TCI-BOB-2152

Breakout Board IoT Expansion Card Product Specification 4119367 Rev 1 Contents subject to change Breakout Board IoT Expansion Card Product Specification Important Notice Due to the nature of wireless communications, transmission and reception of data can never be guaranteed. Data may be delayed, corrupted (i.e., have errors) or be totally lost. Although significant delays or losses of data are rare when wireless devices such as the Sierra Wireless modem are used in a normal manner with a well-constructed network, the Sierra Wireless modem should not be used in situations where failure to transmit or receive data could result in damage of any kind to the user or any other party, including but not limited to personal injury, death, or loss of property. Sierra Wireless accepts no responsibility for damages of any kind resulting from delays or errors in data transmitted or received using the Sierra Wireless modem, or for failure of the Sierra Wireless modem to transmit or receive such data. Safety and Hazards Do not operate the Sierra Wireless modem in areas where blasting is in progress, where explosive atmospheres may be present, near medical equipment, near life support equipment, or any equipment which may be susceptible to any form of radio interference. In such areas, the Sierra Wireless modem MUST BE POWERED OFF. The Sierra Wireless modem can transmit signals that could interfere with this equipment. Do not operate the Sierra Wireless modem in any aircraft, whether the aircraft is on the ground or in flight. In aircraft, the Sierra Wireless modem MUST BE POWERED OFF. When operating, the Sierra Wireless modem can transmit signals that could interfere with various onboard systems. Note: Some airlines may permit the use of cellular phones while the aircraft is on the ground and the door is open. Sierra Wireless modems may be used at this time. The driver or operator of any vehicle should not operate the Sierra Wireless modem while in control of a vehicle. Doing so will detract from the driver or operator's control and operation of that vehicle. In some states and provinces, operating such communications devices while in control of a vehicle is an offence. Limitation of Liability The information in this manual is subject to change without notice and does not represent a commitment on the part of Sierra Wireless. SIERRA WIRELESS AND ITS AFFILIATES SPECIFICALLY DISCLAIM LIABILITY FOR ANY AND ALL DIRECT, INDIRECT, SPECIAL, GENERAL, INCIDENTAL, CONSEQUENTIAL, PUNITIVE OR EXEMPLARY DAMAGES INCLUDING, BUT NOT LIMITED TO, LOSS OF PROFITS OR REVENUE OR ANTICIPATED PROFITS OR REVENUE ARISING OUT OF THE USE OR INABILITY TO USE ANY SIERRA WIRELESS PRODUCT, EVEN IF SIERRA WIRELESS AND/OR ITS AFFILIATES HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR THEY ARE FORESEEABLE OR FOR CLAIMS BY ANY THIRD PARTY. Notwithstanding the foregoing, in no event shall Sierra Wireless and/or its affiliates aggregate liability arising under or in connection with the Sierra Wireless product, regardless of the number of events, occurrences, or claims giving rise to liability, be in excess of the price paid by the purchaser for the Sierra Wireless product. Rev 1 Oct.16 2 4119367 Patents This document contains information which is proprietary to Sierra Wireless Inc. and is licensed pursuant to Creative Commons Attribution 4.0 International License. Document details Title: Wi-Fi IoT Expansion Card Product Specification Author: Sierra Wireless Source: http://mangoh.io/ Copyright © 2016 Sierra Wireless. Licensed under the Creative Commons Attribution 4.0 license, http://creativecommons.org/licenses/by/4.0/ Disclaimer Indicate any modifications made to the original document. Trademarks mangOH™ and the mangOH logo are trademarks of Sierra Wireless. Other trademarks are the property of their respective owners. Revision History Revision number Release date Changes 1 October 2016 Created Rev 1 Oct.16 3 4119367 1: Breakout Board IoT Expansion Card Specification 1 1.1 Overview The Sierra Wireless Breakout Board IoT Expansion Card is an open hardware reference design based on the IoT Expansion Card specification. This expansion card provides the following functionality: • Breakout board (test points) for testing IoT interfaces 1.2 Specifications The following tables describe key features and specifications of the Breakout Board IoT Expansion Card: • Table 1-1, Hardware Features, on page 4 • Table 1-2, IoT Expansion Card Specifications, on page 5 • Table 1-3, Software Interface Support, on page 5 Table 1-1: Hardware Features Feature Notes Test points • • 40 test points in four groups of 10 (38 used for IoT, 2 NC) 10-pin connectors can be added to each group CN204 CN203 CN202 IoT pin numbers (e.g from left to right: pins 33, 06, 15, 24) CN201 Figure 1-1: Breakout Board IoT Expansion Card Top View Rev 1 Oct.16 4 4119367 Breakout Board IoT Expansion Card Product Specification Table 1-2: IoT Expansion Card Specifications Parameter Value / Range Notes Power Category 1 Power consumption < 2.5 W Power Supplies (Voltage Rails) 1.8V 3.3V 5.0V Power Specifications Mechanical Specifications Height Category 1 Top height 14.00 mm Dimensions Length: 42.50 mm Width: 22.30 mm Per IoT Expansion Card specification # of slots required 1 mangOH Green Slot Restriction Any slot Hot Swappable No Environmental Specifications Ambient Operating Temperature Expansion Card— Temperature not tested. Reference design. Not tested for compliance with IoT Expansion Card Design Specification. Table 1-3: Software Interface Support Rev 1 Oct.16 Interface Supported USB Yes SDIO Yes UART Yes SPI Yes n_RESET Yes ADC Yes I2C Yes PCM Yes I2S Yes GPIO Yes n_CARD_DETECT Yes PPS Yes 5 4119367 Breakout Board IoT Expansion Card Product Specification 1.3 Schematics Schematics for the Breakout Board IoT Expansion Card and other expansion cards are available at http://mangoh.io. 1.4 Pinout Table 1-4: Pins Supported Pin Signal Supported Notes Pin Signal Supported 1 VCC_5VC Yes 20 ADC0 Yes 2 USB_D+ Yes 21 GND Yes 3 USB_D- Yes 22 I2C_SDA Yes 4 GND Yes 23 I2C_SCL Yes 5 SDIO_CLK Yes 24 GPIO_1 Yes 6 SDIO_CMD Yes 25 GPIO_2 Yes GPIO_3 Yes 7 SDIO_DAT3/CD SPI_SRDY Yes Yes 26 Yes 8 SDIO_DAT2 Yes 27 GPIO_4 Yes 9 SDIO_DAT1 Yes 28 VCC_3V3 Yes 10 SDIO_DAT0 Yes 29 VCC_3V3 Yes 11 VCC_1V8 Yes 30 GND Yes 12 UART_TXD Yes 31 n_CARD_DETECT Yes 13 UART_RXD Yes 32 n_RESET Yes PCM_DIN Yes 14 UART_CTS I2S_IN Yes PCM_DOUT Yes I2S_OUT Yes PCM_SYNC Yes I2S_WC Yes PCM_CLK Yes I2S_CLK Yes Yes 33 Yes Yes 15 UART_RTS 34 Yes Yes 16 SPI_CLK 35 Yes Yes 17 SPI_MISO 36 Yes 18 SPI_MOSI Yes 37 PPS Yes 19 SPI_SS/MRDY Yes 38 GND Yes Rev 1 Oct.16 Notes 6 4119367 Breakout Board IoT Expansion Card Product Specification 1.5 System Block IoT Connector Pin 1 Pin 2 Pin 3 Pin 4 Pin 5 CN201 Pin 6 Pin 7 Pin 8 Pin 9 Pin 10 CN202 Pin 11 Pin 12 Pin 13 Pin 14 Pin 15 CN203 Pin 16 Pin 17 Pin 18 Pin 19 Pin 20 Pin 22 CN204 Pin 21 Pin 23 Pin 24 Pin 25 Pin 26 Pin 27 Pin 28 Pin 29 Pin 31 Pin 33 Pin 34 Pin 36 Pin 30 Pin 32 Note: Colors are used to identify groups of pins. No other meaning is implied. Pin 35 Pin 37 Pin 38 Figure 1-2: Breakout Board IoT Expansion Card System Block Rev 1 Oct.16 7 4119367