565.5-20-M6-160-A-GS

GN 565.5 Cabinet “U” Handles Stainless Steel, with Tapped or Counterbored Through Holes Inch | Metric 4 Type A Mounting from the back (tapped blind hole) B Mounting from the operator’s side Specification 5 Information • Stainless steel -- Type A: European Standard No. 1.4301 (AISI 304) -- Type B: fine die-cast European Standard No. 1.4308 (AISI CF-8) -- Matte shot-blasted finish GS -- Slip polished, glossy metallic finish GP (only Type A in metric sizes) GN 565.5 cabinet “U” handles are often used in the food industry or other such applications where a non-corrosive material is necessary. The shape of this sturdy handle has good ergonomic features. • RoHS compliant • Cabinet “U” Handles GN 425 (Stainless Steel) Type A cabinet “U” handles are manufactured from a bent aluminum profile. The manufacturing process allows the production of special lengths in relatively small quantities. see also... • Cabinet “U” Handles GN 565 (Aluminum) • Cabinet “U” Handles GN 426.5 (Stainless Steel) • ”Economical” Cabinet “U” Handles GN 728.5 (Stainless Steel, Mounting from the Back or from the Operator‘s Side) On request • Special lengths • Various inch and metric size fasteners and kit packaging How to order (Inch) 1 2 3 4 5 GN 565.5-20-1/4X20-112-A-GS How to order (Metric) 1 2 3 4 5 GN 565.5-20-M6-160-A-GP 4 | 1.2 Operating by Using Machine and Device Handles 1 Handle width b 2 Thread d1 3 Length l 4 Type 5 Finish 1 Handle width b 2 Thread d1 (Bore d 2 ) 3 Length l 4 Type 5 Finish www.jwwinco.com | phone: 1-800-877-8351 GN 565.5 Cabinet “U” Handles continued Inch table 1 2 b d1 Dimensions in: inches - millimeters 3 Length l ±0.01 Thread a h1 h2 r t1 .79 20 1/4 x 20 4.41 112 13 .51 1.93 49 .53 13.5 13 .79 20 1/4 x 20 5.04 128 13 .51 2.01 51 .53 13.5 13 .79 20 1/4 x 20 6.30 160 13 .51 2.01 51 .53 13.5 13 t2 min. Type A Shot-blasted GS .51 10 .51 10 .51 10 .39 .22 5.5 .39 .22 5.5 .39 .22 5.5 Metric table 1 2 2 b d1 d2 20 20 20 20 20 20 20 Thread .79 .79 .79 .79 .79 .79 .79 Bore Dimensions in: millimeters - inches 3 Length l ±0.25 a h1 h2 r .51 49 1.93 13.5 .53 13 .51 51 2.01 13.5 .53 13 .51 51 2.01 13.5 .53 13 .51 51 2.01 - 13 .51 51 2.01 - 13 .51 51 2.01 - 13 .51 51 2.01 - 13 t1 min. Type A Type A Type B Shot-blasted GS Slip polished GP Shot-blasted GS M6 5.4 .21 112 4.41 112 4.41 112 4.41 13 M6 5.4 .21 128 5.04 128 5.04 128 5.04 13 M6 5.4 .21 160 6.30 160 6.30 160 6.30 13 M6 - 200 7.87 200 7.87 - 13 M6 - 250 9.84 - - 13 M6 - 300 11.81 - - 13 M6 - 400 15.75 - - 13 www.jwwinco.com | phone: 1-800-877-8351 .51 .51 .51 .51 .51 .51 .51 10 10 10 10 10 10 10 t2 .39 5.5 .22 .39 5.5 .22 .39 5.5 .22 .39 .39 .39 .39 - 1.2 Operating by Using Machine and Device Handles | 5