6N25X17

GN 432 GN 431 Wing Nuts / Wing Screws Nut Screw Stainless Steel Inch | Metric Inch table Dimensions in: inches - millimeters 1 2 d1 d2 d3 b h t   .98 25   1/4 x 20   .31  8   .31  8   .39 10   .28  7  1.18 30 5/16 x 18   .39 10   .39 10   .47 12   .35  9  1.42 36   3/8 x 16   .47 12   .47 12   .57 14.5   .39 10 Thread GN 432 min. Metric table Dimensions in: millimeters - inches 1 2 d1 d2 Length l 25   .98 M 6 16   .63 20   .79 25   .98 30  1.18 M 6 16   .63 20   .79 30  1.18 M 8 16   .63 36  1.42 M 8 36  1.42 M 10 Thread GN 432 / GN 431 3 d3 b h t -  8   .31  8   .31 10   .39 7  .28 25   .98 - 10   .39 10   .39 12   .47 7  .28 20   .79 25   .98 32  1.26 10   .39 10   .39 12   .47 9  .35 16   .63 20   .79 25   .98 32  1.26 12   .47 12   .47 14.5   .57 9  .35 20   .79 30  1.18 40  1.57 - 12   .47 12   .47 14.5   .57 7  .28 min. Specification Information • Wing body Stainless steel, sintered European Standard No. 1.4404 (AISI 316 LHC) Matte shot-blasted finish Where a greater torque is required GN 432 wing nuts and GN 431 wing screws are a better solution than knurled nuts. • Threaded stud Stainless steel European Standard No. 1.4301 (AISI 304) -- Matte shot-blasted finish -- Screwed in and secured by a cross-dowel pin • RoHS compliant see also... • Wing Nuts GN 834 (Stainless Steel) • Wing Screws GN 835 (Stainless Steel) How to order (Inch wing nut) 1 Handle diameter d1 GN 432-36-3/8X16 2 Thread d 2 How to order (Metric wing screw) 1 Handle diameter d1 2 Thread d 2 3 Length l 1 1 2 2 3 GN 431-25-M6-20 2 | 2.2 Tensioning, Clamping with Knobs www.jwwinco.com | phone: 1-800-877-8351