MCB1857U

Keil MCB1800 Evaluation Board Overview Page 1 of 2 MCB1800 Evaluation Board and Starter Kit The Keil MCB1800 Evaluation Boards enable you to create and test working programs based on the NXP LPC1850 family of ARM Cortex™-M3 processor-based devices. The MCB1800 Evaluation Board is available in two different configurations: ◾ The MCB1850 Evaluation Board is populated with an NXP LPC1850 device ◾ The MCB1857 Evaluation Board is populated with a NXP LPC1857 device Features ◾ 180MHz ARM Cortex-M3 processor-based MCU in LBGA256 ◾ On-Chip SRAM: 136KB (LPC1857), 200KB (LPC1850) ◾ On-Chip Flash: 1MB dual bank (LPC1857), no on-chip Flash (LPC1850) ◾ On-Board Memory: 16MB NOR Flash, 4MB Quad-SPI Flash, 16 MB SDRAM, & 16KB EEPROM (I2C) ◾ Color QVGA TFT LCD with touchscreen ◾ 10/100 Ethernet Port ◾ High-speed USB 2.0 Host/Device/OTG interface (USB host + Micro USB Device/OTG connectors) ◾ Full-speed USB 2.0 Host/Device interface (USB host + micro USB Device connectors) ◾ CAN interfaces ◾ Serial/UART Port ◾ MicroSD Card Interface ◾ 4 user push-buttons + reset ◾ Digital Temperature Sensor (I2C) ◾ Analog Voltage Control for ACD Input ◾ Audio CODEC with Line-In/Out and Microphone/headphone connector + Speaker ◾ Debug Interface Connectors ◾ 20-pin JTAG (0.1 inch) ◾ 10-pin Cortex debug (0.05 inch) ◾ 20-pin Cortex debug + ETM Trace (0.05 inch) Development Software The MCB1800 Evaluation Board and Starter Kit includes the MDK-ARM Lite Edition Tools. These tools help you get started writing programs and testing the microcontroller and its capabilities. Sample applications that run on the MCB1800 evaluation board, and a Quickstart guide are included. Ordering Information The MCB1800 is available as a stand alone evaluation board or as a starter kit which includes the ULINK-ME debug adapter. ◾ MCB1850: MCB1850 evaluation board ◾ MCB1850UME: MCB1850 starter kit (includes ULINK-ME) ◾ MCB1857: MCB1857 evaluation board - available Q3,12 Page 2 of 2 ◾ MCB1857UME: MCB1857 starter kit (includes ULINK-ME) - available Q3,12 Contact Us | Site Feedback | Terms of Use | Privacy Policy Copyright © 2013 ARM Ltd and ARM Germany GmbH. All rights reserved. http://www.keil.com/mcb1800/ 4/20/2015