SESD5V0V1BLATR

SESD5V0V1BLA Technical Data Data Sheet N2129, Rev. - SESD5V0V1BLA Bidirectional ESD Diode Description SESD5V0V1BLA is a very low capacitance bidirectional ElectroStatic Discharge (ESD) protection diodes. It’s designed in a DFN1006 leadless ultra small Surface Mounted Device (SMD) plastic package to protect one signal line from the damage caused by ESD and other transients. DFN1006-2L Circuit Diagram Features Ultra small SMD plastic package Bidirectional ESD protection of one line Max. Peak pulse power: Ppp=45W Low clamping voltage: VCL=12.5V Ultra low leakage current ESD protection up to 30KV IEC 61000-4-2(ESD)±15KV(air),±8KV(contact) IEC 61000-4-5 (surge) ;4A (8/20us)         Applications         Mechanical Characteristics Computers and peripherals Communication systems Audio and video equipment Portable electronics Cellular handsets and accessories 10/100 Mbit/s Ethernet Subscriber Identity Module card protection FireWire    DFN1006-2L package Marking: X1 Molding compound flammability rating: UL 94V-0  China - Germany - Korea - Singapore - United States   http://www.smc-diodes.com - sales@ smc-diodes.com  SESD5V0V1BLA Technical Data Data Sheet N2129, Rev. - Maximum Ratings Characteristics Symbol Max. Units Peak Pulse Power (tp=8/20us) PPK 45 Watts Peak Pulse Current (tp=8/20us) IPP 4 A Lead Soldering Temperature TL 260(10 seconds) ℃ Operating Temperature TJ 150 ℃ TSTG -65 to +150 ℃ Storage Temperature Electrical Characteristics(T=25℃ unless otherwise specified) Characteristics Reverse Stand-Off Voltage Symbol Condition Min. Typ. VRWM 5.8 7.5 Max. Units 5.0 V 7.8 V Breakdown Voltage VBR IR=5mA Reverse Leakage Current IRM VRWM=5V,T=25℃ 10 nA Clamping Voltage VC IPP=4A, tp=8/20us 12.5 V Diode Capacitance Cd VR=0V, f=1MHz 15 pF Differential Resistance Rdif IR=5mA 35 Ω 13  China - Germany - Korea - Singapore - United States   http://www.smc-diodes.com - sales@ smc-diodes.com  SESD5V0V1BLA Technical Data Data Sheet N2129, Rev. - Ratings and Characteristics Curves Fig 1. 8/20us Pulse Waveform Fig3. Capacitance as a function of Reverse Voltage Fig 2. Relative Variation of Peak Pulse Power as a function of Junction Temperature Fig4. Characteristics for a Bidirectional ESD Protection Diode  China - Germany - Korea - Singapore - United States   http://www.smc-diodes.com - sales@ smc-diodes.com  SESD5V0V1BLA Technical Data Data Sheet N2129, Rev. - Mechanical Dimensions Marking Diagram X1 = device code Ordering Information: Device Package Shipping SESD5V0V1BLA DFN1006-2L 5000pcs/ reel For information on tape and reel specifications, including part orientation and tape sizes, please refer to our tape and reel packaging specification.  China - Germany - Korea - Singapore - United States   http://www.smc-diodes.com - sales@ smc-diodes.com  SESD5V0V1BLA Technical Data Data Sheet N2129, Rev. DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the SMC Diode Solutions sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall SMC Diode Solutions be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). SMC Diode Solution assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall SMC Diode Solutions be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or SMC Diode Solutions. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of SMC Diode Solutions. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations..  China - Germany - Korea - Singapore - United States   http://www.smc-diodes.com - sales@ smc-diodes.com 