3N10P04

DIN 464 Knurled Thumb Screws Steel / Stainless Steel Metric Metric table 1 Dimensions in: millimeters - inches 2 d1 Length l M 2  4   .16  6   .24  8   .31 10   .39 - - - M   2.5  4   .16  6   .24  8   .31 10   .39 12   .47 - M 3  6   .24  8   .31 10   .39 12   .47 16   .63 M 4  5   .20  8   .31 10   .39 12   .47 M 5  6   .24  8   .31 10   .39 M 6  8   .31 10   .39 M 8 12   .47 M 10 12   .47 Thread d2 d3 h k -  9   .35  4.5   .18  5.3   .21 2  .08 - - 11   .43  5   .20  6.5   .26 2.5  .10 20   .79 - - 12   .47  6   .24  7.5   .30 2.5  .10 16   .63 20   .79 25   .98 - 16   .63  8   .31  9.5   .37 3.5  .14 12   .47 16   .63 20   .79 25   .98 30  1.18 20   .79 10   .39 11.5   .45 4  .16 12   .47 16   .63 20   .79 25   .98 30  1.18 35  1.38 24   .94 12   .47 15   .59 5  .20 16   .63 20   .79 25   .98 30  1.18 35  1.38 40  1.57 - 30  1.18 16   .63 18   .71 6  .24 15   .59 20   .79 25   .98 30  1.18 35  1.38 40  1.57 - 36  1.42 20   .79 23   .91 8  .31 Specification • Steel -- Tensile strength class 5 -- Visible face fine turned -- Blackened finish -- Zinc plated, blue passivated finish • Stainless steel European Standard No. 1.4305 (AISI 303) Matte shot-blasted finish 3 Information DIN 464 knurled thumb screws are machined from solid bar. — ZB NI • RoHS compliant see also... • Flat Knurled Thumb Screws DIN 653 • Flat Knurled Thumb Screws GN 653.2 (with Recessed Stud for Loss Protection) • Knurled Screws GN 535 (Stainless Steel) • Knurled Thumb Screws DIN 464 with Loss Protection GN 111.7 How to order (Steel, blackened) 1 Thread d1 2 Length l 1 Thread d1 2 Length l 3 Finish How to order (Stainless steel) 1 Thread d1 1 2 Length l 3 Material 1 2 DIN 464-M6-20 How to order (Steel, zinc plated) 1 2 3 DIN 464-M2.5-6-ZB 2 3 DIN 464-M10-35-NI 2 | 2.2 Tensioning, Clamping with Knobs www.jwwinco.com | phone: 1-800-877-8351