MKRAWT-02-0000-0D0BH40E4

PRODUCT FAMILY DATA SHEET XLamp® MK-R LEDs PRODUCT DESCRIPTION FEATURES Built on Cree LED’s revolutionary SC³ Technology® platform, the • Available in ANSI white bins as well as 4-step and 2-step XLamp MK‑R LED brings new levels of price and performance EasyWhite bins at 2700 K, 3000 K, 3500 K, 4000 K, 4500 K and to directional LED arrays, enabling lighting manufacturers to 5000 K CCT ® create the next generation of high-lumen indoor and outdoor • Two voltage options: 6 V & 12 V LED lighting systems. In single-LED systems, the XLamp MK‑R • Low thermal resistance: 0.6 °C/W LED, with EasyWhite color binning, provides the LED industry’s • Maximum junction temperature: 150 °C tightest unit-to-unit color consistency. For systems using multiple • Binned at 85 °C LEDs, the MK-R enables manufacturers to use fewer LEDs while • Viewing angle: 120° maintaining light output and color consistency, which translates • Available in cool white, 70-, 80- and 90‑CRI minimums to lower system cost. • Unlimited floor life at ≤ 30 ºC/85% RH ® • Reflow solderable - JEDEC J‑STD‑020C The XLamp MK‑R LED is optimized for directional lighting • Electrically neutral thermal path applications and is a welcome addition to applications requiring • RoHS and REACH compliant high lumen output, a compact optical source and a broad palette • UL® recognized component (E349212) of color temperature and CRI values. Cree LED / 4001 E. Hwy. 54, Suite 2000 / Durham, NC 27709 USA / +1.919.313.5330 / www.cree-led.com © 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, SC3 Technology®, and the Cree LED logo are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. CLD-DS60 REV 10 1 XLAMP ® MK-R LED TABLE OF CONTENTS Characteristics........................................................................................................................................................................................................ 3 Flux Characteristics, EasyWhite® Order Codes and Bins - 6 V............................................................................................................................. 4 Flux Characteristics, ANSI White Order Codes and Bins - 6 V............................................................................................................................. 6 Flux Characteristics, EasyWhite® Order Codes and Bins -12 V............................................................................................................................ 9 Flux Characteristics, ANSI White Order Codes and Bins - 12 V......................................................................................................................... 11 Relative Spectral Power Distribution................................................................................................................................................................... 14 Relative Flux vs. Junction Temperature............................................................................................................................................................... 14 Electrical Characteristics...................................................................................................................................................................................... 15 Relative Flux vs. Current....................................................................................................................................................................................... 16 Relative Chromaticity vs. Current......................................................................................................................................................................... 17 Relative Chromaticity vs. Temperature................................................................................................................................................................ 18 Typical Spatial Distribution................................................................................................................................................................................... 18 Thermal Design..................................................................................................................................................................................................... 19 Performance Groups - Luminous Flux................................................................................................................................................................. 20 Performance Groups - Chromaticity.................................................................................................................................................................... 21 EasyWhite® Bins Plotted on the 1931 CIE Color Space...................................................................................................................................... 24 Standard Cool White Kits Plotted on ANSI Standard Chromaticity Regions..................................................................................................... 25 Standard Warm and Neutral White Kits Plotted on ANSI Standard Chromaticity Regions.............................................................................. 25 Bin and Order Code Formats................................................................................................................................................................................ 26 Reflow Soldering Characteristics......................................................................................................................................................................... 27 Notes..................................................................................................................................................................................................................... 28 Mechanical Dimensions....................................................................................................................................................................................... 30 Tape and Reel........................................................................................................................................................................................................ 31 Packaging.............................................................................................................................................................................................................. 33 © 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, SC3 Technology®, and the Cree LED logo are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC CLD-DS60 REV 10 2 XLAMP ® MK-R LED CHARACTERISTICS Characteristics Unit Thermal resistance, junction to solder point◊ °C/W 0.6 degrees 120 Temperature coefficient of voltage (6 V, 1400 mA, 85 °C) mV/°C -4 Temperature coefficient of voltage (12 V, 700 mA, 85 °C) mV/°C -8 Viewing angle - full width half maximum (FWHM) ESD withstand voltage (HBM per Mil-Std-883D) Minimum Typical Maximum V 8000 DC forward current (6 V, 1400 mA, 85 °C) mA 2500 DC forward current (12 V, 700 mA, 85 °C) mA 1250 Reverse voltage V Forward voltage (6 V, 1400 mA, 85 °C) V 5.85 1 7 Forward voltage (12 V, 700 mA, 85 °C) V 11.7 14 LED junction temperature °C 150 Note: ◊ Thermal resistance measurement was performed per the JEDEC JESD51-14 standard. See the Thermal Resistance Measurement application note for more details. © 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, SC3 Technology®, and the Cree LED logo are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC CLD-DS60 REV 10 3 XLAMP ® MK-R LED FLUX CHARACTERISTICS, EASYWHITE® ORDER CODES AND BINS - 6 V (IF = 1400 mA, TJ = 85 °C) The following tables provide order codes for XLamp MK‑R LEDs. For a complete description of the order code nomenclature, please reference Bin and Order Code Formats (page 26). Minimum Luminous Flux** Color CCT Range 5000 K 4500 K 4000 K 80-CRI EasyWhite 3500 K 3000 K 2700 K 2-Step 4-Step Group Flux (lm) @ 85 °C Flux (lm) @ 25 °C* H4 970 1091 H2 900 1012 G4 840 945 MKRAWT-00-0000-0B0HG450H MKRAWT-00-0000-0B0HG450F H4 970 1091 MKRAWT-00-0000-0B0HH445H MKRAWT-00-0000-0B0HH445F H2 900 1012 G4 840 945 MKRAWT-00-0000-0B0HG445H MKRAWT-00-0000-0B0HG445F H4 970 1091 MKRAWT-00-0000-0B0HH440H MKRAWT-00-0000-0B0HH440F H2 900 1012 G4 840 945 MKRAWT-00-0000-0B0HG440H MKRAWT-00-0000-0B0HG440F H4 970 1091 MKRAWT-00-0000-0B0HH435H MKRAWT-00-0000-0B0HH435F H2 900 1012 G4 840 945 G2 780 877 MKRAWT-00-0000-0B0HG235H MKRAWT-00-0000-0B0HG235F H2 900 1012 MKRAWT-00-0000-0B0HH230H MKRAWT-00-0000-0B0HH230F G4 840 945 Chromaticity Region Order Code Chromaticity Region MKRAWT-00-0000-0B0HH450H 50H 45H 40H 35H 30H MKRAWT-00-0000-0B0HH250H MKRAWT-00-0000-0B0HH245H MKRAWT-00-0000-0B0HH240H MKRAWT-00-0000-0B0HH235H MKRAWT-00-0000-0B0HG435H MKRAWT-00-0000-0B0HG430H Order Code MKRAWT-00-0000-0B0HH450F 50F 45F 40F 35F 30F MKRAWT-00-0000-0B0HH250F MKRAWT-00-0000-0B0HH245F MKRAWT-00-0000-0B0HH240F MKRAWT-00-0000-0B0HH235F MKRAWT-00-0000-0B0HG435F MKRAWT-00-0000-0B0HG430F G2 780 877 MKRAWT-00-0000-0B0HG230H MKRAWT-00-0000-0B0HG230F H2 900 1012 MKRAWT-00-0000-0B0HH227H MKRAWT-00-0000-0B0HH227F G4 840 945 G2 780 877 F4 730 821 27H MKRAWT-00-0000-0B0HG427H MKRAWT-00-0000-0B0HG227H 27F MKRAWT-00-0000-0B0HF427H MKRAWT-00-0000-0B0HG427F MKRAWT-00-0000-0B0HG227F MKRAWT-00-0000-0B0HF427F Notes: • • * ** Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements. See the Measurements section (page 28). Minimum CRI for 80-CRI White is 80. Flux values @ 25 °C are calculated and for reference only. XLamp MK‑R LED order codes specify only a minimum flux bin and not a maximum. Cree LED may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity restrictions specified by the order code. © 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, SC3 Technology®, and the Cree LED logo are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC CLD-DS60 REV 10 4 XLAMP ® MK-R LED FLUX CHARACTERISTICS, EASYWHITE® ORDER CODES AND BINS - 6 V (IF = 1400 mA, TJ = 85 °C) - CONTINUED Minimum Luminous Flux** Color CCT Range 3000 K 90-CRI EasyWhite 2700 K 2-Step 4-Step Group Flux (lm) @ 85 °C Flux (lm) @ 25 °C* F4 730 821 F2 680 765 E4 635 714 E2 590 664 MKRAWT-00-0000-0B0UE230H MKRAWT-00-0000-0B0UE230F F2 680 765 MKRAWT-00-0000-0B0UF227H MKRAWT-00-0000-0B0UF227F E4 635 714 E2 590 664 D4 550 619 Chromaticity Region Order Code Chromaticity Region MKRAWT-00-0000-0B0UF430H 30H 27H MKRAWT-00-0000-0B0UF230H MKRAWT-00-0000-0B0UE430H MKRAWT-00-0000-0B0UE427H MKRAWT-00-0000-0B0UE227H Order Code MKRAWT-00-0000-0B0UF430F 30F 27F MKRAWT-00-0000-0B0UD427H MKRAWT-00-0000-0B0UF230F MKRAWT-00-0000-0B0UE430F MKRAWT-00-0000-0B0UE427F MKRAWT-00-0000-0B0UE227F MKRAWT-00-0000-0B0UD427F Notes: • • * ** Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements. See the Measurements section (page 28). Minimum CRI for 90-CRI White is 90. Flux values @ 25 °C are calculated and for reference only. XLamp MK‑R LED order codes specify only a minimum flux bin and not a maximum. Cree LED may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity restrictions specified by the order code. © 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, SC3 Technology®, and the Cree LED logo are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC CLD-DS60 REV 10 5 XLAMP ® MK-R LED FLUX CHARACTERISTICS, ANSI WHITE ORDER CODES AND BINS - 6 V (IF = 1400 mA, TJ = 85 °C) Chromaticity Kit CCT 51 Minimum Luminous Flux** Code Flux (lm) @ 85 °C Flux (lm) @ 25 °C* 65 CRI Typical 70 CRI Minimum J4 1120 1260 MKRAWT-00-00000B00J4051 MKRAWT-00-00000B0BJ4051 J2 1040 1170 MKRAWT-00-00000B00J2051 MKRAWT-00-00000B0BJ2051 H4 970 1091 MKRAWT-00-00000B00H4051 MKRAWT-00-00000B0BH4051 H2 900 1012 J4 1120 1260 MKRAWT-00-00000B00J40E1 J2 1040 1170 MKRAWT-00-00000B00J20E1 MKRAWT-00-00000B0BJ20E1 H4 970 1091 MKRAWT-00-00000B00H40E1 MKRAWT-00-00000B0BH40E1 H2 900 1012 J4 1120 1260 MKRAWT-00-00000B00J40E2 MKRAWT-00-00000B0BJ40E2 J2 1040 1170 MKRAWT-00-00000B00J20E2 MKRAWT-00-00000B0BJ20E2 H4 970 1091 MKRAWT-00-00000B00H40E2 MKRAWT-00-00000B0BH40E2 H2 900 1012 J2 1040 1170 MKRAWT-00-00000B00J20E3 MKRAWT-00-00000B0BJ20E3 H4 970 1091 MKRAWT-00-00000B00H40E3 MKRAWT-00-00000B0BH40E3 MKRAWT-00-00000B0HH40E3 H2 900 1012 MKRAWT-00-00000B00H20E3 MKRAWT-00-00000B0BH20E3 MKRAWT-00-00000B0HH20E3 G4 840 945 J2 1040 1170 MKRAWT-00-00000B00J20E4 MKRAWT-00-00000B0BJ20E4 H4 970 1091 MKRAWT-00-00000B00H40E4 MKRAWT-00-00000B0BH40E4 MKRAWT-00-00000B0HH40E4 H2 900 1012 MKRAWT-00-00000B00H20E4 MKRAWT-00-00000B0BH20E4 MKRAWT-00-00000B0HH20E4 G4 840 945 6200 K E1 6500 K E2 5700 K E3 5000 K E4 Order Codes 4500 K 80 CRI Minimum 90 CRI Minimum MKRAWT-00-00000B0BH2051 MKRAWT-00-00000B0BH20E1 MKRAWT-00-00000B0BH20E2 MKRAWT-00-00000B0HG40E3 MKRAWT-00-00000B0HG40E4 Notes: • • * ** Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements. See the Measurements section (page 28). For information on chromaticity bins contained in the kits listed above, please reference the Performance Groups - Chromaticity section starting on page 21. Flux values @ 25 °C are calculated and for reference only. XLamp MK‑R LED order codes specify only a minimum flux bin and not a maximum. Cree LED may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity restrictions specified by the order code. © 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, SC3 Technology®, and the Cree LED logo are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC CLD-DS60 REV 10 6 XLAMP ® MK-R LED FLUX CHARACTERISTICS, ANSI WHITE ORDER CODES AND BINS - 6 V (IF = 1400 mA, TJ = 85 °C) - CONTINUED Chromaticity Kit CCT E5 Minimum Luminous Flux** Code Flux (lm) @ 85 °C Flux (lm) @ 25 °C* 65 CRI Typical 70 CRI Minimum J2 1040 1170 MKRAWT-00-00000B00J20E5 MKRAWT-00-00000B0BJ20E5 H4 970 1091 MKRAWT-00-00000B00H40E5 MKRAWT-00-00000B0BH40E MKRAWT-00-00000B0HH40E5 H2 900 1012 MKRAWT-00-00000B00H20E5 MKRAWT-00-00000B0BH20E MKRAWT-00-00000B0HH20E5 G4 840 945 MKRAWT-00-00000B00G40E5 MKRAWT-00-00000B0BG40E5 MKRAWT-00-00000B0HG40E5 H4 970 1091 MKRAWT-00-00000B0BH40E6 MKRAWT-00-00000B0HH40E6 H2 900 1012 MKRAWT-00-00000B0BH20E6 MKRAWT-00-00000B0HH20E6 G4 840 945 MKRAWT-00-00000B0BG40E6 MKRAWT-00-00000B0HG40E6 G2 780 877 H4 970 1091 MKRAWT-00-00000B0BH40E7 H2 900 1012 MKRAWT-00-00000B0BH20E7 MKRAWT-00-00000B0HH20E7 G4 840 945 MKRAWT-00-00000B0BG40E7 MKRAWT-00-00000B0HG40E7 G2 780 877 F4 730 821 MKRAWT-00-00000B0UF40E7 F2 680 765 MKRAWT-00-00000B0UF20E7 E4 635 714 MKRAWT-00-00000B0UE40E7 E2 590 664 MKRAWT-00-00000B0UE20E7 4000 K E6 3500 K E7 Order Codes 3000 K 80 CRI Minimum 90 CRI Minimum MKRAWT-00-00000B0HG20E6 MKRAWT-00-00000B0HG20E7 Notes: • • * ** Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements. See the Measurements section (page 28). For information on chromaticity bins contained in the kits listed above, please reference the Performance Groups - Chromaticity section starting on page 21. Flux values @ 25 °C are calculated and for reference only. XLamp MK‑R LED order codes specify only a minimum flux bin and not a maximum. Cree LED may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity restrictions specified by the order code. © 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, SC3 Technology®, and the Cree LED logo are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC CLD-DS60 REV 10 7 XLAMP ® MK-R LED FLUX CHARACTERISTICS, ANSI WHITE ORDER CODES AND BINS - 6 V (IF = 1400 mA, TJ = 85 °C) - CONTINUED Chromaticity Kit CCT E8 Minimum Luminous Flux** Order Codes Code Flux (lm) @ 85 °C Flux (lm) @ 25 °C* H2 900 1012 MKRAWT-00-00000B0HH20E8 G4 840 945 MKRAWT-00-00000B0HG40E8 G2 780 877 MKRAWT-00-00000B0HG20E8 F4 730 821 MKRAWT-00-00000B0HF40E8 F2 680 765 MKRAWT-00-00000B0UF20E8 E4 635 714 MKRAWT-00-00000B0UE40E8 E2 590 664 MKRAWT-00-00000B0UE20E8 D4 550 619 MKRAWT-00-00000B0UD40E8 2700 K 65 CRI Typical 70 CRI Minimum 80 CRI Minimum 90 CRI Minimum Notes: • • * ** Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements. See the Measurements section (page 28). For information on chromaticity bins contained in the kits listed above, please reference the Performance Groups - Chromaticity section starting on page 21. Flux values @ 25 °C are calculated and for reference only. XLamp MK‑R LED order codes specify only a minimum flux bin and not a maximum. Cree LED may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity restrictions specified by the order code. © 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, SC3 Technology®, and the Cree LED logo are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC CLD-DS60 REV 10 8 XLAMP ® MK-R LED FLUX CHARACTERISTICS, EASYWHITE® ORDER CODES AND BINS -12 V (IF = 700 mA, TJ = 85 °C) The following tables provide order codes for XLamp MK‑R LEDs. For a complete description of the order code nomenclature, please reference Bin and Order Code Formats (page 26). Minimum Luminous Flux** Color CCT Range 5000 K 4500 K 4000 K 80-CRI EasyWhite 3500 K 3000 K 2700 K 2-Step 4-Step Group Flux (lm) @ 85 °C Flux (lm) @ 25 °C* H4 970 1091 H2 900 1012 G4 840 945 MKRAWT-00-0000-0D0HG450H MKRAWT-00-0000-0D0HG450F H4 970 1091 MKRAWT-00-0000-0D0HH445H MKRAWT-00-0000-0D0HH445F H2 900 1012 G4 840 945 MKRAWT-00-0000-0D0HG445H MKRAWT-00-0000-0D0HG445F H4 970 1091 MKRAWT-00-0000-0D0HH440H MKRAWT-00-0000-0D0HH440F H2 900 1012 G4 840 945 MKRAWT-00-0000-0D0HG440H MKRAWT-00-0000-0D0HG440F H4 970 1091 MKRAWT-00-0000-0D0HH435H MKRAWT-00-0000-0D0HH435F H2 900 1012 G4 840 945 G2 780 877 MKRAWT-00-0000-0D0HG235H MKRAWT-00-0000-0D0HG235F H2 900 1012 MKRAWT-00-0000-0D0HH230H MKRAWT-00-0000-0D0HH230F G4 840 945 Chromaticity Region Order Code Chromaticity Region MKRAWT-00-0000-0D0HH450H 50H 45H 40H 35H 30H MKRAWT-00-0000-0D0HH250H MKRAWT-00-0000-0D0HH245H MKRAWT-00-0000-0D0HH240H MKRAWT-00-0000-0D0HH235H MKRAWT-00-0000-0D0HG435H MKRAWT-00-0000-0D0HG430H Order Code MKRAWT-00-0000-0D0HH450F 50F 45F 40F 35F 30F MKRAWT-00-0000-0D0HH250F MKRAWT-00-0000-0D0HH245F MKRAWT-00-0000-0D0HH240F MKRAWT-00-0000-0D0HH235F MKRAWT-00-0000-0D0HG435F MKRAWT-00-0000-0D0HG430F G2 780 877 MKRAWT-00-0000-0D0HG230H MKRAWT-00-0000-0D0HG230F H2 900 1012 MKRAWT-00-0000-0D0HH227H MKRAWT-00-0000-0D0HH227F G4 840 945 G2 780 877 F4 730 821 27H MKRAWT-00-0000-0D0HG427H MKRAWT-00-0000-0D0HG227H 27F MKRAWT-00-0000-0D0HF427H MKRAWT-00-0000-0D0HG427F MKRAWT-00-0000-0D0HG227F MKRAWT-00-0000-0D0HF427F Notes: • • * ** Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements. See the Measurements section (page 28). Minimum CRI for 80-CRI White is 80. Flux values @ 25 °C are calculated and for reference only. XLamp MK‑R LED order codes specify only a minimum flux bin and not a maximum. Cree LED may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity restrictions specified by the order code. © 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, SC3 Technology®, and the Cree LED logo are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC CLD-DS60 REV 10 9 XLAMP ® MK-R LED FLUX CHARACTERISTICS, EASYWHITE® ORDER CODES AND BINS - 12 V (IF = 700 mA, TJ = 85 °C) - CONTINUED Minimum Luminous Flux** Color CCT Range 3000 K 90-CRI EasyWhite 2700 K 2-Step 4-Step Group Flux (lm) @ 85 °C Flux (lm) @ 25 °C* F4 730 821 F2 680 765 E4 635 714 E2 590 664 MKRAWT-00-0000-0D0UE230H MKRAWT-00-0000-0D0UE230F F2 680 765 MKRAWT-00-0000-0D0UF227H MKRAWT-00-0000-0D0UF227F E4 635 714 E2 590 664 D4 550 619 Chromaticity Region Order Code Chromaticity Region MKRAWT-00-0000-0D0UF430H 30H 27H MKRAWT-00-0000-0D0UF230H MKRAWT-00-0000-0D0UE430H MKRAWT-00-0000-0D0UE427H MKRAWT-00-0000-0D0UE227H Order Code MKRAWT-00-0000-0D0UF430F 30F 27F MKRAWT-00-0000-0D0UD427H MKRAWT-00-0000-0D0UF230F MKRAWT-00-0000-0D0UE430F MKRAWT-00-0000-0D0UE427F MKRAWT-00-0000-0D0UE227F MKRAWT-00-0000-0D0UD427F Notes: • • * ** Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements. See the Measurements section (page 28). Minimum CRI for 90-CRI White is 90. Flux values @ 25 °C are calculated and for reference only. XLamp MK‑R LED order codes specify only a minimum flux bin and not a maximum. Cree LED may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity restrictions specified by the order code. © 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, SC3 Technology®, and the Cree LED logo are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC CLD-DS60 REV 10 10 XLAMP ® MK-R LED FLUX CHARACTERISTICS, ANSI WHITE ORDER CODES AND BINS - 12 V (IF = 700 mA, TJ = 85 °C) Chromaticity Kit 51 E1 E2 E3 E4 CCT Minimum Luminous Flux** Order Codes Code Flux (lm) @ 85 °C Flux (lm) @ 25 °C* 65 CRI Typical 70 CRI Minimum J4 1120 1260 MKRAWT-00-00000D00J4051 MKRAWT-00-00000D0BJ4051 J2 1040 1170 MKRAWT-00-00000D00J2051 MKRAWT-00-00000D0BJ2051 H4 970 1091 MKRAWT-00-00000D00H4051 MKRAWT-00-00000D0BH4051 H2 900 1012 J4 1120 1260 MKRAWT-00-00000D00J40E1 J2 1040 1170 MKRAWT-00-00000D00J20E1 MKRAWT-00-00000D0BJ20E1 H4 970 1091 MKRAWT-00-00000D00H40E1 MKRAWT-00-00000D0BH40E1 H2 900 1012 J4 1120 1260 MKRAWT-00-00000D00J40E2 MKRAWT-00-00000D0BJ40E2 J2 1040 1170 MKRAWT-00-00000D00J20E2 MKRAWT-00-00000D0BJ20E2 H4 970 1091 MKRAWT-00-00000D00H40E2 MKRAWT-00-00000D0BH40E2 H2 900 1012 J2 1040 1170 MKRAWT-00-00000D00J20E3 MKRAWT-00-00000D0BJ20E3 H4 970 1091 MKRAWT-00-00000D00H40E3 MKRAWT-00-00000D0BH40E3 MKRAWT-00-00000D0HH40E3 H2 900 1012 MKRAWT-00-00000D00H20E3 MKRAWT-00-00000D0BH20E3 MKRAWT-00-00000D0HH20E3 G4 840 945 J2 1040 1170 MKRAWT-00-00000D00J20E4 MKRAWT-00-00000D0BJ20E4 H4 970 1091 MKRAWT-00-00000D00H40E4 MKRAWT-00-00000D0BH40E4 MKRAWT-00-00000D0HH40E4 H2 900 1012 MKRAWT-00-00000D00H20E4 MKRAWT-00-00000D0BH20E4 MKRAWT-00-00000D0HH20E4 G4 840 945 6200 K 6500 K 5700 K 5000 K 4500 K 80 CRI Minimum 90 CRI Minimum MKRAWT-00-00000D0BH2051 MKRAWT-00-00000D0BH20E1 MKRAWT-00-00000D0BH20E2 MKRAWT-00-00000D0HG40E3 MKRAWT-00-00000D0HG40E4 Notes: • • * ** Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements. See the Measurements section (page 28). For information on chromaticity bins contained in the kits listed above, please reference the Performance Groups - Chromaticity section starting on page 21. Flux values @ 25 °C are calculated and for reference only. XLamp MK‑R LED order codes specify only a minimum flux bin and not a maximum. Cree LED may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity restrictions specified by the order code. © 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, SC3 Technology®, and the Cree LED logo are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC CLD-DS60 REV 10 11 XLAMP ® MK-R LED FLUX CHARACTERISTICS, ANSI WHITE ORDER CODES AND BINS - 12 V (IF = 700 mA, TJ = 85 °C) - CONTINUED Chromaticity Kit E5 E6 E7 CCT Minimum Luminous Flux** Order Codes Code Flux (lm) @ 85 °C Flux (lm) @ 25 °C* 65 CRI Typical 70 CRI Minimum J2 1040 1170 MKRAWT-00-00000D00J20E5 MKRAWT-00-00000D0BJ20E5 H4 970 1091 MKRAWT-00-00000D00H40E5 MKRAWT-00-00000D0BH40E MKRAWT-00-00000D0HH40E5 H2 900 1012 MKRAWT-00-00000D00H20E5 MKRAWT-00-00000D0BH20E MKRAWT-00-00000D0HH20E5 G4 840 945 MKRAWT-00-00000D00G40E5 MKRAWT-00-00000D0BG40E5 MKRAWT-00-00000D0HG40E5 H4 970 1091 MKRAWT-00-00000D0BH40E6 MKRAWT-00-00000D0HH40E6 H2 900 1012 MKRAWT-00-00000D0BH20E6 MKRAWT-00-00000D0HH20E6 G4 840 945 MKRAWT-00-00000D0BG40E6 MKRAWT-00-00000D0HG40E6 G2 780 877 H4 970 1091 MKRAWT-00-00000D0BH40E7 H2 900 1012 MKRAWT-00-00000D0BH20E7 MKRAWT-00-00000D0HH20E7 G4 840 945 MKRAWT-00-00000D0BG40E7 MKRAWT-00-00000D0HG40E7 G2 780 877 F4 730 821 MKRAWT-00-00000D0UF40E7 F2 680 765 MKRAWT-00-00000D0UF20E7 E4 635 714 MKRAWT-00-00000D0UE40E7 E2 590 664 MKRAWT-00-00000D0UE20E7 4000 K 3500 K 3000 K 80 CRI Minimum 90 CRI Minimum MKRAWT-00-00000D0HG20E6 MKRAWT-00-00000D0HG20E7 Notes: • • * ** Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements. See the Measurements section (page 28). For information on chromaticity bins contained in the kits listed above, please reference the Performance Groups - Chromaticity section starting on page 21. Flux values @ 25 °C are calculated and for reference only. XLamp MK‑R LED order codes specify only a minimum flux bin and not a maximum. Cree LED may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity restrictions specified by the order code. © 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, SC3 Technology®, and the Cree LED logo are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC CLD-DS60 REV 10 12 XLAMP ® MK-R LED FLUX CHARACTERISTICS, ANSI WHITE ORDER CODES AND BINS - 12 V (IF = 700 mA, TJ = 85 °C) - CONTINUED Chromaticity Kit E8 CCT Minimum Luminous Flux** Order Codes Code Flux (lm) @ 85 °C Flux (lm) @ 25 °C* H2 900 1012 MKRAWT-00-00000D0HH20E8 G4 840 945 MKRAWT-00-00000D0HG40E8 G2 780 877 MKRAWT-00-00000D0HG20E8 F4 730 821 MKRAWT-00-00000D0HF40E8 F2 680 765 MKRAWT-00-00000D0UF20E8 E4 635 714 MKRAWT-00-00000D0UE40E8 E2 590 664 MKRAWT-00-00000D0UE20E8 D4 550 619 MKRAWT-00-00000D0UD40E8 2700 K 65 CRI Typical 70 CRI Minimum 80 CRI Minimum 90 CRI Minimum Notes: • • * ** Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements. See the Measurements section (page 28). For information on chromaticity bins contained in the kits listed above, please reference the Performance Groups - Chromaticity section starting on page 21. Flux values @ 25 °C are calculated and for reference only. XLamp MK‑R LED order codes specify only a minimum flux bin and not a maximum. Cree LED may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity restrictions specified by the order code. © 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, SC3 Technology®, and the Cree LED logo are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC CLD-DS60 REV 10 13 XLAMP ® MK-R LED Relative Spectral Power RELATIVE SPECTRAL POWER DISTRIBUTION (6 V, 1400 mA; 12 V, 700 mA; TJ= 85 °C) 100% Relative Radiant Power 80% 60% Cool White Neutral White Warm White 40% 20% 0% 380 430 480 530 580 630 680 Relative Flux Output vs. Junction Temperature 730 780 Wavelength (nm) RELATIVE FLUX VS. JUNCTION TEMPERATURE (6 V, IF = 1400 mA; 12 V, IF = 700 mA) 120% Relative Luminous Flux 100% 80% 60% 40% 20% 0% 25 50 75 100 125 150 Junction Temperature (ºC) © 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, SC3 Technology®, and the Cree LED logo are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC CLD-DS60 REV 10 14 XLAMP ® MK-R LED Electrical Characteristics (Tj = 85ºC) ELECTRICAL CHARACTERISTICS (TJ = 85 °C) 2500 Forward Current (mA) 2000 1500 6V 1000 500 0 5.25 5.50 5.75 6.00 6.25 Forward Voltage (V) 1250 Forward Current (mA) 1000 750 12 V 500 250 0 10.5 11.0 11.5 12.0 12.5 Forward Voltage (V) © 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, SC3 Technology®, and the Cree LED logo are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC CLD-DS60 REV 10 15 XLAMP ® MK-R LED Relative Intensity vs. Current (Tj = 85ºC) RELATIVE FLUX VS. CURRENT (TJ = 85 °C) 180% Relative Luminous Flux 150% 120% 6V 90% 60% 30% 0% 0 500 1000 1500 2000 2500 Forward Current (mA) 180% Relative Luminous Flux 150% 120% 12 V 90% 60% 30% 0% 0 250 500 750 1000 1250 Forward Current (mA) © 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, SC3 Technology®, and the Cree LED logo are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC CLD-DS60 REV 10 16 XLAMP ® MK-R LED Relative Chromaticity Vs. Current--WARM Warm White RELATIVE CHROMATICITY VS. CURRENT WHITE (TJ = 85 °C) 0.020 0.016 6V 0.012 0.008 0.004 ΔCCx 0.000 ΔCCy -0.004 -0.008 -0.012 -0.016 -0.020 0 500 1000 1500 2000 2500 Current (mA) 0.020 0.016 12 V 0.012 0.008 0.004 ΔCCx 0.000 ΔCCy -0.004 -0.008 -0.012 -0.016 -0.020 0 250 500 750 1000 1250 Current (mA) © 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, SC3 Technology®, and the Cree LED logo are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC CLD-DS60 REV 10 17 XLAMP ® MK-R LED Relative Chromaticity Vs. Temperature - Warm White ΔCCx RELATIVE CHROMATICITY VS. TEMPERATURE - WARM WHITE (6 V, IF = 1400 mA; 12 V, IF = 700 mA) 0.020 0.016 0.012 0.008 0.004 ΔCCx 0.000 ΔCCy -0.004 -0.008 -0.012 -0.016 -0.020 0 25 50 75 100 125 150 Tsp (°C) Typical Spatial Radiation Pattern TYPICAL SPATIAL DISTRIBUTION Relative Luminous Intensity 100% 80% 60% 40% 20% -90 -70 -50 -30 -10 0% 10 30 50 70 90 Angle (º) © 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, SC3 Technology®, and the Cree LED logo are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC CLD-DS60 REV 10 18 XLAMP ® MK-R LED Thermal Design THERMAL DESIGN The maximum forward current is determined by the thermal resistance between the LED junction and ambient. It is crucial for the end product to be designed in a manner that minimizes the thermal resistance from the solder point to ambient in order to optimize lamp life and optical characteristics. 3000 Maximum Current (mA) 2500 2000 1500 6V 1000 Rj-a = 2°C/W Rj-a = 4°C/W 500 Rj-a = 6°C/W Rj-a = 8°C/W 0 0 20 40 60 80 100 120 140 160 Ambient Temperature (ºC) 1500 Maximum Current (mA) 1250 1000 12 V 750 500 Rj-a = 2°C/W Rj-a = 4°C/W 250 Rj-a = 6°C/W Rj-a = 8°C/W 0 0 20 40 60 80 100 120 140 160 Ambient Temperature (ºC) © 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, SC3 Technology®, and the Cree LED logo are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC CLD-DS60 REV 10 19 XLAMP ® MK-R LED PERFORMANCE GROUPS - LUMINOUS FLUX (TJ = 85 °C) XLamp MK-R LEDs are tested for luminous flux and placed into one of the following bins. Group Code Minimum Luminous Flux Maximum Luminous Flux D2 510 550 D4 550 590 E2 590 635 E4 635 680 F2 680 730 F4 730 780 G2 780 840 G4 840 900 H2 900 970 H4 970 1040 J2 1040 1120 J4 1120 1200 K2 1200 1290 © 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, SC3 Technology®, and the Cree LED logo are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC CLD-DS60 REV 10 20 XLAMP ® MK-R LED PERFORMANCE GROUPS - CHROMATICITY (TJ = 85 °C) XLamp MK‑R LEDs are tested for chromaticity and placed into one of the regions defined by the following bounding coordinates. EasyWhite Color Temperatures – 4-Step Code 50H 45H 40H 35H 30H 27H CCT 5000 K 4500 K 4000 K 3500 K 3000 K 2700 K EasyWhite Color Temperatures – 2-Step x y 0.3407 0.3415 0.3499 0.3654 0.3484 0.3674 Code x y 0.3459 0.3429 0.3507 0.3586 0.3434 0.3571 0.3475 0.3604 0.3521 0.3469 0.3539 0.3772 0.3643 0.3720 0.3582 0.3710 0.3597 0.3689 0.3562 0.3573 0.3587 0.3620 0.3642 0.3625 0.3628 0.3647 0.3744 0.3685 0.3784 0.3741 0.3782 0.3837 0.3804 0.3818 0.3912 0.3917 0.3867 0.3857 0.3863 0.3758 0.3844 0.3778 0.3981 0.3800 0.4030 0.3857 0.4040 0.3966 0.4061 0.3941 0.4186 0.4037 0.4132 0.3976 0.4116 0.3865 0.4099 0.3890 0.4242 0.3919 0.4291 0.3973 0.4322 0.4096 0.4333 0.4062 0.4449 0.4141 0.4395 0.4084 0.3994 50F 45F 40F 35F 30F CCT 5000 K 4500 K 4000 K 3500 K 3000 K 0.4359 0.3960 0.4351 0.4475 0.3994 0.4528 0.4046 0.4573 0.4178 0.4578 0.4138 0.4695 0.4207 0.4638 0.4152 0.4589 0.4021 0.4586 0.4060 27F 2700 K © 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, SC3 Technology®, and the Cree LED logo are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC CLD-DS60 REV 10 21 XLAMP ® MK-R LED PERFORMANCE GROUPS - CHROMATICITY (TJ = 85 °C) - CONTINUED ANSI White Bins Code CCT Bin Code 0A0 0B0 051 6200 K 0C0 0D0 Bin Code x y x y 0.2920 0.2984 0.3060 0.2950 0.3133 0.3009 0.3009 0.3042 0.2950 0.2970 0.3037 0.2937 0.2980 0.2880 0.2895 0.2962 0.3135 0.2870 0.3220 0.2937 0.2984 0.3133 0.2962 0.3220 0.2920 0.2962 0.3060 0.2895 0.3220 0.2937 0.3028 0.3304 0.3048 0.3207 0.2984 0.3133 0.2984 0.3048 0.3068 0.3113 0.3009 0.3042 Bin Code x y 0.2970 0.3048 0.3042 0.3130 0.3144 0.3186 0.3068 0.3113 0.3210 0.3028 0.3312 0.3115 0.3130 0.3290 0.3135 0.3048 0.3312 0.3115 0.3005 0.3415 0.3028 0.3304 0.2962 0.3220 0.3133 0.3009 0.3207 0.3068 0.3093 0.2993 0.3037 0.2937 0R0 0S0 0T0 0U0 Bin Code x y 0.3207 0.3068 0.3113 0.3290 0.3144 0.3186 0.3161 0.3059 0.3093 0.2993 0.3304 0.3005 0.3415 0.3391 0.3099 0.3509 0.3115 0.3391 0.3207 0.3028 0.3304 0.3391 0.3099 0.3509 0.3205 0.3481 0.3196 0.3602 0.3213 0.3373 0.3205 0.3481 0.3130 0.3290 0.3115 0.3391 0.3042 0.3130 0.3290 0.3144 0.3186 0.3113 0.3213 0.3373 0.3221 0.3261 0.3221 0.3261 0.3231 0.3120 0.3144 0.3186 0.3161 0.3059 x y .3371 .3490 .3451 .3554 .3440 .3427 1A0 1B0 1C0 1D0 1R0 1S0 1T0 1U0 ANSI White Bins Code CCT Bin Code 2A0 2B0 051 6200 K 2C0 2D0 x y 0.3215 0.3350 0.3290 0.3417 0.3290 0.3300 0.3222 Bin Code Bin Code x y 0.3222 0.3243 0.3290 0.3300 0.3290 0.3180 0.3243 0.3231 0.3120 .3366 .3369 0.3207 0.3462 0.3196 0.3602 .3376 .3616 0.3290 0.3538 0.3290 0.3690 .3463 .3687 0.3290 0.3417 0.3290 0.3538 .3451 .3554 0.3215 0.3350 0.3207 0.3462 .3371 .3490 0.3290 0.3538 0.3290 0.3690 .3463 .3687 0.3376 0.3616 0.3381 0.3762 .3551 .3760 0.3371 0.3490 0.3376 0.3616 .3533 .3620 0.3290 0.3417 0.3290 0.3538 .3451 .3554 0.3290 0.3417 0.3290 0.3300 .3451 .3554 0.3371 0.3490 0.3366 0.3369 .3533 .3620 0.3366 0.3369 0.3361 0.3245 .3515 .3487 0.3290 0.3300 0.3290 0.3180 .3440 .3427 2R0 2S0 2T0 2U0 3A0 3B0 3C0 3D0 © 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, SC3 Technology®, and the Cree LED logo are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC CLD-DS60 REV 10 22 XLAMP ® MK-R LED PERFORMANCE GROUPS - CHROMATICITY (TJ = 85 °C) - CONTINUED ANSI White Bins Code Bin Code CCT 1A0 1B0 0E1 6500 K 1C0 1D0 CCT Bin Code 4A0 4B0 0E4 4500 K 4C0 4D0 Bin Code x y 0.3048 0.3207 0.3130 0.3290 0.3144 0.3186 0.3068 0.3113 0.3222 0.3028 0.3304 0.3115 0.3391 0.3130 0.3290 0.3048 0.3207 0.3115 0.3391 0.3205 0.3481 0.3213 0.3373 0.3130 0.3290 0.3290 0.3130 0.3290 0.3213 0.3373 0.3221 0.3261 0.3144 0.3186 Code CCT 2A0 2B0 0E2 5700 K 2C0 2D0 y .3371 .3490 .3451 .3554 .3440 .3427 0.3243 .3366 .3369 0.3207 0.3462 .3376 .3616 0.3290 0.3538 .3463 .3687 0.3290 0.3417 .3451 .3554 0.3215 0.3350 .3371 .3490 .3463 .3687 .3551 .3760 .3533 .3620 0.3417 .3451 .3554 0.3290 0.3417 .3451 .3554 0.3371 0.3490 .3533 .3620 0.3366 0.3369 .3515 .3487 .3440 .3427 x y y 0.3215 0.3350 0.3290 0.3417 0.3290 0.3300 0.3290 0.3538 0.3376 0.3616 0.3371 0.3490 Code CCT 3A0 3B0 0E3 5000 K 3C0 3D0 0.3300 ANSI White Bins x y .3530 .3615 .3590 .3521 .3512 .3548 Code CCT Bin Code Bin Code x x 0.3290 ANSI White Bins Code ANSI White Bins ANSI White Bins ANSI White Bins y .3597 .3670 .3578 .3889 .3690 .3659 .3702 .3722 .3941 .3848 .3825 .3798 .4080 .3916 .3465 .3783 .3646 .4017 .3751 .3736 .3702 .3722 .3941 .3848 .3641 .3804 .3736 .3874 .3996 .4015 .3615 .3659 .3869 .3958 .4146 .4089 .3530 .3597 .3825 .3798 .4080 .3916 .3641 .3804 .3825 .3798 .4080 .3916 .3736 .3874 .3869 .3958 .4146 .4089 .3702 .3722 .4006 .4044 .4299 .4165 .3615 .3659 .3950 .3875 .4221 .3984 .3668 .3957 .3783 .3646 .4017 .3751 .3771 .4034 .3825 .3798 .4080 .3916 .3736 .3874 .3950 .3875 .4221 .3984 .3641 .3804 .3898 .3716 .4147 .3814 5A0 5B0 0E5 4000 K 5C0 5D0 Code CCT Bin Code x 6A0 6B0 0E6 © 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, SC3 Technology®, and the Cree LED logo are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC 3500 K 6C0 6D0 CLD-DS60 REV 10 23 XLAMP ® MK-R LED PERFORMANCE GROUPS - CHROMATICITY (TJ = 85 °C) - CONTINUED ANSI White Bins Code Bin Code CCT 7A0 7B0 0E7 ANSI White Bins 3000 K 7C0 7D0 x y Code .4147 .4221 .4342 .4028 .4259 .3853 .4221 .3984 .4299 .4165 .4430 .4212 .4342 .4028 .4342 .4028 .4430 .4212 .4562 .4260 .4465 .4071 .4259 .3853 .4342 .4028 .4465 .4071 .4373 .3893 Bin Code CCT x y .3814 .4373 .3893 .3984 .4465 .4071 .4582 .4099 .4483 .3919 .4465 .4071 .4562 .4260 .4687 .4289 .4582 .4099 .4582 .4099 .4687 .4289 .4813 .4319 .4700 .4126 .4483 .3919 .4582 .4099 .4700 .4126 .4593 .3944 8A0 8B0 0E8 2700 K 8C0 8D0 EASYWHITE® BINS PLOTTED ON THE 1931 CIE COLOR SPACE (TJ = 85 °C) 0.45 ANSI C78.377 Quadrangle EasyWhite 4-step EasyWhite 2-step 0.44 2700 K 3000 K 0.43 3500 K 0.42 4000 K 4500 K 0.41 CCy 0.40 5000 K 0.39 5700 K 0.38 0.37 0.36 0.35 0.34 0.33 0.49 0.48 0.47 0.46 0.45 0.44 0.43 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0.35 0.34 0.33 0.32 0.32 CCx © 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, SC3 Technology®, and the Cree LED logo are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC CLD-DS60 REV 10 24 XLAMP ® MK-R LED STANDARD COOL WHITE KITS PLOTTED ON ANSI STANDARD CHROMATICITY REGIONS 0.40 0.40 5000 K 0.39 0.38 3S 51 6500 K 0.36 6500 K 0T 0C 1D 2U 0A ANSI C78.377A 2R 1A 1U 0D 1R 0U 0.30 0.36 0.35 0.28 0.36 0.35 0.34 0.33 0.32 0.28 0.31 0.28 0.30 0.29 0.34 0R 0R 0.29 0C 0B 0.31 1R 0U 0.29 0.28 0S 0.32 3R 2A 1B 0.33 0A 0.30 1U 3A 2D 1C 0.32 0.31 ANSI C78.377A 2R 1A 0D 0T 0.33 2U 1D 2C 2B 1S 0.31 0B 3R 2A 1B 3B 2S 1T 8000 K 0.34 0.30 0S 0.32 2D 1C 0.29 0.33 3A 2B 1S 3S 2T E1 0.35 CCy 8000 K 0.34 0.36 3B 2C 1T 5700 K E2 0.37 2T 2S 0.35 CCy 0.38 5700 K 0.37 5000 K 0.39 CCx CCx STANDARD WARM AND NEUTRAL WHITE KITS PLOTTED ON ANSI STANDARD CHROMATICITY REGIONS 0.46 0.45 2700 K 3000 K 0.44 0.43 0.42 4000 K 0.41 E6 4500 K E5 0.40 CCy E7 3500 K 5000 K 0.39 0.38 E3 0.37 0.36 E4 4B 3C 4D 3B 5C3 5C2 5B1 6B2 5D3 6A2 5D2 5A3 5D4 6A1 5A2 5D1 5A4 5A1 6A3 6A4 6D2 6D1 7B1 6C4 6C1 6B4 5C4 6B1 5C1 5B4 4C 6C2 6B3 5B3 5B2 6C3 6D3 6D4 7A2 7A1 7A4 7B4 7A3 7D1 7C2 7B3 7B2 7C1 7D4 8B1 7C4 7D3 7D2 7C3 8A1 8A2 8A3 8B2 E8 8B3 8B4 8D2 8C1 8C2 8C3 8C4 8D3 8D4 8A4 8D1 ANSI C78.377A 4A 3D 0.35 3A 0.34 0.49 0.48 0.47 0.46 0.45 0.44 0.43 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0.35 0.34 0.33 0.33 CCx © 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, SC3 Technology®, and the Cree LED logo are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC CLD-DS60 REV 10 25 XLAMP ® MK-R LED BIN AND ORDER CODE FORMATS Bin codes and order codes are configured as follows. Order Code Bin Code Series = MKR Series = MKR Internal code Internal code Forward voltage class B=6V D = 12 V Luminous flux group CRI specification B = 70-CRI minimum H = 80-CRI minimum U = 90-CRI minimum 0 = No minimum Internal code SSSCCC-E-DDD-MM-HK-L-PP SSSCCC-HH-HHHH-GHKLNNNNN Kit code Internal code Color AWT = White CRI specification B = 70-CRI minimum H = 80-CRI minimum U = 90-CRI minimum 0 = No minimum Forward voltage class B=6V D = 12 V Chromaticity bin Color AWT = White © 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, SC3 Technology®, and the Cree LED logo are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC CLD-DS60 REV 10 26 XLAMP ® MK-R LED REFLOW SOLDERING CHARACTERISTICS In testing, Cree LED has found XLamp MK-R LEDs to be compatible with JEDEC J-STD-020C, using the parameters listed below. As a general guideline, Cree LED recommends that users follow the recommended soldering profile provided by the manufacturer of the solder paste used, and therefore it is the lamp or luminaire manufacturer’s responsibility to determine applicable soldering requirements. Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment. tP TP Critical Zone TL to TP Temperature Ramp-up TL tL Tsmax Tsmin Ramp-down ts Preheat 25 t 25˚C to Peak Profile Feature Average Ramp-Up Rate (Tsmax to Tp) IPC/JEDEC J-STD-020C Time Lead-Free Solder 1.2 °C/second Preheat: Temperature Min (Tsmin) 120 °C Preheat: Temperature Max (Tsmax) 170 °C Preheat: Time (tsmin to tsmax) 65-150 seconds Time Maintained Above: Temperature (TL) Time Maintained Above: Time (tL) 217 °C 45-90 seconds Peak/Classification Temperature (Tp) 235 - 245 °C Time Within 5 °C of Actual Peak Temperature (tp) 20-40 seconds Ramp-Down Rate 1 - 6 °C/second Time 25 °C to Peak Temperature 4 minutes max. Note: All temperatures refer to the topside of the package, measured on the package body surface. © 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, SC3 Technology®, and the Cree LED logo are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC CLD-DS60 REV 10 27 XLAMP ® MK-R LED NOTES Measurements The luminous flux, radiant power, chromaticity, forward voltage and CRI measurements in this document are binning specifications only and solely represent product measurements as of the date of shipment. These measurements will change over time based on a number of factors that are not within Cree LED’s control and are not intended or provided as operational specifications for the products. Calculated values are provided for informational purposes only and are not intended or provided as specifications. Pre‑Release Qualification Testing Please read the LED Reliability Overview for details of the qualification process Cree LED applies to ensure long-term reliability for XLamp LEDs and details of Cree LED’s pre-release qualification testing for XLamp LEDs. Lumen Maintenance Cree LED now uses standardized IES LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LED lumen maintenance. For information on the specific LM-80 data sets available for this LED, refer to the public LM-80 results document. Please read the Long-Term Lumen Maintenance application note for more details on Cree LED’s lumen maintenance testing and forecasting. Please read the Thermal Management application note for details on how thermal design, ambient temperature, and drive current affect the LED junction temperature. Moisture Sensitivity Cree LED recommends keeping XLamp LEDs in the provided, resealable moisture-barrier packaging (MBP) until immediately prior to soldering. Unopened MBPs that contain XLamp LEDs do not need special storage for moisture sensitivity. Once the MBP is opened, XLamp MK-R LEDs may be stored as MSL 1 per JEDEC J-STD-033, meaning they have unlimited floor life in conditions of ≤ 30 ºC/85% relative humidity (RH). Regardless of storage condition, Cree LED recommends sealing any unsoldered LEDs in the original MBP. RoHS Compliance The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree LED representative or from the Product Ecology section of the Cree LED website. REACH Compliance REACH substances of very high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA) has published notice of their intent to frequently revise the SVHC listing for the foreseeable future, please contact a Cree LED representative to insure you get the most up-to-date REACH SVHC Declaration. REACH banned substance information (REACH Article 67) is also available upon request. © 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, SC3 Technology®, and the Cree LED logo are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC CLD-DS60 REV 10 28 XLAMP ® MK-R LED NOTES - CONTINUED UL® Recognized Component This product meets the requirements to be considered a UL Recognized Component with Level 4 enclosure consideration. The LED package or a portion thereof has been investigated as a fire and electrical enclosure per ANSI/UL 8750. Vision Advisory WARNING: Do not look at an exposed lamp in operation. Eye injury can result. For more information about LEDs and eye safety, please refer to the LED Eye Safety application note. © 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, SC3 Technology®, and the Cree LED logo are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC CLD-DS60 REV 10 29 XLAMP ® MK-R LED 6 5 MECHANICAL DIMENSIONS NOTICE 4 3 CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION CONTAINED WITHIN ARE THE PROPRIETARY AND CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT OF CREE INC. REV Thermal vias, if present, are not shown on these drawings. All measurements are ±.13 mm unless otherwise indicated. 4.08 7.00 D .73 6 5 4 OPTICAL MODEL ORIGIN 5 NOTICE CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION CONTAINED WITHIN ARE THE PROPRIETARY AND CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT 3 4 3 MAY4NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT OF CREE INC. 7.00 3 2 2 4 3 2 1 1 REVISONS D .70 REVISONS 1 REVISONS REV REV BY DATEBY DATEBY APP'D B B VIEWS SHOW LATEST REVISION VIEWS SHOW LATEST REVISIONDC VIEWSBSHOW LATEST REVISION DC 8/5/13 8/5/13 DC D D NOTCH ADDED D IS ADDED NOTCHTO IS BACKSIDE ADDED TO BACKSIDE DC NOTCH TOISBACKSIDE DC 7/7/14 7/7/14 DC 7/7/14 E E UPDATED VIEWS ALL VIEWS EUPDATED ALL UPDATED VIEWS ALL DC 6/19/15 6/19/15 DC 6/19/15 REV DESCRIPTION DESCRIPTION DESCRIPTION DC APP'D DATE APP'D 8/5/13 R3.25 OPTICAL MODEL ORIGIN 7.00 C 4.08 4.08 4.08 .73 .73 .73 6.70 6.70 6.70 REF. 6.70 REF. .70 .50 .30 6.76 6.70 6.76 C 6.69 6.76 1.06 .50 6.76 REF. 6.76 REF. 6.76 REF. 6.76 REF. 1.06 6.76 REF. Anode 6.99 6.76 REF. C C .70 R 3.25 Anode 6.70 REF. D 6.70 6.79 7.00 6.76 6.70 D D .70 .70 6.70 REF. 6.99 .30 .50 6.70 Side View .73 6.70 .70 .70 .70 .70 .70 4.08 Top View 1.29 C .51 Anode6.79 3.90 6.69 B R 3.25 .70 3.90 3.90 Alternate Bottom View ALTERNATIVE ALTERNATIVE ALTERNATIVE Alternate Bottom ALTERNATIVE ALTERNATIVE ALTERNATIVE 4.59 .70 .70 RECOMMENDED COPPER LAYOUT .25 .70 View .60 .70 .90 .70 B .25 .25 ALTERNA PRIMARY .70 3.90 Bottom View PRIMARY PRIMARYPRIMARY 0 .76 .70 3.37 4.39 .70 RECOMMENDED SOLDER PAD (SOLDER RESIST PATTERN) .25 RECOMMENDED STENCIL OPENINGS .70 ALL DIME 1.29 A B B 1.29 6.76 1.29 1.29 6.76 .25 THIRD ANGLE PROJECTION 6.76 6.76 .25 .25 UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN B MILLIMETERS AND AFTER FINISH. TOLERANCE UNLESS SPECIFIED: .XX ± .25 .XXX ± .125 X° ± .5 ° FOR SHEET METAL PARTS ONLY .X ± 1.5 .XX ± .75 .XXX ± .25 X° ± .5 ° .25 SURFACE FINISH: 6 5 4 3.90 6.70 1.29 1.29 6.70 1.24 A 1.29 6.70 6.70 1.24 RECOMMENDED PCB SOLDER PAD M FIN 1.6 6.70 1.24 Recommended PCB Solder Pad A 3 1.24 1.29 D C UNLESS OTHERWISE SPECIF DIMENSIONS ARE IN MILLIMETERS AND AFTER FIN TOLERANCE UNLESS SPECIF .XX ± .2 .XXX ± .1 X° ± .5 RECOMMENDED STENCIL PATTERN Recommended Stencil Pattern SHADED AREA IS OPENING (Shaded Area Is Open) DRAWN BY DRAWNDATE BY DATE DATE DRAWN BY UNLESS OTHERWISE SPECIFIED UNLESS OTHERWISE SPECIFIED UNLESS OTHERWISE SPECIFIED 11/7/12 11/7/12 11/7/12 D. CRONIN DIMENSIONS ARE IN D. CRONIN DIMENSIONS ARE IN D. CRONIN DIMENSIONS ARE IN CHECKDATE CHECK DATE DATE MILLIMETERS AND AFTER FINISH. CHECK MILLIMETERS AND AFTER FINISH. MILLIMETERS AND AFTER FINISH. RECOMMENDED STENCIL PATTERN RECOMMENDED STENCIL PATTERN RECOMMENDED STENCIL PATTERN TOLERANCE UNLESS SPECIFIED: TOLERANCE UNLESS SPECIFIED: TOLERANCE UNLESS SPECIFIED: ± .25 .XX ± .25 APPROVED DATE SHADED AREA IS OPENING .XX ± .25.XX APPROVED DATE SHADED AREA IS OPENING APPROVED DATE SHADED AREA IS OPENING TITLE .XXX ± .125 ® ® 3 TITLE .XXX ± Cree .125 logo, XLamp TITLE ® .XXX ± notice. .125 © 2012-2023 Cree LED. The information in this document is subject to change without Cree , the , EasyWhite , SC ± .5X°° ± .5 ° X° ± .5 X°° PROJECTION THIRD ANGLE Technology®, and the Cree LED logo are registered trademarks ofANGLE Cree LED. UL®PROJECTION and the FOR ULSHEET logoMETAL are registered trademarks of UL LLC THIRD ANGLETHIRD PROJECTION MATERIAL MATERIAL MATERIAL FORPARTS SHEET ONLY METAL PARTS ONLY FOR SHEET METAL PARTS ONLY 1.5 .X ± 1.5 .X ± 1.5.X 5 ± 6 4 NO.SIZE DRAWING NO. SIZE DRAWING SIZE ± .75 .XX ± .75 .XX ± .75.XX .25 FINAL PROTECTIVE FINISH .XXX ± FINISH .25 FINAL PROTECTIVE FINISH .XXX ± .25.XXX ± FINAL PROTECTIVE ± .5X°° ± .5 ° X° ± .5 X°° 4600 Silicon Drive 4600 Silicon Drive4600 Silicon Drive THIRD ANGLE Durham, N.C 27703 Durham, PROJECTION N.C 27703 Durham, N.C 27703 Phone (919) 313-5300 Phone (919) 313-5300 Phone (919) 313-5300 Fax (919) 313-5558 Fax (919) 313-5558Fax (919) 313-5558 A A CLD-DS60 REV 10 MKR Marketing Spec Spec MKR Marketing MKR Marketing Spec C C SCALE DRAWING NO. REV. 3 REV. REV. 2610-00031 2610-00031 C 2610-00031 E E SCALE SHEET OF SHEET E OF A FOR SHEET METAL PARTS O .X ± 1 .XX ± .7 .XXX ± .2 X° ± .5 30 SURFACE FINISH: 1.6 XLAMP ® MK-R LED TAPE AND REEL All Cree LED carrier tapes conform to EIA-481D, Automated Component Handling Systems Standard. All dimensions in mm All dimensions are ±.13 mm unless otherwise indicated. Po T E Do Bo R P2 W A Anode side A F P1 B D1 "H" Ko B-B SECTION Bo (on a place in the bottom of the corner radii) Ao (on a place in the bottom of the corner radii) R "I" Ao Item Dim. Ao ITEM 7.40 Dim. Bo Ao 7.40 7.40 DETAIL"H" DETAIL"I" A-A SECTION Ko Bo Po KoP1 P2 Po 4.31 7.40 4.00 12.00 4.31 2.00 4.00 T P1 E 0.36 12.00 1.75 ITEM F Do D1 W R Dim. 7.50 1.50 1.50 16.00 5deg P2 F 2.00 7.50 TDo 1.50 0.36 D1E 1.50 1.75 W R 16.00 5° NOTICE 1) All Cree LED carrier tapes conform to EIA-481D, Automated Component handling Systems Standard 2) Measurement tolerances unless indicated otherwise: .xx = ±.15 mm 2402-M023 MKR © 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, SC3 Technology®, and the Cree LED logo are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC CLD-DS60 REV 10 31 XLAMP ® MK-R LED TAPE AND REEL - CONTINUED Feed Direction END START Trailer Loaded Pockets Leader Min. 160 mm empty pockets sealed with tape 1000 Lamps Min. 400 mm empty pockets with min. 100 mm sealed Feed Direction Cover Tape Pocket Tape 13 mm 13” © 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, SC3 Technology®, and the Cree LED logo are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC CLD-DS60 REV 10 32 XLAMP ® MK-R LED PACKAGING © 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, SC3 Technology®, and the Cree LED logo are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC CLD-DS60 REV 10 33