S-808xxC Series
www.ablic.com
www.ablicinc.com
SUPER-SMALL PACKAGE HIGH-PRECISION
VOLTAGE DETECTOR
© ABLIC Inc., 2001-2015
Rev.6.2_02
The S-808xxC series is a series of high-precision voltage detectors developed using CMOS process. The
detection voltage is fixed internally with an accuracy of 2.0%. Two output forms, Nch open-drain and CMOS
output, are available. Super-low current consumption and miniature package lineup can meet demand from the
portable device applications.
Features
Super-low current consumption
1.3 A typ. (detection voltage1.4 V, at VDD 1.5 V)
0.8 A typ. (detection voltage1.5 V, at VDD 3.5 V)
High-precision detection voltage 2.0%
Operating voltage range
0.65 V to 5.0 V (detection voltage1.4 V)
0.95 V to 10.0 V (detection voltage1.5 V)
Hysteresis characteristics
5% typ.
Detection voltage
0.8 V to 6.0 V (0.1 V step)
Output form
Nch open-drain output (Active Low)
CMOS output (Active Low)
Lead-free, Sn 100%, halogen-free*1
*1. Refer to “ Product Name Structure” for details.
Applications
Battery checkers
Power failure detectors
Power monitor for portable equipments such as pagers, calculators, electronic notebooks and remote
controllers.
Constant voltage power monitor for cameras, video equipments and communication devices.
Power monitor for microcomputers and reset for CPUs.
Packages
SC-82AB
SOT-23-5
SOT-89-3
SNT-4A
TO-92
1
SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR
S-808xxC Series
Rev.6.2_02
Block Diagrams
1. Nch Open-drain Output Products
VDD
OUT
*1
*1
VREF
VSS
*1. Parasitic diode
Figure 1
2. CMOS Output Products
VDD
*1
*1
OUT
*1
VREF
VSS
*1. Parasitic diode
Figure 2
2
SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR
S-808xxC Series
Rev.6.2_02
Product Name Structure
The detection voltage, output form and packages for S-808xxC Series can be selected at the user's request.
Refer to the “1. Product Name” for the construction of the product name, “2. Packages” regarding the
package drawings and “3. Product Name List” for the full product names.
1. Product Name
1-1. SC-82AB, SOT-23-5, SOT-89-3
S - 808xx
C
x
xx
-
xxx
T2
x
Environmental code
U: Lead-free (Sn 100%), halogen-free
G: Lead-free (for details, please contact our sales office)
IC direction in tape specifications
Product code
*1
*2
Package code
NB: SC-82AB
MC: SOT-23-5
UA: SOT-89-3
Output form
N: Nch open-drain output (Active Low)
L: CMOS output (Active Low)
Detection voltage value
08 to 60
(e.g. When the detection voltage is 0.8 V,
it is expressed as 08.)
*1. Refer to the tape specifications at the end of this book.
*2. Refer to the Table 1 and 3 in the “3. Product Name List”
1-2. SNT-4A
S - 808xx
C
x
PF
-
xxx
TF
U
Environmental code
U: Lead-free (Sn 100%), halogen-free
IC direction in tape specifications*1
Product code
*2
Package code
Output form
N: Nch open-drain output (Active Low)
L: CMOS output (Active Low)
Detection voltage value
08 to 60
(e.g. When the detection voltage is 0.8 V,
it is expressed as 08.)
*1. Refer to the tape specifications at the end of this book.
*2. Refer to the Table 2 and 4 in the “3. Product Name List”
3
SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR
S-808xxC Series
Rev.6.2_02
1-3. TO-92
S - 808xx
C
xY-x
2
-U
Environmental code
U: Lead-free (Sn 100%), halogen-free
Packing form
B: Bulk
Z: Tape and ammo
Package code
Y: TO-92
Output form
N: Nch open-drain output (Active Low)
L: CMOS output (Active Low)
Detection voltage value
15 to 60
(e.g. When the detection voltage is 1.5 V,
it is expressed as 15.)
2. Packages
Package name
SC-82AB
Package
NP004-A-P-SD
SOT-23-5
MP005-A-P-SD
SOT-89-3
UP003-A-P-SD
SNT-4A
PF004-A-P-SD
TO-92 (Bulk)
YS003-D-P-SD
TO-92 (Tape and ammo) YZ003-E-P-SD
4
Tape
NP004-A-C-SD
NP004-A-C-S1
MP005-A-C-SD
UP003-A-C-SD
PF004-A-C-SD
YZ003-E-C-SD
Drawing code
Reel
Zigzag
Land
NP004-A-R-SD
MP005-A-R-SD
UP003-A-R-SD
PF004-A-R-SD
YZ003-E-Z-SD
PF004-A-L-SD
Rev.6.2_02
SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR
S-808xxC Series
3. Product Name List
3-1. Nch Open-drain Output Products
Table 1 (1/2)
Detection
voltage range
0.8 V2.0 %
0.9 V2.0 %
1.0 V2.0 %
1.1 V2.0 %
1.2 V2.0 %
1.3 V2.0 %
1.4 V2.0 %
1.5 V2.0 %
1.6 V2.0 %
1.7 V2.0 %
1.8 V2.0 %
1.9 V2.0 %
2.0 V2.0 %
2.1 V2.0 %
2.2 V2.0 %
2.3 V2.0 %
2.4 V2.0 %
2.4 V typ.
2.5 V2.0 %
2.6 V2.0 %
2.7 V2.0 %
2.8 V2.0 %
2.9 V2.0 %
3.0 V2.0 %
3.1 V2.0 %
3.2 V2.0 %
3.3 V2.0 %
3.4 V2.0 %
3.5 V2.0 %
3.6 V2.0 %
3.7 V2.0 %
3.8 V2.0 %
3.9 V2.0 %
Hysteresis width
(Typ.)
0.034 V
0.044 V
0.054 V
0.064 V
0.073 V
0.083 V
0.093 V
0.075 V
0.080 V
0.085 V
0.090 V
0.095 V
0.100 V
0.105 V
0.110 V
0.115 V
0.120 V
4.4 0.1 V*1
0.125 V
0.130 V
0.135 V
0.140 V
0.145 V
0.150 V
0.155 V
0.160 V
0.165 V
0.170 V
0.175 V
0.180 V
0.185 V
0.190 V
0.195 V
SC-82AB
SOT-23-5
SOT-89-3
S-80808CNNB-B9MT2x
S-80809CNNB-B9NT2x
S-80810CNNB-B9OT2x
S-80811CNNB-B9PT2x
S-80812CNNB-B9QT2x
S-80813CNNB-B9RT2x
S-80814CNNB-B9ST2x
S-80815CNNB-B8AT2x
S-80816CNNB-B8BT2x
S-80817CNNB-B8CT2x
S-80818CNNB-B8DT2x
S-80819CNNB-B8ET2x
S-80820CNNB-B8FT2x
S-80821CNNB-B8GT2x
S-80822CNNB-B8HT2x
S-80823CNNB-B8IT2x
S-80824CNNB-B8JT2x
S-80825CNNB-B8KT2x
S-80826CNNB-B8LT2x
S-80827CNNB-B8MT2x
S-80828CNNB-B8NT2x
S-80829CNNB-B8OT2x
S-80830CNNB-B8PT2x
S-80831CNNB-B8QT2x
S-80832CNNB-B8RT2x
S-80833CNNB-B8ST2x
S-80834CNNB-B8TT2x
S-80835CNNB-B8UT2x
S-80836CNNB-B8VT2x
S-80837CNNB-B8WT2x
S-80838CNNB-B8XT2x
S-80839CNNB-B8YT2x
S-80815CNMC-B8AT2x
S-80816CNMC-B8BT2x
S-80817CNMC-B8CT2x
S-80818CNMC-B8DT2x
S-80819CNMC-B8ET2x
S-80820CNMC-B8FT2x
S-80821CNMC-B8GT2x
S-80822CNMC-B8HT2x
S-80823CNMC-B8IT2x
S-80824CNMC-B8JT2x
S-80825CNMC-B8KT2x
S-80826CNMC-B8LT2x
S-80827CNMC-B8MT2x
S-80828CNMC-B8NT2x
S-80829CNMC-B8OT2x
S-80830CNMC-B8PT2x
S-80831CNMC-B8QT2x
S-80832CNMC-B8RT2x
S-80833CNMC-B8ST2x
S-80834CNMC-B8TT2x
S-80835CNMC-B8UT2x
S-80836CNMC-B8VT2x
S-80837CNMC-B8WT2x
S-80838CNMC-B8XT2x
S-80839CNMC-B8YT2x
S-80815CNUA-B8AT2x
S-80816CNUA-B8BT2x
S-80817CNUA-B8CT2x
S-80818CNUA-B8DT2x
S-80819CNUA-B8ET2x
S-80820CNUA-B8FT2x
S-80821CNUA-B8GT2x
S-80822CNUA-B8HT2x
S-80823CNUA-B8IT2x
S-80824CNUA-B8JT2x
S-80824KNUA-D2BT2x*2
S-80825CNUA-B8KT2x
S-80826CNUA-B8LT2x
S-80827CNUA-B8MT2x
S-80828CNUA-B8NT2x
S-80829CNUA-B8OT2x
S-80830CNUA-B8PT2x
S-80831CNUA-B8QT2x
S-80832CNUA-B8RT2x
S-80833CNUA-B8ST2x
S-80834CNUA-B8TT2x
S-80835CNUA-B8UT2x
S-80836CNUA-B8VT2x
S-80837CNUA-B8WT2x
S-80838CNUA-B8XT2x
S-80839CNUA-B8YT2x
5
SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR
S-808xxC Series
Rev.6.2_02
Table 1 (2/2)
Detection
Hysteresis width
SC-82AB
SOT-23-5
SOT-89-3
voltage range
(Typ.)
0.200 V
S-80840CNNB-B8ZT2x
S-80840CNMC-B8ZT2x
S-80840CNUA-B8ZT2x
4.0 V2.0 %
0.205 V
S-80841CNNB-B82T2x
S-80841CNMC-B82T2x
S-80841CNUA-B82T2x
4.1 V2.0 %
0.210 V
S-80842CNNB-B83T2x
S-80842CNMC-B83T2x
S-80842CNUA-B83T2x
4.2 V2.0 %
0.215 V
S-80843CNNB-B84T2x
S-80843CNMC-B84T2x
S-80843CNUA-B84T2x
4.3 V2.0 %
0.220 V
S-80844CNNB-B85T2x
S-80844CNMC-B85T2x
S-80844CNUA-B85T2x
4.4 V2.0 %
0.225 V
S-80845CNNB-B86T2x
S-80845CNMC-B86T2x
S-80845CNUA-B86T2x
4.5 V2.0 %
0.230
V
S-80846CNNB-B87T2x
S-80846CNMC-B87T2x
S-80846CNUA-B87T2x
4.6 V2.0 %
0.10 V max.
S-80846KNUA-D2CT2x*3
4.6 V 0.10 V
0.235 V
S-80847CNNB-B88T2x
S-80847CNMC-B88T2x
S-80847CNUA-B88T2x
4.7 V2.0 %
0.240 V
S-80848CNNB-B89T2x
S-80848CNMC-B89T2x
S-80848CNUA-B89T2x
4.8 V2.0 %
0.245 V
S-80849CNNB-B9AT2x
S-80849CNMC-B9AT2x
S-80849CNUA-B9AT2x
4.9 V2.0 %
0.250 V
S-80850CNNB-B9BT2x
S-80850CNMC-B9BT2x
S-80850CNUA-B9BT2x
5.0 V2.0 %
0.255 V
S-80851CNNB-B9CT2x
S-80851CNMC-B9CT2x
S-80851CNUA-B9CT2x
5.1 V2.0 %
0.260 V
S-80852CNNB-B9DT2x
S-80852CNMC-B9DT2x
S-80852CNUA-B9DT2x
5.2 V2.0 %
0.265 V
S-80853CNNB-B9ET2x
S-80853CNMC-B9ET2x
S-80853CNUA-B9ET2x
5.3 V2.0 %
0.270 V
S-80854CNNB-B9FT2x
S-80854CNMC-B9FT2x
S-80854CNUA-B9FT2x
5.4 V2.0 %
0.275 V
S-80855CNNB-B9GT2x
S-80855CNMC-B9GT2x
S-80855CNUA-B9GT2x
5.5 V2.0 %
0.280 V
S-80856CNNB-B9HT2x
S-80856CNMC-B9HT2x
S-80856CNUA-B9HT2x
5.6 V2.0 %
0.285 V
S-80857CNNB-B9IT2x
S-80857CNMC-B9IT2x
S-80857CNUA-B9IT2x
5.7 V2.0 %
0.290 V
S-80858CNNB-B9JT2x
S-80858CNMC-B9JT2x
S-80858CNUA-B9JT2x
5.8 V2.0 %
0.295 V
S-80859CNNB-B9KT2x
S-80859CNMC-B9KT2x
S-80859CNUA-B9KT2x
5.9 V2.0 %
0.300 V
S-80860CNNB-B9LT2x
S-80860CNMC-B9LT2x
S-80860CNUA-B9LT2x
6.0 V2.0 %
*1. Describes the release voltage.
*2. Refer to the Table 18 in “ Electricala Characteristics for Customized Products” for electrical characteristics.
*3. Refer to the Table 20 in “ Electricala Characteristics for Customized Products” for electrical characteristics
Remark 1. x: G or U
2. Please select products of environmental code = U for Sn 100%, halogen-free products.
6
Rev.6.2_02
SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR
S-808xxC Series
Table 2 (1/2)
Detection
voltage range
0.8 V2.0 %
0.9 V2.0 %
1.0 V2.0 %
1.1 V2.0 %
1.2 V2.0 %
1.3 V2.0 %
1.4 V2.0 %
1.5 V2.0 %
1.6 V2.0 %
1.7 V2.0 %
1.8 V2.0 %
1.9 V2.0 %
2.0 V2.0 %
2.1 V2.0 %
2.2 V2.0 %
2.3 V2.0 %
2.4 V2.0 %
2.4 V typ.
2.5 V2.0 %
2.6 V2.0 %
2.7 V2.0 %
2.8 V2.0 %
2.9 V2.0 %
3.0 V2.0 %
3.1 V2.0 %
3.2 V2.0 %
3.3 V2.0 %
3.4 V2.0 %
3.5 V2.0 %
3.6 V2.0 %
3.7 V2.0 %
3.8 V2.0 %
3.9 V2.0 %
4.0 V2.0 %
4.1 V2.0 %
4.2 V2.0 %
4.3 V2.0 %
4.4 V2.0 %
4.5 V2.0 %
4.6 V2.0 %
4.6 V0.10 V
4.7 V2.0 %
4.8 V2.0 %
4.9 V2.0 %
5.0 V2.0 %
5.1 V2.0 %
Hysteresis width
(Typ.)
0.034 V
0.044 V
0.054 V
0.064 V
0.073 V
0.083 V
0.093 V
0.075 V
0.080 V
0.085 V
0.090 V
0.095 V
0.100 V
0.105 V
0.110 V
0.115 V
0.120 V
4.4 0.1 V*2
0.125 V
0.130 V
0.135 V
0.140 V
0.145 V
0.150 V
0.155 V
0.160 V
0.165 V
0.170 V
0.175 V
0.180 V
0.185 V
0.190 V
0.195 V
0.200 V
0.205 V
0.210 V
0.215 V
0.220 V
0.225 V
0.230 V
0.10 V max.
0.235 V
0.240 V
0.245 V
0.250 V
0.255 V
SNT-4A
TO-92*1
S-80808CNPF-B9MTFU
S-80809CNPF-B9NTFU
S-80810CNPF-B9OTFU
S-80811CNPF-B9PTFU
S-80812CNPF-B9QTFU
S-80813CNPF-B9RTFU
S-80814CNPF-B9STFU
S-80815CNPF-B8ATFU
S-80816CNPF-B8BTFU
S-80817CNPF-B8CTFU
S-80818CNPF-B8DTFU
S-80819CNPF-B8ETFU
S-80820CNPF-B8FTFU
S-80821CNPF-B8GTFU
S-80822CNPF-B8HTFU
S-80823CNPF-B8ITFU
S-80824CNPF-B8JTFU
S-80825CNPF-B8KTFU
S-80826CNPF-B8LTFU
S-80827CNPF-B8MTFU
S-80828CNPF-B8NTFU
S-80829CNPF-B8OTFU
S-80830CNPF-B8PTFU
S-80831CNPF-B8QTFU
S-80832CNPF-B8RTFU
S-80833CNPF-B8STFU
S-80834CNPF-B8TTFU
S-80835CNPF-B8UTFU
S-80836CNPF-B8VTFU
S-80837CNPF-B8WTFU
S-80838CNPF-B8XTFU
S-80839CNPF-B8YTFU
S-80840CNPF-B8ZTFU
S-80841CNPF-B82TFU
S-80842CNPF-B83TFU
S-80843CNPF-B84TFU
S-80844CNPF-B85TFU
S-80845CNPF-B86TFU
S-80846CNPF-B87TFU
S-80847CNPF-B88TFU
S-80848CNPF-B89TFU
S-80849CNPF-B9ATFU
S-80850CNPF-B9BTFU
S-80851CNPF-B9CTFU
S-80815CNY-n2-U
S-80816CNY-n2-U
S-80817CNY-n2-U
S-80818CNY-n2-U
S-80819CNY-n2-U
S-80820CNY-n2-U
S-80821CNY-n2-U
S-80822CNY-n2-U
S-80823CNY-n2-U
S-80824CNY-n2-U
S-80824KNY-n2-U*3
S-80825CNY-n2-U
S-80826CNY-n2-U
S-80827CNY-n2-U
S-80828CNY-n2-U
S-80829CNY-n2-U
S-80830CNY-n2-U
S-80831CNY-n2-U
S-80832CNY-n2-U
S-80833CNY-n2-U
S-80834CNY-n2-U
S-80835CNY-n2-U
S-80836CNY-n2-U
S-80837CNY-n2-U
S-80838CNY-n2-U
S-80839CNY-n2-U
S-80840CNY-n2-U
S-80841CNY-n2-U
S-80842CNY-n2-U
S-80843CNY-n2-U
S-80844CNY-n2-U
S-80845CNY-n2-U
S-80846CNY-n2-U
S-80846KNY-n2-U*4
S-80847CNY-n2-U
S-80848CNY-n2-U
S-80849CNY-n2-U
S-80850CNY-n2-U
S-80851CNY-n2-U
7
SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR
S-808xxC Series
Rev.6.2_02
Table 2 (2/2)
Detection
Hysteresis width
SNT-4A
TO-92*1
voltage range
(Typ.)
0.260 V
S-80852CNPF-B9DTFU
S-80852CNY-n2-U
5.2 V2.0 %
0.265 V
S-80853CNPF-B9ETFU
S-80853CNY-n2-U
5.3 V2.0 %
0.270 V
S-80854CNPF-B9FTFU
S-80854CNY-n2-U
5.4 V2.0 %
0.275 V
S-80855CNPF-B9GTFU
S-80855CNY-n2-U
5.5 V2.0 %
0.280 V
S-80856CNPF-B9HTFU
S-80856CNY-n2-U
5.6 V2.0 %
0.285 V
S-80857CNPF-B9ITFU
S-80857CNY-n2-U
5.7 V2.0 %
0.290 V
S-80858CNPF-B9JTFU
S-80858CNY-n2-U
5.8 V2.0 %
0.295 V
S-80859CNPF-B9KTFU
S-80859CNY-n2-U
5.9 V2.0 %
0.300 V
S-80860CNPF-B9LTFU
S-80860CNY-n2-U
6.0 V2.0 %
*1. n changes according to the packing form in TO-92. B: Bulk, Z: Tape and ammo
*2. Describes the release voltage.
*3. Refer to the Table 18 in “ Electricala Characteristics for Customized Products” for electrical characteristics.
*4. Refer to the Table 20 in “ Electricala Characteristics for Customized Products” for electrical characteristics.
8
Rev.6.2_02
SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR
S-808xxC Series
3-2. CMOS Output Products
Table 3 (1/2)
Detection
voltage range
0.8 V2.0 %
0.9 V2.0 %
1.0 V2.0 %
1.1 V2.0 %
1.2 V2.0 %
1.3 V2.0 %
1.4 V2.0 %
1.5 V2.0 %
1.6 V2.0 %
1.7 V2.0 %
1.8 V2.0 %
1.9 V2.0 %
2.0 V2.0 %
2.1 V2.0 %
2.2 V2.0 %
2.3 V2.0 %
2.4 V2.0 %
2.5 V2.0 %
2.6 V2.0 %
2.7 V2.0 %
2.8 V2.0 %
2.9 V2.0 %
3.0 V2.0 %
3.1 V2.0 %
3.2 V2.0 %
3.3 V2.0 %
3.4 V2.0 %
3.5 V2.0 %
3.6 V2.0 %
3.7 V2.0 %
3.8 V2.0 %
3.9 V2.0 %
4.0 V2.0 %
4.1 V2.0 %
4.2 V2.0 %
4.3 V2.0 %
4.4 V2.0 %
4.45 V typ.
4.5 V2.0 %
4.6 V2.0 %
4.7 V2.0 %
4.8 V2.0 %
4.9 V2.0 %
5.0 V2.0 %
5.1 V2.0 %
Hysteresis width
(Typ.)
0.034 V
0.044 V
0.054 V
0.064 V
0.073 V
0.083 V
0.093 V
0.075 V
0.080 V
0.085 V
0.090 V
0.095 V
0.100 V
0.105 V
0.110 V
0.115 V
0.120 V
0.125 V
0.130 V
0.135 V
0.140 V
0.145 V
0.150 V
0.155 V
0.160 V
0.165 V
0.170 V
0.175 V
0.180 V
0.185 V
0.190 V
0.195 V
0.200 V
0.205 V
0.210 V
0.215 V
0.220 V
4.70 V max.*1
0.225 V
0.230 V
0.235 V
0.240 V
0.245 V
0.250 V
0.255 V
SC-82AB
SOT-23-5
SOT-89-3
S-80808CLNB-B7MT2x
S-80809CLNB-B7NT2x
S-80810CLNB-B7OT2x
S-80811CLNB-B7PT2x
S-80812CLNB-B7QT2x
S-80813CLNB-B7RT2x
S-80814CLNB-B7ST2x
S-80815CLNB-B6AT2x
S-80816CLNB-B6BT2x
S-80817CLNB-B6CT2x
S-80818CLNB-B6DT2x
S-80819CLNB-B6ET2x
S-80820CLNB-B6FT2x
S-80821CLNB-B6GT2x
S-80822CLNB-B6HT2x
S-80823CLNB-B6IT2x
S-80824CLNB-B6JT2x
S-80825CLNB-B6KT2x
S-80826CLNB-B6LT2x
S-80827CLNB-B6MT2x
S-80828CLNB-B6NT2x
S-80829CLNB-B6OT2x
S-80830CLNB-B6PT2x
S-80831CLNB-B6QT2x
S-80832CLNB-B6RT2x
S-80833CLNB-B6ST2x
S-80834CLNB-B6TT2x
S-80835CLNB-B6UT2x
S-80836CLNB-B6VT2x
S-80837CLNB-B6WT2x
S-80838CLNB-B6XT2x
S-80839CLNB-B6YT2x
S-80840CLNB-B6ZT2x
S-80841CLNB-B62T2x
S-80842CLNB-B63T2x
S-80843CLNB-B64T2x
S-80844CLNB-B65T2x
S-80845CLNB-B66T2x
S-80846CLNB-B67T2x
S-80847CLNB-B68T2x
S-80848CLNB-B69T2x
S-80849CLNB-B7AT2x
S-80850CLNB-B7BT2x
S-80851CLNB-B7CT2x
S-80815CLMC-B6AT2x
S-80816CLMC-B6BT2x
S-80817CLMC-B6CT2x
S-80818CLMC-B6DT2x
S-80819CLMC-B6ET2x
S-80820CLMC-B6FT2x
S-80821CLMC-B6GT2x
S-80822CLMC-B6HT2x
S-80823CLMC-B6IT2x
S-80824CLMC-B6JT2x
S-80825CLMC-B6KT2x
S-80826CLMC-B6LT2x
S-80827CLMC-B6MT2x
S-80828CLMC-B6NT2x
S-80829CLMC-B6OT2x
S-80830CLMC-B6PT2x
S-80831CLMC-B6QT2x
S-80832CLMC-B6RT2x
S-80833CLMC-B6ST2x
S-80834CLMC-B6TT2x
S-80835CLMC-B6UT2x
S-80836CLMC-B6VT2x
S-80837CLMC-B6WT2x
S-80838CLMC-B6XT2x
S-80839CLMC-B6YT2x
S-80840CLMC-B6ZT2x
S-80841CLMC-B62T2x
S-80842CLMC-B63T2x
S-80843CLMC-B64T2x
S-80844CLMC-B65T2x
S-80845CLMC-B66T2x
S-80846CLMC-B67T2x
S-80847CLMC-B68T2x
S-80848CLMC-B69T2x
S-80849CLMC-B7AT2x
S-80850CLMC-B7BT2x
S-80851CLMC-B7CT2x
S-80815CLUA-B6AT2x
S-80816CLUA-B6BT2x
S-80817CLUA-B6CT2x
S-80818CLUA-B6DT2x
S-80819CLUA-B6ET2x
S-80820CLUA-B6FT2x
S-80821CLUA-B6GT2x
S-80822CLUA-B6HT2x
S-80823CLUA-B6IT2x
S-80824CLUA-B6JT2x
S-80825CLUA-B6KT2x
S-80826CLUA-B6LT2x
S-80827CLUA-B6MT2x
S-80828CLUA-B6NT2x
S-80829CLUA-B6OT2x
S-80830CLUA-B6PT2x
S-80831CLUA-B6QT2x
S-80832CLUA-B6RT2x
S-80833CLUA-B6ST2x
S-80834CLUA-B6TT2x
S-80835CLUA-B6UT2x
S-80836CLUA-B6VT2x
S-80837CLUA-B6WT2x
S-80838CLUA-B6XT2x
S-80839CLUA-B6YT2x
S-80840CLUA-B6ZT2x
S-80841CLUA-B62T2x
S-80842CLUA-B63T2x
S-80843CLUA-B64T2x
S-80844CLUA-B65T2x
S-80844KLUA-D2AT2x*2
S-80845CLUA-B66T2x
S-80846CLUA-B67T2x
S-80847CLUA-B68T2x
S-80848CLUA-B69T2x
S-80849CLUA-B7AT2x
S-80850CLUA-B7BT2x
S-80851CLUA-B7CT2x
9
SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR
S-808xxC Series
Rev.6.2_02
Table 3 (2/2)
Detection
Hysteresis width
SC-82AB
SOT-23-5
SOT-89-3
voltage range
(Typ.)
0.260 V
S-80852CLNB-B7DT2x
S-80852CLMC-B7DT2x
S-80852CLUA-B7DT2x
5.2 V2.0 %
0.265 V
S-80853CLNB-B7ET2x
S-80853CLMC-B7ET2x
S-80853CLUA-B7ET2x
5.3 V2.0 %
0.270 V
S-80854CLNB-B7FT2x
S-80854CLMC-B7FT2x
S-80854CLUA-B7FT2x
5.4 V2.0 %
0.275 V
S-80855CLNB-B7GT2x
S-80855CLMC-B7GT2x
S-80855CLUA-B7GT2x
5.5 V2.0 %
0.280 V
S-80856CLNB-B7HT2x
S-80856CLMC-B7HT2x
S-80856CLUA-B7HT2x
5.6 V2.0 %
0.285
V
S-80857CLNB-B7IT2x
S-80857CLMC-B7IT2x
S-80857CLUA-B7IT2x
5.7 V2.0 %
0.290 V
S-80858CLNB-B7JT2x
S-80858CLMC-B7JT2x
S-80858CLUA-B7JT2x
5.8 V2.0 %
0.295 V
S-80859CLNB-B7KT2x
S-80859CLMC-B7KT2x
S-80859CLUA-B7KT2x
5.9 V2.0 %
0.300 V
S-80860CLNB-B7LT2x
S-80860CLMC-B7LT2x
S-80860CLUA-B7LT2x
6.0 V2.0 %
*1. Describes the release voltage.
*2. Refer to the Table 19 in “ Electricala Characteristics for Customized Products” for electrical characteristics.
Remark 1. x: G or U
2. Please select products of environmental code = U for Sn 100%, halogen-free products.
Table 4 (1/2)
Detection
voltage range
0.8 V2.0 %
0.9 V2.0 %
1.0 V2.0 %
1.1 V2.0 %
1.2 V2.0 %
1.3 V2.0 %
1.4 V2.0 %
1.5 V2.0 %
1.6 V2.0 %
1.7 V2.0 %
1.8 V2.0 %
1.9 V2.0 %
2.0 V2.0 %
2.1 V2.0 %
2.2 V2.0 %
2.3 V2.0 %
2.4 V2.0 %
2.5 V2.0 %
2.6 V2.0 %
2.7 V2.0 %
2.8 V2.0 %
2.9 V2.0 %
3.0 V2.0 %
3.1 V2.0 %
3.2 V2.0 %
3.3 V2.0 %
3.4 V2.0 %
3.5 V2.0 %
3.6 V2.0 %
3.7 V2.0 %
3.8 V2.0 %
10
Hysteresis width
(Typ.)
0.034 V
0.044 V
0.054 V
0.064 V
0.073 V
0.083 V
0.093 V
0.075 V
0.080 V
0.085 V
0.090 V
0.095 V
0.100 V
0.105 V
0.110 V
0.115 V
0.120 V
0.125 V
0.130 V
0.135 V
0.140 V
0.145 V
0.150 V
0.155 V
0.160 V
0.165 V
0.170 V
0.175 V
0.180 V
0.185 V
0.190 V
SNT-4A
TO-92*1
S-80808CLPF-B7MTFU
S-80809CLPF-B7NTFU
S-80810CLPF-B7OTFU
S-80811CLPF-B7PTFU
S-80812CLPF-B7QTFU
S-80813CLPF-B7RTFU
S-80814CLPF-B7STFU
S-80815CLPF-B6ATFU
S-80816CLPF-B6BTFU
S-80817CLPF-B6CTFU
S-80818CLPF-B6DTFU
S-80819CLPF-B6ETFU
S-80820CLPF-B6FTFU
S-80821CLPF-B6GTFU
S-80822CLPF-B6HTFU
S-80823CLPF-B6ITFU
S-80824CLPF-B6JTFU
S-80825CLPF-B6KTFU
S-80826CLPF-B6LTFU
S-80827CLPF-B6MTFU
S-80828CLPF-B6NTFU
S-80829CLPF-B6OTFU
S-80830CLPF-B6PTFU
S-80831CLPF-B6QTFU
S-80832CLPF-B6RTFU
S-80833CLPF-B6STFU
S-80834CLPF-B6TTFU
S-80835CLPF-B6UTFU
S-80836CLPF-B6VTFU
S-80837CLPF-B6WTFU
S-80838CLPF-B6XTFU
S-80815CLY-n2-U
S-80816CLY-n2-U
S-80817CLY-n2-U
S-80818CLY-n2-U
S-80819CLY-n2-U
S-80820CLY-n2-U
S-80821CLY-n2-U
S-80822CLY-n2-U
S-80823CLY-n2-U
S-80824CLY-n2-U
S-80825CLY-n2-U
S-80826CLY-n2-U
S-80827CLY-n2-U
S-80828CLY-n2-U
S-80829CLY-n2-U
S-80830CLY-n2-U
S-80831CLY-n2-U
S-80832CLY-n2-U
S-80833CLY-n2-U
S-80834CLY-n2-U
S-80835CLY-n2-U
S-80836CLY-n2-U
S-80837CLY-n2-U
S-80838CLY-n2-U
Rev.6.2_02
SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR
S-808xxC Series
Table 4 (2/2)
Detection
Hysteresis width
SNT-4A
TO-92*1
voltage range
(Typ.)
0.195 V
S-80839CLPF-B6YTFU
S-80839CLY-n2-U
3.9 V2.0 %
0.200 V
S-80840CLPF-B6ZTFU
S-80840CLY-n2-U
4.0 V2.0 %
0.205 V
S-80841CLPF-B62TFU
S-80841CLY-n2-U
4.1 V2.0 %
0.210 V
S-80842CLPF-B63TFU
S-80842CLY-n2-U
4.2 V2.0 %
0.215 V
S-80843CLPF-B64TFU
S-80843CLY-n2-U
4.3 V2.0 %
0.220 V
S-80844CLPF-B65TFU
S-80844CLY-n2-U
4.4 V2.0 %
*2
4.45 V typ.
4.70 V max.
S-80844KLY-n2-U*3
0.225 V
S-80845CLPF-B66TFU
S-80845CLY-n2-U
4.5 V2.0 %
0.230 V
S-80846CLPF-B67TFU
S-80846CLY-n2-U
4.6 V2.0 %
0.235 V
S-80847CLPF-B68TFU
S-80847CLY-n2-U
4.7 V2.0 %
0.240 V
S-80848CLPF-B69TFU
S-80848CLY-n2-U
4.8 V2.0 %
0.245 V
S-80849CLPF-B7ATFU
S-80849CLY-n2-U
4.9 V2.0 %
0.250 V
S-80850CLPF-B7BTFU
S-80850CLY-n2-U
5.0 V2.0 %
0.255 V
S-80851CLPF-B7CTFU
S-80851CLY-n2-U
5.1 V2.0 %
0.260 V
S-80852CLPF-B7DTFU
S-80852CLY-n2-U
5.2 V2.0 %
0.265 V
S-80853CLPF-B7ETFU
S-80853CLY-n2-U
5.3 V2.0 %
0.270 V
S-80854CLPF-B7FTFU
S-80854CLY-n2-U
5.4 V2.0 %
0.275 V
S-80855CLPF-B7GTFU
S-80855CLY-n2-U
5.5 V2.0 %
0.280 V
S-80856CLPF-B7HTFU
S-80856CLY-n2-U
5.6 V2.0 %
0.285 V
S-80857CLPF-B7ITFU
S-80857CLY-n2-U
5.7 V2.0 %
0.290 V
S-80858CLPF-B7JTFU
S-80858CLY-n2-U
5.8 V2.0 %
0.295 V
S-80859CLPF-B7KTFU
S-80859CLY-n2-U
5.9 V2.0 %
0.300 V
S-80860CLPF-B7LTFU
S-80860CLY-n2-U
6.0 V2.0 %
*1. n changes according to the packing form in TO-92. B: Bulk, Z: Tape and ammo
*2. Describes the release voltage.
*3. Refer to the Table 19 in “ Electricala Characteristics for Customized Products” for electrical characteristics.
11
SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR
S-808xxC Series
Rev.6.2_02
Output Forms
1. Output Forms in S-808xxC Series
Table 5
Nch open-drain output products
(Active Low)
“N” is the last letter of the product name.
e.g. S-80815CN
S-808xxC Series
CMOS output products
(Active Low)
“L” is the last letter of the product name.
e.g. S-80815CL
2. Output Forms and Their Usage
Table 6
Usage
Nch open-drain output products CMOS output products
(Active Low)
(Active Low)
Different power supplies
Yes
No
Active Low reset for CPUs
Yes
Yes
Active High reset for CPUs
No
No
Detection voltage change by resistor divider
Yes
No
Example for two power supplies
VDD1
VDD2
V/D
Nch
VSS
OUT
CPU
Example for one power supply
VDD
VDD
V/D
CMOS OUT
CPU
VSS
VSS
Figure 3
12
V/D
Nch
OUT
CPU
SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR
S-808xxC Series
Rev.6.2_02
Pin Configurations
Table 7
SC-82AB
Top view
4
3
1
Pin No.
Symbol
Description
1
OUT
Voltage detection output pin
2
VDD
Voltage input pin
3
NC*1
No connection
4
VSS
GND pin
*1. The NC pin is electrically open.
The NC pin can be connected to VDD or VSS.
2
Figure 4
Table 8
SOT-23-5
Top view
5
1
Pin No.
Symbol
Description
1
OUT
Voltage detection output pin
2
VDD
Voltage input pin
3
VSS
GND pin
4
NC*1
No connection
5
NC*1
No connection
*1. The NC pin is electrically open.
The NC pin can be connected to VDD or VSS.
4
2
3
Figure 5
Table 9
SOT-89-3
Top view
1
2
Pin No.
1
2
3
Symbol
OUT
VDD
VSS
Description
Voltage detection output pin
Voltage input pin
GND pin
3
Figure 6
Table10
SNT-4A
Top view
1
4
2
3
Pin No.
Symbol
Description
1
OUT
Voltage detection output pin
2
VSS
GND pin
3
NC*1
No connection
4
VDD
Voltage input pin
*1. The NC pin is electrically open.
The NC pin can be connected to VDD or VSS.
Figure 7
13
SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR
S-808xxC Series
TO-92
Bottom view
1 2 3
Figure 8
14
Rev.6.2_02
Table 11
Pin No.
1
2
3
Symbol
OUT
VDD
VSS
Description
Voltage detection output pin
Voltage input pin
GND pin
Rev.6.2_02
SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR
S-808xxC Series
Absolute Maximum Ratings
1. Detection Voltage Typ. 1.4 V or Less Products
Table 12
Item
Power supply voltage
Output voltage Nch open-drain output products
CMOS output products
Output current
Power
SC-82AB
dissipation
SNT-4A
Symbol
VDDVSS
VOUT
IOUT
PD
Operating ambient temperature
Topr
Storage temperature
Tstg
*1. When mounted on board
[Mounted board]
(1) Board size: 114.3 mm 76.2 mm t1.6 mm
(2) Board name: JEDEC STANDARD51-7
(Ta 25 C unless otherwise specified)
Absolute maximum ratings
Unit
7
V
V
VSS0.3 to VSS7
V
VSS0.3 to VDD0.3
50
mA
150 (When not mounted on board) mW
350*1
mW
140 (When not mounted on board) mW
300*1
mW
40 to 85
C
40 to 125
C
Power Dissipation PD (mW)
Caution The absolute maximum ratings are rated values exceeding which the product could suffer
physical damage. These values must therefore not be exceeded under any conditions.
500
400
SC-82AB
300
200
SNT-4A
100
0
0
50
100
150
Ambient Temperature Ta (C)
Figure 9 Power Dissipation of Package (When Mounted on Board)
15
SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR
S-808xxC Series
Rev.6.2_02
2. Detection Voltage Typ. 1.5 V or More Products
Table 13
Item
Power supply voltage
Output voltage Nch open-drain output products
CMOS output products
Output current
Power
SC-82AB
dissipation
SOT-23-5
Symbol
VDDVSS
VOUT
IOUT
PD
SOT-89-3
SNT-4A
TO-92
Operating ambient temperature
Topr
Storage temperature
Tstg
*1. When mounted on board
[Mounted board]
(1) Board size: 114.3 mm 76.2 mm t1.6 mm
(2) Board name: JEDEC STANDARD51-7
(Ta 25 C unless otherwise specified)
Absolute maximum ratings
Unit
12
V
V
VSS0.3 to VSS12
V
VSS0.3 to VDD0.3
50
mA
150 (When not mounted on board) mW
350*1
mW
250 (When not mounted on board) mW
600*1
mW
500 (When not mounted on board) mW
1000*1
mW
140 (When not mounted on board) mW
300*1
mW
400 (When not mounted on board) mW
800*1
mW
40 to 85
C
40 to 125
C
Caution The absolute maximum ratings are rated values exceeding which the product could suffer
physical damage. These values must therefore not be exceeded under any conditions.
Power Dissipation PD (mW)
1200
SOT-89-3
1000
TO-92
800
SOT-23-5
600
SC-82AB
400
200
0
SNT-4A
0
50
100
150
Ambient Temperature Ta (C)
Figure 10 Power Dissipation of Package (When Mounted on Board)
16
Rev.6.2_02
SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR
S-808xxC Series
Electrical Characteristics
1. Nch Open-drain Output Products
1-1. Detection Voltage Typ.1.4 V or Less Products
Table 14
Item
Symbol
Condition
Detection voltage*1
VDET
Release voltage
VDET
Hysteresis width
VHYS
Current consumption
ISS
Operating voltage
VDD
Output current
IOUT
Leakage current
ILEAK
Response time
tPLH
S-80808
S-80809
S-80810
S-80811
S-80812
S-80813
S-80814
S-80808
S-80809
S-80810
S-80811
S-80812
S-80813
S-80814
VDD 1.5 V
VDD 2.0 V
S-80808 to 09
S-80810 to 14
Output transistor,
Nch, VDS 0.5 V, VDD 0.7 V
Output transistor,
Nch, VDS 5.0 V, VDD 5.0 V
(Ta 25 C unless otherwise specified)
Test
Min.
Typ.
Max.
Unit
circuit
VDET(S) VDET(S) VDET(S)
V
1
0.98
1.02
V
1
0.802
0.834
0.867
V
1
0.910
0.944
0.979
V
1
1.017
1.054
1.091
V
1
1.125
1.164
1.203
V
1
1.232
1.273
1.315
V
1
1.340
1.383
1.427
V
1
1.448
1.493
1.538
V
1
0.018
0.034
0.051
V
1
0.028
0.044
0.061
V
1
0.037
0.054
0.071
V
1
0.047
0.064
0.081
V
1
0.056
0.073
0.091
V
1
0.066
0.083
0.101
V
1
0.076
0.093
0.110
1.3
3.5
2
A
1.3
3.5
2
A
0.65
5.0
V
1
0.04
0.2
mA
3
60
nA
3
60
s
1
Detection voltage
VDET
ppm/
temperature
1
Ta 40 to 85 C
100
350
C
*2
Ta
V
DET
coefficient
*1. VDET: Actual detection voltage value, VDET(S): Specified detection voltage value (The center value of the
detection voltage range in Table 1 to 2.)
*2. The temperature change of the detection voltage [mV/°C] is calculated by using the following equation.
VDET
mV/ C*1 VDET(S) Typ. V *2 VDET ppm/ C*3 1000
Ta VDET
Ta
*1. Temperature change of the detection voltage
*2. Specified detection voltage
*3. Detection voltage temperature coefficient
17
SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR
S-808xxC Series
Rev.6.2_02
1-2. Detection Voltage Typ.1.5 V or More Products
Table 15
Item
Symbol
Condition
Detection voltage*1
VDET
Hysteresis width
VHYS
Current consumption
ISS
Operating voltage
Output current
VDD
IOUT
Leakage current
ILEAK
VDD 3.5 V
VDD 4.5 V
VDD 6.0 V
VDD 7.5 V
S-80815 to 26
S-80827 to 39
S-80840 to 56
S-80857 to 60
Output transistor, VDD 1.2 V
Nch, VDS 0.5 V S-80815 to 60
VDD 2.4 V
S-80827 to 60
Output transistor,
Nch, VDS 10.0 V, VDD 10.0 V
(Ta 25 C unless otherwise specified)
Test
Min.
Typ.
Max. Unit
circuit
VDET(S) VDET(S) VDET(S)
V
1
0.98
1.02
VDET
VDET
VDET
V
1
0.03
0.05
0.08
0.8
2.4
2
A
2
0.8
2.4
A
2
0.9
2.7
A
2
0.9
2.7
A
0.95
10.0
V
1
0.59
1.36
mA
3
2.88
4.98
mA
3
100
nA
3
Response time
tPLH
60
1
s
Detection voltage
VDET
ppm/
1
temperature
Ta 40 to 85 C
100
350
C
Ta VDET
coefficient*2
*1. VDET: Actual detection voltage value, VDET(S): Specified detection voltage value (The center value of the
detection voltage range in Table 1 to 2.)
*2. The temperature change of the detection voltage [mV/°C] is calculated by using the following equation.
VDET
mV/ C*1 VDET(S) Typ. V *2 VDET ppm/ C*3 1000
Ta
Ta VDET
*1. Temperature change of the detection voltage
*2. Specified detection voltage
*3. Detection voltage temperature coefficient
18
Rev.6.2_02
SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR
S-808xxC Series
2. CMOS Output Products
2-1. Detection Voltage Typ.1.4 V or Less Products
Table 16
Item
Symbol
Detection voltage*1
VDET
Release voltage
VDET
Hysteresis width
VHYS
Current consumption
ISS
Operating voltage
Output current
VDD
IOUT
(Ta 25 C unless otherwise specified)
Test
Condition
Min.
Typ.
Max.
Unit
circuit
VDET(S) VDET(S) VDET(S)
V
1
0.98
1.02
S-80808
0.802
0.834
0.867
V
1
S-80809
0.910
0.944
0.979
V
1
S-80810
1.017
1.054
1.091
V
1
S-80811
1.125
1.164
1.203
V
1
S-80812
1.232
1.273
1.315
V
1
S-80813
1.340
1.383
1.427
V
1
S-80814
1.448
1.493
1.538
V
1
S-80808
0.018
0.034
0.051
V
1
S-80809
0.028
0.044
0.061
V
1
S-80810
0.037
0.054
0.071
V
1
S-80811
0.047
0.064
0.081
V
1
S-80812
0.056
0.073
0.091
V
1
S-80813
0.066
0.083
0.101
V
1
S-80814
0.076
0.093
0.110
V
1
S-80808 to 09
1.3
3.5
2
A
VDD 1.5 V
S-80810 to 14
1.3
3.5
2
A
VDD 2.0 V
0.65
5.0
V
1
Output transistor,
0.04
0.2
mA
3
Nch, VDS 0.5 V, VDD 0.7 V
Output transistor,
2.9
5.8
mA
4
Pch, VDS 2.1 V, VDD 4.5 V
60
1
s
Response time
tPLH
Detection voltage
VDET
ppm/
1
temperature
Ta 40 to 85 C
100
350
C
*2
Ta
V
DET
coefficient
*1. VDET: Actual detection voltage value, VDET(S): Specified detection voltage value (The center value of the
detection voltage range in Table 3 to 4.)
*2. The temperature change of the detection voltage [mV/°C] is calculated by using the following equation.
VDET
mV/ C*1 VDET(S) Typ. V *2 VDET ppm/ C*3 1000
Ta VDET
Ta
*1. Temperature change of the detection voltage
*2. Specified detection voltage
*3. Detection voltage temperature coefficient
19
SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR
S-808xxC Series
Rev.6.2_02
2-2. Detection Voltage Typ.1.5 V or More Products
Table 17
Item
Symbol
Condition
Detection voltage*1
VDET
Hysteresis width
VHYS
Current consumption
ISS
Operating voltage
Output current
VDD
IOUT
VDD 3.5 V
VDD 4.5 V
VDD 6.0 V
VDD 7.5 V
S-80815 to 26
S-80827 to 39
S-80840 to 56
S-80857 to 60
Output transistor, VDD 1.2 V
Nch, VDS 0.5 V S-80815 to 60
VDD 2.4 V
S-80827 to 60
Output transistor, VDD 4.8 V
Pch, VDS 0.5 V S-80815 to 39
VDD 6.0 V
S-80840 to 56
VDD 8.4 V
S-80857 to 60
(Ta 25 C unless otherwise specified)
Test
Min.
Typ.
Max. Unit
circuit
VDET(S) VDET(S) VDET(S)
V
1
0.98
1.02
VDET
VDET
VDET
V
1
0.03
0.05
0.08
0.8
2.4
2
A
0.8
2.4
2
A
0.9
2.7
2
A
0.9
2.7
2
A
0.95
10.0
V
1
0.59
1.36
mA
3
2.88
4.98
mA
3
1.43
2.39
mA
4
1.68
2.78
mA
4
2.08
3.42
mA
4
Response time
tPLH
60
1
s
Detection voltage
VDET
ppm/
1
temperature
Ta 40 to 85 C
100
350
°C
*2
Ta
V
DET
coefficient
*1. VDET: Actual detection voltage value, VDET(S): Specified detection voltage value (The center value of the
detection voltage range in Table 3 to 4.)
*2. The temperature change of the detection voltage [mV/°C] is calculated by using the following equation.
VDET
mV/ C*1 VDET(S) Typ. V *2 VDET ppm/ C*3 1000
Ta
Ta VDET
*1. Temperature change of the detection voltage
*2. Specified detection voltage
*3. Detection voltage temperature coefficient
20
SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR
S-808xxC Series
Rev.6.2_02
Test Circuits
1.
VDD
VDD
S-808xxC
V
*1
R
100 k
OUT
Series
V
VSS
*1. R is unnecessary for CMOS output products.
Figure 11
2.
A
VDD
VDD
S-808xxC
OUT
Series
VSS
Figure 12
3.
VDD
VDD
S-808xxC
V
OUT
A
Series
VSS
VDS
V
Figure 13
4.
VDS
VDD
VDD
S-808xxC
V
V
OUT
A
Series
VSS
Figure 14
21
SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR
S-808xxC Series
Rev.6.2_02
Timing Chart
1. Nch Open-drain Output Products
VDD
Release voltage (VDET)
Detection voltage (VDET)
Hysteresis width (VHYS)
Minimum operating voltage
VSS
OUT
VSS
VDD
R
100 k
VDD
V
Output from the OUT pin
VSS
Figure 15
2. CMOS Output Products
VDD
Release voltage (VDET)
Detection voltage (VDET)
Hysteresis width (VHYS)
Minimum operating voltage
VSS
VDD
OUT
VSS
VDD
V
Output from the OUT pin
VSS
Remark For values of VDD less than minimum operating voltage, values of OUT terminal output is free in the
shaded region.
Figure 16
22
Rev.6.2_02
SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR
S-808xxC Series
Operation
1. Basic Operation: CMOS Output (Active Low)
1-1. When the power supply voltage (VDD) is higher than the release voltage (VDET), the Nch transistor is
OFF and the Pch transistor is ON to provide VDD (high) at the output. Since the Nch transistor N1 in
(RB RC) VDD
.
Figure 17 is OFF, the comparator input voltage is
RA RB RC
1-2. When the VDD goes below VDET, the output provides the VDD level, as long as the VDD remains above
the detection voltage VDET. When the VDD falls below VDET (point A in Figure 18), the Nch transistor
becomes ON, the Pch transistor becomes OFF, and the VSS level appears at the output. At this time
the Nch transistor N1 in Figure 17 becomes ON, the comparator input voltage is changed to
RB VDD
.
RA RB
1-3. When the VDD falls below the minimum operating voltage, the output becomes undefined, or goes to the
VDD when the output is pulled up to the VDD.
1-4. The VSS level appears when the VDD rises above the minimum operating voltage. The VSS level still
appears even when the VDD surpasses VDET, as long as it does not exceed the release voltage VDET.
1-5. When the VDD rises above VDET (point B in Figure 18), the Nch transistor becomes OFF and the Pch
transistor becomes ON to provide VDD level at the output.
VDD
*1
RA
*1
Pch
OUT
*1
RB
Nch
VREF
VSS
RC
N1
*1. Parasiteic diode
Figure 17 Operation 1
23
SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR
S-808xxC Series
(1)
(2) (3)
(4)
B
A
Hysteresis width (VHYS)
Rev.6.2_02
(5)
VDD
Release voltage (VDET)
Detection voltage (VDET)
Minimum operating voltage
VSS
VDD
Output from the OUT pin
VSS
Figure 18 Operation 2
2. Other Characteristics
2-1. Temperature Characteristics of Detection Voltage
The shaded area in Figure 19 shows the temperature characteristics of the detection voltage.
VDET [V]
0.945 mV/C
VDET25
*1
0.945 mV/C
40
*1.
25
85
Ta [C]
VDET25 is an actual detection voltage value at 25°C.
Figure 19 Temperature Characteristics of Detection Voltage (Example for S-80827C)
2-2. Temperature Characteristics of Release Voltage
The temperature change
VDET
of the release voltage is calculated by using the temperature
Ta
VDET
of the detection voltage as follows:
Ta
VDET VDET VDET
Ta
VDET
Ta
The temperature change of the release voltage and the detection voltage have the same sign
consequently.
chnange
24
Rev.6.2_02
SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR
S-808xxC Series
2-3. Temperature Characteristics of Hysteresis Voltage
The temperature change of the hysteresis voltage is expressed as
VDET VDET
and is calculated
Ta
Ta
as follows:
VDET VDET
VHYS VDET
Ta
Ta
VDET
Ta
Standard Circuit
R*1
100 k
VDD
OUT
VSS
*1. R is unnecessary for CMOS output products.
Figure 20
Caution The above connection diagram and constants do not guarantee correct operation. Perform
sufficient evaluation using the actual application to set the constants.
Technical Terms
1. Detection Voltage (VDET), Release Voltage (VDET)
The detection voltage (VDET) is a voltage at which the output turns to low. The detection voltage varies slightly
among products of the same specification. The variation of detection voltage between the specified minimum
(VDET) Min. and the maximum (VDET) Max. is called the detection voltage range (Refer to Figure 21).
Example: For the S-80815CN, the detection voltage lies in the range of 1.470(VDET)1.530.
This means that some S-80815CNs have 1.470 V for VDET and some have 1.530 V.
The release voltage (VDET) is a voltage at which the output turns to high. The release voltage varies slightly
among products of the same specification. The variation of release voltages between the specified
minimum (VDET) Min. and the maximum (VDET) Max. is called the release voltage range (Refer to Figure
22). The range is calculed from the actual detection voltage (VDET) of a product and is expressed by
VDET1.03VDETVDET 1.08.
Example: For the S-80815CN, the release voltage lies in the range of 1.514(VDET)1.652.
This means that some S-80815CNs have 1.514 V for VDET and some have 1.652 V.
25
SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR
S-808xxC Series
VDD
Detection voltage
(VDET) Max.
Detection voltage range
(VDET) Min.
Rev.6.2_02
VDD
Release voltage
(VDET) Max.
Release voltage range
(VDET) Min.
OUT
OUT
Figure 21 Detection Voltage (CMOS Output Products)
Figure 22 Release Voltage (CMOS Output Products)
Remark Although the detection voltage and release voltage overlap in the range of 1.514 V to 1.530 V,
VDET is always larger than VDET.
2. Hysteresis Width (VHYS)
The hysteresis width is the voltage difference between the detection voltage and the release voltage (The
voltage at point B The voltage at point A VHYS in Figure 18). The existence of the hysteresis width
prevents malfunction caused by noise on input signal.
3. Through-type Current
The through-type current refers to the current that flows instantaneously at the time of detection and release
of a voltage detector. The through-type current is large in CMOS output products, small in Nch open-drain
output products.
4. Oscillation
In applications where a resistor is connected to the voltage detector input (Figure 23), taking a CMOS active
low product for example, the through-type current which is generated when the output goes from low to high
(release) causes a voltage drop equal to [through-type current][input resistance] across the resistor. When
the input voltage drops below the detection voltage (VDET) as a result, the output voltage goes to low level.
In this state, the through-type current stops and its resultant voltage drop disappears, and the output goes
from low to high. A through-type current is again generated, a voltage drop appears, and repeating the
process finally induces oscillation.
VDD
RA
VIN
S-808xxCL
OUT
RB
VSS
Figure 23 An Example for Bad Implementation of Input Voltage Divider
26
SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR
S-808xxC Series
Rev.6.2_02
Electrical Characteristics for Customized Products
1. S-80824KNUA-D2BT2x, S-80824KNY-n2-U
Table 18
Item
Symbol
*1
Detection voltage
Release voltage
Current consumption
Operating voltage
Output current
VDET
VDET
ISS
VDD
IOUT
Leakage current
ILEAK
(Ta 25 C unless otherwise specified)
Test
Condition
Min.
Typ.
Max.
Unit
circuit
2.295 2.400*2 2.505
V
1
4.300
4.400 4.500
V
1
0.8
2.4
2
A
VDD6.0 V
0.95
10.0
V
1
0.24
mA
3
Output transistor, VDD 0.95 V 0.03
Nch, VDS 0.5 V VDD 1.2 V
0.23
0.50
mA
3
Output transistor,
0.1
3
A
Nch, VDD 10.0 V, VDS 10.0 V
60
1
s
Response time
tPLH
Detection voltage
VDET
1
temperature
Ta 40 to 85 °C
100
350 ppm/°C
Ta VDET
coefficient*3
*1. VDET: Actual detection voltage value
*2. Specified detection voltage value (VDET(S))
*3. The temperature change of the detection voltage [mV/°C] is calculated by using the following equation.
VDET
mV/ C*1 VDET(S) Typ. V *2 VDET ppm/ C*3 1000
Ta
Ta VDET
*1. Temperature change of the detection voltage
*2. Specified detection voltage
*3. Detection voltage temperature coefficient
27
SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR
S-808xxC Series
Rev.6.2_02
2. S-80844KLUA-D2AT2x, S-80844KLY-n2-U
Table 19
Item
Symbol
*1
Detection voltage
Release voltage
Current consumption
Operating voltage
Output current
VDET
VDET
ISS
VDD
IOUT
(Ta 25 C unless otherwise specified)
Test
Condition
Min.
Typ.
Max.
Unit
circuit
4.295 4.450*2 4.605
V
1
4.700
V
1
1.0
3.0
2
A
VDD 6.0 V
0.95
10.0
V
1
0.50
mA
3
Output transistor, VDD 1.2 V 0.23
Nch, VDS 0.5 V VDD 2.4 V 1.60
3.70
mA
3
Output transistor,
0.62
mA
4
VDD 4.8 V 0.36
Pch, VDS 0.5 V
60
1
s
Response time
tPLH
Detection voltage
VDET
1
temperature
Ta 40 to 85 °C
100
350 ppm/°C
Ta VDET
coefficient*3
*1. VDET: Actual detection voltage value
*2. Specified detection voltage value (VDET(S))
*3. The temperature change of the detection voltage [mV/°C] is calculated by using the following equation.
VDET
mV/ C*1 VDET(S) Typ. V *2 VDET ppm/ C*3 1000
Ta
Ta VDET
*1. Temperature change of the detection voltage
*2. Specified detection voltage
*3. Detection voltage temperature coefficient
28
SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR
S-808xxC Series
Rev.6.2_02
3. S-80846KNUA-D2CT2x, S-80846KNY-n2-U
Table 20
Item
Symbol
Condition
Detection voltage
Hysteresis width
Current consumption
Operating voltage
Output current
VDET
VHYS
ISS
VDD
IOUT
Leakage current
ILEAK
Response time
Detection voltage
temperature
coefficient*3
tPLH
VDET
Ta VDET
VDD 6.0 V
Output transistor, VDD 1.2 V
Nch, VDS 0.5 V VDD 2.4 V
Output transistor,
Nch, VDD 10.0 V, VDS 10.0 V
*1
Ta 40 to 85 °C
(Ta 25 C unless otherwise specified)
Test
Min.
Typ.
Max.
Unit
circuit
*2
4.500 4.600
4.700
V
1
0.05
0.10
V
1
0.9
2.7
2
A
0.95
10.0
V
1
0.59
1.36
mA
3
2.88
4.98
mA
3
0.1
A
3
60
s
1
100
350
ppm/°C
1
*1. VDET: Actual detection voltage value
*2. Specified detection voltage value (VDET(S))
*3. The temperature change of the detection voltage [mV/°C] is calculated by using the following equation.
VDET
mV/ C*1 VDET(S) Typ. V *2 VDET ppm/ C*3 1000
Ta VDET
Ta
*1. Temperature change of the detection voltage
*2. Specified detection voltage
*3. Detection voltage temperature coefficient
Precautions
Do not apply an electrostatic discharge to this IC that exceeds the performance ratings of the built-in
electrostatic protection circuit.
In CMOS output products of the S-808xxC series, the through-type current flows at the detection and the
release. If the input impedance is high, oscillation may occur due to the voltage drop by the through-type
current during releasing.
In CMOS output products oscillation may occur when a pull-down resistor is used, and falling speed of the
power supply voltage (VDD) is slow near the detection voltage.
When designing for mass production using an application circuit described herein, the product deviation and
temperature characteristics should be taken into consideration. ABLIC Inc. shall not bear any responsibility
for the products on the circuits described herein.
ABLIC Inc. claims no responsibility for any and all disputes arising out of or in connection with any
infringement of the products including this IC upon patents owned by a third party.
29
SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR
S-808xxC Series
Rev.6.2_02
Typical Characteristics (Typical Data)
1. Detection Voltage (VDET) - Temperature (Ta)
S-80808CL
S-80814CL
0.90
1.55
+VDET
1.50
+VDET
1.45
VDET (V)
VDET (V)
0.85
1.40
-VDET
1.35
0.80
-VDET
1.30
1.25
0.75
-40
-20
0
20
Ta (°C)
40
60
-40
80
S-80815CL
-20
0
20
40
60
80
20
40
60
80
20
40
60
80
40
60
80
Ta (°C)
S-80860CL
1.60
6.40
6.30
+VDET
VDET (V)
VDET (V)
1.55
1.50
-VDET
+VDET
6.20
6.10
6.00
-VDET
5.90
5.80
1.45
-40
-20
0
20
Ta (°C)
40
60
-40
80
-20
0
-20
0
Ta (°C)
2. Hysteresis Voltage Width (VHYS) - Temperature (Ta)
S-80814CL
8.0
7.0
7.0
6.0
6.0
VHYS (%)
V HYS (%)
S-80808CL
8.0
5.0
4.0
3.0
-40
5.0
4.0
3.0
-20
0
20
40
Ta (°C)
60
80
-40
Ta (°C)
S-80815CL
8.0
S-80860CL
8.0
7.0
6.0
VHYS (%)
V HYS (%)
7.0
5.0
4.0
3.0
-40
30
6.0
5.0
4.0
3.0
-20
0
20
40
Ta (°C)
60
80
-40
-20
0
20
Ta (°C)
SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR
S-808xxC Series
Rev.6.2_02
3. Current Consumption (ISS) - Input Voltage (VDD)
4.5
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0.0
Ta=25°C
S-80814CL
9.3 A
ISS (A)
ISS (A)
S-80808CL
0
1.0
2.0
3.0
4.0
5.0
Ta=25°C
4.5
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0.0
21.5 A
6.0
0
1.0
2.0
VDD (V)
Ta=25°C
4.7 A
0
2.0
4.0
6.0
8.0
10.0
6.0
12.8 A
0
12.0
4. Current Consumption (ISS) - Temperature (Ta)
S-80808CL
VDD1.5 V
2.0
2.0
4.0
6.0
VDD (V)
8.0
S-80814CL
10.0
12.0
VDD2.0 V
2.0
1.5
ISS (A)
1.5
ISS (A)
5.0
Ta=25°C
1.8
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0.0
VDD (V)
1.0
0.5
0.0
1.0
0.5
0.0
-40
-20
0
20
40
60
80
-40
Ta (°C)
VDD3.5 V
S-80815CL
2.0
-20
0
20
Ta (°C)
40
S-80860CL
60
80
VDD7.5 V
2.0
1.5
1.5
ISS (A)
ISS (A)
4.0
S-80860CL
ISS (A)
ISS (A)
S-80815CL
1.8
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0.0
3.0
VDD (V)
1.0
0.5
0.0
-40
-20
0
20
Ta (°C)
40
60
80
1.0
0.5
0.0
-40
-20
0
20
Ta (°C)
40
60
80
31
SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR
S-808xxC Series
Rev.6.2_02
5. Nch Transistor Output Current (IOUT) – VDS
S-80814CL/CN
5.0
Ta=25°C
VDD1.3 V
4.0
3.0
VDD1.0
2.0
1.0
Ta=25°C
6.0 V
40
IOUT (mA)
IOUT (mA)
S-80860CL/CN
50
VDD0.7 V
0
4.8 V
30
3.6 V
20
2.4 V
10
VDD1.2 V
0
0
0.5
1.0
1.5
VDS (V)
2.0
2.5
0
1.0
2.0
3.0
VDS (V)
4.0
5.0
6. Pch Transistor Output Current (IOUT) -VDS
Ta=25ºC
4.0
VDD2.9V
3.0
VDD2.4V
2.0
VDD1.9 V
1.0
0
0.5
Ta=25ºC
8.4 V
25
VDD1.4 V
VDD0.9 V
0
S-80815CL
30
IOUT (mA)
IOUT (mA)
S-80808CL
5.0
20
7.2 V
6.0 V
15
4.8 V
3.6 V
10
5
VDD2.4 V
0
1.0
1.5
VDS (V)
2.0
0
2.5
2.0
4.0
6.0
VDS (V)
8.0
10.0
7. Nch Transistor Output Current (IOUT) - Input Voltage (VDD)
S-80814CL/CN
VDS0.5 V
6.0
S-80860CL/CN
20
VDS0.5 V
Ta=-40°C
Ta=-40°C
15
Ta=25°C
IOUT (mA)
IOUT (mA)
4.5
3.0
1.5
Ta=85°
0
0
0.5
1.0
VDD (V)
1.5
Ta=25°C
10
5
Ta=85°C
0
2.0
0
2.0
4.0
VDD (V)
6.0
8.0
8. Pch Transistor Output Current (IOUT) - Input Voltage (VDD)
S-80808CL
VDS0.5 V
3.0
IOUT (mA)
IOUT (mA)
Ta=25°C
1.0
Ta=85°C
1.0
2.0
3.0
VDD (V)
32
4.0
5.0
4
Ta=25°C
3
2
Ta=85°C
1
0
0
Ta=-40°C
5
1.5
0.5
VDS0.5 V
6
Ta=-40°C
2.5
2.0
S-80815CL
6.0
0
0
2.0
4.0
6.0
VDD (V)
8.0
10.0
12.0
SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR
S-808xxC Series
Rev.6.2_02
9. Minimum Operating Voltage - Input Voltage (VDD)
S-80808CN
Pull-up to VDD 100 k
4.0
0.9
3.0
VOUT (V)
Ta=-40°C
VOUT (V)
S-80808CN
1.2
0.6
Ta=25°C
0.3
Ta=85°C
0.0
0.0
0.2
0.4
0.6
Pull-up to VDD 100 k
Ta=85°C
1.0
0.2
4.0
1.5
3.0
VOUT (V)
VOUT (V)
Ta=-40°C
Ta=25°C
0.5
Ta=85°C
0.0
0
0.5
1.0
VDD (V)
S-80808CN
2.0
Pull-up to VDD :100 k
0.65
0.60
1.5
Ta=-40°C
0.4
0.6
0.8
VDD (V)
S-80815CN
2.0
1.0
Ta=25°C
2.0
VDD (V)
S-80815CN
Ta=-40°C
0.0
1.0
0.8
Pull-up to 3 V
1.0
Pull-up to 3 V
Ta=-40°C
Ta=25°C
2.0
Ta=85°C
1.0
0.0
0
0.5
1.0
VDD (V)
1.5
2.0
VOUT(V)
PULL-UP
VDDmin (V)
0.55
0.50
PULL-UP0.1
0.45
0.40
Ta=25°C
0.35
Ta=85°C
0.30
1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5
PULL-UP (V)
S-80815CN
0.75
0.70
Pull-up to VDD :100 k
0
VDDmin
VDD(V)
Remark VDDmin. is defined by the VDD voltage at
which VOUT goes below 10 of
PULL-UP voltage when the VDD
increase from 0 V.
Figure 24
Ta=-40°C
VDDmin (V)
0.65
0.60
0.55
0.50
0.45
Ta=85°C
Ta=25°C
0.40
3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0
PULL-UP (V)
33
SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR
S-808xxC Series
Rev.6.2_02
10. Dynamic Response - COUT
S-80808CL
Response time (ms)
tpHL
0.1
0.01
tpLH
0.001
0.00001
0.0001
0.001
0.01
S-80808CN
0.1
0.01
tpLH
0.0001
0.001
0.01
0.01
tpLH
0.001
0.01
Load Capacitance (F)
34
Respone time (ms)
Response time (ms)
tpLH
0.01
tpHL
0.01
0.0001
0.001
0.01
0.1
Ta=25°C
tpLH
10
1
0.1
tpHL
0.01
0.0001
0.001
0.01
0.1
Ta=25°C
100
0.01
0.001
0.1
S-80860CN
0.1
0.0001
tpLH
Load Capacitance (F)
tpHL
0.001
0.00001
Ta=25°C
1
0.001
0.00001
0.1
Ta=25°C
1
0.1
100
Load Capacitance (F)
S-80860CL
0.01
S-80815CN
Response time (ms)
Response time (ms)
0.1
0.0001
0.001
Load Capacitance (F)
tpHL
0.001
0.00001
0.0001
10
0.001
0.00001
0.1
Ta=25°C
1
tpHL
0.01
100
Load capacitanse (F)
S-80815CL
0.1
S-80814CN
Response time (ms)
Response time (ms)
tpHL
0.001
0.00001
1
Load capacitance (F)
Ta=25°C
1
tpLH
10
0.001
0.00001
0.1
Load capacitance (F)
S-80814CL
Ta=25°C
100
Resopnse time (ms)
Ta=25°C
1
0.1
tpLH
10
1
0.1
tpHL
0.01
0.001
0.00001
0.0001
0.001
0.01
Load Capacitance (F)
0.1
SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR
S-808xxC Series
Rev.6.2_02
1 s
1 s
VIH
VDD
Input voltagae
V
VIL
tpHL
VDD
S-808xxC OUT
Series
COUT
VSS
tpLH
VDD
VDD90 %
Output voltage
*1
R
100 k
V
*1. R is unnecessary for CMOS output products.
VDD10 %
VIH10 V, VIL0.95 V
Figure 25 Measurement Condition for Response Time
Figure 26 Measurement Circuit for Response Time
Caution The above connection diagram and constants do not guarantee correct operation. Perform
sufficient evaluation using the actual application to set the constants.
Application Circuit Examples
1. Microcomputer Reset Circuits
If the power supply voltage to a microcomputer falls below the specified level, an unspecified operation may
be performed or the contents of the memory register may be lost. When power supply voltage returns to
normal, the microcomputer needs to be initialized before normal operations can be done.
Reset circuits protect microcomputers in the event of current being momentarily switched off or lowered.
Reset circuits shown in Figures 27 to 28 can be easily constructed with the help of the S-808xxC series,
that has low operating voltage, a high-precision detection voltage and hysteresis.
VDD1
VDD2
VDD
S808xxCL
S808xxCN
Microcomputer
Microcomputer
VSS
VSS
(Only for Nch open-drain products)
Figure 27 Reset Circuit Example(S-808xxCL)
Figure 28 Reset Circuit Example (S-808xxCN)
Caution The above connection diagram and constants do not guarantee correct operation. Perform
sufficient evaluation using the actual application to set the constants.
35
SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR
S-808xxC Series
Rev.6.2_02
2. Power-on Reset Circuit
A power-on reset circuit can be constructed using Nch open-drain output product of S-808C Series.
VDD
Di
*1
R
VIN
(R75 k)
*2
S808xxCN
OUT
(Nch open-drain products)
C
VSS
*1. Resistor R should be 75 k or less to prevent oscillation.
*2. Diode Di instantaneously discharges the charge stored in the capacitor (C) at the
power falling,Di can be removed when the delay of the falling time is not important.
Figure 29
VDD
(V)
OUT
(V)
t (s)
t (s)
Figure 30
Remark When the power rises sharply as shown in the Figure 31 left, the output may goes to the high level
for an instant in the undefined region where the output voltage is undefined since the power
voltage is less than the minimum operation voltage.
VDD
(V)
OUT
(V)
t (s)
t (s)
Figure 31
36
SUPER-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR
S-808xxC Series
Rev.6.2_02
3. Change of Detection Voltage
In Nch open-drain output products of the S-808xxC series, detection voltage can be changed using
resistance dividers or diodes as shown in Figures 32 to 33. In Figure 32, hysteresis width also changes.
VDD
VDD
RA
Vf1
*1
(RA75 k)
RB
S808xxCN
VIN
Vf2
OUT
VIN
S808xxCN
OUT
(Nch open-drain
output product)
(Nch open-drain
output products)
VSS
VSS
RA RB
VDET
RB
RA RB
Hysterisis width
VHYS
RB
Detection voltagae
Detection voltage=Vf1+Vf2+(VDET)
*1. RA should be 75 k or less to prevent oscillation.
Caution If RA and RB are large, the hysteresis
width may aloso be larger than the
value given by the above equation due
to the through-type current (which
flows slightly in an Nch open-drain
product).
Figure 32
Figure 33
Caution The above connection diagram and constants do not guarantee correct operation. Perform
sufficient evaluation using the actual application to set the constants.
37
2.0±0.2
1.3±0.2
4
3
0.05
0.3
+0.1
-0.05
+0.1
0.16 -0.06
2
1
+0.1
0.4 -0.05
No. NP004-A-P-SD-2.0
TITLE
SC82AB-A-PKG Dimensions
NP004-A-P-SD-2.0
No.
ANGLE
UNIT
mm
ABLIC Inc.
+0.1
ø1.5 -0
4.0±0.1
2.0±0.05
1.1±0.1
4.0±0.1
0.2±0.05
ø1.05±0.1
(0.7)
2.2±0.2
2
1
3
4
Feed direction
No. NP004-A-C-SD-3.0
TITLE
SC82AB-A-Carrier Tape
No.
NP004-A-C-SD-3.0
ANGLE
UNIT
mm
ABLIC Inc.
4.0±0.1
2.0±0.1
ø1.5
1.1±0.1
+0.1
-0
4.0±0.1
0.2±0.05
ø1.05±0.1
2.3±0.15
2
1
3
4
Feed direction
No. NP004-A-C-S1-2.0
TITLE
SC82AB-A-Carrier Tape
No.
NP004-A-C-S1-2.0
ANGLE
UNIT
mm
ABLIC Inc.
12.5max.
9.0±0.3
Enlarged drawing in the central part
ø13±0.2
(60°)
(60°)
No. NP004-A-R-SD-1.1
TITLE
SC82AB-A-Reel
No.
NP004-A-R-SD-1.1
QTY.
ANGLE
UNIT
mm
ABLIC Inc.
3,000
2.9±0.2
1.9±0.2
4
5
1
2
+0.1
0.16 -0.06
3
0.95±0.1
0.4±0.1
No. MP005-A-P-SD-1.3
TITLE
SOT235-A-PKG Dimensions
No.
MP005-A-P-SD-1.3
ANGLE
UNIT
mm
ABLIC Inc.
4.0±0.1(10 pitches:40.0±0.2)
+0.1
ø1.5 -0
+0.2
ø1.0 -0
2.0±0.05
0.25±0.1
4.0±0.1
1.4±0.2
3.2±0.2
3 2 1
4
5
Feed direction
No. MP005-A-C-SD-2.1
TITLE
SOT235-A-Carrier Tape
No.
MP005-A-C-SD-2.1
ANGLE
UNIT
mm
ABLIC Inc.
12.5max.
9.0±0.3
Enlarged drawing in the central part
ø13±0.2
(60°)
(60°)
No. MP005-A-R-SD-1.1
SOT235-A-Reel
TITLE
No.
MP005-A-R-SD-1.1
ANGLE
QTY.
UNIT
mm
ABLIC Inc.
3,000
4.5±0.1
1.5±0.1
1.6±0.2
45°
1
2
3
1.5±0.1 1.5±0.1
0.4±0.05
0.4±0.1
0.4±0.1
0.45±0.1
No. UP003-A-P-SD-2.0
TITLE
SOT893-A-PKG Dimensions
No.
UP003-A-P-SD-2.0
ANGLE
UNIT
mm
ABLIC Inc.
4.0±0.1(10 pitches : 40.0±0.2)
+0.1
ø1.5 -0
2.0±0.05
ø1.5 +0.1
-0
0.3±0.05
8.0±0.1
2.0±0.1
4.75±0.1
Feed direction
No. UP003-A-C-SD-2.0
TITLE
SOT893-A-Carrier Tape
No.
UP003-A-C-SD-2.0
ANGLE
UNIT
mm
ABLIC Inc.
16.5max.
13.0±0.3
Enlarged drawing in the central part
(60°)
(60°)
No. UP003-A-R-SD-1.1
TITLE
SOT893-A-Reel
No.
UP003-A-R-SD-1.1
ANGLE
UNIT
QTY.
mm
ABLIC Inc.
1,000
1.2±0.04
3
4
+0.05
0.08 -0.02
2
1
0.65
0.48±0.02
0.2±0.05
No. PF004-A-P-SD-6.0
TITLE
SNT-4A-A-PKG Dimensions
No.
PF004-A-P-SD-6.0
ANGLE
UNIT
mm
ABLIC Inc.
+0.1
ø1.5 -0
4.0±0.1
2.0±0.05
0.25±0.05
+0.1
1.45±0.1
2
1
3
4
ø0.5 -0
4.0±0.1
0.65±0.05
Feed direction
No. PF004-A-C-SD-2.0
TITLE
SNT-4A-A-Carrier Tape
No.
PF004-A-C-SD-2.0
ANGLE
UNIT
mm
ABLIC Inc.
12.5max.
9.0±0.3
Enlarged drawing in the central part
ø13±0.2
(60°)
(60°)
No. PF004-A-R-SD-1.0
TITLE
SNT-4A-A-Reel
No.
PF004-A-R-SD-1.0
QTY.
ANGLE
UNIT
mm
ABLIC Inc.
5,000
0.52
1.16
2
0.52
0.35
1.
2.
0.3
1
(0.25 mm min. / 0.30 mm typ.)
(1.10 mm ~ 1.20 mm)
0.03 mm
1. Pay attention to the land pattern width (0.25 mm min. / 0.30 mm typ.).
2. Do not widen the land pattern to the center of the package (1.10 mm to 1.20 mm).
Caution 1. Do not do silkscreen printing and solder printing under the mold resin of the package.
2. The thickness of the solder resist on the wire pattern under the package should be 0.03 mm
or less from the land pattern surface.
3. Match the mask aperture size and aperture position with the land pattern.
4. Refer to "SNT Package User's Guide" for details.
1.
2.
(0.25 mm min. / 0.30 mm typ.)
(1.10 mm ~ 1.20 mm)
TITLE
SNT-4A-A
-Land Recommendation
PF004-A-L-SD-4.1
No.
No. PF004-A-L-SD-4.1
ANGLE
UNIT
mm
ABLIC Inc.
4.2max.
5.2max.
Marked side
0.6max.
0.45±0.1
0.45±0.1
1.27
No. YS003-D-P-SD-2.1
TITLE
TO92-D-PKG Dimensions
No.
YS003-D-P-SD-2.1
ANGLE
UNIT
mm
5.2max.
4.2max.
Marked side
0.6max.
0.45±0.1
0.45±0.1
+0.4
2.5 -0.1
1.27
No. YZ003-E-P-SD-2.1
TITLE
TO92-E-PKG Dimensions
No.
YZ003-E-P-SD-2.1
ANGLE
UNIT
mm
ABLIC Inc.
12.7±1.0
1.0max.
1.0max.
1.0max.
Marked side
1#pin
3#pin
1.45max.
0.7±0.2
ø4.0±0.2
6.35±0.4
12.7±0.3(20 pitches : 254.0±1.0)
Z type
Feed direction
No. YZ003-E-C-SD-1.1
TITLE
TO92-E-Radial Tape
No.
YZ003-E-C-SD-1.1
ANGLE
UNIT
mm
ABLIC Inc.
Spacer(Sponge)
312
18
35
Side spacer placed in front side
154
314
Space more than 4 strokes
162
333
43
No. YZ003-E-Z-SD-2.0
TITLE
TO92-E-Ammo Packing
No.
YZ003-E-Z-SD-2.0
ANGLE
UNIT
QTY.
mm
ABLIC Inc.
2,000
Disclaimers (Handling Precautions)
1.
All the information described herein (product data, specifications, figures, tables, programs, algorithms and
application circuit examples, etc.) is current as of publishing date of this document and is subject to change without
notice.
2.
The circuit examples and the usages described herein are for reference only, and do not guarantee the success of
any specific mass-production design.
ABLIC Inc. is not liable for any losses, damages, claims or demands caused by the reasons other than the products
described herein (hereinafter "the products") or infringement of third-party intellectual property right and any other
right due to the use of the information described herein.
3.
ABLIC Inc. is not liable for any losses, damages, claims or demands caused by the incorrect information described
herein.
4.
Be careful to use the products within their ranges described herein. Pay special attention for use to the absolute
maximum ratings, operation voltage range and electrical characteristics, etc.
ABLIC Inc. is not liable for any losses, damages, claims or demands caused by failures and / or accidents, etc. due to
the use of the products outside their specified ranges.
5.
Before using the products, confirm their applications, and the laws and regulations of the region or country where they
are used and verify suitability, safety and other factors for the intended use.
6.
When exporting the products, comply with the Foreign Exchange and Foreign Trade Act and all other export-related
laws, and follow the required procedures.
7.
The products are strictly prohibited from using, providing or exporting for the purposes of the development of
weapons of mass destruction or military use. ABLIC Inc. is not liable for any losses, damages, claims or demands
caused by any provision or export to the person or entity who intends to develop, manufacture, use or store nuclear,
biological or chemical weapons or missiles, or use any other military purposes.
8.
The products are not designed to be used as part of any device or equipment that may affect the human body, human
life, or assets (such as medical equipment, disaster prevention systems, security systems, combustion control
systems, infrastructure control systems, vehicle equipment, traffic systems, in-vehicle equipment, aviation equipment,
aerospace equipment, and nuclear-related equipment), excluding when specified for in-vehicle use or other uses by
ABLIC, Inc. Do not apply the products to the above listed devices and equipments.
ABLIC Inc. is not liable for any losses, damages, claims or demands caused by unauthorized or unspecified use of
the products.
9.
In general, semiconductor products may fail or malfunction with some probability. The user of the products should
therefore take responsibility to give thorough consideration to safety design including redundancy, fire spread
prevention measures, and malfunction prevention to prevent accidents causing injury or death, fires and social
damage, etc. that may ensue from the products' failure or malfunction.
The entire system in which the products are used must be sufficiently evaluated and judged whether the products are
allowed to apply for the system on customer's own responsibility.
10. The products are not designed to be radiation-proof. The necessary radiation measures should be taken in the
product design by the customer depending on the intended use.
11. The products do not affect human health under normal use. However, they contain chemical substances and heavy
metals and should therefore not be put in the mouth. The fracture surfaces of wafers and chips may be sharp. Be
careful when handling these with the bare hands to prevent injuries, etc.
12. When disposing of the products, comply with the laws and ordinances of the country or region where they are used.
13. The information described herein contains copyright information and know-how of ABLIC Inc. The information
described herein does not convey any license under any intellectual property rights or any other rights belonging to
ABLIC Inc. or a third party. Reproduction or copying of the information from this document or any part of this
document described herein for the purpose of disclosing it to a third-party is strictly prohibited without the express
permission of ABLIC Inc.
14. For more details on the information described herein or any other questions, please contact ABLIC Inc.'s sales
representative.
15. This Disclaimers have been delivered in a text using the Japanese language, which text, despite any translations into
the English language and the Chinese language, shall be controlling.
2.4-2019.07
www.ablic.com
工商网监
湘ICP备2023018690号
