DEUA1-04GI61SWASB

Datasheet USB DRIVE 3SE series - High performance with USB 3.0 interface - Low power consumption - Wear-Leveling supported - ECC engine coverage up to 60-bit/1024 Bytes - Metal housing for robust usage - 30μ golden finger for highly reliable data transfer quality Introduction The Innodisk USB Drive products provide high capacity USB flash memory storage that electrically complies with High-speed USB 3.0 interface & backward compatible with USB 2.0. The device features attractive small form factor and the connectivity over USB 3.0 and the NAND flash architecture provide a faster data transmission. www.innodisk.com USB DRIVE 3SE series Contact us for more information about the USB DRIVE 3SE. Diagram Innodisk is a service-driven provider of industrial embedded flash storage products and technologies, with a focus on the cloud computing, industrial/embedded, and aerospace and defense industries. Specifications Headquarters (Taiwan) 5F., No.237, Sec. 1, Datong Rd., Xizhi Dist., New Taipei City 221, Taiwan (R.O.C.) Tel: +886-2-77033000 Email: sales@innodisk.com Interface Flash Type Capacity Max. Channels Branch Offices: Sequential R/W (MB/sec, max.) USA usasales@innodisk.com +1-510-770-9421 Europe eusales@innodisk.com +31-(0)40-282-1818 Japan jpsales@innodisk.com +81-45-594-7581 China sales_cn@innodisk.com +86-755-21673689 www.innodisk.com *. S/A = Flash mode ** . A = BGA / 1=TSOP Max. Power Consumption USB 3.0 SLC 4GB~32GB 1 100 / 85 0.70 W (5V x 140 mA ) Thermal Sensor - External DRAM buffer - H/W Write Protect ATA Security - S.M.A.R.T. - Dimension (WxLxH) 16.5 X 48.3 X 7.6 mm Vibration: 20G @7~2000Hz © 2021 Innodisk Corporation. All right reserved. Specifications are subject to change without prior notice. Environment Shock: 1500G @ 0.5ms Storage Temperature: -40°C ~ +85°C MTBF: 3 million hours 20211005 Ordering Information Operation Temp. Standard Grade (0°C ~ +70°C) Industrial Grade (-40°C ~ +85°C) 4GB 8GB 16GB 32GB DEUA104GI61*C**SB DEUA108GI61*C**SB DEUA116GI61*C**SB DEUA132GI61SCASB DEUA104GI61*W**SB DEUA108GI61*W**SB DEUA116GI61*W**SB DEUA132GI61SWASB *. S/A = Flash mode ** . A = BGA / 1=TSOP www.innodisk.com