W5001BD

Cable Assembly Video Power Extension Cable Specifications Cable Length Connector Type A Connector Type B Diagram : 60ft, 100ft, 150ft : BNC (M) + DC (M) : BNC (M) + DC (F) L±L1mm Red Male yellow 10 2 TO CAM 4 Part Number L±L1mm W1801BD W3101BD W5001BD 18288±20 mm 30480±20 mm 45720±20 mm 1 0 6 1 7 1 2 6 9 7 1 9 2 TO DVR 2 3 2 2 8 male Red TO DVR SIDE ONLY 1 4 female red 2 male yellow 5 1 2 Cable Structure： Main Wire Jacket 4.0 Sub Wire Black Braid 21*0.12CCA Main Wire 4.0 Black Conductor Video Conductor 10*0.10BC Power Conductor 10*0.10BC Jacket Jacket Earth Wire BC 5 BC Sub Wire Black Braid 21*0.12CCA Video Conductor 18*0.10BC Power Conductor 18*0.10BC Jacket Black Conductor Earth Wire 5 29/03/22 BC BC V1.0 Cable Assembly Video Power Extension Cable Main Wire Jacket 4.0 Sub Wire Black Braid 31*0.12CCA Video Conductor 15*0.10BC Power Conductor 18*0.12BC Jacket Black Conductor Earth Wire BC 5 BC Dimensions : Millimeter 1. Cable W1801BD: [(10*0.10BC) * 2P+OD4.0mm ] * 1+(10X0.10mmBC+15X0.10mmBC) * 1C + BRAID(21*0.12CCA) Black PVC Jacket, O.D: 4.0mm ±0.1mm W3101BD: [(18*0.10BC) * 2P+OD4.0mm ] * 1+(10X0.10mmBC+15X0.10mmBC) * 1C + BRAID(21*0.12CCA) Black PVC Jacket, O.D: 4.0mm ±0.1mm W5001BD: [(15*0.10BC) * 1P+(18*0.12BC) * 1P+OD4.0mm ] * 1+(10X0.10mmBC+15X0.10mmBC) * 1C + BRAID(31*0.12CCA) Black PVC Jacket, O.D: 4.0mm ±0.1mm 2. Connector Type A BNC Male Soldering Blue PVC Jacket Brass Plated Pin 3. Connector Type B 2.1mm*5.5mm DC Male/Female Soldering Red PVC Jacket 4. Inner Molded LDPE 5. Outer Molded 45P PVC, Black Part Number Table Description 60 ft. Video Power Extension Cable 100 ft. Video Power Extension Cable 150 ft. Video Power Extension Cable Part Number W1801BD W3101BD W5001BD Important Notice : This data sheet and its contents (the “Information”) belong to the members of the EASE group of companies (the “Group”) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence. EASE is the registered trademark of Ease Electronics Co., Limited 2019. Page 29/03/22 V1.0