µF), V : Rated voltage (V)
Tangent of loss angle
(tanδ)
(20℃)
Rated voltage (V)
160 to 250
350 to 450
Tangent of loss angle
0.15
0.20
(20℃,120Hz)
Rated voltage (V)
Characteristics at high
and low temperature
Impedance ratio
(max.)
160 to 250
350 to 450
Z−25℃/Z+20℃
3
5
Z−40℃/Z+20℃
6
6
(120Hz)
φ10×12.5L
: 5000 hours
φ10×16L to 25L
: 8000 hours
φ10×30L, φ12.5 to φ22 : 10000 hours
Test time
Endurance (105℃)
(Applied ripple current)
The initial specifide value or less
Leakage current
Capacitance change
Within ±30% of initial value
Tangent of loss angle
300% or less of the initial specified value
1000 hours
Test time
The initial specifide value or less
Leakage current
Shelf life (105℃)
Capacitance change
Within ±20% of initial value
Tangent of loss angle
200% or less of the initial specified value
Voltage application treatment : According to JIS C5101-4 4.1
JIS C5101 - 1,
- 4 (IEC 60384 - 1,
- 4)
Applicable standards
Outline Drawing
Sleeve
φd±0.05 copper plated steel wire (tinned)
F±0.5
φD+0.5/0
Vent
Unit : mm
L+αmax.
15min.
Coefficient of Frequency for Rated Ripple Current
Frequency (Hz)
Rated
capacitance (µF)
1 to 5.6
6.8 to 18
22 to 82
100 or more
120
1k
10k
100k
0.20
0.30
0.40
0.45
0.40
0.60
0.70
0.75
0.80
0.90
0.90
0.90
1
1
1
1
Part numbering system (example : 400V10µF)
5
min.
RHC ̶ 400
φD
F
φd
10
5.0
0.6
12.5
5.0
0.6
16
7.5
0.8
18
7.5
0.8
20
10
0.8
22
10
1.0
α
2
2.5
2.5
20L
: 3.0
25 to 50L : 2.5
2.5
2.5
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
Series code
Rated voltage
symbol
V
100
M
H5 # B
Rated capacitance
Capacitance
Casing
symbol
tolerance symbol symbol
Optional
symbol
̶
Taping(Forming)
symbol
CAT.No.2021/2022E
RHC
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS
Standard Ratings
Rated voltage(V)
160
200
250
350
400
450
Rated
Rated ripple
Rated
Rated ripple
Rated
Rated ripple
Rated
Rated ripple
Rated
Rated ripple
Rated
Rated ripple
current
current
current
current
current
current
capacitance
capacitance
capacitance
capacitance
capacitance
capacitance
Symbol
(µF)
(mArms)
(µF)
(mArms)
(µF)
(mArms)
(µF)
(mArms)
(µF)
(mArms)
(µF)
(mArms)
case(mm)
φD
L
4.7
10
12.5
H3
-
10
10
16
39
665
47
730
56
830
68
895
H4
10
20
H5
10
25
H6
82
1090
10
30
H7
100
1345
12.5
20
Ⅰ5
12.5
25
Ⅰ6
12.5
30
Ⅰ7
100
1495
120
1645
150
1790
180
1970
12.5
35
Ⅰ8
220
2140
12.5
40
Ⅰ9
270
2580
150
16
20
1995
J5
180
225
-
2125
6.8
300
470
22
570
27
580
33
640
47
4.7
225
6.8
250
8.2
270
10
22
570
27
710
33
700
56
945
39
825
68
1015
47
885
82
1250
56
1080
47
1125
56
1200
68
1330
82
1430
100
1295
100
1540
120
1695
150
1865
180
1985
-
68
-
1485
270
3.3
5.6
18
22
675
690
-
-
-
-
33
245
285
525
780
68
4.7
1040
4.7
450
6.8
475
10
500
12
595
15
620
18
650
22
765
27
815
33
22
2.2
210
3.3
245
3.9
255
4.7
400
6.8
445
10
500
15
620
18
725
935
22
835
925
18
870
27
985
22
925
33
1075
39
1160
27
1055
33
1095
47
1220
47
1245
1590
56
1300
47
1220
120
1700
68
1420
56
1320
39
1155
150
2090
82
1690
68
1575
56
1465
68
1485
22
1055
22
1055
33
1185
27
1120
47
1320
33
1185
56
1350
39
1195
47
1330
56
1500
68
1615
100
1710
82
1590
120
1830
100
1710
150
2020
180
2155
120
1855
220
2450
150
2135
270
2640
180
2280
47
1320
56
1405
82
1640
68
1525
100
1865
82
1730
16
25
J6
220
2320
16
31.5
J7
330
3000
16
35.5
J8
390
3330
-
-
220
2530
120
2000
100
1875
82
1740
16
40
J9
470
3775
330
3120
270
2805
150
2300
120
2110
100
1975
150
1950
56
1380
47
1295
180
2080
68
1485
56
1380
220
82
1710
68
1595
100
1905
82
1765
120
2035
100
1905
18
20
K5
18
25
K6
18
31.5
K7
18
35.5
18
18
220
2235
120
1790
82
1590
2380
150
2055
270
2540
180
2190
100
1840
330
2865
220
2445
150
2215
330
2725
390
2985
470
3185
K8
-
-
390
3095
270
2730
180
2450
150
2300
120
2110
40
K9
560
4070
470
3465
330
3085
220
2720
-
-
150
2420
45
KA
680
4140
560
3755
-
-
-
-
180
2655
-
-
390
3605
470
3840
270
3305
220
3065
180
2850
18
50
KB
820
4595
-
-
20
20
40
L9
680
3850
560
3735
390
3220
-
-
-
-
-
-
45
LA
820
4435
680
4320
470
3705
270
3190
-
-
180
2750
20
22
50
LB
1000
5115
-
-
560
4225
330
3685
270
3425
220
3175
40
N9
820
4270
680
4160
470
3570
270
3070
220
2850
180
2650
22
45
NA
1000
4945
-
-
560
4085
330
3560
270
3310
220
3070
22
50
NB
-
-
820
4995
680
4695
-
-
330
3815
270
3550
(Note) Rated ripple current : 105℃ , 100Hz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
RHD
RHD
MINIATURE
ALUMINUM
ELECTROLYTIC
CAPACITORS
MINIATURE
ALUMINUM
ELECTROLYTIC
CAPACITORS
105˚C Use, Miniature, High-Ripple, Long Life Capacitors
●
●
●
®
GREEN
CAP
105˚C
12000hours
Higher ripple current.
Guarantees 8000 to 12000 hours at 105℃.
Best-suited to On-Board-Charger for EV, PHEV.
Long life
RHD
RHC
Marking color : White print on a black sleeve
Specifications
Item
Performance
Category temperature range (℃)
−40 to +105
Tolerance at rated capacitance (%)
±20
Leakage current(µA)
(max.)
(20℃,120Hz)
0.04CV + 100 (after 1 minutes) C:Rated capacitance (µF),V:Rated Voltage (V)
Rated voltage (V)
Tangent of loss angle
160 to 250
Tangent of loss angle
(tanδ)
(20℃)
350 to 450
0.20
0.15
(20℃,120Hz)
Rated voltage (V)
Characteristics at high
Impedance ratio
(max.)
and low temperature
160 to 250
350 to 450
Z−25℃/Z+20℃
3
5
Z−40℃/Z+20℃
6
6
(120Hz)
φ10×12.5L
: 8000hours
φ10×16L to 25L
: 10000hours
φ10×30L, φ12.5 to φ22 : 12000hours
Test time
Endurance (105℃)
The initial specified value or less
Leakage current
(Applied ripple current)
Capacitance change
Within ±30% of initial value
Tangent of loss angle
300% or less of the initial specified value
1000hours
Test time
The initial specified value or less
Leakage current
Shelf life (105℃)
Capacitance change
Within ±20% of initial value
Tangent of loss angle
200% or less of the initial specified value
Voltage application treatment : According to JIS C5101-4 4.1
JIS C5101 - 1,
- 4 (IEC 60384 - 1,
- 4)
Applicable Standards
Outline Drawing
φd±0.05 copper plated steel wire (tinned)
Sleeve
F±0.5
φD+0.5/0
Vent
Unit : mm
L+αmax.
Frequency (Hz)
Rated
capacitance(µF)
1 to 5.6
6.8 to 18
22 to 82
100 or more
120
1k
10k
100k
0.20
0.30
0.40
0.45
0.40
0.60
0.70
0.75
0.80
0.90
0.90
0.90
1
1
1
1
Part numbering system (example : 400V47µF)
5
min.
15min.
Coefficient of Frequency for Rated Ripple Current
RHD ̶ 400
Series code
φD
F
φd
10
5.0
0.6
12.5
5.0
0.6
16
7.5
0.8
18
7.5
0.8
20
10
0.8
22
10
1.0
α
2
2.5
2.5
20L
: 3.0
25 to 50L : 2.5
2.5
2.5
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
Rated voltage
symbol
V 470
M
K6 #
Rated capacitance
Capacitance
Casing
symbol
tolerance symbol symbol
B
Optional
symbol
̶
Taping(Forming)
symbol
CAT.No.2021/2022E
RHD
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS
Standard Ratings
Rated voltage(V)
160
200
250
350
400
450
Rated
Rated ripple
Rated
Rated ripple
Rated
Rated ripple
Rated
Rated ripple
Rated
Rated ripple
Rated
Rated ripple
current
current
current
current
current
current
capacitance
capacitance
capacitance
capacitance
capacitance
capacitance
Symbol
(µF)
(mArms)
(µF)
(mArms)
(µF)
(mArms)
(µF)
(mArms)
(µF)
(mArms)
(µF)
(mArms)
case(mm)
φD
10
L
12.5
H3
22
360
10
300
6.8
250
4.7
270
3.3
245
3.3
245
27
380
12
340
8.2
270
5.6
285
4.7
270
3.9
255
33
405
22
360
10
300
6.8
305
6.8
305
4.7
270
665
15
595
6.8
445
27
580
22
570
39
10
10
16
20
H4
H5
33
640
12
595
12
595
10
500
830
39
725
15
620
15
620
12
575
68
895
47
780
22
690
18
650
15
620
56
22
765
27
815
18
725
82
1090
10
30
H7
100
1345
12.5
25
Ⅰ6
12.5
30
Ⅰ7
500
730
H6
Ⅰ5
10
56
25
20
565
47
10
12.5
10
100
1495
120
1645
150
1790
180
1970
33
700
945
39
825
68
1015
47
885
82
1250
56
68
1295
47
82
1385
100
1540
120
1695
27
815
1080
33
935
33
935
22
835
1125
27
985
22
925
18
870
56
1200
33
1040
27
985
22
925
68
1330
39
1160
33
1075
82
1430
47
1245
39
1160
27
1055
33
1095
100
1590
56
1300
47
1220
39
1135
47
1220
12.5
35
Ⅰ8
220
2140
150
1865
120
1700
68
1420
56
1320
12.5
40
Ⅰ9
270
2580
180
2225
150
2090
82
1690
68
1575
56
1465
100
1710
68
1485
47
1290
33
1185
22
1055
22
1055
82
1590
68
1485
27
1120
100
1710
82
1590
33
1185
120
1830
100
1710
39
1195
150
2020
180
2155
47
1330
56
1500
68
1615
82
1740
82
1835
100
1975
47
1295
16
20
J5
16
25
J6
16
31.5
J7
16
35.5
J8
16
40
J9
150
1995
180
2125
220
2320
270
2640
220
330
3000
270
390
3330
-
470
3775
330
150
18
20
K5
220
120
1855
2450
150
2135
2640
180
2280
-
220
2530
3120
270
2805
120
180
2080
1320
33
1185
56
1405
47
1320
68
1525
56
1420
82
1640
68
1525
100
1865
82
1730
120
2000
100
1875
150
68
1950
2235
47
2300
120
2110
1485
39
1205
56
1380
1790
-
-
82
1590
68
1485
56
1380
100
1840
82
1710
68
1595
120
2035
100
1905
82
1765
150
2215
120
2035
100
1905
270
2540
220
2380
150
2055
330
2725
270
2540
180
2190
390
2985
470
3185
330
2865
220
2445
K8
-
-
390
3095
270
2730
180
2450
150
2300
120
2110
40
K9
560
4070
470
3465
330
3085
220
2720
-
-
150
2420
45
KA
680
4140
560
3755
-
-
-
-
180
2655
-
-
390
3605
470
3840
270
3305
220
3065
180
2850
18
25
K6
18
31.5
K7
18
35.5
18
18
18
50
KB
820
4595
-
-
20
20
40
L9
680
3850
560
3735
390
3220
-
-
180
2550
-
-
45
LA
820
4435
680
4320
470
3705
270
3190
220
2960
180
2750
20
22
50
LB
1000
5115
-
-
560
4225
330
3685
-
-
220
3175
40
N9
820
4270
680
4160
470
3570
270
3070
220
2850
180
2650
22
45
NA
1000
4945
-
-
560
4085
330
3560
-
-
220
3070
22
50
NB
-
-
820
4995
680
4695
-
-
270
3450
270
3550
(Note) Rated ripple current : 105℃ , 100kHz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
RKD
MINIATURE
MINIATUREALUMINUM
ALUMINUMELECTROLYTIC
ELECTROLYTICCAPACITORS
CAPACITORS
GREEN
CAP
125°C Use, Miniature, Low ESR Capacitors
●
●
Low
ESR
125˚C
5000hours
®
Anticleaning
solvent
Smaller and low ESR than RK series.
Guarantees 5000 hours at 125℃ (2000 hours: φ8, 3000h: φ10)
(4000 hours: 63V to 100V - φ16x20L)
Miniaturized, Low ESR
RKD
RK
Marking color : White print on a black sleeve
Specifications
Item
Performance
Category temperature range (℃)
ー40 to +125
Tolerance at rated capacitance (%)
±20
Leakage current (µA)
(max.)
0.01CV or 3 whichever is larger (after 2 minutes) C : Rated capacitance (µF), V : Rated voltage (V)
Tangent of loss angle
(tanδ)
(20℃,120Hz)
(20℃)
Rated voltage (V)
10
16
25
35
50
63
80
100
tanδ (max.)
0.20
0.16
0.14
0.12
0.10
0.10
0.08
0.08
(20℃,120Hz)
0.02 is added to every 1000µF increase over 1000µF.
Rated voltage (V)
Characteristics at high
and low temperature
Impedance ratio (max.)
Z−40℃/Z+20℃
10
16
25
35
50
63
80
100
4
3
3
3
3
3
3
3
(120Hz)
5000 hours
Test time
Endurance (125℃)
(Applied ripple current)
(2000 hours: φ8, 3000h: φ10)
(4000 hours: 63V to 100V - φ16x20L)
The initial specified value or less
Leakage current
Within ±30% of initial value
Percentage of capacitance change
300% or less of the initial specified value
Tangent of the loss angle
Shelf life (125℃)
Test time : 1000hours ; other items are same as the endurance. Voltage application treatment : According to JIS C5101-4 4.1
Applicable standards
JIS C5101 - 1,- 4 (IEC 60384 - 1,- 4)
Outline Drawing
φd±0.05 copper plated steel wire (tinned)
Sleeve
Coefficient of Frequency for Rated Ripple Current
Frequency (Hz)
Rated
capacitance (µF)
100 to 330
390 to 1000
1200 to 8200
10k・100k
50・60
120
1k
0.55
0.70
0.80
0.65
0.75
0.85
0.85
0.90
0.95
1
1
1
F±0.5
φD+0.5/0
Vent
Unit : mm
L+α max.
15min.
5
min.
Part numbering system (example : 10V1000µF)
RKD
φD
F
φd
α
8
3.5
0.6
1.0
10
5.0
0.6
2.0
12.5
5.0
0.6
2.0
16
7.5
0.8
2.0
18
7.5
0.8
2.0
20
10.0
1.0
2.0
Series code
̶
10
Rated voltage
symbol
V
102
M
H5
Rated capacitance
symbol
Capacitance
tolerance symbol
Casing
symbol
# ̶
Taping(Forming)
symbol
If it is whisker preventive structure, should change“#”into“G”
.
(Note) Whisker preventive structure is possible.
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
RKD
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS
Standard Ratings
Rated voltage
(V)
Item
Rated
capacitance
(µF)
10
Case
Rated ripple
current
Case
φD × L (mm)
( Ω max.)
(mArms)
100
-
-
-
-
220
8×12
G3
0.153
501
330
8×12
10×12.5
G3
H3
0.153
0.098
470
10×12.5
H3
10×20
12.5×15
1000
φD × L (mm)
Casing
symbol
16
ESR
Casing
symbol
25
ESR
Rated ripple
current
Case
( Ω max.)
(mArms)
φD × L (mm)
501
732
8×12
8×12
10×12.5
8×12
10×12.5
G3
G3
H3
G3
H3
0.153
0.153
0.098
0.153
0.098
501
501
732
501
732
0.098
732
10×16
H4
0.075
953
H5
0.057
1140
Ⅰ4
0.059
1380
10×20
12.5×20
16×16
H5
Ⅰ5
J4
0.057
0.040
0.044
0.075
953
0.057
1140
1140
1820
1930
12.5×20
12.5×25
16×16
Ⅰ5
Ⅰ6
J4
0.040
0.032
0.044
1820
2400
1930
12.5×20
Ⅰ5
0.040
1820
-
-
-
12.5×25
16×20
12.5×30
16×25
18×20
12.5×35
16×25
18×20
Ⅰ6
J5
Ⅰ7
J6
K5
Ⅰ8
J6
K5
0.032
0.032
0.029
0.024
0.029
0.023
0.024
0.029
2400
2280
2560
3100
2490
2970
3100
2490
12 . 5×40
-
-
-
1500
-
-
-
-
-
-
-
-
1800
-
-
-
-
-
-
-
-
Ⅰ6
J5
K4
0.032
0.032
0.041
2400
2280
2170
Ⅰ6
J6
K5
0.032
0.024
0.029
2400
3100
2490
-
-
-
-
-
-
16×25
J6
0.024
3100
16×31.5
J7
0.020
3160
18×20
K5
0.029
2490
18×25
K6
0.022
3200
3300
3900
4700
-
16×31.5
18×25
-
-
-
J7
K6
0.020
0.022
3160
3200
-
-
16×35.5
18×31.5
-
-
-
J8
K7
0.019
0.018
3590
3410
-
Ⅰ9
0.020
3600
16×31.5
J7
0.020
3160
16×35.5
18×25
18×35.5
20×25
16×40
18×35.5
20×30
18×40
20×35.5
20×40
J8
K6
K8
L6
J9
K8
L7
K9
L8
L9
0.019
0.022
0.017
0.022
0.017
0.017
0.019
0.016
0.016
0.015
3590
3200
4200
3500
4300
4200
4000
4600
4700
5100
ESR
5600
-
-
-
-
-
-
-
-
6800
-
-
-
-
-
-
-
-
8200
-
-
-
-
-
-
-
-
Case
Casing
symbol
ESR
Rated ripple
current
Case
ESR
Rated ripple
current
Case
( Ω max.)
(mArms)
φD × L (mm)
Casing
symbol
( Ω max.)
(mArms)
φD × L (mm)
0.081
-
0.057
-
0.038
0.031
0.025
0.022
960
-
1500
-
2150
2620
3140
3510
-
-
-
-
-
-
-
-
-
-
-
-
-
J7
J8
K9
-
-
0.08
0.066
0.051
-
-
1910
2110
2470
-
Rated voltage
(V)
Item
Rated
capacitance
(µF)
220
330
470
560
820
1000
1800
2200
50
φD × L (mm)
10×20
-
12.5×20
-
12.5×30
16×25
18×31.5
18×35.5
H5
-
Ⅰ5
-
Ⅰ7
J6
K7
K8
63
-
16×31.5
16×35.5
18×40
-
8×12
10×12.5
10×16
10×16
10×20
10×20
12.5×20
16×16
12.5×25
16×25
18×20
12.5×30
16×20
12.5×35
16×31.5
18×25
12.5×40
16×25
16×31.5
16×35.5
18×25
16×35.5
18×31.5
20×25
16×40
18×35.5
20×30
H4
-
-
φD × L (mm)
501
501
732
732
953
H5
-
2700
(mArms)
10×20
-
12.5×25
16×25
18×20
( Ω max.)
10×16
-
12.5×25
16×20
18×16
Case
0.153
0.153
0.098
0.098
0.075
-
2200
Rated ripple
current
G3
G3
H3
H3
H4
1200
8×12
8×12
10×12.5
10×12.5
10×16
Casing
symbol
35
ESR
-
Casing
symbol
-
16×20
16×25
18×25
18×35.5
18×40
-
-
-
J5
J6
K6
K8
K9
-
-
Rated ripple
current
( Ω max.)
(mArms)
0.153
0.098
0.075
0.075
0.057
0.057
0.040
0.044
0.032
0.024
0.029
0.029
0.032
0.023
0.020
0.022
0.020
0.024
0.020
0.019
0.022
0.019
0.018
0.022
0.017
0.017
0.019
501
732
953
953
1140
1140
1820
1930
2400
3100
2490
2560
2280
2970
3160
3200
3600
3100
3160
3590
3200
3590
3410
3500
4300
4200
4000
G3
H3
H4
H4
H5
H5
Ⅰ5
J4
Ⅰ6
J6
K5
Ⅰ7
J5
Ⅰ8
J7
K6
Ⅰ9
J6
J7
J8
K6
J8
K7
L6
J9
K8
L7
-
-
-
18×40
20×35.5
K9
L8
0.016
0.016
4600
4700
20×40
L9
0.015
5100
-
-
-
-
-
-
-
-
Rated ripple
current
Case
( Ω max.)
(mArms)
φD × L (mm)
Casing
symbol
-
0.19
0.11
0.094
0.062
0.051
-
-
-
1200
1530
1640
2180
2470
-
-
80
Casing
symbol
ESR
100
16×20
16×25
16×35.5
16×40
18×40
-
-
-
J5
J6
J8
J9
K9
-
-
-
ESR
Rated ripple
current
( Ω max.)
(mArms)
0.22
0.12
0.077
0.069
0.059
-
-
-
1100
1500
2000
2200
2330
-
-
-
(Note) Rated ripple current : 125℃ , 100kHz ; ESR : 20℃ , 100kHz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
RKB
MINIATURE
MINIATUREALUMINUM
ALUMINUMELECTROLYTIC
ELECTROLYTICCAPACITORS
CAPACITORS
GREEN
CAP
135°C Use, Miniature, Low ESR Capacitors
●
●
Low
ESR
135˚C
3000hours
®
Anticleaning
solvent
High temperature guaranteed and low ESR series for automotive.
Guarantees 3000 hours at 135℃.
(φ10, 63V to 100V : 2000 hours)
RKB
High temperature
RKD
Marking color : Black print
Specifications
Item
Performance
Category temperature range (℃)
ー40 to +135
Tolerance at rated capacitance (%)
±20
Leakage current (µA)
(max.)
0.01CV or 3 whichever is larger (after 2 minutes) C : Rated capacitance (µF), V : Rated voltage (V)
Rated voltage (V)
tanδ (max.)
Tangent of loss angle
(tanδ)
10
0.20
16
0.16
(20℃,120Hz)
35
0.12
25
0.14
50
0.10
(20℃)
63
0.10
80
0.08
(20℃,120Hz)
0.02 is added to every 1000µF increase over 1000µF.
Rated voltage (V)
Impedance ratio (max.)
Z−40℃/Z+20℃
Characteristics at high
and low temperature
10
4
16
3
35
3
25
3
50
3
63
3
80
3
100
3
(120Hz)
10V to 50V :3000 hours (φ10:2000 hours)
63V to 100V :2000 hours
The initial specified value or less
Within ±30% of initial value
300% or less of the initial specified value
Test time
Endurance (135℃)
(Applied ripple current)
Leakage current
Percentage of capacitance change
Tangent of the loss angle
Shelf life (135℃)
Test time : 1000hours ; other items are same as the endurance. Voltage application treatment : According to JIS C5101-4 4.1
Applicable standards
JIS C5101 - 1,- 4 (IEC 60384 - 1,- 4)
Outline Drawing
Unit : mm
φd±0.05 copper plated steel wire (tinned)
Reasin covered
F±0.5
φD±0.5
Vent
100
0.08
L+α max.
φD
F
φd
α
15min.
10
5.0
0.6
2.0
12.5
5.0
0.6
2.0
5
min.
16
7.5
0.8
2.0
Coefficient of Frequency for Rated Ripple Current
Frequency (Hz)
Rated
capacitance (µF)
220 to 330
470 to 1000
1200 to 6800
50・60
120
1k
0.55
0.70
0.80
0.65
0.75
0.85
0.85
0.90
0.95
10k・100k
1
1
1
Part numbering system (example : 10V1000µF)
18
7.5
0.8
2.0
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
RKB
Series code
̶
10
Rated voltage
symbol
V
102
M
Rated capacitance
symbol
Capacitance
tolerance symbol
H5 # ̶
Casing
symbol
Taping(Forming)
symbol
CAT.No.2021/2022E
RKB
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS
Standard Ratings
10
Rated voltage (V)
Rated
capacitance
(µF)
Item
220
φD × L (mm)
Casing
symbol
ESR
( Ω max.)
—
—
—
Case
Rated ripple
current
16
Case
(mArms) φD × L (mm)
—
10×12.5
Casing
symbol
ESR
( Ω max.)
H3
0.098
Rated ripple
current
725
10×12.5
H3
0.098
725
10×12.5
H3
0.098
725
470
10×12.5
H3
0.098
725
10×16
H4
0.075
951
0.098
725
10×12.5
H3
0.098
725
10×16
H4
0.075
10×12.5
H3
0.098
951
725
10×16
H4
0.075
10×16
H4
0.075
951
951
10×20
H5
0.057
1130
10×16
H4
0.075
951
10×20
H5
0.057
1130
H5
0.057
1130
12.5×20
Ⅰ5
0.040
1550
12.5×25
Ⅰ6
0.032
1880
12.5×30
Ⅰ7
0.029
2160
16×20
J5
0.032
2020
2580
H5
0.057
1130
10×20
H5
0.057
1130
12.5×20
Ⅰ5
0.040
1550
0.059
1130
12.5×20
Ⅰ5
0.040
1550
12.5×25
Ⅰ6
0.032
1880
12.5×20
Ⅰ5
0.040
1550
—
—
—
—
—
—
1500
—
—
—
—
—
—
—
—
—
—
—
—
12.5×25
Ⅰ6
0.032
1880
16×20
J5
0.032
2020
—
—
—
—
12.5×35
Ⅰ8
0.023
12.5×25
—
Ⅰ6
0.032
1880
12.5×40
Ⅰ9
0.020
2920
16×20
J5
0.032
2020
16×25
J6
0.024
2550
—
—
12.5×25
Ⅰ6
0.032
1880
12.5×30
Ⅰ7
0.029
2160
16×31.5
J7
0.020
3040
16×25
J6
0.024
2550
16×25
J6
0.024
2550
16×35.5
J8
0.019
3280
12.5×35
Ⅰ8
0.023
2580
16×35.5
J8
0.019
3280
16×25
J6
0.024
2550
18×31.5
K7
0.018
3410
12.5×40
Ⅰ9
0.020
2920
16×40
J9
0.017
3630
18×35.5
K8
0.017
3710
18×40
K9
0.016
4000
—
—
—
—
16×25
J6
0.024
2550
18×20
K5
0.029
16×31.5
J7
0.020
18×25
K6
0.022
2880
5600
—
—
—
—
6800
—
—
—
—
Case
φD × L (mm)
Casing
symbol
ESR
( Ω max.)
Rated ripple
current
220
10×20
H5
0.081
930
-
-
-
-
-
-
-
330
-
-
-
-
-
-
-
-
16×20
J5
0.19
Ⅰ5
0.057
1170
16×20
J5
0.19
1100
16×25
J6
0.11
1370
16×35.5
-
-
-
-
-
-
-
18×25
K6
0.094
1450
16×40
Ⅰ7
0.038
1680
J7
0.080
1790
18×35.5
K8
0.062
2100
18×40
K9
3300
4700
50
Rated voltage (V)
Rated
capacitance
(µF)
470
560
820
Item
12.5×20
-
12.5×30
—
—
(mArms)
10×20
Ⅰ4
—
2700
H3
Rated ripple
current
ESR
( Ω max.)
Case
(mArms) φD × L (mm)
10×20
—
2200
10×12.5
35
Casing
symbol
12.5×15
1200
1800
Rated ripple
current
ESR
( Ω max.)
(mArms) φD × L (mm)
330
1000
25
Casing
symbol
Case
—
—
—
16×31.5
J7
0.020
3040
2320
18×25
K6
0.022
2880
16×31.5
J7
0.020
3040
3040
16×35.5
J8
0.019
3280
16×35.5
J8
0.019
3280
18×31.5
K7
0.018
3410
18×31.5
K7
0.018
3410
—
—
—
—
16×40
J9
0.017
3630
—
—
—
—
—
—
—
—
18×40
K9
0.016
4000
—
—
—
—
Case
Casing
symbol
ESR
( Ω max.)
Rated ripple
current
Case
Casing
symbol
Rated ripple
current
Case
Casing
symbol
63
(mArms) φD × L (mm)
16×31.5
80
(mArms) φD × L (mm)
ESR
( Ω max.)
(mArms) φD × L (mm)
100
ESR
( Ω max.)
Rated ripple
current
(mArms)
-
16×20
J5
0.22
1010
1100
16×25
J6
0.12
1220
J8
0.077
1860
J9
0.069
2100
0.059
2290
1000
16×25
J6
0.031
1710
16×35.5
J8
0.066
2010
18×40
K9
0.051
2350
-
-
-
-
1800
18×35.5
K7
0.025
2670
18×40
K9
0.051
2350
-
-
-
-
-
-
-
-
2200
18×35.5
K8
0.022
2900
-
-
-
-
-
-
-
-
-
-
-
-
(Note) Rated ripple current : 135℃ , 100kHz ; ESR : 20℃ , 100kHz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
RKC
®
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS
135°C Use, High CV, Low ESR Capacitors
High temperature guaranteed for automotive.
Guaranteed 3000 hours at 135℃.
(63V to 100V : 2000 hours)
High CV, high ripple current.
For ECU of Direct injection engine, ESP etc.
GREEN
CAP
Low
ESR
135˚C
3000hours
Anticleaning
solvent
●
●
RKC
●
●
High CV
High ripple
RKB
Marking color : Black print
Specifications
Item
Performance
Category temperature range (℃)
ー40 to +135
Tolerance at rated capacitance (%)
±20
Leakage current (µA)
(max.)
0.01CV or 3 whichever is larger (after 2 minutes) C : Rated capacitance (µF), V : Rated voltage (V)
Rated voltage (V)
tanδ (max.)
Tangent of loss angle
(tanδ)
25
0.14
(20℃,120Hz)
35
0.12
63
0.10
50
0.10
(20℃)
100
0.08
80
0.08
(20℃,120Hz)
0.02 is added to every 1000µF increase over 1000µF.
Rated voltage (V)
Impedance ratio (max.)
Z−40℃/Z+20℃
Characteristics at high
and low temperature
35
3
25
3
63
3
50
3
100
3
80
3
(120Hz)
Endurance 1 (135℃)
(Applied ripple current)
Test time
Leakage current
Percentage of capacitance change
Tangent of the loss angle
3000 hours (63V to 100V : 2000 hours)
The initial specified value or less
Within ±30% of initial value
300% or less of the initial specified value
Endurance 2 (135℃)
(Applied ripple current)
Test time
Leakage current
Percentage of capacitance change
Tangent of the loss angle
3000 hours (63V to 100V : 2000 hours)
The initial specified value or less
Within ±30% of initial value
300% or less of the initial specified value
Shelf life (135℃)
Test time : 1000hours ; other items are same as the endurance. Voltage application treatment : According to JIS C5101-4 4.1
Applicable standards
JIS C5101 - 1,- 4 (IEC 60384 - 1,- 4)
Outline Drawing
φd±0.05 copper plated steel wire (tinned)
Reasin covered
F±0.5
φD±0.5
Vent
Unit : mm
L+α max.
φD
F
φd
α
15min.
12.5
5.0
0.6
2.0
16
7.5
0.8
2.0
5
min.
18
7.5
0.8
2.0
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
Coefficient of Frequency for Rated Ripple Current
Frequency (Hz)
Rated
capacitance (µF)
160 to 360
390 to 1000
1100 to 12000
50・60
120
1k
0.55
0.70
0.80
0.65
0.75
0.85
0.85
0.90
0.95
10k・100k
1
1
1
Part numbering system (example : 25V2000µF)
RKC
Series code
̶
25
Rated voltage
symbol
V
202
M
Rated capacitance
symbol
Capacitance
tolerance symbol
Ⅰ5 # ̶
Casing
symbol
Taping(Forming)
symbol
CAT.No.2021/2022E
RKC
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS
Standard Ratings
Rated voltage (V)
Item
Rated
capacitance
(µF)
25
Case
φD × L (mm)
Casing
symbol
35
ESR
Rated ripple current
(Ω max. / 100kHz) (mArms / 100kHz)
Case
Casing
symbol
50
ESR
Rated ripple current
(Ω max. / 100kHz) (mArms / 100kHz)
Case
φD × L (mm)
ESR
Rated ripple current
Casing (Ω max. / 100kHz) (mArms / 100kHz)
symbol
20℃
-40℃
135℃
125℃
φD × L (mm)
20℃
-40℃
135℃
125℃
20℃
-40℃
135℃
620
—
—
—
—
—
—
—
—
—
—
—
—
12.5 × 20
Ⅰ5
0.073
0.88
1470
2400
820
—
—
—
—
—
—
—
—
—
—
—
—
12.5 × 25
Ⅰ6
0.058
0.67
2260
3350
125℃
1000
—
—
—
—
—
—
—
—
—
—
—
—
16 × 20
J5
0.050
0.55
1870
2960
1100
—
—
—
—
—
—
—
—
—
—
—
—
12.5 × 30
Ⅰ7
0.048
0.52
2520
4220
12.5 × 35
Ⅰ8
0.042
0.44
2780
4810
16 × 25
J6
0.042
0.44
2500
4040
1300
—
—
—
—
—
—
1600
—
—
—
—
—
—
1800
—
—
—
—
—
—
Ⅰ5
0.042
0.48
1690
2760
—
—
—
—
—
2000
2200
12.5 × 20
—
12.5 × 20
Ⅰ5
0.042
0.48
1690
2760
—
—
—
—
—
Ⅰ6
0.033
0.30
2010
3480
16 × 20
J5
0.035
0.27
2160
3040
12.5 × 30
Ⅰ7
0.028
0.24
2900
4490
—
12.5 × 25
18 × 20
K5
0.042
0.44
2110
3130
12.5 × 40
Ⅰ9
0.037
0.36
3020
5240
16 × 31.5
J7
0.035
0.36
2960
5130
18 × 25
K6
0.033
0.32
2530
4230
—
—
—
—
—
16 × 35.5
—
J8
0.029
0.27
3160
5480
2400
—
—
—
—
—
—
18 × 20
K5
0.034
0.22
2320
3250
18 × 31.5
K7
0.028
0.25
3020
5240
2700
—
—
—
—
—
—
12.5 × 35
Ⅰ8
0.025
0.21
3190
5140
16 × 40
J9
0.025
0.22
3420
5930
18 × 35.5
5870
3000
12.5 × 25
Ⅰ6
0.033
0.30
2010
3480
16 × 25
J6
0.028
0.22
2870
4260
K8
0.024
0.20
3390
3300
16 × 20
J5
0.035
0.27
2160
3040
12.5 × 40
Ⅰ9
0.024
0.19
3470
5810
—
—
—
—
—
—
3600
12.5 × 30
Ⅰ7
0.028
0.24
2900
4490
16 × 31.5
J7
0.023
0.18
3400
5480
18 × 40
K9
0.023
0.16
3700
6420
3900
—
—
—
—
—
—
4300
18 × 20
K5
0.034
0.22
2320
3250
12.5 × 35
Ⅰ8
0.025
0.21
3190
5140
16 × 25
J6
0.028
0.22
2870
4260
12.5 × 40
Ⅰ9
0.024
0.19
3470
5810
—
—
—
—
J7
0.023
0.18
3400
5480
16 × 40
J9
0.019
0.12
18 × 35.5
K8
0.019
0.12
3750
6280
—
—
—
—
—
—
18 × 40
K9
0.018
0.10
4080
7070
—
—
—
—
—
—
4700
5100
5600
6200
7500
16 × 31.5
—
—
—
—
—
16 × 35.5
—
J8
0.020
0.14
3630
6070
5600
18 × 25
K6
0.027
0.19
2900
4500
—
—
—
—
—
—
16 × 35.5
J8
0.020
0.14
3630
6070
—
—
—
—
—
—
18 × 31.5
K7
0.022
0.16
3470
5600
—
—
—
—
—
—
—
—
—
—
—
—
—
—
3930
6810
—
—
—
—
—
—
18 × 31.5
K7
0.022
0.16
3470
9100
16 × 40
J9
0.019
0.12
3930
6810
—
—
—
—
—
—
—
—
—
—
—
—
10000
18 × 35.5
K8
0.019
0.12
3750
6280
—
—
—
—
—
—
—
—
—
—
—
—
12000
18 × 40
K9
0.018
0.10
4080
7070
—
—
—
—
—
—
—
—
—
—
—
—
Rated voltage (V)
Item
Rated
capacitance
(µF)
63
Case
Rated ripple current
Case
100
ESR
Rated ripple current
Casing (Ω max. / 100kHz) (mArms / 100kHz)
symbol
Case
Rated ripple current
20℃
-40℃
135℃
125℃
φD × L (mm)
20℃
-40℃
135℃
125℃
20℃
-40℃
135℃
125℃
—
—
—
—
—
—
—
—
—
—
—
—
12.5 × 20
Ⅰ5
0.090
0.75
1410
1580
220
—
—
—
—
—
—
—
—
—
—
—
—
12.5 × 25
Ⅰ6
0.068
0.55
1960
2140
270
—
—
—
—
—
—
Ⅰ5
0.072
0.56
1420
1640
16 × 20
J5
0.067
0.47
1670
2050
300
—
—
—
—
—
—
—
—
—
—
—
360
—
12.5 × 20
—
—
—
—
—
Ⅰ5
0.072
0.56
1420
1640
12.5 × 20
—
—
12.5 × 25
—
—
—
—
—
Ⅰ6
0.052
0.39
2050
2520
φD × L (mm)
ESR
Casing (Ω max. / 100kHz) (mArms / 100kHz)
symbol
160
390
φD × L (mm)
80
ESR
Casing (Ω max. / 100kHz) (mArms / 100kHz)
symbol
12.5 × 30
Ⅰ7
0.052
0.41
2330
2950
12.5 × 35
Ⅰ8
0.045
0.35
2630
3530
18 × 20
K5
0.061
0.35
1860
2270
16 × 25
J6
0.048
0.33
2360
2790
12.5 × 40
430
—
—
—
—
—
—
—
—
—
—
—
—
Ⅰ9
0.038
0.29
2920
4140
470
—
—
—
—
—
—
16 × 20
J5
0.053
0.34
1910
2140
16 × 31.5
J7
0.041
0.27
2720
3440
12.5 × 30
Ⅰ7
0.042
0.30
2630
3110
18 × 25
K6
0.045
0.25
2470
2920
—
—
—
—
—
16 × 35.5
J8
0.036
0.23
2960
4190
12.5 × 35
Ⅰ8
0.035
0.25
2970
3760
18 × 20
K5
0.044
0.26
2100
2350
18 × 31.5
K7
0.037
0.2
2920
3920
16 × 25
J6
0.038
0.23
2680
2940
12.5 × 40
Ⅰ9
0.031
0.22
3260
4610
510
560
620
—
12.5 × 25
—
—
—
—
—
—
Ⅰ6
0.052
0.39
2050
2520
—
—
—
—
—
680
16 × 20
J5
0.053
0.34
1910
2140
750
12.5 × 30
Ⅰ7
0.042
0.30
2630
3110
—
—
—
—
—
12.5 × 35
Ⅰ8
0.035
0.25
2970
3760
18 × 20
K5
0.044
0.26
2100
2350
820
910
—
—
16 × 31.5
J7
0.034
0.20
3050
3860
18 × 25
K6
0.033
0.19
2810
3080
—
—
—
—
—
—
—
—
—
—
—
—
16 × 40
J9
0.028
0.18
3380
5020
18 × 35.5
K8
0.030
0.16
3330
4710
18 × 40
K9
0.026
0.14
3560
5280
1000
16 × 25
J6
0.038
0.23
2680
2940
16 × 35.5
J8
0.027
0.15
3420
4590
—
—
—
—
—
—
1100
12.5 × 40
Ⅰ9
0.031
0.22
3260
4610
18 × 31.5
K7
0.028
0.15
3220
4080
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
1200
16 × 31.5
J7
0.034
0.20
3050
3860
1300
18 × 25
K6
0.033
0.19
2810
3080
16 × 35.5
J8
0.027
0.15
3420
4590
18 × 31.5
K7
0.028
0.15
3220
4080
1600
—
—
—
—
—
—
16 × 40
J9
0.025
0.14
3670
5190
18 × 35.5
K8
0.022
0.12
3690
5220
18 × 40
K9
0.021
0.11
3820
5660
1800
16 × 40
J9
0.025
0.14
3670
5190
—
—
—
—
—
—
—
—
—
—
—
—
2200
18 × 35.5
K8
0.022
0.12
3690
5220
—
—
—
—
—
—
—
—
—
—
—
—
2400
18 × 40
K9
0.021
0.11
3820
5660
—
—
—
—
—
—
—
—
—
—
—
—
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
RQA
RQA
MINIATURE
MINIATUREALUMINUM
ALUMINUMELECTROLYTIC
ELECTROLYTICCAPACITORS
CAPACITORS
GREEN
CAP
150°C Miniature Capacitors
●
●
Low
150˚C
Impedance 1000hours
150℃, High temperature guaranteed.
Guarantees 1000 hours at 150℃.
®
Anticleaning
solvent
RQA
High temperature
RKB
Marking color : Black print
Specifications
Item
Performance
Category temperature range (℃)
ー40 to +150
Tolerance at rated capacitance (%)
±20
Leakage current (µA)
(max.)
0.01CV or 3 whichever is larger (after 2 minutes) C : Rated capacitance (µF), V : Rated voltage (V)
Tangent of loss angle
(tanδ)
(20℃,120Hz)
(20℃)
Rated voltage (V)
10
16
25
35
50
63
tanδ (max.)
0.20
0.16
0.14
0.12
0.10
0.10
(20℃,120Hz)
0.02 is added to every 1000µF increase over 1000µF.
Rated voltage (V)
Characteristics at high
and low temperature
Impedance ratio (max.)
Z−40℃/Z+20℃
10
16
25
35
50
63
4
3
3
3
3
3
(120Hz)
1000 hours
Test time
The initial specified value or less
Leakage current
Endurance (150℃)
(Applied ripple current)
Within ±30% of initial value
Percentage of capacitance change
300% or less of the initial specified value
Tangent of the loss angle
Shelf life (150℃)
Test time : 1000hours ; other items are same as the endurance. Voltage application treatment : According to JIS C5101-4 4.1
Applicable standards
JIS C5101 - 1,- 4 (IEC 60384 - 1,- 4)
Outline Drawing
φd±0.05 copper plated steel wire (tinned)
Reasin covered
Coefficient of Frequency for Rated Ripple Current
Frequency (Hz)
Rated
capacitance (µF)
220 to 330
470 to 1000
1500 to 4700
50・60
120
1k
0.55
0.70
0.80
0.65
0.75
0.85
0.85
0.90
0.95
10k・100k
1
1
1
F±0.5
φD±0.5
Vent
Unit : mm
L+α max.
15min.
Part numbering system (example : 35V1000µF)
5
min.
RQA
̶
Series code
φD
F
φd
α
10
5.0
0.6
2.0
12.5
5.0
0.6
2.0
16
7.5
0.8
2.0
35
V
Rated voltage
symbol
18
7.5
0.8
2.0
102
M
Rated capacitance
symbol
Capacitance
tolerance symbol
Ⅰ6 # ̶
Taping(Forming)
symbol
Casing
symbol
Standard Ratings
10
Rated voltage (V)
Rated
capacitance
(µF)
Item
Case
φD×L (mm)
—
—
—
10×22
12.5×26
16×26.5
16×33
220
330
470
1000
2200
3300
4700
470
1000
1500
2200
Item
—
—
—
H5
Ⅰ6
J6
J7
16
Rated ripple current
Case
(mArms)
—
—
—
820
1000
1200
1370
φD×L (mm)
—
—
10×18
10×22
12.5×26
16×33
16×37
Rated ripple current
Case
(mArms)
1070
1250
1500
1700
φD×L (mm)
16×26.5
18×34
18×42.5
—
Casing
symbol
—
—
H4
H5
Ⅰ6
J7
J8
50
Rated voltage (V)
Rated
capacitance
(µF)
Casing
symbol
Case
φD×L (mm)
12.5×21
16×33
18×34
18×38
Casing
symbol
Ⅰ5
J7
K7
K8
25
Rated ripple current
Case
(mArms)
—
—
510
820
1000
1370
1720
φD×L (mm)
10×14.5
10×18
10×22
12.5×26
16×26.5
16×37
18×38
Casing
symbol
H3
H4
H5
Ⅰ6
J6
J8
K8
35
Rated ripple current
Case
(mArms)
300
510
820
1000
1200
1720
1790
φD×L (mm)
10×14.5
10×18
10×22
12.5×26
16×33
18×34
18×42.5
Casing
symbol
H3
H4
H5
Ⅰ6
J7
K7
K9
Rated ripple current
(mArms)
300
510
820
1000
1370
1670
1870
63
Casing
symbol
J6
K7
K9
—
Rated ripple current
(mArms)
750
1200
1550
—
(Note) Rated ripple current : 150℃ , 100kHz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
RQB
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS
150°C Miniature Capacitors
GREEN
CAP
LOW
ESR
150℃
2000hours
Anticleaning
solvent
150℃, High temperature guaranteed.
Guaranteed 2000 hours at 150℃.
(63V to 80V : 1000 hours)
●
RQB
●
High ripple
Long life
RQA
Marking color : Black print
Specifications
Item
Performance
ー 40 to + 150
± 20
Category temperature range (℃ )
Tolerance at rated capacitance (%)
Leakage current (µA)
(max.)
Rated voltage (V)
tanδ (max.)
Tangent of loss angle
(tanδ)
35
0.12
63
0.10
80
0.08
35
3
50
3
63
3
80
3
(120Hz)
Test time
Leakage current
Percentage of capacitance change
Tangent of the loss angle
Endurance (105℃ )
(Applied ripple current)
Shelf life (150℃ )
Applicable standards
2000 hours (63V to 80V : 1000 hours)
The initial specified value or less
Within ± 30% of initial value
300% or less of the initial specified value
Test time : 1000hours ; other items are same as the endurance. Voltage application treatment : According to JIS C5101-4 4.1
JIS C5101-1,-4(IEC 60384-1,-4)
Outline Drawing
Unit : mm
φd±0.05 copper plated steel wire (tinned)
Reasin covered
L+α max.
15min.
φD
F
φd
α
16
7.5
0.8
2.0
Coefficient of Frequency for Rated Ripple Current
Frequency (Hz)
Rated
capacitance (µF)
320
420 to 940
1300 to 4700
F±0.5
φD±0.5
Vent
50
0.10
0.02 is added to every 1000µF increase over 1000µF
(20℃ , 120Hz)
Rated voltage (V)
Impedance ratio (max.)
Z− 40℃ / Z+ 20℃
Characteristics at high
and low temperature
(20℃ , 120Hz)
0.01CV or 3 whichever is larger (after 2 minutes) C : Rated capacitance (µF) ; V: Rated voltage (V)
(20℃)
5
min.
120
1k
10k
100k
0.65
0.75
0.85
0.85
0.90
0.95
1.00
1.00
1.00
1
1
1
Part numbering system (example : 35V2200µF)
RQB
18
7.5
0.8
2.0
—
Series code
35
V
Rated voltage
symbol
222
M
J6
Rated
capacitance
symbol
Capacitance
tolerance
symbol
Casing
symbol
# —
Taping (Forming)
symbol
Standard Ratings
35
Rated voltage (V)
Case size
φD×L(mm)
Casing
symbol
Rated
Item capacitance
(µF)
50
ESR(Ω max.)
Rated ripple
current
Rated
capacitance
63
ESR(Ω max.)
Rated ripple
current
Rated
capacitance
ESR(Ω max.)
Rated ripple
current
20℃
- 40℃
(mArms)
(µF)
20℃
- 40℃
(mArms)
(µF)
20℃
- 40℃
16 × 26.5
J6
2200
0.038
0.380
1800
1300
0.040
0.400
1800
520
0.083
0.830
1200
16 × 33
J7
2700
0.032
0.320
2200
1800
0.038
0.380
2200
680
0.068
0.680
1500
16 × 37
J8
3000
0.030
0.300
2600
2000
0.032
0.320
2600
800
0.054
0.540
1800
16 × 41.5
J9
3600
0.027
0.270
3000
2400
0.029
0.290
3000
910
0.044
0.440
2100
18 × 27.5
K6
2400
0.036
0.360
2200
1800
0.034
0.340
2200
720
0.068
0.680
1400
18 × 34
K7
3300
0.028
0.280
2800
2400
0.030
0.300
2700
940
0.049
0.490
1700
18 × 42.5
K9
4700
0.023
0.230
3600
3000
0.023
0.230
3700
1300
0.033
0.330
2300
80
Rated voltage (V)
Case size
φD×L(mm)
Casing
symbol
(mArms)
Rated
Item capacitance
(µF)
ESR(Ω max.)
20℃
- 40℃
Rated ripple
current
(mArms)
16 × 26.5
J6
320
0.083
0.830
1200
16 × 33
J7
420
0.068
0.680
1500
1800
16 × 37
J8
500
0.054
0.540
16 × 41.5
J9
560
0.044
0.440
2100
18 × 27.5
K6
420
0.068
0.680
1400
18 × 34
K7
560
0.049
0.490
1700
18 × 42.5
K9
880
0.033
0.330
2300
(Note) Rated ripple current : 150℃ , 100kHz ; ESR : 100kHz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS
For Vibration, Resistance,
AAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
Miniature Aluminum Electrolytic Capacitors
CAT.No.2021/2022
RPK
MINIATURE
MINIATUREALUMINUM
ALUMINUMELECTROLYTIC
ELECTROLYTICCAPACITORS
CAPACITORS
125°C Use, Long Life Capacitors
●
●
●
GREEN
CAP
Low
ESR
Vibration
Resistance
125˚C
5000hours
®
Anticleaning
solvent
Guarantees 5000 hours at 125℃. (4000 hours: 63V to 100V - φ16x20L)
Best-suited to smoothing circuits and control circuits for industrial equipment
power supplies of which long life and high reliability are required.
NC terminal added items are lineup for vibration resistance.
(30G guaranteed : 20mmL or less)
For vibration
RKD
RPK
Marking color : White print on a black sleeve
Specifications
Item
Performance
Category temperature range (℃)
−40 to +125
Tolerance at rated capacitance (%)
±20
Leakage current (µA)
(max.)
0.01CV or 3 whichever is larger (after 2 minutes) C : Rated capacitance (µF) , V : Rated voltage (V)
Tangent of loss angle
(tanδ)
(20℃,120Hz)
(20℃)
Rated voltage (V)
10
16
25
35
50
63
80
100
tanδ (max.)
0.20
0.16
0.14
0.12
0.10
0.10
0.08
0.08
0.02 is added to every 1000µF increase over 1000µF.
Rated voltage (V)
Characteristics at high
and low temperature
(20℃,120Hz)
10
16
25
35
50
63
80
100
4
3
3
3
3
3
3
3
Z−40℃/Z+20℃
Impedance ratio (max.)
(120Hz)
5000 hours (4000 hours: 63V to 100V - φ16x20L)
Test time
The initial specified value or less
Leakage current
Endurance (125℃)
(Applied ripple current)
Within ±30% of initial value
Percentage of capacitance change
300% or less of the initial specified value
Tangent of the loss angle
Shelf life (125℃)
Test time : 1000hours ; other items are same as the endurance. Voltage application treatment : According to JIS C5101-4 4.1
Applicable standards
JIS C5101 - 1,- 4 (IEC 60384 - 1,- 4)
Outline Drawing
φd±0.05 copper plated steel wire (tinned)
Sleeve
φD+0.5/0
Vent
Unit : mm
L+α max.
φD
F
F1
φd
α
12.5
5.0
2.5
0.8
2.0
15min
16
7.5
3.75
0.8
2.0
F±0.5
NC
18
7.5
3.75
0.8
2.0
Frequency (Hz)
Rated
capacitance (µF)
220 to 330
390 to 1000
1200 to 8200
50・60
120
1k
10k・100k
0.55
0.70
0.80
0.65
0.75
0.85
0.85
0.90
0.95
1
1
1
Part numbering system (example : 16V2200µF)
F1±0.5
5
min.
Coefficient of Frequency for Rated Ripple Current
20
10.0
5.0
1.0
2.0
RPK ̶
Series code
16
Rated voltage
symbol
V
222
M
Rated capacitance Capacitance
symbol
tolerance symbol
J6
Casing
symbol
D# ̶
Taping(Forming)
symbol
If it is whisker preventive structure, should change“#”into“G”
.
(Note) Since NC terminal is not insulated, it should
be mounted at a position electronically
independent from all other parts of the circuit.
(Note) Whisker preventive structure is possible.
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
RPK
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS
Standard Ratings
Rated voltage
(V)
Item
Rated
capacitance
(µF)
470
1000
10
Case
φD × L (mm)
-
12.5×15
Casing
symbol
-
16
ESR
Rated ripple
current
Case
( Ω max.)
(mArms)
φD × L (mm)
-
-
-
Ⅰ4
0.059
1380
Casing
symbol
25
ESR
Rated ripple
current
Case
φD × L (mm)
( Ω max.)
(mArms)
-
-
-
12.5×20
Ⅰ5
0.040
1820
16×16
J4
0.044
( Ω max.)
(mArms)
φD × L (mm)
1930
-
0.040
0.032
0.044
-
1820
2400
1930
12.5×20
Ⅰ5
0.040
1820
-
-
-
12.5×25
16×20
12.5×30
16×25
18×20
12.5×35
16×25
18×20
Ⅰ6
J5
Ⅰ7
J6
K5
Ⅰ8
J6
K5
0.032
0.032
0.029
0.024
0.029
0.023
0.024
0.029
2400
2280
2560
3100
2490
2970
3100
2490
12.5×40
12.5×20
12.5×25
16×25
18×20
12.5×30
16×20
12.5×35
16×31.5
18×25
12.5×40
16×25
16×31.5
16×35.5
18×25
16×35.5
18×31.5
20×25
16×40
18×35.5
20×30
-
-
-
-
-
-
-
1500
-
-
-
-
-
-
-
-
1800
-
-
-
-
-
-
-
-
Ⅰ6
J5
K4
0.032
0.032
0.041
2400
2280
2170
Ⅰ6
J6
K5
0.032
0.024
0.029
2400
3100
2490
-
-
-
-
-
-
2700
3300
3900
4700
-
12.5×25
16×25
18×20
-
16×25
J6
0.024
3100
16×31.5
J7
0.020
3160
18×20
K5
0.029
2490
18×25
K6
0.022
3200
-
-
-
-
-
-
-
-
J7
K6
0.020
0.022
3160
3200
J8
K7
0.019
0.018
3590
3410
16×31.5
18×25
16×35.5
18×31.5
-
Ⅰ9
0.020
3600
16×31.5
J7
0.020
3160
16×35.5
18×25
18×35.5
20×25
16×40
18×35.5
20×30
18×40
20×35.5
20×40
J8
K6
K8
L6
J9
K8
L7
K9
L8
L9
0.019
0.022
0.017
0.022
0.017
0.017
0.019
0.016
0.016
0.015
3590
3200
4200
3500
4300
4200
4000
4600
4700
5100
ESR
5600
-
-
-
-
-
-
-
-
6800
-
-
-
-
-
-
-
-
8200
-
-
-
-
-
-
-
-
Case
Casing
symbol
ESR
Rated ripple
current
Case
ESR
Rated ripple
current
Case
( Ω max.)
(mArms)
φD × L (mm)
Casing
symbol
( Ω max.)
(mArms)
φD × L (mm)
-
-
0.070
-
0.038
0.031
0.025
0.022
-
-
1500
-
2150
2620
3140
3510
-
-
-
-
0.080
0.066
-
-
-
-
-
-
1910
2110
-
-
Rated voltage
(V)
Item
Rated
capacitance
(µF)
220
330
470
560
820
1000
1800
2200
50
φD × L (mm)
-
-
12.5×20
-
12.5×30
16×25
18×31.5
18×35.5
-
-
Ⅰ5
-
Ⅰ7
J6
K7
K8
63
-
-
-
-
16×31.5
16×35.5
-
-
-
-
-
-
J7
J8
-
-
Case
-
Ⅰ5
Ⅰ6
J4
-
12.5×25
16×20
18×16
Rated ripple
current
-
12.5×20
12.5×25
16×16
1200
2200
Casing
symbol
35
ESR
-
Casing
symbol
-
-
16×25
18×25
18×35.5
18×40
-
-
-
-
J6
K6
K8
K9
-
-
Rated ripple
current
( Ω max.)
(mArms)
0.040
0.032
0.024
0.029
0.029
0.032
0.023
0.020
0.022
0.020
0.024
0.020
0.019
0.022
0.019
0.018
0.022
0.017
0.017
0.019
1820
2400
3100
2490
2560
2280
2970
3160
3200
3600
3100
3160
3590
3200
3590
3410
3500
4300
4200
4000
Ⅰ5
Ⅰ6
J6
K5
Ⅰ7
J5
Ⅰ8
J7
K6
Ⅰ9
J6
J7
J8
K6
J8
K7
L6
J9
K8
L7
-
-
-
18×40
20×35.5
K9
L8
0.016
0.016
4600
4700
20×40
L9
0.015
5100
-
-
-
-
-
-
-
-
Rated ripple
current
Case
( Ω max.)
(mArms)
φD × L (mm)
Casing
symbol
-
-
0.116
0.100
0.062
0.051
-
-
-
-
1500
1600
2180
2470
-
-
80
Casing
symbol
ESR
100
16×20
16×25
16×35.5
16×40
18×40
-
-
-
J5
J6
J8
J9
K9
-
-
-
ESR
Rated ripple
current
( Ω max.)
(mArms)
0.220
0.127
0.077
0.069
0.059
-
-
-
1100
1460
2000
2200
2330
-
-
-
(Note) Rated ripple current : 125℃ , 100kHz ; ESR : 20℃ , 100kHz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
RKE
MINIATURE
CAPACITORS
MINIATUREALUMINUM
ALUMINUMELECTROLYTIC
ELECTROLYTIC
CAPACITORS
®
125˚C Use, Miniature, Low ESR, High Vibration Resistance Capacitors
●
●
●
GREEN
CAP
High
Vibration
Resistance
Low
ESR
125˚C
5000hours
Anticleaning
solvent
Vibration resistance (40G,10 to 2000Hz, X,Y,Z = per 2hours).
For Automotive application (ABS and electric power steering etc.)
Guaranteed 5000 hours at 125˚C
High vibration
resistance
RKE
RKD
Marking color : Black print
Specifications
Item
Performance
Category temperature range (℃)
ー40 to +125
Tolerance at rated capacitance (%)
±20
Leakage current (µA)
(max.)
0.01CV or 3 whichever is larger (after 2 minutes) C : Rated capacitance (µF), V : Rated voltage (V)
Tangent of loss angle
(tanδ)
(20℃,120Hz)
(20℃)
Rated voltage (V)
25
35
50
tanδ (max.)
0.14
0.12
0.10
(20℃,120Hz)
0.02 is added to every 1000µF increase over 1000µF.
Rated voltage (V)
Characteristics at high
and low temperature
Impedance ratio (max.)
Z−40℃/Z+20℃
25
35
50
3
3
3
(120Hz)
Test time
5000 hours
Leakage current
Endurance (125℃)
(Applied ripple current)
The initial specified value or less
Percentage of capacitance change
Within ±30% of initial value
300% or less of the initial specified value
Tangent of the loss angle
Test time : 1000hours ; other items are same as the endurance. Voltage application treatment : According to JIS C5101-4 4.1
Shelf life (125℃)
Vibration test condition
Frequency range
10 to 2000Hz
Amplitude or Acceleration
1.5 mm peak to peak or 40G (392m/s2), whichever is the less severe
Sweep rate
0.5 octave/min.
Vibration axis and duration
X, Y, Z per 2 hours, total 6 hours
Fixation
Vibration
Capacitor mounted by its body which is rigidly clamped to the work surface.
Specification after test
Leakage current
The initial specified value or less
Percentage of capacitance change
Within ±30% of initial value
Tangent of the loss angle
300% or less of the initial specified value
Applicable standards
JIS C5101 - 1,- 4 (IEC 60384 - 1,- 4)
Outline Drawing
Vent
Unit : mm
F±0.5
φD±0.5
Resin coating
φd±0.05 copper plated steel wire (tinned)
15min.
L+α max.
Coefficient of Frequency for Rated Ripple Current
Frequency (Hz)
Rated
capacitance (µF)
1200 to 8200
16
7.5
0.8
2.0
18
7.5
0.8
2.0
RKE
5
min.
20
10.0
1.0
2.0
1k
10k
100k
0.95
1.00
1
Part numbering system (example : 35V2700µF)
Series code
φD
F
φd
α
120
0.85
̶
35
Rated voltage
symbol
V
272
M
K7
Rated capacitance
symbol
Capacitance
tolerance symbol
Casing
symbol
# ̶
Forming
symbol
22
10.0
1.0
2.0
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
RKE
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS
Standard Ratings
Rated voltage(V)
Item
25
Case
35
Rated ripple
current
Case
-40℃
ESR(Ω max.)
50
φD × L (mm)
(mArms)
φD × L (mm)
Casing
symbol
1200
—
—
—
—
—
—
—
—
1500
—
—
—
—
—
J7
0.024
2200
—
20℃
—
16×31.5
Rated ripple
current
Case
-40℃
(mArms)
φD × L (mm)
—
—
ESR(Ω max.)
Casing
symbol
Rated
capacitance
(µF)
20℃
0.14
ESR(Ω max.)
Rated ripple
current
Casing
symbol
20℃
-40℃
16×31.5
J7
0.048
0.20
2940
3160
16×35.5
J8
0.039
0.16
3300
18×35.5
0.15
3520
—
—
—
16×35.5
J8
0.023
0.13
3590
K8
0.033
2700
16×31.5
J7
0.024
0.14
3160
18×31.5
K7
0.020
0.11
3410
—
—
—
3300
16×35.5
J8
0.023
0.13
3590
18×35.5
K8
0.019
0.10
3840
20×40
L9
0.027
—
0.12
(mArms)
—
3930
4700
18×31.5
K7
0.020
0.11
3410
18×40
K9
0.017
0.094
4250
—
—
—
—
—
5600
18×35.5
K8
0.019
0.10
3840
20×40
L9
0.017
0.094
4500
—
—
—
—
—
6800
18×40
K9
0.017
0.094
4250
—
—
—
—
—
—
—
—
—
—
7800
20×40
L9
0.017
0.094
4500
—
—
—
—
—
—
—
—
—
—
8200
22×40
N9
0.017
0.094
4750
—
—
—
—
—
—
—
—
—
—
(Note) Rated ripple current : 125℃ , 100kHz ; ESR : 100kHz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
RKF
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS
®
135°C Use, Miniature, Low ESR, High Vibration Resistance Capacitors
GREEN
CAP
High
Low
ESR
Vibration
Resistance
135˚C
3000hours
Anticleaning
solvent
Vibration resistance (40G,10 to 2000Hz, X,Y,Z = per 2hours).
For Automotive application (ABS and electric power steering etc.)
Guaranteed 3000 hours at 135℃
(63V to 100V : Guaranteed 2000 hours)
●
●
●
High vibration
resistance
RKF
RKC
Marking color : Black print
Specifications
Item
Performance
Category temperature range (℃)
ー40 to +135
Tolerance at rated capacitance (%)
±20
Leakage current (µA)
(max.)
0.01CV or 3 whichever is larger (after 2 minutes) C : Rated capacitance (µF), V : Rated voltage (V)
Tangent of loss angle
(tanδ)
(20℃,120Hz)
(20℃)
Rated voltage (V)
25
35
50
63
80
100
tanδ (max.)
0.14
0.12
0.10
0.10
0.08
0.08
(20℃,120Hz)
0.02 is added to every 1000µF increase over 1000µF.
Rated voltage (V)
Characteristics at high
and low temperature
Impedance ratio (max.)
Z−40℃/Z+20℃
25
35
50
63
80
100
3
3
3
3
3
3
(120Hz)
Test time
Endurance
(135℃ or 125℃)
(Applied ripple current)
3000 hours (63V to 100V : 2000 hours)
Leakage current
The initial specified value or less
Percentage of capacitance change
Within ±30% of initial value
300% or less of the initial specified value
Tangent of the loss angle
Test time : 1000hours ; other items are same as the endurance. Voltage application treatment : According to JIS C5101-4 4.1
Shelf life (135℃)
Vibration test condition
Frequency range
10 to 2000Hz
Amplitude or Acceleration
1.5 mm peak to peak or 40G (392m/s2), whichever is the less severe
0.5 octave/min.
Sweep rate
X, Y, Z per 2 hours, total 6 hours
Vibration axis and duration
Capacitor mounted by its body which is rigidly clamped to the work surface.
Fixation
Vibration
Specification after test
Leakage current
The initial specified value or less
Percentage of capacitance change
Within ±30% of initial value
Tangent of the loss angle
300% or less of the initial specified value
Applicable standards
JIS C5101 - 1,- 4 (IEC 60384 - 1,- 4)
Outline Drawing
Unit : mm
30.0L or over
Vent
φd±0.05 copper plated steel wire (tinned)
F±0.5
φD±0.5
Resin coating
L+α max.
15min.
Coefficient of Frequency for Rated Ripple Current
Frequency (Hz)
Rated
capacitance (µF)
180 to 330
390 to 1000
1100 to 10000
1k
10k
100k
0.85
0.90
0.95
1.00
1.00
1.00
1
1
1
Part numbering system (example : 35V3600µF)
RKF
5
min.
Series code
25L
Vent
120
0.65
0.75
0.85
̶
35
Rated voltage
symbol
V
362
M
K7
Rated capacitance
symbol
Capacitance
tolerance symbol
Casing
symbol
# ̶
Forming
symbol
φd±0.05 copper plated steel wire (tinned)
F±0.5
φD±0.5
Resin coating
L+α max.
φD
F
φd
α
12.5
5.0
0.8
2.0
15min.
16
7.5
0.8
2.0
5
min.
18
7.5
0.8
2.0
20
10.0
1.0
2.0
22
10.0
1.0
2.0
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
RKF
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS
Standard Ratings
Rated
voltage
(V)
25
35
50
Rated
capacitance
(µF)
Case
φD × L (mm)
Casing
symbol
ESR
(Ω max. / 100kHz)
Rated ripple current
(mArms / 100kHz)
Rated
voltage
(V)
Rated
capacitance
(µF)
Case
φD × L (mm)
Casing
symbol
ESR
(Ω max. / 100kHz)
Rated ripple current
(mArms / 100kHz)
20℃
-40℃
135℃
125℃
20℃
-40℃
135℃
125℃
1800
12.5 × 25
Ⅰ6
0.033
0.30
2010
3480
390
12.5 × 25
Ⅰ6
0.076
0.39
2050
2520
2200
12.5 × 30
Ⅰ7
0.028
0.24
2900
4490
560
12.5 × 30
Ⅰ7
0.061
0.30
2630
3110
2700
12.5 × 35
Ⅰ8
0.025
0.21
3190
5140
650
12.5 × 35
Ⅰ8
0.051
0.25
2970
3760
3300
12.5 × 40
Ⅰ9
0.024
0.19
3470
5810
750
12.5 × 40
Ⅰ9
0.045
0.22
3260
4610
J7
0.023
0.18
3400
5480
1000
16 × 31.5
J7
0.049
0.20
3050
3860
1300
16 × 35.5
J8
0.039
0.15
3420
4590
1300
18 × 31.5
K7
0.041
0.15
3220
4080
4700
16 × 31.5
5400
16 × 35.5
J8
0.020
0.14
3630
6070
6200
16 × 40
J9
0.019
0.12
3930
6810
6200
18 × 31.5
K7
0.022
0.16
3470
5600
1500
16 × 40
J9
0.036
0.14
3670
5190
7800
18 × 35.5
K8
0.019
0.12
3750
6280
1800
18 × 35.5
K8
0.032
0.12
3690
5220
5660
63
8200
18 × 40
K9
0.018
0.10
4080
7070
2000
18 × 40
K9
0.031
0.11
3820
9500
20 × 40
L9
0.016
0.090
4570
7950
2500
20 × 40
L9
0.026
0.10
4580
6480
10000
22 × 40
N9
0.016
0.090
5000
8700
2500
22 × 40
N9
0.026
0.10
4830
6830
2520
1100
12.5 × 25
Ⅰ6
0.033
0.30
2010
3480
290
12.5 × 25
Ⅰ6
0.076
0.39
2050
1500
12.5 × 30
Ⅰ7
0.028
0.24
2900
4490
420
12.5 × 30
Ⅰ7
0.061
0.30
2630
3110
1800
12.5 × 35
Ⅰ8
0.025
0.21
3190
5140
490
12.5 × 35
Ⅰ8
0.051
0.25
2970
3760
2000
12.5 × 40
Ⅰ9
0.024
0.19
3470
5810
570
12.5 × 40
Ⅰ9
0.045
0.22
3260
4610
J7
0.023
0.18
3400
5480
750
16 × 31.5
J7
0.049
0.20
3050
3860
820
16 × 35.5
J8
0.039
0.15
3420
4590
820
18 × 31.5
K7
0.041
0.15
3220
4080
16 × 40
J9
0.036
0.14
3670
5190
18 × 35.5
K8
0.032
0.12
3690
5220
2700
16 × 31.5
3100
16 × 35.5
J8
0.020
0.14
3630
6070
3600
16 × 40
J9
0.019
0.12
3930
6810
3600
18 × 31.5
K7
0.022
0.16
3470
5600
950
4700
18 × 35.5
K8
0.019
0.12
3750
6280
1200
80
5400
18 × 40
K9
0.018
0.10
4080
7070
1300
18 × 40
K9
0.031
0.11
3820
5660
5900
20 × 40
L9
0.016
0.090
4570
7950
1500
20 × 40
L9
0.026
0.10
4580
6480
6200
22 × 40
N9
0.016
0.090
5000
8700
1500
22 × 40
N9
0.026
0.10
4830
6830
560
12.5 × 25
Ⅰ6
0.079
0.39
2260
3350
180
12.5 × 25
Ⅰ6
0.099
0.55
1960
2140
750
12.5 × 30
Ⅰ7
0.065
0.30
2520
4220
250
12.5 × 30
Ⅰ7
0.076
0.41
2330
2950
3530
900
12.5 × 35
Ⅰ8
0.057
0.25
2780
4810
290
12.5 × 35
Ⅰ8
0.065
0.35
2630
1000
12.5 × 40
Ⅰ9
0.050
0.22
3020
5240
330
12.5 × 40
Ⅰ9
0.055
0.29
2920
4140
J7
0.048
0.20
2960
5130
420
J7
0.060
0.27
2720
3440
1300
16 × 31.5
16 × 31.5
1600
16 × 35.5
J8
0.039
0.15
3160
5480
1900
16 × 40
J9
0.034
0.14
3420
5930
2000
18 × 31.5
K7
0.038
0.15
3020
5240
570
16 × 40
J9
0.041
2400
18 × 35.5
K8
0.033
0.12
3390
5870
680
18 × 35.5
K8
0.044
2600
18 × 40
K9
0.031
0.11
3700
6420
820
18 × 40
K9
0.038
0.14
100
510
16 × 35.5
J8
0.052
0.23
2960
4190
510
18 × 31.5
K7
0.054
0.20
2920
3920
0.18
3380
5020
0.16
3330
4710
3560
5280
3300
20 × 40
L9
0.027
0.10
4200
7260
950
20 × 40
L9
0.033
0.13
3820
5410
3300
22 × 40
N9
0.027
0.10
4420
7660
1000
22 × 40
N9
0.033
0.13
4030
5700
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
RKG
RKG
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS
®
GREEN
CAP
150°C Use, Miniature, Low ESR, High Vibration Resistance Capacitors
High
Low
ESR
Vibration
Resistance
150˚C
2000hours
Anticleaning
solvent
Vibration resistance (40G,10 to 2000Hz, X,Y,Z = per 2hours).
For Automotive application (ABS and electric power steering etc.)
Guaranteed 2000 hours at 150℃
High vibration
(63V, 80V : 1000 hours)
●
●
●
resistance
RKG
RQA
Marking color : Black print
Specifications
Item
Performance
ー40 to +150
±20
Category temperature range (℃)
Tolerance at rated capacitance (%)
Leakage current (µA)
(max.)
(20℃,120Hz)
0.01CV or 3 whichever is larger (after 2 minutes) C : Rated capacitance (µF), V : Rated voltage (V)
Rated voltage (V)
tanδ (max.)
Tangent of loss angle
(tanδ)
(20℃)
25
0.14
35
0.12
50
0.10
63
0.10
25
35
50
63
80
3
3
3
3
3
80
0.08
(20℃,120Hz)
0.02 is added to every 1000µF increase over 1000µF.
Rated voltage (V)
Impedance ratio (max.)
Z−40℃/Z+20℃
Characteristics at high
and low temperature
(120Hz)
Test time
Leakage current
Percentage of capacitance change
Tangent of the loss angle
Endurance
(150℃ or 125℃)
(Applied ripple current)
Shelf life (150℃)
2000 hours (63V, 80V : 1000 hours)
The initial specified value or less
Within ±30% of initial value
300% or less of the initial specified value
Test time : 1000hours ; other items are same as the endurance. Voltage application treatment : According to JIS C5101-4 4.1
Vibration test condition
Frequency range
Amplitude or Acceleration
Sweep rate
Vibration axis and duration
Fixation
Specification after test
Leakage current
Percentage of capacitance change
Tangent of the loss angle
Vibration
10 to 2000Hz
1.5 mm peak to peak or 40G (392m/s2), whichever is the less severe
0.5 octave/min.
X, Y, Z per 2 hours, total 6 hours
Capacitor mounted by its body which is rigidly clamped to the work surface.
The initial specified value or less
Within ±30% of initial value
300% or less of the initial specified value
Applicable standards
JIS C5101 - 1,- 4 (IEC 60384 - 1,- 4 )
Outline Drawing
Vent
Unit : mm
F±0.5
φD±0.5
Resin coating
RKG
̶
35
V
Rated voltage
symbol
Series code
22
10.0
1.0
2.0
20
10.0
1.0
2.0
18
7.5
0.8
2.0
φD
F
φd
α
120
1k
10k
100k
0.75
0.85
0.90
0.95
1.00
1.00
1
1
Part numbering system (example : 35V2700µF)
5
min.
15min.
L+α max.
Coefficient of Frequency for Rated Ripple Current
Frequency (Hz)
Rated
capacitance (µF)
800 to 1000
1100 to 4700
φd±0.05 copper plated steel wire (tinned)
272
M
K9
Rated capacitance
symbol
Capacitance
tolerance symbol
Casing
symbol
# ̶
Forming
symbol
Standard Ratings
25
Rated voltage (V)
Rated
capacitance
(µF)
Item
35
ESR
Rated ripple current
Casing (Ω max. / 100kHz) (mArms / 100kHz)
φD × L (mm) symbol
20℃
-40℃
150℃
125℃
Case
50
ESR
Rated ripple current
Casing (Ω max. / 100kHz) (mArms / 100kHz)
φD × L (mm) symbol
20℃
-40℃
150℃
125℃
Case
1800
—
—
—
—
—
—
—
—
—
—
—
—
2400
—
—
—
—
—
—
—
—
—
—
—
—
18 × 42
20 × 42
22 × 42
—
K9
L9
N9
—
0.020
0.018
0.018
—
0.11
0.10
0.10
—
3100
3500
3700
—
8000
10000
10500
—
—
—
—
—
—
—
2700
—
—
—
—
—
—
3300
—
—
—
—
—
—
3900
18 × 42
20 × 42
22 × 42
K9
L9
N9
0.020
0.018
0.018
0.11
0.10
0.10
3100
3500
3700
8000
10000
10500
4700
63
Rated voltage (V)
Rated
capacitance
(µF)
800
1000
1100
1200
1500
1800
Item
—
—
—
18 × 42
20 × 42
22 × 42
—
—
—
K9
L9
N9
—
—
—
0.034
0.029
0.029
Rated ripple current
18 × 42
20 × 42
22 × 42
—
K9
L9
N9
—
0.034
0.030
0.030
—
0.19
0.17
0.17
—
2800
3200
3400
—
7000
9000
9500
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
80
ESR
Rated ripple current
Casing (Ω max. / 100kHz) (mArms / 100kHz)
φD × L (mm) symbol
20℃
-40℃
150℃
125℃
Case
ESR
Casing (Ω max. / 100kHz) (mArms / 100kHz)
φD × L (mm) symbol
20℃
-40℃
150℃
125℃
Case
—
—
—
0.19
0.16
0.16
—
—
—
2900
3300
3500
—
—
—
7300
9300
9800
ESR
Rated ripple current
Casing (Ω max. / 100kHz) (mArms / 100kHz)
φD × L (mm) symbol
20℃
-40℃
150℃
125℃
Case
18 × 42
20 × 42
22 × 42
—
—
—
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
K9
L9
N9
—
—
—
0.034
0.029
0.029
—
—
—
0.19
0.16
0.16
—
—
—
2900
3300
3500
—
—
—
7300
9300
9800
—
—
—
CAT.No.2021/2022E
LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS
Large
AAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
Capacitance Aluminum Electrolytic Capacitors
CAT.No.2021/2022
LA5, LT5
LA5
LARGE CAPACITANCE
ALUMINUM ELECTROLYTIC
LARGE CAPACITANCE
ALUMINUM ELECTROLYTIC
CAPACITORSCAPACITORS
PCB Snap-In Miniaturized Capacitors
●
●
GREEN
CAP
20mm-tall products for every diameter of φ22 to φ35 are now offered in series.
As many as 4 case sizes available for the same rating.
Miniaturized, High ripple
(
LA5
Specifications
Miniaturized, High ripple, Long life
) (
LA4
Item
Marking color : White print on a black sleeve
)
LA3
Performance
−40 to +85 (450V is at −25 to +85)
±20
Category temperature range (℃)
Tolerance at rated capacitance (%)
Leakage current (µA)
(max.)
(20℃,120Hz)
3√ ̄
CV (after 5 minutes) C : Rated capacitance (µF) ; V : Rated voltage (V)
Rated voltage (V)
tanδ (max.)
Tangent of loss angle
(tanδ)
Rated voltage (V)
φD (mm)
tanδ
(max.)
22 to 30
35
Rated voltage (V)
Z−25℃/Z+20℃
Z−40℃/Z+20℃
Characteristics at high
and low temperature
Impedance ratio (max.)
10
0.80
16
0.60
25
0.50
160 to 250
315 to 450
0.10
0.15
0.15
0.15
10
5
18
16 to 35
4
15
(20℃)
35
0.40
50
0.30
63 to 100
0.20
(20℃,120Hz)
50 to 100
3
10
160 to 200
3
6
250 to 400
4
8
450
4
̶
(120Hz)
Endurance (85℃)
(Applied ripple current)
Shelf life (85℃)
Test time
Leakage current
Percentage of capacitance change
Tangent of the loss angle
2000 hours
The initial specified value or less
Within ±20% of initial value
200% or less of the initial specified value
Test time
Leakage current
Percentage of capacitance change
Tangent of the loss angle
1000 hours
The initial specified value or less
Within ±15% of initial value
150% or less of the initial specified value
Voltage application treatment : According to JIS C5101-4 4.1
JIS C5101 - 1,- 4 (IEC 60384 - 1,- 4)
Applicable standards
Outline Drawing
Unit : mm
2‒φ2
‒
Sleeve
4.0±0.5
Vent
(2.1)
(‒) Negative terminal indicated by
cross notching
L+2max.
(5.4)
(0.9)
+0.2
1.5
−0.1
Markings
(4.7)
φD+1/0
1
0.
±
10
10
Lug terminal details
Thickness : 0.8t
0.85±0.15
Position of PC board holes
( ) : Reference size
3.3±0.1
Three terminals type
10±0.1
φ2.5
2−φ2
4.75±0.1
Coefficient of Frequency for Rated Ripple Current
Frequency (Hz)
Part numbering system
Rated voltage (V)
series LA5, standard terminal type :400V330µF
LA5
400
Series code
Rated voltage
symbol
V
331
M
Rated capacitance
symbol
Capacitance
tolerance symbol
S43 #
Casing
symbol
B
Optional
symbol
100 or less
160 to 250
315 or more
50
120
1k
10k
30k
0.95
0.81
0.77
1
1
1
1.10
1.32
1.30
1.15
1.45
1.41
1.15
1.50
1.43
series LT5, three terminals type :400V330µF
LT5
Series code
̶ 400
Rated voltage
symbol
V
331
M
Rated capacitance
symbol
Capacitance
tolerance symbol
S43 #
Casing
symbol
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
B
Optional
symbol
CAT.No.2021/2022E
LA5, LT5
LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS
Standard Ratings
Rated
Rated
voltage capacitance
(V)
(µF)
10
Case(mm)
D
L
Casing
Symbol
Rated ripple
current
(Arms)
Rated
Rated
voltage capacitance
(V)
(µF)
Case(mm)
D
L
Casing
Symbol
Rated ripple
current
(Arms)
Rated
Rated
voltage capacitance
(V)
(µF)
Case(mm)
D
L
Casing
Symbol
Rated ripple
current
(Arms)
8200
22
20
S21
2.00
47000
35
25
S52
5.97
22000
22
35
S24
4.12
10000
22
20
S21
2.21
47000
35
30
S53
6.20
22000
22
40
S25
4.31
12000
22
20
S21
2.42
56000
25
45
S36
6.47
22000
22
50
S27
4.50
12000
22
25
S22
2.50
56000
25
50
S37
6.55
22000
25
30
S33
4.12
12000
25
20
S31
2.50
56000
30
35
S44
6.59
22000
25
35
S34
4.31
15000
22
25
S22
2.80
56000
30
40
S45
6.66
22000
25
40
S35
4.40
15000
22
30
S23
3.00
56000
30
45
S46
6.90
22000
30
25
S42
4.31
15000
25
20
S31
2.80
56000
35
30
S53
6.77
22000
30
30
S43
4.40
18000
22
25
S22
3.06
56000
35
35
S54
7.00
22000
35
20
S51
4.48
18000
22
30
S23
3.29
68000
25
50
S37
7.22
22000
35
25
S52
4.60
18000
25
20
S31
3.06
68000
30
40
S45
7.34
27000
22
40
S25
4.78
18000
25
25
S32
3.20
68000
30
45
S46
7.60
27000
22
45
S26
4.90
18000
30
20
S41
3.30
22000
22
30
S23
3.63
10
68000
30
50
S47
7.70
27000
25
35
S34
4.78
68000
35
30
S53
7.46
27000
25
40
S35
4.87
22000
22
35
S24
3.70
68000
35
35
S54
7.71
27000
25
45
S36
5.00
22000
25
25
S32
3.54
68000
35
40
S55
7.90
27000
30
25
S42
4.78
22000
25
30
S33
3.70
82000
30
45
S46
8.35
27000
30
30
S43
4.87
22000
30
20
S41
3.65
82000
30
50
S47
8.46
27000
30
35
S44
5.10
22000
35
20
S51
3.90
82000
35
35
S54
8.47
27000
35
25
S52
5.10
27000
22
35
S24
3.90
82000
35
40
S55
8.68
33000
22
45
S26
5.41
27000
22
40
S25
4.10
82000
35
45
S56
8.90
33000
22
50
S27
5.51
27000
22
45
S26
4.30
100000
30
50
S47
9.34
33000
25
40
S35
5.39
5.53
27000
25
25
S32
3.92
100000
35
40
S55
9.58
33000
25
45
S36
27000
25
30
S33
4.10
100000
35
50
S57
10.20
33000
30
30
S43
5.39
27000
25
35
S34
4.20
120000
35
45
S56
10.80
33000
30
35
S44
5.64
27000
30
20
S41
4.04
120000
35
50
S57
11.20
27000
30
25
S42
4.20
150000
35
50
S57
12.50
16
33000
30
40
S45
5.80
33000
35
25
S52
5.63
27000
35
20
S51
4.32
5600
22
20
S21
1.90
33000
35
30
S53
5.80
33000
22
35
S24
4.53
6800
22
20
S21
2.09
39000
25
45
S36
6.01
33000
22
40
S25
4.54
8200
22
20
S21
2.21
39000
25
50
S37
6.27
33000
22
50
S27
4.90
8200
22
25
S22
2.40
39000
30
35
S44
6.13
33000
25
30
S33
4.53
8200
25
20
S31
2.30
39000
30
40
S45
6.31
33000
25
35
S34
4.64
10000
22
25
S22
2.65
39000
30
45
S46
6.40
33000
25
40
S35
4.80
10000
25
20
S31
2.54
39000
35
30
S53
6.31
33000
30
25
S42
4.64
12000
22
25
S22
2.78
39000
35
35
S54
6.50
33000
30
30
S43
4.90
12000
22
30
S23
3.00
47000
25
50
S37
6.88
33000
35
20
S51
4.78
12000
25
20
S31
2.78
47000
30
40
S45
6.92
33000
35
25
S52
5.00
12000
25
25
S32
2.90
47000
30
45
S46
7.03
39000
22
40
S25
4.93
12000
30
20
S41
3.00
47000
30
50
S47
7.20
39000
22
45
S26
5.17
39000
25
35
S34
5.05
16
15000
22
30
S23
3.35
47000
35
30
S53
6.92
15000
22
35
S24
3.40
47000
35
35
S54
7.14
39000
25
40
S35
5.22
15000
25
25
S32
3.24
47000
35
40
S55
7.40
39000
25
45
S36
5.40
15000
25
30
S33
3.40
56000
30
45
S46
7.67
39000
30
25
S42
5.05
15000
30
20
S41
3.35
56000
30
50
S47
7.86
39000
30
30
S43
5.33
15000
35
20
S51
3.70
56000
35
35
S54
7.79
39000
30
35
S44
5.50
18000
22
30
S23
3.67
56000
35
40
S55
8.08
39000
35
25
S52
5.44
18000
22
35
S24
3.72
56000
35
45
S56
8.20
47000
22
50
S27
5.85
18000
22
40
S25
3.90
68000
30
50
S47
8.66
47000
25
40
S35
5.73
18000
25
25
S32
3.55
68000
35
40
S55
8.90
9.04
47000
25
45
S36
5.93
18000
25
30
S33
3.72
68000
35
45
S56
47000
25
50
S37
6.00
18000
25
35
S34
3.90
82000
35
45
S56
9.92
47000
30
30
S43
5.85
18000
30
20
S41
3.67
82000
35
50
S57
10.30
100000
35
50
S57
11.40
47000
30
35
S44
6.04
18000
30
25
S42
3.90
47000
30
40
S45
6.10
18000
35
20
S51
4.05
(Note) Rated ripple current : 85℃ , 120Hz ; ESR. : 20℃ , 120Hz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
LA5, LT5
LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS
Standard Ratings
Rated
Rated
voltage capacitance
(V)
(µF)
25
Case(mm)
D
L
Casing
Symbol
Rated ripple
current
(Arms)
Rated
Rated
voltage capacitance
(V)
(µF)
Case(mm)
D
L
Casing
Symbol
Rated ripple
current
(Arms)
Rated
Rated
voltage capacitance
(V)
(µF)
Case(mm)
D
L
Casing
Symbol
Rated ripple
current
(Arms)
3900
22
20
S21
1.80
22000
35
25
S52
5.33
10000
22
35
S24
3.52
4700
22
20
S21
1.98
22000
35
30
S53
5.50
10000
22
40
S25
3.64
5600
22
20
S21
2.16
27000
25
45
S36
5.76
10000
22
50
S27
3.90
5600
22
25
S22
2.30
27000
25
50
S37
5.98
10000
25
30
S33
3.52
5600
25
20
S31
2.20
27000
30
35
S44
5.88
10000
25
35
S34
3.64
6800
22
25
S22
2.53
27000
30
40
S45
6.09
10000
25
40
S35
3.80
6800
25
20
S31
2.42
27000
30
45
S46
6.20
10000
30
25
S42
3.64
8200
22
25
S22
2.78
27000
35
30
S53
6.09
10000
30
30
S43
3.80
8200
22
30
S23
2.80
27000
35
35
S54
6.30
10000
35
20
S51
3.76
8200
25
20
S31
2.66
33000
25
50
S37
6.61
10000
35
25
S52
4.00
8200
25
25
S32
2.80
33000
30
40
S45
6.74
12000
22
40
S25
3.99
8200
30
20
S41
2.90
33000
30
45
S46
6.85
12000
22
45
S26
4.09
10000
22
30
S23
3.09
10000
22
35
S24
3.20
25
33000
30
50
S47
7.00
12000
25
35
S34
3.99
33000
35
30
S53
6.74
12000
25
40
S35
4.16
10000
25
25
S32
3.09
33000
35
35
S54
6.96
12000
25
45
S36
4.30
10000
25
30
S33
3.20
33000
35
40
S55
7.20
12000
30
25
S42
3.99
10000
30
20
S41
3.20
39000
30
45
S46
7.45
12000
30
30
S43
4.16
10000
35
20
S51
3.50
39000
30
50
S47
7.61
12000
30
35
S44
4.30
12000
22
30
S23
3.39
39000
35
35
S54
7.57
12000
35
25
S52
4.38
12000
22
35
S24
3.51
39000
35
40
S55
7.83
15000
22
45
S26
4.58
12000
22
40
S25
3.70
39000
35
45
S56
8.00
15000
22
50
S27
4.78
12000
25
25
S32
3.39
47000
30
50
S47
8.35
15000
25
40
S35
4.65
4.81
12000
25
30
S33
3.51
47000
35
40
S55
8.59
15000
25
45
S36
12000
25
35
S34
3.70
47000
35
45
S56
8.78
15000
25
50
S37
4.90
12000
30
20
S41
3.51
56000
35
45
S56
9.59
15000
30
30
S43
4.65
12000
30
25
S42
3.70
56000
35
50
S57
9.96
12000
35
20
S51
3.83
68000
35
50
S57
11.00
35
15000
30
35
S44
4.81
15000
30
40
S45
5.00
15000
22
35
S24
3.92
2700
22
20
S21
1.60
15000
35
25
S52
4.90
15000
22
40
S25
4.14
3300
22
20
S21
1.77
15000
35
30
S53
5.00
15000
22
50
S27
4.30
3900
22
20
S21
1.92
18000
25
45
S36
5.27
15000
25
30
S33
3.92
3900
22
25
S22
2.10
18000
25
50
S37
5.37
15000
25
35
S34
4.14
3900
25
20
S31
2.00
18000
30
35
S44
5.27
15000
25
40
S35
4.20
4700
22
25
S22
2.31
18000
30
40
S45
5.48
15000
30
25
S42
4.14
4700
22
30
S23
2.40
18000
30
45
S46
5.60
15000
30
30
S43
4.30
4700
25
20
S31
2.20
18000
35
30
S53
5.48
15000
35
20
S51
4.29
5600
22
25
S22
2.52
18000
35
35
S54
5.70
15000
35
25
S52
4.40
5600
22
30
S23
2.62
22000
25
50
S37
5.93
18000
22
40
S25
4.53
5600
25
20
S31
2.40
22000
30
40
S45
6.06
18000
22
45
S26
4.62
5600
25
25
S32
2.60
22000
30
45
S46
6.19
18000
25
35
S34
4.53
18000
25
40
S35
4.60
35
5600
30
20
S41
2.60
22000
30
50
S47
6.30
6800
22
30
S23
2.89
22000
35
30
S53
6.06
18000
25
45
S36
4.70
6800
22
35
S24
2.90
22000
35
35
S54
6.30
18000
30
25
S42
4.53
6800
25
25
S32
2.87
22000
35
40
S55
6.40
18000
30
30
S43
4.71
6800
25
30
S33
2.90
27000
30
45
S46
6.86
18000
30
35
S44
4.80
6800
30
20
S41
2.87
27000
30
50
S47
6.98
18000
35
25
S52
4.82
6800
35
20
S51
3.10
27000
35
35
S54
6.98
22000
22
45
S26
5.11
8200
22
35
S24
3.18
27000
35
40
S55
7.09
22000
22
50
S27
5.21
8200
22
40
S25
3.30
27000
35
50
S57
7.40
22000
25
40
S35
5.09
8200
25
25
S32
3.15
33000
30
50
S47
7.72
7.84
22000
25
45
S36
5.20
8200
25
30
S33
3.18
33000
35
40
S55
22000
25
50
S37
5.40
8200
25
35
S34
3.30
33000
35
45
S56
7.87
22000
30
30
S43
5.21
8200
30
20
S41
3.15
39000
35
45
S56
8.56
39000
35
50
S57
8.89
22000
30
35
S44
5.31
8200
30
25
S42
3.30
22000
30
40
S45
5.50
8200
35
20
S51
3.40
(Note) Rated ripple current : 85℃ , 120Hz ; ESR. : 20℃ , 120Hz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
LA5, LT5
LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS
Standard Ratings
Rated
Rated
voltage capacitance
(V)
(µF)
50
Case(mm)
D
L
Casing
Symbol
Rated ripple
current
(Arms)
Rated
Rated
voltage capacitance
(V)
(µF)
Case(mm)
D
L
Casing
Symbol
Rated ripple
current
(Arms)
Rated
Rated
voltage capacitance
(V)
(µF)
Case(mm)
D
L
Casing
Symbol
Rated ripple
current
(Arms)
1800
22
20
S21
1.60
10000
30
30
S43
4.73
3900
35
20
S51
3.40
2200
22
20
S21
1.77
10000
30
35
S44
4.86
4700
22
35
S24
3.46
2700
22
20
S21
1.96
10000
30
40
S45
5.00
4700
22
40
S25
3.62
2700
22
25
S22
2.10
10000
35
25
S52
4.85
4700
22
45
S26
3.70
2700
25
20
S31
2.10
10000
35
30
S53
5.00
4700
25
30
S33
3.51
3300
22
25
S22
2.32
12000
25
45
S36
5.20
4700
25
35
S34
3.60
3300
25
20
S31
2.32
12000
25
50
S37
5.37
4700
30
25
S42
3.62
3900
22
25
S22
2.52
12000
30
35
S44
5.32
4700
35
20
S51
3.73
3900
22
30
S23
2.60
12000
30
40
S45
5.48
5600
22
40
S25
3.95
3900
25
20
S31
2.52
12000
30
45
S46
5.60
5600
22
45
S26
4.04
3900
25
25
S32
2.60
12000
35
30
S53
5.48
5600
22
50
S27
4.10
3900
30
20
S41
2.70
12000
35
35
S54
5.70
5600
25
35
S34
3.93
4700
22
30
S23
2.85
15000
25
50
S37
6.00
5600
25
40
S35
4.00
4700
22
35
S24
3.10
15000
30
40
S45
6.12
5600
30
25
S42
3.95
4700
25
25
S32
2.85
4700
25
30
S33
3.00
50
15000
30
45
S46
6.26
5600
30
30
S43
4.10
15000
30
50
S47
6.40
5600
35
20
S51
4.07
4700
30
20
S41
2.96
15000
35
30
S53
6.12
5600
35
25
S52
4.20
4700
35
20
S51
3.20
15000
35
35
S54
6.37
6800
22
45
S26
4.45
5600
22
30
S23
3.12
15000
35
40
S55
6.50
6800
22
50
S27
4.52
5600
22
35
S24
3.38
18000
30
45
S46
6.86
6800
25
35
S34
4.33
5600
22
40
S25
3.40
18000
30
50
S47
7.01
6800
25
40
S35
4.41
5600
25
25
S32
3.12
18000
35
35
S54
6.98
6800
25
45
S36
4.60
4.52
5600
25
30
S33
3.27
18000
35
40
S55
7.12
6800
30
30
S43
5600
25
35
S34
3.40
18000
35
45
S56
7.30
6800
30
35
S44
4.60
5600
30
20
S41
3.24
22000
30
50
S47
7.75
6800
35
25
S52
4.63
5600
30
25
S42
3.40
22000
35
40
S55
7.87
5600
35
20
S51
3.49
22000
35
45
S56
8.07
63
6800
35
30
S53
4.80
8200
22
50
S27
4.96
6800
22
35
S24
3.73
27000
35
45
S56
8.94
8200
25
45
S36
5.05
6800
22
40
S25
3.75
27000
35
50
S57
9.29
8200
30
35
S44
5.05
6800
22
50
S27
3.90
1500
22
20
S21
1.70
8200
30
40
S45
5.20
6800
25
30
S33
3.61
1800
22
20
S21
1.86
8200
35
25
S52
5.08
6800
25
35
S34
3.75
1800
25
20
S31
2.00
8200
35
30
S53
5.27
6800
25
40
S35
3.80
2200
22
20
S21
2.06
8200
35
35
S54
5.50
6800
30
25
S42
3.75
2200
22
25
S22
2.20
10000
25
50
S37
5.82
6800
30
30
S43
3.90
2200
25
20
S31
2.21
10000
30
35
S44
5.58
6800
35
20
S51
3.85
2700
22
25
S22
2.25
10000
30
40
S45
5.74
6800
35
25
S52
4.00
2700
22
30
S23
2.50
10000
30
45
S46
5.90
8200
22
40
S25
4.11
2700
25
20
S31
2.25
10000
35
30
S53
5.82
8200
22
45
S26
4.21
2700
25
25
S32
2.30
10000
35
35
S54
6.07
8200
25
35
S34
4.11
8200
25
40
S35
4.17
63
2700
30
20
S41
2.60
10000
35
40
S55
6.20
3300
22
30
S23
2.76
12000
30
45
S46
6.46
8200
25
45
S36
4.30
3300
22
35
S24
2.90
12000
35
35
S54
6.65
8200
30
25
S42
4.11
3300
25
25
S32
2.54
12000
35
40
S55
6.79
8200
30
30
S43
4.28
3300
30
20
S41
2.87
12000
35
45
S56
6.90
8200
30
35
S44
4.40
3900
22
30
S23
3.00
15000
30
50
S47
7.52
8200
35
25
S52
4.39
3900
22
35
S24
3.15
15000
35
40
S55
7.59
10000
22
45
S26
4.64
3900
22
40
S25
3.30
15000
35
45
S56
7.71
10000
22
50
S27
4.73
3900
25
25
S32
2.76
15000
35
50
S57
7.90
10000
25
40
S35
4.61
3900
25
30
S33
3.20
18000
35
45
S56
8.45
10000
25
45
S36
4.75
3900
30
20
S41
3.12
18000
35
50
S57
8.65
10000
25
50
S37
4.90
3900
30
25
S42
3.30
22000
35
50
S57
9.57
(Note) Rated ripple current : 85℃ , 120Hz ; ESR. : 20℃ , 120Hz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
LA5, LT5
LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS
Standard Ratings
Rated
Rated
voltage capacitance
(V)
(µF)
80
Case(mm)
D
L
Casing
Symbol
Rated ripple
current
(Arms)
Rated
Rated
voltage capacitance
(V)
(µF)
Case(mm)
D
L
Casing
Symbol
Rated ripple
current
(Arms)
Rated
Rated
voltage capacitance
(V)
(µF)
Case(mm)
D
L
Casing
Symbol
Rated ripple
current
(Arms)
1000
22
20
S21
1.50
5600
25
50
S37
4.37
2200
22
45
S26
3.20
1200
22
20
S21
1.64
5600
30
35
S44
4.37
2200
25
30
S33
3.03
1200
25
20
S31
1.70
5600
30
40
S45
4.50
2200
25
35
S34
3.10
1500
22
25
S22
1.90
5600
35
30
S53
4.58
2200
25
40
S35
3.20
1500
25
20
S31
1.90
5600
35
35
S54
4.70
2200
30
25
S42
3.10
1800
22
25
S22
2.08
6800
25
50
S37
4.81
2200
30
30
S43
3.20
1800
22
30
S23
2.20
6800
30
40
S45
4.96
2200
35
20
S51
3.27
1800
25
20
S31
2.08
6800
30
45
S46
5.10
2200
35
25
S52
3.40
1800
25
25
S32
2.20
6800
35
30
S53
5.05
2700
22
45
S26
3.55
1800
30
20
S41
2.20
6800
35
35
S54
5.18
2700
22
50
S27
3.70
2200
22
30
S23
2.43
2200
22
35
S24
2.50
80
6800
35
40
S55
5.30
2700
25
35
S34
3.43
8200
30
45
S46
5.60
2700
25
40
S35
3.55
2200
25
25
S32
2.43
8200
30
50
S47
5.83
2700
25
45
S36
2.90
2200
25
30
S33
2.50
8200
35
35
S54
5.69
2700
30
30
S43
3.55
2200
30
20
S41
2.43
8200
35
40
S55
5.82
2700
30
35
S44
3.70
2700
22
30
S23
2.69
8200
35
45
S56
6.00
2700
35
25
S52
3.77
2700
22
35
S24
2.77
10000
30
50
S47
6.44
3300
22
50
S27
4.09
2700
22
40
S25
2.80
10000
35
40
S55
6.43
3300
25
40
S35
3.92
2700
25
25
S32
2.69
10000
35
45
S56
6.63
3300
25
45
S36
3.98
2700
25
30
S33
2.77
10000
35
50
S57
6.80
3300
25
50
S37
4.10
2700
30
20
S41
2.69
12000
35
45
S56
7.26
3300
30
30
S43
3.92
2700
30
25
S42
2.90
12000
35
50
S57
7.45
3300
30
35
S44
4.09
4.20
2700
35
20
S51
3.00
560
22
20
S21
1.30
3300
30
40
S45
3300
22
35
S24
3.06
680
22
20
S21
1.43
3300
35
25
S52
4.16
3300
22
40
S25
3.10
820
22
20
S21
1.57
3300
35
30
S53
4.30
100
3300
22
45
S26
3.20
820
22
25
S22
1.70
3900
25
45
S36
4.33
3300
25
30
S33
3.06
820
25
20
S31
1.70
3900
25
50
S37
4.46
3300
25
35
S34
3.10
1000
22
25
S22
1.88
3900
30
35
S44
4.45
3300
30
25
S42
3.21
1000
25
20
S31
1.88
3900
30
40
S45
4.57
3300
35
20
S51
3.32
1200
22
25
S22
2.06
3900
30
45
S46
4.70
3900
22
40
S25
3.37
1200
22
30
S23
2.10
3900
35
30
S53
4.67
3900
22
45
S26
3.48
1200
25
20
S31
2.06
3900
35
35
S54
4.80
3900
22
50
S27
3.60
1200
25
25
S32
2.10
4700
30
40
S45
5.01
3900
25
35
S34
3.37
1200
30
20
S41
2.20
4700
30
45
S46
5.16
3900
25
40
S35
3.50
1500
22
30
S23
2.35
4700
30
50
S47
5.20
3900
30
25
S42
3.49
3900
30
30
S43
3.60
100
1500
22
35
S24
2.50
4700
35
30
S53
5.13
1500
25
25
S32
2.35
4700
35
35
S54
5.27
3900
35
25
S52
3.70
1500
25
30
S33
2.50
4700
35
40
S55
5.40
4700
22
45
S26
3.82
1500
30
20
S41
2.46
5600
30
45
S46
5.63
4700
22
50
S27
3.95
1500
35
20
S51
2.70
5600
30
50
S47
5.68
4700
25
40
S35
3.84
1800
22
35
S24
2.74
5600
35
35
S54
5.75
4700
25
45
S36
3.92
1800
22
40
S25
2.80
5600
35
40
S55
5.89
4700
25
50
S37
4.00
1800
25
30
S33
2.74
5600
35
45
S56
6.00
4700
30
30
S43
3.95
1800
25
35
S34
2.80
6800
30
50
S47
6.25
4700
30
35
S44
4.00
1800
30
20
S41
2.69
6800
35
40
S55
6.50
4700
35
25
S52
4.06
1800
30
25
S42
2.80
6800
35
45
S56
6.61
4700
35
30
S53
4.20
1800
35
20
S51
2.96
8200
35
45
S56
7.26
5600
25
45
S36
4.15
2200
22
40
S25
3.10
8200
35
50
S57
7.55
(Note) Rated ripple current : 85℃ , 120Hz ; ESR. : 20℃ , 120Hz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
LA5, LT5
LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS
Standard Ratings
Rated
Rated
voltage capacitance
(V)
(µF)
160
Case(mm)
D
L
Casing
Symbol
Rated ripple
current
(Arms)
Rated
Rated
voltage capacitance
(V)
(µF)
Case(mm)
D
L
Casing
Symbol
Rated ripple
current
(Arms)
Rated
Rated
voltage capacitance
(V)
(µF)
Case(mm)
D
L
Casing
Symbol
Rated ripple
current
(Arms)
270
22
20
S21
1.49
1500
30
35
S44
4.52
680
35
20
S51
2.42
330
22
20
S21
1.65
1500
30
40
S45
3.70
820
22
35
S24
2.96
390
22
20
S21
1.71
1500
35
25
S52
4.24
820
22
40
S25
3.11
390
22
25
S22
1.93
1500
35
30
S53
4.56
820
22
45
S26
2.60
390
25
20
S31
1.76
1800
25
50
S37
5.26
820
25
30
S33
2.96
470
22
25
S22
2.12
1800
30
35
S44
4.95
820
25
35
S34
3.14
470
25
20
S31
1.93
1800
30
40
S45
5.14
820
25
40
S35
2.60
560
22
25
S22
2.31
1800
30
45
S46
4.20
820
30
25
S42
3.00
560
22
30
S23
2.43
1800
35
30
S53
4.99
820
30
30
S43
3.20
560
25
25
S32
2.43
1800
35
35
S54
5.21
820
35
20
S51
2.66
560
30
20
S41
2.11
680
22
30
S23
2.68
160
2200
30
40
S45
5.68
820
35
25
S52
3.13
2200
30
45
S46
5.93
1000
22
45
S26
3.61
680
22
35
S24
2.70
2200
30
50
S47
4.70
1000
25
35
S34
3.47
680
25
25
S32
2.68
2200
35
35
S54
5.76
1000
25
40
S35
3.60
680
25
30
S33
2.70
2200
35
40
S55
4.70
1000
25
45
S36
2.90
680
30
20
S41
2.33
2700
30
50
S47
6.83
1000
30
25
S42
3.23
680
35
20
S51
2.42
2700
35
40
S55
6.61
1000
30
30
S43
3.53
820
22
35
S24
2.96
2700
35
50
S57
5.40
1000
35
25
S52
3.46
820
22
40
S25
2.50
3300
35
45
S56
7.60
1200
22
50
S27
4.11
820
25
30
S33
2.96
3900
35
50
S57
8.61
1200
25
40
S35
3.94
820
25
35
S34
2.50
220
22
20
S21
1.34
820
30
20
S41
2.56
270
22
20
S21
1.49
180
1200
25
45
S36
4.13
1200
25
50
S37
3.30
3.87
820
30
25
S42
3.13
330
22
20
S21
1.56
1200
30
30
S43
820
35
20
S51
2.66
330
22
25
S22
1.77
1200
30
35
S44
4.04
1000
22
40
S25
3.43
330
25
20
S31
1.62
1200
35
25
S52
3.79
1000
22
50
S27
2.90
390
22
25
S22
1.92
1200
35
30
S53
4.07
1000
25
30
S33
3.27
390
25
20
S31
1.76
1500
25
50
S37
4.80
1000
25
35
S34
3.47
470
22
25
S22
2.11
1500
30
35
S44
4.52
1000
25
40
S35
2.80
470
22
30
S23
2.23
1500
30
45
S46
4.90
1000
30
25
S42
3.30
470
25
25
S32
2.23
1500
35
30
S53
4.56
1000
30
30
S43
3.54
470
30
20
S41
1.94
1500
35
35
S54
4.76
1000
35
20
S51
2.94
1000
35
25
S52
3.46
180
560
22
30
S23
2.43
1800
30
40
S45
5.14
560
22
35
S24
2.45
1800
30
45
S46
5.36
1200
22
45
S26
3.96
560
25
25
S32
2.43
1800
30
50
S47
4.30
1200
25
35
S34
3.80
560
25
30
S33
2.45
1800
35
35
S54
5.21
1200
25
45
S36
4.13
560
30
20
S41
2.12
1800
35
40
S55
4.30
1200
30
30
S43
3.87
560
35
20
S51
2.10
2200
30
45
S46
5.93
1200
30
35
S44
3.30
680
22
35
S24
2.70
2200
30
50
S47
6.17
1200
35
25
S52
3.79
680
22
40
S25
2.30
2200
35
35
S54
5.76
1500
22
50
S27
4.60
680
25
30
S33
2.70
2200
35
40
S55
5.97
1500
25
40
S35
4.41
680
25
35
S34
2.30
2200
35
45
S56
4.80
3300
35
50
S57
7.92
1500
25
50
S37
4.80
680
30
20
S41
2.33
1500
30
30
S43
4.33
680
30
25
S42
2.86
(Note) Rated ripple current : 85℃ , 120Hz ; ESR. : 20℃ , 120Hz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
LA5, LT5
LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS
Standard Ratings
Rated
Rated
voltage capacitance
(V)
(µF)
200
Case(mm)
D
L
Casing
Symbol
Rated ripple
current
(Arms)
Rated
Rated
voltage capacitance
(V)
(µF)
Case(mm)
D
L
Casing
Symbol
Rated ripple
current
(Arms)
Rated
Rated
voltage capacitance
(V)
(µF)
Case(mm)
D
L
Casing
Symbol
Rated ripple
current
(Arms)
180
22
20
S21
1.00
1500
35
30
S53
4.56
680
35
25
S52
2.85
220
22
20
S21
1.34
1500
35
35
S54
4.75
680
35
30
S53
2.60
270
22
20
S21
1.41
1500
35
40
S55
3.90
820
22
50
S27
3.40
270
22
25
S22
1.30
1800
30
45
S46
5.35
820
25
40
S35
3.26
270
25
20
S31
1.47
330
22
25
S22
1.77
200
1800
35
35
S54
5.20
820
25
45
S36
3.42
1800
35
45
S56
4.40
820
30
30
S43
3.20
330
25
20
S31
1.62
2200
30
50
S47
6.16
820
30
35
S44
3.34
390
22
25
S22
1.92
2200
35
40
S55
5.97
820
30
40
S45
2.90
390
22
30
S23
1.60
2200
35
45
S56
6.20
820
35
25
S52
3.13
390
25
20
S31
1.69
2200
35
50
S57
5.00
820
35
30
S53
3.36
390
25
25
S32
2.03
2700
35
45
S56
6.87
820
35
35
S54
2.90
390
30
20
S41
1.70
150
22
20
S21
1.10
1000
25
50
S37
3.92
470
22
25
S22
2.11
180
22
20
S21
1.15
1000
30
35
S44
3.69
470
22
30
S23
2.23
180
25
20
S31
1.20
1000
30
40
S45
3.83
470
22
35
S24
1.90
220
22
20
S21
1.24
470
25
25
S32
2.23
220
22
25
S22
1.44
250
1000
30
45
S46
3.30
1000
35
30
S53
3.72
470
30
20
S41
1.94
220
25
20
S31
1.33
1000
35
35
S54
3.88
560
22
30
S23
2.43
270
22
25
S22
1.60
1000
35
40
S55
3.30
560
22
35
S24
2.44
270
22
30
S23
1.40
1200
30
40
S45
4.20
560
22
40
S25
2.10
270
25
20
S31
1.40
1200
30
45
S46
4.38
560
25
25
S32
2.43
270
25
25
S32
1.40
1200
30
50
S47
3.70
560
25
30
S33
2.45
270
30
20
S41
1.40
1200
35
35
S54
4.25
3.70
560
30
20
S41
2.11
330
22
25
S22
1.77
1200
35
45
S56
560
30
25
S42
2.10
330
22
30
S23
1.87
1500
30
50
S47
5.08
560
35
20
S51
2.20
330
22
35
S24
1.60
1500
35
40
S55
4.93
680
22
35
S24
2.69
330
25
25
S32
1.87
1500
35
50
S57
4.20
680
22
45
S26
2.40
330
30
20
S41
1.63
1800
35
45
S56
5.62
680
25
30
S33
2.70
390
22
30
S23
2.03
1800
35
50
S57
5.85
680
25
35
S34
2.86
390
22
35
S24
2.04
2200
35
50
S57
6.47
680
30
25
S42
2.86
390
22
40
S25
1.80
100
22
20
S21
0.90
680
35
20
S51
2.42
390
25
25
S32
2.03
120
22
20
S21
0.94
820
22
40
S25
3.11
390
25
30
S33
2.04
120
25
20
S31
0.88
820
22
50
S27
2.60
390
30
20
S41
1.77
150
22
20
S21
1.02
820
25
35
S34
3.14
820
25
40
S35
2.60
250
390
30
25
S42
1.80
150
22
25
S22
1.20
390
35
20
S51
1.84
150
25
20
S31
1.10
820
30
25
S42
3.00
470
22
35
S24
2.24
180
22
25
S22
1.31
820
30
30
S43
3.20
470
22
45
S26
2.00
180
22
30
S23
1.38
820
35
20
S51
2.66
470
25
30
S33
2.24
180
25
20
S31
1.15
820
35
25
S52
3.13
470
25
35
S34
2.00
180
25
25
S32
1.38
1000
22
45
S26
3.61
470
30
25
S42
2.37
180
30
20
S41
1.20
1000
25
40
S35
3.60
470
35
20
S51
2.02
220
22
25
S22
1.45
1000
25
50
S37
3.00
560
22
40
S25
2.57
1000
30
30
S43
3.53
560
22
50
S27
2.20
315
220
22
30
S23
1.53
220
22
35
S24
1.30
1000
30
35
S44
3.00
560
25
30
S33
2.44
220
25
20
S31
1.32
1000
35
25
S52
3.46
560
25
35
S34
2.60
220
25
25
S32
1.53
1000
35
30
S53
3.00
560
25
40
S35
2.20
220
30
20
S41
1.33
1200
22
50
S27
4.11
560
30
25
S42
2.48
270
22
30
S23
1.69
1200
25
45
S36
4.13
560
30
30
S43
2.64
270
22
35
S24
1.70
1200
30
35
S44
4.04
560
35
20
S51
2.20
270
22
40
S25
1.50
1.69
1200
30
40
S45
3.40
560
35
25
S52
2.59
270
25
25
S32
1200
35
25
S52
3.79
680
22
45
S26
2.98
270
25
30
S33
1.70
1200
35
30
S53
4.08
680
25
35
S34
2.86
270
30
20
S41
1.47
1200
35
35
S54
3.40
680
25
40
S35
2.97
270
30
25
S42
1.50
1500
25
50
S37
4.80
680
25
45
S36
2.50
270
35
20
S51
1.69
1500
30
40
S45
4.69
680
30
30
S43
2.91
330
22
35
S24
1.88
1500
30
50
S47
4.00
680
30
35
S44
2.60
330
22
40
S25
1.97
(Note) Rated ripple current : 85℃ , 120Hz ; ESR. : 20℃ , 120Hz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
LA5, LT5
LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS
Standard Ratings
Rated
Rated
voltage capacitance
(V)
(µF)
315
Case(mm)
D
L
Casing
Symbol
Rated ripple
current
(Arms)
330
22
45
S26
1.70
330
25
30
S33
1.88
Rated
Rated
voltage capacitance
(V)
(µF)
315
Case(mm)
D
L
Casing
Symbol
Rated ripple
current
(Arms)
Rated
Rated
voltage capacitance
(V)
(µF)
Case(mm)
D
L
Casing
Symbol
Rated ripple
current
(Arms)
1500
35
50
S57
5.34
390
25
50
S37
1.90
68
22
20
S21
0.61
390
30
30
S43
2.20
330
25
35
S34
1.96
82
22
20
S21
0.81
390
30
40
S45
1.90
330
30
20
S41
1.62
100
22
20
S21
0.85
390
35
25
S52
2.16
330
30
25
S42
1.99
100
22
25
S22
0.78
390
35
30
S53
1.90
330
35
20
S51
1.87
100
25
20
S31
0.77
470
22
50
S27
2.57
390
22
35
S24
2.04
120
22
20
S21
0.91
470
25
40
S35
2.47
390
22
40
S25
2.14
120
22
25
S22
1.07
470
25
45
S36
2.58
390
25
30
S33
2.04
120
25
20
S31
0.97
470
30
30
S43
2.42
390
25
35
S34
2.14
150
22
25
S22
1.20
470
30
35
S44
2.53
390
25
40
S35
1.80
150
22
30
S23
1.26
470
30
45
S46
2.10
390
30
25
S42
2.08
150
25
20
S31
1.09
470
35
25
S52
2.37
390
30
30
S43
2.20
150
25
25
S32
0.99
470
35
30
S53
2.55
390
35
25
S52
2.16
150
30
20
S41
1.00
470
35
35
S54
2.20
470
22
40
S25
2.35
180
22
25
S22
1.31
560
25
45
S36
2.82
470
22
45
S26
2.48
180
22
30
S23
1.37
560
25
50
S37
2.93
470
25
35
S34
2.34
180
22
35
S24
1.10
470
25
40
S35
2.46
180
25
20
S31
1.15
350
560
30
35
S44
2.76
560
30
40
S45
2.87
470
25
50
S37
2.10
180
25
25
S32
1.38
560
30
50
S47
2.40
470
30
25
S42
2.23
180
25
30
S33
1.10
560
35
30
S53
2.79
470
30
30
S43
2.42
180
30
20
S41
1.20
560
35
35
S54
2.90
470
30
35
S44
2.10
180
35
20
S51
1.20
560
35
40
S55
2.50
3.16
470
35
25
S52
2.37
220
22
30
S23
1.52
680
30
40
S45
470
35
30
S53
2.55
220
22
35
S24
1.53
680
30
45
S46
3.30
560
22
45
S26
2.70
220
22
40
S25
1.30
680
35
30
S53
3.07
560
22
50
S27
2.81
220
25
25
S32
1.53
680
35
35
S54
3.20
560
25
40
S35
2.69
220
25
30
S33
1.54
680
35
45
S56
2.80
560
25
50
S37
2.93
560
30
30
S43
2.64
350
220
25
35
S34
1.30
820
30
45
S46
3.62
220
30
20
S41
1.33
820
30
50
S47
3.76
560
30
35
S44
2.76
220
30
25
S42
1.30
820
35
35
S54
3.51
560
30
40
S45
2.40
220
35
20
S51
1.38
820
35
40
S55
3.65
560
35
25
S52
2.59
270
22
35
S24
1.70
1000
35
40
S55
4.03
560
35
30
S53
2.79
270
22
40
S25
1.78
1000
35
45
S56
4.18
560
35
35
S54
2.50
270
22
50
S27
1.50
1200
35
50
S57
4.78
680
25
45
S36
3.11
270
25
25
S32
1.69
56
22
20
S21
0.54
680
25
50
S37
3.23
270
25
30
S33
1.70
82
22
20
S21
0.82
680
30
35
S44
3.04
270
25
40
S35
1.50
82
22
25
S22
0.69
680
30
40
S45
3.16
270
30
20
S41
1.47
82
25
20
S31
0.69
680
30
45
S46
2.70
270
30
25
S42
1.71
100
22
20
S21
0.91
680
35
30
S53
3.07
270
30
30
S43
1.50
100
22
25
S22
1.07
680
35
35
S54
3.20
270
35
20
S51
1.53
100
25
20
S31
0.99
680
35
40
S55
2.80
270
35
25
S52
1.60
120
22
25
S22
1.17
820
25
50
S37
3.55
330
22
40
S25
1.97
120
22
30
S23
0.86
820
30
40
S45
3.47
330
22
50
S27
2.15
120
25
20
S31
1.03
820
30
45
S46
3.62
330
25
30
S33
1.88
120
25
25
S32
0.87
820
35
35
S54
3.51
330
25
35
S34
2.00
820
35
40
S55
3.65
330
25
45
S36
1.70
400
120
30
20
S41
0.93
150
22
25
S22
1.31
820
35
45
S56
3.10
330
30
25
S42
1.85
150
22
30
S23
1.35
1000
30
45
S46
4.00
330
30
30
S43
2.03
150
22
35
S24
1.00
1.20
1000
30
50
S47
4.16
330
30
35
S44
1.70
150
25
20
S31
1000
35
40
S55
4.03
330
35
20
S51
1.69
150
25
25
S32
1.35
1000
35
45
S56
4.20
330
35
25
S52
1.99
150
25
30
S33
1.00
1000
35
50
S57
3.50
390
22
45
S26
2.26
150
30
20
S41
1.21
1200
30
50
S47
4.56
390
22
50
S27
2.34
150
35
20
S51
1.20
1200
35
45
S56
4.60
390
25
35
S34
2.17
180
22
30
S23
1.52
1200
35
50
S57
4.78
390
25
40
S35
2.25
180
22
35
S24
1.53
(Note) Rated ripple current : 85℃ , 120Hz ; ESR. : 20℃ , 120Hz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
LA5, LT5
LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS
Standard Ratings
Rated
Rated
voltage capacitance
(V)
(µF)
400
Case(mm)
D
L
Casing
Symbol
Rated ripple
current
(Arms)
Rated
Rated
voltage capacitance
(V)
(µF)
Case(mm)
D
L
Casing
Symbol
Rated ripple
current
(Arms)
Rated
Rated
voltage capacitance
(V)
(µF)
Case(mm)
D
L
Casing
Symbol
Rated ripple
current
(Arms)
180
22
40
S25
1.10
470
35
30
S53
2.80
180
25
40
S35
1.20
180
25
25
S32
1.52
470
35
35
S54
2.93
180
30
25
S42
1.58
180
25
30
S33
1.53
470
35
40
S55
2.30
180
30
30
S43
1.20
180
25
35
S34
1.10
560
30
40
S45
3.15
180
35
20
S51
1.37
180
30
20
S41
1.32
560
30
45
S46
3.29
180
35
25
S52
1.30
180
30
25
S42
1.20
560
35
30
S53
3.06
220
22
40
S25
1.77
180
35
20
S51
1.37
560
35
35
S54
3.19
220
25
30
S33
1.69
220
22
30
S23
1.68
560
35
45
S56
2.60
220
25
35
S34
1.79
220
22
35
S24
1.69
220
22
45
S26
1.30
400
680
30
45
S46
3.63
220
25
50
S37
1.40
680
30
50
S47
3.77
220
30
25
S42
1.68
220
25
25
S32
1.68
680
35
35
S54
3.52
220
30
30
S43
1.82
220
25
30
S33
1.69
680
35
40
S55
3.65
220
30
35
S44
1.40
220
25
40
S35
1.30
680
35
50
S57
2.90
220
35
20
S51
1.52
220
30
20
S41
1.46
820
35
40
S55
4.01
220
35
25
S52
1.79
220
30
25
S42
1.70
820
35
45
S56
4.17
220
35
30
S53
1.50
220
30
30
S43
1.40
1000
35
45
S56
4.60
270
22
45
S26
2.07
220
35
20
S51
1.52
1000
35
50
S57
4.80
270
25
35
S34
1.98
220
35
25
S52
1.50
47
22
20
S21
0.49
270
25
40
S35
2.05
270
22
35
S24
1.87
56
25
20
S31
0.57
270
30
30
S43
2.02
270
22
40
S25
1.96
68
22
20
S21
0.82
270
30
35
S44
2.11
270
22
45
S26
2.06
68
22
25
S22
0.62
270
30
40
S45
1.60
270
25
30
S33
1.87
82
22
20
S21
0.85
270
35
25
S52
1.98
2.13
270
25
35
S34
1.98
82
22
25
S22
0.97
270
35
30
S53
270
25
45
S36
1.50
82
22
30
S23
0.71
270
35
35
S54
1.70
270
30
25
S42
1.84
82
25
20
S31
0.87
330
22
50
S27
2.37
270
30
30
S43
2.02
82
25
25
S32
0.72
270
30
35
S44
1.60
82
30
20
S41
0.77
450
330
25
40
S35
2.27
330
25
45
S36
2.38
270
35
20
S51
1.68
100
22
25
S22
1.07
330
30
30
S43
2.23
270
35
25
S52
1.98
100
22
35
S24
0.82
330
30
35
S44
2.34
330
22
40
S25
2.17
100
25
20
S31
0.92
330
30
50
S47
1.80
330
22
45
S26
2.28
100
30
20
S41
0.98
330
35
25
S52
2.19
330
25
35
S34
2.19
120
22
25
S22
1.17
330
35
30
S53
2.35
330
25
40
S35
2.27
120
22
30
S23
1.23
330
35
40
S55
1.90
330
25
50
S37
1.70
120
22
40
S25
0.92
390
25
45
S36
2.59
330
30
25
S42
2.01
120
25
20
S31
0.99
390
25
50
S37
2.69
330
30
30
S43
2.24
330
30
40
S45
1.80
450
120
25
25
S32
1.24
390
30
35
S44
2.54
120
25
30
S33
0.91
390
30
40
S45
2.63
330
35
25
S52
2.19
120
30
20
S41
1.07
390
35
30
S53
2.56
330
35
30
S53
1.80
120
30
25
S42
0.97
390
35
35
S54
2.66
390
22
50
S27
2.58
120
35
20
S51
1.00
390
35
45
S56
2.20
390
25
40
S35
2.47
150
22
30
S23
1.38
470
30
40
S45
2.89
390
25
45
S36
2.59
150
22
35
S24
1.42
470
30
45
S46
3.01
390
30
30
S43
2.43
150
22
45
S26
1.10
470
35
35
S54
2.92
390
30
35
S44
2.53
150
25
25
S32
1.39
470
35
40
S55
3.03
390
30
45
S46
2.00
150
25
30
S33
1.40
470
35
50
S57
2.40
390
35
25
S52
2.38
150
25
35
S34
1.00
560
30
45
S46
3.29
390
35
30
S53
2.55
150
30
20
S41
1.20
560
30
50
S47
3.42
390
35
35
S54
2.10
150
30
25
S42
1.48
560
35
35
S54
3.19
470
25
45
S36
2.84
150
35
20
S51
1.26
560
35
40
S55
3.31
3.80
470
25
50
S37
2.96
180
22
35
S24
1.56
680
35
45
S56
470
30
35
S44
2.78
180
22
50
S27
1.20
680
35
50
S57
3.95
470
30
40
S45
2.89
180
25
25
S32
1.52
820
35
50
S57
4.34
470
30
50
S47
2.20
180
25
30
S33
1.53
(Note) Rated ripple current : 85℃ , 120Hz ; ESR. : 20℃ , 120Hz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
LAH, LTH
LAH
LARGE CAPACITANCE
ALUMINUM ELECTROLYTIC
LARGE CAPACITANCE
ALUMINUM ELECTROLYTIC
CAPACITORSCAPACITORS
GREEN
CAP
Miniaturized,High-Reliability,High-Ripple Capacitors
●
●
105˚C
2000hours
High-reliability, high-ripple capacitors.
Guarantees 2000 hours at 105℃.
Miniaturized
LAH
LAG
Marking color : White print on a black sleeve
Specifications
Performance
−40 to +105 (−25 to +105 at 160V or more)
± 20
Item
Category temperature range (°
C)
Tolerance at rated capacitance (%)
Leakage current (µA)
(max.)
(20℃,120Hz)
3√ ̄
CV (after 5 minutes) C : Rated capacitance (µF) ; V : Rated voltage (V)
Rated voltage (V)
tanδ (max.)
Tangent of loss angle
(tanδ)
16
0.50
25
0.40
35
0.35
50
0.30
(20℃)
63 to 100 160 to 250 400 to 450
0.20
0.15
0.20
(20℃,120Hz)
Characteristics at high
and low temperature
Rated voltage (V)
Impedance ratio
Z−25℃/Z+20℃
(max.)
Z−40℃/Z+20℃
Endurance (105℃)
(Applied ripple current)
Test time
Leakage current
Percentage of capacitance change
Tangent of the loss angle
2000 hours
The initial specified value or less
Within ±20% of initial value
200% or less of the initial specified value
Test time
Leakage current
Percentage of capacitance change
Tangent of the loss angle
1000 hours
The initial specified value or less
Within ±15% of initial value
150% or less of the initial specified value
Shelf life (105℃)
16 to 100
4
15
160 to 200
4
̶
250 to 400
4
̶
(120Hz)
Voltage application treatment : According to JIS C5101-4 4.1
Applicable standards
JIS C5101 - 1,
- 4 (IEC 60384 - 1,
- 4)
Outline Drawing
Unit: mm
2‒φ2
Sleeve
10
0.
±
10
Lug terminal details
Thickness : 0.8t
0.85±0.15
4.0±0.5
Vent
(5.4)
(0.9)
(2.1)
(‒) Negative terminal indicated by
cross notching
L+2max.
(4.7)
φD+1/0
1
+0.2
1.5
−0.1
Markings
Position of PC board holes
( ) : Reference size
3.3±0.1
Three terminals type
10±0.1
φ2.5
2−φ2
4.75±0.1
Coefficient of Frequency for Rated Ripple Current
Part numbering system
Frequency (Hz)
Rated voltage (V)
series LAH, standard terminal type :400V330µF
LAH
̶
400
V
Rated voltage
symbol
Series code
331
M
S54
Rated capacitance
symbol
Capacitance
tolerance symbol
Casing
symbol
331
M
S54
Rated capacitance
symbol
Capacitance
tolerance symbol
Casing
symbol
# B
Optional
symbol
100 or less
160 to 250
400 or more
50
120
1k
10k
30k
0.95
0.81
0.77
1
1
1
1.10
1.32
1.30
1.15
1.45
1.41
1.15
1.50
1.43
series LTH, three terminals type :400V330µF
LTH
Series code
̶
400
Rated voltage
symbol
V
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
# B
Optional
symbol
CAT.No.2021/2022E
LAH, LTH
LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS
Standard Ratings
Rated
Rated
voltage capacitance
(V)
(µF)
16
Case(mm)
D
L
Casing
Symbol
Rated ripple
current
(Arms)
Rated
Rated
voltage capacitance
(V)
(µF)
Case(mm)
D
L
Casing
Symbol
Rated ripple
current
(Arms)
Rated
Rated
voltage capacitance
(V)
(µF)
Case(mm)
D
L
Casing
Symbol
Rated ripple
current
(Arms)
4700
22
20
S21
1.23
27000
35
25
S52
3.80
10000
30
25
S42
2.48
5600
22
20
S21
1.35
27000
35
30
S53
3.82
10000
35
20
S51
2.40
6800
22
20
S21
1.48
33000
22
50
S27
4.00
12000
22
35
S24
2.59
6800
22
25
S22
1.60
33000
25
45
S36
4.16
12000
22
40
S25
2.63
6800
25
20
S31
1.53
33000
25
50
S37
4.21
12000
22
45
S26
2.69
8200
22
25
S22
1.76
33000
30
35
S44
4.15
12000
25
30
S33
2.61
8200
25
20
S31
1.68
33000
30
40
S45
4.23
12000
25
35
S34
2.67
8200
30
20
S41
1.84
33000
30
45
S46
4.30
12000
25
40
S35
2.74
10000
22
25
S22
1.94
33000
35
30
S53
4.22
12000
30
25
S42
2.59
10000
22
30
S23
1.99
33000
35
35
S54
4.24
12000
30
30
S43
2.70
10000
25
20
S31
1.85
39000
25
50
S37
4.58
12000
35
20
S51
2.63
10000
25
25
S32
1.99
39000
30
40
S45
4.60
12000
35
25
S52
2.80
10000
30
20
S41
2.03
39000
30
45
S46
4.67
15000
22
40
S25
2.94
12000
22
30
S23
2.18
39000
30
50
S47
4.74
15000
22
45
S26
3.01
12000
22
35
S24
2.28
12000
25
25
S32
2.18
16
39000
35
30
S53
4.59
15000
25
35
S34
2.99
39000
35
35
S54
4.61
15000
25
40
S35
3.06
12000
25
30
S33
2.30
39000
35
40
S55
4.72
15000
25
45
S36
3.15
12000
30
20
S41
2.23
47000
30
45
S46
5.13
15000
30
30
S43
3.02
12000
30
25
S42
2.38
47000
30
50
S47
5.20
15000
30
35
S44
3.13
12000
35
20
S51
2.38
47000
35
35
S54
5.06
15000
35
25
S52
3.13
15000
22
30
S23
2.44
47000
35
40
S55
5.18
15000
35
30
S53
3.22
15000
22
35
S24
2.55
47000
35
45
S56
5.27
18000
22
45
S26
3.29
3.44
15000
22
40
S25
2.64
56000
30
50
S47
5.68
18000
22
50
S27
15000
25
25
S32
2.44
56000
35
40
S55
5.66
18000
25
40
S35
3.36
15000
25
30
S33
2.57
56000
35
45
S56
5.75
18000
25
45
S36
3.45
15000
25
35
S34
2.68
68000
35
45
S56
6.34
18000
25
50
S37
3.54
15000
30
25
S42
2.66
68000
35
50
S57
6.59
18000
30
30
S43
3.31
15000
35
20
S51
2.66
82000
35
50
S57
7.23
18000
22
35
S24
2.79
3300
22
20
S21
1.21
25
18000
30
35
S44
3.43
18000
30
40
S45
3.54
18000
22
40
S25
2.89
3900
22
20
S21
1.31
18000
35
25
S52
3.43
18000
22
45
S26
2.98
4700
22
20
S21
1.44
18000
35
30
S53
3.53
18000
25
30
S33
2.82
4700
22
25
S22
1.55
22000
22
50
S27
3.80
18000
25
35
S34
2.94
4700
25
20
S31
1.48
22000
25
45
S36
3.81
18000
25
40
S35
3.04
5600
22
25
S22
1.69
22000
25
50
S37
3.91
18000
30
25
S42
2.91
5600
25
20
S31
1.61
22000
30
35
S44
3.79
18000
30
30
S43
3.00
5600
30
20
S41
1.74
22000
30
40
S45
3.91
18000
35
20
S51
2.91
6800
22
25
S22
1.86
22000
30
45
S46
4.24
18000
35
25
S52
3.10
6800
22
30
S23
1.91
22000
35
30
S53
3.90
22000
22
40
S25
3.20
6800
25
20
S31
1.78
22000
35
35
S54
3.96
22000
22
45
S26
3.29
6800
25
25
S32
1.91
27000
25
50
S37
4.34
22000
25
35
S34
3.25
6800
30
20
S41
1.92
27000
30
40
S45
4.34
22000
25
40
S35
3.36
22000
25
45
S36
3.40
25
8200
22
30
S23
2.10
27000
30
45
S46
4.70
8200
22
35
S24
2.14
27000
35
35
S54
4.39
22000
30
30
S43
3.32
8200
25
25
S32
2.10
27000
35
40
S55
4.56
22000
30
35
S44
3.39
8200
25
30
S33
2.16
27000
35
45
S56
4.75
22000
35
25
S52
3.43
8200
30
20
S41
2.10
33000
30
45
S46
5.19
27000
22
45
S26
3.65
8200
30
25
S42
2.25
33000
30
50
S47
5.30
27000
22
50
S27
3.70
8200
35
20
S51
2.17
33000
35
35
S54
4.85
27000
25
40
S35
3.72
10000
22
30
S23
2.32
33000
35
40
S55
5.04
5.39
27000
25
45
S36
3.77
10000
22
35
S24
2.36
33000
35
50
S57
27000
25
50
S37
3.81
10000
22
40
S25
2.40
39000
30
50
S47
5.58
27000
30
30
S43
3.67
10000
25
25
S32
2.32
39000
35
40
S55
5.48
27000
30
35
S44
3.76
10000
25
30
S33
2.39
39000
35
45
S56
5.71
27000
30
40
S45
3.83
10000
25
35
S34
2.44
47000
35
50
S57
6.43
(Note) Rated ripple current : 105℃ , 120Hz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
LAH, LTH
LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS
Standard Ratings
Rated
Rated
voltage capacitance
(V)
(µF)
35
Case(mm)
D
L
Casing
Symbol
Rated ripple
current
(Arms)
Rated
Rated
voltage capacitance
(V)
(µF)
Case(mm)
D
L
Casing
Symbol
Rated ripple
current
(Arms)
Rated
Rated
voltage capacitance
(V)
(µF)
Case(mm)
D
L
Casing
Symbol
Rated ripple
current
(Arms)
2200
22
20
S21
1.08
12000
35
25
S52
3.14
4700
22
45
S26
2.56
2700
22
20
S21
1.20
12000
35
30
S53
3.20
4700
25
30
S33
2.39
3300
22
20
S21
1.33
15000
25
45
S36
3.58
4700
25
35
S34
2.50
3300
22
25
S22
1.43
15000
25
50
S37
3.64
4700
30
25
S42
2.44
3300
25
20
S31
1.39
15000
30
35
S44
3.58
4700
30
30
S43
2.58
3900
22
25
S22
1.55
15000
30
40
S45
3.67
4700
35
20
S51
2.51
3900
22
30
S23
1.65
15000
30
45
S46
3.74
4700
35
25
S52
2.67
3900
25
20
S31
1.51
15000
35
30
S53
3.58
5600
22
40
S25
2.70
3900
30
20
S41
1.65
15000
35
35
S54
3.69
5600
22
45
S26
2.79
4700
22
25
S22
1.71
18000
25
50
S37
3.99
5600
22
50
S27
2.89
4700
22
30
S23
1.81
18000
30
40
S45
4.02
5600
25
35
S34
2.73
4700
25
20
S31
1.66
18000
30
45
S46
4.10
5600
25
40
S35
2.81
4700
25
25
S32
1.78
4700
30
20
S41
1.82
35
18000
35
30
S53
3.92
5600
30
25
S42
2.66
18000
35
35
S54
4.04
5600
30
30
S43
2.82
5600
22
30
S23
1.98
18000
35
40
S55
4.16
5600
30
35
S44
2.95
5600
22
35
S24
2.02
22000
30
45
S46
4.53
5600
35
25
S52
2.91
5600
25
25
S32
1.94
22000
30
50
S47
4.71
6800
22
45
S26
3.08
5600
25
30
S33
2.04
22000
35
35
S54
4.47
6800
22
50
S27
3.18
5600
30
20
S41
1.98
22000
35
40
S55
4.60
6800
25
40
S35
3.10
5600
30
25
S42
2.12
22000
35
50
S57
4.92
6800
25
45
S36
3.24
5600
35
20
S51
2.16
27000
30
50
S47
5.22
6800
25
50
S37
3.37
6800
22
35
S24
2.23
27000
35
40
S55
5.09
6800
30
30
S43
3.10
3.25
6800
22
40
S25
2.28
27000
35
45
S56
5.24
6800
30
35
S44
6800
25
25
S32
2.14
33000
35
45
S56
5.80
6800
30
40
S45
3.39
6800
25
30
S33
2.25
33000
35
50
S57
6.03
6800
35
25
S52
3.21
6800
25
35
S34
2.31
1200
22
20
S21
0.99
6800
30
25
S42
2.34
1500
22
20
S21
1.11
50
6800
35
30
S53
3.31
8200
22
50
S27
3.50
6800
35
20
S51
2.38
1800
22
20
S21
1.22
8200
25
40
S35
3.40
8200
22
35
S24
2.44
1800
22
25
S22
1.31
8200
25
45
S36
3.56
8200
22
40
S25
2.50
1800
25
20
S31
1.29
8200
30
35
S44
3.57
8200
22
50
S27
2.67
2200
22
25
S22
1.45
8200
30
40
S45
3.72
8200
25
30
S33
2.47
2200
25
20
S31
1.43
8200
30
45
S46
3.89
8200
25
35
S34
2.54
2700
22
25
S22
1.60
8200
35
30
S53
3.63
8200
25
40
S35
2.60
2700
22
30
S23
1.70
8200
35
35
S54
3.66
8200
30
25
S42
2.45
2700
25
20
S31
1.58
10000
25
45
S36
3.93
8200
30
30
S43
2.56
2700
25
25
S32
1.70
10000
25
50
S37
4.09
8200
35
20
S51
2.61
2700
30
20
S41
1.73
10000
30
40
S45
3.90
8200
35
25
S52
2.78
3300
22
30
S23
1.88
10000
30
45
S46
4.00
10000
22
40
S25
2.76
3300
22
35
S24
1.98
10000
30
50
S47
4.09
10000
22
45
S26
2.83
10000
25
35
S34
2.80
50
3300
25
25
S32
1.88
10000
35
30
S53
4.01
3300
25
30
S33
2.00
10000
35
35
S54
4.05
10000
25
40
S35
2.87
3300
30
20
S41
1.91
10000
35
40
S55
4.07
10000
25
45
S36
2.92
3300
35
20
S51
2.10
12000
30
45
S46
4.30
10000
30
30
S43
2.83
3900
22
30
S23
2.04
12000
30
50
S47
4.68
10000
30
35
S44
2.92
3900
22
35
S24
2.15
12000
35
35
S54
4.43
10000
35
25
S52
3.07
3900
22
40
S25
2.25
12000
35
40
S55
4.46
12000
22
45
S26
3.09
3900
25
25
S32
2.04
12000
35
45
S56
4.50
12000
22
50
S27
3.23
3900
25
30
S33
2.17
15000
30
50
S47
4.95
12000
25
40
S35
3.15
3900
25
35
S34
2.28
15000
35
40
S55
4.98
5.03
12000
25
45
S36
3.20
3900
30
20
S41
2.08
15000
35
45
S56
12000
25
50
S37
3.26
3900
30
25
S42
2.22
18000
35
45
S56
5.51
12000
30
30
S43
3.10
3900
35
20
S51
2.28
18000
35
50
S57
5.73
22000
35
50
S57
6.33
12000
30
35
S44
3.20
4700
22
35
S24
2.36
12000
30
40
S45
3.28
4700
22
40
S25
2.47
(Note) Rated ripple current : 105℃ , 120Hz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
LAH, LTH
LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS
Standard Ratings
Rated
Rated
voltage capacitance
(V)
(µF)
63
Case(mm)
D
L
Casing
Symbol
Rated ripple
current
(Arms)
Rated
Rated
voltage capacitance
(V)
(µF)
Case(mm)
D
L
Casing
Symbol
Rated ripple
current
(Arms)
Rated
Rated
voltage capacitance
(V)
(µF)
Case(mm)
D
L
Casing
Symbol
Rated ripple
current
(Arms)
820
22
20
S21
0.96
4700
35
30
S53
2.83
2200
22
45
S26
2.09
1000
22
20
S21
1.06
5600
25
45
S36
3.04
2200
25
30
S33
1.96
1200
22
20
S21
1.11
5600
25
50
S37
3.14
2200
25
35
S34
2.01
1200
22
25
S22
1.25
5600
30
35
S44
3.06
2200
30
25
S42
2.00
1200
25
20
S31
1.16
5600
30
40
S45
3.17
2200
30
30
S43
2.10
1500
22
25
S22
1.40
5600
30
45
S46
3.28
2200
35
20
S51
2.04
1500
25
20
S31
1.29
5600
35
30
S53
3.09
2200
35
25
S52
2.17
1800
22
25
S22
1.46
5600
35
35
S54
3.24
2700
22
40
S25
2.24
1800
22
30
S23
1.60
6800
25
50
S37
3.46
2700
22
45
S26
2.32
1800
25
20
S31
1.42
6800
30
40
S45
3.49
2700
25
35
S34
2.23
1800
25
25
S32
1.52
6800
30
45
S46
3.61
2700
25
40
S35
2.32
1800
30
20
S41
1.47
6800
30
50
S47
3.73
2700
25
45
S36
2.43
2200
22
30
S23
1.68
2200
22
35
S24
1.73
63
6800
35
30
S53
3.40
2700
30
25
S42
2.22
6800
35
35
S54
3.57
2700
30
30
S43
2.33
2200
25
25
S32
1.68
6800
35
40
S55
3.71
2700
30
35
S44
2.43
2200
25
30
S33
1.75
8200
30
45
S46
3.97
2700
35
25
S52
2.40
2200
30
20
S41
1.63
8200
30
50
S47
4.10
3300
22
45
S26
2.56
2200
35
20
S51
1.85
8200
35
35
S54
3.92
3300
22
50
S27
2.67
2700
22
30
S23
1.86
8200
35
40
S55
4.07
3300
25
35
S34
2.46
2700
22
35
S24
1.92
8200
35
45
S56
4.16
3300
25
40
S35
2.57
2700
22
40
S25
1.97
10000
30
50
S47
4.52
3300
25
50
S37
2.76
2700
25
25
S32
1.86
10000
35
40
S55
4.50
3300
30
30
S43
2.57
2.69
2700
25
30
S33
1.94
10000
35
45
S56
4.59
3300
30
35
S44
2700
25
35
S34
1.99
10000
35
50
S57
4.69
3300
30
40
S45
2.78
2700
30
20
S41
1.81
12000
35
45
S56
5.03
3300
35
25
S52
2.66
2700
30
25
S42
1.93
12000
35
50
S57
5.14
3300
35
30
S53
2.71
2700
35
20
S51
2.05
15000
35
50
S57
5.74
3900
22
50
S27
2.90
3300
22
35
S24
2.12
560
22
20
S21
0.85
3300
22
40
S25
2.18
680
22
20
S21
0.94
80
3900
25
40
S35
2.79
3900
25
45
S36
2.92
3300
22
50
S27
2.32
820
22
20
S21
1.03
3900
25
50
S37
3.00
3300
25
30
S33
2.14
820
22
25
S22
1.11
3900
30
35
S44
2.92
3300
25
35
S34
2.20
820
25
20
S31
1.07
3900
30
40
S45
3.02
3300
25
40
S35
2.27
1000
22
25
S22
1.23
3900
30
45
S46
3.12
3300
30
25
S42
2.13
1000
25
20
S31
1.18
3900
35
30
S53
2.95
3300
30
30
S43
2.24
1200
22
25
S22
1.34
3900
35
35
S54
3.07
3300
35
20
S51
2.26
1200
22
30
S23
1.39
4700
25
50
S37
3.29
3300
35
25
S52
2.41
1200
25
20
S31
1.29
4700
30
40
S45
3.32
3900
22
40
S25
2.37
1200
25
25
S32
1.39
4700
30
45
S46
3.43
3900
22
45
S26
2.42
1200
30
20
S41
1.38
4700
30
50
S47
3.56
3900
25
35
S34
2.39
1500
22
30
S23
1.55
4700
35
30
S53
3.23
3900
25
40
S35
2.47
1500
22
35
S24
1.61
4700
35
35
S54
3.37
3900
25
45
S36
2.54
3900
30
25
S42
2.32
80
1500
25
25
S32
1.55
4700
35
40
S55
3.50
1500
25
30
S33
1.62
5600
30
45
S46
3.74
3900
30
30
S43
2.44
1500
30
20
S41
1.55
5600
30
50
S47
3.89
3900
30
35
S44
2.55
1500
35
20
S51
1.68
5600
35
35
S54
3.68
3900
35
25
S52
2.62
1800
22
30
S23
1.70
5600
35
40
S55
3.82
4700
22
45
S26
2.65
1800
22
35
S24
1.76
5600
35
45
S56
3.87
4700
22
50
S27
2.77
1800
22
40
S25
1.83
6800
30
50
S47
4.03
4700
25
40
S35
2.71
1800
25
25
S32
1.70
6800
35
40
S55
3.93
4.03
4700
25
45
S36
2.79
1800
25
30
S33
1.77
6800
35
45
S56
4700
25
50
S37
2.88
1800
30
20
S41
1.69
6800
35
50
S57
4.19
4700
30
30
S43
2.67
1800
30
25
S42
1.81
8200
35
45
S56
4.32
4700
30
35
S44
2.80
1800
35
20
S51
1.84
8200
35
50
S57
4.60
4700
30
40
S45
2.90
2200
22
35
S24
1.95
10000
35
50
S57
5.08
4700
35
25
S52
2.72
2200
22
40
S25
2.02
12000
35
50
S57
5.14
(Note) Rated ripple current : 105℃ , 120Hz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
LAH, LTH
LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS
Standard Ratings
Rated
Rated
voltage capacitance
(V)
(µF)
100
Case(mm)
D
L
Casing
Symbol
Rated ripple
current
(Arms)
Rated
Rated
voltage capacitance
(V)
(µF)
Case(mm)
D
L
Casing
Symbol
Rated ripple
current
(Arms)
390
22
20
S21
0.83
1800
25
45
S36
2.28
470
22
20
S21
0.91
1800
30
25
S42
2.09
560
22
20
S21
0.99
1800
30
30
S43
2.19
560
22
25
S22
1.07
1800
30
35
S44
2.27
560
25
20
S31
1.04
1800
35
25
S52
2.27
680
22
25
S22
1.18
2200
22
45
S26
2.41
680
25
20
S31
1.14
2200
22
50
S27
2.52
820
22
25
S22
1.29
2200
25
40
S35
2.46
820
22
30
S23
1.35
2200
25
45
S36
2.52
820
25
20
S31
1.26
2200
25
50
S37
2.57
820
25
25
S32
1.35
2200
30
30
S43
2.42
820
30
20
S41
1.32
2200
30
35
S44
2.51
1000
22
30
S23
1.49
2200
30
40
S45
2.59
1000
22
35
S24
1.54
2200
35
25
S52
2.51
1000
25
25
S32
1.49
2200
35
30
S53
2.56
1000
25
30
S33
1.56
2700
25
45
S36
2.79
1000
30
20
S41
1.46
2700
25
50
S37
2.85
1000
35
20
S51
1.59
2700
30
35
S44
2.78
1200
22
30
S23
1.63
2700
30
40
S45
2.87
1200
22
35
S24
1.69
2700
30
45
S46
2.94
1200
22
40
S25
1.74
1200
25
25
S32
1.63
100
2700
35
30
S53
2.79
2700
35
35
S54
2.90
1200
25
30
S33
1.71
3300
25
50
S37
3.15
1200
25
35
S34
1.76
3300
30
40
S45
3.17
1200
30
20
S41
1.60
3300
30
45
S46
3.25
1200
30
25
S42
1.71
3300
30
50
S47
3.32
1200
35
20
S51
1.74
3300
35
30
S53
3.09
1500
22
35
S24
1.89
3300
35
35
S54
3.21
1500
22
40
S25
1.95
3300
35
40
S55
3.31
1500
22
45
S26
1.99
3900
30
45
S46
3.53
1500
25
30
S33
1.91
3900
30
50
S47
3.61
1500
25
35
S34
1.97
3900
35
35
S54
3.49
1500
25
40
S35
2.03
3900
35
40
S55
3.60
1500
30
25
S42
1.91
3900
35
45
S56
3.69
1500
30
30
S43
2.00
4700
30
50
S47
3.96
1500
35
20
S51
1.94
4700
35
40
S55
3.95
1500
35
25
S52
2.07
4700
35
45
S56
4.05
1800
22
40
S25
2.13
4700
35
50
S57
4.14
1800
22
45
S26
2.18
5600
35
45
S56
4.42
1800
25
35
S34
2.16
5600
35
50
S57
4.52
1800
25
40
S35
2.22
6800
35
50
S57
4.98
(Note) Rated ripple current : 105℃ , 120Hz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
LAH, LTH
LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS
Standard Ratings
Rated
Rated
voltage capacitance
(V)
(µF)
160
180
200
Case(mm)
D
L
Casing
Symbol
Rated ripple
current
(Arms)
Rated
Rated
voltage capacitance
(V)
(µF)
Case(mm)
D
L
Casing
Symbol
Rated ripple
current
(Arms)
Rated
Rated
voltage capacitance
(V)
(µF)
Case(mm)
D
L
Casing
Symbol
Rated ripple
current
(Arms)
330
22
25
S22
1.16
330
25
25
S32
1.35
120
22
35
S24
0.75
390
22
30
S23
1.43
390
22
35
S24
1.41
120
25
30
S33
0.70
470
22
35
S24
1.52
470
22
40
S25
1.50
120
30
25
S42
0.78
470
25
25
S32
1.55
470
25
30
S33
1.50
150
22
40
S25
0.82
560
22
40
S25
1.62
470
30
25
S42
1.56
150
25
35
S34
0.73
560
25
30
S33
1.73
560
22
45
S26
1.58
180
22
50
S27
0.78
680
22
45
S26
1.70
560
25
35
S34
1.65
180
25
40
S35
0.82
680
25
35
S34
1.81
680
22
50
S27
1.68
180
30
30
S43
0.83
680
30
25
S42
1.82
680
25
40
S35
1.80
180
35
25
S52
0.86
820
22
50
S27
1.81
680
30
30
S43
1.82
220
25
45
S36
0.87
820
25
40
S35
1.98
680
35
25
S52
1.96
820
30
30
S43
1.98
820
25
50
S37
1.87
200
400
220
30
35
S44
0.86
270
25
50
S37
0.94
820
35
25
S52
1.93
820
30
35
S44
1.99
270
30
40
S45
0.95
1000
25
45
S36
2.04
820
35
30
S53
2.07
270
35
30
S53
0.91
1000
30
35
S44
2.14
1000
30
45
S46
2.22
330
30
45
S46
1.11
1200
25
50
S37
2.12
1000
35
35
S54
2.22
330
35
35
S54
1.13
1200
30
40
S45
2.22
1200
30
50
S47
2.89
390
30
50
S47
1.15
1200
35
30
S53
2.74
1200
35
40
S55
2.42
390
35
40
S55
1.26
1500
30
45
S46
2.46
1500
35
45
S56
2.59
470
35
45
S56
1.31
1500
35
35
S54
2.53
1800
35
50
S57
2.70
560
35
50
S57
1.50
1800
35
45
S56
2.98
180
22
25
S22
0.94
56
22
25
S22
0.47
2200
35
50
S57
3.10
220
22
30
S23
1.10
68
22
30
S23
0.56
0.65
270
22
25
S22
1.08
220
25
25
S32
1.15
68
25
25
S32
330
22
30
S23
1.30
270
22
35
S24
1.13
82
22
35
S24
0.64
390
25
25
S32
1.35
330
22
40
S25
1.20
100
22
40
S25
0.70
470
22
35
S24
1.58
330
25
30
S33
1.35
100
25
30
S33
0.70
470
25
30
S33
1.62
330
30
25
S42
1.30
100
30
25
S42
0.78
560
22
40
S25
1.79
390
22
45
S26
1.26
120
22
45
S26
0.73
560
25
35
S34
1.69
390
25
35
S34
1.41
120
25
35
S34
0.73
560
30
25
S42
1.67
470
22
50
S27
1.37
150
22
50
S27
0.78
680
22
50
S27
1.76
470
25
40
S35
1.52
150
25
40
S35
0.82
680
25
40
S35
1.72
680
30
30
S43
1.74
250
470
30
30
S43
1.36
470
35
25
S52
1.40
450
150
30
30
S43
0.83
150
35
25
S52
0.86
680
35
25
S52
1.92
560
25
45
S36
1.59
180
25
45
S36
0.87
820
25
45
S36
1.78
560
30
35
S44
1.57
180
30
35
S44
0.86
820
30
35
S44
1.85
560
35
30
S53
1.56
220
25
50
S37
0.94
1000
25
50
S37
1.91
680
25
50
S37
2.20
220
30
40
S45
0.95
1000
30
40
S45
2.01
680
30
40
S45
1.76
220
35
30
S53
0.91
1000
35
30
S53
2.16
820
30
45
S46
1.83
270
30
45
S46
1.11
1200
30
45
S46
2.19
820
35
35
S54
2.35
270
35
35
S54
1.13
1200
35
35
S54
2.34
1000
30
50
S47
1.87
330
30
50
S47
1.15
1500
30
50
S47
2.36
1000
35
40
S55
2.90
330
35
40
S55
1.26
1500
35
40
S55
2.56
1200
35
45
S56
3.30
390
35
45
S56
1.31
470
35
50
S57
1.50
1800
35
45
S56
2.67
220
22
25
S22
1.08
330
22
30
S23
1.30
400
68
22
25
S22
0.47
82
22
30
S23
0.56
82
25
25
S32
0.65
(Note) Rated ripple current : 105℃ , 120Hz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
LAT, LTT
LAT
LARGE CAPACITANCE
ALUMINUM ELECTROLYTIC
LARGE CAPACITANCE
ALUMINUM ELECTROLYTIC
CAPACITORSCAPACITORS
Ultra Miniaturized,High-Reliability,High-Ripple Capacitors
●
●
●
GREEN
CAP
105˚C
2000hours
Best suited as input filters for various power supplies.
Guarantees 2000 hours at 105℃.
Best suited to On-Board-Charger for EV, PHEV.
Miniaturized, High ripple
LAT
LAH
Marking color : White print on a black sleeve
Specifications
Performance
−25 to +105
±20
Item
Category temperature range (°
C)
Tolerance at rated capacitance (%)
Leakage current (µA)
(max.)
(20℃,120Hz)
3√ ̄
CV (after 5 minutes) C : Rated capacitance (µF) ; V : Rated voltage (V)
Rated voltage (V)
tanδ (max.)
Tangent of loss angle
(tanδ)
(20℃)
160 to 250
0.15
315 to 500
0.20
(20℃,120Hz)
Percentage of capacitance change (%)
Characteristics at high
and low temperature
Impedance ratio (max.)
Within ±30% of the value at 20℃
4
ー25℃
Zー25℃/Z+20℃
(120Hz)
Endurance (105℃)
(Applied ripple current)
Shelf life (105℃)
Test time
Leakage current
Percentage of capacitance change
Tangent of the loss angle
2000 hours
The initial specified value or less
Within ±20% of initial value
200% or less of the initial specified value
Test time
Leakage current
Percentage of capacitance change
Tangent of the loss angle
1000 hours
The initial specified value or less
Within ±15% of initial value
150% or less of the initial specified value
Voltage application treatment : According to JIS C5101-4 4.1
Applicable standards
JIS C5101 - 1,
- 4 (IEC 60384 - 1,
- 4)
Outline Drawing
Unit : mm
2‒φ2
Sleeve
10
0.
±
10
Lug terminal details
Thickness : 0.8t
0.85±0.15
4.0±0.5
Vent
(5.4)
(0.9)
(2.1)
(‒) Negative terminal indicated by
cross notching
L+2max.
(4.7)
φD+1/0
1
+0.2
1.5
−0.1
Markings
Position of PC board holes
( ) : Reference size
3.3±0.1
Three terminals type
10±0.1
φ2.5
2−φ2
4.75±0.1
Coefficient of Frequency for Rated Ripple Current
Part numbering system
Frequency (Hz)
Rated voltage (V)
series LAT, standard terminal type :400V220µF
LAT
̶ 400 V
Series code
Rated voltage
symbol
221
Rated capacitance
symbol
M
Capacitance
tolerance symbol
S52 #
Casing
symbol
B
160 to 250
315 or more
50
120
1k
10k
30k
0.81
0.77
1
1
1.32
1.30
1.45
1.41
1.50
1.43
Optional
symbol
series LTT, three terminals type :400V220µF
LTT
̶ 400 V
Series code
Rated voltage
symbol
221
Rated capacitance
symbol
M
Capacitance
tolerance symbol
S52 #
Casing
symbol
B
Optional
symbol
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
LAT, LTT
LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS
Standard Ratings
Rated
Rated
voltage capacitance
(V)
(µF)
160
Case(mm)
D
L
Casing
Symbol
Rated ripple
current
(Arms)
Rated
Rated
voltage capacitance
(V)
(µF)
Case(mm)
D
L
Casing
Symbol
Rated ripple
current
(Arms)
Rated
Rated
voltage capacitance
(V)
(µF)
Case(mm)
D
L
Casing
Symbol
Rated ripple
current
(Arms)
220
22
20
S21
0.90
1200
25
45
S36
2.90
560
30
20
S41
1.64
270
22
20
S21
1.00
1200
30
30
S43
2.84
560
35
20
S51
1.66
270
25
20
S31
1.13
1200
30
35
S44
2.96
680
22
35
S24
1.90
330
22
20
S21
1.10
1200
35
25
S52
2.69
680
25
30
S33
1.91
330
25
20
S31
1.25
1500
22
60
S29
3.41
680
30
25
S42
1.86
390
22
25
S22
1.35
1500
25
45
S36
3.25
680
35
20
S51
1.83
390
25
20
S31
1.36
1500
25
50
S37
3.38
820
22
40
S25
2.17
390
30
20
S41
1.37
1500
30
35
S44
3.10
820
25
35
S34
2.14
470
22
25
S22
1.48
1500
30
40
S45
3.21
820
30
25
S42
2.04
470
22
30
S23
1.50
1500
35
30
S53
3.06
820
30
30
S43
2.17
470
25
25
S32
1.53
1800
25
55
S38
3.84
820
35
20
S51
2.01
470
30
20
S41
1.50
1800
30
40
S45
3.52
820
35
25
S52
2.11
560
22
30
S23
1.68
560
22
35
S24
1.75
160
1800
30
45
S46
3.91
1000
22
45
S26
2.44
1800
35
30
S53
3.35
1000
25
40
S35
2.43
560
25
25
S32
1.63
1800
35
35
S54
3.52
1000
30
30
S43
2.39
560
30
20
S41
1.63
2200
30
45
S46
4.03
1000
35
25
S52
2.33
560
35
20
S51
1.82
2200
30
50
S47
4.16
1200
22
50
S27
2.74
680
22
35
S24
1.93
2200
35
35
S54
3.89
1200
25
45
S36
2.73
680
22
40
S25
1.98
2200
35
40
S55
4.36
680
25
30
S33
1.91
2200
35
45
S56
4.59
180
1200
30
30
S43
2.62
1200
30
35
S44
2.66
680
30
20
S41
1.80
2700
30
55
S48
4.76
1200
35
25
S52
2.55
680
30
25
S42
1.85
2700
35
50
S57
5.03
1200
35
30
S53
2.65
3.12
680
35
20
S51
2.01
3300
35
50
S57
5.47
1500
25
50
S37
820
22
35
S24
2.08
3900
35
55
S58
6.18
1500
25
55
S38
3.38
820
22
40
S25
2.17
220
22
20
S21
0.91
1500
30
40
S45
3.01
820
22
45
S26
2.19
270
22
20
S21
1.00
1500
35
30
S53
2.96
820
25
30
S33
2.09
270
25
20
S31
1.14
1500
35
35
S54
3.02
820
25
35
S34
2.17
330
22
25
S22
1.25
1800
25
60
S39
3.83
820
30
25
S42
2.03
330
25
20
S31
1.20
1800
30
45
S46
3.42
820
35
20
S51
2.20
390
22
25
S22
1.35
1800
35
35
S54
3.31
1000
22
45
S26
2.42
470
22
25
S22
1.49
2200
30
50
S47
3.83
1000
22
50
S27
2.60
1000
25
35
S34
2.40
180
470
22
30
S23
1.55
2200
35
40
S55
3.73
470
25
25
S32
1.56
2700
30
60
S49
4.64
1000
25
40
S35
2.47
470
30
20
S41
1.50
2700
35
45
S56
4.25
1000
30
30
S43
2.45
560
22
30
S23
1.69
3300
35
55
S58
4.92
3900
35
60
S59
5.53
1000
35
25
S52
2.60
560
22
35
S24
1.73
1200
22
50
S27
2.84
560
25
25
S32
1.67
1200
25
40
S35
2.84
560
25
30
S33
1.74
(Note) Rated ripple current : 105℃ , 120Hz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
LAT, LTT
LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS
Standard Ratings
Rated
Rated
voltage capacitance
(V)
(µF)
200
Case(mm)
D
L
Casing
Symbol
Rated ripple
current
(Arms)
Rated
Rated
voltage capacitance
(V)
(µF)
Case(mm)
D
L
Casing
Symbol
Rated ripple
current
(Arms)
Rated
Rated
voltage capacitance
(V)
(µF)
Case(mm)
D
L
Casing
Symbol
Rated ripple
current
(Arms)
150
22
20
S21
0.76
1200
25
45
S36
2.73
470
22
35
S24
1.58
180
22
20
S21
0.82
1200
25
50
S37
2.82
470
22
40
S25
1.64
180
25
20
S31
0.93
1200
30
35
S44
2.63
470
25
30
S33
1.61
220
22
20
S21
0.91
1200
30
40
S45
2.69
470
25
35
S34
1.63
270
22
20
S21
1.00
1200
35
30
S53
2.63
470
30
25
S42
1.61
270
25
20
S31
1.09
1500
25
55
S38
3.38
470
35
20
S51
1.55
330
22
25
S22
1.29
1500
30
40
S45
3.01
560
22
40
S25
1.79
330
25
20
S31
1.18
1500
30
45
S46
3.12
560
22
45
S26
1.82
330
30
20
S41
1.26
1500
35
30
S53
2.96
560
25
35
S34
1.77
390
22
25
S22
1.35
1500
35
35
S54
2.97
560
25
40
S35
1.82
390
22
30
S23
1.40
390
25
25
S32
1.37
200
1800
30
45
S46
3.42
560
30
25
S42
1.69
1800
30
50
S47
3.54
560
30
30
S43
1.80
390
30
20
S41
1.37
1800
35
35
S54
3.25
560
35
20
S51
1.66
470
22
30
S23
1.53
1800
35
40
S55
3.59
560
35
25
S52
1.80
470
25
25
S32
1.50
1800
35
45
S56
4.00
680
22
45
S26
2.01
470
30
20
S41
1.50
2200
30
55
S48
4.06
680
22
50
S27
2.06
470
35
20
S51
1.67
2200
35
40
S55
3.73
680
25
40
S35
2.01
560
22
30
S23
1.69
2200
35
45
S56
4.13
680
25
45
S36
2.06
560
22
35
S24
1.73
2700
35
50
S57
5.09
680
25
55
S38
2.28
560
25
25
S32
1.64
3300
35
60
S59
6.03
680
30
30
S43
1.98
560
25
30
S33
1.70
120
22
20
S21
0.67
680
30
35
S44
2.04
560
30
20
S41
1.64
150
22
20
S21
0.75
680
35
25
S52
1.98
560
30
25
S42
1.75
150
25
20
S31
0.92
680
35
30
S53
2.04
560
35
20
S51
1.82
180
22
20
S21
0.82
820
22
55
S28
2.34
680
22
35
S24
1.90
180
25
20
S31
1.01
820
25
45
S36
2.26
250
680
22
40
S25
1.97
220
22
25
S22
1.11
820
25
50
S37
2.42
680
25
30
S33
1.87
220
25
20
S31
1.02
820
30
35
S44
2.24
680
25
35
S34
1.95
220
30
20
S41
1.03
820
35
25
S52
2.07
680
30
25
S42
1.92
270
22
25
S22
1.13
820
35
30
S53
2.24
680
35
20
S51
1.92
270
22
30
S23
1.25
1000
25
50
S37
2.57
820
22
40
S25
2.17
270
25
20
S31
1.07
1000
30
40
S45
2.67
820
22
45
S26
2.21
820
25
35
S34
2.14
250
270
25
25
S32
1.15
1000
35
30
S53
2.47
270
30
20
S41
1.14
1000
35
35
S54
2.60
820
25
40
S35
2.20
330
22
30
S23
1.30
1200
30
45
S46
2.79
820
30
25
S42
2.04
330
22
35
S24
1.50
1200
30
50
S47
2.89
820
30
30
S43
2.17
330
25
25
S32
1.27
1200
35
35
S54
2.85
820
35
25
S52
2.07
330
30
20
S41
1.26
1200
35
40
S55
3.18
1000
22
50
S27
2.50
330
35
20
S51
1.30
1500
30
50
S47
3.23
1000
25
40
S35
2.43
390
22
30
S23
1.38
1500
35
40
S55
3.28
1000
25
45
S36
2.49
390
22
35
S24
1.52
1500
35
45
S56
3.69
1000
30
30
S43
2.39
390
25
25
S32
1.38
1500
35
50
S57
3.80
1000
30
35
S44
2.40
390
25
30
S33
1.41
1800
35
45
S56
3.74
1000
35
25
S52
2.29
390
30
20
S41
1.37
1800
35
50
S57
4.16
2200
35
50
S57
4.23
1000
35
30
S53
2.40
390
30
25
S42
1.47
1200
22
60
S29
2.93
390
35
20
S51
1.41
(Note) Rated ripple current : 105℃ , 120Hz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
LAT, LTT
LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS
Standard Ratings
Rated
Rated
voltage capacitance
(V)
(µF)
315
Case(mm)
D
L
Casing
Symbol
Rated ripple
current
(Arms)
Rated
Rated
voltage capacitance
(V)
(µF)
Case(mm)
D
L
Casing
Symbol
Rated ripple
current
(Arms)
Rated
Rated
voltage capacitance
(V)
(µF)
Case(mm)
D
L
Casing
Symbol
Rated ripple
current
(Arms)
68
22
20
S21
0.50
680
25
55
S38
2.20
270
25
40
S35
1.27
82
22
20
S21
0.55
680
30
40
S45
2.03
270
30
25
S42
1.17
100
22
20
S21
0.61
680
30
50
S47
2.18
270
30
30
S43
1.24
100
25
20
S31
0.69
680
35
30
S53
2.00
270
35
20
S51
1.15
120
22
20
S21
0.67
680
35
40
S55
2.07
270
35
25
S52
1.19
120
22
25
S22
0.75
820
25
60
S39
2.49
330
22
40
S25
1.37
150
22
25
S22
0.84
150
22
30
S23
0.88
315
820
30
45
S46
2.31
330
22
45
S26
1.40
820
35
35
S54
2.24
330
25
35
S34
1.36
150
25
20
S31
0.80
820
35
45
S56
2.34
330
25
40
S35
1.40
150
30
20
S41
0.85
1000
30
55
S48
2.67
330
25
45
S36
1.43
180
22
25
S22
0.92
1000
35
40
S55
2.52
330
30
25
S42
1.29
180
22
30
S23
0.96
1200
30
60
S49
2.97
330
30
30
S43
1.37
180
22
35
S24
0.98
1200
35
50
S57
2.86
330
30
35
S44
1.40
180
25
25
S32
0.97
1500
35
55
S58
3.31
330
35
25
S52
1.31
180
30
20
S41
0.93
56
22
20
S21
0.46
390
22
50
S27
1.56
180
35
20
S51
0.94
82
22
20
S21
0.55
390
25
40
S35
1.52
220
22
30
S23
1.06
82
25
20
S31
0.63
390
25
45
S36
1.56
220
22
40
S25
1.12
100
22
20
S21
0.61
390
25
50
S37
1.66
220
25
25
S32
1.07
100
22
25
S22
0.69
390
30
30
S43
1.49
220
25
30
S33
1.09
100
25
20
S31
0.69
390
30
35
S44
1.52
220
30
20
S41
1.03
120
22
20
S21
0.67
390
30
40
S45
1.54
270
22
35
S24
1.20
120
22
25
S22
0.75
390
35
25
S52
1.43
1.51
270
22
45
S26
1.27
120
22
30
S23
0.78
390
35
30
S53
270
25
30
S33
1.20
120
25
20
S31
0.72
470
22
55
S28
1.78
270
25
35
S34
1.23
120
30
20
S41
0.76
470
25
45
S36
1.71
270
30
25
S42
1.17
150
22
25
S22
0.84
270
35
20
S51
1.15
150
22
30
S23
0.88
350
470
25
50
S37
1.83
470
30
35
S44
1.67
330
22
35
S24
1.33
150
22
35
S24
0.89
470
30
40
S45
1.69
330
22
50
S27
1.44
150
25
20
S31
0.79
470
30
45
S46
1.75
330
25
30
S33
1.33
150
25
25
S32
0.88
470
35
30
S53
1.66
330
25
40
S35
1.40
150
30
20
S41
0.85
470
35
35
S54
1.69
330
30
25
S42
1.29
150
35
20
S51
0.86
560
25
50
S37
1.90
330
30
30
S43
1.37
180
22
30
S23
0.96
560
30
40
S45
1.84
330
35
20
S51
1.28
330
35
25
S52
1.31
350
180
22
35
S24
0.98
560
30
45
S46
1.91
180
22
40
S25
1.02
560
30
50
S47
1.97
390
22
45
S26
1.52
180
25
25
S32
0.97
560
35
30
S53
1.81
390
25
35
S34
1.48
180
25
30
S33
0.99
560
35
35
S54
1.85
390
25
45
S36
1.56
180
30
20
S41
0.93
560
35
40
S55
1.88
390
30
30
S43
1.49
180
35
20
S51
0.94
680
22
60
S29
2.21
390
30
35
S44
1.52
220
22
30
S23
1.06
680
30
45
S46
2.10
390
35
25
S52
1.43
220
22
35
S24
1.08
680
30
50
S47
2.18
470
22
50
S27
1.72
220
22
45
S26
1.14
680
35
35
S54
2.04
470
25
40
S35
1.67
220
25
25
S32
1.07
680
35
40
S55
2.07
470
25
50
S37
1.83
220
25
30
S33
1.09
680
35
45
S56
2.14
470
30
30
S43
1.64
220
25
35
S34
1.11
820
30
50
S47
2.32
470
30
40
S45
1.69
220
30
20
S41
1.03
820
35
40
S55
2.28
470
35
25
S52
1.57
220
30
25
S42
1.06
820
35
45
S56
2.34
470
35
30
S53
1.66
220
35
20
S51
1.04
820
35
50
S57
2.36
560
22
55
S28
1.94
270
22
35
S24
1.20
1000
30
60
S49
2.72
2.59
560
25
45
S36
1.87
270
22
40
S25
1.24
1000
35
45
S56
560
30
35
S44
1.82
270
22
45
S26
1.27
1000
35
50
S57
2.61
560
30
45
S46
1.91
270
22
50
S27
1.30
1200
35
55
S58
2.96
560
35
30
S53
1.81
270
25
30
S33
1.21
560
35
35
S54
1.85
270
25
35
S34
1.23
(Note) Rated ripple current : 105℃ , 120Hz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
LAT, LTT
LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS
Standard Ratings
Rated
Rated
voltage capacitance
(V)
(µF)
400
Case(mm)
D
L
Casing
Symbol
Rated ripple
current
(Arms)
Rated
Rated
voltage capacitance
(V)
(µF)
Case(mm)
D
L
Casing
Symbol
Rated ripple
current
(Arms)
Rated
Rated
voltage capacitance
(V)
(µF)
Case(mm)
D
L
Casing
Symbol
Rated ripple
current
(Arms)
56
22
20
S21
0.53
330
30
30
S43
1.53
180
22
40
S25
1.17
68
22
20
S21
0.58
330
30
35
S44
1.61
180
22
45
S26
1.19
68
25
20
S31
0.66
330
35
25
S52
1.51
180
25
30
S33
1.13
82
22
20
S21
0.64
330
35
30
S53
1.56
180
25
35
S34
1.16
82
22
25
S22
0.71
390
22
55
S28
1.86
180
30
25
S42
1.10
82
25
20
S31
0.68
390
25
45
S36
1.79
180
30
30
S43
1.14
82
30
20
S41
0.72
390
25
50
S37
1.85
180
35
20
S51
1.08
100
22
20
S21
0.70
390
30
35
S44
1.75
180
35
25
S52
1.12
100
22
25
S22
0.79
390
30
40
S45
1.77
220
22
45
S26
1.32
100
25
20
S31
0.75
390
35
30
S53
1.69
220
22
50
S27
1.35
100
30
20
S41
0.80
390
35
35
S54
1.76
220
25
35
S34
1.28
120
22
25
S22
0.86
470
25
50
S37
2.04
220
25
40
S35
1.31
120
22
30
S23
0.90
470
30
40
S45
1.94
220
25
45
S36
1.35
120
25
20
S31
0.82
470
30
45
S46
2.01
220
30
25
S42
1.22
120
25
25
S32
0.88
120
30
20
S41
0.87
400
470
35
30
S53
1.86
220
30
30
S43
1.27
470
35
35
S54
1.93
220
35
25
S52
1.23
120
35
20
S51
0.89
560
25
60
S39
2.46
270
22
50
S27
1.50
150
22
30
S23
0.99
560
30
45
S46
2.19
270
25
40
S35
1.45
150
22
35
S24
1.03
560
30
50
S47
2.27
270
25
45
S36
1.49
150
25
25
S32
0.99
560
35
35
S54
2.11
270
25
50
S37
1.54
150
25
30
S33
1.01
560
35
40
S55
2.16
270
30
30
S43
1.43
150
30
20
S41
0.98
680
30
50
S47
2.50
270
30
35
S44
1.45
1.37
150
35
20
S51
0.99
680
35
40
S55
2.39
270
35
25
S52
180
22
30
S23
1.10
680
35
45
S56
2.53
270
35
30
S53
1.44
180
22
35
S24
1.13
680
35
50
S57
2.73
330
22
60
S29
1.78
180
22
40
S25
1.17
820
30
60
S49
2.94
180
25
25
S32
1.09
820
35
45
S56
2.70
450
330
25
50
S37
1.76
330
30
35
S44
1.61
180
25
30
S33
1.11
820
35
50
S57
3.00
330
30
40
S45
1.62
180
30
20
S41
1.07
1000
35
55
S58
3.43
330
30
45
S46
1.68
180
30
25
S42
1.10
56
22
20
S21
0.53
330
35
30
S53
1.60
180
35
20
S51
1.08
56
25
20
S31
0.60
330
35
35
S54
1.62
220
22
35
S24
1.25
68
22
20
S21
0.58
390
25
55
S38
1.98
220
22
40
S25
1.29
68
22
25
S22
0.65
390
30
40
S45
1.77
220
22
45
S26
1.32
68
25
20
S31
0.66
390
30
45
S46
1.83
220
25
30
S33
1.23
82
22
25
S22
0.71
390
30
50
S47
2.07
220
25
35
S34
1.28
82
25
20
S31
0.68
390
35
35
S54
1.76
220
30
25
S42
1.22
82
30
20
S41
0.72
390
35
40
S55
2.00
220
30
30
S43
1.25
100
22
25
S22
0.79
470
30
45
S46
2.01
220
35
20
S51
1.20
100
22
30
S23
0.82
470
30
50
S47
2.13
220
35
25
S52
1.23
270
22
40
S25
1.43
450
100
25
25
S32
0.81
470
35
35
S54
1.93
100
30
20
S41
0.80
470
35
40
S55
2.20
270
22
45
S26
1.46
120
22
30
S23
0.90
470
35
45
S56
2.27
270
22
50
S27
1.50
120
22
35
S24
0.92
560
30
45
S46
2.19
270
25
35
S34
1.42
120
25
25
S32
0.88
560
35
35
S54
2.11
270
25
40
S35
1.45
120
25
30
S33
0.93
560
35
40
S55
2.40
270
30
25
S42
1.35
120
30
20
S41
0.87
560
35
45
S56
2.48
270
30
30
S43
1.39
120
35
20
S51
0.89
560
35
50
S57
2.50
270
35
25
S52
1.37
150
22
35
S24
1.03
680
30
60
S49
2.68
330
22
45
S26
1.61
150
22
40
S25
1.05
680
35
45
S56
2.59
330
22
50
S27
1.65
150
25
30
S33
1.03
680
35
50
S57
2.61
330
25
40
S35
1.61
150
30
25
S42
1.00
820
35
60
S59
3.07
330
25
45
S36
1.65
150
35
20
S51
0.99
(Note) Rated ripple current : 105℃ , 120Hz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
LAT, LTT
LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS
Standard Ratings
Rated
Rated
voltage capacitance
(V)
(µF)
500
Case(mm)
D
L
Casing
Symbol
Rated ripple
current
(Arms)
Rated
Rated
voltage capacitance
(V)
(µF)
Case(mm)
D
L
Casing
Symbol
Rated ripple
current
(Arms)
22
22
20
S21
0.24
150
25
45
S36
1.11
27
22
20
S21
0.28
150
30
25
S42
1.00
33
22
25
S22
0.44
150
30
30
S43
1.02
39
22
20
S21
0.44
150
30
40
S45
1.10
39
22
25
S22
0.49
150
35
20
S51
0.99
47
22
20
S21
0.48
150
35
25
S52
1.02
47
22
30
S23
0.56
150
35
35
S54
1.09
47
25
20
S31
0.55
180
22
45
S26
1.19
56
22
20
S21
0.53
180
22
50
S27
1.22
56
22
25
S22
0.59
180
25
40
S35
1.19
56
22
30
S23
0.61
180
25
45
S36
1.22
56
25
20
S31
0.57
180
25
50
S37
1.30
68
22
25
S22
0.65
180
30
30
S43
1.14
68
22
30
S23
0.68
180
30
35
S44
1.16
68
22
35
S24
0.70
180
30
45
S46
1.24
68
25
20
S31
0.62
180
35
25
S52
1.12
68
25
25
S32
0.68
180
35
30
S53
1.15
68
25
30
S33
0.70
220
22
55
S28
1.40
68
30
20
S41
0.66
220
25
45
S36
1.35
82
22
25
S22
0.71
220
25
50
S37
1.39
82
22
30
S23
0.74
220
30
35
S44
1.31
82
22
40
S25
0.79
220
30
40
S45
1.33
82
25
25
S32
0.73
220
30
50
S47
1.42
82
25
30
S33
0.77
220
35
25
S52
1.23
82
25
35
S34
0.79
82
30
20
S41
0.72
500
220
35
30
S53
1.27
220
35
40
S55
1.36
100
22
30
S23
0.82
270
22
60
S29
1.61
100
22
35
S24
0.84
270
25
50
S37
1.54
100
22
45
S26
0.89
270
30
40
S45
1.47
100
25
25
S32
0.81
270
30
45
S46
1.52
100
25
30
S33
0.85
270
30
50
S47
1.58
100
25
40
S35
0.89
270
35
30
S53
1.41
100
30
20
S41
0.80
270
35
35
S54
1.46
100
30
25
S42
0.82
270
35
40
S55
1.50
100
30
30
S43
0.87
330
25
60
S39
1.88
100
35
20
S51
0.81
330
30
45
S46
1.68
120
22
35
S24
0.92
330
30
50
S47
1.71
120
22
40
S25
0.95
330
35
35
S54
1.62
120
22
50
S27
1.00
330
35
40
S55
1.66
120
25
30
S33
0.92
330
35
45
S56
1.71
120
25
35
S34
0.95
390
30
50
S47
1.77
120
25
40
S35
0.97
390
35
40
S55
1.81
120
30
25
S42
0.90
390
35
45
S56
1.86
120
30
30
S43
0.93
390
35
50
S57
1.88
120
30
35
S44
0.97
470
30
55
S48
2.09
120
35
20
S51
0.89
470
35
45
S56
2.04
120
35
30
S53
0.94
470
35
50
S57
2.06
150
22
40
S25
1.07
560
35
50
S57
2.25
150
22
45
S26
1.09
560
35
55
S58
2.33
680
35
60
S59
2.66
150
25
35
S34
1.05
150
25
40
S35
1.08
(Note) Rated ripple current : 105℃ , 120Hz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
LAZ
LAZ, LTZ
LARGECAPACITANCE
CAPACITANCEALUMINUM
ALUMINUM ELECTROLYTIC
LARGE
ELECTROLYTICCAPACITORS
CAPACITORS
®
High-Reliability, High-Ripple, Long Life Capacitors
●
●
●
GREEN
CAP
105˚C
3000hours
High-reliability, high-ripple, long life capacitors.
Guarantees 3000 hours at 105°
C.
Best suited to On-Board-Charger for EV, PHEV.
Long life
LAZ
LAT
Marking color : White print on a black sleeve
Specifications
Item
Performance
ー40 to +105 (ー25 to +105 at 160V or more)
±20
Category temperature range (℃)
Tolerance at rated capacitance (%)
Leakage current (µA)
(max.)
(20℃,120Hz)
3√ ̄
CV (after 5 minutes) C : Rated capacitance (µF) ; V : Rated voltage (V)
Rated voltage (V)
tanδ (max.)
Tangent of loss angle
(tanδ)
16
0.50
25
0.40
35
0.35
50
0.30
(20℃)
63 to 100 160 to 250 350 to 500
0.20
0.15
0.20
(20℃,120Hz)
Characteristics at high
and low temperature
Rated voltage (V)
Impedance ratio
Zー25℃/Z+20℃
(max.)
Zー40℃/Z+20℃
Endurance (105℃)
(Applied ripple current)
Test time
Leakage current
Percentage of capacitance change
Tangent of the loss angle
3000 hours
The initial specified value or less
Within ±20% of initial value
200% or less of the initial specified value
Test time
Leakage current
Percentage of capacitance change
Tangent of the loss angle
1000 hours
The initial specified value or less
Within ±15% of initial value
150% or less of the initial specified value
Shelf life (105℃)
16 to 100
4
15
160 to 500
4
̶
(120Hz)
Voltage application treatment : According to JIS C5101-4 4.1
Applicable standards
JIS C5101 - 1,- 4 (IEC 60384 - 1,- 4)
Outline Drawing
Unit: mm
2‒φ2
Sleeve
10
0.
±
10
Lug terminal details
Thickness : 0.8t
0.85±0.15
4.0±0.5
Vent
(5.4)
(0.9)
(2.1)
(‒) Negative terminal indicated by
cross notching
L+2max.
(4.7)
φD+1/0
1
+0.2
1.5
−0.1
Markings
Position of PC board holes
( ) : Reference size
3.3±0.1
Three terminals type
10±0.1
φ2.5
2−φ2
4.75±0.1
Coefficient of Frequency for Rated Ripple Current
Part numbering system
Frequency (Hz)
Rated voltage (V)
series LAZ, standard terminal type :400V470µF
LAZ
̶ 400 V
Series code
Rated voltage
symbol
471
Rated capacitance
symbol
M
Capacitance
tolerance symbol
S54 #
Casing
symbol
B
Optional
symbol
100 or less
160 to 250
350 or more
50
120
1k
10k
30k
0.95
0.81
0.77
1
1
1
1.10
1.32
1.30
1.15
1.45
1.41
1.15
1.50
1.43
series LTZ, three terminals type :400V470µF
LTZ
̶ 400 V
Series code
Rated voltage
symbol
471
Rated capacitance
symbol
M
Capacitance
tolerance symbol
S54 #
Casing
symbol
B
Optional
symbol
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
LAZ, LTZ
LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS
Standard Ratings
Rated
Rated
voltage capacitance
(V)
(µF)
16
Case(mm)
D
L
Casing
Symbol
Rated ripple
current
(Arms)
Rated
Rated
voltage capacitance
(V)
(µF)
Case(mm)
D
L
Casing
Symbol
Rated ripple
current
(Arms)
Rated
Rated
voltage capacitance
(V)
(µF)
Case(mm)
D
L
Casing
Symbol
Rated ripple
current
(Arms)
4700
22
20
S21
1.23
27000
35
25
S52
3.80
10000
30
25
S42
2.48
5600
22
20
S21
1.35
27000
35
30
S53
3.82
10000
35
20
S51
2.40
6800
22
20
S21
1.48
33000
22
50
S27
4.00
12000
22
35
S24
2.59
6800
22
25
S22
1.60
33000
25
45
S36
4.16
12000
22
40
S25
2.63
6800
25
20
S31
1.53
33000
25
50
S37
4.21
12000
22
45
S26
2.69
8200
22
25
S22
1.76
33000
30
35
S44
4.15
12000
25
30
S33
2.61
8200
25
20
S31
1.68
33000
30
40
S45
4.23
12000
25
35
S34
2.67
8200
30
20
S41
1.84
33000
30
45
S46
4.30
12000
25
40
S35
2.74
10000
22
25
S22
1.94
33000
35
30
S53
4.22
12000
30
25
S42
2.59
10000
22
30
S23
1.99
33000
35
35
S54
4.24
12000
30
30
S43
2.70
10000
25
20
S31
1.85
39000
25
50
S37
4.58
12000
35
20
S51
2.63
10000
25
25
S32
1.99
39000
30
40
S45
4.60
12000
35
25
S52
2.80
10000
30
20
S41
2.03
39000
30
45
S46
4.67
15000
22
40
S25
2.94
12000
22
30
S23
2.18
39000
30
50
S47
4.74
15000
22
45
S26
3.01
12000
22
35
S24
2.28
12000
25
25
S32
2.18
16
39000
35
30
S53
4.59
15000
25
35
S34
2.99
39000
35
35
S54
4.61
15000
25
40
S35
3.06
12000
25
30
S33
2.30
39000
35
40
S55
4.72
15000
25
45
S36
3.15
12000
30
20
S41
2.23
47000
30
45
S46
5.13
15000
30
30
S43
3.02
12000
30
25
S42
2.38
47000
30
50
S47
5.20
15000
30
35
S44
3.13
12000
35
20
S51
2.38
47000
35
35
S54
5.06
15000
35
25
S52
3.13
15000
22
30
S23
2.44
47000
35
40
S55
5.18
15000
35
30
S53
3.22
15000
22
35
S24
2.55
47000
35
45
S56
5.27
18000
22
45
S26
3.29
3.44
15000
22
40
S25
2.64
56000
30
50
S47
5.68
18000
22
50
S27
15000
25
25
S32
2.44
56000
35
40
S55
5.66
18000
25
40
S35
3.36
15000
25
30
S33
2.57
56000
35
45
S56
5.75
18000
25
45
S36
3.45
15000
25
35
S34
2.68
68000
35
45
S56
6.34
18000
25
50
S37
3.54
15000
30
25
S42
2.66
68000
35
50
S57
6.59
18000
30
30
S43
3.31
15000
35
20
S51
2.66
82000
35
50
S57
7.23
18000
22
35
S24
2.79
3300
22
20
S21
1.21
25
18000
30
35
S44
3.43
18000
30
40
S45
3.54
18000
22
40
S25
2.89
3900
22
20
S21
1.31
18000
35
25
S52
3.43
18000
22
45
S26
2.98
4700
22
20
S21
1.44
18000
35
30
S53
3.53
18000
25
30
S33
2.82
4700
22
25
S22
1.55
22000
22
50
S27
3.80
18000
25
35
S34
2.94
4700
25
20
S31
1.48
22000
25
45
S36
3.81
18000
25
40
S35
3.04
5600
22
25
S22
1.69
22000
25
50
S37
3.91
18000
30
25
S42
2.91
5600
25
20
S31
1.61
22000
30
35
S44
3.79
18000
30
30
S43
3.00
5600
30
20
S41
1.74
22000
30
40
S45
3.91
18000
35
20
S51
2.91
6800
22
25
S22
1.86
22000
30
45
S46
4.24
18000
35
25
S52
3.10
6800
22
30
S23
1.91
22000
35
30
S53
3.90
22000
22
40
S25
3.20
6800
25
20
S31
1.78
22000
35
35
S54
3.96
22000
22
45
S26
3.29
6800
25
25
S32
1.91
27000
25
50
S37
4.34
22000
25
35
S34
3.25
6800
30
20
S41
1.92
27000
30
40
S45
4.34
22000
25
40
S35
3.36
22000
25
45
S36
3.40
25
8200
22
30
S23
2.10
27000
30
45
S46
4.70
8200
22
35
S24
2.14
27000
35
35
S54
4.39
22000
30
30
S43
3.32
8200
25
25
S32
2.10
27000
35
40
S55
4.56
22000
30
35
S44
3.39
8200
25
30
S33
2.16
27000
35
45
S56
4.75
22000
35
25
S52
3.43
8200
30
20
S41
2.10
33000
30
45
S46
5.19
27000
22
45
S26
3.65
8200
30
25
S42
2.25
33000
30
50
S47
5.30
27000
22
50
S27
3.70
8200
35
20
S51
2.17
33000
35
35
S54
4.85
27000
25
40
S35
3.72
10000
22
30
S23
2.32
33000
35
40
S55
5.04
5.39
27000
25
45
S36
3.77
10000
22
35
S24
2.36
33000
35
50
S57
27000
25
50
S37
3.81
10000
22
40
S25
2.40
39000
30
50
S47
5.58
27000
30
30
S43
3.67
10000
25
25
S32
2.32
39000
35
40
S55
5.48
27000
30
35
S44
3.76
10000
25
30
S33
2.39
39000
35
45
S56
5.71
27000
30
40
S45
3.83
10000
25
35
S34
2.44
47000
35
50
S57
6.43
(Note) Rated ripple current : 105℃ , 120Hz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
LAZ, LTZ
LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS
Standard Ratings
Rated
Rated
voltage capacitance
(V)
(µF)
35
Case(mm)
D
L
Casing
Symbol
Rated ripple
current
(Arms)
Rated
Rated
voltage capacitance
(V)
(µF)
Case(mm)
D
L
Casing
Symbol
Rated ripple
current
(Arms)
Rated
Rated
voltage capacitance
(V)
(µF)
Case(mm)
D
L
Casing
Symbol
Rated ripple
current
(Arms)
2200
22
20
S21
1.08
12000
35
25
S52
3.14
4700
22
45
S26
2.56
2700
22
20
S21
1.20
12000
35
30
S53
3.20
4700
25
30
S33
2.39
3300
22
20
S21
1.33
15000
25
45
S36
3.58
4700
25
35
S34
2.50
3300
22
25
S22
1.43
15000
25
50
S37
3.64
4700
30
25
S42
2.44
3300
25
20
S31
1.39
15000
30
35
S44
3.58
4700
30
30
S43
2.58
3900
22
25
S22
1.55
15000
30
40
S45
3.67
4700
35
20
S51
2.51
3900
22
30
S23
1.65
15000
30
45
S46
3.74
4700
35
25
S52
2.67
3900
25
20
S31
1.51
15000
35
30
S53
3.58
5600
22
40
S25
2.70
3900
30
20
S41
1.65
15000
35
35
S54
3.69
5600
22
45
S26
2.79
4700
22
25
S22
1.71
18000
25
50
S37
3.99
5600
22
50
S27
2.89
4700
22
30
S23
1.81
18000
30
40
S45
4.02
5600
25
35
S34
2.73
4700
25
20
S31
1.66
18000
30
45
S46
4.10
5600
25
40
S35
2.81
4700
25
25
S32
1.78
4700
30
20
S41
1.82
35
18000
35
30
S53
3.92
5600
30
25
S42
2.66
18000
35
35
S54
4.04
5600
30
30
S43
2.82
5600
22
30
S23
1.98
18000
35
40
S55
4.16
5600
30
35
S44
2.95
5600
22
35
S24
2.02
22000
30
45
S46
4.53
5600
35
25
S52
2.91
5600
25
25
S32
1.94
22000
30
50
S47
4.71
6800
22
45
S26
3.08
5600
25
30
S33
2.04
22000
35
35
S54
4.47
6800
22
50
S27
3.18
5600
30
20
S41
1.98
22000
35
40
S55
4.60
6800
25
40
S35
3.10
5600
30
25
S42
2.12
22000
35
50
S57
4.92
6800
25
45
S36
3.24
5600
35
20
S51
2.16
27000
30
50
S47
5.22
6800
25
50
S37
3.37
6800
22
35
S24
2.23
27000
35
40
S55
5.09
6800
30
30
S43
3.10
3.25
6800
22
40
S25
2.28
27000
35
45
S56
5.24
6800
30
35
S44
6800
25
25
S32
2.14
33000
35
45
S56
5.80
6800
30
40
S45
3.39
6800
25
30
S33
2.25
33000
35
50
S57
6.03
6800
35
25
S52
3.21
6800
25
35
S34
2.31
1200
22
20
S21
0.99
6800
30
25
S42
2.34
1500
22
20
S21
1.11
50
6800
35
30
S53
3.31
8200
22
50
S27
3.50
6800
35
20
S51
2.38
1800
22
20
S21
1.22
8200
25
40
S35
3.40
8200
22
35
S24
2.44
1800
22
25
S22
1.31
8200
25
45
S36
3.56
8200
22
40
S25
2.50
1800
25
20
S31
1.29
8200
30
35
S44
3.57
8200
22
50
S27
2.67
2200
22
25
S22
1.45
8200
30
40
S45
3.72
8200
25
30
S33
2.47
2200
25
20
S31
1.43
8200
30
45
S46
3.89
8200
25
35
S34
2.54
2700
22
25
S22
1.60
8200
35
30
S53
3.63
8200
25
40
S35
2.60
2700
22
30
S23
1.70
8200
35
35
S54
3.66
8200
30
25
S42
2.45
2700
25
20
S31
1.58
10000
25
45
S36
3.93
8200
30
30
S43
2.56
2700
25
25
S32
1.70
10000
25
50
S37
4.09
8200
35
20
S51
2.61
2700
30
20
S41
1.73
10000
30
40
S45
3.90
8200
35
25
S52
2.78
3300
22
30
S23
1.88
10000
30
45
S46
4.00
10000
22
40
S25
2.76
3300
22
35
S24
1.98
10000
30
50
S47
4.27
10000
22
45
S26
2.83
10000
25
35
S34
2.80
50
3300
25
25
S32
1.88
10000
35
30
S53
4.01
3300
25
30
S33
2.00
10000
35
35
S54
4.05
10000
25
40
S35
2.87
3300
30
20
S41
1.91
10000
35
40
S55
4.07
10000
25
45
S36
2.92
3300
35
20
S51
2.10
12000
30
45
S46
4.30
10000
30
30
S43
2.83
3900
22
30
S23
2.04
12000
30
50
S47
4.68
10000
30
35
S44
2.92
3900
22
35
S24
2.15
12000
35
35
S54
4.43
10000
35
25
S52
3.07
3900
22
40
S25
2.25
12000
35
40
S55
4.46
12000
22
45
S26
3.09
3900
25
25
S32
2.04
12000
35
45
S56
4.50
12000
22
50
S27
3.23
3900
25
30
S33
2.17
15000
30
50
S47
4.95
12000
25
40
S35
3.15
3900
25
35
S34
2.28
15000
35
40
S55
4.98
5.03
12000
25
45
S36
3.20
3900
30
20
S41
2.08
15000
35
45
S56
12000
25
50
S37
3.26
3900
30
25
S42
2.22
18000
35
45
S56
5.51
12000
30
30
S43
3.10
3900
35
20
S51
2.28
18000
35
50
S57
5.73
22000
35
50
S57
6.33
12000
30
35
S44
3.20
4700
22
35
S24
2.36
12000
30
40
S45
3.28
4700
22
40
S25
2.47
(Note) Rated ripple current : 105℃ , 120Hz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
LAZ, LTZ
LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS
Standard Ratings
Rated
Rated
voltage capacitance
(V)
(µF)
63
Case(mm)
D
L
Casing
Symbol
Rated ripple
current
(Arms)
Rated
Rated
voltage capacitance
(V)
(µF)
Case(mm)
D
L
Casing
Symbol
Rated ripple
current
(Arms)
Rated
Rated
voltage capacitance
(V)
(µF)
Case(mm)
D
L
Casing
Symbol
Rated ripple
current
(Arms)
820
22
20
S21
0.96
4700
35
30
S53
2.83
2200
22
40
S25
2.02
1000
22
20
S21
1.06
5600
25
45
S36
3.04
2200
22
45
S26
2.09
1200
22
20
S21
1.11
5600
25
50
S37
3.14
2200
25
30
S33
1.96
1200
22
25
S22
1.25
5600
30
35
S44
3.06
2200
25
35
S34
2.01
1200
25
20
S31
1.16
5600
30
40
S45
3.17
2200
30
25
S42
2.00
1500
22
25
S22
1.40
5600
30
45
S46
3.28
2200
30
30
S43
2.10
1500
25
20
S31
1.29
5600
35
30
S53
3.09
2200
35
20
S51
2.04
1800
22
25
S22
1.46
5600
35
35
S54
3.24
2200
35
25
S52
2.17
1800
22
30
S23
1.60
6800
25
50
S37
3.46
2700
22
40
S25
2.24
1800
25
20
S31
1.42
6800
30
40
S45
3.49
2700
22
45
S26
2.32
1800
25
25
S32
1.52
6800
30
45
S46
3.61
2700
25
35
S34
2.23
1800
30
20
S41
1.47
6800
30
50
S47
3.73
2700
25
40
S35
2.32
2200
22
30
S23
1.68
2200
22
35
S24
1.73
63
6800
35
30
S53
3.40
2700
25
45
S36
2.43
6800
35
35
S54
3.57
2700
30
25
S42
2.22
2200
25
25
S32
1.68
6800
35
40
S55
3.71
2700
30
30
S43
2.33
2200
25
30
S33
1.75
8200
30
45
S46
3.97
2700
30
35
S44
2.43
2200
30
20
S41
1.63
8200
30
50
S47
4.10
2700
35
25
S52
2.40
2200
35
20
S51
1.85
8200
35
35
S54
3.92
3300
22
45
S26
2.56
2700
22
30
S23
1.86
8200
35
40
S55
4.07
3300
22
50
S27
2.67
2700
22
35
S24
1.92
8200
35
45
S56
4.16
3300
25
35
S34
2.46
2700
25
25
S32
1.86
10000
30
50
S47
4.52
3300
25
40
S35
2.57
2700
25
30
S33
1.94
10000
35
40
S55
4.50
3300
25
50
S37
2.76
2.57
2700
25
35
S34
1.99
10000
35
45
S56
4.59
3300
30
30
S43
2700
30
20
S41
1.81
10000
35
50
S57
4.69
3300
30
35
S44
2.69
2700
30
25
S42
1.93
12000
35
45
S56
5.03
3300
30
40
S45
2.78
2700
35
20
S51
2.05
12000
35
50
S57
5.14
3300
35
25
S52
2.66
3300
22
35
S24
2.12
15000
35
50
S57
5.74
3300
35
30
S53
2.71
3300
22
40
S25
2.18
560
22
20
S21
0.85
3300
22
50
S27
2.32
680
22
20
S21
0.94
80
3900
22
50
S27
2.90
3900
25
40
S35
2.79
3300
25
30
S33
2.14
820
22
20
S21
1.03
3900
25
45
S36
2.92
3300
25
35
S34
2.20
820
22
25
S22
1.11
3900
30
35
S44
2.92
3300
25
40
S35
2.27
820
25
20
S31
1.07
3900
30
40
S45
3.02
3300
30
25
S42
2.13
1000
22
25
S22
1.23
3900
30
45
S46
3.12
3300
30
30
S43
2.24
1000
25
20
S31
1.18
3900
35
30
S53
2.95
3300
35
20
S51
2.26
1200
22
25
S22
1.34
3900
35
35
S54
3.07
3300
35
25
S52
2.41
1200
22
30
S23
1.39
4700
25
50
S37
3.29
3900
22
40
S25
2.37
1200
25
20
S31
1.29
4700
30
40
S45
3.32
3900
22
45
S26
2.42
1200
25
25
S32
1.39
4700
30
45
S46
3.43
3900
25
35
S34
2.39
1200
30
20
S41
1.38
4700
30
50
S47
3.56
3900
25
40
S35
2.47
3900
25
45
S36
2.54
80
1500
22
30
S23
1.55
4700
35
30
S53
3.23
1500
22
35
S24
1.61
4700
35
35
S54
3.37
3900
30
25
S42
2.32
1500
25
25
S32
1.55
4700
35
40
S55
3.50
3900
30
30
S43
2.44
1500
25
30
S33
1.62
5600
30
45
S46
3.74
3900
30
35
S44
2.55
1500
30
20
S41
1.55
5600
30
50
S47
3.89
3900
35
25
S52
2.62
1500
35
20
S51
1.68
5600
35
35
S54
3.68
4700
22
45
S26
2.65
1800
22
30
S23
1.70
5600
35
40
S55
3.82
4700
22
50
S27
2.77
1800
22
35
S24
1.76
5600
35
45
S56
3.87
4700
25
40
S35
2.71
1800
22
40
S25
1.83
6800
30
50
S47
4.03
4700
25
45
S36
2.79
1800
25
25
S32
1.70
6800
35
40
S55
3.93
4.03
4700
25
50
S37
2.88
1800
25
30
S33
1.77
6800
35
45
S56
4700
30
30
S43
2.67
1800
30
20
S41
1.69
6800
35
50
S57
4.19
4700
30
35
S44
2.80
1800
30
25
S42
1.81
8200
35
45
S56
4.32
4700
30
40
S45
2.90
1800
35
20
S51
1.84
8200
35
50
S57
4.60
4700
35
25
S52
2.72
2200
22
35
S24
1.95
10000
35
50
S57
5.08
(Note) Rated ripple current : 105℃ , 120Hz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
LAZ, LTZ
LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS
Standard Ratings
Rated
Rated
voltage capacitance
(V)
(µF)
100
Case(mm)
D
L
Casing
Symbol
Rated ripple
current
(Arms)
Rated
Rated
voltage capacitance
(V)
(µF)
Case(mm)
D
L
Casing
Symbol
Rated ripple
current
(Arms)
390
22
20
S21
0.83
1800
25
45
S36
2.28
470
22
20
S21
0.91
1800
30
25
S42
2.09
560
22
20
S21
0.99
1800
30
30
S43
2.19
560
22
25
S22
1.07
1800
30
35
S44
2.27
560
25
20
S31
1.04
1800
35
25
S52
2.27
680
22
25
S22
1.18
2200
22
45
S26
2.41
680
25
20
S31
1.14
2200
22
50
S27
2.52
820
22
25
S22
1.29
2200
25
40
S35
2.46
820
22
30
S23
1.35
2200
25
45
S36
2.52
820
25
20
S31
1.26
2200
25
50
S37
2.57
820
25
25
S32
1.35
2200
30
30
S43
2.42
820
30
20
S41
1.32
2200
30
35
S44
2.51
1000
22
30
S23
1.49
2200
30
40
S45
2.59
1000
22
35
S24
1.54
2200
35
25
S52
2.51
1000
25
25
S32
1.49
2200
35
30
S53
2.56
1000
25
30
S33
1.56
2700
25
45
S36
2.79
1000
30
20
S41
1.46
2700
25
50
S37
2.85
1000
35
20
S51
1.59
2700
30
35
S44
2.78
1200
22
30
S23
1.63
2700
30
40
S45
2.87
1200
22
35
S24
1.69
2700
30
45
S46
2.94
1200
22
40
S25
1.74
1200
25
25
S32
1.63
100
2700
35
30
S53
2.79
2700
35
35
S54
2.90
1200
25
30
S33
1.71
3300
25
50
S37
3.15
1200
25
35
S34
1.76
3300
30
40
S45
3.17
1200
30
20
S41
1.60
3300
30
45
S46
3.25
1200
30
25
S42
1.71
3300
30
50
S47
3.32
1200
35
20
S51
1.74
3300
35
30
S53
3.09
1500
22
35
S24
1.89
3300
35
35
S54
3.21
1500
22
40
S25
1.95
3300
35
40
S55
3.31
1500
22
45
S26
1.99
3900
30
45
S46
3.53
1500
25
30
S33
1.91
3900
30
50
S47
3.61
1500
25
35
S34
1.97
3900
35
35
S54
3.49
1500
25
40
S35
2.03
3900
35
40
S55
3.60
1500
30
25
S42
1.91
3900
35
45
S56
3.69
1500
30
30
S43
2.00
4700
30
50
S47
3.96
1500
35
20
S51
1.94
4700
35
40
S55
3.95
1500
35
25
S52
2.07
4700
35
45
S56
4.05
1800
22
40
S25
2.13
4700
35
50
S57
4.14
1800
22
45
S26
2.18
5600
35
45
S56
4.42
1800
25
35
S34
2.16
5600
35
50
S57
4.52
1800
25
40
S35
2.22
6800
35
50
S57
4.98
(Note) Rated ripple current : 105℃ , 120Hz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
LAZ, LTZ
LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS
Standard Ratings
Rated
Rated
voltage capacitance
(V)
(µF)
160
Case(mm)
D
L
Casing
Symbol
Rated ripple
current
(Arms)
Rated
Rated
voltage capacitance
(V)
(µF)
Case(mm)
D
L
Casing
Symbol
Rated ripple
current
(Arms)
Rated
Rated
voltage capacitance
(V)
(µF)
Case(mm)
D
L
Casing
Symbol
Rated ripple
current
(Arms)
180
22
20
S21
0.82
1200
35
25
S52
2.69
560
30
25
S42
1.69
220
22
20
S21
0.90
1200
35
30
S53
2.95
560
35
20
S51
1.66
220
25
20
S31
1.02
1500
22
60
S29
3.41
680
22
35
S24
1.90
270
22
20
S21
1.00
1500
25
45
S36
3.25
680
22
40
S25
1.97
270
25
20
S31
1.13
1500
25
50
S37
3.38
680
22
45
S26
2.01
330
22
20
S21
1.10
1500
30
35
S44
3.10
680
22
50
S27
2.06
330
22
25
S22
1.24
1500
30
40
S45
3.21
680
25
30
S33
1.91
330
25
20
S31
1.25
1500
30
45
S46
3.57
680
25
35
S34
1.95
390
22
25
S22
1.35
1500
35
30
S53
3.06
680
25
40
S35
2.01
390
22
30
S23
1.41
1500
35
35
S54
3.21
680
30
25
S42
1.86
390
25
20
S31
1.36
1800
25
55
S38
3.84
680
30
30
S43
1.97
390
25
25
S32
1.45
1800
30
40
S45
3.52
680
35
20
S51
1.83
390
30
20
S41
1.37
1800
30
45
S46
3.91
680
35
25
S52
1.92
470
22
25
S22
1.48
1800
30
50
S47
4.07
820
22
40
S25
2.17
470
22
30
S23
1.50
470
22
35
S24
1.58
160
1800
35
30
S53
3.35
820
22
45
S26
2.21
1800
35
35
S54
3.52
820
25
35
S34
2.14
470
25
25
S32
1.53
1800
35
40
S55
3.94
820
25
40
S35
2.20
470
30
20
S41
1.50
1800
35
45
S56
4.15
820
25
45
S36
2.26
560
22
30
S23
1.68
2200
30
45
S46
4.03
820
30
25
S42
2.04
560
22
35
S24
1.75
2200
30
50
S47
4.16
820
30
30
S43
2.17
560
25
25
S32
1.63
2200
35
35
S54
3.89
820
30
35
S44
2.20
560
25
30
S33
1.73
2200
35
40
S55
4.36
820
35
20
S51
2.01
2.11
560
30
20
S41
1.63
2200
35
45
S56
4.59
820
35
25
S52
560
35
20
S51
1.82
2200
35
50
S57
4.87
1000
22
45
S26
2.44
680
22
35
S24
1.93
2700
30
55
S48
4.76
1000
22
50
S27
2.50
680
22
40
S25
1.98
2700
35
50
S57
5.03
1000
25
40
S35
2.43
680
25
30
S33
1.91
3300
35
50
S57
5.47
1000
25
45
S36
2.49
680
25
35
S34
1.98
3900
35
60
S59
6.39
680
30
20
S41
1.80
180
22
20
S21
0.82
180
1000
25
50
S37
2.66
1000
30
30
S43
2.39
680
30
25
S42
1.85
220
22
20
S21
0.91
1000
30
35
S44
2.43
680
35
20
S51
2.01
220
25
20
S31
1.03
1000
30
40
S45
2.46
820
22
35
S24
2.08
270
22
20
S21
1.00
1000
35
25
S52
2.33
820
22
40
S25
2.17
270
22
25
S22
1.13
1000
35
30
S53
2.42
820
22
50
S27
2.35
270
25
20
S31
1.14
1200
22
55
S28
2.85
820
25
30
S33
2.09
330
22
25
S22
1.25
1200
25
45
S36
2.73
820
25
35
S34
2.17
330
22
30
S23
1.30
1200
30
35
S44
2.66
820
25
40
S35
2.35
330
25
20
S31
1.20
1200
30
40
S45
2.69
820
30
25
S42
2.03
330
30
20
S41
1.26
1200
30
45
S46
2.79
820
30
30
S43
2.35
390
22
25
S22
1.35
1200
35
25
S52
2.55
820
35
20
S51
2.20
390
22
30
S23
1.41
1200
35
30
S53
2.65
820
35
25
S52
2.35
390
25
20
S31
1.29
1200
35
35
S54
2.70
1000
22
45
S26
2.42
1000
25
35
S34
2.40
180
390
25
25
S32
1.42
1500
25
50
S37
3.12
390
30
20
S41
1.37
1500
30
40
S45
3.01
1000
25
40
S35
2.47
470
22
30
S23
1.55
1500
30
45
S46
3.12
1000
25
45
S36
2.65
470
22
35
S24
1.58
1500
30
50
S47
3.23
1000
30
30
S43
2.45
470
25
25
S32
1.56
1500
35
30
S53
2.96
1000
30
35
S44
2.52
470
25
30
S33
1.62
1500
35
35
S54
3.02
1000
35
25
S52
2.60
470
30
20
S41
1.50
1500
35
40
S55
3.08
1000
35
30
S53
2.75
470
35
20
S51
1.52
1800
25
60
S39
3.83
3.42
1200
22
50
S27
2.84
560
22
30
S23
1.69
1800
30
45
S46
1200
25
40
S35
2.84
560
22
35
S24
1.73
1800
35
35
S54
3.31
1200
25
45
S36
2.90
560
22
40
S25
1.79
1800
35
40
S55
3.37
1200
25
50
S37
3.02
560
25
25
S32
1.67
1800
35
45
S56
3.47
1200
30
30
S43
2.84
560
25
30
S33
1.74
2200
30
50
S47
3.83
1200
30
35
S44
2.96
560
25
35
S34
1.77
2200
35
40
S55
3.73
1200
30
40
S45
3.10
560
30
20
S41
1.64
2200
35
45
S56
3.84
(Note) Rated ripple current : 105℃ , 120Hz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
LAZ, LTZ
LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS
Standard Ratings
Rated
Rated
voltage capacitance
(V)
(µF)
180
200
Case(mm)
D
L
Casing
Symbol
Rated ripple
current
(Arms)
Rated
Rated
voltage capacitance
(V)
(µF)
Case(mm)
D
L
Casing
Symbol
Rated ripple
current
(Arms)
Rated
Rated
voltage capacitance
(V)
(µF)
Case(mm)
D
L
Casing
Symbol
Rated ripple
current
(Arms)
2200
35
50
S57
3.87
1000
25
45
S36
2.49
330
35
20
S51
1.30
2700
30
60
S49
4.64
1000
25
50
S37
2.57
390
22
30
S23
1.38
2700
35
45
S56
4.25
1000
30
30
S43
2.39
390
22
35
S24
1.52
2700
35
50
S57
4.29
1000
30
35
S44
2.40
390
22
40
S25
1.57
3300
35
55
S58
4.92
1000
30
40
S45
2.46
390
22
45
S26
1.60
150
22
20
S21
0.76
1000
30
45
S46
2.55
390
25
25
S32
1.38
180
22
20
S21
0.82
1000
35
25
S52
2.29
390
25
30
S33
1.41
220
22
20
S21
0.91
1000
35
30
S53
2.40
390
25
35
S34
1.61
220
25
20
S31
1.03
1200
22
60
S29
2.93
390
30
20
S41
1.37
270
22
20
S21
1.00
1200
25
50
S37
2.82
390
30
25
S42
1.47
270
22
25
S22
1.17
1200
30
35
S44
2.63
390
35
20
S51
1.41
270
25
20
S31
1.09
1200
30
40
S45
2.69
470
22
35
S24
1.58
270
30
20
S41
1.14
1200
30
45
S46
2.79
470
22
40
S25
1.64
330
22
25
S22
1.29
1200
30
50
S47
2.89
470
22
50
S27
1.72
330
22
30
S23
1.30
1200
35
30
S53
2.63
470
25
30
S33
1.61
330
25
20
S31
1.18
1200
35
35
S54
2.65
470
25
35
S34
1.63
330
25
25
S32
1.30
390
22
25
S22
1.35
200
1200
35
40
S55
2.76
470
25
40
S35
1.73
1500
25
60
S39
3.49
470
30
25
S42
1.61
390
22
30
S23
1.40
1500
30
40
S45
3.01
470
30
30
S43
1.65
390
25
25
S32
1.37
1500
30
45
S46
3.12
470
35
20
S51
1.55
390
30
20
S41
1.37
1500
30
50
S47
3.23
470
35
25
S52
1.65
470
22
30
S23
1.53
1500
35
35
S54
2.97
560
22
40
S25
1.79
1.82
470
22
35
S24
1.61
1500
35
40
S55
3.45
560
22
45
S26
470
22
40
S25
1.75
1500
35
45
S56
3.65
560
25
35
S34
1.77
470
25
25
S32
1.50
1800
30
50
S47
3.54
560
25
40
S35
1.82
470
25
30
S33
1.56
1800
35
40
S55
3.59
560
25
45
S36
1.87
470
30
20
S41
1.50
1800
35
45
S56
4.00
560
30
25
S42
1.69
470
30
25
S42
1.60
1800
35
50
S57
4.16
470
35
20
S51
1.67
2200
30
60
S49
4.19
250
560
30
30
S43
1.80
560
30
35
S44
1.85
560
22
35
S24
1.73
2200
35
45
S56
4.13
560
35
25
S52
1.80
560
22
45
S26
1.82
2200
35
50
S57
4.60
560
35
30
S53
1.85
560
25
30
S33
1.70
2700
35
50
S57
5.09
680
22
45
S26
2.01
560
25
35
S34
1.77
3300
35
60
S59
6.03
680
22
50
S27
2.06
560
30
25
S42
1.75
120
22
20
S21
0.67
680
25
40
S35
2.01
560
35
20
S51
1.82
150
22
20
S21
0.75
680
25
45
S36
2.06
680
22
40
S25
1.97
150
25
20
S31
0.92
680
25
50
S37
2.20
680
22
50
S27
2.06
180
22
20
S21
0.82
680
30
30
S43
1.98
680
25
30
S33
1.87
180
22
25
S22
1.00
680
30
35
S44
2.04
680
25
35
S34
1.95
180
25
20
S31
1.01
680
30
40
S45
2.20
680
25
40
S35
2.01
220
22
25
S22
1.11
680
35
25
S52
1.98
680
30
25
S42
1.92
220
22
30
S23
1.20
680
35
30
S53
2.04
680
30
30
S43
1.97
220
25
20
S31
1.02
820
22
55
S28
2.34
680
35
20
S51
1.92
220
25
25
S32
1.12
820
25
45
S36
2.26
680
35
25
S52
1.96
820
22
45
S26
2.21
250
220
30
20
S41
1.03
820
25
50
S37
2.42
270
22
25
S22
1.13
820
30
35
S44
2.24
820
25
35
S34
2.14
270
22
30
S23
1.25
820
30
40
S45
2.42
820
25
40
S35
2.20
270
22
35
S24
1.37
820
30
45
S46
2.50
820
25
45
S36
2.26
270
25
25
S32
1.15
820
35
30
S53
2.24
820
25
50
S37
2.41
270
30
20
S41
1.14
820
35
35
S54
2.35
2.57
820
30
25
S42
2.04
330
22
30
S23
1.30
1000
25
50
S37
820
30
30
S43
2.17
330
22
35
S24
1.50
1000
30
40
S45
2.67
820
30
35
S44
2.18
330
22
40
S25
1.54
1000
30
45
S46
2.69
820
35
25
S52
2.07
330
25
25
S32
1.27
1000
30
50
S47
2.71
820
35
30
S53
2.18
330
25
30
S33
1.33
1000
35
30
S53
2.47
1000
22
50
S27
2.50
330
30
20
S41
1.26
1000
35
35
S54
2.60
1000
25
40
S35
2.43
330
30
25
S42
1.35
1000
35
40
S55
2.90
(Note) Rated ripple current : 105℃ , 120Hz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
LAZ, LTZ
LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS
Standard Ratings
Rated
Rated
voltage capacitance
(V)
(µF)
250
350
Case(mm)
D
L
Casing
Symbol
Rated ripple
current
(Arms)
Rated
Rated
voltage capacitance
(V)
(µF)
Case(mm)
D
L
Casing
Symbol
Rated ripple
current
(Arms)
Rated
Rated
voltage capacitance
(V)
(µF)
Case(mm)
D
L
Casing
Symbol
Rated ripple
current
(Arms)
1200
30
45
S46
2.79
390
35
25
S52
1.43
150
35
20
S51
0.99
1200
30
50
S47
2.89
390
35
30
S53
1.51
180
22
30
S23
1.10
1200
35
35
S54
2.85
470
22
55
S28
1.78
180
22
35
S24
1.13
1200
35
40
S55
3.18
470
25
45
S36
1.71
180
22
45
S26
1.19
1200
35
45
S56
3.30
470
25
50
S37
1.83
180
25
25
S32
1.09
1500
30
55
S48
3.35
470
30
35
S44
1.67
180
25
30
S33
1.11
1500
35
40
S55
3.28
470
30
40
S45
1.69
180
25
35
S34
1.16
1500
35
45
S56
3.69
470
35
30
S53
1.66
180
25
40
S35
1.19
1500
35
50
S57
3.80
470
35
35
S54
1.69
180
30
20
S41
1.07
1800
35
50
S57
4.16
560
25
50
S37
1.90
180
30
25
S42
1.10
2200
35
60
S59
4.93
560
30
40
S45
1.84
180
30
30
S43
1.17
82
22
20
S21
0.55
560
35
30
S53
1.81
180
35
20
S51
1.08
100
22
20
S21
0.61
100
22
25
S22
0.69
350
560
35
35
S54
1.85
180
35
25
S52
1.12
680
22
60
S29
2.21
220
22
35
S24
1.25
100
25
20
S31
0.69
680
30
45
S46
2.10
220
22
40
S25
1.29
120
22
20
S21
0.67
680
30
50
S47
2.18
220
22
50
S27
1.35
120
22
25
S22
0.75
680
35
35
S54
2.04
220
25
30
S33
1.23
120
25
20
S31
0.72
680
35
40
S55
2.07
220
25
35
S34
1.28
150
22
25
S22
0.84
680
35
45
S56
2.14
220
25
40
S35
1.31
150
22
30
S23
0.88
820
30
50
S47
2.32
220
25
45
S36
1.35
150
25
20
S31
0.79
820
35
40
S55
2.28
220
30
25
S42
1.22
150
25
25
S32
0.88
820
35
45
S56
2.34
220
30
30
S43
1.25
1.31
150
30
20
S41
0.85
1000
30
60
S49
2.72
220
30
35
S44
180
22
30
S23
0.96
1000
35
50
S57
2.61
220
35
20
S51
1.20
180
22
35
S24
0.98
1200
35
55
S58
2.96
220
35
25
S52
1.23
180
25
25
S32
0.97
47
22
20
S21
0.48
270
22
40
S25
1.43
180
25
30
S33
0.99
56
22
20
S21
0.53
270
22
45
S26
1.46
180
30
20
S41
0.93
68
22
20
S21
0.58
180
35
20
S51
0.94
68
22
25
S22
0.65
400
270
25
35
S34
1.42
270
25
40
S35
1.45
220
22
30
S23
1.06
68
25
20
S31
0.66
270
25
45
S36
1.49
220
22
35
S24
1.08
82
22
20
S21
0.64
270
25
50
S37
1.60
220
25
25
S32
1.07
82
22
25
S22
0.71
270
30
25
S42
1.35
220
25
30
S33
1.09
82
22
30
S23
0.74
270
30
30
S43
1.39
220
30
20
S41
1.03
82
25
20
S31
0.68
270
30
35
S44
1.45
220
30
25
S42
1.06
82
25
25
S32
0.75
270
30
40
S45
1.47
220
35
20
S51
1.04
100
22
25
S22
0.79
270
35
25
S52
1.37
270
22
35
S24
1.20
100
22
30
S23
0.82
270
35
30
S53
1.41
270
22
40
S25
1.24
100
25
20
S31
0.75
330
22
50
S27
1.65
270
25
30
S33
1.21
100
25
25
S32
0.81
330
25
40
S35
1.61
270
25
35
S34
1.23
270
30
25
S42
1.17
400
100
30
20
S41
0.80
330
25
45
S36
1.65
120
22
25
S22
0.86
330
25
50
S37
1.70
270
30
30
S43
1.24
120
22
30
S23
0.90
330
30
30
S43
1.53
270
35
20
S51
1.15
120
22
35
S24
0.92
330
30
35
S44
1.61
270
35
25
S52
1.19
120
25
20
S31
0.82
330
30
40
S45
1.62
330
22
40
S25
1.37
120
25
25
S32
0.88
330
30
45
S46
1.68
330
22
45
S26
1.40
120
25
30
S33
0.91
330
35
25
S52
1.51
330
25
35
S34
1.36
120
30
20
S41
0.87
330
35
30
S53
1.56
330
25
40
S35
1.40
120
30
25
S42
0.90
330
35
35
S54
1.62
330
30
25
S42
1.29
150
22
30
S23
0.99
390
22
60
S29
1.92
1.79
330
30
30
S43
1.37
150
22
35
S24
1.03
390
25
45
S36
330
35
25
S52
1.31
150
22
40
S25
1.07
390
25
50
S37
1.85
390
22
50
S27
1.56
150
25
25
S32
0.99
390
30
35
S44
1.75
390
25
40
S35
1.52
150
25
30
S33
1.01
390
30
40
S45
1.77
390
25
45
S36
1.56
150
25
35
S34
1.05
390
30
45
S46
1.83
390
30
30
S43
1.49
150
30
20
S41
0.98
390
30
50
S47
1.90
390
30
35
S44
1.52
150
30
25
S42
1.00
390
35
30
S53
1.69
(Note) Rated ripple current : 105℃ , 120Hz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
LAZ, LTZ
LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS
Standard Ratings
Rated
Rated
voltage capacitance
(V)
(µF)
400
450
Case(mm)
D
L
Casing
Symbol
Rated ripple
current
(Arms)
Rated
Rated
voltage capacitance
(V)
(µF)
Case(mm)
D
L
Casing
Symbol
Rated ripple
current
(Arms)
Rated
Rated
voltage capacitance
(V)
(µF)
Case(mm)
D
L
Casing
Symbol
Rated ripple
current
(Arms)
390
35
35
S54
1.76
100
30
25
S42
0.82
220
30
35
S44
1.31
390
35
40
S55
1.81
120
22
30
S23
0.90
220
30
40
S45
1.33
470
25
55
S38
2.18
120
22
35
S24
0.92
220
35
25
S52
1.23
470
30
40
S45
1.94
120
22
40
S25
0.95
220
35
30
S53
1.29
470
30
45
S46
2.01
120
22
45
S26
0.97
270
22
50
S27
1.50
470
30
50
S47
2.05
120
25
25
S32
0.88
270
25
40
S35
1.45
470
35
35
S54
1.93
120
25
30
S33
0.93
270
25
45
S36
1.49
470
35
40
S55
1.98
120
25
35
S34
0.95
270
30
30
S43
1.43
470
35
45
S56
2.04
120
30
20
S41
0.87
270
30
35
S44
1.45
560
30
45
S46
2.19
120
30
25
S42
0.90
270
30
40
S45
1.47
560
30
50
S47
2.27
120
35
20
S51
0.89
270
30
45
S46
1.52
560
35
35
S54
2.11
150
22
35
S24
1.03
270
35
25
S52
1.37
560
35
40
S55
2.16
150
22
45
S26
1.09
270
35
30
S53
1.44
560
35
45
S56
2.30
150
22
50
S27
1.12
270
35
35
S54
1.46
560
35
50
S57
2.48
150
25
30
S33
1.03
330
25
50
S37
1.76
680
30
55
S48
2.59
150
25
35
S34
1.05
330
30
35
S44
1.61
680
35
40
S55
2.39
150
25
40
S35
1.07
330
30
40
S45
1.62
680
35
45
S56
2.53
150
30
25
S42
1.00
330
30
50
S47
1.90
820
35
50
S57
3.00
1000
35
55
S58
3.43
450
150
30
30
S43
1.05
150
35
20
S51
0.99
450
330
35
30
S53
1.60
330
35
35
S54
1.62
56
22
20
S21
0.53
150
35
25
S52
1.02
390
25
55
S38
1.98
56
22
25
S22
0.59
180
22
40
S25
1.17
390
30
40
S45
1.77
1.83
68
22
20
S21
0.58
180
22
50
S27
1.22
390
30
45
S46
68
22
25
S22
0.65
180
25
30
S33
1.13
390
35
35
S54
1.76
68
22
30
S23
0.68
180
25
35
S34
1.16
390
35
40
S55
2.00
68
25
20
S31
0.66
180
25
40
S35
1.19
470
30
45
S46
2.01
68
25
25
S32
0.68
180
25
45
S36
1.24
470
30
50
S47
2.13
82
22
25
S22
0.71
180
30
25
S42
1.10
470
35
35
S54
1.93
82
22
30
S23
0.74
180
30
30
S43
1.14
470
35
40
S55
2.20
82
22
35
S24
0.76
180
30
35
S44
1.19
470
35
45
S56
2.27
82
25
20
S31
0.68
180
35
20
S51
1.08
560
30
45
S46
2.19
82
25
25
S32
0.73
180
35
25
S52
1.12
560
30
50
S47
2.27
100
22
25
S22
0.79
220
22
45
S26
1.32
560
35
35
S54
2.11
100
22
30
S23
0.82
220
25
35
S34
1.28
560
35
40
S55
2.40
100
22
35
S24
0.84
220
25
40
S35
1.31
560
35
45
S56
2.48
100
22
40
S25
0.87
220
25
45
S36
1.35
680
35
50
S57
2.61
100
25
25
S32
0.81
220
25
50
S37
1.46
820
35
60
S59
3.07
100
25
30
S33
0.86
220
30
25
S42
1.22
100
30
20
S41
0.80
220
30
30
S43
1.27
(Note) Rated ripple current : 105℃ , 120Hz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
LAZ, LTZ
LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS
Standard Ratings
Rated
Rated
voltage capacitance
(V)
(µF)
500
Case(mm)
D
L
Casing
Symbol
Rated ripple
current
(Arms)
Rated
Rated
voltage capacitance
(V)
(µF)
Case(mm)
D
L
Casing
Symbol
Rated ripple
current
(Arms)
39
22
20
S21
0.44
150
35
20
S51
0.99
47
22
20
S21
0.48
150
35
25
S52
1.02
47
25
20
S31
0.55
180
22
45
S26
1.19
56
22
20
S21
0.53
180
22
50
S27
1.22
56
22
25
S22
0.59
180
25
40
S35
1.19
56
25
20
S31
0.57
180
25
45
S36
1.22
68
22
25
S22
0.65
180
30
30
S43
1.14
68
22
30
S23
0.68
180
30
35
S44
1.16
68
25
20
S31
0.62
180
35
25
S52
1.12
68
25
25
S32
0.68
180
35
30
S53
1.15
68
30
20
S41
0.66
220
22
55
S28
1.40
82
22
25
S22
0.71
220
25
45
S36
1.35
82
22
30
S23
0.74
220
25
50
S37
1.39
82
25
25
S32
0.73
220
30
35
S44
1.31
82
25
30
S33
0.77
220
30
40
S45
1.33
82
30
20
S41
0.72
220
35
25
S52
1.23
100
22
30
S23
0.82
100
22
35
S24
0.84
500
220
35
30
S53
1.27
270
25
50
S37
1.54
100
25
25
S32
0.81
270
30
40
S45
1.47
100
25
30
S33
0.85
270
30
45
S46
1.52
100
30
20
S41
0.80
270
35
30
S53
1.41
100
30
25
S42
0.82
270
35
35
S54
1.46
100
35
20
S51
0.81
330
25
60
S39
1.88
120
22
35
S24
0.92
330
30
45
S46
1.68
120
22
40
S25
0.95
330
30
50
S47
1.71
120
25
30
S33
0.92
330
35
35
S54
1.62
120
25
35
S34
0.95
330
35
40
S55
1.66
120
30
25
S42
0.90
390
30
50
S47
1.77
120
30
30
S43
0.93
390
35
40
S55
1.81
120
35
20
S51
0.89
390
35
45
S56
1.86
150
22
40
S25
1.07
470
30
60
S49
2.23
150
22
45
S26
1.09
470
35
45
S56
2.04
150
25
35
S34
1.05
470
35
50
S57
2.06
150
25
40
S35
1.08
560
35
50
S57
2.25
680
35
60
S59
2.66
150
30
25
S42
1.00
150
30
30
S43
1.02
(Note) Rated ripple current : 105℃ , 120Hz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
LAX
LAX, LTX
LARGE CAPACITANCE
ALUMINUM ELECTROLYTIC
CAPACITORS
LARGE CAPACITANCE
ALUMINUM ELECTROLYTIC
CAPACITORS
Ultra Long Life, High-Reliability Capacitors
●
●
●
GREEN
CAP
®
105˚C
5000hours
Ultra Long Life, high-reliability capacitors.
Guarantees 5000 hours at 105°
C.
Best suited to On-Coard-Charger for EV, PHEV.
Long life
LAX
LAZ
Marking color : White print on a black sleeve
Specifications
Performance
−25 to +105
±20
Item
Category temperature range (℃)
Tolerance at rated capacitance (%)
Leakage current (µA)
(max.)
(20℃,120Hz)
3√ ̄
CV (after 5 minutes) C : Rated capacitance (µF) ; V : Rated voltage (V)
Rated voltage (V)
tanδ (max.)
Tangent of loss angle
(tanδ)
160 to 250
0.15
(20℃)
350 to 500
0.20
(20℃,120Hz)
Percentage of capacitance change (%)
Characteristics at high
Impedance ratio (max.)
and low temperature
Within ±30% of the value at 20℃
4
−25℃
Z−25℃/Z+20℃
(120Hz)
Endurance (105℃)
(Applied ripple current)
Shelf life (105℃)
Test time
Leakage current
Percentage of capacitance change
Tangent of the loss angle
5000 hours
The initial specified value or less
Within ±20% of initial value
200% or less of the initial specified value
Test time
Leakage current
Percentage of capacitance change
Tangent of the loss angle
1000 hours
The initial specified value or less
Within ±15% of initial value
150% or less of the initial specified value
Voltage application treatment : According to JIS C5101-4 4.1
JIS C5101 - 1,- 4 (IEC 60384 - 1,- 4)
Applicable standards
Outline Drawing
Unit: mm
2‒φ2
Sleeve
10
0.
±
10
Lug terminal details
Thickness : 0.8t
0.85±0.15
4.0±0.5
Vent
(5.4)
(0.9)
(2.1)
(‒) Negative terminal indicated by
cross notching
L+2max.
(4.7)
φD+1/0
1
+0.2
1.5
−0.1
Markings
Position of PC board holes
( ) : Reference size
3.3±0.1
Three terminals type
10±0.1
φ2.5
2−φ2
4.75±0.1
Coefficient of Frequency for Rated Ripple Current
Frequency (Hz)
Part numbering system
Rated voltage (V)
series LAX, standard terminal type :200V680µF
LAX
̶ 200 V
Series code
Rated voltage
symbol
681
Rated capacitance
symbol
M
Capacitance
tolerance symbol
S34 #
Casing
symbol
B
160 to 250
350 or more
50
120
1k
10k
30k
0.81
0.77
1
1
1.32
1.30
1.45
1.41
1.50
1.43
Optional
symbol
series LTX, three terminals type :400V330µF
LTX
̶ 400 V
Series code
Rated voltage
symbol
331
Rated capacitance
symbol
M
Capacitance
tolerance symbol
S53 #
Casing
symbol
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
B
Optional
symbol
CAT.No.2021/2022E
LAX, LTX
LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS
Standard Ratings
Rated
Rated
voltage capacitance
(V)
(µF)
160
Case(mm)
D
L
Casing
Symbol
Rated ripple
current
(Arms)
Rated
Rated
voltage capacitance
(V)
(µF)
Case(mm)
D
L
Casing
Symbol
Rated ripple
current
(Arms)
Rated
Rated
voltage capacitance
(V)
(µF)
Case(mm)
D
L
Casing
Symbol
Rated ripple
current
(Arms)
220
22
20
S21
0.90
1000
35
25
S52
2.60
680
22
35
S24
1.90
270
22
20
S21
1.00
1000
35
35
S54
2.89
680
22
40
S25
1.97
270
22
25
S22
1.12
1200
22
50
S27
2.84
680
25
30
S33
1.91
270
25
20
S31
1.13
1200
25
45
S36
2.90
680
25
35
S34
1.95
330
22
25
S22
1.24
1200
30
30
S43
2.84
680
30
25
S42
1.86
330
22
30
S23
1.29
1200
30
35
S44
2.96
680
30
30
S43
1.97
330
25
20
S31
1.25
1200
30
50
S47
3.33
680
35
20
S51
1.83
390
22
25
S22
1.35
1200
35
25
S52
2.69
820
22
40
S25
2.17
390
22
35
S24
1.43
1200
35
30
S53
2.95
820
22
45
S26
2.21
390
25
20
S31
1.36
1500
25
50
S37
3.38
820
25
35
S34
2.14
390
25
25
S32
1.45
1500
30
40
S45
3.21
820
25
40
S35
2.20
470
22
25
S22
1.48
1500
35
30
S53
3.06
820
30
25
S42
2.04
470
22
30
S23
1.50
470
22
40
S25
1.63
160
1500
35
35
S54
3.21
820
30
30
S43
2.17
1500
35
40
S55
3.60
820
35
20
S51
2.01
470
25
25
S32
1.53
1800
25
60
S39
3.97
820
35
25
S52
2.11
470
25
30
S33
1.55
1800
30
45
S46
3.91
1000
22
45
S26
2.44
470
30
20
S41
1.50
1800
35
35
S54
3.52
1000
22
50
S27
2.50
560
22
30
S23
1.68
1800
35
50
S57
4.31
1000
25
40
S35
2.43
560
22
35
S24
1.75
2200
30
50
S47
4.16
1000
25
45
S36
2.49
560
22
45
S26
1.81
2200
35
40
S55
4.36
1000
30
30
S43
2.39
560
25
25
S32
1.63
2700
30
60
S49
4.92
1000
30
35
S44
2.43
560
25
30
S33
1.73
2700
35
50
S57
5.03
1000
35
25
S52
2.33
1000
35
30
S53
2.42
1200
22
55
S28
2.85
1200
25
45
S36
2.73
560
25
35
S34
1.76
3300
35
55
S58
5.68
560
30
20
S41
1.63
3900
35
60
S59
6.39
560
30
25
S42
1.68
180
22
20
S21
0.82
180
560
35
20
S51
1.82
220
22
20
S21
0.91
1200
25
50
S37
2.92
680
22
35
S24
1.93
270
22
20
S21
1.00
1200
30
35
S44
2.66
680
22
50
S27
2.05
270
22
25
S22
1.13
1200
30
40
S45
2.69
680
25
30
S33
1.91
270
25
20
S31
1.14
1200
35
25
S52
2.55
680
25
35
S34
1.98
330
22
25
S22
1.25
1200
35
30
S53
2.65
680
25
40
S35
2.00
330
25
20
S31
1.20
1500
25
50
S37
3.12
680
30
25
S42
1.85
390
22
25
S22
1.35
1500
30
40
S45
3.01
680
30
30
S43
1.96
390
22
30
S23
1.41
1500
30
45
S46
3.12
680
35
20
S51
2.01
390
25
20
S31
1.29
1500
35
30
S53
2.96
820
22
40
S25
2.17
390
25
25
S32
1.42
1500
35
35
S54
3.02
820
25
35
S34
2.17
820
25
45
S36
2.40
180
390
30
20
S41
1.37
1800
25
60
S39
3.83
470
22
30
S23
1.55
1800
30
45
S46
3.42
820
30
25
S42
2.03
470
22
35
S24
1.58
1800
30
50
S47
3.54
820
30
30
S43
2.35
470
25
25
S32
1.56
1800
35
35
S54
3.31
820
30
35
S44
2.45
470
25
30
S33
1.62
1800
35
40
S55
3.37
820
35
20
S51
2.20
470
30
20
S41
1.50
2200
30
50
S47
3.83
820
35
25
S52
2.35
560
22
30
S23
1.69
2200
35
40
S55
3.73
820
35
30
S53
2.49
560
22
35
S24
1.73
2200
35
45
S56
3.84
1000
22
45
S26
2.42
560
25
25
S32
1.67
2700
30
60
S49
4.64
1000
25
35
S34
2.40
560
25
30
S33
1.74
2700
35
45
S56
4.25
1000
25
40
S35
2.47
560
30
20
S41
1.64
2700
35
50
S57
4.29
1000
30
30
S43
2.45
560
30
25
S42
1.69
3300
35
55
S58
4.92
1000
30
40
S45
2.58
560
35
20
S51
1.66
(Note) Rated ripple current : 105℃ , 120Hz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
LAX, LTX
LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS
Standard Ratings
Rated
Rated
voltage capacitance
(V)
(µF)
200
Case(mm)
D
L
Casing
Symbol
Rated ripple
current
(Arms)
Rated
Rated
voltage capacitance
(V)
(µF)
Case(mm)
D
L
Casing
Symbol
Rated ripple
current
(Arms)
Rated
Rated
voltage capacitance
(V)
(µF)
Case(mm)
D
L
Casing
Symbol
Rated ripple
current
(Arms)
180
22
20
S21
0.82
1000
22
55
S28
2.59
390
25
30
S33
1.41
180
22
25
S22
0.92
1000
25
45
S36
2.49
390
25
40
S35
1.65
220
22
20
S21
0.91
1000
30
35
S44
2.40
390
30
25
S42
1.47
220
25
20
S31
1.03
1000
30
50
S47
2.64
390
35
20
S51
1.41
270
22
25
S22
1.17
1000
35
30
S53
2.40
470
22
40
S25
1.64
270
22
30
S23
1.29
1000
35
40
S55
2.52
470
25
30
S33
1.61
270
25
20
S31
1.09
1200
25
55
S38
3.02
470
25
35
S34
1.63
270
25
25
S32
1.18
1200
30
40
S45
2.69
470
25
50
S37
1.83
330
22
25
S22
1.29
1200
35
30
S53
2.63
470
30
25
S42
1.61
330
22
30
S23
1.30
1200
35
35
S54
2.65
470
30
30
S43
1.65
330
22
35
S24
1.48
1200
35
45
S56
2.84
470
30
35
S44
1.67
330
25
25
S32
1.30
1500
25
60
S39
3.49
470
35
20
S51
1.55
330
25
30
S33
1.31
330
30
20
S41
1.26
200
1500
30
45
S46
3.12
470
35
25
S52
1.65
1500
35
35
S54
2.97
470
35
30
S53
1.66
390
22
30
S23
1.40
1500
35
40
S55
3.45
560
22
45
S26
1.82
390
22
40
S25
1.65
1500
35
50
S57
3.80
560
25
35
S34
1.77
390
25
25
S32
1.37
1800
30
50
S47
3.54
560
25
40
S35
1.82
390
30
20
S41
1.37
1800
35
40
S55
3.59
560
30
30
S43
1.80
390
30
25
S42
1.41
1800
35
45
S56
4.00
560
30
40
S45
2.01
470
22
30
S23
1.53
2200
30
60
S49
4.19
560
35
25
S52
1.80
470
22
35
S24
1.61
2200
35
45
S56
4.13
560
35
35
S54
1.94
470
22
45
S26
1.79
2200
35
50
S57
4.60
680
22
50
S27
2.06
2.01
470
25
25
S32
1.50
2700
35
55
S58
5.28
680
25
40
S35
470
25
30
S33
1.56
3300
35
60
S59
6.03
680
25
45
S36
2.06
470
25
35
S34
1.62
120
22
20
S21
0.67
680
30
30
S43
1.98
470
30
20
S41
1.50
150
22
20
S21
0.75
470
30
25
S42
1.60
150
22
25
S22
0.84
250
680
30
35
S44
2.04
680
30
45
S46
2.27
470
30
30
S43
1.64
150
25
20
S31
0.92
680
35
25
S52
1.98
470
35
20
S51
1.67
180
22
20
S21
0.82
680
35
30
S53
2.04
560
22
35
S24
1.73
180
22
25
S22
1.00
680
35
40
S55
2.40
560
22
40
S25
1.79
180
22
30
S23
1.09
820
22
60
S29
2.42
560
25
30
S33
1.70
180
25
20
S31
1.01
820
25
45
S36
2.26
560
25
35
S34
1.77
180
25
25
S32
1.09
820
25
50
S37
2.42
560
25
40
S35
1.82
220
22
25
S22
1.11
820
30
35
S44
2.24
560
30
25
S42
1.75
220
22
35
S24
1.24
820
30
40
S45
2.42
560
30
35
S44
1.82
220
25
20
S31
1.02
820
30
50
S47
2.65
560
35
20
S51
1.82
270
22
25
S22
1.13
820
35
30
S53
2.24
680
22
40
S25
1.97
270
22
30
S23
1.25
820
35
35
S54
2.35
680
25
35
S34
1.95
270
22
40
S25
1.40
1000
25
55
S38
2.66
680
25
50
S37
2.20
680
30
25
S42
1.92
250
270
25
25
S32
1.15
1000
30
40
S45
2.67
270
25
30
S33
1.28
1000
30
45
S46
2.69
680
30
30
S43
1.97
270
30
20
S41
1.14
1000
35
30
S53
2.47
680
30
40
S45
2.03
270
30
25
S42
1.17
1000
35
35
S54
2.60
680
35
25
S52
1.96
330
22
30
S23
1.30
1000
35
45
S56
3.01
680
35
30
S53
2.00
330
22
35
S24
1.50
1200
30
45
S46
2.79
820
22
45
S26
2.21
330
22
45
S26
1.57
1200
30
50
S47
2.89
820
22
50
S27
2.27
330
25
25
S32
1.27
1200
35
35
S54
2.85
820
25
40
S35
2.20
330
25
30
S33
1.33
1200
35
40
S55
3.18
820
30
30
S43
2.17
330
25
35
S34
1.57
1500
30
55
S48
3.35
3.69
820
30
35
S44
2.18
330
30
20
S41
1.26
1500
35
45
S56
820
30
45
S46
2.31
330
30
30
S43
1.37
1800
35
50
S57
4.16
820
35
25
S52
2.07
330
35
20
S51
1.30
2200
35
60
S59
4.93
820
35
30
S53
2.18
390
22
35
S24
1.52
820
35
35
S54
2.19
390
22
50
S27
1.65
(Note) Rated ripple current : 105℃ , 120Hz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
LAX, LTX
LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS
Standard Ratings
Rated
Rated
voltage capacitance
(V)
(µF)
350
Case(mm)
D
L
Casing
Symbol
Rated ripple
current
(Arms)
Rated
Rated
voltage capacitance
(V)
(µF)
Case(mm)
D
L
Casing
Symbol
Rated ripple
current
(Arms)
Rated
Rated
voltage capacitance
(V)
(µF)
Case(mm)
D
L
Casing
Symbol
Rated ripple
current
(Arms)
82
22
20
S21
0.55
470
25
50
S37
1.83
180
22
35
S24
1.13
100
22
20
S21
0.61
470
30
35
S44
1.67
180
25
30
S33
1.11
100
25
20
S31
0.69
470
30
40
S45
1.69
180
25
45
S36
1.22
120
22
20
S21
0.67
470
35
30
S53
1.66
180
30
25
S42
1.10
120
22
25
S22
0.75
470
35
35
S54
1.69
180
30
35
S44
1.19
120
25
20
S31
0.72
560
25
50
S37
1.90
180
35
20
S51
1.08
150
22
25
S22
0.84
560
30
40
S45
1.84
220
22
40
S25
1.29
150
22
30
S23
0.88
560
35
30
S53
1.81
220
25
30
S33
1.23
150
25
20
S31
0.79
560
35
35
S54
1.85
220
25
35
S34
1.28
150
25
25
S32
0.88
680
22
60
S29
2.21
220
25
50
S37
1.44
150
30
20
S41
0.85
180
22
25
S22
0.92
350
680
30
45
S46
2.10
220
30
25
S42
1.22
680
30
50
S47
2.18
220
30
30
S43
1.25
180
22
30
S23
0.96
680
35
35
S54
2.04
220
30
40
S45
1.33
180
25
25
S32
0.97
680
35
40
S55
2.07
220
35
20
S51
1.20
180
25
30
S33
0.99
820
30
50
S47
2.32
220
35
25
S52
1.23
180
30
20
S41
0.93
820
35
40
S55
2.28
220
35
30
S53
1.27
180
35
20
S51
0.94
820
35
45
S56
2.34
270
22
45
S26
1.46
220
22
30
S23
1.06
1000
30
60
S49
2.72
270
25
35
S34
1.42
220
22
35
S24
1.08
1000
35
50
S57
2.61
270
25
40
S35
1.45
220
25
25
S32
1.07
1200
35
55
S58
2.96
270
30
30
S43
1.39
220
25
30
S33
1.09
56
22
20
S21
0.53
270
35
25
S52
1.37
220
30
20
S41
1.03
56
22
25
S22
0.59
270
35
35
S54
1.46
330
22
55
S28
1.71
330
25
40
S35
1.61
330
25
45
S36
1.65
220
30
25
S42
1.06
68
22
20
S21
0.58
220
35
20
S51
1.04
68
22
30
S23
0.68
270
22
35
S24
1.20
82
22
20
S21
0.64
400
270
22
40
S25
1.24
82
22
25
S22
0.71
330
30
35
S44
1.61
270
25
30
S33
1.21
82
22
35
S24
0.76
330
30
50
S47
1.74
270
25
35
S34
1.23
82
25
20
S31
0.68
330
35
25
S52
1.51
270
30
25
S42
1.17
82
25
25
S32
0.75
330
35
30
S53
1.56
270
30
30
S43
1.24
100
22
25
S22
0.79
330
35
40
S55
1.66
270
35
20
S51
1.15
100
25
20
S31
0.75
390
25
50
S37
1.85
270
35
25
S52
1.19
100
25
30
S33
0.83
390
25
55
S38
1.98
330
22
40
S25
1.37
100
30
25
S42
0.82
390
30
40
S45
1.77
330
22
45
S26
1.40
330
25
35
S34
1.36
400
120
22
25
S22
0.86
390
35
30
S53
1.69
120
22
30
S23
0.90
390
35
35
S54
1.76
330
25
40
S35
1.40
120
22
40
S25
0.95
390
35
45
S56
1.86
330
30
25
S42
1.29
120
25
25
S32
0.88
470
25
60
S39
2.25
330
30
30
S43
1.37
120
25
35
S34
0.94
470
30
45
S46
2.01
330
35
25
S52
1.31
120
30
20
S41
0.87
470
35
35
S54
1.93
390
22
50
S27
1.56
150
22
30
S23
0.99
470
35
50
S57
2.06
390
25
40
S35
1.52
150
22
35
S24
1.03
560
30
50
S47
2.27
390
25
45
S36
1.56
150
22
50
S27
1.11
560
35
40
S55
2.16
390
30
30
S43
1.49
150
25
25
S32
0.99
680
30
55
S48
2.59
390
30
35
S44
1.52
150
25
30
S33
1.01
680
35
45
S56
2.53
390
35
25
S52
1.43
150
25
40
S35
1.08
680
35
50
S57
2.73
390
35
30
S53
1.51
150
30
20
S41
0.98
820
35
50
S57
3.00
470
22
55
S28
1.78
150
30
30
S43
1.07
1000
35
60
S59
3.55
470
25
45
S36
1.71
150
35
20
S51
0.99
(Note) Rated ripple current : 105℃ , 120Hz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
LAX, LTX
LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS
Standard Ratings
Rated
Rated
voltage capacitance
(V)
(µF)
450
Case(mm)
D
L
Casing
Symbol
Rated ripple
current
(Arms)
Rated
Rated
voltage capacitance
(V)
(µF)
Case(mm)
D
L
Casing
Symbol
Rated ripple
current
(Arms)
Rated
Rated
voltage capacitance
(V)
(µF)
Case(mm)
D
L
Casing
Symbol
Rated ripple
current
(Arms)
56
22
20
S21
0.53
220
25
40
S35
1.31
100
22
35
S24
0.84
56
25
20
S31
0.60
220
30
30
S43
1.27
100
25
25
S32
0.81
68
22
20
S21
0.58
220
30
35
S44
1.31
100
25
30
S33
0.85
68
22
25
S22
0.65
220
30
45
S46
1.37
100
30
20
S41
0.80
68
22
30
S23
0.68
220
35
25
S52
1.23
100
30
25
S42
0.82
68
25
20
S31
0.66
220
35
30
S53
1.29
100
35
20
S51
0.81
82
22
25
S22
0.71
220
35
35
S54
1.32
120
22
35
S24
0.92
82
22
30
S23
0.74
270
22
50
S27
1.50
120
22
40
S25
0.95
82
22
35
S24
0.76
270
25
40
S35
1.45
120
25
30
S33
0.92
82
25
20
S31
0.68
270
25
45
S36
1.49
120
25
35
S34
0.95
82
25
25
S32
0.73
270
30
35
S44
1.45
120
30
25
S42
0.90
82
25
30
S33
0.77
270
30
40
S45
1.47
120
30
30
S43
0.93
82
30
20
S41
0.72
270
30
50
S47
1.58
120
35
20
S51
0.89
82
30
25
S42
0.74
270
35
25
S52
1.37
150
22
40
S25
1.07
100
22
25
S22
0.79
270
35
30
S53
1.44
150
22
45
S26
1.09
100
22
30
S23
0.82
270
35
40
S55
1.50
150
25
35
S34
1.05
100
22
40
S25
0.87
330
25
50
S37
1.76
150
25
40
S35
1.08
100
25
25
S32
0.81
330
30
40
S45
1.62
150
30
25
S42
1.00
100
25
35
S34
0.88
100
30
20
S41
0.80
450
330
30
45
S46
1.68
150
30
30
S43
1.02
330
35
30
S53
1.60
150
35
25
S52
1.02
120
22
30
S23
0.90
330
35
35
S54
1.62
180
22
45
S26
1.19
120
22
35
S24
0.92
330
35
45
S56
1.71
180
22
50
S27
1.22
1.19
120
22
50
S27
1.00
390
25
55
S38
1.98
180
25
40
S35
120
25
25
S32
0.88
390
30
40
S45
1.77
180
25
45
S36
1.22
120
25
30
S33
0.93
390
30
45
S46
1.83
180
30
30
S43
1.14
120
25
40
S35
0.97
390
30
50
S47
2.07
120
30
20
S41
0.87
390
35
35
S54
1.76
500
180
30
35
S44
1.16
180
35
25
S52
1.12
120
30
25
S42
0.90
390
35
40
S55
2.00
180
35
30
S53
1.15
120
30
30
S43
0.95
390
35
50
S57
2.08
220
22
55
S28
1.40
120
35
20
S51
0.89
470
30
50
S47
2.13
220
25
45
S36
1.35
150
22
35
S24
1.03
470
35
40
S55
2.20
220
25
50
S37
1.39
150
22
40
S25
1.05
470
35
45
S56
2.27
220
30
35
S44
1.31
150
25
30
S33
1.03
560
30
55
S48
2.35
220
30
40
S45
1.33
150
25
35
S34
1.05
560
35
45
S56
2.48
220
35
30
S53
1.27
150
25
45
S36
1.11
560
35
50
S57
2.50
270
25
50
S37
1.54
150
30
25
S42
1.00
680
35
50
S57
2.61
270
30
40
S45
1.47
150
30
30
S43
1.05
820
35
60
S59
3.07
270
30
45
S46
1.52
150
30
35
S44
1.08
39
22
20
S21
0.44
270
35
30
S53
1.41
150
35
20
S51
0.99
47
22
20
S21
0.48
270
35
35
S54
1.46
180
22
40
S25
1.17
47
25
20
S31
0.55
330
25
60
S39
1.88
180
22
45
S26
1.19
56
22
25
S22
0.59
330
30
45
S46
1.68
180
25
35
S34
1.16
56
25
20
S31
0.57
330
30
50
S47
1.71
180
25
50
S37
1.30
68
22
25
S22
0.65
330
35
35
S54
1.62
180
30
25
S42
1.10
180
30
30
S43
1.14
500
68
22
30
S23
0.68
330
35
40
S55
1.66
68
25
20
S31
0.62
390
30
50
S47
1.77
180
30
40
S45
1.20
68
25
25
S32
0.68
390
35
40
S55
1.81
180
35
20
S51
1.08
68
30
20
S41
0.66
390
35
45
S56
1.86
180
35
25
S52
1.12
82
22
30
S23
0.74
470
30
60
S49
2.23
180
35
30
S53
1.15
82
25
25
S32
0.73
470
35
45
S56
2.04
2.06
220
22
45
S26
1.32
82
25
30
S33
0.77
470
35
50
S57
220
22
50
S27
1.35
82
30
20
S41
0.72
560
35
55
S58
2.33
220
25
35
S34
1.28
100
22
30
S23
0.82
680
35
60
S59
2.66
(Note) Rated ripple current : 105℃ , 120Hz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
LJ6,LJ2
LJ6,LJ2
LARGECAPACITANCE
CAPACITANCEALUMINUM
ALUMINUMELECTROLYTIC
ELECTROLYTICCAPACITORS
CAPACITORS
LARGE
GREEN
CAP
Large-Capacitance, Long-Life, High-Reliability Capacitors
●
●
®
105˚C
5000hours
Large-capacitornce, Long-life, High-reliability capacitors.
Guarantees 5000 hours at 105°
C.
Large capacitance
LJ6
LAX
Marking color : White print on a black sleeve
Specifications
Performance
−25∼+105
±20
Item
Category temperature range (℃)
Tolerance at rated capacitance (%)
Leakage current (µA)
(max.)
(20℃,120Hz)
0.02CV or 5mA whichever is larger (after 5 minutes) C : Rated capacitance (µF) ; V : Rated voltage (V)
Rated voltage (V)
tanδ (max.)
Tangent of loss angle
(tanδ)
(20℃)
200 to 500
0.15
(20℃,120Hz)
Percentage of capacitance change (%)
Characteristics at high
Impedance ratio (max.)
and low temperature
ー25℃
Zー25℃/Z+20℃
Within ±30% of the value at 20℃
4
(120Hz)
Endurance (105℃)
(Applied ripple current)
Shelf life (105℃)
Test time
Leakage current
Percentage of capacitance change
Tangent of the loss angle
5000 hours
The initial specified value or less
Within ±20% of initial value
200% or less of the initial specified value
Test time
Leakage current
Percentage of capacitance change
Tangent of the loss angle
1000 hours
The initial specified value or less
Within ±15% of initial value
150% or less of the initial specified value
Voltage application treatment : According to JIS C5101-4 4.1
JIS C5101 - 1,- 4 (IEC 60384 - 1,- 4)
Applicable standards
Outline Drawing
Unit : mm
(NC)
(2.6)
(NC)
Markings
1.5±0.1
( ) : Reference size
6.3±1
LJ2
(only φ40)
Sleeve
20±0.1
(+)
20±0.1
(+)
(NC)
(NC)
Markings
(NC)
(−)
L+2max.
1.1−0.1 Thickness : 0.8t
5−φ1.3
4.5±0.5
Vent
φD+1/0
(2.1)
22.5±0.1
(−)
L+2max.
8.5±0.5
φD+1/0
Lug terminal details
Thickness : 0.8t
0.8±0.1
4−φ2
(7.5)
(+)
(6.8)
Sleeve
30°
LJ6
(φ35, 40)
(−)
4±0.1
17.5±0.1
Vent
Coefficient of Frequency for Rated Ripple Current
Frequency (Hz)
Part numbering system (example : 350V1500µF)
LJ6
Series code
̶
350
Rated voltage
symbol
V
152
M
Rated capacitance
symbol
Capacitance
tolerance symbol
S5D #
Casing
symbol
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
Rated voltage (V)
B
200 to 250
315 to 500
50
120
1k
10k
30k
0.87
0.80
1
1
1.11
1.14
1.18
1.19
1.20
1.20
Optional
symbol
CAT.No.2021/2022E
LJ6,LJ2
LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS
Standard Ratings
Rated voltage(V)
Item
Case
Casing
φD×L
(mm) symbol
35×40
S55
35×45
S56
35×50
S57
35×55
S58
35×60
S59
35×70
S5B
35×80
S5C
35×90
S5D
35×100
S5E
40×45
S66
40×50
S67
40×60
S69
40×70
S6B
40×80
S6C
200
Case
Casing
φD×L
(mm) symbol
35×45
S56
35×50
S57
35×55
S58
35×60
S59
35×65
S5A
35×70
S5B
35×75
A75
35×80
S5C
35×100
S5E
35×105
AA5
40×50
S67
40×55
S68
40×60
S69
40×70
S6B
40×75
B75
40×80
S6C
315
350
ESR
Rated ripple
current
Rated
capacitance
ESR
Rated ripple
current
Rated
capacitance
ESR
Rated ripple
current
Rated
capacitance
ESR
Rated ripple
current
(µF)
(Ω max.)
(Arms)
(µF)
(Ω max.)
(Arms)
(µF)
(Ω max.)
(Arms)
(µF)
(Ω max.)
(Arms)
-
-
2200
-
2700
-
3300
-
3900
2200
-
2700
3300
3900
-
-
0.090
-
0.073
-
0.060
-
0.051
0.090
-
0.073
0.060
0.051
-
-
4.05
-
4.77
-
5.56
-
6.64
4.40
-
5.17
6.02
7.00
-
-
-
1500
1800
2200
2700
-
-
-
1800
2200
2700
-
-
-
-
0.13
0.11
0.09
0.07
-
-
-
0.11
0.09
0.07
-
-
-
-
3.17
3.69
4.31
5.24
-
-
-
3.77
4.43
5.42
-
820
1000
1200
-
1500
1800
-
-
-
-
1200
1500
1800
-
0.24
0.20
0.17
-
0.13
0.11
-
-
-
-
0.17
0.13
0.11
-
2.23
2.62
3.03
-
3.55
4.07
-
-
-
-
3.11
3.67
4.21
-
-
-
820
-
1000
1200
-
1500
1800
-
1000
1200
1500
1800
-
-
0.24
-
0.20
0.17
-
0.13
0.11
-
0.20
0.17
0.13
0.11
-
-
2.10
-
2.46
2.84
-
3.34
3.82
-
2.50
2.90
3.40
3.95
Rated
capacitance
ESR
Rated ripple
current
Rated
capacitance
ESR
Rated ripple
current
Rated
capacitance
ESR
Rated ripple
current
(µF)
(Ω max.)
(Arms)
(µF)
(Ω max.)
(Arms)
(µF)
(Ω max.)
(Arms)
-
-
820
-
-
-
1200
-
-
1500
-
-
1000
-
1200
1500
-
-
0.24
-
-
-
0.17
-
-
0.13
-
-
0.20
-
0.17
0.13
-
-
2.49
-
-
-
3.55
-
-
4.15
-
-
3.10
-
3.65
4.30
-
560
-
680
820
-
-
1000
1200
-
680
820
1000
-
-
1200
-
0.36
-
0.29
0.24
-
-
0.20
0.17
-
0.29
0.24
0.20
-
-
0.17
-
2.16
-
2.53
2.94
-
-
3.41
3.90
-
2.45
2.84
3.33
-
-
3.65
390
-
-
560
-
680
-
-
-
-
560
-
680
820
-
-
0.51
-
-
0.36
-
0.29
-
-
-
-
0.36
-
0.29
0.24
-
-
1.65
-
-
2.22
-
2.57
-
-
-
-
2.15
-
2.51
3.05
-
-
Rated voltage(V)
Item
250
Rated
capacitance
400
450
500
(Note) Rated ripple current : 105℃ , 120Hz ; ESR. : 20℃ , 120Hz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
LM,LPM
LM,LPM
LARGE
CAPACITANCE
LARGE
CAPACITANCEALUMINUM
ALUMINUMELECTROLYTIC
ELECTROLYTICCAPACITORS
CAPACITORS
For-Inverter,High-Ripple Capacitors
●
●
GREEN
CAP
85˚C
2000hours
Withstands high-ripple current generated by the voltage doubler rectifier system.
Guarantees 2000 hours at 85℃.
High ripple
LM,
LPM
LA5
Marking color : White print on a black sleeve
Specifications
Performance
−25 to +85
±10
Item
Category temperature range (°
C)
Tolerance at rated capacitance (%)
Leakage current (µA)
(max.)
(20℃,120Hz)
0.01CV or 5mA whichever is larger (after 5 minutes) C : Rated capacitance (µF) ; V : Rated voltage (V)
Rated voltage (V)
tanδ (max.)
Tangent of loss angle
(tanδ)
(20℃)
250, 400
0.05
(20℃,120Hz)
250, 400
4
Rated voltage (V)
Impedance ratio (max.)
Zー25℃/Z+20℃
Characteristics at high
and low temperature
(120Hz)
Endurance (85℃)
(Applied ripple current)
Shelf life (85℃)
Test time
Leakage current
Percentage of capacitance change
Tangent of the loss angle
2000 hours
The initial specified value or less
Within ±20% of initial value
200% or less of the initial specified value
Test time
Leakage current
Percentage of capacitance change
Tangent of the loss angle
500 hours
The initial specified value or less
Within ±15% of initial value
150% or less of the initial specified value
Voltage application treatment : According to JIS C5101-4 4.1
Applicable standards
JIS C5101 - 1,
- 4 (IEC 60384 - 1,
- 4)
Outline Drawing
Unit : mm
LPM(snap-in type)
2‒φ2
Sleeve
10
0.
±
10
Lug terminal details
Thickness : 0.8t
0.8±0.1
6.3±1
Vent
(2.1)
(‒) Negative terminal indicated by
cross notching
L+2max.
(7.5)
(2.6)
φD+1/0
1.5±0.1
(6.8)
1
Markings
Position of PC board holes
( ) : Reference size
Sleeve
LM(lug type)
14±1
φD+1/0
Vent
12±2
L+2max.
Coefficient of Frequency for Rated Ripple Current
Part numbering system (example : 250V440µF)
LM
̶ 250 V
Series code
Rated voltage
symbol
441
Rated capacitance
symbol
K
Capacitance
tolerance symbol
Frequency (Hz)
Rated voltage (V)
S6E #
Casing
symbol
B
250, 400
50
120
400
1k
10k
0.80
1
1.32
1.46
1.61
Optional
symbol
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
LM,LPM
LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS
LM series Standard Ratings
LPM series Standard Ratings
250V
Rated
capacitance
Case(mm)
250V
Casing
symbol
ESR
Rated ripple
current
Rated
capacitance
( Ω max. )
(Arms)
(µF)
φD
L
Case(mm)
Casing
symbol
ESR
Rated ripple
current
( Ω max. )
(Arms)
(µF)
φD
L
200
40
100
S6E
0.33
3.80
100
35
40
S55
0.66
1.90
220
40
100
S6E
0.30
4.00
110
35
40
S55
0.60
2.00
330
40
100
S6E
0.20
4.85
165
35
45
S56
0.40
2.45
360
40
100
S6E
0.18
5.10
180
35
50
S57
0.37
2.58
390
40
100
S6E
0.17
5.30
195
35
50
S57
0.34
2.68
420
40
100
S6E
0.16
5.50
210
35
50
S57
0.32
2.78
440
40
100
S6E
0.15
5.60
220
35
50
S57
0.30
2.80
Casing
symbol
ESR
Rated ripple
current
Rated
capacitance
( Ω max. )
(Arms)
(µF)
φD
L
400V
Rated
capacitance
(µF)
90
100
110
150
Case(mm)
400V
ESR
Rated ripple
current
( Ω max. )
(Arms)
S57
1.47
1.50
40
S55
1.21
1.70
35
50
S57
0.88
1.98
35
50
S57
0.81
2.00
Case(mm)
φD
L
35
80
S5C
0.74
3.00
45
35
50
40
80
S6C
0.74
3.00
55
35
35
90
S5D
0.66
3.20
75
82
40
90
S6D
0.66
3.20
35
100
S5E
0.60
3.30
40
100
S6E
0.60
3.30
35
100
S5E
0.44
3.90
40
100
S6E
0.44
3.90
165
40
100
S6E
0.40
4.10
220
40
100
S6E
0.30
4.10
Casing
symbol
(Note)Rated ripple current : 85℃ , 120Hz ; ESR.:20℃ , 120Hz
(Note)Rated ripple current : 85℃ , 120Hz ; ESR.:20℃ , 120Hz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
LYX
LYX
LARGE
CAPACITANCE
ALUMINUM
ELECTROLYTIC
CAPACITORS
LARGE
CAPACITANCE
ALUMINUM
ELECTROLYTIC
CAPACITORS
Screw Terminal, Long Life, High Temperature Capacitors
●
●
GREEN
CAP
®
105˚C
5000hours
Screw Terminal, Long Life, High Temperature capacitors.
Guarantees 5000 hours at 105°
C.
Large capacitance
LYX
LJ6
Marking color : Silver print on a black sleeve
Specifications
Performance
−40 to +105
±20
Item
Category temperature range (℃)
Tolerance at rated capacitance (%)
Leakage current (µA)
(max.)
(20℃,120Hz)
0.01CV or 5mA whichever is larger (after 5 minutes) C : Rated capacitance (µF) ; V : Rated voltage (V)
Tangent of loss angle
(20℃)
0.20
(tanδ)
(20℃,120Hz)
Endurance (105℃)
(Applied ripple current)
Shelf life (105℃)
Test time
Leakage current
Percentage of capacitance change
Tangent of the loss angle
5000 hours
The initial specified value or less
Within ±20% of initial value
200% or less of the initial specified value
Test time
Leakage current
Percentage of capacitance change
Tangent of the loss angle
1000 hours
The initial specified value or less
Within ±20% of initial value
200% or less of the initial specified value
Voltage application treatment : According to JIS C5101-4 4.1
Applicable standards
JIS C5101 - 1,- 4 (IEC 60384 - 1,- 4)
Outline Drawing
Unit : mm
Sleeve
φD±1
−
Plate
L+3
Vent
F
M5
+
φD
F±1
8 max.
36
12.7
51
22.0
64
28.2
77
31.4
90
31.4
Mounting Clamp
101
41.5
Unit : mm
Code J(2ーlegs)
Code K(3ーlegs)
A
B
W1
A
W2
B
45
°
0°
12
R1
H
R2
φD
36
51
64
77
90
W1
48
68
81
93.5
108
W2
58
80
93
106
120.5
A
3.8
5
5
5
5
B
7
7
7
7
7
φD
51
64
77
90
101
R1
31.8
38.1
44.5
50.8
57.5
R2
36.5
42.6
49.2
55.6
63.5
A
5
5
5
5
6
B
7
7
7
7
8
φD
36
51∼101
H
15
30
Coefficient of Frequency for Rated Ripple Current
Frequency (Hz)
Part numbering system (example : 400V3300µF)
LYX
Series code
̶
400
Rated voltage
symbol
V
332
M
Rated capacitance
symbol
Capacitance
tolerance symbol
DD0
Casing
symbol
Rated voltage (V)
B
Optional
symbol
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
350 to 450
50
120
300
1k
10k
0.80
1
1.10
1.30
1.40
Clamp
code
CAT.No.2021/2022E
LYX
LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS
Standard Ratings
350V
Rated
capacitance
Case(mm)
400V
Casing
symbol
ESR
Rated ripple
current
Rated
capacitance
( mΩ max. )
(mArms)
Case(mm)
Casing
symbol
ESR
Rated ripple
current
( mΩ max. )
(mArms)
(µF)
φD
L
(µF)
φD
L
1000
51
75
C75
259
3.9
1000
51
75
C75
215
1200
51
75
C75
215
4.2
1200
51
96
C96
179
4.6
1500
51
96
C96
172
5.2
1500
51
115
CB5
143
5.6
6.4
3.9
1800
51
96
C96
143
5.7
1800
51
130
CD0
119
2200
51
130
CD0
117
7.1
2200
64
96
D96
98
6.9
2700
64
96
D96
96
7.7
2700
64
115
DB5
80
8.2
3300
64
115
DB5
78
9.1
3300
64
130
DD0
65
9.5
3900
64
130
DD0
66
10.4
64
155
DF5
55
11.1
64
155
DF5
55
12.2
77
115
EB5
55
11.5
64
195
DJ5
46
14.6
77
130
ED0
46
13.1
6800
77
155
EF5
38
15.5
4700
5600
3900
4700
5600
77
115
EB5
55
10.4
64
195
DJ5
46
13.4
77
130
ED0
46
12.0
64
195
DJ5
39
14.6
77
155
EF5
39
14.0
8200
90
157
FF7
31
18.1
6800
90
157
FF7
32
16.5
10000
90
157
FF7
26
19.9
8200
90
157
FF7
26
18.1
12000
90
196
FJ6
22
23.8
10000
90
196
FJ6
22
21.7
15000
90
236
FN6
17
28.8
12000
90
236
FN6
18
25.8
450V
Rated
capacitance
Case(mm)
Casing
symbol
ESR
Rated ripple
current
( mΩ max. )
(mArms)
(µF)
φD
L
1000
51
96
C96
215
4.2
1200
51
115
CB5
179
5.0
1500
51
130
CD0
143
5.9
1800
64
96
D96
119
6.3
2200
64
115
DB5
98
7.4
64
130
DD0
80
8.6
2700
3300
77
115
EB5
80
8.7
64
155
DF5
65
10.2
10.1
77
130
ED0
65
3900
64
195
DJ5
55
12.3
4700
77
155
EF5
46
12.9
15.4
77
195
EJ5
38
90
157
FF7
38
14.9
6800
90
196
FJ6
32
18.0
8200
90
196
FJ6
27
19.8
10000
90
236
FN6
22
23.6
5600
(Note)Rated ripple current : 105℃ , 120Hz ; ESR.:20℃ , 120Hz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
LYL
LYL
LARGE
CAPACITANCE
ALUMINUM
ELECTROLYTIC
CAPACITORS
LARGE
CAPACITANCE
ALUMINUM
ELECTROLYTIC
CAPACITORS
Screw Terminal, Long Life Capacitors
●
●
GREEN
CAP
®
85˚C
20000hours
Screw Terminal, Long Life capacitors.
Guarantees 20000 hours at 85°
C.
Long life
LYL
LY6
Marking color : Silver print on a black sleeve
Specifications
Performance
−40 to +85
±20
Item
Category temperature range (℃)
Tolerance at rated capacitance (%)
Leakage current (µA)
(max.)
(20℃,120Hz)
0.01CV or 5mA whichever is larger (after 5 minutes) C : Rated capacitance (µF) ; V : Rated voltage (V)
Tangent of loss angle
(20℃)
0.20
(tanδ)
(20℃,120Hz)
Endurance (85℃)
(Applied ripple current)
Shelf life (85℃)
Test time
Leakage current
Percentage of capacitance change
Tangent of the loss angle
20000 hours
The initial specified value or less
Within ±20% of initial value
200% or less of the initial specified value
Test time
Leakage current
Percentage of capacitance change
Tangent of the loss angle
1000 hours
The initial specified value or less
Within ±20% of initial value
200% or less of the initial specified value
Voltage application treatment : According to JIS C5101-4 4.1
Applicable standards
JIS C5101 - 1,- 4 (IEC 60384 - 1,- 4)
Outline Drawing
Unit : mm
Sleeve
φD±1
−
Plate
L+3
Vent
F
M5
+
φD
F±1
8 max.
36
12.7
51
22.0
64
28.2
77
31.4
90
31.4
Mounting Clamp
101
41.5
Unit : mm
Code J(2ーlegs)
Code K(3ーlegs)
A
B
W1
A
W2
B
45
°
0°
12
R1
H
R2
φD
36
51
64
77
90
W1
48
68
81
93.5
108
W2
58
80
93
106
120.5
A
3.8
5
5
5
5
B
7
7
7
7
7
φD
51
64
77
90
101
R1
31.8
38.1
44.5
50.8
57.5
R2
36.5
42.6
49.2
55.6
63.5
A
5
5
5
5
6
B
7
7
7
7
8
φD
36
51∼101
H
15
30
Coefficient of Frequency for Rated Ripple Current
Frequency (Hz)
Part numbering system (example : 450V4700µF)
LYL
Series code
̶
450
Rated voltage
symbol
V
Rated voltage (V)
472
M
EF5
B
Rated capacitance
symbol
Capacitance
tolerance symbol
Casing
symbol
Optional
symbol
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
350 to 450
50
120
300
1k
10k
0.80
1
1.10
1.30
1.40
Clamp
code
CAT.No.2021/2022E
LYL
LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS
Standard Ratings
350V
Rated
capacitance
(µF)
Case(mm)
φD
L
400V
Casing
symbol
ESR
Rated ripple
current
Rated
capacitance
( mΩ max. )
(mArms)
(µF)
φD
Case(mm)
L
Casing
symbol
ESR
Rated ripple
current
( mΩ max. )
(mArms)
1000
51
75
C75
259
3.9
1000
51
75
C75
215
1200
51
75
C75
215
4.2
1200
51
96
C96
179
3.9
4.6
1500
51
96
C96
172
5.2
1500
51
115
CB5
143
5.6
6.4
1800
51
96
C96
143
5.7
1800
51
130
CD0
119
2200
51
130
CD0
117
7.1
2200
64
96
D96
98
6.9
2700
64
96
D96
96
7.7
2700
64
115
DB5
80
8.2
3300
64
115
DB5
78
9.1
3300
64
130
DD0
65
9.5
3900
64
130
DD0
66
10.4
64
155
DF5
55
11.1
64
155
DF5
55
12.2
77
115
EB5
55
11.5
64
195
DJ5
46
14.6
77
130
ED0
46
13.1
6800
77
155
EF5
38
15.5
4700
5600
3900
4700
5600
77
115
EB5
55
10.4
64
195
DJ5
46
13.4
77
130
ED0
46
12.0
64
195
DJ5
39
14.6
77
155
EF5
39
14.0
8200
90
157
FF7
31
18.1
6800
90
157
FF7
32
16.5
10000
90
157
FF7
26
19.9
8200
90
157
FF7
26
18.1
12000
90
196
FJ6
22
23.8
10000
90
196
FJ6
22
21.7
15000
90
236
FN6
17
28.8
12000
90
236
FN6
18
25.8
450V
Rated
capacitance
Case(mm)
Casing
symbol
ESR
Rated ripple
current
( mΩ max. )
(mArms)
(µF)
φD
L
1000
51
96
C96
215
4.2
1200
51
115
CB5
179
5.0
1500
51
130
CD0
143
5.9
1800
64
96
D96
119
6.3
2200
64
115
DB5
98
7.4
64
130
DD0
80
8.6
2700
3300
77
115
EB5
80
8.7
64
155
DF5
65
10.2
10.1
77
130
ED0
65
3900
64
195
DJ5
55
12.3
4700
77
155
EF5
46
12.9
15.4
77
195
EJ5
38
90
157
FF7
38
14.9
6800
90
196
FJ6
32
18.0
8200
90
196
FJ6
27
19.8
10000
90
236
FN6
22
23.6
5600
(Note)Rated ripple current : 85℃ , 120Hz ; ESR. : 20℃ , 120Hz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
LY6
LY6
LARGE
CAPACITANCE
ALUMINUM
ELECTROLYTIC
CAPACITORS
LARGE
CAPACITANCE
ALUMINUM
ELECTROLYTIC
CAPACITORS
GREEN
CAP
Screw Terminal, Miniaturized, High Ripple Capacitors
●
●
®
85˚C
5000hours
Screw Terminal, Miniaturized, High Ripple capacitors.
Guarantees 5000 hours at 85°
C.
Miniaturized
High ripple
LY6
LY5
Marking color : Silver print on a black sleeve
Specifications
Performance
−25 to +85
±20
Item
Category temperature range (℃)
Tolerance at rated capacitance (%)
Leakage current (µA)
(max.)
(20℃,120Hz)
0.01CV or 5mA whichever is larger (after 5 minutes) C : Rated capacitance (µF) ; V : Rated voltage (V)
Rated voltage (V)
tanδ (max.)
Tangent of loss angle
(tanδ)
400, 450
0.15
(20℃)
500, 550
0.20
600
0.25
(20℃,120Hz)
Endurance (85℃)
(Applied ripple current)
Shelf life (85℃)
Test time
Leakage current
Percentage of capacitance change
Tangent of the loss angle
5000 hours
The initial specified value or less
Within ±20% of initial value
200% or less of the initial specified value
Test time
Leakage current
Percentage of capacitance change
Tangent of the loss angle
1000 hours
The initial specified value or less
Within ±20% of initial value
200% or less of the initial specified value
Voltage application treatment : According to JIS C5101-4 4.1
Applicable standards
JIS C5101 - 1,- 4 (IEC 60384 - 1,- 4)
Outline Drawing
Unit : mm
Sleeve
φD±1
−
Plate
L+3
Vent
F
M5
+
φD
F±1
8 max.
36
12.7
51
22.0
64
28.2
77
31.4
90
31.4
Mounting Clamp
101
41.5
Unit : mm
Code J(2ーlegs)
Code K(3ーlegs)
A
B
W1
A
W2
B
45
°
0°
12
R1
H
R2
φD
36
51
64
77
90
W1
48
68
81
93.5
108
W2
58
80
93
106
120.5
A
3.8
5
5
5
5
B
7
7
7
7
7
φD
51
64
77
90
101
R1
31.8
38.1
44.5
50.8
57.5
R2
36.5
42.6
49.2
55.6
63.5
A
5
5
5
5
6
B
7
7
7
7
8
φD
36
51∼101
H
15
30
Coefficient of Frequency for Rated Ripple Current
Frequency (Hz)
Part numbering system (example : 400V12000µF)
LY6
Series code
̶
400
Rated voltage
symbol
V
Rated voltage (V)
123
M
FF7
B
Rated capacitance
symbol
Capacitance
tolerance symbol
Casing
symbol
Optional
symbol
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
400 to 600
50
120
300
1k
10k
0.80
1
1.10
1.30
1.40
Clamp
code
CAT.No.2021/2022E
LY6
LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS
Standard Ratings
400V
Rated
capacitance
(µF)
Case(mm)
φD
L
450V
Casing
symbol
ESR
Rated ripple
current
Rated
capacitance
( mΩ max. )
(mArms)
(µF)
φD
Case(mm)
L
Casing
symbol
ESR
Rated ripple
current
( mΩ max. )
(mArms)
2200
51
115
CB5
98
8.8
1800
51
115
CB5
119
7.6
2700
51
130
CD0
80
10.2
2200
51
130
CD0
98
8.8
3300
64
96
D96
65
11.0
2700
64
96
D96
80
9.5
3900
64
115
DB5
55
12.8
3300
64
115
DB5
65
11.2
12.8
4700
64
130
DD0
46
14.8
3900
64
130
DD0
55
5600
77
115
EB5
38
16.2
4700
77
115
EB5
46
14.1
6800
77
130
ED0
32
18.7
5600
77
130
ED0
38
16.2
6800
77
155
EF5
32
19.1
77
195
EJ5
26
23.0
8200
77
155
EF5
26
22.0
77
195
EJ5
22
26.7
90
131
FD1
22
24.2
12000
90
157
FF7
18
28.5
10000
8200
10000
15000
90
196
FJ6
14
34.8
18000
90
236
FN6
12
41.2
22000
101
237
GN7
10
47.0
—
—
—
—
—
—
—
—
—
—
—
—
18000
Casing
symbol
ESR
Rated ripple
current
Rated
capacitance
( mΩ max. )
(mArms)
12000
15000
90
131
FD1
26
21.0
90
171
FH1
22
25.7
29.7
90
196
FJ6
18
101
175
GH5
18
29.3
90
236
FN6
14
35.9
101
195
GJ5
14
24.2
101
237
GN7
12
40.5
500V
Rated
capacitance
(µF)
1200
1500
Case(mm)
550V
Case(mm)
Casing
symbol
ESR
Rated ripple
current
( mΩ max. )
(mArms)
φD
L
(µF)
φD
L
51
115
CB5
215
6.2
1000
51
130
CD0
258
64
96
D96
215
6.3
1200
64
115
DB5
215
6.8
51
130
CD0
172
7.3
1500
64
130
DD0
172
8.0
5.9
64
96
D96
172
7.1
1800
77
115
EB5
143
8.7
1800
64
115
DB5
143
8.3
2200
77
130
ED0
117
10.1
2200
64
130
DD0
117
9.6
2700
77
155
EF5
96
12.0
2700
77
115
EB5
96
10.7
3300
77
155
EF5
78
13.3
3300
77
130
ED0
78
12.4
3900
90
157
FF7
66
15.5
3900
77
155
EF5
66
14.4
4700
90
171
FH1
55
17.6
77
171
EH1
55
16.5
5600
90
196
FJ6
46
20.3
90
131
FD1
55
15.8
6800
90
236
FN6
38
24.1
77
195
EJ5
46
19.0
8200
101
237
GN7
31
27.3
90
157
FF7
46
18.6
90
171
FH1
38
21.2
90
196
FJ6
31
24.5
101
175
GH5
31
24.2
90
236
FN6
26
29.3
4700
5600
6800
8200
10000
12000
101
195
GJ5
26
27.9
101
237
GN7
22
33.1
600V
Rated
capacitance
Case(mm)
Casing
symbol
ESR
Rated ripple
current
( mΩ max. )
(mArms)
(µF)
φD
L
1000
64
130
DD0
323
5.4
1200
77
115
EB5
269
6.1
1500
77
130
ED0
214
7.3
1800
77
155
EF5
179
8.9
2200
90
131
FD1
146
9.7
2700
90
157
FF7
120
11.6
3300
90
171
FH1
98
13.4
3900
90
196
FJ6
83
16.2
4700
90
196
FJ6
69
19.5
5600
101
220
FM0
58
22.5
(Note)Rated ripple current : 85℃ , 120Hz ; ESR. : 20℃ , 120Hz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
LY5
LY5
LARGE
CAPACITANCE
ALUMINUM
ELECTROLYTIC
CAPACITORS
LARGE
CAPACITANCE
ALUMINUM
ELECTROLYTIC
CAPACITORS
GREEN
CAP
Screw Terminal, Standard Capacitors
●
●
®
85˚C
2000hours
Screw Terminal, Standard capacitors.
Guarantees 2000 hours at 85°
C.
Large capacitance
LY5
LA5
Marking color : Silver print on a black sleeve
Specifications
Performance
Item
−40 to +85
10 to 250
Category temperature range (℃)
Rated voltage (V)
−25 to +85
350 to 630
(20℃,120Hz)
±20
Tolerance at rated capacitance (%)
Leakage current (µA)
(max.)
0.01CV or 5mA whichever is larger (after 5 minutes) C : Rated capacitance (µF) ; V : Rated voltage (V)
Tangent of loss angle
(20℃)
Refer to the following pages
(tanδ)
Endurance (85℃)
(Applied ripple current)
Shelf life (85℃)
(20℃,120Hz)
Test time
Leakage current
Percentage of capacitance change
Tangent of the loss angle
2000 hours
The initial specified value or less
Within ±20% of initial value
200% or less of the initial specified value
Test time
Leakage current
Percentage of capacitance change
Tangent of the loss angle
1000 hours
The initial specified value or less
Within ±20% of initial value
200% or less of the initial specified value
Voltage application treatment : According to JIS C5101-4 4.1
Applicable standards
JIS C5101 - 1,- 4 (IEC 60384 - 1,- 4)
Outline Drawing
Unit : mm
Sleeve
φD±1
−
Plate
L+3
Vent
F
M5
+
φD
F±1
8 max.
36
12.7
51
22.0
64
28.2
77
31.4
90
31.4
Mounting Clamp
101
41.5
Unit : mm
Code J(2ーlegs)
Code K(3ーlegs)
A
B
W1
A
W2
B
45
°
0°
12
R1
H
R2
φD
36
51
64
77
90
W1
48
68
81
93.5
108
W2
58
80
93
106
120.5
A
3.8
5
5
5
5
B
7
7
7
7
7
φD
51
64
77
90
101
R1
31.8
38.1
44.5
50.8
57.5
R2
36.5
42.6
49.2
55.6
63.5
A
5
5
5
5
6
B
7
7
7
7
8
φD
36
51∼101
H
15
30
Coefficient of Frequency for Rated Ripple Current
Frequency (Hz)
Part numbering system (example : 50V47000µF)
LY5
Series code
̶
50
Rated voltage
symbol
V
473
M
Rated capacitance
symbol
Capacitance
tolerance symbol
CB5
Casing
symbol
Rated voltage (V)
B
Optional
symbol
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
Clamp
code
10 to 50
63 to 160
200 to 500
600 to 630
50
120
300
1k
10k
0.95
0.95
0.80
0.80
1
1
1
1
1.04
1.06
1.10
1.10
1.10
1.16
1.25
1.30
1.15
1.30
1.50
1.40
CAT.No.2021/2022E
LY5
LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS
Standard Ratings
10V
Rated
capacitance
(µF)
33,000
39,000
47,000
56,000
68,000
82,000
100,000
120,000
150,000
180,000
220,000
270,000
330,000
390,000
470,000
560,000
680,000
820,000
—
—
—
tanδ
0.80
0.80
0.80
0.80
0.80
0.80
0.80
0.80
1.00
1.00
1.50
1.50
1.50
1.50
2.00
2.00
2.00
2.00
—
—
—
Case(mm)
φD
36
36
36
36
36
36
36
36
36
51
51
51
64
64
64
77
77
77
—
—
—
L
53
53
65
83
83
100
101
121
121
96
121
122
96
115
130
115
130
155
—
—
—
16V
Rated ripple
current
(mArms)
4.3
4.7
5.2
6.1
6.7
7.7
8.8
10.0
10.8
12.0
11.2
12.8
15.3
17.3
16.7
19.0
21.7
24.7
—
—
—
Rated
capacitance
(µF)
22,000
27,000
33,000
39,000
47,000
56,000
68,000
82,000
100,000
120,000
150,000
180,000
220,000
270,000
330,000
390,000
470,000
560,000
680,000
820,000
—
Rated ripple
Casing
current
symbol
(mArms)
A53
3.4
A53
3.7
A65
4.2
A83
4.7
A83
5.7
AA0
6.3
AA0
7.2
AC1
8.3
C96
8.7
C96
8.6
CB5
9.8
D96
11.6
DB5
13.3
DC1
14.8
DD0
14.9
EB5
17.0
ED0
20.0
EF5
20.3
FD1
23.5
FF7
26.4
FF7
29.6
—
—
Rated
capacitance
(µF)
5,600
6,800
8,200
10,000
12,000
15,000
18,000
22,000
27,000
33,000
39,000
47,000
56,000
68,000
82,000
100,000
120,000
150,000
180,000
220,000
270,000
—
Casing
symbol
A53
A53
A65
A83
A83
AA0
AA1
AC1
AC1
C96
CC1
CC2
D96
DB5
DD0
EB5
ED0
EF5
—
—
—
tanδ
0.60
0.60
0.60
0.60
0.60
0.60
0.60
0.80
0.80
0.80
1.00
1.00
1.00
1.00
1.50
1.50
1.50
1.50
1.50
2.00
—
Case(mm)
φD
36
36
36
36
36
36
36
36
36
36
51
51
51
64
64
64
77
77
77
90
—
35V
Rated
capacitance
(µF)
10,000
12,000
15,000
18,000
22,000
27,000
33,000
39,000
47,000
56,000
68,000
82,000
100,000
120,000
150,000
180,000
220,000
270,000
330,000
390,000
470,000
—
tanδ
0.40
0.40
0.40
0.40
0.40
0.40
0.40
0.50
0.50
0.60
0.60
0.60
0.60
0.80
0.80
0.80
0.80
1.00
1.00
1.00
1.00
—
Case(mm)
φD
36
36
36
36
36
36
36
36
51
51
51
64
64
64
64
77
77
77
90
90
90
—
L
53
53
65
83
83
100
100
121
96
96
115
96
115
121
130
115
130
155
131
157
157
—
tanδ
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.30
0.30
0.30
0.30
0.30
0.40
0.40
0.40
0.40
0.40
0.40
—
Case(mm)
φD
36
36
36
36
36
36
36
36
36
36
51
51
51
51
64
64
77
77
77
90
90
—
L
53
53
65
83
83
83
100
100
121
121
96
96
115
130
115
130
115
130
155
131
157
—
Rated
capacitance
(µF)
15,000
18,000
22,000
27,000
33,000
39,000
47,000
56,000
68,000
82,000
100,000
120,000
150,000
180,000
220,000
270,000
330,000
390,000
470,000
560,000
680,000
Rated ripple
Casing
current
symbol
(mArms)
A53
3.0
A53
3.3
A53
3.6
A65
4.0
A83
4.7
A83
5.5
AA0
6.2
AC1
6.3
AC1
7.1
C96
8.2
C96
8.1
CB5
9.3
D96
10.5
D96
12.0
DB5
13.7
EB5
14.7
EB5
16.7
ED0
19.3
EF5
21.9
FD1
21.4
FF7
24.6
—
—
Rated
capacitance
(µF)
3,900
4,700
5,600
6,800
8,200
10,000
12,000
15,000
18,000
22,000
27,000
33,000
39,000
47,000
56,000
68,000
82,000
100,000
120,000
150,000
180,000
220,000
A53
A53
A53
A65
A83
A83
AA0
AA0
AC1
AC1
C96
CB5
CD0
D96
DB5
DD0
EB5
ED0
EF5
FF7
—
tanδ
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.60
0.60
0.60
0.60
0.80
0.80
0.80
1.00
1.00
1.00
1.20
1.20
1.20
1.20
Case(mm)
φD
36
36
36
36
36
36
36
36
36
36
51
51
51
64
64
64
64
77
77
90
90
50V
tanδ
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.40
0.40
0.40
0.50
0.50
0.50
0.50
0.50
0.60
0.60
0.60
0.60
0.60
0.60
—
Case(mm)
φD
36
36
36
36
36
36
36
36
36
51
51
51
64
64
64
77
77
77
77
90
90
—
80V
Rated
capacitance
(µF)
3,300
3,900
4,700
5,600
6,800
8,200
10,000
12,000
15,000
18,000
22,000
27,000
33,000
39,000
47,000
56,000
68,000
82,000
100,000
120,000
150,000
—
L
53
53
53
65
83
83
100
100
121
121
96
115
130
96
115
130
115
130
155
157
—
25V
Rated ripple
current
(mArms)
4.1
4.5
5.0
5.9
6.4
7.3
8.4
8.3
9.5
10.9
11.3
12.8
15.3
17.6
16.8
18.3
21.3
23.6
27.6
27.1
—
Casing
symbol
L
53
53
53
65
83
83
100
121
121
96
96
115
96
96
115
115
115
130
155
131
157
—
L
53
53
53
65
83
83
100
100
121
121
96
115
130
96
115
130
155
115
155
131
157
Casing
symbol
A53
A53
A53
A65
A83
A83
AA0
AA0
AC1
AC1
C96
CB5
CD0
D96
DB5
DD0
DF5
EB5
EF5
FD1
FF7
Rated ripple
current
(mArms)
3.7
4.1
4.5
5.0
5.9
6.7
7.7
7.9
9.2
10.4
10.3
11.7
14.1
15.7
16.1
18.6
21.9
22.0
25.6
27.9
32.5
63V
tanδ
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.30
0.30
0.30
0.40
0.40
0.40
0.40
0.40
0.50
0.50
0.50
0.50
0.50
0.60
0.60
Case(mm)
φD
36
36
36
36
36
36
36
36
36
36
51
51
51
51
64
64
64
77
77
77
90
90
L
53
53
53
65
83
83
100
100
121
121
96
96
115
130
115
121
130
115
130
155
131
157
Casing
symbol
A53
A53
A53
A65
A83
A83
AA0
AA0
AC1
AC1
C96
C96
CB5
CD0
DB5
DC1
DD0
EB5
ED0
EF5
FD1
FF7
Rated ripple
current
(mArms)
2.7
3.0
3.3
3.6
4.3
4.9
5.6
5.9
6.7
7.8
7.4
8.4
9.5
11.3
12.8
12.7
14.5
16.7
18.9
22.4
22.4
26.2
100V
Rated ripple
Rated
Casing
current
capacitance
symbol
(mArms) (µF)
A53
2.5
1,800
A53
2.8
2,200
A65
3.0
2,700
A83
3.6
3,300
A83
3.9
3,900
A83
4.5
4,700
AA0
5.2
5,600
AA0
5.9
6,800
AC1
6.8
8,200
AC1
7.8
10,000
C96
8.0
12,000
C96
9.2
15,000
CB5
10.5
18,000
CD0
12.0
22,000
DB5
13.6
27,000
DD0
13.4
33,000
EB5
15.4
39,000
ED0
17.5
47,000
EF5
20.5
56,000
FD1
22.4
68,000
FF7
26.5
82,000
—
—
100,000
tanδ
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.35
0.35
0.35
0.35
0.35
Case(mm)
φD
36
36
36
36
36
36
36
36
36
36
51
51
51
51
64
64
77
77
77
90
90
90
L
53
53
53
65
83
83
100
100
121
121
75
96
115
130
115
130
115
130
155
131
157
171
Casing
symbol
A53
A53
A53
A65
A83
A83
AA0
AA0
AC1
AC1
C75
C96
CB5
CD0
DB5
DD0
EB5
ED0
EF5
FD1
FF7
FH1
Rated ripple
current
(mArms)
1.9
2.1
2.3
2.6
3.0
3.5
3.9
4.5
5.1
5.9
6.4
7.0
8.3
10.0
11.5
11.9
13.4
14.2
16.0
18.8
20.5
24.0
(Note)Rated ripple current : 85℃ , 120Hz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
LY5
LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS
Standard Ratings
160V
Rated
capacitance
(µF)
3,300
4,700
5,600
6,800
10,000
12,000
15,000
18,000
22,000
33,000
39,000
tanδ
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
Case(mm)
φD
36
51
51
51
64
51
64
64
77
90
90
L
121
75
96
96
96
120
130
130
130
131
157
200V
Casing
symbol
AC1
C75
C96
C96
D96
CC0
DD0
DD0
ED0
FD1
FF7
Rated ripple
Rated
current
capacitance
(mArms) (µF)
5.2
2,200
5.9
3,300
7.0
4,700
7.8
5,600
10.4
6,800
11.3
8,200
14.3
10,000
15.6
15,000
18.3
18,000
23.8
22,000
27.9
33,000
tanδ
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
Case(mm)
φD
36
51
51
51
51
64
64
77
77
77
90
350V
Rated
capacitance
(µF)
470
680
1,000
1,500
1,800
2,200
2,700
3,300
3,900
4,700
5,600
6,800
8,200
10,000
12,000
15,000
18,000
tanδ
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
Case(mm)
φD
36
36
36
51
51
51
51
51
64
64
77
77
77
90
90
90
90
L
83
83
100
75
96
96
130
130
115
130
115
130
155
157
157
196
236
tanδ
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
Case(mm)
φD
51
64
64
77
77
77
77
90
90
77
90
L
115
96
130
115
130
130
155
157
171
220
236
AA0
C75
C96
CB5
CD0
D96
D96
E96
ED0
EF0
FF7
Rated ripple
Rated
current
capacitance
(mArms) (µF)
3.9
1,500
4.9
2,200
6.4
3,300
7.6
4,700
8.8
6,800
9.4
8,200
10.4
10,000
14.4
15,000
16.5
18,000
19.6
22,000
25.3
—
tanδ
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
—
Case(mm)
φD
36
51
51
64
64
64
64
77
77
90
—
400V
Casing
symbol
A83
A83
AA0
C75
C96
C96
CD0
CD0
DB5
DD0
EB5
ED0
EF5
FF7
FF7
FJ6
FN6
Rated ripple
Rated
current
capacitance
(mArms) (µF)
2.2
470
2.6
680
3.4
1,000
4.3
1,200
5.1
1,500
5.7
1,800
7.1
2,200
7.9
2,700
9.0
3,300
10.3
3,900
11.4
4,700
13.1
5,600
15.4
6,800
18.1
8,200
20.0
10,000
24.5
12,000
28.8
15,000
tanδ
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
Case(mm)
φD
36
36
51
51
51
51
51
64
64
64
77
77
77
90
90
90
90
500V
Rated
capacitance
(µF)
1,000
1,500
2,200
2,700
3,300
3,900
4,700
5,600
6,800
8,200
10,000
L
100
75
96
115
130
96
96
96
130
150
157
250V
Casing
symbol
L
83
100
75
75
96
96
120
96
115
130
115
130
155
157
157
196
236
CB5
D96
DD0
EB5
ED0
ED0
EF5
FF7
FH1
EM0
FN6
Rated ripple
Rated
current
capacitance
(mArms) (µF)
1,200
4.6
5.7
1,500
6.9
1,800
8.1
2,200
9.6
2,700
10.8
3,300
12.1
3,300
13.8
3,900
15.8
4,700
5,600
17.2
22.1
tanδ
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
Case(mm)
φD
64
64
77
77
77
77
90
90
90
90
L
96
115
96
115
130
155
131
131
157
196
Casing
symbol
AA0
C75
C96
D96
DB5
DB5
DD0
ED0
EF5
FF7
—
Rated ripple
current
(mArms)
3.2
4.0
5.4
7.1
9.1
10.0
11.7
15.1
17.7
20.9
—
450V
Casing
symbol
A83
AA0
C75
C75
C96
C96
CC0
D96
DB5
DD0
EB5
ED0
EF5
FF7
FF7
FJ6
FN6
Rated ripple
Rated
current
capacitance
(mArms) (µF)
2.2
470
2.8
680
3.5
820
3.8
1,000
4.7
1,200
5.2
1,500
6.4
1,800
7.0
2,200
8.2
2,700
9.4
3,300
10.4
3,900
11.9
4,700
14.1
5,600
16.4
6,800
18.3
8,200
21.8
10,000
26.3
12,000
tanδ
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
Case(mm)
φD
36
36
51
51
51
51
51
64
64
64
77
77
77
90
90
90
90
600V
Casing
symbol
L
100
75
96
96
115
115
130
130
155
157
—
L
83
100
75
75
96
115
130
96
115
130
115
130
155
157
157
196
236
Casing
symbol
A83
AA0
C75
C75
C96
CB5
CD0
D96
DB5
DD0
EB5
ED0
EF5
FF7
FF7
FJ6
FN6
Rated ripple
current
(mArms)
2.2
2.8
3.2
3.5
4.2
5.0
5.9
6.3
7.5
8.7
9.5
10.9
12.8
15.0
16.5
20.0
23.6
630V
Casing
symbol
D96
DB5
E96
EB5
ED0
EF5
FD1
FD1
FF7
FJ6
Rated ripple
Rated
current
capacitance
(mArms) (µF)
1,000
7.7
9.3
1,200
10.1
1,500
12.0
1,800
14.0
2,200
16.4
2,700
16.4
3,300
17.8
3,900
21.0
4,700
24.5
5,600
tanδ
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
Case(mm)
φD
64
77
77
77
90
90
90
90
90
101
L
130
115
130
155
131
157
171
196
196
220
Casing
symbol
DD0
EB5
ED0
EF5
FD1
FF7
FH1
FJ6
FJ6
FM0
Rated ripple
current
(mArms)
6.0
6.7
8.1
9.8
10.7
12.8
14.7
17.9
21.6
24.9
(Note)Rated ripple current : 85℃ , 120Hz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
ALUMINUM ELECTROLYTIC CAPACITORS FOR AUDIO
AAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
Aluminum Electrolytic Capacitors for Audio
CAT.No.2021/2022
RVO
RVO
VERTICAL
CHIPCHIP
TYPETYPE
VERTICAL
ALUMINUM
ELECTROLYTIC
CAPACITORS
FOR AUDIO
ALUMINUM
ELECTROLYTIC
CAPACITORS
FOR AUDIO
Chip Type Audio Use Capacitors
●
●
GREEN
CAP
SMD
®
For
Audio
Audio grade surface mount product with completely new
components using synthetic mica paper for the separator.
Both quality sense and sound field that could not be realized
by the surface mount products are reproducible.
For higher grade
RVO
Marking color : Black print (φ4 to φ10)
RVO
(PURECAP)
Specifications
Item
Performance
ー40 to +85
±20
Category temperature range (℃)
Tolerance at rated capacitance (%)
Leakage current (µA)
(max.)
(20℃,120Hz)
0.01CV or 3 whichever is larger (after 2 minutes) C : Rated capacitance (µF) ; V: Rated voltage (V)
Rated voltage (V)
tanδ (max.)
Tangent of loss angle
(tanδ)
6.3
0.28
10
0.24
16
0.20
25
0.14
(20℃)
35
0.12
50
0.10
(20℃,120Hz)
Rated voltage (V)
Z−25℃/Z+20℃
Z−40℃/Z+20℃
Characteristics at high
and low temperature
6.3
3
8
Impedance ratio (max.)
10
3
5
16
2
4
25
2
3
35
2
3
50
2
3
(120Hz)
Test time
Leakage current
Percentage of capacitance change
Tangent of the loss angle
Endurance (85℃)
(Applied ripple current)
2000 hours
The initial specified value or less
Within ±20% of initial value
200% or less of the initial specified value
Shelf life (85℃)
Test time : 1000hours ; other items are same as the endurance. Voltage application treatment : According to JIS C5101-4 4.1
Applicable standards
JIS C5101 - 1,- 18 (IEC 60384 - 1,- 18)
Outline Drawing
Unit : mm
6.3 to 16
25 to 35
50
(C)
(P)
B±0.2
φD±0.5
L
5.3±0.2
5.3±0.2
5.3±0.2
6.5±0.3
10±0.5
10±0.5
A
4.3
5.3
6.3
8.4
8.4
10.4
B
4.3
5.3
6.3
8.4
8.4
10.4
C
2.0
2.3
2.7
3.4
3.0
3.3
0.5
0.5
0.5
0.5
0.7
0.7
W
to 0.8
to 0.8
to 0.8
to 0.8
to 1.1
to 1.1
P
1.0
1.5
2.0
2.3
3.1
4.7
Casing symbol
D55
E55
F55
G68
G10
H10
Refer to individual page.
(Soldering conditions, Land pattern size, The taping specifications)
Standard Ratings
Rated voltage (V)
Item
Rated
capacitance (µF)
0.33
0.47
1
2.2
3.3
4.7
10
22
33
47
100
220
330
470
1000
1k
10k・100k
1
1
1
1.15
1.25
1.35
1.25
1.40
1.50
φ4 to φ6.3, φ8×6.5 (example : 16V47µF)
RVO
( ) : Reference size
φD
4
5
6.3
8
8
10
120
Part numbering system
W
L
50
0.80
0.80
0.80
Rated voltage (V)
(C)
A±0.2
Frequency (Hz)
0.4±0.2
0.3 max.
Inner vent (φ10 only)
Coefficient of Frequency for Rated Ripple Current
̶
16
V
Rated voltage
symbol
Series code
470
M
Rated capacitance Capacitance
symbol
tolerance symbol
F55
P2 U ̶
Casing
symbol
Taping
symbol
φ8×10 (example : 16V330µF) *
RVO
̶
16
V
Rated voltage
symbol
Series code
331
M
Rated capacitance Capacitance
symbol
tolerance symbol
G10
Y1 U ̶
Casing
symbol
Taping
symbol
φ10×10 (example : 16V470µF) *
RVO
Series code
̶
16
Rated voltage
symbol
V
471
M
Rated capacitance Capacitance
symbol
tolerance symbol
H10
Casing
symbol
E U̶
Taping
symbol
*φ8x10L, φ10x10L product have sleeve type (white print on a brown sleeve), but old type product.
Please inquire for sleeve type P/N. However, we don't accept new orders.
50
6.3
10
16
25
35
Rated ripple current
Rated ripple current
Rated ripple current
Rated ripple current
Rated ripple current
Rated ripple current
Case
Case
Case
Case
Case
Case
(mArms)
(mArms)
(mArms)
(mArms)
(mArms)
(mArms)
φD×L (mm)
φD×L (mm)
φD×L (mm)
φD×L (mm)
φD×L (mm)
φD×L (mm)
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
4×5.3
6
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
4×5.3
7
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
4×5.3
10
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
4×5.3
15
̶
̶
̶
̶
̶
̶
̶
̶
4×5.3
17
4×5.3
19
̶
̶
̶
̶
4×5.3
18
4×5.3
19
4×5.3
20
5×5.3
26
̶
̶
4×5.3
23
4×5.3
26
5×5.3
32
5×5.3
34
6.3×5.3
44
4×5.3
31
5×5.3
40
5×5.3
44
6.3×5.3
55
6.3×5.3
59
8×6.5
124
5×5.3
44
5×5.3
49
6.3×5.3
63
6.3×5.3
67
8×6.5
124
8×6.5
124
200
5×5.3
53
6.3×5.3
68
6.3×5.3
76
8×6.5
124
8×6.5
124
8×10
366
6.3×5.3
90
6.3×5.3
99
8×6.5
124
8×6.5
137
8×10
200
10×10
̶
̶
8×6.5
149
8×6.5
149
8×10
200
8×10
235
10×10
366
̶
̶
̶
̶
8×6.5
160
8×10
226
8×10
245
10×10
366
̶
̶
̶
̶
̶
̶
8×10
251
10×10
366
10×10
366
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
10×10
423
(Note) Rated ripple current : 85℃, 120Hz.
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
RVF
VERTICAL CHIP TYPE
VERTICAL CHIP TYPE
ALUMINUM
ELECTROLYTIC
ALUMINUM ELECTROLYTIC
CAPACITORS
FOR AUDIO CAPACITORS FOR AUDIO
®
GREEN
CAP
Chip Type,For Audio,High Grade(SILMIC) Capacitors
●
●
●
Silk fiber paper products used surface mount device.
Completely new audio products for the high-grade
paper using silk fiber paper.
Silk“flexibility”to reduce the vibration energy of the
music, in the sense of high-frequency peak,
a significant decrease in roughness of the midrange
and bass increase.
For
Audio
SMD
SILMIC SMD
RVF
ROS
Marking color : Black print
Specifications
Item
Tolerance at rated capacitance (%)
Performance
ー40 to +85
±20
Leakage current (µA)
(max.)
0.01CV or 3 whichever is larger (after 2 minutes)
C : Rated capacitance (µF) , V : Rated voltage (V)
Category temperature range (℃)
Rated voltage (V)
tanδ (max.)
Tangent of loss angle
(tanδ)
RVF
(20℃,120Hz)
(20℃)
10
0.32
16
0.26
50
0.12
10
3
8
16
2
4
50
2
4
(20℃,120Hz)
Rated voltage (V)
Z−25℃/Z+20℃
Impedance ratio (max.)
Z−40℃/Z+20℃
Characteristics at high and
low temperature
(120Hz)
Test time
Leakage current
Percentage of capacitance change
Tangent of the loss angle
Endurance (85℃)
2000 hours
The initial specified value or less
Within ±20% of initial value
200% or less of the initial specified value
Shelf life (85℃)
Test time : 500hours ; other items are same as the endurance. Voltage application treatment : According to JIS C5101-4 4.1
Applicable standards
JIS C5101 - 1,- 18 (IEC 60384 - 1,- 18)
Outline Drawing
Unit : mm
Frequency (Hz)
Rated voltage (V)
10 to 16
50
50
120
1k
10k . 100k
0.80
0.80
1
1
1.15
1.35
1.25
1.50
Part numbering system (example : 16V10µF)
(C)
(P)
B±0.2
φD±0.5
(C)
A±0.2
0.4±0.2
0.3 max.
Coefficient of Frequency for Rated Ripple Current
L
RVF
Series code
W
̶
16
Rated voltage
symbol
V
100
M
Rated
capacitance
symbol
Capacitance
tolerance symbol
E55 U ̶
Casing
symbol
Taping
symbol
( ) : Reference size
φD
4
5
6.3
8
L
5.3±0.2
5.3±0.2
5.3±0.2
10±0.5
A
4.3
5.3
6.6
8.4
B
4.3
5.3
6.6
8.4
C
2.0
2.3
2.7
3.0
0.5
0.5
0.5
0.7
W
to 0.8
to 0.8
to 0.8
to 1.1
P
1.0
1.5
2.0
3.1
Casing symbol
D55
E55
F55
G10
Refer to individual page.
(Soldering conditions, Land pattern size, The taping specifications)
Standard Ratings
Rated voltage (V)
Rated
capacitance (µF)
1
2.2
3.3
4.7
10
22
33
47
100
Item
10
16
50
Rated ripple current
Rated ripple current
Rated ripple current
Case
Case
Case
φD×L(mm) (mArms) φD×L(mm) (mArms) φD×L(mm) (mArms)
̶
̶
̶
̶
7
4×5.3
̶
̶
̶
̶
5×5.3
11
̶
̶
̶
̶
16
6.3×5.3
̶
̶
6.3×5.3
4×5.3
10
19
15
41
5×5.3
5×5.3
16
8×10
̶
̶
6.3×5.3
6.3×5.3
25
28
̶
̶
6.3×5.3
31
8×10
50
̶
̶
8×10
54
60
8×10
8×10
8×10
87
̶
̶
79
(Note) Rated ripple current : 85℃, 120Hz.
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
RVM
RVM
VERTICAL
CHIPCHIP
TYPETYPE
VERTICAL
ALUMINUM
ELECTROLYTIC
CAPACITORS
FOR AUDIO
ALUMINUM
ELECTROLYTIC
CAPACITORS
FOR AUDIO
GREEN
CAP
Chip Type,For Audio,High Grade Capacitors
●
●
●
SMD
®
For
105℃
105˚C
2000hoursAudio
2000hours
New developed AI-Foil and Electrolyte for Audio grade
allow lower distortion.
New range of bright and smooth
sound is achieved in SMD area.
High temperature, Long life
Guarantees 2000 hours 105℃.
RVM
RVG
Marking color : Black print
Specifications
Item
Tolerance at rated capacitance (%)
Performance
ー55 to +105
±20
Leakage current (µA)
(max.)
0.01CV or 3 whichever is larger (after 2 minutes)
C : Rated capacitance (µF), V: Rated voltage (V)
Category temperature range (℃)
Rated voltage (V)
tanδ (max.)
Tangent of loss angle
(tanδ)
(20℃,120Hz)
(20℃)
6.3
0.28
10
0.24
16
0.20
25
0.16
35
0.13
50
0.12
6.3
2
8
10
2
4
16
2
4
25
2
3
35
2
3
50
2
3
(20℃,120Hz)
Rated voltage (V)
Z−25℃/Z+20℃
Impedance ratio (max.)
Z−55℃/Z+20℃
Characteristics at high and
low temperature
(120Hz)
Test time
Leakage current
Percentage of capacitance change
Tangent of the loss angle
Endurance (105℃)
2000 hours
The initial specified value or less
Within ±30% of initial value
300% or less of the initial specified value
Shelf life (105℃)
Test time : 1000hours ; other items are same as the endurance. Voltage application treatment : According to JIS C5101-4 4.1
Applicable standards
JIS C5101 - 1,- 18 (IEC 60384 - 1,- 18)
Outline Drawing
Unit : mm
0.3 max.
Frequency (Hz)
Rated voltage (V)
(C)
W
L
L
5.8±0.3
5.8±0.3
5.8±0.3
6.5±0.3
10.5±0.5
10.5±0.5
A
4.3
5.3
6.6
8.4
8.4
10.4
B
4.3
5.3
6.6
8.4
8.4
10.4
C
2.0
2.3
2.7
3.4
3.0
3.3
0.5
0.5
0.5
0.5
0.7
0.7
W
to 0.8
to 0.8
to 0.8
to 0.8
to 1.1
to 1.1
6.3 to 16
25 to 35
1 to 3.3μF
4.7μF or more
P Casing symbol
1.0
D61
1.5
E61
2.0
F61
2.3
G68
3.1
GA5
4.7
HA5
50
120
1k
10k・100k
0.80
0.80
0.50
0.70
1
1
1
1
1.15
1.25
1.35
1.35
1.25
1.40
1.50
1.50
Part numbering system (example : 6.3V220µF)
RVM
( ) : Reference size
φD
4
5
6.3
8
8
10
50
(P)
B±0.2
φD±0.5
(C)
A±0.2
0.4±0.2
Inner vent (φ10 only)
Coefficient of Frequency for Rated Ripple Current
Series code
̶
6
Rated voltage
symbol
V
221
M
GA5
Rated
capacitance
symbol
Capacitance
tolerance symbol
Casing
symbol
P U̶
R2
Taping
symbol
Refer to individual page.
(Soldering conditions, Land pattern size, The taping specifications)
Standard Ratings
Rated voltage (V)
Item
Rated
capacitance (µF)
1
2.2
3.3
4.7
10
22
33
47
100
220
330
470
6.3
10
16
25
35
50
Case
Case
Case
Case
Case
Case
Rated ripple current
Rated ripple current
Rated ripple current
Rated ripple current
Rated ripple current
Rated ripple current
φD×L (mm)
φD×L (mm)
φD×L (mm)
(mArms)
φD×L (mm)
φD×L (mm)
φD×L (mm)
(mArms)
(mArms)
(mArms)
(mArms)
(mArms)
ー
ー
ー
ー
ー
ー
ー
ー
ー
ー
4×5.8
7
ー
ー
ー
ー
ー
ー
ー
ー
ー
ー
4×5.8
10
ー
ー
ー
ー
ー
ー
ー
ー
ー
ー
4×5.8
12
ー
ー
ー
ー
4×5.8
11
4×5.8
13
4×5.8
14
5×5.8
17
ー
ー
4×5.8
15
4×5.8
17
5×5.8
21
5×5.8
24
6.3×5.8
29
4×5.8
21
5×5.8
26
5×5.8
28
6.3×5.8
37
6.3×5.8
41
8×6.5
52
5×5.8
29
5×5.8
32
6.3×5.8
41
6.3×5.8
45
8×6.5
62
8×10.5
75
5×5.8
35
6.3×5.8
44
6.3×5.8
48
8×6.5
66
8×10.5
86
8×10.5
90
8×6.5
86
6.3×5.8
60
8×6.5
79
8×10.5
113
10×10.5
145
10×10.5
151
8×10.5
101
8×10.5
150
8×10.5
127
8×10.5
137
10×10.5
194
10×10.5
216
ー
ー
10×10.5
174
8×10.5
156
10×10.5
194
10×10.5
213
ー
ー
ー
ー
ー
ー
10×10.5
215
10×10.5
232
10×10.5
254
ー
ー
ー
ー
ー
ー
(Note) Rated ripple current : 105℃, 120Hz.
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
RVG
RVG
VERTICAL
CHIP
TYPE
VERTICAL
CHIP
TYPE
ALUMINUM
ELECTROLYTIC
CAPACITORS
FOR AUDIO
ALUMINUM ELECTROLYTIC
CAPACITORS
FOR AUDIO
Chip Type Audio Use Capacitors
●
●
GREEN
CAP
®
For
Audio
SMD
New developed AI-Foil and Electrolyte for Audio grade allow lower
distortion.
New range of bright and smooth sound is achieved in SMD area.
Marking color : Black print
Specifications
Item
Performance
ー40 to +85
±20
Category temperature range (℃)
Tolerance at rated capacitance (%)
Leakage current (µA)
(max.)
(20℃,120Hz)
0.01CV or 3 whichever is larger (after 2 minutes) C : Rated capacitance (µF) ; V : Rated voltage (V)
6.3
0.28
Rated voltage (V)
tanδ (max.)
Tangent of loss angle
(tanδ)
10
0.24
16
0.20
(20℃)
25
0.16
35
0.14
(20℃,120Hz)
6.3
4
8
Rated voltage (V)
Z−25℃/Z+20℃
Z−40℃/Z+20℃
Characteristics at high
and low temperature
Impedance ratio (max.)
10
3
5
16
2
4
25
2
3
35
2
3
(120Hz)
Test time
Leakage current
Percentage of capacitance change
Tangent of the loss angle
Endurance (85℃)
(Applied ripple current)
2000 hours
The initial specified value or less
Within ±20% of initial value
200% or less of the initial specified value
Shelf life (85℃)
Test time : 500hours ; other items are same as the endurance. Voltage application treatment : According to JIS C5101-4 4.1
Applicable standards
JIS C5101 - 1,- 18 (IEC 60384 - 1,- 18)
Outline Drawing
Unit : mm
Frequency (Hz)
Rated voltage (V)
6.3 to 16
25 to 35
50
120
1k
10k・100k
0.80
0.80
1
1
1.15
1.25
1.25
1.40
(P)
Part numbering system (example : 16V47 µF)
RVG
(C)
φD±0.5
B±0.2
(C)
A±0.2
0.4±0.2
0.3 max.
Inner vent (φ10 only)
Coefficient of Frequency for Rated Ripple Current
W
L
L
5.3±0.2
5.3±0.2
5.3±0.2
6.5±0.3
10±0.5
10±0.5
A
4.3
5.3
6.3
8.4
8.4
10.4
B
4.3
5.3
6.3
8.4
8.4
10.4
C
2.0
2.3
2.7
3.4
3.0
3.3
0.5
0.5
0.5
0.5
0.7
0.7
W
to 0.8
to 0.8
to 0.8
to 0.8
to 1.1
to 1.1
P
1.0
1.5
2.0
2.3
3.1
4.7
V
Rated voltage
symbol
( ) : Reference size
φD
4
5
6.3
8
8
10
16
—
Series code
470
M
Rated capacitance
symbol
Capacitance
tolerance symbol
F55 U —
Casing
symbol
Taping
symbol
Casing symbol
D55
E55
F55
G68
G10
H10
Refer to individual page.
(Soldering conditions, Land pattern size, The taping specifications)
Standard Ratings
Rated voltage (V)
Item
6.3
10
16
25
35
Case
Rated ripple current
Case
Rated ripple current
Case
Rated ripple current
Case
Rated ripple current
Case
Rated ripple current
φD×L (mm)
(mArms)
φD×L (mm)
(mArms)
φD×L (mm)
(mArms)
φD×L (mm)
(mArms)
φD×L (mm)
(mArms)
3.3
̶
̶
̶
̶
̶
̶
̶
̶
4×5.3
11
4.7
̶
̶
̶
̶
4×5.3
11
4×5.3
12
4×5.3
13
̶
̶
̶
̶
5×5.3
19
5×5.3
21
5×5.3
22
̶
̶
5×5.3
28
6.3×5.3
36
6.3×5.3
39
60
Rated
capacitance (µF)
10
22
4×5.3
20
33
5×5.3
29
5×5.3
31
6.3×5.3
40
6.3×5.3
44
8×6.5
47
5×5.3
34
6.3×5.3
43
6.3×5.3
47
8×6.5
66
8×10
82
100
6.3×5.3
58
8×6.5
79
8×6.5
87
8×10
112
10×10
139
220
8×6.5
107
8×10
136
8×10
149
10×10
192
̶
̶
330
8×10
153
8×10
166
10×10
221
̶
̶
̶
̶
470
8×10
183
10×10
229
̶
̶
̶
̶
̶
̶
(Note) Rated ripple current : 85℃, 120Hz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
RFS
MINIATURE ALUMINUM
CAPACITORS
FOR AUDIO FOR AUDIO
MINIATURE ELECTROLYTIC
ALUMINUM ELECTROLYTIC
CAPACITORS
®
RFS
SILMIC series Silk fiber using audio purpose capacitor
ELNA developed new raw material for the separate paper which use a silk fibers.
Therefore, this capacitor can give you high grade sound for your audio design.
Due to the silk fiber's pliability, the capacitor makes a dream of the high quality
sound.
For examples ;
To relieve the music's vibration energy.
To decrease the peak feeling sound at high compass and rough quality sound at
middle compass.
To increase massive sound at low compass.
For bipolar capacitors, consult with us.
●
●
●
●
Marking color : White print on a brown sleeve
●
●
Miniature High Grade Capacitors for Audio(SILMICⅠ
Ⅰ)
●
●
GREEN
CAP
All lead wires oxygen-free copper for extremely low distortion.
(Third high frequency distortion 10kHz,0.1A,-120dB or less)
"SILMIC II" mark on sleeve.
For
Audio
For higher grade
RFS
For higher grade
ROS
For higher grade
ROA
ROB
Specifications
Item
Performance
ー40 to +85
±20
Category temperature range (℃)
Tolerance at rated capacitance (%)
Leakage current (µA)
(max.)
Rated voltage (V)
tanδ (max.)
Tangent of loss angle
(tanδ)
6.3
0.20
10
0.17
16
0.13
25
0.10
35
0.10
(20℃)
50
0.08
63
0.08
100
0.08
0.02 is added to every 1000µF increase over 1000µF
(20℃,120Hz)
Test time
Leakage current
Percentage of capacitance change
Tangent of the loss angle
Endurance (85℃)
(Applied ripple current)
1000 hours
The initial specified value or less
Within ±20% of initial value
150% or less of the initial specified value
Test time : 1000hours ; other items are same as the endurance. Voltage application treatment : According to JIS C5101-4 4.1
JIS C5101 - 1,- 4 (IEC 60384 - 1,- 4)
Shelf life (85℃)
Applicable standards
Outline Drawing
Unit : mm
Vent (except φ5)
Sleeve
φd±0.05 copper wire (tinned)
Coefficient of Frequency for Rated Ripple Current
Rated voltage (V)
15min.
L+α max.
5
2.0
0.6
6.3
2.5
0.6
8
3.5
0.6
10
5.0
0.6
12.5
5.0
0.6
16
7.5
0.8
50・60
120
1k
10k
100k
0.8
0.8
0.8
0.8
0.8
1
1
1
1
1
1.1
1.5
1.2
1.6
1.2
1.2
1.7
1.3
1.9
1.3
1.2
1.7
1.3
1.9
1.3
Part numbering system (example : 25V100µF)
18
7.5
0.8
RFS
2.0
(φ10,16L or less : 1.5)
1.5
α
50 to 100
5
min.
Frequency (Hz)
CV (µF×WV)
All CV value
≤1000
1000<
≤1000
1000<
25 to 35
F±0.5
φD+0.5/0
6.3 to 16
φD
F
φd
(20℃,120Hz)
0.01CV or 3 whichever is larger (after 5 minutes) C : Rated capacitance (µF) ; V : Rated voltage (V)
̶
Series code
25
V
Rated voltage
symbol
101
M
Rated capacitance Capacitance
symbol
tolerance symbol
H4 #5 ̶
Taping (Forming)
symbol
Casing
symbol
Case symbol
Casing
Casing
Casing
Casing
Case
Case
Case
Case
φD×L (mm) Symbol φD×L (mm) Symbol φD×L (mm) Symbol φD×L (mm) Symbol
5×11
E3
10×12.5
H3
16×31.5
J7
12.5×20
Ⅰ5
6.3×11
F3
10×16
H4
16×35.5
J8
12.5×25
Ⅰ6
8×11.5
G3
10×20
H5
18×35.5
K8
16×25
J6
18×40
K9
Standard Ratings
Rated voltage (V)
Rated
capacitance (µF)
Item
Case
6.3
φD×L (mm)
10
16
25
35
50
63
100
Rated ripple
Rated ripple
Rated ripple
Rated ripple
Rated ripple
Rated ripple
Rated ripple
Rated ripple
Case
Case
Case
Case
Case
Case
Case
current
current
current
current
current
current
current
current
(mArms) φD×L (mm) (mArms) φD×L (mm) (mArms) φD×L (mm) (mArms) φD×L (mm) (mArms) φD×L (mm) (mArms) φD×L (mm) (mArms) φD×L (mm) (mArms)
3.3
̶
̶
̶
̶
̶
̶
4.7
̶
̶
̶
̶
̶
̶
10
̶
̶
̶
̶
22
̶
̶
33
47
100
220
330
470
1000
2200
3300
5×11
5×11
6.3×11
8×11.5
10×12.5
10×16
10×20
12.5×20
̶
̶
55
65
80
135
240
290
390
710
̶
̶
5×11
5×11
6.3×11
5×11
6.3×11
8×11.5
10×16
10×20
12.5×20
16×25
16×35.5
18×40
50
65
70
75
85
145
260
350
455
835
1500
1980
5×11
35
5×11
6.3×11
5×11
6.3×11
55
70
70
90
̶
̶
̶
̶
5×11
25
5×11
30
5×11
6.3×11
5×11
6.3×11
35
60
60
80
5×11
6.3×11
35
55
8×11.5
95
8×11.5
120
10×12.5
140
5×11
6.3×11
5×11
6.3×11
8×11.5
25
30
35
40
75
5×11
30
̶
̶
5×11
6.3×11
35
40
̶
̶
75
̶
̶
8×11.5
10×12.5
130
10×16
140
̶
̶
10×16
175
10×20
190
12.5×20
220
8×11.5
125
8×11.5
140
10×12.5
170
10×16
210
10×20
225
12.5×25
285
10×12.5
10×20
12.5×20
12.5×25
16×31.5
18×40
̶
215
385
545
710
1315
2150
̶
10×16
12.5×20
12.5×25
16×25
16×35.5
̶
̶
270
505
675
940
1575
̶
̶
10×20
12.5×25
16×25
16×31.5
18×35.5
̶
̶
295
550
785
1030
1690
̶
̶
12.5×20
16×25
16×31.5
16×35.5
18×40
̶
̶
380
720
965
1210
1985
̶
̶
12.5×25
16×31.5
16×35.5
18×35.5
̶
̶
̶
415
785
1010
1295
̶
̶
̶
16×25
18×40
̶
̶
̶
̶
̶
485
930
̶
̶
̶
̶
̶
(Note) Rated ripple current : 85℃, 120Hz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
ROS
ROS
MINIATURE
ALUMINUM
ELECTROLYTIC
CAPACITORS
FOR
AUDIO
MINIATURE
ALUMINUM
ELECTROLYTIC
CAPACITORS
FOR
AUDIO
®
SILMIC series Silk fiber using audio purpose capacitor
High Grade Capacitors for Audio(SILMIC)
●
●
For
Audio
GREEN
CAP
All lead wires oxygen-free copper for extremely low distortion. (Third high
frequency distortion 10kHz,0.1A,-120dB or less)
"SILMIC" mark on sleeve.
For higher grade
ROS
Marking color : White print on a brown sleeve
For higher grade
ROA
ROB
Specifications
Performance
ー40 to +85
±20
Item
Category temperature range (℃)
Tolerance at rated capacitance (%)
Leakage current (µA)
(max.)
16
0.13
Rated voltage (V)
tanδ (max.)
25
0.10
35
0.10
63
0.08
100
0.08
(20℃,120Hz)
Test time
Leakage current
Percentage of capacitance change
Tangent of the loss angle
Shelf life (85℃)
Applicable standards
1000 hours
The initial specified value or less
Within ±20% of initial value
150% or less of the initial specified value
Test time : 1000hours ; other items are same as the endurance. Voltage application treatment : According to JIS C5101-4 4.1
JIS C5101 - 1,- 4 (IEC 60384 - 1,- 4)
Outline Drawing
Unit : mm
Sleeve
φd±0.05 copper wire (tinned)
Coefficient of Frequency for Rated Ripple Current
Rated voltage (V)
16
F±0.5
φD+0.5/0
15min.
L+α max.
6.3
2.5
0.6
8
3.5
0.6
1.5
10
5.0
0.6
50 to 100
5
min.
12.5
5.0
0.8
Frequency (Hz)
CV(µF×WV)
50・60
120
1k
10k
100k
0.8
0.8
0.8
0.8
0.8
1
1
1
1
1
1.1
1.5
1.2
1.6
1.2
1.2
1.7
1.3
1.9
1.3
1.2
1.7
1.3
1.9
1.3
All CV value
≤1000
1000<
≤1000
1000<
25 to 35
α
50
0.08
0.02 is added to every 1000µF increase over 1000µF
Endurance (85℃)
(Applied ripple current)
φD
F
φd
(20℃)
0.01CV or 3 whichever is larger (after 5 minutes) C : Rated capacitance (µF) ; V: Rated voltage (V)
Tangent of loss angle
(tanδ)
Vent
(20℃,120Hz)
Part numbering system (example : 25V100µF)
16
7.5
0.8
18
7.5
0.8
ROS
Series code
̶
25
Rated voltage
symbol
V
101
M
Rated capacitance
Capacitance
symbol
tolerance symbol
H4 #5 ̶
Casing
symbol
Taping (Forming)
symbol
2.0
(φ10,16L or less : 1.5)
Case symbol
Case
Case
Case
Case
Casing
Casing
Casing
Casing
φD×L (mm) Symbol φD×L (mm) Symbol φD×L (mm) Symbol φD×L (mm) Symbol
6.3×11
F3
10×16
H4
12.5×25
Ⅰ6
16×35.5
J8
8×11.5
G3
10×20
H5
16×25
J6
18×35.5
K8
10×12.5
H3
12.5×20
Ⅰ5
16×31.5
J7
18×40
K9
Standard Ratings
Rated voltage (V)
Item
Rated
capacitance (µF)
10
22
33
47
100
220
330
470
1000
2200
16
25
35
50
63
100
Rated ripple current
Rated ripple current
Rated ripple current
Rated ripple current
Rated ripple current
Rated ripple current
Case
Case
Case
Case
Case
Case
φD×L (mm)
(mArms)
(mArms)
(mArms)
(mArms)
(mArms)
(mArms)
φD×L (mm)
φD×L (mm)
φD×L (mm)
φD×L (mm)
φD×L (mm)
̶
̶
̶
̶
8×11.5
75
8×11.5
75
10×16
95
6.3×11
55
70
80
6.3×11
6.3×11
10×12.5
130
10×16
140
10×20
155
8×11.5
95
90
120
6.3×11
8×11.5
10×16
175
10×20
190
12.5×20
220
10×12.5
140
125
140
8×11.5
8×11.5
10×16
210
10×20
225
12.5×25
285
10×12.5
170
215
270
10×12.5
10×16
12.5×20
380
12.5×25
415
16×25
485
10×20
295
385
505
10×20
12.5×20
16×25
720
16×31.5
785
18×40
930
12.5×25
550
̶
̶
545
675
12.5×20
12.5×25
16×31.5
965
16×35.5
1010
16×25
785
̶
̶
710
940
12.5×25
16×25
16×35.5
1210
18×35.5
1295
16×31.5
1030
̶
̶
̶
̶
1315
1575
16×31.5
16×35.5
18×40
1985
18×35.5
1690
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
2150
18×40
(Note) Rated ripple current : 85℃, 120Hz.
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
ROB
®
ROB
MINIATURE
ALUMINUM
ELECTROLYTIC
CAPACITORS
FOR AUDIO
MINIATURE
ALUMINUM
ELECTROLYTIC
CAPACITORS
FOR AUDIO
For
Audio
GREEN
CAP
Miniature Standard Capacitors for Audio
TONEREX
●
●
Adopting the newly developed formation method and composite electrolytic paper
for audio application has reduced distortion, achieving high-quality sound.
All lead wires are oxygen-free copper wires to reduce distortion.
Marking color : Gold print on a black sleeve
Specifications
Item
Performance
ー40 to +85
±20
Category temperature range (℃)
Tolerance at rated capacitance (%)
Leakage current (µA)
(max.)
(20℃,120Hz)
0.01CV or 4 whichever is larger (after 5 minutes) C : Rated capacitance (µF) ; V: Rated voltage (V)
Rated voltage (V)
tanδ (max.)
Tangent of loss angle
(tanδ)
6.3
0.24
10
0.20
16
0.16
35
0.12
50
0.10
63
0.09
100
0.08
(20℃,120Hz)
0.02 is added to every 1000µF increase over 1000µF
Test time
Leakage current
Percentage of capacitance change
Tangent of the loss angle
Endurance (85℃)
(Applied ripple current)
Shelf life (85℃)
Applicable standards
1000 hours
The initial specified value or less
Within ±20% of initial value
150% or less of the initial specified value
Test time : 1000hours ; other items are same as the endurance. Voltage application treatment : According to JIS C5101-4 4.1
JIS C5101 - 1,- 4 (IEC 60384 - 1,- 4)
Outline Drawing
Coefficient of Frequency for Rated Ripple Current
Unit : mm
Sleeve
Vent (except φ5)
Rated voltage (V)
φd±0.05 copper wire (tinned)
Frequency (Hz)
CV (µF×WV)
6.3 to 16
F±0.5
φD±0.5/0
L+αmax.
50 to 100
5
min.
15min.
6.3
2.5
0.6
α
8
3.5
0.6
10
5.0
0.6
12.5
5.0
0.8
120
1k
10k
100k
0.8
0.8
0.8
0.8
0.8
1
1
1
1
1
1.1
1.5
1.2
1.6
1.2
1.2
1.7
1.3
1.9
1.3
1.2
1.7
1.3
1.9
1.3
Part numbering system (example : 25V100µF)
ROB
5
2.0
0.6
50・60
All CV value
≤1000
1000<
≤1000
1000<
25 to 35
φD
F
φd
25
0.14
(20℃)
16
7.5
0.8
̶
Series code
18
7.5
0.8
25
V
Rated voltage
symbol
101
M
G3 # ̶
Rated capacitance Capacitance
symbol
tolerance symbol
Taping (Forming)
symbol
Casing
symbol
2.0
(φ10,16L or less : 1.5)
1.5
Case symbol
Case
φD×L (mm)
5×11
6.3×11
8×11.5
Casing
Symbol
E3
F3
G3
Case
φD×L (mm)
10×12.5
10×16
10×20
Casing
Symbol
H3
H4
H5
Case
Case
Casing
Symbol φD×L (mm)
16×31.5
Ⅰ5
16×35.5
Ⅰ6
18×35.5
J6
18×40
φD×L (mm)
12.5×20
12.5×25
16×25
Casing
Symbol
J7
J8
K8
K9
Standard Ratings
6.3
Rated voltage (V)
Rated
capacitance (µF)
Item
Case
φD×L (mm)
10
̶
̶
̶
̶
̶
22
̶
1
2.2
3.3
4.7
10
Case
Rated ripple
current
(mArms)
̶
̶
̶
̶
̶
̶
φD×L (mm)
̶
̶
̶
̶
̶
16
Rated ripple
current
(mArms)
̶
̶
̶
̶
̶
5×11
50
Case
φD×L (mm)
̶
̶
̶
̶
25
Rated ripple
current
(mArms)
̶
̶
̶
̶
Case
φD×L (mm)
̶
̶
̶
35
Rated ripple
current
(mArms)
̶
̶
̶
5×11
25
Case
φD×L (mm)
̶
̶
̶
̶
50
Rated ripple
current
(mArms)
̶
̶
̶
̶
Case
φD×L (mm)
63
Rated ripple
current
(mArms)
Case
φD×L (mm)
̶
̶
̶
100
Rated ripple
current
(mArms)
̶
̶
̶
Case
φD×L (mm)
Rated ripple
current
(mArms)
5×11
10
5×11
20
5×11
25
5×11
35
5×11
35
6.3×11
60
8×11.5
70
8×11.5
100
10×12.5
120
5×11
35
5×11
40
5×11
45
5×11
50
5×11
60
5×11
60
6.3×11
75
6.3×11
80
6.3×11
5×11
15
5×11
25
5×11
30
6.3×11
40
33
5×11
55
5×11
65
5×11
70
6.3×11
80
90
8×11.5
110
8×11.5
115
10×16
160
47
5×11
65
5×11
75
6.3×11
95
6.3×11
100
8×11.5
120
8×11.5
130
10×12.5
165
10×20
210
100
6.3×11
110
6.3×11
120
8×11.5
150
165
10×12.5
210
10×16
250
10×20
285
12.5×20
340
620
8×11.5
220
8×11.5
185
8×11.5
200
10×12.5
265
10×16
310
10×20
365
12.5×20
440
12.5×20
470
16×25
330
10×12.5
265
10×12.5
290
10×16
350
10×20
410
12.5×20
500
12.5×20
540
12.5×25
620
16×31.5
820
470
10×12.5
315
10×16
380
10×20
460
12.5×20
550
12.5×25
640
16×25
800
16×25
840
18×35.5
1000
1000
10×20
550
12.5×20
670
12.5×25
810
16×25
1000
16×25
1050
2200
12.5×25
980
16×25
1200
16×25
1350
16×35.5
1650
18×35.5
1900
3300
16×25
1300
16×31.5
1600
16×35.5
1800
18×40
2100
4700
16×31.5
1700
16×35.5
1900
18×35.5
2400
6800
16×35.5
2100
18×40
2600
18×40
2800
10000
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
16×31.5
̶
̶
̶
̶
̶
1200
̶
̶
̶
̶
̶
18×35.5
̶
̶
̶
̶
̶
1500
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
(Note) Rated ripple current : 85℃, 120Hz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
RFO
RFO
MINIATURE
ALUMINUM
ELECTROLYTIC
CAPACITORS
FOR
AUDIO
MINIATURE
ALUMINUM
ELECTROLYTIC
CAPACITORS
FOR
AUDIO
Miniature Capacitors for Audio (PURECAP)
●
●
●
®
For
Audio
GREEN
CAP
A standard capacitor utilizing a newly developed material for a high grade of audio
reproduction.
All lead wires are copper plated steel wires.
New type miniaturized capacitor for audio,
New type
using synthetic mica paper for the separator.
RFO
RA2
Marking color : Gold print on a black sleeve
Specifications
Item
Performance
ー40 to +85
±20
Category temperature range (℃)
Tolerance at rated capacitance (%)
Leakage current (µA)
(max.)
(20℃,120Hz)
6.3
0.22
Rated voltage (V)
tanδ (max.)
Tangent of loss angle
(tanδ)
10
0.19
16
0.16
25
0.14
35
0.12
50
0.10
63
0.09
100
0.08
(20℃,120Hz)
0.02 is added to every 1000µF increase over 1000µF
1000 hours
The initial specified value or less
Within ±20% of initial value
150% or less of the initial specified value
Test time
Leakage current
Percentage of capacitance change
Tangent of the loss angle
Endurance (85℃)
(Applied ripple current)
Test time : 1000hours ; other items are same as the endurance. Voltage application treatment : According to JIS C5101-4 4.1
JIS C5101 - 1,- 4 (IEC 60384 - 1,- 4)
Shelf life (85℃)
Applicable standards
Outline Drawing
Coefficient of Frequency for Rated Ripple Current
Unit : mm
Sleeve
Vent (except φ5)
Frequency(Hz)
Rated voltage(V)
φd±0.05 copper plated steel wire (tinned)
CV(µFxWV)
6.3 to 16
F±0.5
φD+0.5/0
L+α max.
5
2.0
0.5
6.3
2.5
0.5
8
3.5
0.6
10
5.0
0.6
12.5
5.0
0.6
120
1k
10k
100k
0.8
0.8
0.8
0.8
0.8
1
1
1
1
1
1.1
1.5
1.2
1.6
1.2
1.2
1.7
1.3
1.9
1.3
1.2
1.7
1.3
1.9
1.3
Part numbering system (example : 25V100µF)
16
7.5
0.8
RFO
18
7.5
0.8
̶
25
Rated voltage
symbol
Series code
V
101
M
Rated capacitance
symbol
F3 P# ̶
Taping (Forming)
symbol
Capacitance
Casing
tolerance symbol symbol
2.0
(φ10,16L or less : 1.5)
1.5
α
50 to 100
5
min.
15min.
50・60
All CV value
≤1000
1000<
≤1000
1000<
25 to 35
φD
F
φd
(20℃)
0.01CV or 3 whichever is larger (after 2 minutes) C : Rated capacitance (µF) ; V : Rated voltage (V)
Case symbol
Casing
Casing
Casing
Casing
Case
Case
Case
Case
φD×L (mm) Symbol φD×L (mm) Symbol φD×L (mm) Symbol φD×L (mm) Symbol
5×11
E3
10×12.5
H3
12.5×20
Ⅰ5
16×31.5
J7
6.3×11
F3
10×16
H4
12.5×25
Ⅰ6
18×35.5
K8
8×11.5
G3
10×20
H5
16×25
J6
Standard Ratings
6.3
Rated voltage (V)
10
Rated ripple
16
Rated ripple
25
Rated ripple
35
Rated ripple
50
Rated ripple
63
Rated ripple
100
Rated ripple
Rated ripple
Case
Case
Case
Case
Case
Case
Case
Case
Item
current
current
current
current
current
current
current
current
Rated
φD×L (mm) (mArms) φD×L (mm) (mArms) φD×L (mm) (mArms) φD×L (mm) (mArms) φD×L (mm) (mArms) φD×L (mm) (mArms) φD×L (mm) (mArms) φD×L (mm) (mArms)
capacitance (µF)
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
5×11
15
5×11
15
1
2.2
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
5×11
20
̶
̶
5×11
25
3.3
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
5×11
25
̶
̶
5×11
30
4.7
̶
̶
̶
̶
̶
̶
̶
̶
5×11
30
5×11
30
5×11
35
5×11
35
10
̶
̶
̶
̶
̶
̶
̶
̶
5×11
45
5×11
45
5×11
50
6.3×11
22
̶
̶
̶
̶
5×11
60
5×11
70
6.3×11
85
33
̶
̶
5×11
55
6.3×11
47
̶
̶
5×11
65
8×11.5
60
110
50
5×11
55
5×11
60
5×11
70
5×11
80
6.3×11
100
100
10×12.5
160
5×11
75
5×11
85
6.3×11
110
6.3×11
120
8×11.5
150
10×16
210
6.3×11
120
6.3×11
5×11
100
5×11
85
5×11
95
140
8×11.5
190
210
10×12.5
260
12.5×20
380
220
6.3×11
150
6.3×11
165
8×11.5
220
8×11.5
250
10×12.5
330
10×16
400
10×20
460
16×25
720
330
6.3×11
180
8×11.5
240
8×11.5
270
10×12.5
370
10×16
450
10×20
540
12.5×20
650
16×25
8×11.5
260
8×11.5
280
10×12.5
390
10×16
480
10×20
590
12.5×20
740
12.5×25
850
16×31.5
10×12.5
12.5×25
470
8×11.5
880
1150
450
10×16
540
10×20
680
12.5×20
880
1050
16×25
1350
1550
̶
̶
2200
12.5×20
890
12.5×20
970
12.5×25
1200
16×25
1550
16×31.5
1750
18×35.5
2100
̶
̶
̶
̶
3300
12.5×20
1050
12.5×25
1250
16×25
1600
16×31.5
1950
18×35.5
2250
̶
̶
̶
̶
̶
̶
4700
16×25
1550
16×25
1650
16×31.5
2050
18×35.5
2500
̶
̶
̶
̶
̶
̶
̶
̶
6800
16×25
1750
16×31.5
2050
18×35.5
2550
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
10000
16×31.5
2150
18×35.5
2550
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
15000
18×35.5
2700
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
1000
̶
16×31.5
(Note) Rated ripple current : 85℃, 120Hz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
RA3
GREEN
CAP
Miniature Capacitors for Audio
●
●
●
RA3
MINIATURE MINIATURE
ALUMINUM ALUMINUM
ELECTROLYTIC
CAPACITORS
FOR AUDIOFOR AUDIO
ELECTROLYTIC
CAPACITORS
®
For
Audio
With the same size as that for Series RE3 miniaturized standard capacitors,
a high resolution sound quality grade has been realized.
The newly developed audio use material makes
Miniaturized
clear sound a reality.
RA3
RA2
All lead wires are copper plated steel wires.
Marking color : White print on a brown sleeve
Specifications
Item
Performance
ー40 to +85
±20
Category temperature range (℃)
Tolerance at rated capacitance (%)
Leakage current (µA)
(max.)
(20℃,120Hz)
0.01CV or 3 whichever is larger (after 2 minutes) C : Rated capacitance (µF) ; V : Rated voltage (V)
Rated voltage (V)
tanδ (max.)
Tangent of loss angle
(tanδ)
6.3
0.28
10
0.24
16
0.20
35
0.14
50
0.12
63
0.11
100
0.10
(20℃,120Hz)
0.02 is added to every 1000µF increase over 1000µF
Test time
Leakage current
Percentage of capacitance change
Tangent of the loss angle
Endurance (85℃)
(Applied ripple current)
Shelf life (85℃)
Applicable standards
2000 hours
The initial specified value or less
Within ±20% of initial value
200% or less of the initial specified value
Test time : 1000hours ; other items are same as the endurance. Voltage application treatment : According to JIS C5101-4 4.1
JIS C5101 - 1,
- 4 (IEC 60384 - 1,
- 4)
Outline Drawing
Coefficient of Frequency for Rated Ripple Current
Unit : mm
Sleeve
Vent (exceptφ5)
Frequency (Hz)
Rated voltage(V)
φd±0.05 copper plated steel wire (tinned)
CV (µF×WV)
L+α max.
5
2.0
0.5
6.3
2.5
0.5/0.6
α
8
3.5
0.6
50 to 100
5
min.
15min.
10
5.0
0.6
12.5
5.0
0.6
120
1k
10k
100k
0.8
0.8
0.8
0.8
0.8
1
1
1
1
1
1.1
1.5
1.2
1.6
1.2
1.2
1.7
1.3
1.9
1.3
1.2
1.7
1.3
1.9
1.3
Part numbering system (example : 25V100µF)
16
7.5
0.8
18
7.5
0.8
RA3
̶
25
Rated voltage
symbol
Series code
2.0
(φ10,16L or less : 1.5)
1.5
50・60
All CV value
≤1000
1000<
≤1000
1000<
25 to 35
F±0.5
φD+0.5/0
6.3 to 16
φD
F
φd
25
0.16
(20℃)
V
101
M
F3 #8 ̶
Taping (Forming)
symbol
Casing
symbol
Rated capacitance
Capacitance
symbol
tolerance symbol
Case symbol
Case
Case
Case
Case
Casing
Casing
Casing
Casing
φD×L (mm) Symbol φD×L (mm) Symbol φD×L (mm) Symbol φD×L (mm) Symbol
J7
5×11
E3
10×12.5
H3
12.5×20
Ⅰ5
16×31.5
6.3×11
F3
10×16
H4
12.5×25
Ⅰ6
18×35.5
K8
8×11.5
G3
̶
̶
10×20
H5
16×25
J6
Standard Ratings
6.3
Rated voltage (V)
10
Rated ripple
16
Rated ripple
25
Rated ripple
35
Rated ripple
50
Rated ripple
63
Rated ripple
100
Rated ripple
Rated ripple
Case
Case
Case
Case
Case
Case
Case
Item Case
current
current
current
current
current
current
current
current
Rated
φD×L (mm) (mArms) φD×L (mm) (mArms) φD×L (mm) (mArms) φD×L (mm) (mArms) φD×L (mm) (mArms) φD×L (mm) (mArms) φD×L (mm) (mArms) φD×L (mm) (mArms)
capacitance (µF)
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
5×11
21
5×11
21
1
2.2
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
5×11
31
̶
̶
5×11
31
3.3
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
5×11
38
̶
̶
5×11
40
4.7
̶
̶
̶
̶
̶
̶
̶
5×11
50
̶
̶
̶
̶
5×11
45
̶
10
̶
̶
̶
̶
5×11
50
5×11
55
5×11
60
5×11
66
5×11
70
5×11
70
22
̶
̶
̶
̶
5×11
75
5×11
90
5×11
95
5×11
100
5×11
105
6.3×11
115
33
̶
̶
̶
̶
5×11
110
5×11
110
5×11
110
5×11
110
6.3×11
130
8×11.5
158
47
̶
̶
̶
̶
5×11
130
5×11
130
5×11
130
6.3×11
155
6.3×11
160
8×11.5
188
100
5×11
130
5×11
150
5×11
180
6.3×11
199
6.3×11
214
8×11.5
250
220
5×11
240
6.3×11
250
6.3×11
280
10×12.5
429
330
6.3×11
300
6.3×11
470
6.3×11
380
8×11.5
8×11.5
349
8×11.5
350
8×11.5
270
10×16
358
10×16
505
12.5×20
663
330
8×11.5
383
8×11.5
383
10×12.5
542
10×16
595
10×20
676
12.5×25
886
417
8×11.5
480
10×12.5
545
10×16
664
12.5×20
887
12.5×20
924
16×25
1230
12.5×25
18×35.5
2210
580
10×12.5
650
10×16
791
10×20
996
12.5×20
1210
1400
16×25
1710
2200
10×16
939
10×20
1080
12.5×20
1350
12.5×25
1660
16×25
1950
16×31.5
2340
18×35.5
2870
̶
̶
3300
10×20
1230
12.5×20
1430
12.5×25
1690
16×25
2030
16×31.5
2320
18×35.5
2810
̶
̶
̶
̶
4700
12.5×20
1710
12.5×25
1780
16×25
2100
16×31.5
2650
18×35.5
2990
̶
̶
̶
̶
̶
̶
6800
12.5×25
1930
16×25
2270
16×31.5
2480
18×35.5
3290
̶
̶
̶
̶
̶
̶
̶
̶
10000
16×25
2450
16×31.5
2500
18×35.5
3130
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
15000
16×31.5
2580
18×35.5
3100
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
22000
18×35.5
3150
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
1000
8×11.5
̶
(Note) Rated ripple current : 85℃, 120Hz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
RW5
RW5
MINIATUREALUMINUM
ALUMINUMELECTROLYTIC
ELECTROLYTIC
CAPACITORS
FOR
AUDIO
MINIATURE
CAPACITORS
FOR
AUDIO
105℃ Miniature Capacitors for Audio
●
●
GREEN
CAP
105˚C
1000hours
®
For
Audio
With the same size as that for Series RJ5 miniaturized standard capacitors,
a high resolution sound quality grade has been realized.
Guarantees 1000 hours at 105℃
High temperature
RW5
RA3
Specifications
Item
Tolerance at rated capacitance (%)
Performance
ー55 to +105
±20
Leekage current (µA)
(max.)
0.03CV or 4 whichever is larger (after 1 minutes)
C : Rated capacitance (µF) , V : Rated voltage (V)
Category temperature range (℃)
Rated voltage (V)
tanδ (max.)
Tangent of loss angle
(tanδ)
Marking color : Gold print on a black sleeve
(20℃,120Hz)
(20℃)
16
0.24
25
0.20
0.02CV is added to every 1000µF increase over 1000µF
Rated voltage (V)
Z−25℃/Z+20℃
Z−40℃/Z+20℃
Characteristics at high
and low temperature
(20℃,120Hz)
16
3
6
Impedance ratio (max.)
25
2
4
(120Hz)
Test time
Leakage current
Percentage of capacitance change
Tangent of the loss angle
Endurance (105℃)
(Applied ripple current)
1000 hours
The initial specified value or less
Within ±20% of initial value
200% or less of the initial specified value
Test time : 1000hours ; other items are same as the endurance. Voltage application treatment : According to JIS C5101-4 4.1
JIS C5101 - 1,- 4 (IEC 60384 - 1,- 4)
Shelf life (105℃)
Applicable standerds
Outline Drawing
Unit : mm
φd±0.05 copper plated steel wire (tinned)
Sleeve
F±0.5
φD+0.5/0
Vent (except φ5)
L+αmax.
15min.
Coefficient of Frequency for Rated Ripple Current
Frequency (Hz)
Rated
Capacitance (µF)
100 to 220
330 to 1000
2200 to 15000
5
2.0
0.5
1.0
6.3
2.5
0.5
1.0
8
3.5
0.6
1.0
10
5.0
0.6
2.0
12.5
5.0
0.6
2.0
RW5 ̶
16
7.5
0.8
2.0
120
1k
10k
100k
0.8
0.8
0.8
1
1
1
1.2
1.2
1.1
1.3
1.2
1.1
1.4
1.3
1.1
Part numbering system (example : 16V3300µF)
5
min.
Series code
φD
F
φd
α
50・60
16
Rated voltage
symbol
V
332
M
Rated capacitance
Capacitance
symbol
tolerance symbol
Ⅰ6
Casing
symbol
# ̶
Taping (Forming)
symbol
18
7.5
0.8
2.0
Standard Ratings
Rated voltage (V)
Item
Rated
capacitance (µF)
100
220
330
470
1000
2200
3300
4700
6800
10000
15000
16
Case
Casing
φD×L(mm) symbol
̶
̶
Rated ripple current
(mArms)
̶
6.3×11.5
6.3×11.5
8×12
10×12.5
F3
F3
G3
H3
190
225
323
500
10×20
H5
710
12.5×25
16×20
16×25
18×20
16×25
18×20
16×35.5
18×40
Ⅰ6
J5
J6
K5
J6
K5
J8
K9
1200
1250
1500
1460
1600
1560
1930
2210
25
Case
Casing
φD×L(mm) symbol
E3
5×11.5
F3
6.3×11.5
G3
8×12
H3
10×12.5
H4
10×16
12.5×25
Ⅰ6
16×20
J5
18×16
K4
16×25
J6
18×20
K5
16×25
J6
18×20
K5
16×35.5
J8
18×31.5
K7
18×40
K9
̶
̶
Rated ripple current
(mArms)
125
200
310
429
610
1180
1230
1200
1440
1400
1570
1530
1850
1870
2000
̶
(Note) Rated ripple current : 105℃, 120Hz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
RBD
®
Miniature Bipolar Capacitors for Audio
●
●
RBD
MINIATURE
ALUMINUM
ELECTROLYTIC
CAPACITORS
FOR AUDIO
MINIATURE
ALUMINUM
ELECTROLYTIC
CAPACITORS
FOR AUDIO
GREEN
CAP
For
Audio
The newly developed audio use foil and special electrolyte
makes clear and far-carrying sound a reality.
All lead wires are copper plated steel wires.
Tone quality improvements
RBD
R2B
Marking color : Gold print on a black sleeve
Specifications
Item
Performance
ー40 to +85
±20
Category temperature range (℃)
Tolerance at rated capacitance (%)
Leakage current (µA)
(max.)
(20℃,120Hz)
0.03CV + 3 (after 5 minutes) C : Rated capacitance (µF); V : Rated voltage (V)
Rated voltage (V)
tanδ (max.)
Tangent of loss angle
(tanδ)
6.3
0.24
10
0.20
16
0.16
25
0.15
35
0.14
(20℃)
50
0.12
63
0.10
100
0.09
(20℃,120Hz)
0.02 is added to every 1000µF increase over 1000µF.
Rated voltage (V)
Impedance ratio
Z−25℃/Z+20℃
(max.)
Z−40℃/Z+20℃
Characteristics at high
and low temperature
6.3
4
10
10
3
8
16
2
6
25
2
4
35
2
3
50
2
3
63
2
3
100
2
3
0.5 for −25°
C, 1 for −40°
C are added to every 1000µF increase over 1000µF.
Test time
Leakage current
Percentage of capacitance change
Tangent of the loss angle
Endurance (85℃)
(Applied ripple current)
2000 hours (with the polarity inverted every 250 hours)
The initial specified value or less
Within ±20% of initial value
150% or less of the initial specified value
JIS C5101 - 1,
- 4 1998 (IEC 60384 - 1,
- 4)
Applicable standards
Outline Drawing
Coefficient of Frequency for Rated Ripple Current
Unit : mm
Frequency (Hz)
Rated voltage (V)
6.3 to 16
25 to 35
50 to 100
φd±0.05 copper plated steel wire (tinned)
Sleeve
F±0.5
φD+0.5/0
Vent (exceptφ5)
L+α max.
φD
F
φd
(120Hz)
5
2.0
0.5
6.3
2.5
0.5
8
3.5
0.6
10
5.0
0.6
1k
10k・100k
1
1
1
1.1
1.5
1.6
1.2
1.7
1.9
RBD
16
7.5
0.8
̶
Series code
18
7.5
0.8
10
Rated voltage
symbol
V
102
M
Ⅰ5
Rated capacitance
Capacitance
symbol
tolerance symbol
#
̶
Taping (Forming)
symbol
Casing
symbol
2.0
(φ10,16L or less : 1.5)
1.5
α
12.5
5.0
0.6
120
0.8
0.8
0.8
Part numbering system (example : 10V1000µF)
5
min.
15min.
50・60
Case symbol
Case
Case
Case
Case
Casing
Casing
Casing
Casing
φD×L (mm) Symbol φD×L (mm) Symbol φD×L (mm) Symbol φD×L (mm) Symbol
5×11
E3
10×12.5
H3
12.5×20
Ⅰ5
16×31.5
J7
6.3×11
F3
10×16
H4
12.5×25
Ⅰ6
18×35.5
K8
8×11.5
G3
10×20
H5
16×25
J6
̶
̶
Standard Ratings
6.3
Rated voltage (V)
Rated
capacitance (µF)
Item
Case
φD×L (mm)
10
16
25
35
50
Rated ripple
current
Case
Rated ripple
current
Case
Rated ripple
current
Case
Rated ripple
current
Case
Rated ripple
current
Case
63
Rated ripple
current
100
Case
Rated ripple
current
Case
Rated ripple
current
(mArms) φD×L (mm) (mArms) φD×L (mm) (mArms) φD×L (mm) (mArms) φD×L (mm) (mArms) φD×L (mm) (mArms) φD×L (mm) (mArms) φD×L (mm) (mArms)
1
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
5×11
14
̶
̶
5×11
16
2.2
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
5×11
21
5×11
23
5×11
24
3.3
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
5×11
26
5×11
28
6.3×11
34
4.7
̶
̶
̶
̶
̶
̶
6.3×11
̶
̶
̶
̶
̶
̶
10
5×11
39
5×11
28
5×11
28
5×11
31
5×11
34
5×11
40
5×11
42
5×11
45
6.3×11
57
6.3×11
8×11.5
41
70
5×11
52
5×11
58
5×11
60
6.3×11
71
77
8×11.5
89
10×16
33
5×11
58
5×11
63
5×11
71
6.3×11
84
6.3×11
87
8×11.5
111
10×12.5
144
10×20
181
47
5×11
69
5×11
75
6.3×11
97
6.3×11
100
8×11.5
122
10×12.5
157
10×16
188
12.5×20
248
100
6.3×11
115
6.3×11
22
136
126
8×11.5
167
10×12.5
204
10×12.5
212
10×20
273
12.5×20
343
16×25
458
8×11.5
202
8×11.5
221
10×12.5
294
10×16
332
10×20
375
12.5×25
506
16×25
645
18×35.5
837
330
8×11.5
247
10×12.5
322
10×16
394
10×20
444
12.5×20
526
12.5×25
620
̶
̶
̶
̶
470
10×12.5
350
10×16
420
10×20
513
12.5×20
607
12.5×25
685
16×25
861
̶
̶
̶
̶
1000
10×20
611
12.5×20
767
12.5×25
935
16×25
1120
1270
̶
̶
̶
̶
̶
̶
2200
12.5×25
1090
16×25
1380
1660
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
3300
16×25
1490
16×31.5
1760
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
4700
16×31.5
1880
18×35.5
2280
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
220
16×31.5
16×31.5
(Note) Rated ripple current : 85℃, 120Hz
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
LAO
LAO
LARGE
CAPACITANCE
ALUMINUM
ELECTROLYTIC
LARGE
CAPACITANCE
ALUMINUM
ELECTROLYTIC
CAPACITORS
FOR
AUDIO
CAPACITORS FOR AUDIO
®
GREEN
CAP
Power Supply Smoothing Use,Standard Capacitors for Audio
●
●
For
Audio
Best suited as power supply filters for sound quality priority audio equipment.
Printed circuit board terminal snap-in type.
For audio
LAO
LA5
Marking color : Gold print on a black sleeve
Specifications
Performance
ー40 to +85
±20
Item
Category temperature range (℃)
Tolerance at rated capacitance (%)
Leakage current (µA)
(max.)
(20℃,120Hz)
0.03CV or 5mA whichever is larger (after 5 minutes) C : Rated capacitance (µF), V : Rated voltage (V)
Rated voltage (V)
tanδ (max.)
Tangent of loss angle
(tanδ)
16, 25
0.40
35
0.35
(20℃)
50 to 100
0.30
(20℃,120Hz)
Rated voltage (V)
Impedance ratio
Z−25℃/Z+20℃
Z−40℃/Z+20℃
(max.)
Characteristics at high
and low temperature
16 to 35
4
15
50 to 100
3
10
(120Hz)
1000 hours
The initial specified value or less
Within ±20% of initial value
150% or less of the initial specified value
Test time
Leakage current
Percentage of capacitance change
Tangent of the loss angle
Endurance (85℃)
(Applied ripple current)
Test time : 1000hours ; other items are same as the endurance. Voltage application treatment : According to JIS C5101-4 4.1
JIS C5101 - 1,
- 4 (IEC 60384 - 1,
- 4)
Shelf life (85℃)
Applicable standards
Outline Drawing
Unit : mm
Printed circuit board snap-in type (Series LAO)
Frequency (Hz)
16 to 50
63 to 100
0.85±0.15 Thickness : 0.8t
10
120
1k
10k
20k
1
1
1.10
1.16
1.15
1.30
1.15
1.33
Position of PC board holes
L+2max.
4.0±0.5
Vent
(‒)Negative terminal
indicated by cross notching
(0.9)
(4.7)
1.5+0.2
−0.1
Markings
kings
(5.4)
φD+1/0
1
0.
±
10
50
0.95
0.95
Rated voltage (V)
Lug terminal details
2−φ2
Sleeve
Coefficient of Frequency for Rated Ripple Current
Part numbering system (example : 63V6800µF)
LAO
(2.1)
( ) : Reference size
̶
Series code
63
V
Rated voltage
symbol
682
M
S57 PX #
Rated capacitance
Capacitance
symbol
tolerance symbol
Casing
symbol
B
Optional
symbol
Standard Ratings
16
Rated voltage (V)
25
35
50
63
80
100
Rated ripple
Rated ripple
Rated ripple
Rated ripple
Rated ripple
Rated ripple
Rated ripple
Rated
Rated
Rated
Rated
Rated
Rated
Rated
Item capacitance
current
current
current
current
current
current
current
capacitance
capacitance
capacitance
capacitance
capacitance
capacitance
Case
Casing
φD×L (mm)
symbol
22×20
S21
22×25
S22
(µF)
(Arms)
(µF)
(Arms)
(µF)
(Arms)
(µF)
(Arms)
(µF)
(Arms)
(µF)
(Arms)
(µF)
3300
1.2
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
4700
1.5
0.8
1000
0.8
680
0.7
̶
̶
̶
̶
22×30
S23
22×35
S24
̶
22×40
S25
̶
̶
22×45
S26
10000
2.7
22×50
S27
̶
̶
6800
̶
2200
1.0
1500
(Arms)
̶
3300
1.3
2200
1.3
1500
1.1
1000
0.9
680
0.7
̶
̶
2.0
4700
1.7
3300
1.7
̶
̶
2200
̶
1.5
1500
̶
1.2
̶
1000
̶
1.0
̶
680
̶
0.8
̶
̶
6800
̶
̶
2.2
̶
̶
4700
̶
2.3
̶
̶
2200
1.6
̶
̶
̶
̶
̶
3300
2.0
̶
̶
1500
1.3
1000
1.2
25×25
S32
̶
3300
1.7
2200
1.7
1500
1.4
1000
1.2
680
1.0
̶
̶
25×30
S33
6800
2.5
4700
2.1
3300
2.2
2200
1.8
1500
1.5
1000
1.2
680
1.1
25×35
S34
10000
3.2
25×40
S35
̶
̶
̶
25×45
S36
̶
̶
̶
̶
25×50
S37
̶
̶
10000
3.0
6800
̶
2.7
̶
4700
̶
6800
̶
̶
̶
̶
̶
̶
̶
̶
̶
2.8
3300
2.3
2200
1.9
1500
1.6
1000
1.4
̶
̶
̶
̶
̶
̶
̶
̶
̶
2.6
4700
2.4
3300
2.0
2200
2.0
1500
1.8
30×25
S42
6800
2.6
4700
2.2
3300
2.3
2200
1.9
1500
1.6
1000
1.3
680
1.1
30×30
S43
10000
3.3
6800
2.7
4700
2.8
3300
2.4
2200
1.9
1500
1.6
1000
1.4
30×35
S44
̶
̶
̶
̶
30×40
S45
̶
̶
10000
3.1
30×45
S46
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
30×50
S47
̶
̶
̶
̶
10000
3.4
6800
3.1
4700
2.6
3300
2.2
2200
1.8
̶
6800
̶
̶
̶
̶
̶
̶
̶
̶
̶
2.7
4700
2.4
3300
2.1
2200
2.1
1500
1.8
35×25
S52
10000
3.4
6800
2.8
4700
2.9
3300
2.4
2200
2.0
1500
1.7
1000
1.5
35×30
S53
̶
̶
10000
3.1
6800
2.7
4700
2.5
3300
2.1
2200
2.1
1500
1.8
35×35
S54
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
35×40
S55
̶
̶
̶
̶
10000
3.5
6800
3.1
4700
2.6
3300
2.2
2200
1.8
35×45
S56
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
̶
S57
(Note) Rated ripple current : 85℃, 120Hz
̶
̶
̶
̶
̶
̶
6800
3.3
4700
2.7
̶
̶
35×50
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
CAT.No.2021/2022E
TECHNICAL
NOTE
TECHNICAL NOTE
ALUMINUM ELECTROLYTIC
ALUMINUM ELECTROLYTIC
CAPACITORSCAPACITORS
®
1 General Description of Aluminum Electrolytic Capacitors
1-1 The Principle of Capacitor
The principle of capacitor can be presented by the
principle drawing as in Fig.1-1.
When a voltage is applied between the metal electrodes placed opposite on both surfaces of a dielectric, electric charge can be stored proportional to the
voltage.
Q=C・V
Q : Quantity of electricity (C)
V : Voltage (V)
C : Capacitance (F)
Separator sheet
impregnated with electrolyte
Anode foil
Cathode foil
(Virtually, electrode for
cathode extraction)
Anodic oxide film
Natural air oxide film
Electrolyte
(True cathode)
Fig.1-2
1-2 Equivalent Circuit of the Capacitor
The electrical equivalent circuit of the aluminum electrolytic capacitor is as presented in the following figure.
t
S
D1
R1
C1
R2
C2
L
R3
Fig.1-1
C. called the capacitance of capacitor, is expressed by
the following expression with the electrode area S[m2],
the electrode spacing t [m] and the dielectric constant
of dielectric “ε”:
S
C[F]=ε0・ε・——
t
ε0 : Dielectric constant in vacuum (=8.85×1012F/m)
The dielectric constant of an aluminum oxide film is
7 to 8. Larger capacitances can be obtained by enlarging the electrode area S or reducing t.
Table 1-1 shows the dielectric constants of typical dielectrics used in the capacitor. In many cases, capacitor
names are determined by the dielectric material used,
for example, aluminum electrolytic capacitor, tantalum
capacitor, etc.
Table 1
Dielectric
Dielectric Constant
Dielectric
Dielectric Constant
Aluminum oxide film
7 to 8
Porcelain (ceramic)
10 to 120
Mylar
3.2
Mica
6 to 8
Polystyrene
Tantalum oxide film
2.5
10 to 20
Although the aluminum electrolytic capacitor is small,
it has a large capacitance. It is because the electrode
area is roughened by electrochemical etching, enlarging the electrode area and also because the dielectric is very thin.
The schematic cross section of the aluminum electrolytic capacitor is as in Fig.1-2.
NOTE : Design,
Specifications are subject to change without notice.
It is recommended that you shall obtain technical specifications
from ELNA to ensure that the component is suitable for your use.
R1 : Resistance of terminal and electrode
R2 : Resistances of anodic oxide film and electrolyte
R3 : Insulation resistance because of defective anodic
oxide film
D1 : Oxide semiconductor of anode foil
C1 : Capacity of anode foil
C2 : Capacity of cathode foil
L : Inductance caused by terminals, electrodes, etc.
2 About the Life of an Aluminum Electrolytic
Capacitor
2-1 Estimation of life with minimal ripple current
(negligible).
Generally, the life of an aluminum electrolytic capacitor
is closely related with its ambient temperature and the
life will be approximately the same as the one obtained
by Arrhenius’ equation.
T
0−T
̶
10
L= L0× 2
………………(1)
Where L : Life at temperature T
L0 : Life at temperature T0
)
)
CAT.No.2021/2022E
TECHNICAL NOTE
®
TECHNICAL NOTE
ALUMINUM ELECTROLYTIC
ALUMINUM ELECTROLYTIC
CAPACITORS
CAPACITORS
2-2 Estimation of life considering the ripple current.
The ripple current affects the life of a capacitor
because the internal loss (ESR) generates heat. The
generated heat will be :
P =Ⅰ2R………………(2)
WhereⅠ : Ripple current (Arms)
R : ESR (Ω)
With increase in the temperature of the capacitor:
2
xR
̶
………………(3)
Δ T =Ⅰ
A xH
Where Δ T : Temperature increase in the capacitor
core(deg.)
Ⅰ : Ripple current (Arms)
R : ESR (Ω)
A : Surface area of the capacitor (cm2)
H : Radiation coefficient (Approx. 1.5 to 2.0
× 10 -3W/cm2×℃)
The above equation (3) shows that the temperature of
a capacitor increases in proportion to the square of
the applied ripple current and ESR, and in inverse
proportion to the surface area. Therefore, the amount
of the ripple current determines the heat generation,
which affects the life. The value of Δ T varies depending on the capacitor types and operating conditions. The usage is generally desirable if Δ T remains
less than 5℃. The measuring point for temperature
increase due to ripple current is shown below ;
Measuring point
)
)
)
)
)
)
T̶
0ーT
T0ーΔT
Δ̶
10
10
×K
………(5)
L = Lr × 2
Where Lr : Life at the upper category temperature
with the rated ripple current (h)
ΔT0 : Temperature increase at capacitor core,
at the upper category temperature (deg.)
(3) The life equation considering the ambient temperature and the ripple current will be a conversion of
the above equation (5), as below :
) )
Ⅰ 2
ΔT0
T̶
0ーT
1ー ̶ × ̶
Ⅰ
0
10 ……(6)
L = Lr × 2 10 × K
WhereⅠ0 : Rated ripple current at the upper category
temperature (Arms)
Ⅰ : Applied ripple current (Arms)
(4)The life equation considering the ambient temperature, ripple current and applied voltage will be the
below (7) by adding the effectiveness of the voltage
deration.
(Apply to the rated voltage 200V to 500V of LA*, LT*,
LJ* series)
Ⅰ 2
ΔT0
T0ーT
̶
1ー ̶ ・ ̶
Vr
Ⅰ
0
10 ・ ̶
10
L = Lr・ 2
・K
Va
2.5
…
(7)
Vr : Rated voltage (V)
Va : Applied voltage (V)
Except, when Va/Vr