APMG-Q551

AirborneTM Wireless Access Point Module 802.11b/g Wireless AP APMG-Q551 Flexible & Easy to Integrate Airborne incorporates support for both serial to Wi-Fi and Ethernet to Wi-Fi communications. Utilizing Airborne's PortFlex capability, OEMs may configure via software any combination of UART, SPI, Ethernet, GPIO and 802.11 interfaces. Each individual port can be independently configured. The Airborne line of highly-integrated 802.11 wireless modules allow OEMs to Wi-Fi enable devices used in an array of machine-to-machine (M2M) applications. By providing all of the necessary RF technology, networking stacks and advanced security features in a compact, single-board package, the embedded Airborne Model APMG-Q551 module allows OEM customers to incorporate AirborneAP™ technology into their 802.11 wireless design solutions. Big Performance in Small and Ruggedized Package The APMG-Q551 access point module delivers the industry's most rugged, highly-integrated, embedded Wi-Fi access point solution. Airborne modules meet extended operating temperature and shock/vibration specifications of the most demanding M2M applications. Utilizing a 32bit ARM9 processor and the high-performance Atheros AR6002 802.11 radio, the new Airborne modules deliver increased transmit power and receive sensitivity, contributing to superior range performance. The new Airborne SpeedLink roaming feature provides enhanced connection reliability, enabling OEM devices to roam freely within a wireless network without loss of data or connection. Airborne PowerSave firmware enables OEMs to maximize efficiency and reduce power consumption by as much as 70%. PowerSave capability is especially critical for battery-powered mobile devices. OEMs can choose to incorporate both transmit and receive diversity capability in their designs by utilizing the two U.FL antenna connectors on the modules. The APMG-Q551 modules are footprint and pin-compatible with their predecessors, dating back to the original introduction of the Airborne product family. Quatech's commitment to maintaining hardware and software compatibility assures OEMs of a simple, future-proof migration path even as wireless technology evolves. Enterprise Class Security Quatech's multi-layered security approach addresses the requirements of Enterprise-class networks and corporate IT departments. These advanced security features include wireless security (802.11i/ WPA2 Enterprise); network security (EAP authentication and certificate support); built-in firewalls on the Ethernet and WLAN interfaces; secure communications (built-in SSH functionality and fully encrypted data tunnels for secure management and data transfer); and device security (multi-level encryption capability to protect sensitive device configuration data). EAP security protocols are supported on the AirborneAP™ Access Point in client mode only. A unique Airborne security feature is the onboard delivery of certificates to the module and management of all authentication processes without requiring interaction from the host. This substantially reduces the resource requirements for OEMs whose devices operate in Enterprise-Class wireless. KEY FEATURES  Infrastructure Access Point/Wireless Router/Client  Supports up to 8 clients  802.11b/g WiFi Radio with 32bit ARM CPU  Airborne PowerSave firmware reduces power consumption and extends battery life in mobile devices  Extended Operating Temperature Range (-20OC to +85OC) and environmental specifications  Airborne SpeedLink roaming provides enhanced connection reliability  Advanced Enterprise Class wireless security (WPA2-Enterprise, WPA, WEP, EAP) *EAP support in client mode only Onboard certificate delivery and storage   Fully integrated serial bridge and network stack  Airborne PortFlex capability enables any combination of comm ports (UART, SPI, GPIO, Ethernet and 802.11 interfaces)  Reduces need for RF, networking and communications expertise  Quick time to market and reduced integration costs  FCC Part 15 Class B Sub C Modular Approval minimizes regulatory requirements  5 year warranty Markets Quatech has delivered high-performance device networking and connectivity solutions all over the world since 1983. Airborne embedded modules operate in a wide-range of M2M applications:  Industrial Automation & Control  Energy Management  Medical devices  Retail / Point of Sale products  Vehicle Telematics  Military Communications  Material Handling & Logistics  Test & Measurement  Security & Access control 707 Dayton Road | P.O. Box 1040 | Ottawa, IL 61350 +1 815.433.5100 | www.bb-elec.com Block Diagram Mechanical Outline Specifications Model Selection Guide Model # APMG-Q551 Description 802.11b/g, Industrial Access Point/Wireless Router/Client; 10/100 Ethernet, UART, SPI and RS-232/422/485 wired interfaces; WPA/WPA2 Enterprise Security Access Point Infrastructure Access Point/Wireless Router/Client, supports up to 8 clients Technology IEEE 802.11b/g, WiFi compliant Frequency 2.4 ~ 2.4835 GHz (US/Canada/Europe) 2.4 ~ 2.497 GHz (Japan) Modulation Technology DSSS, CCK, OFDM Modulation Type DBPSK, DQPSK, CCK, BPSK, QPSK, 16QAM, 64QAM Network Access Modes Access Point, Infrastructure, Ad Hoc Channels USA/Canada: 11 channels Europe: 13 channels France: 7 channels Japan: 14 channels (13 channels for 802.11g) Wireless Data Rate 802.11b = 11, 5.5, 2, 1 Mbps 802.11g = 54, 48, 36, 24, 18, 12, 9, 6 Mbps MAC CSMA/CA with ACK, RTS, CTS Network Protocols TCP/IP, ARP, ICMP, DHCP, DHS, UDAP, TFTP, UDP, PING Receive Sensitivity 54Mb/s 36Mb/s 18Mb/s 6Mb/s 11Mb/s 1Mb/s Security Protocols Disabled, WEP 64 & 128bit, WPA (TKIP), WPA (AES), WPA2 (AES), 802.1x (EAP) Supplicant 802.11I, WPA & WPA2 Enterprise supplicants (EAP-TLS, EAP-TTLS(MSCHAPv2), EAPTTLS(MDS5), EAP-PEAPv0(MSCHAPv2, LEAP), EAP-FAST, LEAP) Supports Certificates and Private Key Upload and Storage (Multiple) *Enterprise and EAP available in client mode only Antenna Two (2) U.FL coaxial connectors, 50 ohms, supports Rx and Tx diversity Supply 3.3VDC +/-5%, 850mA (MAX) Supply In-rush Current 3000mA (MAX) for 20ms DC Characteristics Operating Current (Tx, 802.11g) = 240mA Typ. Operating Current (Rx, 802.11g) = 310mA Typ. Power Save (Doze) = TBD mA Typ. Power Down (Sleep) = TBD mA Typ. Environmental Operating Temperature: -20°C - +85OC, Storage: -55OC - +150OC Relative humidity: 5% - 95% (non-condensing) Vibration: 20G peak-to-peak, 20Hz-2KHz swept Shock: 1500G peak-to-peak, 0.5mS duration Interfaces Dual UART (960KBAUD), RS232/422/485, SPI (1bit/20MHz), 10/100 Ethernet (Infrastructure Bridge Mode, NAT3 Router Mode), PortFlex Digital I/O 8 GPIO LED Indicators 4 indicator LED signals (RF_ACT, POST, CONNECT, RF_LINK), Signal Strength Connector 36 pin High Density SMT connector from Hirose (DF12-36DS-0.5V), 4mm Height Agency Approvals North America: FCC Title 47 Part 15 Class B Sub C Intentional Radiator, IOC RSS210 Europe: CE ETSI EN300 328 RoHS & WEEE compliant = = = = = = -75dBm -82dBm -88dBm -93dBm -88dBm -98dBm 707 Dayton Road | P.O. Box 1040 | Ottawa, IL 61350 +1 815.433.5100 | www.bb-elec.com © 2012 B&B Electronics Mfg. Co. Rev. B 2/2012