50.45-HF-32-7-5.5

GN 50.45 Stainless Steel-Retaining magnets 3.5 3.4 3.3 3.2 3.1 disc-shaped, with bore 2 Material of the magnet SC d3 d4 d5 h t d3 d5 h t HF Hard ferrite SC SmCo 20 ±0,1 25 ±0,1 4,1 5,5 - 10   11,5 -  6 +0,2/-0,1  7 +0,3/-0,2 - 4,5 4,5  8  8 6 ±0,1 7 ±0,2 3,5 4  22  29  60  80 32 ±0,1 5,5 - 11,5 -  7 +0,3/-0,2 - 5,5 11 7 ±0,2 4  58 200 40 +0,2/-0,1 5,5 - 11,5 -  8 +0,4/-0,2 - 5,5 10,5 8 ±0,2 4  72 420 50 +0,2/-0,1 - 8,5 - 22 10 +0,5/-0,2  8,5 - - - - 145 - - 6,5 - 24 14 +0,5/-0,2 12   - - - - 230 - • Housing Stainless Steel 1 Information Stainless Steel-Retaining magnets GN 50.45 are a shielded magnetic system. • Materials of the magnet: Owing to the lower magnetic conductivity of the Stainless Steel housing, -- Hard ferrite HF the magnetic forces are lower than in steel. temperature resistant up to 220 °C To ensure that the magnetic properties (magnetic forces) are not im-- SmCo SC paired, the fixing screws must be made of non-magnetic material. Samarium, cobalt see also... temperature resistant up to 350 °C • More information to retaining magnets → Page 1380 ff. • RoHS • Holding discs GN 70 → Page 1414 On request • Raw magnets in ring shape in hard ferrite (HF) How to order 1 2 GN 50.45-HF-50 1 Material of the magnet 2 d1 3.9 Holding with magnets | Page 1389 3.8 Specification 3.9 63 +0,3/-0,1 3.6 Nominal magnetic forces in N d2 3.7 Material of the magnet HF d1