12401-01_T1

Reflective LCD + Front Light Dev Kit Development Kit Overview Key Features Drives LCD + Front Light at variable brightness levels Software included to easily upload custom graphics Supports variety of Sharp reflective memory displays, ranging from 1”-4.4” in size Pre-loaded for “out of the box” demonstrations USB interface Fully re-programmable with access to microprocessor debugging interface, GPIOs, and breakout pins Technical Specifications 32 bit ARM microcontroller Capable of driving virtually all memory LCDs in the 1.1”-4.4” range (board is sold configured for one specific display mode) Integrated front light driver, adjustable between 1-25mA through software control Pre-loaded “slideshow” firmware with images customizable through USB and provided PC software 2MB of SPI flash memory to store custom graphics Expansion port with full access to the MCU’s debugging interface plus GPIO, UART, I2C and SPI interfaces USB interface using standard serial drivers Adapters available to connect board to Raspberry Pi for programming and debugging USB-powered Lithium-ion charging circuit and battery connector (battery sold separately) Full source code, schematics and tools available for customizing the board’s firmware to customer applications Included in the Dev Kit Driver board Reflective LCD with integrated front light (variety of sizes available) Embedded software Display Size Display Manuf. Display Model Dev Kit 1.26” Sharp LS013B7DH05 $ 1.28” Sharp LS013B7DH03 $ 1.28” (c) JDI LPM013M126A $ 1.33” (c) Sharp LS013B7DH06/X $ 2.7” Sharp LS027B7DH01 $ 2.7” (c) JDI LPM027M128B $ 3.16” Sharp LS032B7DD02 $ 4.4” Sharp LS044Q7DH01 $ Others available on request (c) = color display Pricing and availability subject to change Optional lithium-ion battery and Raspberry Pi adapter sold separately FLEx and the FLEx logo are trademarks of FLEx Lighting II, LLC. The Sharp logo is a registered trademark of Sharp Corporation ©2017 FLEx Lighting II, LLC. All rights reserved. Document Number: 12376-01_T1 Buy now by contacting FLEx Lighting EMAIL info@flexlighting.com 773-295-0305 PHONE These product sheets are the proprietary product of FLEx Lighting II, LLC (“FLEx”) and may not be reproduced in any form without the express written consent of FLEx. The application examples in these specification sheets are provided to explain the representative applications of the device and are not intended to guarantee any industrial property right or other rights or license you to use them. FLEx assumes no responsibility for any problems related to any industrial property right of a third party resulting from the use of the device. FLEx reserves the right to make changes to the specifications, characteristics, data, materials, structures and other contents at any time without notice in order to improve design or reliability. FLEx takes no responsibility for damage caused by improper use of the device. Contact a FLEx sales representative for any questions about using this device.