4238

        Adafruit PyGamer Acrylic Enclosure Kit PRODUCT ID: 4238 You've got your PyGamer, and you're ready to start jammin' on your favorite arcade games. You gaze adoringly at the charming silkscreen designed by Adafriend PaintYourDragon. The nostalgia is palpable! Cradling the PCB in your hands, you realize there's something missing. You feel an overwhelming need to protect this incredible gaming console. Prevent monsters, gremlins, big level bosses, or accidentally-spilled coffee giving you a GAME OVER with the PyGamer Enclosure Kit! Expertly crafted and laser-cut, this enclosure will give your PyGamer a minimalist and elegant look. Enclosure kit includes:  1 x 3mm smoke acrylic top piece  1 x 3mm clear acrylic top piece  4 x 3mm clear acrylic side pieces  1 x 1.5mm clear acrylic back piece  4 x M3 x 18mm long black nylon screws  4 x M3 black nylon hex nuts These come with paper backings on both sides (it protects the acrylic while laser cutting and shipping). You'll need to peel those off before assembly. Note: this is only the enclosure kit. Don't forget the PyGamer too!     https://www.adafruit.com/product/4238/6‐10‐19