55.3-AN-8-25

GN 55.3 Raw magnets rod-shaped 2 d 3 Length l ±0,1 Nominal magnetic forces in N Temperature resistance in °C  3 10  1,1 450 10  3 12  1,3 450 10 0 −0,2 Packaging units  4 16  1,9 450 10  4 20   2   450 10  5 20  2,3 450 10  6 15  2,8 350  6  6 24  2,8 450  6  6 30  2,8 450  6  8 25  3,8 450  6  8 32  3,8 450  4 10 20   5   350  6 10 40   7   450  2 12 40   8   450  2 12 48   8   450  2  2 15 30 10   350 15 60 11   450  1 20 40 17   350  1 34 80 61   350  1 Specification 1 Information • Material of the magnet: Raw magnets GN 55.3 are unshielded rod-shaped magnets. AlNiCo AN Owing to their vast range of different sizes, they are suitable for virtually Aluminum, nickel, cobalt universal use. They are mostly attached by pressing in or gluing. blank When used without air gap, individual raw magnets always have lower • RoHS magnetic forces than a magnet system in which shielding and magnetic return enormously intensify the force acting at the adhesion surface. On request Depending on the air gap between magnet and mating component, in• special lengths dividual raw magnets - unlike magnet systems - can have substantially higher magnetic forces. In the event that no suitable retaining magnets / magnet systems are available, raw magnets may be used in combination with appropriate holding constructions to build up highly specific magnet systems. see also... • More information to raw magnets → Page 1380 ff. How to order 1 2 3 GN 55.3-AN-10-40 Page 1412 | 3.9 Holding with magnets 1 Material of the magnet 2 d 3 Length l