E125N50X4

RoHS Compliant Model E125N50X4 Flangeless Termination 125 Watts General Specifications Resistive Element Substrate Cover Terminal Finish Operating Temperature Thick film ALN Ceramic Alumina Ceramic Matte Tin over Sulfamate Nickel -55 to +150°C (see chart) Tolerance is ±0.010”, unless otherwise specified. Designed to meet of exceed applicable portions of MIL-E-5400. All dimensions in inches. Features: • 125 Watts Electrical Specifications 50 Ohms 125 Watts DC – 3.0 GHz 1.25 : 1 • Non-Nichrome Resistive Element Resistance: Power: Frequency Range: V.S.W.R.: • Low VSWR Specification based on unit properly installed using suggested mounting instructions and a 50 ohm nominal impedance. Specifications subject to change. • AlN Ceramic Substrate • High power • 100% Tested Outline Drawing Dimensions given in inches. E125N50X4 (097) Rev B Available on Tape and Reel For Pick and Place Manufacturing. USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 544-2414 +44 2392-232392 Model E125N50X4 Typical Performance: Power De-rating: Mounting Footprint and Procedure: E125N50X4 (097) Rev B USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 544-2414 +44 2392-232392 Available on Tape and Reel For Pick and Place Manufacturing.