8NCC1/E

GN 5335 Star Knobs Stainless Steel AISI 303 (A1), with Tapped or Plain Bore, or Blank Type Inch | Metric 3 Type A C D E Specification 4 • Stainless steel European Standard No. 1.4305, A1 (AISI 303) -- Matte shot-blasted finish — -- Highly polished finish PL (only available in Type D, E in metric sizes) • RoHS compliant Without bore With plain blind bore, tol. H7 With tapped through bore With tapped blind bore Information GN 5335 star knobs are manufactured from solid stainless steel bar stock. These decorative star knobs were primarily manufactured for the food processing machinery industry and yet, there are numerous other fastening or clamping applications in non-corrosive environments that these knobs can be used for. see also... • Triangular Knobs GN 5339.5 (Stainless Steel) • Star Knobs GN 5334 (Stainless Steel) • Wing Nuts GN 834 (Stainless Steel) • Star Knobs DIN 6336 (Stainless Steel) • Hand Knobs DIN 6335 (Stainless Steel) On request • Three-Lobed Knobs GN 5345 (Stainless Steel) • Special inch and metric bores or threads • Other modifications such as cross holes and set screw holes How to order (Without bore) 1 3 GN 5335-60-A How to order (Inch) 1 2 3 GN 5335-50-B3/8-C How to order (Metric) 1 2 3 4 GN 5335-40-M8-E-PL 2 | 2.2 Tensioning, Clamping with Knobs 1 Handle diameter d1 3 Type 1 Handle diameter d1 2 Bore d 3 (Thread d 2 ) 3 Type 1 Handle diameter d1 2 Thread d 2 (Bore d 3 ) 3 Type 4 Finish www.jwwinco.com | phone: 1-800-877-8351 GN 5335 Star Knobs continued Inch table 1 2 d1 d2 Thread Type D / Type E Dimensions in: inches - millimeters 2 d 3 +0.001 Bore Type C - d4 h1 h2 .71 1.20 30.5 15 .71 1.20 30.5 15 .83 1.34 34 17 .83 1.34 34 17 1.57 40 1/4 x 20 1.57 40 5/16 x 18 B 5/16 1.97 50 5/16 x 18 - 1.97 50 3/8 x 16 B 3/8 2.36 60 3/8 x 16 - .98 25 1.54 39 18 2.36 60 1/2 x 13 B 1/2 .98 25 1.54 39 18 h1 h2 .71 30.5 1.20 15 .71 30.5 1.20 15 .83 34 1.34 17 .83 34 1.34 17 .98 39 1.54 18 .98 39 1.54 18 18 18 21 21 t1 min. .59 .59 .67 .67 .71 .71 12 15 2 d2 d 3 H7 .71 18 13 16 16 .51 .51 .63 .63 .71 .79 20 .87 22 .79 20 18 2 d4 40 1.57 M 6 - 18 40 1.57 M 8 B 8 18 50 1.97 M 8 - 21 50 1.97 M 10 B 10 21 60 2.36 M 10 - 25 60 2.36 M 12 B 12 25 www.jwwinco.com | phone: 1-800-877-8351 .59 13 Dimensions in: millimeters - inches 1 d1 Bore Type C .59 15 Metric table Thread Type D / Type E .47 t2 t1 min. .59 .59 .67 .67 .71 .71 12 15 .47 .59 15 18 18 22 .59 .71 .71 .87 t2 13 13 16 16 20 20 .51 .51 .63 .63 .79 .79 2.2 Tensioning, Clamping with Knobs | 3