B3000MS045

File Downloads • Schematic of EXT3-Touch board (pdf - 88.27Kb) The Touch Expansion Board for EXT3 (EXT3-Touch) opens a new dimension for EPDs. Instead of being passive, they can now act as input devices for any interactive interface, like Human Machine Interface (HMI) and thermostat. This is also a perfect configuration for ultra-low power IoT remote controls. Note: this EXT3-Touch board needs to work with EXT3-1 board which is included in this kit. Model no. B3000MS045 • • • • • • 3 ZIF connectors specifically placed for the 3.70″ (,2.71″ and future sizes) of Touch EPDs made by Pervasive Displays A 34-way flat cable (FFC) connects the EXT3-1 Touch board to the EXT3-1 board could be placed on top Exposes 4 pins for the touch controller from your EVK With this kit, there are cooper pillars, screws and nuts set to fix these two boards Driver firmware is available for each EPD and touch controller as open-source license-free examples The Pervasive Displays Library Suite (PDLS) fully supports this kit and brings a complete set of GUI elements Find the detailed introduction of EXT3-Touch kit here. EXT3-Touch with3.70” Touch EPD Note: the 3.70″ Touch EPD is excluded in this kit. EXT3-Touch with 2.71” Touch EPD Note: the 2.71″ Touch EPD is excluded in this kit. Contact us if you need the 2.71″ Touch EPD. Touch Expansion Board for EXT3 (EXT3-Touch) - Pervasive Displays/6-14-22