TEL0103

    WiFi Bee-MT7681 I/O Breakout Board SKU:TEL0103 INTRODUCTION The WiFi Bee I/O breakout board is a special board designed for the WiFi Bee-MT7681. It has a USB power port, a UART and three GPIO pins integrated on to the board. The use the DFRobot Gravity interface, meaning you can plug Gravity sensors and modules in directly, such as relays, buzzers, buttons, switches .etc. DFRobot also offers a variety of control options, including a mobile phone app (Android), web pages, AT commands etc. Users can choose the best control method according to their needs. In an occasional test, we found that the I/O breakout board is not only compatible with the WiFi Bee, but also compatible with Bluno Bee and Xbee modules, and support wireless GPIO control. FEATURES  Standard Xbee interface, compatible with WiFi Bee-MT7681 and other wireless modules  Supports USB independent power supply SPECIFICATION  Operating Voltage: 5V  Interface Type: Gravity XH2.54 Digital Sensor Pin  Dimension: 42 * 32 * 12 mm/ 1.65 * 1.26 * 0.47 inches  Weight: 8g SHIPPING LIST  WiFiBee-MT7681 IO Breakout Board x 1   https://www.dfrobot.com/product-1580.html 6-7-17