UHP 252010BF-100M

TAI-TECH P2 Power Inductor UHP-SERIES 1. Features 1. This specification applies Low Profile Power Inductors. 2. 100% Lead(Pb) & Halogen-Free and RoHS compliant. 3.Operating temperature:-40~+125℃ (Including self - temperature rise) Halogen Halogen-free 2. Dimension Recommended PC Board Pattern H L G Series A(mm) A’(mm) B(mm) B’(mm) UHP160808TF 1.60±0.15 1.80Max 0.90±0.15 1.10 Max UHP201210RF 2.00±0.2 2.34 Max 1.20±0.2 1.50 Max C(mm) D(mm) E(mm) Size L(mm) G(mm) H(mm) 0.80 Max 0.50 ref 0.60 ref 160808 1.80 0.60 0.96 1.00 Max 0.70 ref 0.60 ref 201210 2.40 0.60 1.44 H L Series A(mm) B(mm) C(mm) D(mm) E(mm) UHP201608EF 2.0 -0.1/+0.2 1.6 -0.1/+0.2 0.80max 0.60 ref 0.80 ref G Size 201608 /201609 /201610 252010 /252012 Series A(mm) B(mm) C(mm) D(mm) E(mm) UHP201609NF 2.0 -0.1/+0.2 1.6 -0.1/+0.2 0.95max 0.60 ref 0.80 ref UHP201610NF 2.0 -0.1/+0.2 1.6 -0.1/+0.2 1.0max 0.60 ref 0.80 ref UHP252010BF/NF 2.5 -0.1/+0.2 2.0 -0.1/+0.2 1.0max 0.85 ref 0.80 ref UHP252012BF/NF 2.5 -0.1/+0.2 2.0 -0.1/+0.2 1.2 max 0.85 ref 0.80 ref www.tai-tech.com.tw L(mm) G(mm) H(mm) 2.3 0.7 1.7 2.6 0.8 2.1 TAI-TECH P3 3. Part Numbering UHP 201608 EF A B A: Series B: Dimension C: Lead Free D: Inductance E: Inductance Tolerance UHP UHP C A B - C M D E 100 M D E 4R7 M D E Material 100=10uH M=±20% 252010 BF A: Series B: Dimension C: Lead Free D: Inductance E: Inductance Tolerance 1R0 Material 1R0=1.0uH M=±20% 201609 NF A B A: Series B: Dimension C: Lead Free D: Inductance E: Inductance Tolerance - - C Material 4R7=4.7uH M=±20% Y=±30% 4. Specification DCR (Ω) Part Number Inductance (uH)±20% @0A Test Frequency (Hz) I rms (mA) I sat (mA) UHP160808TF-1R0M 1.00 1V/1M 1150 800 0.150 UHP160808TF-2R2M 2.20 1V/1M 750 520 0.345 UHP160808TF-4R7M 4.70 1V/1M 500 370 0.750 UHP160808TF-100M 10.0 1V/1M 300 210 1.760 Part Number Inductance (uH)±20% @0A Test Frequency (Hz) I rms (mA) I sat (mA) DCR (Ω) ±20% UHP201210RF-1R0M 1.00 0.5V/7.9M 2100 1100 0.062 UHP201210RF-2R2M 2.20 0.5V/7.9M 1400 750 0.150 UHP201210RF-4R7M 4.70 0.5V/7.9M 1000 470 0.320 UHP201210RF-100M 10.0 0.5V/2.5M 600 320 0.590 Part Number Inductance (uH)±20% @0A Test Frequency (Hz) I rms (A) I sat (A) Typ Typ Typ Max UHP201608EF-1R0M 1.00 1V/1M 1.10 1.40 0.115 0.140 UHP201608EF-2R2M 2.20 1V/1M 0.90 1.10 0.220 0.260 UHP201608EF-4R7M 4.70 1V/1M 0.60 0.80 0.430 0.510 UHP201608EF-100M 10.0 1V/1M 0.45 0.55 1.10 1.30 www.tai-tech.com.tw Max DCR (Ω) TAI-TECH P4 I rms (A) I sat (A) Part Number Inductance (uH)±20% @0A Test Frequency (Hz) Typ Max Typ Max UHP201609NF-R33M 0.33 0.1V/1M 2.40 2.10 2.40 2.10 0.028 UHP201609NF-R47M 0.47 0.1V/1M 2.30 2.00 2.30 2.00 0.038 UHP201609NF-R68M 0.68 0.1V/1M 1.80 1.50 1.80 1.50 0.055 UHP201609NF-1R0M 1.00 0.1V/1M 1.70 1.40 1.70 1.40 0.065 UHP201609NF-1R5M 1.50 0.1V/1M 1.40 1.20 1.40 1.20 0.110 UHP201609NF-2R2M 2.20 0.1V/1M 1.10 0.90 1.10 0.90 0.160 UHP201609NF-3R3M 3.30 0.1V/1M 1.00 0.85 1.00 0.85 0.250 UHP201609NF-4R7M 4.70 0.1V/1M 0.90 0.75 0.90 0.75 0.400 UHP201609NF-6R8M 6.80 0.1V/1M 0.75 0.65 0.75 0.65 0.550 UHP201609NF-100M 10.0 0.1V/1M 0.60 0.55 0.70 0.60 1.00 Part Number Inductance (uH)±20% @0A Test Frequency (Hz) Typ Max Typ Max UHP201610NF-R47Y 0.47 0.1V/1M 2.60 2.35 3.00 2.70 0.044 UHP201610NF-R68Y 0.68 0.1V/1M 2.25 2.05 2.45 2.00 0.062 UHP201610NF-1R0Y 1.00 0.1V/1M 1.75 1.60 1.95 1.80 0.080 UHP201610NF-1R5Y 1.50 0.1V/1M 1.40 1.26 1.65 1.46 0.130 UHP201610NF-2R2M 2.20 0.1V/1M 1.35 1.20 1.45 1.26 0.145 UHP201610NF-3R3M 3.30 0.1V/1M 1.05 0.95 1.05 0.90 0.245 UHP201610NF-4R7M 4.70 0.1V/1M 1.00 0.90 0.85 0.77 0.360 UHP201610NF-6R8M 6.80 0.1V/1M 0.70 0.55 0.80 0.72 0.500 UHP201610NF-100M 10.0 0.1V/1M 0.50 0.45 0.62 0.55 0.720 0.1V/1M 0.40 0.36 0.50 0.45 1.400 0.34 0.45 0.40 1.800 0.27 0.43 0.38 2.000 UHP201610NF-150M 15.0 I rms (A) I sat (A) DCR (Ω) ±20% DCR (Ω) ±20% UHP201610NF-180M 18.0 0.1V/1M 0.38 UHP201610NF-220M 22.0 0.1V/1M 0.30 TAI-TECH Part Number Inductance (uH)±20% @0A Test Frequency (Hz) Typ Max Typ UHP252010BF/NF-R47Y 0.47 0.1V/1M 2.80 2.50 2.85 2.57 0.030 UHP252010BF/NF-R68Y 0.68 0.1V/1M 2.45 2.20 2.70 2.45 0.039 UHP252010BF/NF-1R0Y 1.00 0.1V/1M 2.20 1.80 2.45 2.05 0.055 UHP252010BF/NF-1R0M 1.00 0.1V/1M 2.20 1.80 2.45 2.05 0.055 UHP252010BF/NF-1R5Y 1.50 0.1V/1M 1.70 1.55 1.80 1.70 0.090 UHP252010BF/NF-2R2M 2.20 0.1V/1M 1.55 1.40 1.60 1.55 0.114 UHP252010BF/NF-3R3M 3.30 0.1V/1M 1.25 1.10 1.30 1.10 0.170 UHP252010BF/NF-4R7M 4.70 0.1V/1M 1.05 0.92 1.10 0.95 0.250 UHP252010BF/NF-6R8M 6.80 0.1V/1M 0.85 0.76 0.95 0.80 0.370 UHP252010BF/NF-100M 10.0 0.1V/1M 0.75 0.67 0.75 0.65 0.470 UHP252010BF/NF-150M 15.0 0.1V/1M 0.55 0.50 0.55 0.45 0.750 UHP252010BF/NF-220M 22.0 0.1V/1M 0.50 0.45 0.50 0.40 1.120 I rms (A) www.tai-tech.com.tw I sat (A) Max DCR (Ω) ±20% TAI-TECH P5 I rms (A) I sat (A) TAI-TECH Part Number Inductance (uH)±20% @0A Test Frequency (Hz) Typ Max Typ Max UHP252012BF/NF-R47Y 0.47 0.1V/1M 3.70 3.35 4.00 3.60 0.028 UHP252012BF/NF-R68Y 0.68 0.1V/1M 3.30 3.00 3.00 2.70 0.036 UHP252012BF/NF-1R0Y 1.00 0.1V/1M 2.60 2.30 2.70 2.45 0.049 UHP252012BF/NF-1R5Y 1.50 0.1V/1M 2.20 1.95 2.30 2.05 0.063 UHP252012BF/NF-2R2M 2.20 0.1V/1M 1.85 1.65 2.15 1.95 0.080 UHP252012BF/NF-3R3M 3.30 0.1V/1M 1.45 1.30 1.70 1.50 0.120 UHP252012BF/NF-4R7M 4.70 0.1V/1M 1.20 1.05 1.50 1.35 0.176 UHP252012BF/NF-6R8M 6.80 0.1V/1M 1.00 0.90 1.15 1.00 0.250 0.65 0.85 0.75 0.410 DCR (Ω) ±20% UHP252012BF/NF-100M 10.0 0.1V/1M 0.75 UHP252012BF/NF-150M 15.0 0.1V/1M 0.60 0.54 0.63 0.56 0.540 UHP252012BF/NF-220M 22.0 0.1V/1M 0.50 0.45 0.56 0.50 0.850 5. Material No. Description Specification a. Core Ferrite Core b. Wire Enameled Copper Wire c Glue Epoxy with magnetic powder d Terminal Ag/Ni/Sn 6. Packaging Information 6-1. Reel Dimension C B D A Size Type A(mm) B(mm) C(mm) D(mm) 160808/201210 7”x8mm 8.4±1.0 50 min. 13±0.8 178±2 201608/201609 /201610/252010 /252012 7”x8mm 8.4±1.0 50 min. 13±0.8 178±2 7"x8mm 6-2. Tape Dimension t Bo Po:4∮0.1 W:8.0∮0.1 P2:2∮0.05 Size P Ao Ko Bo(mm) Ao(mm) Ko(mm) P(mm) t(mm) 201608 /201609 /201610 2.5±0.10 2.0±0.10 1.20±0.10 4.0±0.10 0.22±0.05 252010 /252012 3.10±0.1 2.45±0.1 1.40±0.1 4.0±0.1 0.23±0.05 www.tai-tech.com.tw TAI-TECH P6 Series Size W(mm) P(mm) UHP 160808 8.00±0.10 4.00±0.10 1.75±0.10 3.50±0.05 2.00±0.05 1.50+0.10--0.00 0.70±0.10 1.96±0.10 1.05±0.10 1.05±0.10 4.00±0.10 0.23±0.05 UHP 201210 8.00±0.1 4.00±0.1 E(mm) F(mm) P2(mm) D(mm) D1(mm) Bo(mm) Ao(mm) Ko(mm) Po(mm) 1.75±0.1 3.50±0.05 2.00±0.05 1.50+0.10-0.00 1.00±0.1 2.34±0.1 1.50±0.1 1.22±0.1 4.00±0.1 t(mm) 0.22±0.05 6-3. Packaging Quantity Chip size 160808 201210 201608/201609/ 201610/252010 Chip / Reel 3000 2000 2000 8-4. Tearing Off Force F Top cover tape The force for tearing off cover tape is 10 to 130 grams in the arrow direction under the following conditions(referenced ANSI/EIA-481-D-2008 of 4.11 standard). 165° to180° Base tape Tearing Speed mm Room Temp. (℃) Room Humidity (%) Room atm (hPa) 300±10% 5~35 45~85 860~1060 www.tai-tech.com.tw TAI-TECH P7 7.Reliability and Test Condition Item Operating temperature Performance Test Condition -40~+125℃ (Including self - temperature rise) 1. -10~+40℃,50~60%RH (Product with taping) Storage temperature 2. -40~+125℃(on board) Electrical Performance Test HP4284A,CH11025,CH3302,CH1320,CH1320S Inductance Refer to standard electrical characteristics list. DCR LCR Meter. CH16502,Agilent33420A Micro-Ohm Meter. Saturation DC Current (Isat) will cause L0 Saturation Current (Isat) Approximately △L30%. to drop △L(%) Heat Rated Current (Irms) will cause the coil temperature rise △T(℃) without core loss. Heat Rated Current (Irms) Approximately △T40℃ 1.Applied the allowed DC current 2.Temperature measured by digital surface thermometer Reliability Test Preconditioning: Run through IR reflow for 3 times.( IPC/JEDEC J-STD-020E Classification Reflow Profiles) Temperature： 125±2℃(Inductor，ambient + temp rise) Applied current：rated current Duration：1000±12hrs Measured at room temperature after placing for 24±2 hrs Life Test Preconditioning: Run through IR reflow for 3times. ( IPC/JEDECJ-STD-020E Classification Reflow Profiles) Humidity：85±2﹪R.H, Load Humidity Temperature：85℃±2℃ Duration：1000hrs Min. Bead:with 100% rated current, Inductance：with 100% rated current Measured at room temperature after placing for 24±2 hrs. Preconditioning: Run through IR reflow for 3 times. ( IPC/JEDECJ-STD-020E Classification Reflow Profiles) 1. Baked at50℃ for 25hrs, measured at room temperature after placing for 4 hrs. 2. Raise temperature to 65 ± 2 ℃ 90-100%RH in 2.5hrs, and keep 3 hours, cool down to 25℃ in 2.5hrs. Moisture Resistance Appearance：No damage. Inductance：within±10% of initial value Q：Shall not exceed the specification value. RDC：within ±15% of initial value and shall not exceed the specification value 3. Raise temperature to 65 ± 2 ℃ 90-100%RH in 2.5hrs, and keep 3 hours, cool down to 25℃ in 2.5hrs,keep at 25℃ for 2 hrs then keep at -10℃ for 3 hrs 4. Keep at 25 ℃ 80-100%RH for 15min and vibrate at the frequency of 10 to 55 Hz to 10 Hz, measure at room temperature after placing for 1~2 hrs. Preconditioning: Run through IR reflow for 3 times. ( IPC/JEDECJ-STD-020E Classification Reflow Profiles) Thermal shock Condition for 1 cycle Step1：-40±2℃ 30±5min Step2：125±2℃ ≦0.5min Step3：125±2℃ 30±5minNumber of cycles： 500 Measured at room fempraturc after placing for 24±2 hrs. Preconditioning: Run through IR reflow for 3 times. ( IPC/JEDECJ-STD-020E Classification Reflow Profiles) Oscillation Frequency: 10Hz～2KHz～10Hz for 20 minutes Vibration Equipment： Vibration checker Total Amplitude: 10g Testing Time : 12 hours(20 minutes, 12 cycles each of 3 orientations)。 www.tai-tech.com.tw TAI-TECH P8 Item Performance Bending Appearance：No damage. Inductance：within±10% of initial value Q：Shall not exceed the specification value. RDC：within ±15% of initial value and shall not exceed the specification value Shock Test Condition Shall be mounted on a FR4 substrate of the following dimensions: >=0805 inch(2012mm):40x100x1.2mm =0805 inch(2012mm):1.2mm 0805inch(2012mm):1kg,