237.1-30-30-A

EN 237.1 Hinges Technopolymer Plastic, Combination Types Metric Original design CFM. 3 Type A 2x2 bores for countersunk screws B 2x2 bores for socket cap screws C 2x2 threaded studs D 2x bores for countersunk screws 2x threaded studs E 2x bores for socket cap screws 2x threaded studs Metric table Dimensions in: millimeters - inches 1 2 l1 l2 d1 d2 d3 h1 h2 h3 h4 ≈ l3 l4 m1 ±0.2 m 2 ±0.2 t 30 *  1.18 40  1.57 50  1.97 60  2.36 30  1.18 - 4.5 0.18 2.5 0.10  7  0.28 3.5 0.14 4 0.16  8  0.31 10.5  0.41 - 18  0.71 18  0.71 1.3 0.05 40  1.57 50  1.97 60  2.36 M5 5.5 0.22 6.5 0.26 8.5 0.33 4 0.16 6 0.24 8 0.31  9  0.35 11.5  0.45 15  0.59 5 0.20 6 0.24 8 0.31 5.5 0.22 6.5 0.26 8.5 0.33 11  0.43 13  0.51 17  0.67 14  0.55 18  0.71 21  0.83 12  0.47 12  0.47 14.5  0.57 25  0.98 30  1.18 36  1.42 25  0.98 30  1.18 36  1.42 1.7 0.07 3 0.12 4 0.16 Thread M6 M8 * Only available in black, Type A and Type B Specification 4 • Body EN 237.1 hinges are characterized by their compact and stable design. Plastic Technopolymer (Polyamide PA-HP) -- Glass fiber reinforced -- Temperature resistant up to 285 °F (140 °C) -- Black, matte finish — WS -- White, RAL 9002, matte finish (only available in Type A) • Pin Stainless steel AISI 303 • Threaded studs Steel, nickel plated • Load Rating Information → page 2095 • Plastic Characteristics → page 2135 • Stainless • RoHS 1334 | Information Steel Characteristics → page 2143 compliant see also... • List of Hinge Types → page 1324 • Hinges GN 237 (Zinc Die-Cast / Stainless Steel / Aluminum ) → page 1330 • Lift-Off Hinges EN 337.1 → page 1408 How to order (Black) 1 2 3 EN 237.1-40-40-C How to order (White) 1 2 3 4 EN 237.1-50-50-A-WS WARNING: Cancer and Reproductive Harm — www.P65Warnings.ca.gov 1 Width l1 2 Length l 2 3 Type 1 Width l1 2 Length l 2 3 Type 4 Color www.jwwinco.com | phone: 1-800-877-8351