PRODUCT FAMILY DATA SHEET
XLamp® XHP70.3 LEDs
XHP70.3 High Density
XHP70.3 High Intensity
PRODUCT DESCRIPTION
FEATURES
The XLamp® XHP70.3 LEDs are the third generation of Extreme
• Available in white, configurable to 6 V or 12 V by PCB layout
High Power LEDs that deliver the best lumen density, reliability and
• Available in 5-step EasyWhite® bins at 3000 K to 5000 K
optical control available in their size. By leveraging the XHP family
advantages, lighting manufacturers can significantly reduce their
CCT, 3-step EasyWhite bins at 2700 K to 5000 K and 2-step
EasyWhite bins at 2700 K to 4000 K CCT
system cost by using fewer optics, PCBs and heat sinks than
• Available in ANSI white bins at 3000 K to 7000 K CCT
possible with standard LEDs.
• Broadcast color option at 5700 K provides maximum
performance for TV events that require extremely high TLCI
The third generation XHP family LEDs deliver improved optical
performance versus the previous generations, with higher intensity
• Available in standard, 70-, 80-, 90-, and 95‑minimum CRI
options
through optics than the second generation and the XHP family’s
• Binned at 85 °C
highest on-axis intensity.
• Maximum drive current: 7200 mA (6 V), 3600 mA (12 V)
• Low thermal resistance: 0.2 °C/W
XLamp XHP70.3 LEDs are optimized for outdoor and premium
• Wide viewing angle: 120° (HD), 115 (HI)
indoor lighting applications that require large amounts of light
• Unlimited floor life at ≤ 30 ºC/85% RH
output from small luminaires, such as stadium, outdoor area and
• Reflow solderable - JEDEC J‑STD‑020C
architectural spotlight.
• RoHS and REACH compliant
• UL® recognized component (E349212)
Cree LED / 4001 E. Hwy. 54, Suite 2000 / Durham, NC 27709 USA / +1.919.313.5330 / www.cree-led.com
© 2021-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, and the Cree
LED logo are registered trademarks Cree LED. UL® and the UL logo are registered trademarks of UL LLC.
CLD-DS266
REV 6
1
XLAMP ® XHP70.3 LED
TABLE OF CONTENTS
Characteristics........................................................................................................................................................................................................ 3
Flux Characteristics, High Density EasyWhite® Order Codes and Bins............................................................................................................... 4
Flux Characteristics, High Density ANSI White Order Codes and Bins................................................................................................................ 7
Flux Characteristics, High Density Broadcast Order Codes and Bins............................................................................................................... 10
Flux Characteristics, High Intensity EasyWhite® Order Codes and Bins........................................................................................................... 11
Flux Characteristics, High Intensity ANSI White Order Codes and Bins............................................................................................................ 14
Flux Characteristics, High Intensity Broadcast Order Codes and Bins.............................................................................................................. 16
Relative Spectral Power Distribution................................................................................................................................................................... 17
Relative Flux vs. Junction Temperature............................................................................................................................................................... 17
Electrical Characteristics (TJ = 85 °C).................................................................................................................................................................. 18
Relative Flux vs. Current (TJ = 85 °C)................................................................................................................................................................... 19
Relative Chromaticity vs Current (Warm White)................................................................................................................................................. 20
Relative Chromaticity vs Temperature (Warm White)......................................................................................................................................... 21
Typical Spatial Distribution................................................................................................................................................................................... 21
Thermal Design..................................................................................................................................................................................................... 22
Performance Groups - Luminous Flux (TJ = 85 °C)............................................................................................................................................. 23
Performance Groups - Chromaticity.................................................................................................................................................................... 23
EasyWhite® Chromaticity Regions Plotted on the 1931 CIE Curve.................................................................................................................... 27
ANSI Standard Cool White Kits Plotted on ANSI Standard Chromaticity Regions........................................................................................... 28
Standard Warm and Neutral White Kits Plotted on ANSI Standard Chromaticity Regions.............................................................................. 29
Bin and Order-Code Format.................................................................................................................................................................................. 30
Reflow Soldering Characteristics......................................................................................................................................................................... 31
Notes..................................................................................................................................................................................................................... 32
Mechanical Dimensions....................................................................................................................................................................................... 34
Electrical Configuration........................................................................................................................................................................................ 36
Tape and Reel........................................................................................................................................................................................................ 37
Packaging.............................................................................................................................................................................................................. 39
© 2021-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, and the Cree
LED logo are registered trademarks Cree LED. UL® and the UL logo are registered trademarks of UL LLC.
CLD-DS266
REV 6
2
XLAMP ® XHP70.3 LED
CHARACTERISTICS
XHP70.3 LEDs are tested and binned in the 12‑V configuration. See the Mechanical Dimensions section on page 34 for pad layout
options.
Characteristics
Thermal resistance, junction to solder point
Unit
Minimum
Typical
°C/W
0.2
Viewing angle (FWHM) - High Density
degrees
120
Viewing angle (FWHM) - High Intensity
degrees
115
Temperature coefficient of voltage (6 V)*
mV/°C
-2.5
Temperature coefficient of voltage (12 V)
mV/°C
-5.0
◊
ESD withstand voltage (HBM per Mil-Std-883D)
Maximum
V
8000
DC forward current (6 V)*
mA
7200
DC forward current (12 V)
mA
3600
Reverse voltage
V
1
Forward voltage (6 V, @ 2100 mA, 85 °C)*
V
5.6
6.1
Forward voltage (12 V, @ 1050 mA, 85 °C)
V
11.2
12.2
LED junction temperature
°C
150
Note:
◊
*
Thermal resistance measurement was performed per the JEDEC JESD51-14 standard. See the Thermal Resistance Measurement application note
for more details.
Data for the 6‑V configuration is calculated and for reference only.
© 2021-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, and the Cree
LED logo are registered trademarks Cree LED. UL® and the UL logo are registered trademarks of UL LLC.
CLD-DS266
REV 6
3
XLAMP ® XHP70.3 LED
FLUX CHARACTERISTICS, HIGH DENSITY EASYWHITE® ORDER CODES AND BINS
The following table provides order codes for XLamp XHP70.3 High Density LEDs. For a complete description of how the flux and
chromaticity groups are reflected in the bin code and order code nomenclature, please see the Bin and Order Code Formats section
(page 30).
Binning condition: TJ = 85 °C; 12 V, IF = 1050 mA
Reference condition: TJ = 85 °C; 6 V, IF = 2100 mA
Nominal
CCT
CRI
Min
70
5000 K
Typ
Minimum Luminous Flux
3-Step
Group
Flux (lm)
@ 85 °C
Flux (lm)
@ 25 °C*
P4
1965
2164
P2
1830
2015
N4
1710
1883
P2
1830
2015
XHP70D-00-00000D0HP250G
N4
1710
1883
XHP70D-00-00000D0HN450G
N2
1590
1751
XHP70D-00-00000D0HN250G
M4
1485
1635
XHP70D-00-00000D0HM450G
N2
1590
1751
XHP70D-00-00000D0UN250G
M4
1485
1635
M2
1380
1520
80
90
2-Step
Group
Order Code
Group
Order Code
5-Step
Group
Order Code
XHP70D-00-00000D0BP450E
50E
XHP70D-00-00000D0BP250E
XHP70D-00-00000D0BN450E
50G
50G
XHP70D-00-00000D0UM450G
XHP70D-00-00000D0UM250G
Notes
•
Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on
CRI measurements. See the Measurements section (page 32).
•
XLamp XHP70.3 LED order codes specify only a minimum flux bin and not a maximum. Cree LED may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.
•
Flux values @ 25 °C are calculated and for reference only.
© 2021-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, and the Cree
LED logo are registered trademarks Cree LED. UL® and the UL logo are registered trademarks of UL LLC.
CLD-DS266
REV 6
4
XLAMP ® XHP70.3 LED
FLUX CHARACTERISTICS, HIGH DENSITY EASYWHITE® ORDER CODES AND BINS - CONTINUED
Nominal
CCT
CRI
Min
70
4500 K
80
90
70
4000 K
80
90
Typ
Minimum Luminous Flux
2-Step
3-Step
Group
Flux (lm)
@ 85 °C
Flux (lm)
@ 25 °C*
P4
1965
2164
P2
1830
2015
N4
1710
1883
N4
1710
1883
N2
1590
1751
M4
1485
1635
XHP70D-00-00000D0HM445G
M4
1485
1635
XHP70D-00-00000D0UM445G
M2
1380
1520
K4
1290
1420
P4
1965
2164
P2
1830
2015
N4
1710
1883
N4
1710
1883
N2
1590
1751
M4
1485
1635
XHP70D-00-00000D0HM440H
XHP70D-00-00000D0HM440G
M4
1485
1635
XHP70D-00-00000D0UM440H
XHP70D-00-00000D0UM440G
M2
1380
1520
K4
1290
1420
Group
Order Code
Group
Order Code
5-Step
Group
Order Code
XHP70D-00-00000D0BP445E
45E
XHP70D-00-00000D0BP245E
XHP70D-00-00000D0BN445E
XHP70D-00-00000D0HN445G
45G
45G
XHP70D-00-00000D0HN245G
XHP70D-00-00000D0UM245G
XHP70D-00-00000D0UK445G
XHP70D-00-00000D0BP440E
40E
XHP70D-00-00000D0BP240E
XHP70D-00-00000D0BN440E
XHP70D-00-00000D0HN440H
40H
40H
XHP70D-00-00000D0HN240H
XHP70D-00-00000D0UM240H
XHP70D-00-00000D0UK440H
XHP70D-00-00000D0HN440G
40G
40G
XHP70D-00-00000D0HN240G
XHP70D-00-00000D0UM240G
XHP70D-00-00000D0UK440G
Notes
•
Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on
CRI measurements. See the Measurements section (page 32).
•
XLamp XHP70.3 LED order codes specify only a minimum flux bin and not a maximum. Cree LED may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.
•
Flux values @ 25 °C are calculated and for reference only.
© 2021-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, and the Cree
LED logo are registered trademarks Cree LED. UL® and the UL logo are registered trademarks of UL LLC.
CLD-DS266
REV 6
5
XLAMP ® XHP70.3 LED
FLUX CHARACTERISTICS, HIGH DENSITY EASYWHITE® ORDER CODES AND BINS - CONTINUED
Nominal
CCT
CRI
Min
70
3500 K
80
90
70
3000 K
Typ
Minimum Luminous Flux
Flux (lm)
@ 85 °C
Flux (lm)
@ 25 °C*
P2
1830
2015
N4
1710
1883
N2
1590
1751
N4
1710
1883
N2
1590
1751
M4
1485
1635
XHP70D-00-00000D0HM435H
XHP70D-00-00000D0HM435G
M4
1485
1635
XHP70D-00-00000D0UM435H
XHP70D-00-00000D0UM435G
M2
1380
1520
K4
1290
1420
P2
1830
2015
N4
1710
1883
N2
1590
1751
N2
1590
1751
M4
1485
1635
XHP70D-00-00000D0HM430H
M2
1380
1520
XHP70D-00-00000D0UM230H
K4
1290
1420
K2
1200
1321
M4
1485
1635
90
Group
Order Code
Group
Order Code
5-Step
Group
Order Code
XHP70D-00-00000D0BP235E
35E
XHP70D-00-00000D0BN435E
XHP70D-00-00000D0BN235E
XHP70D-00-00000D0HN435H
35H
35H
XHP70D-00-00000D0HN235H
XHP70D-00-00000D0UM235H
XHP70D-00-00000D0HN435G
35G
35G
XHP70D-00-00000D0UK435H
XHP70D-00-00000D0HN235G
XHP70D-00-00000D0UM235G
XHP70D-00-00000D0UK435G
XHP70D-00-00000D0BP230E
30E
XHP70D-00-00000D0BN430E
XHP70D-00-00000D0BN230E
30H
80
2700 K
3-Step
Group
80
90
2-Step
30H
XHP70D-00-00000D0HN230H
XHP70D-00-00000D0UK430H
30G
XHP70D-00-00000D0HM427H
M2
1380
1520
XHP70D-00-00000D0HM227H
K4
1290
1420
XHP70D-00-00000D0UK427H
K2
1200
1321
J4
1120
1233
27H
XHP70D-00-00000D0UK227H
XHP70D-00-00000D0UJ427H
XHP70D-00-00000D0HM430G
XHP70D-00-00000D0UM230G
30G
XHP70D-00-00000D0UK230H
27H
XHP70D-00-00000D0HN230G
XHP70D-00-00000D0UK430G
XHP70D-00-00000D0UK230G
27G
XHP70D-00-00000D0HM427G
XHP70D-00-00000D0HM227G
XHP70D-00-00000D0UK427G
27G
XHP70D-00-00000D0UK227G
XHP70D-00-00000D0UJ427G
Notes
•
Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on
CRI measurements. See the Measurements section (page 32).
•
XLamp XHP70.3 LED order codes specify only a minimum flux bin and not a maximum. Cree LED may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.
•
Flux values @ 25 °C are calculated and for reference only.
© 2021-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, and the Cree
LED logo are registered trademarks Cree LED. UL® and the UL logo are registered trademarks of UL LLC.
CLD-DS266
REV 6
6
XLAMP ® XHP70.3 LED
FLUX CHARACTERISTICS, HIGH DENSITY ANSI WHITE ORDER CODES AND BINS
The following table provides order codes for XLamp XHP70.3 High Density LEDs. For a complete description of how the flux and
chromaticity groups are reflected in the bin code and order code nomenclature, please see the Bin and Order Code Formats section (page
30).
Binning condition: TJ = 85 °C; 12 V, IF = 1050 mA
Reference condition: TJ = 85 °C; 6 V, IF = 2100 mA
Nominal
CCT
7000 K
CRI
Chromaticity Regions
0A, 0B, 0C, 0D,
0R, 0S, 0T, 0U,
1A, 1B, 1C, 1D,
1R, 1S, 1T, 1U
Minimum Luminous Flux
Group
P2
1830
2015
XHP70D-00-0000-0D00P20DT
0
68
N4
1710
1883
XHP70D-00-0000-0D00N40DT
N2
1590
1751
XHP70D-00-0000-0D00N20DT
P2
1830
2015
XHP70D-00-0000-0D0BP20DT
N4
1710
1883
XHP70D-00-0000-0D0BN40DT
N2
1590
1751
XHP70D-00-0000-0D0BN20DT
70
0
1A, 1B, 1C, 1D
68
70
80
0
6000 K
1A, 1B, 1C, 1D,
1R, 1S, 1T, 1U,
2A, 2B, 2C, 2D,
2R, 2S, 2T, 2U
Order Code
Typ
80
6500 K
Flux (lm) Flux (lm)
@ 85 °C @ 25 °C*
Min
70
80
90
68
N2
1590
1751
XHP70D-00-0000-0D0HN20DT
M4
1485
1635
XHP70D-00-0000-0D0HM40DT
P2
1830
2015
XHP70D-00-0000-0D00P20E1
N4
1710
1883
XHP70D-00-0000-0D00N40E1
N2
1590
1751
XHP70D-00-0000-0D00N20E1
P2
1830
2015
XHP70D-00-0000-0D0BP20E1
N4
1710
1883
XHP70D-00-0000-0D0BN40E1
N2
1590
1751
XHP70D-00-0000-0D0BN20E1
N2
1590
1751
XHP70D-00-0000-0D0HN20E1
M4
1485
1635
XHP70D-00-0000-0D0HM40E1
P2
1830
2015
XHP70D-00-0000-0D00P20DV
N4
1710
1883
XHP70D-00-0000-0D00N40DV
P2
1830
2015
XHP70D-00-0000-0D0BP20DV
N4
1710
1883
XHP70D-00-0000-0D0BN40DV
N2
1590
1751
XHP70D-00-0000-0D0HN20DV
M4
1485
1635
XHP70D-00-0000-0D0HM40DV
M4
1485
1635
XHP70D-00-0000-0D0UM40DV
M2
1380
1520
XHP70D-00-0000-0D0UM20DV
Notes
•
Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on
CRI measurements. See the Measurements section (page 32).
•
XLamp XHP70.3 LED order codes specify only a minimum flux bin and not a maximum. Cree LED may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.
•
Flux values @ 25 °C are calculated and for reference only.
© 2021-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, and the Cree
LED logo are registered trademarks Cree LED. UL® and the UL logo are registered trademarks of UL LLC.
CLD-DS266
REV 6
7
XLAMP ® XHP70.3 LED
FLUX CHARACTERISTICS, HIGH DENSITY ANSI WHITE ORDER CODES AND BINS - CONTINUED
Nominal
CCT
CRI
Chromaticity Regions
Min
0
Minimum Luminous Flux
Typ
68
70
5700 K
2A, 2B, 2C, 2D
80
90
0
68
70
5000 K
3A, 3B, 3C, 3D
80
90
0
70
4500 K
4A, 4B, 4C, 4D
80
90
68
Group
Flux (lm) Flux (lm)
@ 85 °C @ 25 °C*
P4
1965
2164
Order Code
XHP70D-00-0000-0D00P40E2
P2
1830
2015
XHP70D-00-0000-0D00P20E2
N4
1710
1883
XHP70D-00-0000-0D00N40E2
P4
1965
2164
XHP70D-00-0000-0D0BP40E2
P2
1830
2015
XHP70D-00-0000-0D0BP20E2
N4
1710
1883
XHP70D-00-0000-0D0BN40E2
N4
1710
1883
XHP70D-00-0000-0D0HN40E2
N2
1590
1751
XHP70D-00-0000-0D0HN20E2
M4
1485
1635
XHP70D-00-0000-0D0HM40E2
N2
1590
1751
XHP70D-00-0000-0D0UN20E2
M4
1485
1635
XHP70D-00-0000-0D0UM40E2
M2
1380
1520
XHP70D-00-0000-0D0UM20E2
P4
1965
2164
XHP70D-00-0000-0D00P40E3
P2
1830
2015
XHP70D-00-0000-0D00P20E3
N4
1710
1883
XHP70D-00-0000-0D00N40E3
P4
1965
2164
XHP70D-00-0000-0D0BP40E3
P2
1830
2015
XHP70D-00-0000-0D0BP20E3
N4
1710
1883
XHP70D-00-0000-0D0BN40E3
P2
1830
2015
XHP70D-00-0000-0D0HP20E3
N4
1710
1883
XHP70D-00-0000-0D0HN40E3
N2
1590
1751
XHP70D-00-0000-0D0HN20E3
M4
1485
1635
XHP70D-00-0000-0D0HM40E3
N2
1590
1751
XHP70D-00-0000-0D0UN20E3
M4
1485
1635
XHP70D-00-0000-0D0UM40E3
M2
1380
1520
XHP70D-00-0000-0D0UM20E3
P4
1965
2164
XHP70D-00-0000-0D00P40E4
P2
1830
2015
XHP70D-00-0000-0D00P20E4
N4
1710
1883
XHP70D-00-0000-0D00N40E4
P4
1965
2164
XHP70D-00-0000-0D0BP40E4
P2
1830
2015
XHP70D-00-0000-0D0BP20E4
N4
1710
1883
XHP70D-00-0000-0D0BN40E4
N4
1710
1883
XHP70D-00-0000-0D0HN40E4
N2
1590
1751
XHP70D-00-0000-0D0HN20E4
M4
1485
1635
XHP70D-00-0000-0D0HM40E4
M4
1485
1635
XHP70D-00-0000-0D0UM40E4
M2
1380
1520
XHP70D-00-0000-0D0UM20E4
K4
1290
1420
XHP70D-00-0000-0D0UK40E4
Notes
•
Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on
CRI measurements. See the Measurements section (page 32).
•
XLamp XHP70.3 LED order codes specify only a minimum flux bin and not a maximum. Cree LED may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.
•
Flux values @ 25 °C are calculated and for reference only.
© 2021-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, and the Cree
LED logo are registered trademarks Cree LED. UL® and the UL logo are registered trademarks of UL LLC.
CLD-DS266
REV 6
8
XLAMP ® XHP70.3 LED
FLUX CHARACTERISTICS, HIGH DENSITY ANSI WHITE ORDER CODES AND BINS - CONTINUED
Nominal
CCT
CRI
Chromaticity Regions
Min
Typ
0
68
70
4000 K
5A, 5B, 5C, 5D
80
90
3500 K
3000 K
6A, 6B, 6C, 6D
7A, 7B, 7C, 7D
Minimum Luminous Flux
70
70
Group
Flux (lm) Flux (lm)
@ 85 °C @ 25 °C*
Order Code
P2
1830
2015
XHP70D-00-0000-0D00N20E5
N4
1710
1883
XHP70D-00-0000-0D00N40E5
P4
1965
2164
XHP70D-00-0000-0D0BP40E5
P2
1830
2015
XHP70D-00-0000-0D0BP20E5
N4
1710
1883
XHP70D-00-0000-0D0BN40E5
N4
1710
1883
XHP70D-00-0000-0D0HN40E5
N2
1590
1751
XHP70D-00-0000-0D0HN20E5
M4
1485
1635
XHP70D-00-0000-0D0HM40E5
M4
1485
1635
XHP70D-00-0000-0D0UM40E5
M2
1380
1520
XHP70D-00-0000-0D0UM20E5
XHP70D-00-0000-0D0UK40E5
K4
1290
1420
P2
1830
2015
XHP70D-00-0000-0D0BP20E6
N4
1710
1883
XHP70D-00-0000-0D0BN40E6
N2
1590
1751
XHP70D-00-0000-0D0BN20E6
N4
1710
1883
XHP70D-00-0000-0D0BN40E7
N2
1590
1751
XHP70D-00-0000-0D0BN20E7
Notes
•
Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on
CRI measurements. See the Measurements section (page 32).
•
XLamp XHP70.3 LED order codes specify only a minimum flux bin and not a maximum. Cree LED may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.
•
Flux values @ 25 °C are calculated and for reference only.
© 2021-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, and the Cree
LED logo are registered trademarks Cree LED. UL® and the UL logo are registered trademarks of UL LLC.
CLD-DS266
REV 6
9
XLAMP ® XHP70.3 LED
FLUX CHARACTERISTICS, HIGH DENSITY BROADCAST ORDER CODES AND BINS
The following table provides order codes for XLamp XHP70.3 High Density Broadcast LEDs. For a complete description of how the flux
and chromaticity groups are reflected in the bin code and order code nomenclature, please see the Bin and Order Code Formats section
(page 30).
Binning condition: TJ = 85 °C; 12 V, IF = 1050 mA
Reference condition: TJ = 85 °C; 6 V, IF = 2100 mA
Chromaticity
Kit
CCT
E2
5700 K
Minimum Luminous Flux (lm)
@ 1050 mA
Order Codes
Flux Bin
Flux (lm)
@ 85 °C
Flux (lm)
@ 25 °C*
90 CRI Minimum
90 TLCI Minimum
M2
1380
1520
XHP70D-00-B001-AD0UM20E2
K4
1290
1420
95 CRI Minimum
95 TLCI Minimum
XHP70D-00-B001-AD0ZK40E2
Notes
•
•
•
•
TLCI refers to the European Broadcast Union’s Television Lighting Consistency Index 2012, which aids broadcasters in assessing the
colorimetric quality of lighting in their production environment. Cree LED maintains a tolerance of ±2 on TLCI measurements. See the Measurements
section (page 32).
Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on
CRI measurements. See the Measurements section (page 32).
XLamp XHP70.3 LED order codes specify only a minimum flux bin and not a maximum. Cree LED may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.
Flux values @ 25 °C are calculated and for reference only.
© 2021-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, and the Cree
LED logo are registered trademarks Cree LED. UL® and the UL logo are registered trademarks of UL LLC.
CLD-DS266
REV 6
10
XLAMP ® XHP70.3 LED
FLUX CHARACTERISTICS, HIGH INTENSITY EASYWHITE® ORDER CODES AND BINS
The following table provides order codes for XLamp XHP70.3 High Intensity LEDs. For a complete description of how the flux and
chromaticity groups are reflected in the bin code and order code nomenclature, please see the Bin and Order Code Formats section (page
30).
Binning condition: TJ = 85 °C; 12 V, IF = 1050 mA
Reference condition: TJ = 85 °C; 6 V, IF = 2100 mA
Nominal
CCT
CRI
Min
Typ
Minimum Luminous Flux
Group
Flux (lm)
@ 85 °C
Flux (lm)
@ 25 °C*
P2
1830
2015
N4
1710
1883
N2
1590
1751
2-Step
Group
Order Code
3-Step
Group
Order Code
70
5000 K
Group
50E
80
50G
1485
1635
XHP70D-H0-00000D0HM450G
M4
1485
1635
XHP70D-H0-00000D0UM450G
M2
1380
1520
P2
1830
2015
50G
45E
1710
1883
N2
1590
1751
M4
1485
1635
M2
1380
1520
80
45G
90
45G
K4
1290
1420
XHP70D-H0-00000D0BP250E
XHP70D-H0-00000D0BN450E
XHP70D-H0-00000D0UM250G
70
N4
Order Code
XHP70D-H0-00000D0HN250G
M4
90
4500 K
5-Step
XHP70D-H0-00000D0BP245E
XHP70D-H0-00000D0BN445E
XHP70D-H0-00000D0HN245G
XHP70D-H0-00000D0HM445G
XHP70D-H0-00000D0UM245G
XHP70D-H0-00000D0UK445G
Notes
•
Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on
CRI measurements. See the Measurements section (page 32).
•
XLamp XHP70.3 LED order codes specify only a minimum flux bin and not a maximum. Cree LED may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.
•
Flux values @ 25 °C are calculated and for reference only.
© 2021-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, and the Cree
LED logo are registered trademarks Cree LED. UL® and the UL logo are registered trademarks of UL LLC.
CLD-DS266
REV 6
11
XLAMP ® XHP70.3 LED
FLUX CHARACTERISTICS, HIGH INTENSITY EASYWHITE® ORDER CODES AND BINS - CONTINUED
Nominal
CCT
CRI
Min
Typ
Minimum Luminous Flux
Group
Flux (lm)
@ 85 °C
Flux (lm)
@ 25 °C*
P2
1830
2015
N4
1710
1883
N2
1590
1751
2-Step
Group
Order Code
3-Step
Group
Order Code
70
40H
XHP70D-H0-00000D0HN240H
40G
1485
1635
XHP70D-H0-00000D0HM440H
M2
1380
1520
XHP70D-H0-00000D0UM240H
K4
1290
1420
XHP70D-H0-00000D0UK440H
K4
1290
1420
XHP70D-H0-00000D0ZK440H
K2
1200
1321
J4
1120
1233
N4
1710
1883
N2
1590
1751
N2
1590
1751
M4
1485
1635
XHP70D-H0-00000D0HM435H
K4
1290
1420
XHP70D-H0-00000D0UK435H
K2
1200
1321
XHP70D-H0-00000D0UK235H
K2
1200
1321
XHP70D-H0-00000D0ZK235H
XHP70D-H0-00000D0ZK235G
J4
1120
1233
XHP70D-H0-00000D0ZJ435H
XHP70D-H0-00000D0ZJ435G
J2
1040
1145
XHP70D-H0-00000D0ZJ235H
H4
970
1068
XHP70D-H0-00000D0ZH435H
40H
40H
XHP70D-H0-00000D0ZK240H
40G
XHP70D-H0-00000D0UM240G
XHP70D-H0-00000D0UK440G
40G
XHP70D-H0-00000D0ZK240G
XHP70D-H0-00000D0ZJ440G
35E
3500 K
35H
90
35H
95
35H
XHP70D-H0-00000D0BN440E
XHP70D-H0-00000D0HM440G
70
80
XHP70D-H0-00000D0BP240E
XHP70D-H0-00000D0ZK440G
XHP70D-H0-00000D0ZJ440H
XHP70D-H0-00000D0HN235H
Order Code
XHP70D-H0-00000D0HN240G
M4
90
95
Group
40E
80
4000 K
5-Step
35G
35G
35G
XHP70D-H0-00000D0BN435E
XHP70D-H0-00000D0BN235E
XHP70D-H0-00000D0HN235G
XHP70D-H0-00000D0HM435G
XHP70D-H0-00000D0UK435G
XHP70D-H0-00000D0UK235G
XHP70D-H0-00000D0ZJ235G
XHP70D-H0-00000D0ZH435G
Notes
•
Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on
CRI measurements. See the Measurements section (page 32).
•
XLamp XHP70.3 LED order codes specify only a minimum flux bin and not a maximum. Cree LED may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.
•
Flux values @ 25 °C are calculated and for reference only.
© 2021-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, and the Cree
LED logo are registered trademarks Cree LED. UL® and the UL logo are registered trademarks of UL LLC.
CLD-DS266
REV 6
12
XLAMP ® XHP70.3 LED
FLUX CHARACTERISTICS, HIGH INTENSITY EASYWHITE® ORDER CODES AND BINS - CONTINUED
Nominal
CCT
CRI
Min
Typ
Minimum Luminous Flux
Group
Flux (lm)
@ 85 °C
Flux (lm)
@ 25 °C*
N4
1710
1883
N2
1590
1751
N2
1590
1751
2-Step
Group
Order Code
3-Step
Group
Order Code
70
Group
30E
80
3000 K
5-Step
30H
XHP70D-H0-00000D0HN230H
30G
1485
1635
XHP70D-H0-00000D0HM430H
K4
1290
1420
XHP70D-H0-00000D0UK430H
K2
1200
1321
XHP70D-H0-00000D0UK230H
K2
1200
1321
XHP70D-H0-00000D0ZK230H
XHP70D-H0-00000D0ZK230G
J4
1120
1233
XHP70D-H0-00000D0ZJ430H
XHP70D-H0-00000D0ZJ430G
J2
1040
1145
XHP70D-H0-00000D0ZJ230H
H4
970
1068
XHP70D-H0-00000D0ZH430H
M4
1485
1635
30H
95
30H
80
27H
XHP70D-H0-00000D0HM427H
30G
30G
XHP70D-H0-00000D0UK430G
XHP70D-H0-00000D0UK230G
XHP70D-H0-00000D0ZJ230G
XHP70D-H0-00000D0ZH430G
27G
XHP70D-H0-00000D0HM427G
1380
1520
XHP70D-H0-00000D0HM227H
K2
1200
1321
XHP70D-H0-00000D0UK227H
J4
1120
1233
XHP70D-H0-00000D0UJ427H
J4
1120
1233
XHP70D-H0-00000D0ZJ427H
XHP70D-H0-00000D0ZJ427G
J2
1040
1145
XHP70D-H0-00000D0ZJ227H
XHP70D-H0-00000D0ZJ227G
H4
970
1068
XHP70D-H0-00000D0ZH427H
H2
900
991
XHP70D-H0-00000D0ZH227H
27H
2700 K
95
27H
XHP70D-H0-00000D0BN230E
XHP70D-H0-00000D0HM430G
M2
90
XHP70D-H0-00000D0BN430E
XHP70D-H0-00000D0HN230G
M4
90
Order Code
27G
27G
XHP70D-H0-00000D0HM227G
XHP70D-H0-00000D0UK227G
XHP70D-H0-00000D0UJ427G
XHP70D-H0-00000D0ZH427G
XHP70D-H0-00000D0ZH227G
Notes
•
Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on
CRI measurements. See the Measurements section (page 32).
•
XLamp XHP70.3 LED order codes specify only a minimum flux bin and not a maximum. Cree LED may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.
•
Flux values @ 25 °C are calculated and for reference only.
© 2021-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, and the Cree
LED logo are registered trademarks Cree LED. UL® and the UL logo are registered trademarks of UL LLC.
CLD-DS266
REV 6
13
XLAMP ® XHP70.3 LED
FLUX CHARACTERISTICS, HIGH INTENSITY ANSI WHITE ORDER CODES AND BINS
The following table provides order codes for XLamp XHP70.3 High Intensity LEDs. For a complete description of how the flux and
chromaticity groups are reflected in the bin code and order code nomenclature, please see the Bin and Order Code Formats section (page
30).
Binning condition: TJ = 85 °C; 12 V, IF = 1050 mA
Reference condition: TJ = 85 °C; 6 V, IF = 2100 mA
Nominal
CCT
7000 K
CRI
Chromaticity Regions
0A, 0B, 0C, 0D,
0R, 0S, 0T, 0U,
1A, 1B, 1C, 1D,
1R, 1S, 1T, 1U
Minimum Luminous Flux
Group
P2
1830
2015
XHP70D-H0-0000-0D00P20DT
0
68
N4
1710
1883
XHP70D-H0-0000-0D00N40DT
N2
1590
1751
XHP70D-H0-0000-0D00N20DT
P2
1830
2015
XHP70D-H0-0000-0D0BP20DT
N4
1710
1883
XHP70D-H0-0000-0D0BN40DT
N2
1590
1751
XHP70D-H0-0000-0D0BN20DT
70
0
1A, 1B, 1C, 1D
68
70
80
0
6000 K
1A, 1B, 1C, 1D,
1R, 1S, 1T, 1U,
2A, 2B, 2C, 2D,
2R, 2S, 2T, 2U
Order Code
Typ
80
6500 K
Flux (lm) Flux (lm)
@ 85 °C @ 25 °C*
Min
70
80
90
68
N2
1590
1751
XHP70D-H0-0000-0D0HN20DT
M4
1485
1635
XHP70D-H0-0000-0D0HM40DT
P2
1830
2015
XHP70D-H0-0000-0D00P20E1
N4
1710
1883
XHP70D-H0-0000-0D00N40E1
N2
1590
1751
XHP70D-H0-0000-0D00N20E1
N4
1710
1883
XHP70D-H0-0000-0D0BN40E1
N2
1590
1751
XHP70D-H0-0000-0D0BN20E1
N2
1590
1751
XHP70D-H0-0000-0D0HN20E1
M4
1485
1635
XHP70D-H0-0000-0D0HM40E1
P2
1830
2015
XHP70D-H0-0000-0D00P20DV
N4
1710
1883
XHP70D-H0-0000-0D00N40DV
P2
1830
2015
XHP70D-H0-0000-0D0BP20DV
N4
1710
1883
XHP70D-H0-0000-0D0BN40DV
N2
1590
1751
XHP70D-H0-0000-0D0HN20DV
M4
1485
1635
XHP70D-H0-0000-0D0HM40DV
M4
1485
1635
XHP70D-H0-0000-0D0UM40DV
M2
1380
1520
XHP70D-H0-0000-0D0UM20DV
Notes
•
Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on
CRI measurements. See the Measurements section (page 32).
•
XLamp XHP70.3 LED order codes specify only a minimum flux bin and not a maximum. Cree LED may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.
•
Flux values @ 25 °C are calculated and for reference only.
© 2021-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, and the Cree
LED logo are registered trademarks Cree LED. UL® and the UL logo are registered trademarks of UL LLC.
CLD-DS266
REV 6
14
XLAMP ® XHP70.3 LED
FLUX CHARACTERISTICS, HIGH INTENSITY ANSI WHITE ORDER CODES AND BINS - CONTINUED
Nominal
CCT
CRI
Chromaticity Regions
Minimum Luminous Flux
Min
Typ
0
68
70
5700 K
2A, 2B, 2C, 2D
80
90
0
68
70
5000 K
3A, 3B, 3C, 3D
80
90
0
68
70
4500 K
4A, 4B, 4C, 4D
80
90
0
70
4000 K
5A, 5B, 5C, 5D
80
90
3500 K
3000 K
6A, 6B, 6C, 6D
7A, 7B, 7C, 7D
70
70
68
Group
Flux (lm) Flux (lm)
@ 85 °C @ 25 °C*
Order Code
P2
1830
2015
XHP70D-H0-0000-0D00P20E2
N4
1710
1883
XHP70D-H0-0000-0D00N40E2
P2
1830
2015
XHP70D-H0-0000-0D0BP20E2
N4
1710
1883
XHP70D-H0-0000-0D0BN40E2
N2
1590
1751
XHP70D-H0-0000-0D0HN20E2
M4
1485
1635
XHP70D-H0-0000-0D0HM40E2
M4
1485
1635
XHP70D-H0-0000-0D0UM40E2
M2
1380
1520
XHP70D-H0-0000-0D0UM20E2
P2
1830
2015
XHP70D-H0-0000-0D00P20E3
N4
1710
1883
XHP70D-H0-0000-0D00N40E3
P2
1830
2015
XHP70D-H0-0000-0D0BP20E3
N4
1710
1883
XHP70D-H0-0000-0D0BN40E3
N2
1590
1751
XHP70D-H0-0000-0D0HN20E3
M4
1485
1635
XHP70D-H0-0000-0D0HM40E3
M4
1485
1635
XHP70D-H0-0000-0D0UM40E3
M2
1380
1520
XHP70D-H0-0000-0D0UM20E3
P2
1830
2015
XHP70D-H0-0000-0D00P20E4
N4
1710
1883
XHP70D-H0-0000-0D00N40E4
P2
1830
2015
XHP70D-H0-0000-0D0BP20E4
N4
1710
1883
XHP70D-H0-0000-0D0BN40E4
N2
1590
1751
XHP70D-H0-0000-0D0HN20E4
M4
1485
1635
XHP70D-H0-0000-0D0HM40E4
M2
1380
1520
XHP70D-H0-0000-0D0UM20E4
K4
1290
1420
XHP70D-H0-0000-0D0UK40E4
P2
1830
2015
XHP70D-H0-0000-0D00N20E5
N4
1710
1883
XHP70D-H0-0000-0D00N40E5
P2
1830
2015
XHP70D-H0-0000-0D0BP20E5
N4
1710
1883
XHP70D-H0-0000-0D0BN40E5
N2
1590
1751
XHP70D-H0-0000-0D0HN20E5
M4
1485
1635
XHP70D-H0-0000-0D0HM40E5
M2
1380
1520
XHP70D-H0-0000-0D0UM20E5
K4
1290
1420
XHP70D-H0-0000-0D0UK40E5
N4
1710
1883
XHP70D-H0-0000-0D0BN40E6
N2
1590
1751
XHP70D-H0-0000-0D0BN20E6
N4
1710
1883
XHP70D-H0-0000-0D0BN40E7
N2
1590
1751
XHP70D-H0-0000-0D0BN20E7
Notes
•
Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on
CRI measurements. See the Measurements section (page 32).
•
XLamp XHP70.3 LED order codes specify only a minimum flux bin and not a maximum. Cree LED may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.
•
Flux values @ 25 °C are calculated and for reference only.
© 2021-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, and the Cree
LED logo are registered trademarks Cree LED. UL® and the UL logo are registered trademarks of UL LLC.
CLD-DS266
REV 6
15
XLAMP ® XHP70.3 LED
FLUX CHARACTERISTICS, HIGH INTENSITY BROADCAST ORDER CODES AND BINS
The following table provides order codes for XLamp XHP70.3 High Intensity Broadcast LEDs. For a complete description of how the flux
and chromaticity groups are reflected in the bin code and order code nomenclature, please see the Bin and Order Code Formats section
(page 30).
Binning condition: TJ = 85 °C; 12 V, IF = 1050 mA
Reference condition: TJ = 85 °C; 6 V, IF = 2100 mA
Chromaticity
Kit
CCT
E2
5700 K
Minimum Luminous Flux (lm)
@ 1050 mA
Order Codes
Flux Bin
Flux (lm)
@ 85 °C
Flux (lm)
@ 25 °C*
90 CRI Minimum
90 TLCI Minimum
K4
1290
1420
XHP70D-H0-B001-AD0UK40E2
K2
1200
1321
95 CRI Minimum
95 TLCI Minimum
XHP70D-H0-B001-AD0ZK20E2
Notes
•
•
•
•
TLCI refers to the European Broadcast Union’s Television Lighting Consistency Index 2012, which aids broadcasters in assessing the
colorimetric quality of lighting in their production environment. Cree LED maintains a tolerance of ±2 on TLCI measurements. See the Measurements
section (page 32).
Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on
CRI measurements. See the Measurements section (page 32).
XLamp XHP70.3 LED order codes specify only a minimum flux bin and not a maximum. Cree LED may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.
Flux values @ 25 °C are calculated and for reference only.
© 2021-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, and the Cree
LED logo are registered trademarks Cree LED. UL® and the UL logo are registered trademarks of UL LLC.
CLD-DS266
REV 6
16
XLAMP ® XHP70.3 LED
Relative Spectral Power
RELATIVE SPECTRAL POWER DISTRIBUTION
100%
Relative Radiant Power
80%
60%
6500 K, 68 CRI
3000 K, 80 CRI
40%
20%
0%
380
430
480
530
580
630
680
730
780
Wavelength (nm)
RELATIVE FLUX VS. JUNCTION TEMPERATURE
Relative Flux Output vs. Junction Temperature
Reference condition: 6 V, IF = 2100 mA; 12 V, IF = 1050 mA
120%
Relative Luminous Flux
100%
80%
60%
40%
20%
0%
25
50
75
100
125
150
Junction Temperature (ºC)
© 2021-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, and the Cree
LED logo are registered trademarks Cree LED. UL® and the UL logo are registered trademarks of UL LLC.
CLD-DS266
REV 6
17
XLAMP ® XHP70.3 LED
ELECTRICAL CHARACTERISTICS (TJ = 85 °C)
7200
6400
Forward Current (mA)
5600
4800
4000
6V
3200
2400
1600
800
0
5.00
5.25
Electrical Characteristics
(Tj = 85°C)
5.50
5.75
6.00
6.25
Forward Voltage (V)
3600
3200
Forward Current (mA)
2800
2400
2000
12 V
1600
1200
800
400
0
10.0
10.5
11.0
11.5
12.0
12.5
Forward Voltage (V)
© 2021-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, and the Cree
LED logo are registered trademarks Cree LED. UL® and the UL logo are registered trademarks of UL LLC.
CLD-DS266
REV 6
18
XLAMP ® XHP70.3 LED
RELATIVE FLUX VS. CURRENT (TJ = 85 °C)
300%
Relative Luminous Flux
250%
200%
150%
6V
100%
50%
0%
Relative Intensity vs. Current
(Tj = 85°C)
Forward Current (mA)
0
800
1600
2400
3200
4000
4800
5600
6400
7200
300%
Relative Luminous Flux
250%
200%
12 V
150%
100%
50%
0%
0
400
800
1200
1600
2000
2400
2800
3200
3600
Forward Current (mA)
© 2021-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, and the Cree
LED logo are registered trademarks Cree LED. UL® and the UL logo are registered trademarks of UL LLC.
CLD-DS266
REV 6
19
XLAMP ® XHP70.3 LED
Relative Chromaticity
Vs. Current,(WARM
WW - HD WHITE)
RELATIVE CHROMATICITY
VS CURRENT
0.020
0.016
0.012
6V
0.008
0.004
ΔCCx
0.000
ΔCCy
-0.004
-0.008
-0.012
-0.016
-0.020
0
800
1600
2400
Relative Chromaticity Vs. Current, WW - HD
3200
4000
4800
5600
6400
7200
Current (mA)
0.020
0.016
0.012
12 V
0.008
0.004
ΔCCx
0.000
ΔCCy
-0.004
-0.008
-0.012
-0.016
-0.020
0
400
800
1200
1600
2000
2400
2800
3200
3600
Current (mA)
© 2021-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, and the Cree
LED logo are registered trademarks Cree LED. UL® and the UL logo are registered trademarks of UL LLC.
CLD-DS266
REV 6
20
XLAMP ® XHP70.3 LED
RELATIVE CHROMATICITY VS TEMPERATURE (WARM WHITE)
Relative Chromaticity Vs. Temperature WW
Reference condition: 6 V, IF = 2100 mA; 12 V, IF = 1050 mA
0.020
0.016
0.012
0.008
0.004
ΔCCx
0.000
ΔCCy
-0.004
-0.008
-0.012
-0.016
-0.020
25
50
75
100
125
150
Tj (°C)
TYPICAL SPATIAL DISTRIBUTION
Typical Spatial Radiation Pattern
Reference condition: TJ = 85 °C; 6 V, IF = 2100 mA; 12 V, IF = 1050 mA
100%
Relative Luminous Intensity
80%
60%
HD
HI
40%
20%
-90
-70
-50
-30
-10
0%
10
30
50
70
90
Angle (º)
© 2021-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, and the Cree
LED logo are registered trademarks Cree LED. UL® and the UL logo are registered trademarks of UL LLC.
CLD-DS266
REV 6
21
XLAMP ® XHP70.3 LED
THERMAL DESIGN
The maximum forward current is determined by the thermal resistance between the LED junction and ambient. It is crucial for the end
product to be designed in a manner that minimizes the thermal resistance from the solder point to ambient in order to optimize lamp life
and optical characteristics.
7500
7000
Maximum Current (mA)
6500
6000
5500
5000
4500
4000
6V
3500
3000
2500
Rj-a = 0.5°C/W
2000
Rj-a = 1°C/W
1500
Rj-a = 2°C/W
1000
Rj-a = 3°C/W
500
0
0
20
Thermal Design
40
60
80
100
120
140
160
Ambient Temperature (ºC)
3750
3500
Maximum Current (mA)
3250
3000
2750
2500
2250
2000
12 V
1750
1500
1250
Rj-a = 0.5°C/W
1000
Rj-a = 1°C/W
750
Rj-a = 2°C/W
500
Rj-a = 3°C/W
250
0
0
20
40
60
80
100
120
140
160
Ambient Temperature (ºC)
© 2021-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, and the Cree
LED logo are registered trademarks Cree LED. UL® and the UL logo are registered trademarks of UL LLC.
CLD-DS266
REV 6
22
XLAMP ® XHP70.3 LED
PERFORMANCE GROUPS - LUMINOUS FLUX (TJ = 85 °C)
XLamp XHP70.3 LEDs are tested for luminous flux and placed into one of the following luminous-flux groups.
Group Code
Minimum Luminous Flux
Maximum Luminous Flux
H2
900
970
H4
970
1040
J2
1040
1120
J4
1120
1200
K2
1200
1290
K4
1290
1380
M2
1380
1485
M4
1485
1590
N2
1590
1710
N4
1710
1830
P2
1830
1965
P4
1965
2100
Q2
2100
2260
PERFORMANCE GROUPS - CHROMATICITY
XLamp XHP70.3 LEDs are tested for chromaticity and placed into one of the regions defined by the following bounding coordinates.
EasyWhite Color Temperatures – 2-Step
Code
40H
35H
30H
27H
CCT
4000 K
3500 K
3000 K
2700 K
x
y
0.3777
0.3739
0.3797
0.3816
0.3861
0.3855
0.3838
0.3777
0.4022
0.3858
0.4053
0.3942
0.4125
0.3977
0.4091
0.3891
0.4287
0.3975
0.4328
0.4064
0.4390
0.4086
0.4347
0.3996
0.4524
0.4048
0.4574
0.4140
0.4633
0.4154
0.4581
0.4062
© 2021-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, and the Cree
LED logo are registered trademarks Cree LED. UL® and the UL logo are registered trademarks of UL LLC.
CLD-DS266
REV 6
23
XLAMP ® XHP70.3 LED
PERFORMANCE GROUPS - CHROMATICITY (CONTINUED)
EasyWhite Color Temperatures – 3-Step Ellipse
Bin Code
CCT
50G
Center Point
Major Axis
Minor Axis
Rotation Angle
(°)
x
y
a
b
5000 K
0.3447
0.3553
0.00840
0.00312
65.0
45G
4500 K
0.3611
0.3658
0.00852
0.00330
61.5
40G
4000 K
0.3818
0.3797
0.00939
0.00402
53.7
35G
3500 K
0.4073
0.3917
0.00927
0.00414
54.0
30G
3000 K
0.4338
0.4030
0.00834
0.00408
53.2
27G
2700 K
0.4577
0.4099
0.00834
0.00420
48.5
EasyWhite Color Temperatures – 5-Step Ellipse
Bin Code
CCT
50E
Center Point
Minor Axis
Rotation Angle
(°)
x
y
a
b
5000 K
0.3447
0.3553
0.01400
0.00520
65.0
45E
4500 K
0.3611
0.3658
0.01420
0.00550
61.5
40E
4000 K
0.3818
0.3797
0.01565
0.00670
53.7
35E
3500 K
0.4073
0.3917
0.01545
0.00690
54.0
30E
3000 K
0.4338
0.4030
0.01390
0.00680
53.2
ANSI White Bins
CCT
Major Axis
Bin Code
0A0
0B0
7000 K
0C0
0D0
ANSI White Bins
x
y
0.2950
0.2920
0.2984
0.3133
0.3009
0.3042
0.2920
0.2895
0.2962
0.3220
0.2984
0.3133
0.2984
0.3133
0.2962
0.3220
0.3028
0.3304
0.3048
0.3207
0.2984
0.3048
0.3068
0.3113
0.3009
0.3042
CCT
Bin Code
ANSI White Bins
x
y
0.2970
0.2980
0.3060
0.2950
0.3009
0.3042
0.3037
0.2937
0.3060
0.2895
0.3135
0.2870
0.2937
0.3312
0.2962
0.3220
0.2962
0.3220
0.2937
0.3312
0.3005
0.3415
0.3028
0.3304
0.3133
0.3037
0.3207
0.3009
0.3068
0.3113
0.3093
0.2993
0R0
0S0
7000 K
0T0
0U0
CCT
Bin Code
x
y
0.2880
0.3048
0.3207
0.2970
0.3130
0.3290
0.3144
0.3186
0.3068
0.3113
0.3135
0.3028
0.3304
0.3210
0.3115
0.3391
0.3130
0.3290
0.3048
0.3207
0.3115
0.3391
0.3205
0.3481
0.3213
0.3373
0.3130
0.3290
0.2937
0.3130
0.3290
0.3042
0.3213
0.3373
0.3221
0.3261
0.3144
0.3186
1A0
1B0
7000 K
© 2021-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, and the Cree
LED logo are registered trademarks Cree LED. UL® and the UL logo are registered trademarks of UL LLC.
1C0
1D0
CLD-DS266
REV 6
24
XLAMP ® XHP70.3 LED
PERFORMANCE GROUPS - CHROMATICITY (CONTINUED)
ANSI White Bins
CCT
Bin Code
1R0
1S0
7000 K
1T0
1U0
ANSI White Bins
x
y
CCT
0.3068
0.3113
0.3144
0.3186
0.3161
0.3059
0.3093
0.3005
0.3099
0.3509
0.3115
0.3391
0.3028
0.3304
0.3099
0.3509
0.3196
0.3602
0.3205
0.3481
0.3115
0.3144
0.3221
0.3261
0.3231
0.3120
0.3161
0.3059
Bin Code
x
y
0.3215
0.3350
0.3290
0.3417
0.3290
0.3300
0.2993
0.3222
0.3415
0.3207
0.3290
0.3538
0.3290
0.3417
0.3215
0.3350
0.3290
0.3538
0.3376
0.3616
0.3371
0.3490
0.3391
0.3290
0.3186
0.3290
0.3371
0.3490
0.3366
0.3369
0.3290
0.3300
2A0
2B0
6000 K
2C0
2D0
ANSI White Bins
CCT
ANSI White Bins
Bin Code
3A0
3B0
5000 K
3C0
3D0
CCT
Bin Code
x
y
0.3222
0.3243
0.3290
0.3300
0.3290
0.3180
0.3243
0.3231
0.3120
0.3462
0.3196
0.3602
0.3290
0.3690
0.3290
0.3538
0.3207
0.3462
0.3290
0.3690
0.3381
0.3762
0.3376
0.3616
0.3417
0.3290
0.3538
0.3417
0.3290
0.3300
0.3366
0.3369
0.3361
0.3245
0.3290
0.3180
2R0
2S0
6000 K
2T0
2U0
ANSI White Bins
x
y
0.3371
0.3490
0.3451
0.3554
0.3440
0.3427
0.3366
0.3376
0.3463
0.3687
0.3451
0.3554
0.3371
0.3490
0.3463
0.3687
0.3551
0.3760
0.3533
0.3620
0.3451
0.3451
0.3533
0.3620
0.3515
0.3487
0.3440
0.3427
CCT
Bin Code
x
y
0.3530
0.3597
0.3615
0.3659
0.3512
0.3465
0.3369
0.3515
0.3487
0.3616
0.3548
0.3736
0.3641
0.3804
0.3530
0.3597
4A0
4B0
0.3533
0.362
0.3641
0.3804
0.3736
0.3874
0.3702
0.3722
0.3554
0.3615
0.3659
0.3554
0.3615
0.3659
0.3702
0.3722
0.3670
0.3578
0.3590
0.3521
4500 K
4C0
4D0
© 2021-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, and the Cree
LED logo are registered trademarks Cree LED. UL® and the UL logo are registered trademarks of UL LLC.
CLD-DS266
REV 6
25
XLAMP ® XHP70.3 LED
PERFORMANCE GROUPS - CHROMATICITY (CONTINUED)
ANSI White Bins
CCT
Bin Code
5A0
5B0
4000 K
5C0
5D0
ANSI White Bins
x
y
0.3670
0.3578
0.3702
0.3722
0.3825
0.3798
0.3783
0.3702
0.3736
0.3874
0.3869
0.3958
0.3825
0.3798
0.3825
0.3798
0.3869
0.3958
0.4006
0.4044
0.3950
0.3783
0.3825
0.3798
0.3950
0.3875
0.3898
0.3716
CCT
Bin Code
ANSI White Bins
x
y
0.3889
0.3690
0.3941
0.3848
0.4080
0.3916
0.3646
0.4017
0.3722
0.3]941
0.3996
0.4015
0.4146
0.4089
0.4080
0.3916
0.4080
0.3916
0.4146
0.4089
0.4299
0.4165
0.3875
0.4221
0.3646
0.4017
0.4080
0.3916
0.4221
0.3984
0.4147
0.3814
6A0
6B0
3500 K
6C0
6D0
CCT
Bin Code
x
y
0.4147
0.3814
0.4221
0.3984
0.4342
0.4028
0.3751
0.4259
0.3853
0.3848
0.4221
0.3984
0.4299
0.4165
0.4430
0.4212
0.4342
0.4028
0.4342
0.4028
0.4430
0.4212
0.4562
0.4260
0.3984
0.4465
0.4071
0.3751
0.4259
0.3853
0.4342
0.4028
0.4465
0.4071
0.4373
0.3893
7A0
7B0
3000 K
© 2021-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, and the Cree
LED logo are registered trademarks Cree LED. UL® and the UL logo are registered trademarks of UL LLC.
7C0
7D0
CLD-DS266
REV 6
26
XLAMP ® XHP70.3 LED
EASYWHITE® CHROMATICITY REGIONS PLOTTED ON THE 1931 CIE CURVE
0.44
ANSI C78.377 Quadrangle
0.43
EasyWhite 5-Step
EasyWhite 3-Step
0.42
3500 K
EasyWhite 2-Step
0.41
2700 K
3000 K
4000 K
0.40
4500 K
0.39
5000 K
0.38
CCy
0.37
5700 K
0.36
6500 K
0.35
0.34
8000 K
0.33
0.32
0.31
0.30
0.29
0.49
0.48
0.47
0.46
0.45
0.44
0.43
0.42
0.41
0.40
0.39
0.38
0.37
0.36
0.35
0.34
0.33
0.32
0.31
0.30
0.29
0.28
0.27
0.28
CCx
© 2021-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, and the Cree
LED logo are registered trademarks Cree LED. UL® and the UL logo are registered trademarks of UL LLC.
CLD-DS266
REV 6
27
XLAMP ® XHP70.3 LED
ANSI STANDARD COOL WHITE KITS PLOTTED ON ANSI STANDARD CHROMATICITY REGIONS
0.40
5000 K
0.39
0.38
5700 K
0.37
6500 K
2T
0.36
2S
DT
0.35
CCy
8000 K
2B
1S
0T
0.33
0C
0B
0.31
2D
1C
2A
1B
0S
0.32
2C
1T
0.34
1D
2U
1U
0D
0A
ANSI
C78.377A
2R
1A
1R
0U
0.30
0R
0.29
0.36
0.35
0.34
0.33
0.32
0.31
0.30
0.29
0.28
0.28
CCx
0.40
0.40
5000 K
0.39
0.38
DV
6500 K
0.36
0.36
2C
8000 K
0A
0R
1R
0U
CCx
0.36
0.35
0.34
0.28
0.36
0.35
0.34
0.33
0.32
0.28
0.31
0.28
0.30
ANSI
C78.377A
2R
1U
0R
0.29
0.29
2U
1A
0D
0.30
0.29
0.28
0C
0B
0.31
1R
0U
0.30
0S
0.32
1D
0.33
0A
CCy
1U
3R
2A
1B
0.32
0.31
ANSI
C78.377A
2R
1A
0D
0T
0.33
2U
3A
2D
1C
0.31
0C
0B
1D
2C
2B
1S
0.30
0S
0.32
2A
1B
3B
2S
1T
8000 K
0.34
0.29
0T
0.33
2D
1C
2T
E1
0.35
2B
1S
3S
6500 K
2T
1T
0.34
5700 K
0.37
2S
0.35
CCy
0.38
5700 K
0.37
5000 K
0.39
CCx
0.40
5000 K
0.39
0.38
5700 K
E2
0.37
6500 K
0.36
3B
2S
0.35
CCy
3S
2T
2C
1T
8000 K
0.34
0T
0.33
0S
0.32
0C
0A
3R
2A
2U
1D
ANSI
C78.377A
2R
1A
0D
2D
1C
1B
0B
0.31
3A
2B
1S
1U
1R
0U
0.30
0R
0.29
0.36
0.35
0.34
0.33
0.32
0.31
0.30
0.29
0.28
0.28
CCx
© 2021-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, and the Cree
LED logo are registered trademarks Cree LED. UL® and the UL logo are registered trademarks of UL LLC.
CLD-DS266
REV 6
28
XLAMP ® XHP70.3 LED
STANDARD WARM AND NEUTRAL WHITE KITS PLOTTED ON ANSI STANDARD CHROMATICITY REGIONS
0.45
0.44
2700 K
3000 K
0.43
E7
0.42
3500 K
4000 K
CCy
0.40
0.39
5000 K
0.38
E4
4B
3C
0.36
3B
3D
0.35
7B
6C
6B
7D
7A
5C
6D
5B
4C
E3
0.37
E5
4500 K
7C
E6
0.41
6A
ANSI
C78.377A
5D
5A
4D
4A
3A
0.34
0.50
0.49
0.48
0.47
0.46
0.45
0.44
0.43
0.42
0.41
0.40
0.39
0.38
0.37
0.36
0.35
0.34
0.33
0.32
0.33
CCx
© 2021-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, and the Cree
LED logo are registered trademarks Cree LED. UL® and the UL logo are registered trademarks of UL LLC.
CLD-DS266
REV 6
29
XLAMP ® XHP70.3 LED
BIN AND ORDER-CODE FORMAT
Bin codes and order codes for XHP70.3 LEDs are configured in the following manner:
Order Code
Bin Code
Series
XHP70D = XHP70.3
Series
XHP70D = XHP70.3
Internal code
Chromaticity group
Minimum luminous flux group
Vf Class
D = 6-V/12-V configurable
Chromaticity group
CRI specification
0 = No minimum CRI
B = 70 CRI minimum
H = 80 CRI minimum
U = 90 CRI minimum
Z = 95 CRI minimum
SSSSSS-BD-GGGG-HJKLMMNNN
CRI specification
0 = No minimum CRI
B = 70 CRI minimum
H = 80 CRI minimum
U = 90 CRI minimum
Z = 95 CRI minimum
SSSSSS-E-NNN-MMM-JK-L-PP
Vf Class
D = 6-V/12-V configurable
Configuration
B = Version
0 = High density
H = High intensity
D = Reel size
© 2021-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, and the Cree
LED logo are registered trademarks Cree LED. UL® and the UL logo are registered trademarks of UL LLC.
Internal code
Voltage performance group
Luminous flux group
Version
0 = High density
H = High intensity
CLD-DS266
REV 6
30
XLAMP ® XHP70.3 LED
REFLOW SOLDERING CHARACTERISTICS
In testing, Cree LED has found XLamp XHP70.3 LEDs to be compatible with JEDEC J‑STD‑020C, using the parameters listed below. As a
general guideline, Cree LED recommends that users follow the recommended soldering profile provided by the manufacturer of the solder
paste used, and therefore it is the lamp or luminaire manufacturer’s responsibility to determine applicable soldering requirements.
Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment.
tP
TP
Critical Zone
TL to TP
Temperature
Ramp-up
TL
tL
Tsmax
Tsmin
Ramp-down
ts
Preheat
25
t 25˚C to Peak
Profile Feature
Average Ramp-Up Rate (Tsmax to Tp)
Time
Lead-Free Solder
1.2 °C/second
Preheat: Temperature Min (Tsmin)
120 °C
Preheat: Temperature Max (Tsmax)
170 °C
Preheat: Time (tsmin to tsmax)
65-150 seconds
Time Maintained Above: Temperature (TL)
Time Maintained Above: Time (tL)
217 °C
45-90 seconds
Peak/Classification Temperature (Tp)
235 - 245 °C
Time Within 5 °C of Actual Peak Temperature (tp)
20-40 seconds
Ramp-Down Rate
1 - 6 °C/second
Time 25 °C to Peak Temperature
4 minutes max.
Note: All temperatures refer to the topside of the package, measured on the package body surface.
© 2021-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, and the Cree
LED logo are registered trademarks Cree LED. UL® and the UL logo are registered trademarks of UL LLC.
CLD-DS266
REV 6
31
XLAMP ® XHP70.3 LED
NOTES
Measurements
The luminous flux, radiant power, chromaticity, forward voltage and CRI measurements in this document are binning specifications
only and solely represent product measurements as of the date of shipment. These measurements will change over time based on a
number of factors that are not within Cree LED’s control and are not intended or provided as operational specifications for the products.
Calculated values are provided for informational purposes only and are not intended or provided as specifications.
Pre‑Release Qualification Testing
Please read the LED Reliability Overview for details of the qualification process Cree LED applies to ensure long-term reliability for XLamp
LEDs and details of Cree LED’s pre-release qualification testing for XLamp LEDs. Cree LED did not perform Room Temperature Operating
Life (RTOL) testing on the XHP70.3 LED.
Lumen Maintenance
Cree LED now uses standardized IES LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LED lumen
maintenance. For information on the specific LM-80 data sets available for this LED, refer to the public LM-80 results document.
Please read the Long-Term Lumen Maintenance application note for more details on Cree LED’s lumen maintenance testing and
forecasting. Please read the Thermal Management application note for details on how thermal design, ambient temperature, and drive
current affect the LED junction temperature.
Moisture Sensitivity
Cree LED recommends keeping XLamp LEDs in the provided, resealable moisture-barrier packaging (MBP) until immediately prior to
soldering. Unopened MBPs that contain XLamp LEDs do not need special storage for moisture sensitivity.
Once the MBP is opened, XLamp XHP70.3 LEDs may be stored as MSL 1 per JEDEC J-STD-033, meaning they have unlimited floor life
in conditions of ≤ 30 ºC/85% relative humidity (RH). Regardless of the storage condition, Cree LED recommends sealing any unsoldered
LEDs in the original MBP.
RoHS Compliance
The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold
limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as
implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree LED representative or from the Product
Ecology section of the Cree LED website.
REACH Compliance
REACH substances of very high concern (SVHCs) information is available for this product. Since the European Chemical Agency
(ECHA) has published notice of their intent to frequently revise the SVHC listing for the foreseeable future, please contact a Cree LED
representative to insure you get the most up-to-date REACH SVHC Declaration. REACH banned substance information (REACH Article 67)
is also available upon request.
© 2021-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, and the Cree
LED logo are registered trademarks Cree LED. UL® and the UL logo are registered trademarks of UL LLC.
CLD-DS266
REV 6
32
XLAMP ® XHP70.3 LED
NOTES - CONTINUED
UL® Recognized Component
This product meets the requirements to be considered a UL Recognized Component with Level 4 enclosure consideration. The LED
package or a portion thereof has been investigated as a fire and electrical enclosure per ANSI/UL 8750.
Vision Advisory
WARNING: Do not look at an exposed lamp in operation. Eye injury can result. For more information about LEDs and eye safety, please
refer to the LED Eye Safety application note.
© 2021-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, and the Cree
LED logo are registered trademarks Cree LED. UL® and the UL logo are registered trademarks of UL LLC.
CLD-DS266
REV 6
33
4
3
7.00
OPTICAL MODEL ORIG
XLAMP ® XHP70.3 LED
B
MECHANICAL DIMENSIONS
7.00
ANODE SIDE
CATHODE SIDE
Thermal vias, if present, are not shown on these drawings.
R3.76
AllOPTICAL
dimensions
are ±.13 mm unless otherwise indicated.
MODEL ORIGIN
TOP VIEW
XHP70.3 High Density
4
3
2
5.40
4.00
OPTICAL MODEL ORIGIN
0.56
ANODE SIDE
3
7.00
6.80
7.00
B
4
3.15
7.00
CATHODE SIDE
1
6.80
A
CATHODE
SIDE
OPTICAL MODEL OR
B4.49
TOP VIEW
CENTER PAD IS
ELECTRICALLY
ISOLATED
SIDE VIEW
Side View
Top View
6.80
3
ANODE SIDE
OPTICAL MODEL ORIGIN
4.00
TOP VIEW
XHP70.3 High Intensity
3.15
3
2
7.00
0.56
6.80
1
6.80
4.00
0.70
A
3.15
CATHODE
SIDE
7.00
CENTER PAD IS
ELECTRICALLY
ISOLATED
4
6.80
OPTICAL MODEL ORIGIN
SOLDERMASK MAY
BE PRESENT
BOTTOM VIEW
3
A
ANODE SIDE
2610-700002 XHP70D
1.00
OPTICAL MODEL ORIGIN
2
Top View
Side View
6.80
4.00
1
CENTER PAD IS
ELECTRICALLY
ISOLATED
SIDE VIEW
TOP VIEW
B
4
SOLDERMASK MAY
BE PRESENT
BOTTOM VIEW
Bottom View
3
0.70
6.80
3.15
A
SOLDERMASK MAY
BE PRESENT
BOTTOM VIEW
Bottom View
4
5.40
4
7.00
R3.76
OPTICAL MODEL ORIGIN
© 2021-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, and the Cree
LED logo are registered trademarks Cree LED. UL® and the UL logo are registered trademarks of UL LLC.
CLD-DS266
REV 6
34
A
XLAMP ® XHP70.3 LED
3
0.70
3.15
6.80
0.70
6.80
0.70
6.80
0.24
0.70
3.15
RECOMMENDED
12V
PCB
RECOMMENDED
12V PCB
FOOTPRINT
Recommended
12‑V
PCBFOOTPRINT
Footprint
(center pad is connected to anode and
6.70 6.70
cathode and is not electrically isolated)
0.24
0.41
4X
RECOMMENDED
6V
PCB FOOTPRINT
RECOMMENDED
6VPCB
PCB
FOOTPRINT
Recommended
6‑V
Footprint
(center pad is electrically isolated)
RECOMMENDED 6V PCB FOOTPRINT
0.80
28X
0.11
6.76
6.76
0.80
28X
0.50
6.76
0.50
B
0.50
A
0.70
16X
0.31
0.70
16X
0.55
8X
A
0.55
8X
3.15 0.55
8X
0.70
6.80
6.80
A
0.24
4.00
0.83
24X
6.70
6.80
0.70
RECOMMENDED
STENCIL
OPENING
RECOMMENDED
STENCIL
OPENING
CB FOOTPRINT
4
3
RECOMMENDED 6V AND 12V
PCB
SOLDER MASK
Recommended
6‑VOPENING
& 12‑V
PCB Solder Mask Opening
4
(solid area is open)
30.70
16X
0.80
28X
2
0.31
4
RECOMME
RECOMMENDED
PCB SOLDE
PCB SOLDER
MA
RECOMMENDED 12V PCB FOOTPRINT
1
0.31
2
0.70
3.15
3.15
3.15
6.80
0.11
6.80
4.00
2
6.80
B
3
4.00
0.41
4X
0.11
B
0.70
6.80
B
6.80
3.15
4
0.70
0.70
0.70
6.80
0.70
6.80
4.00
0.70
0.83
24X
4.00
6.80
6.80
6.80
0.70
2
2
6.80
3
0.83
24X
0.70
4
0.41
4X
4
6.80
MECHANICAL DIMENSIONS - CONTINUED
261
2610-70
2
RECOMMENDED STENCIL OPENING
Recommended Stencil Openings
6 V & 12 V Configurations
(solid 3
area is open)
2
A
2610-700002 XHP70D
© 2021-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, and the Cree
LED logo are registered trademarks Cree LED. UL® and the UL logo are registered trademarks of UL LLC.
2
1
CLD-DS266
REV 6
35
NEGATIVE B
XLAMP ® XHP70.3 LED
POSITIVE A
ELECTRICAL CONFIGURATION
12 V
6V
SOLDER PAD LINK
NEGATIVE A
POSITIVE A
NEGATIVE B
POSITIVE B
NEGATIVE B
POSITIVE A
6-V Configuration
12-V Configuration
6V
NEGATIVE A
POSITIVE A
NEGATIVE B
POSITIVE B
© 2021-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, and the Cree
LED logo are registered trademarks Cree LED. UL® and the UL logo are registered trademarks of UL LLC.
CLD-DS266
REV 6
36
XLAMP ® XHP70.3 LED
TAPE AND REEL
All Cree LED carrier tapes conform to EIA-481D, Automated Component Handling Systems Standard.
All dimensions are ±.13 mm unless otherwise indicated.
XHP70.3 High Density
Item
Ao
Bo
Ko
Po
P1
P2
T
E
F
Do
D1
W
R
Dim.
7.40
7.40
4.60
4.00
12.00
2.00
0.36
1.75
7.50
1.50
1.50
16.00
5°
XHP70.3 High Intensity
Item
Ao
Bo
Ko
Po
P1
P2
T
E
F
Do
D1
W
R
Dim.
7.60
7.60
1.70
4.00
12.00
2.00
0.30
1.75
7.50
1.50
1.50
16.00
3°
© 2021-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, and the Cree
LED logo are registered trademarks Cree LED. UL® and the UL logo are registered trademarks of UL LLC.
CLD-DS266
REV 6
37
XLAMP ® XHP70.3 LED
TAPE AND REEL - CONTINUED
Feed Direction
END
START
Trailer
Loaded Pockets
Leader
Min. 160 mm empty pockets
sealed with tape
1000 Lamps
Min. 400 mm empty pockets
with min. 100 mm sealed
Feed Direction
Cover Tape
Pocket Tape
13 mm
13”
© 2021-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, and the Cree
LED logo are registered trademarks Cree LED. UL® and the UL logo are registered trademarks of UL LLC.
CLD-DS266
REV 6
38
XLAMP ® XHP70.3 LED
PACKAGING
© 2021-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, and the Cree
LED logo are registered trademarks Cree LED. UL® and the UL logo are registered trademarks of UL LLC.
CLD-DS266
REV 6
39
工商网监
湘ICP备2023018690号
