Switches & Pilot Devices
Signaling Lights
Switches & Pilot Devices
ø22mm - HW Series
HW Series — 22mm IEC Style Global Pushbuttons
Key features:
• Locking lever removable contact blocks
• Finger-safe IP20 contacts
• Tamperproof construction
• All E-stops meet EN60947-5-5, and are compliant with
SEMI S2 standards
• Worldwide approvals
• Easy to assemble
• Choice of black plastic or metallic front bezels
• LED illumination
• Transformer or full voltage
• Slow make double break contacts
HW: The Best Engineered Switch in the World
IDEC’s HW switches are “The best engineered switch in the world” for a reason. Carrying the CE
mark, UL, CSA, CCC (Chinese), and TUV approvals, these switches are designed for use in almost
any part of the world.
File No. E68961
All switches also incorporate mechanically keyed safety locking levers, ensuring correct
installation and maintaining safety in high-vibration applications.
Certificate No.
Certificate No.
R50086203_HW_e-stop 2017010305987846
R50391189_HW
File No. LR21451
Electrical
Specifications
Contactors
Timers
Relays & Sockets
Complete with finger-safe contact blocks offering IP20 protection, these 7/8” (22mm) switches
include illuminated and non-illuminated pushbuttons, pilot lights, selector switches, and
emergency stop switches.
Rated Operational Characteristics
AC-15: A600 or Ue = 250V, le = 3A (NO, NC, NO-EM, NC-LB)
DC-13: P600 or Ue = 125V, le = 1.1A (NO, NC)
DC-13: Q600 or Ue = 125V, le = 0.9A (NO-EM, NC-LB)
Rated Insulation Voltage
600V
Rated Switching Over-Voltage
Less than 4kV, conforming to IEC60947-1
Rated Impulse Withstanding Voltage
4kV for contact circuit, 2.5kV for lamp circuit
Rated Thermal Current
10 Amp
Minimum Switching Capacity
5 mA at 3V AC/DC
Electrical Reliability
MTBF < 1 fault for 10 million operation cycles (3V DC, 5mA)
Lamp Ratings
LEDs: 6V/17mA max, 12V & 24V/11mA max, 120 & 240V/10mA max
Contact Operation
Slow break NC or NO
Positive Action Operation
(Emergency Stops with NC contacts)
5.5mm to 10mm travel to latch, 45N minimum force to latch
10mm maximum travel, 1,800 operations per hour maximum for a Pushlock Turn Reset
900 operations per hour maximum for a Push-Pull
Operating Force
Flush and extended pushbuttons—with 1NO or 1NC contact: 6.2±2N (momentary), 7.0±2N (maintained)
Additional contacts—1NO or 1NC: +3.2N (momentary), + 3.3N (maintained)
Wire
Number of Wires
Recommended
Tightening Torque (Nm)
Crimping Terminal
Unit
Recommended Terminal Torque
HW-U Contact Block
Solid Wire
Stranded Wire
2
1.0 to 1.3
ø0.5 to 1.6 mm (AWG14 to 22)
2
1.0 to 1.3
ø1.7 to 2.0 mm (AWG12)
1
1.2 to 1.3
0.3 to 2.0 mm2 (AWG14 to 22)
2
1.0 to 1.3
2.1 to 3.5 mm2 (AWG12)
1
1.2 to 1.3
2
1.0 to 1.3
Terminal
Screw
M3.5
Circuit Breakers
Mechanical
Terminal Blocks
Crimping Terminal
Illuminated Unit (*1)
Solid Wire
ø0.5 to 1.6 mm (AWG14 to 22)
Stranded Wire
0.3 to 2.0 mm (AWG14 to 22)
Crimping Terminal
Applicable Wire Size
Pilot Light
Solid Wire
ø0.5 to 1.6 mm (AWG14 to 22)
Stranded Wire
ø0.3 to 2.0 mm (AWG14 to 22)
2
M3.5
0.6 to 1.0 (M3.0)
1.0 to 1.3 (M3.5)
1. * refers to the lamp terminals of the illuminated push buttons and selector switches.
Applicable Wire Size
Minimum 1 x 22 AWG, max. 2 x 14 AWG or 1 x 12 AWG
Contact Resistance
Initial contact resistance of 50mΩ or less
Contact Gap
4mm (NO and NC), 2mm (NO-EM and NC-LB)
Horsepower Rating
Reference Value: 1/4 HP @ 120V (1ø non-reversing), 1HP @ 240V (3ø non-reversing)
Contact Material
Silver (gold plated contacts available - contact IDEC)
Operating Temperature
Operation: -25 to +60°C (illuminated -25 to +50°C dome -25 to +55°C)
Vibration Resistance
10 to 55Hz, 98m/sec2 (10G) conforming to IEC6068-2-6
Shock Resistance
980m/sec2 (100G) conforming to IEC6068-2-7
Mechanical Life
Momentary pushbuttons: 5,000,000 (900 operations per hour), All other switches: 500,000
634
www.IDEC.com
1904032200
Switches & Pilot Devices
Standards & Approvals
EN60947-1, EN60947-5-1, VDE0660-200, UL508, CSA C22-2 No.14
File No. LR92374
Approvals
Registration No. R9551089 (E-stops)
Registration No. R50054316 (Dual Pushbuttons)
Registration No. J9650511 (Pilot Lights)
Registration No. J9551458 (all other switches)
Certificate No.
2005010305145656
Electric Shock Protection
CSA: pushbuttons and selector switches: A600
pilot lights and illuminated pushbuttons, direct supply pilot lights and illuminated pushbuttons with integral transformer (100/110, 115, 120, 200/220, 230, 240, 380,
400/440, 480V)
UL: pushbuttons and selector switches: A600
pilot lights and illuminated pushbuttons, direct supply pilot lights and illuminated pushbuttons with integral transformer (100/110, 115, 120, 200/220, 230, 240, 380,
400/440, 480V)
TÜV: pushbuttons and selector switches: A600=P600 (NO, NC)/Q600 (NO-EM, NC-LB)
pilot lights and illuminated pushbuttons, direct supply pilot lights and illuminated pushbuttons with integral transformer (100/110, 115, 120, 200/220, 230, 240, 380,
400/440, 480V)
Degree of Protection
(conforming to IEC60529 and UL50)
Class 2 conforming to IEC60664-7
UL Type 1, 4X, 12, 13 1
IP65 (from front of the panel) IP20 (Type HW-U contact block)
Pollution Degree (conforming to IEC60947-1)
3
External Short-Circuit Protection
10A 250V fuse conforming to IEC60269-1
Contact Block
Type HW-U
Rated Insulation Voltage
600V
Rated Continuous Current
10A
Contact Ratings by Utilization Category
IEC 60947-5-1
AC-15 (A600)
DC-13 (P600)
Characteristics
Operational Voltage
AC 50/60 Hz
Operational
Current
DC
24V
48V
50V
110V
220V
440V
AC-12 Control of resistive loads & solid state
loads
10A
—
10A
10A
6A
2A
AC-15 Control of electromagnetic loads (> 72VA)
10A
—
7A
5A
3A
1A
DC-12 Control of resistive loads & solid state
loads
10A
5A
—
2.2A
1.1A
—
DC-13 Control of electromagnets
5A
2A
—
1.1A
0.6A
—
Relays & Sockets
Pushbuttons
Illuminated Pushbuttons
Selector Switches
Illuminated Selector Switches
Pushbutton Selectors
Signaling Lights
Contact Ratings
File No. E68961
Switches & Pilot Devices
Conforming to Standards
ø22mm - HW Series
For dimensions, see page 685.
Note 1. Except HW2B
Timers
LED Lamp Ratings (LSTD Type)
Model
LSTD-6k
LSTD-1k
Lamp Base
LSTD-2k
LSTD-H2k
LSTD-M4k
BA9S/13
Rated Voltage
6V AC/DC
12V AC/DC
24V AC/DC
120V AC
240V AC
Voltage Range
6V AC/DC ±10%
12V AC/DC ±10%
24V AC/DC ±10%
120V AC ±5%
240V AC ±5%
AC
A, R, W:
G, S:
17mA
8mA
11mA
11mA
10mA
10mA
DC
A, R, W:
G, S:
14mA
5.5mA
10mA
10mA
–
–
Color Code
A (amber), G (green), R (red), S (blue), W (white)
Lamp Base Color
Same as illumination color
Voltage Marking
Life (reference value)
Contactors
Current
Draw
Die stamped on the base
Approx. 50,000 hours (The luminance reduces to 50% the initial intensity when used on complete DC.)
A, R, W
A, R, W
In place of k, specify
the Lens/LED Color
Code.
Terminal Blocks
Internal Circuit
G, S
1904032200
800-262-IDEC (4332) • USA & Canada
Circuit Breakers
LED Chip LED Chip
LED Chip
Protection Diode
Protection
Protection
DiodeDiode
Zener Diode Zener Diode
Zener Diode
635
Switches & Pilot Devices
Switches & Pilot Devices
ø22mm - HW Series
Contactors
Timers
Relays & Sockets
Signaling Lights
Non-Illuminated Round Pushbuttons (Assembled)
Round Flush
Function
Momentary
Maintained
Plastic Bezel
Metal Bezel
Plastic Bezel
Metal Bezel
Operator Only
HW1B-M1-j
HW4B-M1-j
HW1B-M2-j
HW4B-M2-j
1NO
HW1B-M1F10-j
HW4B-M1F10-j
HW1B-M2F10-j
HW4B-M2F10-j
1NC
HW1B-M1F01-j
HW4B-M1F01-j
HW1B-M2F01-j
HW4B-M2F01-j
1NO-1NC
HW1B-M1F11-j
HW4B-M1F11-j
HW1B-M2F11-j
HW4B-M2F11-j
2NO
HW1B-M1F20-j
HW4B-M1F20-j
HW1B-M2F20-j
HW4B-M2F20-j
2NC
HW1B-M1F02-j
HW4B-M1F02-j
HW1B-M2F02-j
HW4B-M2F02-j
2NO-2NC
HW1B-M1F22-j
HW4B-M1F22-j
HW1B-M2F22-j
HW4B-M2F22-j
Operator Only
HW1B-A1-j
HW4B-A1-j
HW1B-A2-j
HW4B-A2-j
1NO
HW1B-A1F10-j
HW4B-A1F10-j
HW1B-A2F10-j
HW4B-A2F10-j
1NC
HW1B-A1F01-j
HW4B-A1F01-j
HW1B-A2F01-j
HW4B-A2F01-j
1NO-1NC
HW1B-A1F11-j
HW4B-A1F11-j
HW1B-A2F11-j
HW4B-A2F11-j
2NO
HW1B-A1F20-j
HW4B-A1F20-j
HW1B-A2F20-j
HW4B-A2F20-j
2NC
HW1B-A1F02-j
HW4B-A1F02-j
HW1B-A2F02-j
HW4B-A2F02-j
2NO-2NC
HW1B-A1F22-j
HW4B-A1F22-j
HW1B-A2F22-j
HW4B-A2F22-j
j Button Color Code
Color
Code
Black
B
Green
G
Red
R
Blue
S
White
W
Yellow
Y
1.
2.
3.
4.
5.
6.
7.
In place of j, specify the Button Color Code from table below.
For nameplates and accessories, see page 680 and 683.
For dimensions, see page 685.
For contact assembly part numbers, see page 685.
All assembled part numbers in catalog include standard, Finger-Safe (HW-U...) contacts.
Operator only models include operator plus button.
Additional contact configurations available (up to 6 total contacts).
Circuit Breakers
Terminal Blocks
Round Extended
Contacts
636
www.IDEC.com
1904032200
Switches & Pilot Devices
ø22mm - HW Series
H
W
1
B
-
M
1
F
10 – R
Button Colors
Bezel
1: Plastic Bezel
4: Metal Bezel
Function
Contact Arrangement
Operator
M: Momentary Action
A: Maintained Action
Terminals
1: Flush
2: Extended
20: 2NO
02: 2NC
22: 2NO-2NC
Signaling Lights
F: Finger-Safe Spring-Up
Contacts
Note: Use only for interpreting part numbers.
Do not use for developing part numbers.
10: 1NO
01: 1NC
11: 1NO-NC
B: Black
G: Green
R: Red
S: Blue
W: White
Y: Yellow
Non-Illuminated Round Pushbuttons (Replacement Parts)
Contact Blocks
+
Mounting Adaptor
Safety
Lever Lock
+
Style
Anti-Rotation
Ring
+
Operator
Anti-Rotation Ring
1NO
1NC
FingerSafe
Spring-Up
Terminal
HW-U10-F
HW-U01-F
HW-U10R-F
(early make)
HW-U01R-F
(late break)
Dummy
Block
Style
Button
=
Buttons
Part Number
Style
Part Number
Round Flush
HW9Z-RL
HW1A-B1-j
Use with notched panel cutout to prevent
unit rotation.
Round Extended
HW-DB
Operators
Contact Block Mounting Adaptor
Part Number
HW1A-B2-j
Plastic
Bezel
Style
HW-CB2C
Metal
Bezel
1. In place of j, specify the
Button Color Code from table.
HW1B-M0
Contactors
Round Flush/
Extended
Momentary
Style
Completed Unit
Timers
Contacts
+
Relays & Sockets
Contact Blocks
+
Switches & Pilot Devices
Part Number Structure
HW4B-MO
1. Used to mount contact blocks to operator.
2. IDEC strongly recommends using the safety lever
lock to prevent heavy vibration or maintenance
personnel from inadvertently unlocking contacts.
HW1B-A0
Safety Lever Lock
Style
Part Number
HW4B-AO
Color
Code
Black
B
Green
G
Red
R
Blue
S
White
W
Yellow
Y
Terminal Blocks
Maintained
j Button Color Code
HW9Z-LS
Circuit Breakers
1904032200
800-262-IDEC (4332) • USA & Canada
637
Switches & Pilot Devices
Switches & Pilot Devices
ø22mm - HW Series
Relays & Sockets
Signaling Lights
Non-Illuminated Mushroom Head Pushbuttons (Assembled)
ø29mm Mushroom Head
Function
Timers
Momentary
Contactors
Maintained
ø40mm Mushroom Head
Contacts
Plastic Bezel
Metal Bezel
Plastic Bezel
Metal Bezel
Operator Only
HW1B-M3-j
HW4B-M3-j
HW1B-M4-j
HW4B-M4-j
1NO
HW1B-M3F10-j
HW4B-M3F10-j
HW1B-M4F10-j
HW4B-M4F10-j
1NC
HW1B-M3F01-j
HW4B-M3F01-j
HW1B-M4F01-j
HW4B-M4F01-j
1NO-1NC
HW1B-M3F11-j
HW4B-M3F11-j
HW1B-M4F11-j
HW4B-M4F11-j
2NO
HW1B-M3F20-j
HW4B-M3F20-j
HW1B-M4F20-j
HW4B-M4F20-j
2NC
HW1B-M3F02-j
HW4B-M3F02-j
HW1B-M4F02-j
HW4B-M4F02-j
2NO-2NC
HW1B-M3F22-j
HW4B-M3F22-j
HW1B-M4F22-j
HW4B-M4F22-j
Operator Only
HW1B-A3-j
HW4B-A3-j
HW1B-A4-j
HW4B-A4-j
1NO
HW1B-A3F10-j
HW4B-A3F10-j
HW1B-A4F10-j
HW4B-A4F10-j
1NC
HW1B-A3F01-j
HW4B-A3F01-j
HW1B-A4F01-j
HW4B-A4F01-j
1NO-1NC
HW1B-A3F11-j
HW4B-A3F11-j
HW1B-A4F11-j
HW4B-A4F11-j
2NO
HW1B-A3F20-j
HW4B-A3F20-j
HW1B-A4F20-j
HW4B-A4F20-j
2NC
HW1B-A3F02-j
HW4B-A3F02-j
HW1B-A4F02-j
HW4B-A4F02-j
2NO-2NC
HW1B-A3F22-j
HW4B-A3F22-j
HW1B-A4F22-j
HW4B-A4F22-j
Terminal Blocks
j Button Color Code
ø60mm Mushroom Head
Function
Circuit Breakers
Momentary
638
Contacts
Plastic Bezel
Operator Only
HW1B-M5-j*
1NO
HW1B-M5F10-j*
1NC
HW1B-M5F01-j*
1NO-1NC
HW1B-M5F11-j*
2NO
HW1B-M5F20-j*
2NC
HW1B-M5F02-j*
2NO-2NC
HW1B-M5F22-j*
Color
Code
Black
B
Green
G
Red
R
Blue
S
White
W
Yellow
Y
www.IDEC.com
In place of j, specify the Button Color Code from table.
*60mm mushroom available only in red, green, black, and yellow.
For nameplates and accessories, see page 680 and 683.
For dimensions, see page 685.
For contact assembly part numbers, see page 685.
All assembled part numbers in catalog include standard spring-up
Finger-Safe (HW-U...) contacts.
7. Operator only models include operator plus button.
8. Additional contact configurations available (up to 6 total contacts).
1.
2.
3.
4.
5.
6.
1904032200
Switches & Pilot Devices
ø22mm - HW Series
Switches & Pilot Devices
Part Number Structure
H
W
1
B
-
M
3
F
10 – R
Button Colors
Bezel
1: Plastic Bezel
4: Metal Bezel
Function
(Not available for 60mm
mushroom)
10: 1NO
01: 1NC
11: 1NO-NC
Operator
M: Momentary Action
A: Maintained Action
3: ø29mm Mushroom
4: ø40mm Mushroom
5: ø60mm Mushroom
(Not available for 60mm jumbo
mushroom pushbutton.)
Note: Use only for interpreting part numbers.
Do not use for developing part numbers.
Terminals
20: 2NO
02: 2NC
22: 2NO-2NC
F: Finger-Safe Spring-Up
Contacts
Signaling Lights
B: Black
G: Green
R: Red
S: Blue
W: White
Y: Yellow
Contact Arrangement
Non-Illuminated Mushroom Head Pushbuttons (Replacement Parts)
Contact Blocks
+
Mounting
Adaptor
+
Safety Lever
Lock
Operator
+
Button
1NO
1NC
HW-U10-F
HW-U01-F
HW-U10R-F
(early make)
HW-U01R-F
(late break)
Dummy
Block
HW-DB
Style
=
Completed Unit
Buttons
Part Number
Style
HW9Z-LS
ø29mm
Mushroom Cap
Part Number
HW1A-B3-j
Anti-Rotation Ring
Appearance
Part Number
ø40mm
Mushroom Cap
HW9Z-RL
Contact Block Mounting Adaptor
Style
Part Number
HW1A-B4-j
HW1B-M5-j*
HW4B-MOL
HW4B-AOL
1. In place of j, specify the Button
Color Code from table.
j Button Color Code
Color
Code
Color
Code
Black
B
Blue
S
Green
G
White
W
R
Yellow
Y
Red
HW1B-M5 available only in black,
red, green and yellow.
–
Circuit Breakers
Maintained
Ø60mm Jumbo
Mushroom
HW1B-A0L
Metal
Bezel
Terminal Blocks
1. Used to mount contact blocks to operator.
2. IDEC strongly recommends using the
safety lever lock to prevent heavy
vibration or maintenance personnel from
inadvertently unlocking contacts.
HW1B-M0L
Momentary
ø29mm Mushroom
ø40mm Mushroom
Momentary
Plastic Bezel
Contactors
Operators
Style
HW-CB2C
Timers
FingerSafe
Spring-Up
Terminal
+
Relays & Sockets
Contacts
Anti-Rotation
Ring
Safety Lever Lock
Contact Blocks
Style
+
1. *60mm mushroom operator includes non-removable button
(available in red, black, green and yellow only).
2. For nameplates and accessories, see page 680 and 683.
3. For dimensions, see page 685.
1904032200
800-262-IDEC (4332) • USA & Canada
639
Switches & Pilot Devices
Switches & Pilot Devices
ø22mm - HW Series
Relays & Sockets
Signaling Lights
Non-Illuminated Square Pushbuttons (Assembled)
Function
Square Flush
Square Extended
Plastic Bezel
Plastic Bezel
Operator Only
HW2B-M1-j
HW2B-M2-j
1NO
HW2B-M1F10-j
HW2B-M2F10-j
1NC
HW2B-M1F01-j
HW2B-M2F01-j
1NO-1NC
HW2B-M1F11-j
HW2B-M2F11-j
2NO
HW2B-M1F20-j
HW2B-M2F20-j
2NC
HW2B-M1F02-j
HW2B-M2F02-j
2NO-2NC
HW2B-M1F22-j
HW2B-M2F22-j
Operator Only
HW2B-A1-j
HW2B-A2-j
1NO
HW2B-A1F10-j
HW2B-A2F10-j
1NC
HW2B-A1F01-j
HW2B-A2F01-j
1NO-1NC
HW2B-A1F11-j
HW2B-A2F11-j
2NO
HW2B-A1F20-j
HW2B-A2F20-j
2NC
HW2B-A1F02-j
HW2B-A2F02-j
2NO-2NC
HW2B-A1F22-j
HW2B-A2F22-j
Contacts
Timers
Momentary
Contactors
Maintained
Color
Code
Black
B
Green
G
Red
R
Blue
S
White
W
Yellow
Y
In place of j, specify the Button Color Code from table.
For nameplates and accessories, see page 680 and 683.
For dimensions, see page 685.
For contact assembly part numbers, see page 685.
Square pushbuttons available in plastic bezel only.
All assembled part numbers in catalog include finger-safe spring-up (HW-U...)
contacts.
7. Operator only model includes operator and button.
8. Additional contact configurations available (up to 6 total contacts).
1.
2.
3.
4.
5.
6.
Circuit Breakers
Terminal Blocks
j Button Color Code
640
www.IDEC.com
1904032200
Switches & Pilot Devices
ø22mm - HW Series
Switches & Pilot Devices
Part Number Structure
H
W
2
B
-
M
1
F
10 – R
Button Colors
Function
M: Momentary Action
A: Maintained Action
Contact Arrangement
Operator
10: 1NO
01: 1NC
F: Finger-Safe Spring-Up Contacts 11: 1NO-NC
1: Flush
2: Extended
Terminals
20: 2NO
02: 2NC
22: 2NO-2NC
Signaling Lights
Note: Use only for interpreting part numbers.
Do not use for developing part numbers.
B: Black
G: Green
R: Red
S: Blue
W: White
Y: Yellow
Non-Illuminated Square Pushbuttons (Replacement Parts)
Contact Blocks
Mounting
Adaptor
+
+
Safety
Lever Lock
+
Anti-Rotation
Ring
+
Operator
+
Button
=
Completed Unit
Relays & Sockets
Safety Lever Lock
Contact Blocks
Style
1NO
1NC
FingerSafe
Spring-Up
Terminal
HW-U10-F
HW-U01-F
HW-U10R-F
(early make)
HW-U01R-F
(late break)
Dummy
Block
Style
Part Number
Square Flush
HW2A-B1-j
Anti-Rotation Ring
HW-DB
Style
HW9Z-LS
Appearance
Part Number
Square Extended
HW2A-B2-j
HW9Z-RL
Contact Block Mounting Adaptor
Part Number
HW-CB2C
Use with notched panel cutout to
prevent unit rotation.
Operators
Plastic
Bezel
Momentary
Square Flush
Extended
HW2B-M0
HW2B-A0
1. In place of j, specify the Button
Color Code from table.
j Button Color Code
Color
Code
Color
Code
Black
B
Blue
S
Green
G
White
W
Red
R
Yellow
Y
Terminal Blocks
1. Used to mount contact blocks to operator.
2. IDEC strongly recommends using the safety
lever lock to prevent heavy vibration or
maintenance personnel from inadvertently
unlocking contacts.
Maintained
Style
Contactors
Style
Buttons
Part Number
Timers
Contacts
1904032200
800-262-IDEC (4332) • USA & Canada
Circuit Breakers
2. For nameplates and accessories, see
pages 680 and 683.
3. For dimensions, see page 685.
641
Switches & Pilot Devices
Switches & Pilot Devices
ø22mm - HW Series
Ø29mm Head Pushlock Turn Reset
Ø40mm Head Pushlock Turn Reset
Contacts
Plastic Bezel
Metal Bezel
Plastic Bezel
Metal Bezel
Operator Only
HW1B-V3j†
HW4B-V3j†
HW1B-V4j†
HW4B-V4j†
1NO
HW1B-V3F10-j†
HW4B-V3F10-j†
HW1B-V4F10-j†
HW4B-V4F10-j†
1NC
HW1B-V3F01-j†
HW4B-V3F01-j†
HW1B-V4F01-j†
HW4B-V4F01-j†
1NO-1NC
HW1B-V3F11-j†
HW4B-V3F11-j†
HW1B-V4F11-j†
HW4B-V4F11-j†
2NO
HW1B-V3F20-j†
HW4B-V3F20-j†
HW1B-V4F20-j†
HW4B-V4F20-j†
2NC
HW1B-V3F02-j†
HW4B-V3F02-j†
HW1B-V4F02-j†
HW4B-V4F02-j†
Timers
Relays & Sockets
Signaling Lights
Non-Illuminated E-Stop Pushbuttons (Assembled)
Plastic Bezel
Metal Bezel
Plastic Bezel
Metal Bezel
Operator Only
HW1B-V4R-EMO-2*
HW4B-V4R-EMO-2*
HW1B-X4R*
HW4B-X4R*
1NO
HW1B-V4F10-R-EMO-2*
HW4B-V4F10-R-EMO-2*
HW1B-X4F10-R*
HW4B-X4F10-R*
1NC
HW1B-V4F01-R-EMO-2*
HW4B-V4F01-R-EMO-2*
HW1B-X4F01-R*
HW4B-X4F01-R*
1NO-1NC
HW1B-V4F11-R-EMO-2*
HW4B-V4F11-R-EMO-2*
HW1B-X4F11-R*
HW4B-X4F11-R*
2NO
HW1B-V4F20-R-EMO-2*
HW4B-V4F20-R-EMO-2*
HW1B-X4F20-R*
HW4B-X4F20-R*
2NC
HW1B-V4F02-R-EMO-2*
HW4B-V4F02-R-EMO-2*
HW1B-X4F02-R*
HW4B-X4F02-R*
ø60mm Head Pushlock Turn Reset
Circuit Breakers
Ø40mm Head Pushlock Key Reset
Contacts
Terminal Blocks
Contactors
Ø40mm Head EMO Pushlock Turn Reset
Contacts
Plastic Bezel
Operator Only
HW1B-V5R*
1NO
HW1B-V5F10-R*
1NC
HW1B-V5F01-R*
1NO-1NC
HW1B-V5F11-R*
2NO
HW1B-V5F20-R*
2NC
HW1B-V5F02-R*
642
1. * Available in Red only.
2. † Available in red or yellow. Insert color code in place of j (R: Red, Y: Yellow).
2. For accessories, see page 683.
3. For dimensions, see page 685.
5. For nameplates and shrouds, see page 685.
4. For contact assembly part numbers, see page 685.
7. All HW series E-stops comply with EN60947-5-5, the IEC “E-Stop Addendum to the Low
Voltage Directive,” this includes “tamper proof” operation whereby a change of contact state
is not possible by “teasing” or “floating” the operator.
8. All assembled part numbers in catalog include standard finger-safe spring-up (HW-U...)
contacts.
9. Operator only models include operator and button.
10. Additional contact configurations available (up to 6 total contacts).
www.IDEC.com
1904032200
Switches & Pilot Devices
ø22mm - HW Series
H
W
1
B
–
V
3
F
10 – R – EMO-2
Engraved Button*
Bezel
EMO-2: EMO switch
1: Plastic Bezel
4: Metal Bezel
Function
(not available for 60mm
V: Pushlock Turn Reset
X: Pushlock Key Reset
jumbo mushroom)
Operator
3: ø29mm Head
4: ø40mm Head
5: ø60mm Head
Button Colors
Contact Arrangement
Terminals
10: 1NO
01: 1NC
11: 1NO-NC
F: Finger-Safe
Spring-Up
R: Red
Y: Yellow
20: 2NO
02: 2NC
22: 2NO-2NC
Note: some switches only
available in red.
Signaling Lights
Note: Use only for interpreting part numbers.
Do not use for developing part numbers.
*Option available for red
EMO E-Stop only
Non-Illuminated E-Stop Pushbuttons (Replacement Parts)
Contact Blocks
+
Mounting Adaptor
+
+
Anti-Rotation
Ring
+
1NO
1NC
FingerSafe
Spring-Up
Terminal
HW-U10-F
HW-U01-F
HW-U10R-F
(early make)
HW-U01R-F
(late break)
Dummy
Block
HW-DB
Style
Part Number
Appearance
Part Number
HW9Z-LS
HW9Z-RL
Use with notched panel cutout to prevent unit
rotation.
Operators
Style
Plastic
ø29mm Head Pushlock Turn Reset
Part Number
HW-CB2C
Metal
red
HW1B-V3R
HW4B-V3R
yellow
HW1B-V3Y
HW4B-V3Y
red
HW1B-V4R
HW4B-V4R
yellow
HW1B-V4Y
HW4B-V4Y
Contactors
ø40mm Head Pushlock Turn Reset
ø40mm Head EMO Pushlock Turn Reset*
HW1B-V4R-EMO-2
HW4B-V4R-EMO-2
HW1B-X4R
HW4B-X4R
HW1B-V5R
–
Terminal Blocks
1. Used to mount contact blocks to operator.
2. IDEC strongly recommends using the
safety lever lock to prevent heavy
vibration or maintenance personnel from
inadvertently unlocking contacts.
Completed Unit
Anti-Rotation Ring
Contact Block Mounting Adaptor
Style
=
Timers
Contacts
Operator
Relays & Sockets
Safety Lever Lock
Contact Blocks
Style
Safety Lever
Lock
Switches & Pilot Devices
Part Number Structure
ø40mm Head Pushlock Key Reset*
ø60mm Head Pushlock Turn Reset*
1904032200
800-262-IDEC (4332) • USA & Canada
Circuit Breakers
1. *Available in red only.
2. All E-Stop buttons are not removable
from the operator.
Note: Determine mounting centers to
ensure proper spacing.
643
Switches & Pilot Devices
Switches & Pilot Devices
ø22mm - HW Series
Timers
Relays & Sockets
Signaling Lights
Push Pull & Unibody E-Stop Pushbuttons (Assembled)
ø40mm Unibody Pushlock Turn Reset*
ø40mm Head Push–Pull
Contacts
Plastic Bezel
Metal Bezel
Contacts
Plastic Bezel
HW1E-BV4F11-R
Operator Only (Red)
HW1B-Y2R
HW4B-Y2R
1NO-1NC
Operator Only (Yellow)
HW1B-Y2Y
HW4B-Y2Y
2NC
HW1E-BV4F02-R
1NO
HW1B-Y2F10-j†
HW4B-Y2F10-j†
1NC
HW1B-Y2F01-j†
HW4B-Y2F01-j†
1NO-2NC*
HW1E-BV412R-TK2093-1
1NO-1NC
HW1B-Y2F11-j†
HW4B-Y2F11-j†
2NC
HW1B-Y2F02-j†
HW4B-Y2F02-j†
2NO
HW1B-Y2F20-j†
HW4B-Y2F20-j†
* NO contact is used as a monitoring contact
Circuit Breakers
Terminal Blocks
Contactors
l Full Voltage LED
Code
Terminal Numbering
(Unibody only)
Voltage
Code
Models
Terminal Number
Unibody Illuminated E-Stops*
6VAC/DC
6V
1NO-1NC
NO = 13/14, NC = 11/12
Contacts
LED
12VAC/DC
12V
2NC
NC = 11/12, NC = 21/22
1NO-1NC
HW1E-LV4F11QD-R-l
24VAC/DC
24V
120V AC
120V
HW1E-L
HW1E-T
LED + = X2, LED - = X1
240V AC
240V
2NC
HW1E-LV4F02QD-R-l
2NC (with push-on
illumination)
HW1E-TV4F02QD-R-l
1NO-1NC (with push-on
illumination )
HW1E-TV4F11QD-R-l
1. * Available in Red only.
2. † Available in red or yellow. Insert color code in place of j (R: Red, Y: Yellow).
3. In place of l, specify Full Voltage LED Code.
4. With single unit construction, the positive action contacts are integrated in the body of the switch. This provides an extra degree of safety and reliability for critical emergency stop functions.
5. In the illuminated version, the light is independent of the switch action (except push-on LED model).
6. For accessories, see page 683.
7. For dimensions, see page 685.
8. For nameplates and shrouds, see page 683.
9. For contact assembly part numbers, see page 683.
10. All HW Series E-Stop operators include non-removable color caps.
11. All HW series E-Stops comply with EN60947-5-5, the IEC “E-Stop Addendum to the Low Voltage Directive,” this includes “tamper proof” operation whereby a change of contact state is not
possible by “teasing” or “floating” the operator.
12. All HW series E-Stop switches comply with SEMI S2 standards.
13. All assembled part numbers in catalog include standard finger-safe spring-up (HW-U...) contacts.
14. Additional contact configurations available (up to 6 total contacts).
644
www.IDEC.com
1904032200
Switches & Pilot Devices
ø22mm - HW Series
H
W
1
E
–
LV4
F
11 – Q D – R – 24V
Bezel
1: Plastic Bezel
4: Metal Bezel*
(*not available for
HW1E unibody)
Full Voltage Code
Button Colors (Illuminated E-Stop)
Function
R: Red
Y: Yellow*
Lamp Code
B: Push Pull
E: Unibody Pushlock Turn Reset
D: LED
(*only available in
40mm Push Pull
E-Stop)
Illumination
Illumination Circuit
6V AC/DC
12V AC/DC
24V AC/DC
120VC AC
240V AC
Signaling Lights
Contacts
BV4: Non-illuminated (unibody style)
11: 1NO-1NC
LV4: Illuminated (unibody style)
TV4: Illuminated Push On (unibody style) 02: 2NC
10: 1NO
Y2: Non-illuminated Push Pull E-Stop
20: 2NO
6V:
12V:
24V:
120V:
240V:
Switches & Pilot Devices
Part Number Structure
blank: 40mm Push Pull & Non-illuminated Unibody E-Stop
Q: Illuminated Unibody E-Stop
Note: Use only for interpreting part numbers.
Do not use for developing part numbers.
Illuminated & Non-Illuminated E-Stop Pushbuttons (Replacement Parts)
Mounting Adaptor
+
+
Operator
1NO
1NC
FingerSafe
Spring-Up
Terminal
HW-U10-F
HW-U01-F
HW-U10R-F
(early make)
HW-U01R-F
(late break)
Style
Part Number
=
Completed Unit
Anti-Rotation Ring
Appearance
Part Number
Timers
Contacts
Dummy
Block
Anti-Rotation
Ring
Contact Block Mounting Adaptor
Contact Blocks
Style
+
Relays & Sockets
Safety Lever
Lock
HW9Z-RL
HW-CB2C
1. There are no replacement parts for the HW1E unibody E-Stop.
2. For illuminated unibody E-Stop, see page 685 for replacement lens.
Safety Lever Lock
Style
Operators
Style
Part Number
ø40mm Head
Push-Pull
Part Number
HW9Z-LS
Plastic
HW1B-Y2R
Metal
HW4B-Y2R
Plastic
HW1B-Y2Y
HW4B-Y2Y
Terminal Blocks
Metal
Contactors
1. Used to mount contact blocks to operator.
2. IDEC strongly recommends using the
safety lever lock to prevent heavy
vibration or maintenance personnel from
inadvertently unlocking contacts.
HW-DB
Use with notched panel cutout to
prevent unit rotation.
red
+
yellow
Contact Blocks
All E- Stop Buttons are not removable from the
operator.
Circuit Breakers
1904032200
800-262-IDEC (4332) • USA & Canada
645
Switches & Pilot Devices
Switches & Pilot Devices
ø22mm - HW Series
Relays & Sockets
Signaling Lights
E-Stop Stations
29mm Pushlock Turn Reset
40mm Pushlock Turn Reset
Plastic Bezel
Metal Bezel
Plastic Bezel
Metal Bezel
1NO-1NC
FB1W-HW1B-V311R
FB1W-HW4B-V311R
FB1W-HW1B-V411R
FB1W-HW4B-V411R
2NC
FB1W-HW1B-V302R
FB1W-HW4B-V302R
FB1W-HW1B-V402R
FB1W-HW4B-V402R
Contacts
Plastic Bezel
Metal Bezel
Plastic Bezel
Metal Bezel
1NO-1NC
FB1W-HW1B-Y211R
FB1W-HW4B-Y211R
FB1W-HW1B-X411R
FB1W-HW4B-X411R
2NC
FB1W-HW1B-Y202R
FB1W-HW4B-Y202R
FB1W-HW1B-X402R
FB1W-HW4B-X402R
Timers
Contacts
Terminal Blocks
Contactors
40mm Push-Pull Reset
40mm Pushlock Key Reset
40mm EMO Pushlock Turn Reset
Contacts
Plastic Bezel
Metal Bezel
1NO-1NC
FB1W-HW1B-V411R-EMO-2
FB1W-HW4B-V411R-EMO-2
2NC
FB1W-HW1B-V402R-EMO-2
FB1W-HW4B-V402R-EMO-2
Circuit Breakers
1. Maximum of two contact blocks.
2. Box is supplied with yellow top and black bottom only.
646
www.IDEC.com
1904032200
Switches & Pilot Devices
ø22mm - HW Series
Switches & Pilot Devices
Jumbo Dome Pilot Lights
Actual Size
Operator Only
HW1P-5Q0
Full Voltage
24V AC/DC
HW1P-5Q4-k
Signaling Lights
Jumbo Dome
Plastic Bezel
LED
1. In place of k, specify the Lens/LED Color Code.
2. Spring-Up terminals with 24V LED.
3. For nameplates and accessories, see page 680 and 683.
4. For dimensions, see page 685.
Relays & Sockets
k Lens/LED Color Code
Code
Amber
A
Green
G
Red
R
Blue
S
White
W
Yellow
Y
Timers
Color
Jumbo Dome Replacement Parts
Item
Appearance
Description
Part Number
Lens
HW1A-P5k
Polycarbonate Lens
Contactors
LED Diffusing
Lens
HW9Z-PP5C
LED Lamps
Jumbo Dome
LED Lamp
LSTDB-2k
1. In place of k, specify the Lens/LED Color Code.
2 . Use white LED for yellow lens.
Terminal Blocks
Lamp Ratings
LED
Part
Number
Operating
Voltage
Rated
Current
LSTDB-2
24V AC/DC ±10% 15mA
Power
Consumption
0.36W
Circuit Breakers
1904032200
800-262-IDEC (4332) • USA & Canada
647
Switches & Pilot Devices
Switches & Pilot Devices
ø22mm - HW Series
Relays & Sockets
Signaling Lights
Pilot Lights (Assembled)
Round Flush
Dome
Plastic Bezel
Metal Bezel
Plastic Bezel
Metal Bezel
Operator Only
HW1P-1FQ0-k
HW4P-1FQ0-k
HW1P-2FQ0-k
HW4P-2FQ0-k
Full Voltage
HW1P-1FQD-k-l
HW4P-1FQD-k-l
HW1P-2FQD-k-l
HW4P-2FQD-k-l
120V AC
HW1P-1FH2D-k
HW4P-1FH2D-k
HW1P-2FH2D-k
HW4P-2FH2D-k
240V AC
HW1P-1FM4D-k
HW4P-1FM4D-k
HW1P-2FM4D-k
HW4P-2FM4D-k
480V AC
HW1P-1FT8D-k
HW4P-1FT8D-k
HW1P-2FT8D-k
HW4P-2FT8D-k
110V DC
HW1P-1D2D-k
–
HW1P-2D2D-k
–
Transformer
Timers
DC-DC Converter*
Square Flush
Contactors
Plastic Bezel
Operator Only
HW2P-1FQ0-k
Full Voltage
HW2P-1FQD-k-l
Transformer
DC-DC Converter*
120V AC
HW2P-1FH2D-k
240V AC
HW2P-1FM4D-k
480V AC
HW2P-1FT8D-k
110V DC
HW2P-1D2D-k
Circuit Breakers
Terminal Blocks
* DC-DC converter voltage input from 90-140V DC.
k Lens/LED Color Code
l LED Full Voltage Code
Color
Code
Voltage
Code
Amber
A
6VAC/DC
6V
Green
G
12VAC/DC
12V
Red
R
24VAC/DC
24V
Blue
S
120V AC
120V
White
W
240V AC
240V
Yellow
Y
648
1. In place of k, specify the Lens/LED Color Code from table below.
2. In place of lspecify the Full Voltage Code from table below.
3. For nameplates and accessories, see page 680 and 683.
4. For dimensions, see page 685.
5. Pilot lights do not come with anti-rotation ring.
6. Operator models come with operator and lens.
7. Yellow pilot light comes with white LED.
www.IDEC.com
1904032200
Switches & Pilot Devices
ø22mm - HW Series
Switches & Pilot Devices
Part Number Structure
H
W
1
P
–
2
F
Q
D – R – 12V
LED Voltage
Bezel
1: Round Plastic
2: Square Plastic
4: Round Metal
Operator
1: Flush
2: Dome
Illumination Circuit
Lens/LED Colors
Transformer*
A: Amber
G: Green
R: Red
S: Blue
W: White
Y: Yellow
Lamp Type Code
D: LED
Signaling Lights
Q: Full Voltage
H2: 120V AC Transformer
M4: 240V AC Transformer
T8: 480V AC Transformer
D2: DC-DC Converter
Note: Use only for interpreting part numbers.
Do not use for developing part numbers.
(full voltage units only)
6V: 6V AC/DC
12V: 12V AC/DC
24V: 24V AC/DC
120V: 120V AC
240V: 240V AC
Pilot Lights (Replacement Parts)
+
LED
+
Operator
+
Lens
=
Completed Unit
Relays & Sockets
(not applicable for full voltage units)
Transformer Units
Operators
Style
Voltage
Part Number
LED
120V AC
HW-FH20
240V AC
HW-FM40
480V AC
HW-FT80
(6V secondary
voltage)
Round Flush
HW-RD0*
Dome
Square Flush
LED Lamps
Part Number
6V AC/DC
LSTD-6k
12V AC/DC
LSTD-1k
24V AC/DC
LSTD-2k
120V AC
LSTD-H2k
240V AC
LSTD-M4k
HW4P-1FQ0
Finger-Safe
HW1P-10
HW4P-10
Used for DC-DC
convertor only
HW1P-100
-
Full Voltage
Finger-Safe
HW1P-2FQ0
HW4P-2FQ0
Transformer
Finger-Safe
HW1P-20
HW4P-20
Full Voltage
Finger-Safe
HW2P-1FQ0
–
Finger-Safe
HW2P-10
–
Used for DC-DC
convertor only
HW2P-100
–
Transformer
1. Transformer type requires separate transformer & LED. Must select correct transformer bases. Use 6V LEDs.
2. Full voltage type only requires LED.
Lenses
Style
l Lens Color Code
Part Number
Round/
Flush
HW1A-P1-l
k LED Color Code
Color
Code
Color
Code
Amber
A
Blue
S
Green
G
White
W
Red
R
For yellow lens use white LED.
Dome
HW1A-P2-l
Color
Code
Amber
A
Green
G
Red
R
Blue
S
White
W
Yellow
Terminal Blocks
1. In place of k, specify the LED Color Code.
2. The LED contains a current-limiting resistor
and reverse polarity protection diodes.
Metal Bezel
HW1P-1FQ0
Contactors
LED
Voltage
Plastic Bezel
Finger-Safe
Transformer
1. *DC-DC convertor can only be used with HW1P-100
and HW2P-100 operators
2. † DC-DC converter voltage input from 90-140V DC.
Style
Type
Full Voltage
Timers
110V DC
†
Style
Y
For yellow lens use white LED.
HW2A-P1-l
Circuit Breakers
Square/
Flush
In place of l, specify the Lens Color Code.
1904032200
800-262-IDEC (4332) • USA & Canada
649
Switches & Pilot Devices
Illuminated Round Pushbuttons (Assembled)
Illuminated Full Voltage Pushbuttons
Flush
Plastic Bezel
Extended
Extended w/ Full Shroud
Metal Bezel
Plastic Bezel
Metal Bezel
Plastic Bezel
Metal Bezel
Momentary
Contacts
Operator Only
1NO
1NC
1NO-1NC
2NO
HW1L-M1-k
HW1L-M1F10QD-k-l
HW1L-M1F01QD-k-l
HW1L-M1F11QD-k-l
HW1L-M1F20QD-k-l
HW4L-M1-k
HW4L-M1F10QD-k-l
HW4L-M1F01QD-k-l
HW4L-M1F11QD-k-l
HW4L-M1F20QD-k-l
HW1L-M2-k
HW1L-M2F10QD-k-l
HW1L-M2F01QD-k-l
HW1L-M2F11QD-k-l
HW1L-M2F20QD-k-l
HW4L-M2-k
HW4L-M2F10QD-k-l
HW4L-M2F01QD-k-l
HW4L-M2F11QD-k-l
HW4L-M2F20QD-k-l
HW1L-MF2-k
HW1L-MF2F10QD-k-l
HW1L-MF2F01QD-k-l
HW1L-MF2F11QD-k-l
HW1L-MF2F20QD-k-l
HW4L-MF2-k
HW4L-MF2F10QD-k-l
HW4L-MF2F01QD-k-l
HW4L-MF2F11QD-k-l
HW4L-MF2F20QD-k-l
Maintained
Timers
Relays & Sockets
Signaling Lights
Switches & Pilot Devices
ø22mm - HW Series
Operator Only
1NO
1NC
1NO-1NC
2NO
HW1L-A1-k
HW1L-A1F10QD-k-l
HW1L-A1F01QD-k-l
HW1L-A1F11QD-k-l
HW1L-A1F20QD-k-l
HW4L-A1-k
HW4L-A1F10QD-k-l
HW4L-A1F01QD-k-l
HW4L-A1F11QD-k-l
HW4L-A1F20QD-k-l
HW1L-A2-k
HW1L-A2F10QD-k-l
HW1L-A2F01QD-k-l
HW1L-A2F11QD-k-l
HW1L-A2F20QD-k-l
HW4L-A2-k
HW4L-A2F10QD-k-l
HW4L-A2F01QD-k-l
HW4L-A2F11QD-k-l
HW4L-A2F20QD-k-l
HW1L-AF2-k
HW1L-AF2F10QD-k-l
HW1L-AF2F01QD-k-l
HW1L-AF2F11QD-k-l
HW1L-AF2F20QD-k-l
HW4L-AF2-k
HW4L-AF2F10QD-k-l
HW4L-AF2F01QD-k-l
HW4L-AF2F11QD-k-l
HW4L-AF2F20QD-k-l
Circuit Breakers
Flush
Plastic Bezel
Extended
Metal Bezel
Plastic Bezel
Extended w/ Full Shroud
Metal Bezel
Plastic Bezel
Metal Bezel
Momentary
Contacts
Operator Only
1NO-1NC
2NO
HW1L-M1-k
HW1L-M1F11-lD-k
HW1L-M1F20-lD-k
HW4L-M1-k
HW4L-M1F11-lD-k
HW4L-M1F20-lD-k
HW1L-M2-k
HW1L-M2F11-lD-k
HW1L-M2F20-lD-k
HW4L-M2-k
HW4L-M2F11-lD-k
HW4L-M2F20-lD-k
HW1L-MF2-k
HW1L-MF2F11-lD-k
HW1L-MF2F20-lD-k
HW4L-MF2-k
HW4L-MF2F11-lD-k
HW4L-MF2F20-lD-k
Maintained
Terminal Blocks
Contactors
Illuminated Transformer Pushbuttons
Operator Only
1NO-1NC
2NO
HW1L-A1-k
HW1L-A1F11-lD-k
HW1L-A1F20-lD-k
HW4L-A1-k
HW4L-A1F11-lD-k
HW4L-A1F20-lD-k
HW1L-A2-k
HW1L-A2F11-lD-k
HW1L-A2F20-lD-k
HW4L-A2-k
HW4L-A2F11-lD-k
HW4L-A2F20-lD-k
HW1L-AF2-k
HW1L-AF2F11-lD-k
HW1L-AF2F20-lD-k
HW4L-AF2-k
HW4L-AF2F11-lD-k
HW4L-AF2F20-lD-k
1. In place of k, specify Lens/LED Color Code from
table.
2. In place of lspecify Voltage Code from table.
3. Light independent of switch position.
4. For replacement part numbers, see page 651.
5. For nameplates and accessories, see page 680.
and 683.
6. For dimensions, see page 685.
7. For contact assembly part numbers, see page 685.
8. Full voltage and transformer models use the same
operator.
9. Additional contact configurations available (up to 6
total contacts).
10. Yellow pushbutton comes with white LED.
650
k Lens/LED Color Code
Color
Code
Amber
A
Green
G
Red
R
Blue
S
White
W
Yellow
Y
l Voltage Code
Full Voltage
Models
Yellow LED not available. Use
white LED for yellow lens.
Transformer
Models
Voltage
Code
Voltage
Code
6V AC/DC
6V
120V AC
H2
12V AC/DC
12V
240V AC
M4
24V AC/DC
24V
480V AC
T8
120V AC
120V
240V AC
240V
www.IDEC.com
1904032200
Switches & Pilot Devices
Bezel
1: Plastic
4: Metal
W
1
L
Switches & Pilot Devices
H
ø22mm - HW Series
Part Number Structure
– M 1F 10 Q D – G – 12V
LED Lamp Voltage
Function
Operator
M: Momentary
A: Maintained
(full voltage units only)
6V: 6V AC/DC
12V: 12V AC/DC
24V: 24V AC/DC
120V: 120VC AC
240V: 240V AC
Lens Color
A: Amber S: Blue
G: Green W: White
R: Red
Y: Yellow
Contact Arrangement
1F: Flush
2F: Extended
F2F: Extended
w/ shroud
10:
01:
11:
20:
1NO
1NC
1NO-1NC
2NO
Signaling Lights
Note: Use only for interpreting part numbers.
Do not use for developing part numbers.
Illumination Circuit
Q: Full Voltage
H2: Transformer 120V AC
M4: Transformer 240V AC
T8: Transformer 480V AC
Illuminated Round Pushbuttons (Replacement Parts)
Transformer*
+
Contact
Blocks
+
Lead
Holder
+
Mounting
Adaptor
+
Safety
Lever Lock
+
Lamp
+
Anti-Rotation
Ring
+
Operator
+
Lens
Completed
Unit
=
Relays & Sockets
*Transformer not needed with full voltage models.
Lamp Circuit Components
Contact Blocks
Description
Lead Holder
For use with HW-CBL on all
illuminated pushbutton units.
One required for each deck
(pair) of contacts.
HW-LH3
For use with
odd number of
contacts.
HW-DA1FBN
Dummy Block with
Full Voltage Adaptor
Full Voltage Adaptor
DC-DC Converter
Finger-Safe
Part Number
Finger-Safe
TW-DA1FB
120VAC
240VAC
480VAC
Finger-Safe
110VDC
1NC
Finger-Safe
Spring-Up
Terminal
HW-U10-F
HW-U10R-F
(early make)
HW-U01-F
HW-U01R-F
(late break)
1. All assembled part numbers in catalog include standard finger-safe spring-up (HW-U...)
contacts.
.
Style
Part Number
1. Used to mount contact blocks to operator
(first pair only).
2. IDEC strongly recommends using the safety
lever lock to prevent heavy vibration or
maintenance personnel from inadvertently
unlocking contacts.
TW-F126B
TW-F246B
TW-F486B
HW-L16D
Anti-Rotation Ring
Part
Number
Appearance
Momentary
HW1L-M0
HW4L-M0
Maintained
HW1L-A0
HW4L-A0
Momentary
HW1L-MF0
HW4L-MF0
Maintained
HW1L-AF0
HW4L-AF0
Style
Part Number
HW9Z-LS
Lenses
Style
Round Flush
Part Number
HW1A-L1-k
Round Extended
HW1A-L2-k
Use with notched panel cutout to prevent
unit rotation.
LED Lamps
Style
LED
Voltage
Part Number
6V AC/DC
LSTD-6k
12V AC/DC
LSTD-1k
24V AC/DC
LSTD-2k
120V AC
LSTD-H2k
240V AC
LSTD-M4k
1. In place of k, specify the LED Color Code.
2. The LED contains a current-limiting resistor
and reverse polarity protection diodes.
3. Yellow LED not available, use white LED
when using yellow lens.
In place of k, specify the Lens
Color Code from previous page.
800-262-IDEC (4332) • USA & Canada
651
Circuit Breakers
Metal
Bezel
Safety Lever Lock
HW9Z-RL
Terminal Blocks
Plastic
Bezel
Style
1904032200
1NO
HW-CBL
Operators
Extended with
Full Shroud
Contacts
Contact Block Mounting Adaptor
1. *With spring-up terminals - to use spring-up terminal type, must use
transformer type operator designed for spring-up transformer.
2. ** DC-DC converter voltage input from 90-140V DC.
Round Flush/
Extended
Style
Contactors
Transformer Unit
(6V secondary
voltage)
For use with
even number of
contacts.
Terminals
Timers
Style
Switches & Pilot Devices
Switches & Pilot Devices
ø22mm - HW Series
Relays & Sockets
Signaling Lights
Illuminated Mushroom & Square Pushbuttons (Assembled)
Full Voltage
Timers
Momentary
Transformer
Contactors
Momentary
Maintained
Plastic Bezel
Metal Bezel
Plastic Bezel
Operator Only†
HW1L-M4-k
HW4L-M4-k
HW2L-M1-k
1NO
HW1L-M4F10QD-k-l
HW4L-M4F10QD-k-l
HW2L-M1F10QD-k-l
1NC
HW1L-M4F01QD-k-l
HW4L-M4F01QD-k-l
HW2L-M1F01QD-k-l
1NO-1NC
HW1L-M4F11QD-k-l
HW4L-M4F11QD-k-l
HW2L-M1F11QD-k-l
2NO
HW1L-M4F20QD-k-l
HW4L-M4F20QD-k-l
HW2L-M1F20QD-k-l
Operator Only
HW1L-A4-k
HW4L-A4-k
HW2L-A1-k
1NO
HW1L-A4F10QD-k-l
HW4L-A4F10QD-k-l
HW2L-A1F10QD-k-l
1NC
HW1L-A4F01QD-k-l
HW4L-A4F01QD-k-l
HW2L-A1F01QD-k-l
1NO-1NC
HW1L-A4F11QD-k-l
HW4L-A4F11QD-k-l
HW2L-A1F11QD-k-l
2NO
HW1L-A4F20QD-k-l
HW4L-A4F20QD-k-l
HW2L-A1F20QD-k-l
1NO-1NC
HW1L-M4F11lD-k
HW4L-M4F11lD-k
HW2L-M1F11lD-k
2NO
HW1L-M4F20lD-k
HW4L-M4F20lD-k
HW2L-M1F20lD-k
1NO-1NC
HW1L-A4F11lD-k
HW4L-A4F11lD-k
HW2L-A1F11lD-k
2NO
HW1L-A4F20lD-k
HW4L-A4F20lD-k
HW2L-A1F20lD-k
1. † Full voltage and transformer units use the same
operator.
Terminal Blocks
2. In place of k, specify the Lens/LED Color Code
from table.
Circuit Breakers
3. In place of lspecify the Voltage Code from
table.
4. Light independent of switch position
5. For nameplates and accessories, see page 680.
and 683.
6. For dimensions, see page 685.
7. For contact assembly part numbers, see page
685.
8. Additional contact configurations available (up to
6 total contacts).
9. Yellow pushbutton comes with white LED.
652
Square Flush
Contacts
†
Maintained
40mm Mushroom Head
k Lens/LED Color Code
Color
Code
Amber
A
Green
G
Red
R
Blue
S
White
W
Yellow
Y*
l Voltage Code
1. *40mm mushroom lenses
not available in yellow.
2. Yellow LED not available.
Use white LED for yellow
lens.
www.IDEC.com
Full Voltage
Models
Transformer
Models
Voltage
Code
Voltage
Code
6V AC/DC
6V
120V AC
H2
12V AC/DC
12V
240V AC
M4
24V AC/DC
24V
480V AC
T8
120V AC
120V
240V AC
240V
1904032200
Switches & Pilot Devices
W
1
Switches & Pilot Devices
H
ø22mm - HW Series
Part Number Structure
– M
1
F 10 Q D – G – 12V
L
Voltage
Bezel
1: Round Plastic
2: Square Plastic
4: Round Metal
Function
M: Momentary
A: Maintained
Lens Color
Operator
1: Square Flush
4: Mushroom
A: Amber S: Blue
G: Green W: White
R: Red
Y: Yellow
Contact Arrangement
Note: Use only for interpreting part numbers.
Do not use for developing part numbers.
1NO
1NC
1NO-1NC
2NO
Illumination Circuit
Q: Full Voltage
H2: Transformer 120V AC
M4: Transformer 240V AC
T8: Transformer 480V AC
Signaling Lights
10:
01:
11:
20:
(full voltage units only)
6V: 6V AC/DC
12V: 12V AC/DC
24V: 24V AC/DC
120V: 120VC AC
240V: 240V AC
Illuminated Mushroom & Square Pushbuttons (Replacement Parts)
Transformer*
+
Contact
Blocks
+
Lead
Holder
+
Adaptor†
+
Safety
Lever Lock
+
LED
+
Anti-Rotation
Ring
+
Operator
+
Lens
=
Completed
Unit
Relays & Sockets
*Transformer not needed with full voltage models.
Lamp Circuit Components
Contact Blocks
Description
Lead Holder
For use with HW-CBL on all
illuminated pushbutton units.
One required for each deck
(pair) of contacts.
HW-LH3
For use with
odd number of
contacts.
Finger-Safe
HW-DA1FBN
For use with
even number of
contacts.
Finger-Safe
TW-DA1FB
Dummy Block with
Full Voltage Adaptor
Full Voltage Adaptor
DC-DC Converter
Part Number
120VAC
240VAC
480VAC
Finger-Safe
110VDC
1NC
Finger-Safe
Spring-Up
Terminal
HW-U10-F
HW-U10R-F
(early make)
HW-U01-F
HW-U01R-F
(late break)
1. All assembled part numbers in catalog include standard finger-safe spring-up
contacts (HW-U...).
.
Style
Part Number
1. Used to mount contact blocks to
operator (first pair only).
2. IDEC strongly recommends using the
safety lever lock to prevent heavy
vibration or maintenance personnel
from inadvertently unlocking contacts.
TW-F126B
TW-F246B
TW-F486B
HW-L16D
Safety Lever Lock
Anti-Rotation Ring
Appearance
Part Number
Part Number
Lenses
Momentary
HW1L-M0L
HW4L-M0L
Maintained
HW1L-A0L
HW4L-A0L
Momentary
HW2L-M0
Maintained
HW2L-A0
–
Style
Part Number
ø40mm
Mushroom
Lens
ALW4BLU-k*
Square
Flush
HW2A-L1-k
Use with notched panel cutout
to prevent unit rotation.
LED Lamps
Style
LED
Voltage
Part Number
6V AC/DC
LSTD-6k
12V AC/DC
LSTD-1k
24V AC/DC
LSTD-2k
120V AC
LSTD-H2k
240V AC
LSTD-M4k
1. In place of k, specify the LED Color Code.
2. The LED contains a current-limiting resistor
and reverse polarity protection diodes.
3. Yellow LED not available, use white LED
when using yellow lens.
Circuit Breakers
Metal
Bezel
HW9Z-RL
Terminal Blocks
Style
HW9Z-LS
Plastic
Bezel
Style
1904032200
1NO
HW-CBL
Operators
Square
Contacts
Contact Block Mounting Adaptor
1. *With spring-up terminals - to use spring-up terminal type,
must use transformer type operator designed for spring-up
transformer.
2. ** DC-DC converter voltage input from 90-140V DC.
ø40mm
Mushroom
Style
Contactors
Transformer Unit
(6V secondary
voltage)
Terminals
Timers
Style
1. In place of k, specify the Lens Color Code.
2. *Mushroom lens not available in yellow.
800-262-IDEC (4332) • USA & Canada
653
Switches & Pilot Devices
Switches & Pilot Devices
ø22mm - HW Series
Signaling Lights
Selector Switches 2-Position (Assembled)
Mounting
Contact
Operator
Position
L
Handle
R
Operator Only
Maintained
L
Spring Return
from Right
L
R
R
Knob
Lever
HWnS-2T
HWnS-2L
HWnS-21T
HWnS-21L
1NO
1
O
X
Knob
Lever
HWnS-2TF10
HWnS-2LF10
HWnS-21TF10
HWnS-21LF10
1NO1NC
1
2
O
X
X
O
Knob
Lever
HWnS-2TF11
HWnS-2LF11
HWnS-21TF11
HWnS-21LF11
2NO
1
2
O
O
X
X
Knob
Lever
HWnS-2TF20
HWnS-2LF20
HWnS-21TF20
HWnS-21LF20
2NO2NC
1
2
3
4
X
O
X
O
O
X
O
X
Knob
Lever
HWnS-2TF22
HWnS-2LF22
HWnS-21TF22
HWnS-21LF22
1. In place of n enter 1 for plastic bezel or 4 for metal bezel.
2. For nameplates, see page 680.
3. All assembled part numbers in catalog include standard fingersafe spring-up (HW-U...) contacts.
4. Standard color for knob and lever is black.
5. Optional colors available for lever type. Must order in
components. See next page for part numbers.
6. Additional contact configurations available (up to 6 total contacts).
7. For Truth Tables see page 693.
n Bezel Type
Type
Code
Plastic
1
Metal
4
Circuit Breakers
Terminal Blocks
Contactors
Timers
Relays & Sockets
2-Position Selector Switches
654
www.IDEC.com
1904032200
Switches & Pilot Devices
ø22mm - HW Series
H
W
1
S
-
2
1
T
F
Switches & Pilot Devices
Part Number Structure
10
Contact Arrangement
10: 1NO
11: 1NO-1NC
20: 2NO
Bezel
1: Plastic
4: Metal
# of Positions
2: 2-Position
Handle
Operator
T: Knob
L: Lever
Signaling Lights
blank: Maintained
1: Spring Return
from Right
Note: Use only for interpreting part numbers.
Do not use for developing part numbers.
Selector Switches 2-Position (Replacement Parts)
Contact Blocks
+
Mounting Adaptor
+
Safety Lever Lock
Anti-Rotation
Ring
1NO
1NC
FingerSafe
Spring-Up
Terminal
HW-U10-F
HW-U01-F
HW-U10R-F
(early make)
HW-U01R-F
(late break)
HW-DB
Style
Completed Unit
Part Number
HW9Z-RL
Use with notched panel cutout to prevent
unit rotation.
Operators
Style
Description
Contact Block Mounting Adaptor
Metal Bezel
Knob
HW1S-2T
HW4S-2T
Lever
HW1S-2
HW4S-2
Knob
HW1S-21T
HW4S-21T
Lever
HW1S-21
HW4S-21
1. Knob operator comes with black handle.
2. To order lever type, lever and inserts must be ordered separately, along with lever
operator. See part numbers below.
Levers & Inserts
Style
Part Number
HW9Z-LS
Lever
TW-HC1-j
Standard lever color is black. Standard
insert color is white.
800-262-IDEC (4332) • USA & Canada
Color
Code
Black*
B
Blue
S
Green
G
Red
R
Yellow
Y
White†
W
Circuit Breakers
Lever
Color
Insert
ASWHHL-j
j Handle/Insert
Color Code
Terminal Blocks
Part Number
Plastic Bezel
Contactors
Spring Return
from Right
1. Used to mount contact blocks to operator (first pair only).
2. IDEC strongly recommends using the safety lever lock to
prevent heavy vibration or maintenance personnel from
inadvertently unlocking contacts.
Safety Lever Lock
Handle
Maintained
Part Number
HW-CB2C
1904032200
=
Timers
Dummy
Block
Style
Operator
Relays & Sockets
Contacts
Style
+
Anti-Rotation Ring
Contact Blocks
Style
+
1. * Lever color inserts not available in black.
2. †Lever not available in white.
655
Switches & Pilot Devices
Selector Switches 3-Position (Assembled)
Relays & Sockets
Timers
Contactors
Terminal Blocks
Circuit Breakers
Mounting
3–Position Selector Switches
Contact
Signaling Lights
Switches & Pilot Devices
ø22mm - HW Series
Operator Position
L
C
Handle
R
Operator Only
Spring Return
from Right
Maintained
L
C
L
R
C
Spring Return
from Left
L
R
C
Spring Return
Two-Way
L
R
C
Knob
Lever
HWnS-3T*
HWnS-3L
HWnS-31T
HWnS-31L
HWnS-32T
HWnS-32L
HWnS-33T
HWnS-33L
R
1NO1NC
1
2
0
0
X
0
X
X
Knob
Lever
HWnS-3TF11
HWnS-3LF11
HWnS-31TF11
HWnS-31LF11
HWnS-32TF11
HWnS-32LF11
HWnS-33TF11
HWnS-33LF11
2NO
1
2
X
0
0
0
0
X
Knob
Lever
HWnS-3TF20
HWnS-3LF20
HWnS-31TF20
HWnS-31LF20
HWnS-32TF20
HWnS-32LF20
HWnS-33TF20
HWnS-33LF20
2NC
1
2
0
X
X
X
X
0
Knob
Lever
HWnS-3TF02
HWnS-3LF02
HWnS-31TF02
HWnS-31LF02
HWnS-32TF02
HWnS-32LF02
HWnS-33TF02
HWnS-33LF02
2NO1NC
1
2
3
X
0
0
0
0
X
0
X
0
Knob
HWnS-3JTF21N1
–
–
–
2NO2NC
1
2
3
4
X
0
0
X
0
0
X
X
0
X
X
0
Knob
HWnS-3TF22
HWnS-31TF22
HWnS-32TF22
HWnS-33TF22
2NO2NC
1
2
3
4
0
X
X
0
0
0
X
0
X
0
0
X
Knob
HWnS-3STF22N9
–
–
–
4NO
1
2
3
4
X
0
X
0
0
0
0
0
0
X
0
X
Knob
4NO
1
2
3
4
X
0
X
0
0
X
0
0
0
X
0
X
Knob
HWnS-3STF40N2
–
–
–
4NC
1
2
3
4
0
X
0
X
X
X
X
X
X
0
X
0
Knob
HWnS-3TF04
HWnS-31TF04
HWnS-32TF04
HWnS-33TF04
n Bezel Type
HWnS-3TF40
HWnS-31TF40
1. In place of n enter 1 for plastic bezel or 4 for metal bezel.
2. Knob operator includes black knob/lever operator includes black lever.
3. * Three position operator is available with three different cams.
HWnS-3T: Maintained (standard cam)
HWnS-3ST: Maintained (S cam)
HWnS-3JT: Maintained (J cam)
4. Operator cams are color coded (white=standard cam, red=S cam, black =J cam).
5. For nameplates, see page 680.
6. For contact assembly part numbers, see page 685
656
HWnS-32TF40
HWnS-33TF40
Type
Code
Plastic
1
Metal
4
7. All assembled part numbers in catalog include standard finger-safe spring-up (HW-U...)
contacts.
8. Standard color for knob and lever is black.
9. Optional colors available for lever type. Must order in components. See next page for
part numbers.
10. Additional contact configurations available (up to 6 total contacts).
11. For Truth Tables see page 693.
www.IDEC.com
1904032200
Switches & Pilot Devices
ø22mm - HW Series
Switches & Pilot Devices
Part Number Structure
H
W
1
S
-
3
1
T
F
20
Contact Arrangement
11: 1NO-1NC
20: 2NO
21: 2NO-1NC
22: 2NO-2NC
40: 4NO
04: 4NC
Bezel
1: Plastic
4: Metal
# of Positions
3: 3-Position
Handle
Operator
T: Knob
L: Lever
Note: Use only for interpreting part numbers.
Do not use for developing part numbers.
Signaling Lights
blank: Maintained
1: Spring Return from Right
2: Spring Return from Left
3: Spring Return Two Way
Selector Switches 3-Position (Replacement Parts)
Contact Blocks
+
Mounting Adaptor
+
Safety Lever Lock
Anti-Rotation
Ring
1NC
FingerSafe
Spring-Up
Terminal
HW-U10-F
HW-U01-F
HW-U10R-F
(early make)
HW-U01R-F
(late break)
Style
Completed Unit
Part Number
HW-DB
Part Number
Description
Handle
Plastic Bezel
Metal Bezel
Maintained
(standard cam)
Knob
HW1S-3T
HW4S-3T
Lever
HW1S-3
HW4S-3
Maintained (S cam)
Knob
HW1S-3ST
HW4S-3ST
Maintained (J cam)
Knob
HW1S-3JT
HW4S-3JT
Spring Return from
Right (standard cam)
Knob
HW1S-31T
HW4S-31T
Lever
HW1S-31
HW4S-31
Spring Return from
Left (standard cam)
Knob
HW1S-32T
HW4S-32T
Lever
HW1S-32
HW4S-32
2-Way Spring Return
(standard cam)
Knob
HW1S-33T
HW4S-33T
Lever
HW1S-33
HW4S-33
Contactors
HW-CB2C
Levers & Inserts
Style
j Handle/Insert Color Code
Part Number
HW9Z-LS
Lever
ASWHHL-j
Lever
Color
Insert
TW-HC1-j
Black*
B
Color
Blue
S
Yellow
Code
Y
Green
G
White
W
Red
R
†
Circuit Breakers
Terminal Blocks
1. Knob operator comes with black handle.
2. Three position knob operator is available with three different cams.
3. Operator cams are color coded (white=standard cam, red=S cam, black =J cam).
4. To order lever type, lever and inserts must be ordered separately, along with lever operator.
See part numbers below.
1. Used to mount contact blocks to operator (first pair only).
2. IDEC strongly recommends using the safety lever lock to
prevent heavy vibration or maintenance personnel from
inadvertently unlocking contacts.
Part Number
Use with notched panel cutout to
prevent unit rotation.
Operators
Contact Block Mounting Adaptor
Safety Lever Lock
HW9Z-RL
Style
1904032200
=
Timers
1NO
Dummy
Block
Style
Operator
Relays & Sockets
Contacts
Style
+
Anti-Rotation Ring
Contact Blocks
Style
+
1. * Lever color inserts not
available in black.
2. †Lever not available in white.
Standard lever color is black. Standard
insert color is white.
800-262-IDEC (4332) • USA & Canada
657
Switches & Pilot Devices
Switches & Pilot Devices
ø22mm - HW Series
Signaling Lights
Selector Switches 4- & 5-Position (Assembled)
2
3
4
Maintained
1
2
3
4
Operator Only
Mounting
1
Handle
Contact
Mounting
Contact
5-Position Selector Switch
Operator Position
Knob
Lever
HWnS-4T
HWnS-4L
Operator Only
2NO2NC
1NO2NC
1
2
3
4
X
0
0
0
0
X
0
0
O
0
X
0
O
0
0
0
Knob
Lever
HWnS-4TF12
HWnS-4LF12
1NO3NC
1
2
3
4
O
O
O
O
X
X
O
O
X
O
X
O
X
O
O
X
Knob
Lever
HWnS-4TF13N6
HWnS-4LF13N6
2NO2NC
1
2
3
4
X
O
O
O
O
X
O
O
O
O
X
O
O
O
O
X
Knob
Lever
HWnS-4TF22N3
HWnS-4LF22N3
1. In place of n enter 1 for plastic bezel or 4 for metal bezel.
2. Knob operator includes black knob/lever operator includes black lever.
3. For nameplates, see page 680.
4. For contact assembly part numbers, see page 685.
5. Five position circuit cannot be made to make five independent contact closures.
6. All assembled part numbers in catalog include standard finger-safe spring-up (HW-U...)
contacts.
7. Standard color for knob and lever is black.
8. Optional colors available for lever type. Must order in components. See next page for
part numbers.
9. Additional contact configurations available (up to 6 total contacts).
10. For Truth Tables see page 693.
1
2
3
4
Operator Position
1
X
O
O
O
2
O
X
O
O
3
O
O
O
O
4
O
O
X
O
Handle
5
O
O
O
X
Maintained
1
2
3
4
5
Knob
Lever
HWnS-5T
HWnS-5L
Knob
Lever
HWnS-5TF22N3
HWnS-5LF22N3
n Bezel Type
Type
Code
Plastic
1
Metal
4
Circuit Breakers
Terminal Blocks
Contactors
Timers
Relays & Sockets
4-Position Selector Switches
658
www.IDEC.com
1904032200
Switches & Pilot Devices
ø22mm - HW Series
Switches & Pilot Devices
Part Number Structure
H
W
1
S
-
4
T
F
13N6
Contact Arrangement
Bezel
1: Plastic
4: Metal
(based on desired truth table)
12: 1NO-2NC
13N6: 1NO-3NC
22N3: 2NO-2NC
# of Positions
4: 4-Position
5: 5-Position
Handle
T: Knob
L: Lever
Signaling Lights
Note: Use only for interpreting part numbers.
Do not use for developing part numbers.
Selector Switches 4- & 5-Position (Replacement Parts)
Contact Blocks
+
Mounting Adaptor
+
Safety Lever Lock
Style
Anti-Rotation
Ring
1NO
1NC
FingerSafe
Spring-Up
Terminal
HW-U10-F
HW-U01-F
HW-U10R-F
(early make)
HW-U01R-F
(late break)
HW-DB
Style
Completed Unit
Part Number
HW9Z-RL
Use with notched panel cutout to prevent
unit rotation.
Operators
Style
Position
Contact Block Mounting Adaptor
4
Part Number
5
1. Used to mount contact blocks to operator (first pair only).
2. IDEC strongly recommends using the safety lever lock to
prevent heavy vibration or maintenance personnel from
inadvertently unlocking contacts.
Handle
Plastic Bezel
Metal Bezel
Knob
HW1S-4T
HW4S-4T
Lever
HW1S-4
HW4S-4
Knob
HW1S-5T
HW4S-5T
Lever
HW1S-5
HW4S-5
Maintained
Maintained
1. Knob operator comes with black handle.
2. To order lever type, lever and inserts must be ordered separately, along with lever operator. See
part numbers below.
Levers & Inserts
Style
Part Number
Part Number
Lever
HW9Z-LS
Lever
Color
Insert
TW-HC1-j
Standard lever color is black. Standard
insert color is white.
800-262-IDEC (4332) • USA & Canada
Color
Code
Black*
B
Blue
S
Green
G
Red
R
Yellow
Y
White
W
†
Circuit Breakers
ASWHHL-j
j Handle/Insert
Color Code
Terminal Blocks
Safety Lever Lock
Description
Contactors
HW-CB2C
1904032200
=
Timers
Dummy
Block
Style
Operator
Anti-Rotation Ring
Contacts
Style
+
Relays & Sockets
Contact Blocks
+
1. * Lever color inserts not
available in black.
2. †Lever not available in white.
659
Switches & Pilot Devices
Key Switches 2-Position (Assembled)
Operator
Position
L
R
Operator Only
Maintained
L
R
Spring Return
from Right
L
HWnK-2A
HWnK-21B
R
1NO
1
O
X
HWnK-2AF10
HWnK-21BF10
1NO1NC
1
2
0
X
X
0
HWnK-2AF11
HWnK-21BF11
2NO
1
2
O
O
X
X
HWnK-2AF20
HWnK-21BF20
2NO2NC
1
2
3
4
0
X
0
X
X
0
X
0
HWnK-2AF22
HWnK-21BF22
Timers
Relays & Sockets
Mounting
2-Position Key Switches
Contact
Signaling Lights
Switches & Pilot Devices
ø22mm - HW Series
Contactors
1. In place of n enter 1 for plastic bezel or 4 for metal bezel.
2. Key is removable in all maintained positions. Other key removable options available.
3. Two keys are supplied with all switches.
4. All standard operators are keyed alike.
5. Other key removable options available. See table below
6. For nameplates, see page 680.
7. For contact assembly part numbers, see page 685.
8. Key is retained in “Spring Return” position.
9. All assembled part numbers in catalog include finger-safe spring-up (HW-U...) contacts.
10. Additional contact configurations available (up to 6 total contacts).
11. For Truth Tables see page 685.
n Bezel Type
Type
Code
Plastic
1
Metal
4
Code
Description
A
Key not retained in any position (removable in all positions)
B
Key retained in right position only (removable LEFT)
C
Key retained in left position only (removable RIGHT)
Circuit Breakers
Terminal Blocks
Key Removable Option Codes
660
www.IDEC.com
1904032200
Switches & Pilot Devices
ø22mm - HW Series
Switches & Pilot Devices
Part Number Structure
H
W
1
K
-
2
1
B
F
10
Contact Arrangement
10: 1NO
20: 2NO
11: 1NO-1NC 22: 2NO-2NC
Bezel
1: Plastic
4: Metal
# of Positions
2: 2-Position
Operator
Key Retained Position
blank: Maintained
1: Spring Return from Right
Note: Use only for interpreting part numbers.
Do not use for developing part numbers.
Signaling Lights
A: Key not retained in any position (removable in all positions)
B: Key retained in right position only (removable LEFT)
C: Key retained in left position only (removable RIGHT)
Key Switches 2-Position (Replacement Parts)
Contact Assembly
+
Mounting Adaptor
+
Safety Lever Lock
Anti-Rotation
Ring
+
Operator
=
Completed Unit
Relays & Sockets
Safety Lever Lock
Contact Blocks
Style
+
1NO
1NC
FingerSafe
Spring-Up
Terminal
HW-U10-F
HW-U01-F
HW-U10R-F
(early make)
HW-U01R-F
(late break)
Style
Part Number
HW9Z-LS
Timers
Contacts
Anti-Rotation Ring
Dummy
Block
HW-DB
Style
Part Number
HW9Z-RL
Contact Block Mounting Adaptor
Part Number
Operators
Style
HW-CB2C
Description
Plastic Bezel
Metal Bezel
Maintained
HW1K-2A
HW4K-2A
Maintained, key removed
left only
HW1K-2B
HW4K-2B
Spring Return from Right
HW1K-21B
HW4K-21B
Maintained, key removed
right only
HW1K-2C
HW4K-2C
Terminal Blocks
1. Used to mount contact blocks to operator
(first pair only).
2. IDEC strongly recommends using the
safety lever lock to prevent heavy
vibration or maintenance personnel from
inadvertently unlocking contacts.
Contactors
Style
Use with notched panel cutout to prevent unit rotation.
1. Operator includes two keys.
2. All standard operators are keyed alike.
Circuit Breakers
1904032200
800-262-IDEC (4332) • USA & Canada
661
Switches & Pilot Devices
Key Switches 3-Position (Assembled)
Mounting
3-Position Key Switches
Contact
Signaling Lights
Switches & Pilot Devices
ø22mm - HW Series
Operator Position
L
C
R
Spring Return
from Right
Maintained
L
C
L
R
C
R
Spring Return
from Left
L
C
Spring Return Two
Way
L
R
C
R
n Bezel Type
Circuit Breakers
Terminal Blocks
Contactors
Timers
Relays & Sockets
Operator Only
HWnK-3A*
HWnK-31B
HWnK-32C
HWnK-33D
Type
Code
HWnK-31BF11
HWnK-32CF11
HWnK-33DF11
Plastic
1
Metal
4
1NO1NC
1
2
0
0
X
0
X
X
HWnK-3AF11
2NO
1
2
X
0
0
0
0
X
HWnK-3AF20
HWnK-31BF20
HWnK-32CF20
HWnK-33DF20
2NC
1
2
0
X
X
X
X
0
HWnK-3AF02
HWnK-31BF02
HWnK-32CF02
HWnK-33DF02
2NO1NC
1
2
3
X
0
0
0
0
X
0
X
0
HWnK-3JAF21N1
2NO2NC
1
2
3
4
X
0
0
X
0
0
X
X
0
X
X
0
HWnK-3AF22
2NO2NC
1
2
3
4
0
X
X
0
0
0
X
0
X
0
0
X
HWnK-3SAF22N9
4NO
1
2
3
4
X
0
X
0
0
0
0
0
0
X
0
X
HWnK-3AF40
4NO
1
2
3
4
X
0
X
0
0
X
0
0
0
X
0
X
HWnK-3SAF40N2
4NC
1
2
3
4
0
X
0
X
X
X
X
X
X
0
X
0
HWnK-3AF04
1. In place of n enter 1 for plastic bezel or 4 for metal
bezel.
2. Key is removable in all maintained positions. Other
key removable options available.
3. Two keys are supplied with all switches.
4. All standard operators are keyed alike.
5. Other key removable options available. See table to
the right.
6. * Operator is available with three different cams.
HWnK-3A: Maintained (standard cam)
HWnK-3SA: Maintained (Cam S)
HWnK-3JA: Maintained (Cam J)
7. For nameplates, see page 680.
662
–
HWnK-31BF22
–
HWnK-31BF40
–
HWnK-31BF04
–
HWnK-32CF22
–
HWnK-33DF22
–
HWnK-32CF40
–
HWnK-33DF40
–
HWnK-32CF04
8. For contact assembly part numbers, see page 685.
9. All assembled part numbers in catalog include
standard Finger-Safe spring-up (HW-U...) contacts.
10. Additional contact configurations available (up to 6
total contacts).
11. For Truth Tables see page 693.
www.IDEC.com
–
HWnK-33DF04
Key Removable Option Codes
Code
Description
A
Key not retained in any position (removable in all positions)
B
Key retained in right position only
C
Key retained in left position only
D
Key retained in left and right (3 position only)
E
Key retained in center only (3 position only)
G
Key retained right and center (3 position only)
H
Key retained left and center (3 position only)
1904032200
Switches & Pilot Devices
ø22mm - HW Series
Switches & Pilot Devices
Part Number Structure
H
W
1
K
-
3
1
B
F
11
Contact Arrangement
11: 1NO-1NC 40: 4NO
20: 2NO
04: 4NC
22: 2NO-2NC
Bezel
1: Plastic
4: Metal
# of Positions
3: 3-Position
Operator
blank: Maintained
1: Spring Return from Right
2: Spring Return from Left
3: Spring Return Two Way
Contact Assembly
+
Key Switches 3-Position (Replacement Parts)
Mounting Adaptor
+
Safety Lever Lock
+
Anti-Rotation
Ring
+
Operator
=
Completed Unit
Relays & Sockets
Safety Lever Lock
Contact Blocks
Style
(see chart on previous page)
Signaling Lights
Note: Use only for interpreting part numbers.
Do not use for developing part numbers.
Key Removable Option Code
1NO
1NC
FingerSafe
Spring-Up
Terminal
HW-U10-F
HW-U01-F
HW-U10R-F
(early make)
HW-U01R-F
(late break)
Dummy
Block
HW-DB
Style
Part Number
HW9Z-LS
Timers
Contacts
Anti-Rotation Ring
Style
Part Number
HW9Z-RL
Contact Block Mounting Adaptor
Part Number
Operators
Style
HW-CB2C
1.
2.
3.
4.
Description
Plastic Bezel
Metal Bezel
Maintained (standard cam)
HW1K-3A
HW4K-3A
Maintained (S cam)
HW1K-3SA
HW4K-3SA
Maintained (J cam)
HW1K-3JA
HW4K-3JA
Spring Return from Right (standard cam)
HW1K-31B
HW4K-31B
Spring Return from Left (standard cam)
HW1K-32C
HW4K-32C
2-Way Spring Return (standard cam)
HW1K-33D
HW4K-33D
Terminal Blocks
1. Used to mount contact blocks to operator
(first pair only).
2. IDEC strongly recommends using the
safety lever lock to prevent heavy
vibration or maintenance personnel from
inadvertently unlocking contacts.
Contactors
Style
Use with notched panel cutout to prevent
unit rotation.
Operator includes two keys.
All standard operators are keyed alike.
Other key removable options available. See table on previous page.
Key not removable from spring-returned position
Circuit Breakers
1904032200
800-262-IDEC (4332) • USA & Canada
663
Switches & Pilot Devices
Switches & Pilot Devices
ø22mm - HW Series
Signaling Lights
Illuminated Selector Switches 2-Position (Assembled)
2-Position Illuminated Selector Switches
Mounting
Contact
Relays & Sockets
Style
Operator
Position
L
Part Number
Type
R
L
Operator Only
Full Voltage
1NO1NC
1
2
O
X
X
O
2NO
1
2
X
O
O
X
2NO2NC
1
2
3
4
O
X
O
X
X
O
X
O
Transformer
120V
240V
480V
Terminal Blocks
Circuit Breakers
120V
240V
480V
Full Voltage
Transformer
120V
240V
480V
L
R
R
HWnF-2k
HWnF-21k
HWnF-2F11QD-k-l
HWnF-21F11QD-k-l
HWnF-2F11H2D-k
HWnF-2F11M4D-k
HWnF-2F11T8D-k
HWnF-21F11H2D-k
HWnF-21F11M4D-k
HWnF-21F11T8D-k
HWnF-2F20QD-k-l
HWnF-21F20QD-k-l
HWnF-2F20H2D-k
HWnF-2F20M4D-k
HWnF-2F20T8D-k
HWnF-21F20H2D-k
HWnF-21F20M4D-k
HWnF-21F20T8D-k
HWnF-2F22QD-k-l
HWnF-21F22QD-k-l
HWnF-2F22H2D-k
HWnF-2F22M4D-k
HWnF-2F22T8D-k
HWnF-21F22H2D-k
HWnF-21F22M4D-k
HWnF-21F22T8D-k
1. In place of k specify Lens/LED color code.
2. In place of l specify Full Voltage code.
3. In place of n enter 1 for plastic bezel or 4 for metal bezel.
4. For nameplates, see page 680.
5. For contact assembly part numbers, see page 685.
6. Light is independent of switch position.
7. All assembled part numbers in catalog include standard Finger-Safe spring-up (HW-U...) contacts.
8. Yellow selector switch comes with white LED.
9. Additional contact configurations available (up to 6 total contacts).
10. For Truth Tables see page 693.
Contactors
Timers
Full Voltage
Transformer
Spring Return from
Right
Maintained
k Lens/LED Color Code
l Full Voltage Code
n Bezel Code
Color
Code
Type
Code
Amber
A
Voltage
Code
Plastic
1
Green
G
6VAC/DC
6V
Metal
4
Red
R
12VAC/DC
12V
Blue
S
24VAC/DC
24V
White
W
120V AC
120V
Yellow
Y
240V AC
240V
664
Full Voltage Models
www.IDEC.com
1904032200
Switches & Pilot Devices
W
1
F
Part Number Structure
– 21 F 20 Q D – G – 24V
Bezel
1: Plastic
4: Metal
LED Voltage
(Full voltage units only)
6V: 6V AC/DC
A: Amber S: Blue
G: Green W: White 12V: 12V AC/DC
R: Red
Y: Yellow 24V: 24V AC/DC
120V: 120V AC
240V: 240V AC
Lens Color
Position
Contact Arrangement
2: Maintained
21: Spring Return
from Right
11: 1NO-1NC
20: 2NO
22: 2NO-2NC
Illumination Circuit
Illuminated Selector Switches 2-Position (Replacement Parts)
Transformer*
+
Contact
Blocks
+
Lead
Holder
+
Mounting
Adaptor
+
Safety
Lever Lock
+
LED
+
Anti-Rotation
Ring
+
Operator
+
Lens
=
Completed Unit
Lamp Circuit Components
Contact Blocks
Description
Lead Holder
For use with HW-CBL on all
illuminated pushbutton units.
HW-LH3
One required for each deck (pair)
of contacts.
Finger-Safe
HW-DA1FBN
120VAC
240VAC
480VAC
Finger-Safe
Style
Part Number
Finger-Safe
TW-DA1FB
TW-F126B
TW-F246B
TW-F486B
1. Used to mount contact blocks to
operator (first pair only).
2. IDEC strongly recommends
using the safety lever lock to prevent
heavy vibration or maintenance
personnel from inadvertently
unlocking contacts.
110VDC
Part Number
Description
1904032200
HW1F-2
HW4F-2
Spring return
from right
HW1F-21
HW4F-21
Illuminated knobs must be ordered separately.
Code
Color
Code
Amber
A
Blue
S
Green
G
White
W
Red
R
Yellow
Y
Anti-Rotation Ring
Style
Appearance
Part Number
HW9Z-FDY-k
In place of k, specify the
Color Code.
800-262-IDEC (4332) • USA & Canada
Part Number
HW9Z-RL
Use with notched panel cutout to
prevent unit rotation.
Lamps
Voltage
Part Number
6V AC/DC
LSTD-6k
12V AC/DC
LSTD-1k
24V AC/DC
LSTD-2k
120V AC
LSTD-H2k
240V AC
LSTD-M4k
1. In place of k, specify the LED Color Code.
2. The LED contains a current-limiting resistor and
reverse polarity protection diodes.
3. Use white LED for yellow lens. Yellow LED not
available.
Circuit Breakers
Maintained
Color
LED
Illuminated Knob
Metal Bezel
HW-U01-F
HW-U01R-F
(late break)
Terminal Blocks
Style
HW-U10-F
HW-U10R-F
(early make)
HW9Z-LS
1. DC-DC convertor features spring-up terminals.
2. DC-DC convertor applicable voltage range 90-140V DC.
Plastic
Bezel
Finger-Safe
Spring-Up
Terminal
Style
HW-L16D
Operators
1NC
Safety Lever Lock
Style
DC-DC Converter
1NO
Contact Block Mounting Adaptor k Lens/LED Color Code
HW-CBL
For use with
even number of
contacts.
Contacts
Contactors
Transformer Unit
(6V secondary
voltage)
For use with
odd number of
contacts.
Style
Timers
Full Voltage Adaptor
Terminals
Part
Number
Style
Dummy Block with
Full Voltage Adaptor
Relays & Sockets
*Transformer not needed with full voltage models.
Signaling Lights
Q: Full Voltage
H2: Transformer 120V AC
M4: Transformer 240V AC
T8: Tranformer 480V AC
Note: Use only for interpreting part numbers.
Do not use for developing part numbers.
Switches & Pilot Devices
H
ø22mm - HW Series
665
Switches & Pilot Devices
Signaling Lights
Switches & Pilot Devices
ø22mm - HW Series
Illuminated Selector Switches 3-Position (Assembled)
3-Position Illuminated Selector Switches
Mounting
Contact
Relays & Sockets
Style
Part Number
Operator Position
L
C
Type
R
L
Operator Only
Full Voltage
1NO1NC
1
2
O
O
X
O
X
X
2NO
1
2
X
0
0
0
O
X
2NC
1
2
O
X
X
X
X
O
1
2
3
4
X
O
O
X
O
O
X
X
O
X
X
O
Full Voltage
2NO2NC
X
O
X
O
O
O
O
O
O
X
O
X
Full Voltage
4NO
1
2
3
4
O
X
O
X
X
X
X
X
X
O
X
O
Full Voltage
4NC
1
2
3
4
Transformer
120V
240V
480V
Circuit Breakers
Terminal Blocks
Contactors
Timers
Full Voltage
Transformer
120V
240V
480V
Full Voltage
Transformer
Transformer
Transformer
Transformer
1. In place of k specify Lens/LED color
code.
2. In place of l specify Full Voltage
code.
3. In place of n enter 1 for plastic bezel
or 4 for metal bezel.
4. For nameplates, see page 680.
5. For contact assembly part numbers,
see page 685.
6. Light is independent of switch position.
7. All assembled part numbers in catalog
include standard Finger-Safe spring-up
(HW-U..) contacts.
666
Spring Return from
Right
Maintained
120V
240V
480V
120V
240V
480V
120V
240V
480V
120V
240V
480V
C
L
R
C
R
Spring Return from
Left
L
C
Spring Return TwoWay
L
R
C
R
HWnF-3k
HWnF-31k
HWnF-32k
HWnF-33k
HWnF-3F11QD-k-l
HWnF-31F11QD-k-l
HWnF-32F11QD-k-l
HWnF-33F11QD-k-l
HWnF-3F11H2D-k
HWnF-3F11M4D-k
HWnF-3F11T8D-k
HWnF-31F11H2D-k
HWnF-31F11M4D-k
HWnF-31F11T8D-k
HWnF-32F11H2D-k
HWnF-32F11M4D-k
HWnF-32F11T8D-k
HWnF-33F11H2D-k
HWnF-33F11M4D-k
HWnF-33F11T8D-k
HWnF-3F20QD-k-l
HWnF-31F20QD-k-l
HWnF-32F20QD-k-l
HWnF-33F20QD-k-l
HWnF-3F20H2D-k
HWnF-3F20M4D-k
HWnF-3F20T8D-k
HWnF-31F20H2D-k
HWnF-31F20M4D-k
HWnF-31F20T8D-k
HWnF-32F20H2D-k
HWnF-32F20M4D-k
HWnF-32F20T8D-k
HWnF-33F20H2D-k
HWnF-33F20M4D-k
HWnF-33F20T8D-k
HWnF-3F02QD-k-l
HWnF-31F02QD-k-l
HWnF-32F02QD-k-l
HWnF-33F02QD-k-l
HWnF-3F02H2D-k
HWnF-3F02M4D-k
HWnF-3F02T8D-k
HWnF-31F02H2D-k
HWnF-31F02M4D-k
HWnF-31F02T8D-k
HWnF-32F02H2D-k
HWnF-32F02M4D-k
HWnF-32F02T8D-k
HWnF-33F02H2D-k
HWnF-33F02M4D-k
HWnF-33F02T8D-k
HWnF-3F22QD-k-l
HWnF-31F22QD-k-l
HWnF-32F22QD-k-l
HWnF-33F22QD-k-l
HWnF-3F22H2D-k
HWnF-3F22M4D-k
HWnF-3F22T8D-k
HWnF-31F22H2D-k
HWnF-31F22M4D-k
HWnF-31F22T8D-k
HWnF-32F22H2D-k
HWnF-32F22M4D-k
HWnF-32F22T8D-k
HWnF-33F22H2D-k
HWnF-33F22M4D-k
HWnF-33F22T8D-k
HWnF-3F40QD-k-l
HWnF-31F40QD-k-l
HWnF-32F40QD-k-l
HWnF-33F40QD-k-l
HWnF-3F40H2D-k
HWnF-3F40M4D-k
HWnF-3F40T8D-k
HWnF-31F40H2D-k
HWnF-31F40M4D-k
HWnF-31F40T8D-k
HWnF-32F40H2D-k
HWnF-32F40M4D-k
HWnF-32F40T8D-k
HWnF-33F40H2D-k
HWnF-33F40M4D-k
HWnF-33F40T8D-k
HWnF-3F04QD-k-l
HWnF-31F04QD-k-l
HWnF-32F04QD-k-l
HWnF-33F04QD-k-l
HWnF-3F04H2D-k
HWnF-3F04M4D-k
HWnF-3F04T8D-k
HWnF-31F04H2D-k
HWnF-31F04M4D-k
HWnF-31F04T8D-k
HWnF-32F04H2D-k
HWnF-32F04M4D-k
HWnF-32F04T8D-k
HWnF-33F04H2D-k
HWnF-33F04M4D-k
HWnF-33F04T8D-k
8. Yellow selector switch comes
with white LED.
9. Additional contact configurations
available (up to 6 total contacts).
10. For Truth Tables see page 693.
k Lens/LED Color
l Full Voltage Code
Color
Code
Type
Code
Amber
A
Voltage
Code
Plastic
1
Green
G
6VAC/DC
6V
Metal
4
Red
R
12VAC/DC
12V
Blue
S
24VAC/DC
24V
White
W
120V AC
120V
Yellow
Y
240V AC
240V
www.IDEC.com
Full Voltage Models
n Bezel Code
1904032200
Switches & Pilot Devices
W
1
F
Part Number Structure
– 31 F 20 Q D – G – 24V
Bezel
Transformer*
+
+
6V: 6V AC/DC
12V: 12V AC/DC
A: Amber S: Blue
G: Green W: White 24V: 24V AC/DC
R: Red
Y: Yellow 120V: 120V AC
240V: 240V AC
Contact Arrangement
11: 1NO-1NC 22: 2NO-2NC Illumination Circuit
20: 2NO
40: 4NO
Q: Full Voltage
02: 2NC
04: 4NC
H2: Transformer 120V AC
M4: Transformer 240V AC
T8: Tranformer 480V AC
Note: Use only for interpreting part numbers.
Do not use for developing part numbers.
Contact
Blocks
Full Voltage Code
Lens Color
Illuminated Selector Switches 3-Position (Replacement Parts)
Lead
Holder
+
Mounting
Adaptor
+
Safety
Lever Lock
+
LED
+
Anti-Rotation
Ring
+
Operator
+
Lens
=
Completed Unit
Lamp Circuit Components
Contact Blocks
Lead Holder
For use with HW-CBL on all
illuminated pushbutton units.
One required for each deck
(pair) of contacts.
HW-LH3
For use with
odd number of
contacts.
HW-DA1FBN
120VAC
240VAC
480VAC
Style
Finger-Safe
HW-U01-F
HW-U01R-F
(late break)
Finger-Safe
TW-F126B
TW-F246B
TW-F486B
1. Used to mount contact blocks to
operator (first pair only).
2. IDEC strongly recommends
using the safety lever lock to prevent
heavy vibration or maintenance
personnel from inadvertently unlocking
contacts.
Color
Code
Color
Code
Amber
A
Blue
S
Green
G
White
W
Red
R
Yellow
Y
Anti-Rotation Ring
Style
HW9Z-RL
Safety Lever Lock
Part Number
HW-L16D
HW9Z-LS
Plastic Bezel
Metal
Bezel
Maintained
HW1F-3
HW4F-3
Spring return from right
HW1F-31
HW4F-31
Spring return from left
HW1F-32
HW4F-32
2-Way spring return
HW1F-33
HW4F-33
Appearance
Part Number
HW9Z-FDY-k
In place of k, specify the Color Code.
Style
800-262-IDEC (4332) • USA & Canada
Voltage
Part Number
6V AC/DC
LSTD-6k
12V AC/DC
LSTD-1k
24V AC/DC
LSTD-2k
120V AC
LSTD-H2k
240V AC
LSTD-M4k
1. In place of k, specify the LED Color Code.
2. The LED contains a current-limiting resistor and
reverse polarity protection diodes.
3. Use white LED for yellow lens. Yellow LED not
available.
667
Circuit Breakers
Illuminated knobs must be ordered separately.
Use with notched panel cutout to prevent
unit rotation.
Lamps
LED
Illuminated Knob
Part Number
Terminal Blocks
1904032200
HW-U10-F
HW-U10R-F
(early make)
TW-DA1FB
Operators
Finger-Safe
Spring-Up
Terminal
HW-CBL
110VDC
Description
1NC
Part Number
1. DC-DC convertor features spring-up terminals.
2. DC-DC convertor applicable voltage range 90-140V DC.
Style
1NO
Contact Block Mounting Adaptor k Lens/LED Color Code
Style
DC-DC Converter
Contacts
Contactors
Transformer Unit
(6V secondary
voltage)
For use with
even number of
contacts.
Finger-Safe
Style
Timers
Description
Full Voltage Adaptor
Terminals
Part
Number
Style
Dummy Block with
Full Voltage Adaptor
Relays & Sockets
*Transformer not needed with full voltage models.
Signaling Lights
1: Plastic Position
4: Metal 3: Maintained
31: Spring Return
from Right
32: Spring Return
from Left
33: Spring Return 2-Way
Switches & Pilot Devices
H
ø22mm - HW Series
Switches & Pilot Devices
Switches & Pilot Devices
ø22mm - HW Series
Signaling Lights
Mono Lever Switches 2-Position (Assembled)
2-Position Mono Lever Switches
HW1M
Standard Lever
Timers
Relays & Sockets
Style
Description
HW1M-F1010-20
Maintained up and down
HW1M-F2020-20
Spring return up and down
HW1M-F1010-40
Maintained up and down
HW1M-F2020-40
Spring return up and down
HW1M-F0101-20
Maintained right and left
HW1M-F0202-20
Spring return right and left
HW1M-F0101-40
Maintained right and left
HW1M-F0202-40
Spring return right and left
HW1M-LF1010-20
Maintained up and down
HW1M-LF2020-20
Spring return up and down
HW1M-LF1010-40
Maintained up and down
HW1M-LF2020-40
Spring return up and down
HW1M-LF0101-20
Maintained right and left
HW1M-LF0202-20
Spring return right and left
HW1M-LF0101-40
Maintained right and left
HW1M-LF0202-40
Spring return right and left
Circuit Diagrams
2 Position Left/Right
Circuit
Number
20
40
Contact Mounting
No.
Position
Left
Center
Right
X
0
0
HW-U10-F
0
0
X
HW-U10-F
X
0
0
HW-U10-F
0
0
X
HW-U10-F
X
0
0
HW-U10-F
0
0
X
1
HW-U10-F
2
1
2
3
4
2 Position Up/Down
Circuit
Number
20
40
All Assembled units with Finger-Safe spring-up (HW-U...) contacts
Contact Mounting
No.
Position
Down
Center
Up
X
0
0
HW-U10-F
0
0
X
HW-U10-F
X
0
0
HW-U10-F
0
0
X
HW-U10-F
X
0
0
HW-U10-F
0
0
X
1
HW-U10-F
2
1
2
3
4
Circuit Breakers
Terminal Blocks
Contactors
HW1M-L
Interlocking Lever
Part Number
668
www.IDEC.com
1904032200
Switches & Pilot Devices
ø22mm - HW Series
Switches & Pilot Devices
Part Number Structure
H
W
1
M
-
L F 0
1
0
1
20
up right down left
Type
blank: Standard
L: Interlocking
Circuit Number
20 or 40 (see contact arrangement on previous page)
Lever Action
1: Maintained
2: Spring
0: Blocked
Note: Use only for interpreting part numbers.
Do not use for developing part numbers.
Signaling Lights
Mono Lever Switches 2-Position (Sub-assembled) Part Numbers
Contact Assembly
+
Mounting Adaptor
+
1NO
1NC
FingerSafe
Spring-Up
Terminal
HW-U10-F
HW-U01-F
HW-U10R-F
(early make)
HW-U01R-F
(late break)
Operator
=
Completed Unit
HW-DB
Contact Block Mounting Adaptor
Style
Part Number
HW9Z-RL
Use with notched panel cutout to prevent
unit rotation.
Timers
Dummy
Block
Operators
Description
Part Number
Standard
Maintained Up/Down
HW1M-1010
Spring return Up/Down
HW1M-2020
Maintained Left/Right
HW1M-0101
Spring return Left/Right
HW1M-0202
Maintained Up/Down
HW1M-L1010
Spring return Up/Down
HW1M-L2020
Maintained Left/Right
HW1M-L0101
Spring return Left/Right
HW1M-L0202
Part Number
Interlocking
1. Used to mount contact blocks to operator (first pair only).
2. IDEC strongly recommends using the safety
lever lock (included) to prevent heavy vibration
or maintenance personnel from inadvertently unlocking
contacts.
Safety Lever Lock
Replacement Parts
Item
Part Number
Terminal Blocks
Part Number
Contactors
Style
HW-CB2C
Style
+
Relays & Sockets
Contacts
Style
Anti-Rotation
Ring
+
Anti-Rotation Ring
Contact Blocks
Style
Safety Lever
Lock
Black Cap
HW9Z-CPM
HW9Z-LS
Boot
HW9Z-BLM (fits standard
operator only)
Circuit Breakers
1904032200
800-262-IDEC (4332) • USA & Canada
669
Switches & Pilot Devices
Switches & Pilot Devices
ø22mm - HW Series
Signaling Lights
Mono Lever Switches 3- & 4-Position (Assembled)
3-Position
4-Position
Relays & Sockets
Style
Part Number
Description
HW1M
Standard Lever
HW1M-F0121-12N3
Maintained right and left,
spring return down
Style
HW1M-F0222-12N3
Spring return right, down, left
HW1M-L
Interlocking Lever
HW1M-LF0121-12N3
Maintained right and left,
spring return down
HW1M-LF0222-12N3
Spring return right, down, left
HW1M
Standard Lever
Circuit Diagram
Timers
Circuit
Number
Contact Mounting
No.
12N3
Position
Down
Left
Center
Up
Right
1
HW-U01-F
0
0
0
O
X
2
HW-U01-F
X
0
0
O
0
3
HW-U10-F
0
X
0
0
0
HW1M-L
Interlocking Lever
Description
HW1M-F1111-22N9
Maintained all positions
HW1M-F1212-22N9
Maintained up and down,
spring left and right
HW1M-2121-22N9
Spring up and down,
maintained left and right
HW1M-2222-22N9
Spring return all positions
HW1M-LF1111-22N9
Maintained all positions
HW1M-LF1212-22N9
Maintained up and down,
spring left and right
HW1M-LF2121-22N9
Spring up and down,
maintained left and right
HW1M-LF2222-22N9
Spring return all positions
Circuit Diagram
Circuit
Number
22N9
Contactors
Part Number
Contact Mounting
No.
Position
Down
Left
Center
Up
Right
1
HW-U01-F
0
O
0
0
X
2
HW-U01-F
X
0
0
0
0
3
HW-U10-F
0
X
0
0
0
4
HW-U10-F
0
0
0
X
0
Circuit Breakers
Terminal Blocks
All assembled part numbers in catalog include Finger-Safe spring-up (HW-U...) contacts.
670
www.IDEC.com
1904032200
Switches & Pilot Devices
ø22mm - HW Series
Switches & Pilot Devices
Part Number Structure
H
W
1
M
-
L F 0
1
2
1
12N3
up right down left
Type
blank: Standard
L: Interlocking
Circuit Number
3 Position: 12N3
4 Position: 22N9
Lever Action
1: Maintained
2: Spring
0: Blocked
Note: Use only for interpreting part numbers.
Do not use for developing part numbers.
Signaling Lights
Mono Lever Switches 3 & 4-Position (Sub-assembled) Part Numbers
Contact Assembly
+
Mounting Adaptor
+
1NO
1NC
FingerSafe
Spring-Up
Terminal
HW-U10-F
HW-U01-F
HW-U10R-F
(early make)
HW-U01R-F
(late break)
Operator
=
Completed Unit
HW-DB
Style
Part Number
HW9Z-RL
Use with notched panel cutout to prevent unit rotation.
Operators
Style
Standard
Contact Block Mounting Adaptor
Part Number
Interlocking
1. Used to mount contact blocks to operator (first pair only).
2. IDEC strongly recommends using the safety lever lock
(included) to prevent heavy vibration or maintenance
personnel from inadvertently unlocking contacts.
Safety Lever Lock
Part Number
Combination, 3 position
HW1M-0121
Spring return, 3 position
HW1M-0222
Maintained, 4 position
HW1M-1111
Combination, 4 position
HW1M-1212
Combination, 4 position
HW1M-2121
Spring return, 4 position
HW1M-2222
Combination, 3 position
HW1M-L0121
Spring return, 3 position
HW1M-L0222
Maintained, 4 position
HW1M-L1111
Combination, 4 position
HW1M-L1212
Combination, 4 position
HW1M-L2121
Spring return, 4 position
HW1M-L2222
Contactors
HW-CB2C
Description
Timers
Dummy
Block
Terminal Blocks
Style
+
Relays & Sockets
Contacts
Style
Anti-Rotation
Ring
+
Anti-Rotation Ring
Contact Blocks
Style
Safety
Lever Lock
Part Number
Replacement Parts
HW9Z-LS
Item
Part Number
Black Cap
HW9Z-CPM
Circuit Breakers
Boot
HW9Z-BLM (fits standard
operator only)
1904032200
800-262-IDEC (4332) • USA & Canada
671
Switches & Pilot Devices
Signaling Lights
Switches & Pilot Devices
ø22mm - HW Series
Pushbutton Selectors (Assembled)
2-Position Pushbutton Selectors
Operator Position
Left
Relays & Sockets
Cam
Contacts
Mounting
Normal
j Button Color Code
Right
Push
Normal
Push
Operator Only
1NO-1NC
A
HW1R-2A-j
1
2
HW-U10-F
HW-U01-F
0
X
X
0
0
0
X
0
1
2
HW-U10-F
HW-U10-F
0
0
X
X
0
X
X
X
HW1R-2AF20-j
2NO-2NC
1
2
3
4
HW-U10-F
HW-U01-F
HW-U10-F
HW-U01-F
0
X
0
X
X
0
X
0
0
0
0
0
X
0
X
0
HW1R-2AF22-j
2NO
1
2
HW-U10-F
HW-U10-F
0
0
X
0
0
0
0
X
HW1R-2DF20-j
2NO-2NC
1
2
3
4
HW-U10-F
HW-U10-F
HW-U01-F
HW-U01-F
0
0
X
X
X
0
0
X
0
0
X
X
0
X
X
0
HW1R-2DF22N1-j
1
2
3
4
HW-U10-F
HW-U10-F
HW-U01-F
HW-U01-F
0
0
0
X
X
0
0
X
0
0
X
0
0
X
X
0
1
2
3
4
HW-U10-F
HW-U10-F
HW-U01-F
HW-U01-F
0
0
0
X
0
X
0
0
0
0
X
0
X
0
0
0
1
2
3
4
HW-U01-F
HW-U10-F
HW-U01-F
HW-U10-F
0
0
0
0
0
X
0
X
X
0
X
0
0
X
0
X
Timers
D
Contactors
2NO-2NC
2NO-2NC
Terminal Blocks
Code
Black
B
White
W
Green
G
Yellow
Y
Red
R
Blue
S
HW1R-2EF22N1-j
HW1R-2FF22N1-j
HW1R-2N-j
Operator Only
T
Circuit Breakers
2NO-2NC
Color
HW1R-2F-j
Operator Only
N
Code
HW1R-2E-j
Operator Only
2NO-2NC
Color
HW1R-2D-j
Operator Only
F
HW1R-2AF11-j
2NO
Operator Only
E
Part Number
HW1R-2NF22N2-j
HW1R-2T-j
1
2
3
4
HW-U10-F
HW-U10-F
HW-U01-F
HW-U01-F
0
0
X
X
X
X
0
0
X
X
0
0
Blocked
HW1R-2TF22N1-j
1. All assembled part numbers in catalog include Finger-Safe
spring-up (HW-U...) contacts.
2. Operator only models come with operator and button.
672
www.IDEC.com
1904032200
Switches & Pilot Devices
ø22mm - HW Series
Switches & Pilot Devices
Part Number Structure
H
W
1
R
-
2
D
F
22N1 – R
Button Colors
Operator
B: Black
G: Green
R: Red
S: Blue
W: White
Y: Yellow
Contact Arrangement Code
11: 1NO-1NC
20: 2NO
(For additional contact codes see
previous page)
Signaling Lights
A: Cam A
D: Cam D
E: Cam E
F: Cam F
N: Cam N
T: Cam T
Note: Use only for interpreting part numbers.
Do not use for developing part numbers.
Pushbutton Selectors (Sub-assembled)
Contact Blocks
+
Mounting Adaptor
+
Safety Lever
Lock
Anti-Rotation
Ring
+
Operator
Contacts
1NO
1NC
FingerSafe
Spring-Up
Terminal
HW-U10-F
HW-U01-F
HW-U10R-F
(early make)
HW-U01R-F
(late break)
=
Completed Unit
Buttons
Style
Part Number
Part Number
Round Flush
HW9Z-LS
HW1A-B1-j
Anti-Rotation Ring
HW-DB
Style
HW9Z-RL
(safety lever lock included)
Part Number
Use with notched panel cutout to prevent
unit rotation.
Style
Part
Number
Cam A
HW1R-2A
Cam D
HW1R-2D
Cam E
HW1R-2E
Cam F
HW1R-2F
Cam N
HW1R-2N
Cam T
HW1R-2T
j Button Color Code
Color
Code
Color
Code
Black
B
White
W
Green
G
Yellow
Y
Red
R
Blue
S
Terminal Blocks
1. Used to mount contact blocks to operator (first pair only).
2. IDEC strongly recommends using the safety
lever lock (included) to prevent heavy vibration
or maintenance personnel from inadvertently unlocking
contacts.
Description
In place of j, specify the
Button Color Code from table
below.
Contactors
Operators
HW-CB2C
Part Number
Contact Block Mounting Adaptor
Style
Button
Timers
Dummy
Block
Style
+
Relays & Sockets
Safety Lever Lock
Contact Blocks
Style
+
Circuit Breakers
1904032200
800-262-IDEC (4332) • USA & Canada
673
Switches & Pilot Devices
Relays & Sockets
Signaling Lights
Switches & Pilot Devices
ø22mm - HW Series
Dual Pushbutton Switches
Key features:
• Two pushbuttons and a pilot light are integrated into one spacesaving ø22 mm control unit.
• Momentary and interlock types are available for pushbuttons. Interlock type prevents both buttons from being pressed at the same time.
• Pilot lights are available in full voltage and transformer with LED.
• IP40 protection, IP65 when using silicon boot.
Applications:
• Ideal for use as power switches and start/stop switches (available
with I/ON and O/OFF markings on the buttons and a pilot light in the
center).
• Interlock type prevents two pushbuttons from being pressed at the
same time.
Dual Pushbutton Switches (Assembled) Part Numbers
Without Center Pilot Light
Timers
Operation
Type
Button Style
Flush (top)
Flush (bottom)
Momentary
Contactors
Flush (top)
Extended (bottom)
Circuit Breakers
Terminal Blocks
Flush (top)
Flush (bottom)
Interlock*
Flush (top)
Extended (bottom)
Contact Arrangement
Part Number
Top Button
Bottom Button
1NO
1NC
HW7D-B11F1001-mn
1NO
1NO
HW7D-B11F1010-mn
1NO-1NC
1NO-1NC
HW7D-B11F1111-mn
2NO
2NC
HW7D-B11F2002-mn
2NO
2NO
HW7D-B11F2020-mn
1NO
1NC
HW7D-B12F1001-mn
1NO
1NO
HW7D-B12F1010-mn
1NO-1NC
1NO-1NC
HW7D-B12F1111-mn
2NO
2NC
HW7D-B12F2002-mn
2NO
2NO
HW7D-B12F2020-mn
1NO
1NC
HW7D-B21F1001-mn
1NO
1NO
HW7D-B21F1010-mn
1NO-1NC
1NO-1NC
HW7D-B21F1111-mn
2NO
2NC
HW7D-B21F2002-mn
2NO
2NO
HW7D-B21F2020-mn
1NO
1NC
HW7D-B22F1001-mn
1NO
1NO
HW7D-B22F1010-mn
1NO-1NC
1NO-1NC
HW7D-B22F1111-mn
2NO
2NC
HW7D-B22F2002-mn
2NO
2NO
HW7D-B22F2020-mn
mButton Color
Code
GR:
Green (top)
Red (bottom)
WB:
White (top)
Black (bottom)
nLegend Code
Blank:
Without legend
1:
I/ON (top)
O/OFF (bottom)
1. *Interlock type prevents both top and bottom buttons from being pressed simultaneously.
2. Clear silicon rubber cover part number HW9Z-D7D.
3. Additional contact configurations available (up to 6 total contacts).
674
www.IDEC.com
1904032200
Switches & Pilot Devices
ø22mm - HW Series
Switches & Pilot Devices
With Center Pilot Light
Operation
Type
Button Style
Flush (Top)
Flush (Bottom)
Flush (top)
Flush (bottom)
Momentary
Flush (top)
Extended (bottom)
Interlock*
Flush (Top)
Extended (Bottom)
Part Number
1NO
1NC
HW7D-L11F1001kl-mn
1NO
1NO
HW7D-L11F1010kl-mn
1NO-1NC
1NO-1NC
HW7D-L11F1111kl-mn
2NO
2NC
HW7D-L11F2002kl-mn
2NO
2NO
HW7D-L11F2020kl-mn
1NO
1NC
HW7D-L12F1001kl-mn
1NO
1NO
HW7D-L12F1010kl-mn
1NO-1NC
1NO-1NC
HW7D-L12F1111kl-mn
2NO
2NC
HW7D-L12F2002kl-mn
2NO
2NO
HW7D-L12F2020kl-mn
1NO
1NC
HW7D-L21F1001kl-mn
1NO
1NO
HW7D-L21F1010kl-mn
1NO-1NC
1NO-1NC
HW7D-L21F1111kl-mn
2NO
2NC
HW7D-L21F2002kl-mn
2NO
2NO
HW7D-L21F2020kl-mn
1NO
1NC
HW7D-L22F1001kl-mn
1NO
1NO
HW7D-L22F1010kl-mn
1NO-1NC
1NO-1NC
HW7D-L22F1111kl-mn
2NO
2NC
HW7D-L22F2002kl-mn
2NO
2NO
HW7D-L22F2020kl-mn
Relays & Sockets
Flush (Top)
Flush (Bottom)
Bottom Button
Signaling Lights
Flush (Top)
Extended (Bottom)
Top Button
kPilot Light Illumination
& Voltage Code
Full Voltage
l Pilot Lamp Color Code
Timers
1. *Interlock type prevents both top and bottom buttons from being pressed simultaneously.
2. Clear silicon rubber cover part number HW9Z-D7D.
3. All assembled part numbers in catalog include Finger-Safe spring-up (HW-U...) contacts.
mPushbutton Color Code
Color
Code
Color
Code
A
Top
Green
Code
Green
G
Bottom
Red
6V AC/DC, LED
Q2
Red
R
Top
White
12V AC/DC, LED
Q3
Blue
S
Bottom
Black
24V AC/DC, LED
Q4
White
W
120V AC, LED
Q8
GR
WB
Engraving
Code
No Engraving
Blank
I/ON
Top
O/OFF
Bottom
1
Contactors
Amber
Voltage
nEngraving Codes
Step-Down Transformer
(6V Secondary LED Voltage)
Code
120V AC, LED
H22
240V AC, LED
M42
480V AC, LED
T82
Terminal Blocks
Voltage
Circuit Breakers
1904032200
800-262-IDEC (4332) • USA & Canada
675
Switches & Pilot Devices
H
Pilot Light
Part Number Structure
– L 21 F 20 20 H22 R – GR 1
Note: Use only for interpreting part numbers.
Do not use for developing part numbers.
Contact Blocks
+
Voltage Code
Mounting Adaptor
Part Number
Description
For use with HW-CBL
on all illuminated
pushbutton units.
One required for
each deck (pair) of
contacts.
Lead Holder
Dummy Block
with Full Voltage
Adaptor
For use with odd
number of contacts.
Full Voltage
Adaptor
For use with even
number of contacts.
+
Safety Lever
Lock
120VAC
240VAC
480VAC
Button
Operator
Style
HW-LH3
+
Lens
Momentary
Flush (top)
Extended (bottom)
Interlock
Flush (top)
Flush (bottom)
Flush (top)
Extended (bottom)
TW-DA1FB
1NC
FingerSafe
Spring-Up
Terminal
HW-U10-F
HW-U01-F
HW-U10R-F
(early make)
HW-U01R-F
(late break)
HW-DB
Code
Top
Green
Bottom
Red
GR
676
Non-illuminated
HW-CB2C
Illuminated (with
Pilot Light)
HW-CBL
1. Used to mount contact blocks to operator (first
pair only).
2. IDEC strongly recommends using the safety
lever lock (included) to prevent heavy vibration
or maintenance personnel from inadvertently
unlocking contacts.
Style
Instead of * insert:
B: Non-illuminated
L: Illuminated
Code
White
Bottom
Black
WB
Style
Voltage
Part Number
6V AC/DC
LSTD-6k
12V AC/DC
LSTD-1k
24V AC/DC
LSTD-2k
120V AC
LSTD-H2k
240V AC
LSTD-M4k
Nonilluminated
HW9Z-B7B
Illuminated
HW9Z-L7W
1. In place of k, specify the LED Color Code.
2. The LED contains a current-limiting
resistor and reverse polarity protection
diodes.
HW9Z-LS
Anti-Rotation Ring
Appearance
kLED Color Code
Part Number
HW9Z-RL
Top
Lamps/Lens
Part Number
HW7D-*22m-n
Color
Contact Arrangement Chart
Part Number
Safety Lever Lock
HW7D-*11m-n
HW7D-*21m-n
Completed Unit
1NO
Style
mPushbutton Color Code
Color
GR: Top: Green
Bottom: Red
WB: Top: White
Bottom: Black
HW-DA1FBN
TW-F126B
TW-F246B
TW-F486B
HW7D-*12m-n
=
Contacts
Dummy
Block
Part Number
Flush (bottom)
Pushbutton Color
Contact Blocks
Operators
Flush (top)
Circuit Breakers
+
Contact Block Mounting Adaptor
Style
Y: Yellow
blank: without center
pilot light
blank: No Engraving
1: Top: I/ON
Bottom: O/OFF
Dual Pushbutton Switches (Sub-assembled) Part Numbers
Lamp Circuit Components with Finger-Safe Terminals
Style
Pilot Lamp Color
A: Amber
blank: without center pilot light
G: Green
Full Voltage*
Transformer*
Q2: 6V LED
H22: 120V AC LED R: Red
S: Blue
*For additional voltage codes, please see previous page
W: White
02: 2NC
20: 2NO
Momentary (Flush/Flush)
Momentary (Flush/Extended) Bottom Button
01: 1NC
02: 2NC
Interlock (Flush/Flush)
10: 1NO
20: 2NO
Interlock (Flush/Extended)
Signaling Lights
Relays & Sockets
Timers
01: 1NC
10: 1NO
Transformer Unit
(6V secondary
voltage)
Contactors
D
Contact Arrangement
Top Button
Button Arrangement
Terminal Blocks
7
Engraving Code
B: Without Center Pilot Light
L: With Center Pilot Light
11:
12:
21:
22:
W
LED
Switches & Pilot Devices
ø22mm - HW Series
Use with notched panel cutout to prevent
unit rotation.
Color
Code
Color
Code
Amber
A
Blue
S
Green
G
White
W
Red
R
nEngraving Codes
Engraving
Code
No Engraving
I/ON
Top
O/OFF
Bottom
Blank
1
www.IDEC.com
Contact Block Mounting Position Example
1904032200
Switches & Pilot Devices
1NO
1NO
1010
1NO
1NC
1001
1NC
1NO
0110
1NC
1NO
2NO
1NO-1NC
1NO
2NC
1NC
2NO
1NO-1NC
1NC
2NC
1NO
1NC
1NO-1NC
1NC
0111
0102
2010
2001
1110
1101
NO
2
NC
1
NC
2
NO
1
NC
2
NC
1
NO
2
NO
3
Dummy
4
NO
1
NO
2
NO
3
Dummy
4
NC
1
NO
2
NC
3
Dummy
4
NC
1
NC
2
NO
3
Dummy
4
NO
1
NC
2
NO
3
Dummy
4
NC
1
NC
2
NC
3
Dummy
4
NC
1
NO
2
NO
3
NO
4
Dummy
1
NO
2
NC
3
NO
4
Dummy
1
NO
2
NO
3
NC
4
Dummy
1
NO
2
NC
3
NC
4
Dummy
X
X
X
Mounting Position 3
Mounting Position 1
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Circuit Breakers
1NO-1NC
1NO
0120
1
Mounting Position 4
Mounting Position 2
Push
Terminal Blocks
2NO
1002
NO
Bottom Button
Normal
Contactors
2NO
1011
NO
2
Push
Timers
1NC
1020
1
Normal
Relays & Sockets
1NO
0101
Top Button
Type
Signaling Lights
1NC
Contact Block
Mounting Position
X
1. Transformers can have two or four contact blocks only.
2. Contact blocks 1 and 3 are actuated by the top button. Contact blocks 2 and 4 are actuated by the bottom button.
1904032200
Switches & Pilot Devices
Contact Arrangement
Top Button Bottom Button Contact Code
ø22mm - HW Series
800-262-IDEC (4332) • USA & Canada
677
Switches & Pilot Devices
Signaling Lights
Switches & Pilot Devices
ø22mm - HW Series
Contact Arrangement
Top Button
2NC
2NC
Relays & Sockets
2NO
2NO
Timers
2NO
1NO-1NC
Contactors
1NO-1NC
1NO-1NC
2NC
Terminal Blocks
Contact Block Mounting Position Example
Contact Arrangement Chart (con’t)
2NC
Circuit Breakers
2NC
678
Bottom
Button
1NO
1NC
2NO
1NO-1NC
2NC
2NO
1NO-1NC
2NC
2NO
1NO-1NC
2NC
Contact
Code
0210
0201
2020
2011
2002
1120
1111
1102
0220
0211
0202
Contact Block
Mounting
Position
Top Button
Type
Normal
1
NC
X
2
NO
3
NC
4
Dummy
1
NC
2
NC
3
NC
4
Dummy
1
NO
2
NO
3
NO
4
NO
1
NO
2
NO
3
NO
4
NC
1
NO
2
NC
3
NO
4
NC
1
NO
2
NO
3
NC
4
NO
1
NO
2
NO
3
NC
4
NC
1
NO
2
NC
3
NC
4
NC
1
NC
2
NO
3
NC
4
NO
1
NC
2
NO
3
NC
4
NC
1
NC
2
NC
3
NC
4
NC
Bottom Button
Push
Normal
Mounting Position 4
Mounting Position 2
Push
X
X
Mounting Position 3
Mounting Position 1
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
www.IDEC.com
1904032200
Switches & Pilot Devices
ø22mm - HW Series
Switches & Pilot Devices
Contactor Reset Button
Signaling Lights
Reset Buttons (Assembled)
j Button Color Code
Metal Bezel
(Blank)
HW1B-M1RS-jT
HW4B-M1RS-jT
Color
Code
Color
Code
Engraved “R”
HW1B-M1RS-jT-ENG-R
HW4B-M1RS-jT-ENG-R
Black
B
White
W
Green
G
Yellow
Y
Red
R
Blue
S
1. In place of j specify Button Color Code.
2. 130mm (5.1”) overall length.
3. 16mm flat base for easy alignment
Relays & Sockets
Plastic Bezel
Contactor Reset Button (Sub-assembled)
Rod
+
Operator
+
Button
=
Completed Unit
Timers
Rod
Button
Style
Part Number
Style
Part Number
HW1A-B1-j
Operator
Style
Plastic
Contactors
HW9Z-RS-TK2141
Metal
In place of j, specify the Button
Color Code from table.
j Button Color Code
HW4B-MO
Code
Color
Code
Black
B
White
W
Green
G
Yellow
Y
Red
R
Blue
S
Terminal Blocks
HW1B-MO
Color
Circuit Breakers
1904032200
800-262-IDEC (4332) • USA & Canada
679
Switches & Pilot Devices
Switches & Pilot Devices
ø22mm - HW Series
Nameplates - HW Series
Engraving Plate
1.6
0.9
12.1
30
R14.9
ø22
1
45
2.7
HWAV–Yellow Plastic
22mm
ø22
1.9
1
Nameplate (blank
engraving plate
included)
HWAM-OB
HWAQ-OB
HWAS-OB
HWAV-O
HWAV5-0†
Nameplate
(engraved)
HWAM-j
HWAQ-j
HWAS-j
HWAV-27*
HWAV5-27†
Additional Insert
(blank)
HWNP-O
HWNP-O
HWNP Dimensions
Additional Insert
(engraved)
HWNP-j
HWNP-j
12
Signaling Lights
1.5
HWAS–Black Plastic
27
14.5 14.9
2
29
2.7
14.5 14.9
R14.9
ø2
Relays & Sockets
Engraving Plate
12.1
30
29
27
HWAQ–Black Plastic
ø60mm
HWAM–Black Plastic
27
1. In place of j, insert either the standard legend code from table below or custom engraving delimited by “ “.
2. Standard engravings are available at no charge.
3. * HWAV-27 comes engraved “Emergency Stop” as shown in drawing.
4. † HWAV5-27 and HWAV5-0 for 60mm diameter E-Stops (80mm diameter nameplate).
Standard Legend Codes
Pushbuttons/Selector Switches
Selector Switches
Legend
Code
Legend
Code
Legend
Code
Legend
Code
Legend
Code
AUTO
CLOSE
DOWN
EMERG.STOP
FAST
FORWARD
HAND
HIGH
IN
INCH
JOG
LOW
LOWER
OFF
ON
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
OPEN
OUT
RAISE
RESET
REVERSE
RUN
SLOW
START
STOP
TEST
UP
I (Int’l On)
O (Int’l Off)
EMO
116
117
118
119
120
121
122
123
125
126
127
150
151
152
AUTO-MAN
CLOSE-OPEN
DOWN-UP
FAST-SLOW
FOR-REV
HAND-AUTO
HIGH-LOW
JOG-RUN
LEFT-RIGHT
LOWER-RAISE
MAN-AUTO
OFF-ON
ON-OFF
OPEN-CLOSE
RAISE-LOWER
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
REV-FOR
RUN-JOG
RUN-SAFE
SAFE-RUN
SLOW-FAST
START-STOP
STOP-START
UP-DOWN
OI (Int’l OFF ON)
216
217
218
219
220
221
222
223
250
AUTO-MAN-OFF
AUTO-OFF-MAN
CLOSE-OFF-OPEN
DOWN-OFF-SLOW
FAST-OFF-SLOW
FOR-OFF-REV
LEFT-OFF-RIGHT
LOWER-OFF-RAISE
OFF-MAN-AUTO
OFF-SLOW-FAST
OFF-1-2
OPEN-OFF-CLOSE
SLOW-OFF-FAST
SUMMER-OFF-WINTER
UP-OFF-DOWN
1-OFF-2
HAND-OFF-AUTO
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
1. To order engraved nameplates, add legend code to nameplate part number.
2. Character height based on the number of characters and size of nameplate. Standard character size is 3/16”.
3. Nameplates with standard legends are the same list price as blank nameplates.
4. Nameplates have built-in anti-rotation feature for use with notched panel cut-outs. Additional anti-rotation ring (HW9Z-RL) is not necessary.
Circuit Breakers
Terminal Blocks
Contactors
Timers
Pushbuttons
680
www.IDEC.com
1904032200
Switches & Pilot Devices
ø22mm - HW Series
Switches & Pilot Devices
Nameplates Order Form — HW Series
Copy this order form and use it to specify Letter Height, Custom Engravings, Location of Engraving on Nameplate, and Quantity Desired.
To ensure engraving accuracy, fax it to your IDEC representative or Distributor.
IDEC Rep/Distributor Contact:
Name:
PO number (if known):
Telephone:
IDEC Rep/Distributor Phone:
Fax & Email:
IDEC Rep/Distributor Fax & Email:
Signaling Lights
Your Company:
HWAM Nameplate
Engraving
Location
Step 2.
Specify Quantity.
Enter the number of nameplates
desired in the box on the right.
7/64”
Letter
Size
11 characters maximum
(for 7/64” size letters)
1/8”
Letter
Size
9 characters maximum
(for 7/8” size letters)
Relays & Sockets
Step 1.
Choose Letter Size - 7/64” or 1/8”.
Check the box for the letter size you want.
Then write your lettering in box below the
check boxes. Note: 1/8” size letters cannot
exceed 9 characters.
Sample Letter Sizes
Qty
1
2
3
4
5
6
7
8
9 10 11
7/64” Letters:
ABCD
1/8” Letters: A
BCD
HWAQ Nameplate
11 characters maximum
(for 7/64” size letters)
1/8”
Letter
Size
9 characters maximum
(for 1/8” size letters)
Sample Letter Sizes
Qty
1
2
3
4
5
6
7
8
9 10 11
7/64” Letters:
ABCD
1/8” Letters: A
BCD
Contactors
Step 2.
Specify Quantity.
Enter the number of nameplates
desired in the box on the right.
7/64”
Letter
Size
Timers
Engraving
Location
Step 1.
Choose Letter Size - 7/64” or 1/8”.
Check the box for the letter size you want.
Then write your lettering in box below the
check boxes. Note: 1/8” size letters cannot
exceed 9 characters.
HWAS Nameplate
Engraving Location A
Step 2.
Specify Quantity.
Enter the number of nameplates
desired in the box on the right.
Qty
20 characters maximum
(for 3/32” size letters)
1/8”
Letter
Size
14 characters maximum
(for 1/8” size letters)
A
1
2
3
4
5
6
7
8
9 10 11 12 13 14 15 16 17 18 19 20
B
1
2
3
4
5
6
7
8
9 10 11 12 13 14 15 16 17 18 19 20
Circuit Breakers
Step 3.
Specify Location.
Enter the location of engraving Location
(A or B or Both), in box on the right.
3/32”
Letter
Size
Terminal Blocks
Engraving Location B
Step 1.
Choose Letter Size - 3/32” or 1/8”.
Check the box for the letter size you want.
Then write your lettering in box below the
check boxes. Note: 1/8” size letters cannot
exceed 14 characters.
Sample Letter Sizes
3/32” Letters: A B C D
1/8” Letters: A
1904032200
800-262-IDEC (4332) • USA & Canada
BCD
681
Switches & Pilot Devices
Signaling Lights
Switches & Pilot Devices
ø22mm - HW Series
Switch Engraving Order Form – HW Series
Copy this order form and use it to specify Letter Height, Maximum Number of Lines and Text to be engraved.
To ensure engraving accuracy, fax it to your IDEC representative or Distributor.
Your Company:
Telephone:
Name:
Fax:
Address:
Email:
PO:
Part Number to be Engraved:
Please check one of the boxes below to indicate your choice of engraving options:
ø29mm, ø40mm Mushroom Head
Relays & Sockets
Engraving
# of Lines
Letter
Height
Max. Characters
Per Line
5/32
5
Timers
1
Contactors
Engraving
Area 1
Round
Switch
Square
Switch
# of
Lines
Area 2†
Letter
Height
Max. Characters
Per Line
5/32
5
1
1/8
6
5/32
5
2
1/8
5
5/32
5
2
1/8
6
3
1/8
6
4
3/32
5
1/8
6
3
1/8
5
4
3/32
5
Engraving
Area 1
1
Engraving
Area 2
1
Letter
Height
Max. Characters
Per Line
5/32
5
1/8
5
5/32
7
1/8
7
1. Above mentioned specifications hold true for standard size pushbuttons (round and square).
2. †Engraving Area 2 can be engraved for 40mm mushroom Head non-Illuminated push button only.
3. Engraving is done on the button itself for non-Illuminated push buttons and on marking plate for illuminated push buttons and pilot lights.
4. Please enter text exactly how you want it engraved, take care to emphasize capital or small letters.
Enter text to be engraved: Sample Letter Sizes
1/8 Letters:
Line 1:
5/32 Letters:
Line 2:
Terminal Blocks
# of
Lines
Line 3:
Line 4:
Circuit Breakers
For IDEC Internal Use Only:
Work Order #:
682
www.IDEC.com
1904032200
Switches & Pilot Devices
ø22mm - HW Series
Switches & Pilot Devices
Accessories
Item
Appearance
Part Number
Locking Ring Wrench
Metallic tool used to tighten the plastic locking ring when installing the HW
series in a panel
MW9Z-T1
Lamp/LED Removal
Tool
Rubber tool makes lamp/LED removal easier.
OR-55
Anti-Rotation Ring
Prevents rotation of switches in panel. (included with all assembled
switches except pilot lights)
for notched panel
cutout (standard)
HW9Z-RL
for round panel cutout
LW9Z-L
Black rubber plug fills unused 7/8” mounting holes in panel.
OB-31
Metallic Mounting
Hole Plug
For plugging unused 7/8” mounting holes in the panel. Tighten the attached
locking ring to a torque of 12 kfg-cm maximum
Degree of protection: IP66
LW9Z-BM
Used to cover and protect pushbuttons
Flush Pushbuttons
OC-31
Operating temperature: –50 to +60°C
Extended Pushbuttons
OC-32
Pushbutton Clear
Boot
Padlock Cover
Plastic hinged padlockable cover to protect pushbuttons or selector
switches. (Not intended for E-Stops)
Relays & Sockets
Rubber Mounting
Hole Plug
Signaling Lights
Description/Usage
HW9Z-KL1
Degree of protection: IP65
Tab #250 (6.35 x 0.8mm): Single tab
Mounting Adaptor
Used to mount round HW series (except Jumbo
Mushroom, unibody, and square units) into a larger panel
cut-out. (includes both pieces)
TW-FA4
22 to 30mm
HW9Z-A30
22 to 25mm
HW9Z-A25
Timers
Tab Terminal Adapter
Used to prevent contact mounting lever from moving due to heavy vibration
or panel maintenance.
HW9Z-LS
Reset Rod for
Contactors Overload
5” rod used with HW1B-M0.
HW9Z-RS-TK2141
Replacement
Operator Washer
Provided with operator. Insert between bezel and locking ring.
HWM-WASHER
Replacement Locking
Ring
Plastic locking nut comes with all HW operators & assemblies.
Switch Cover
(Square)
Used only with round or square flush pushbuttons.
HW9Z-K1 (spring return)
HW9Z-K11 (maintained cover)
Replacement Keys
Pair of Keys (#231)
HW9Z-SKP
Replacement Lens
HW Illuminated Unibody Replacement Lens
HWLV-LENSR
HW9Z-LN
Optional (metal)
HW9Z-LNM
Circuit Breakers
800-262-IDEC (4332) • USA & Canada
Standard (plastic)
Terminal Blocks
1904032200
Contactors
Replacement Safety
Lever Lock
683
Switches & Pilot Devices
Timers
Relays & Sockets
Signaling Lights
Switches & Pilot Devices
ø22mm - HW Series
Item
Appearance
Description/Usage
Replacement Jumbo
Dome Lens
Part Number
HW1A-P5j
j = (A, G, R, S, W, Y))
Polycarbonate Replacement Lens
(If using yellow lens, use white LED.)
Replacement Jumbo
LED Diffusing Lens
HW9Z-PP5C
Replacement LED
Lamps for HW
Jumbo Dome
Replacement LED Lamp - applicable for jumbo pilot lights only
LSTDB-2j
j = (A, G, R, S, W)
Rubber Cover for
Dual Pushbuttons
Clear Silicon rubber cover
HW9Z-D7D
Barrier for Dual
Pushbuttons
Plastic barrier. Used when mounting the HW7 units on 30mm horizontal
centers, to prevent possible interconnections between adjoining terminals.
HW-VU1
Emergency stop nameplate sticker
HW9Z-EMO-NP-TK2120
E MO
EMO Sticker
1NC
Contact Blocks
(with side entry)
These contacts are applicable for wires terminated by ring, fork, terminals,
not recommended for bare wire connections.
These contacts are applicable for wires terminated by ring, fork, or ferule
terminals, and also bare wire connections.
Contact Blocks
(without side entry)
1NO
HW-U01
HW-U01-MAU
HW-U01R
HW-U01R-MAU
(with side entry)
HW-U10
HW-U10-MAU
HW-U10R
HW-U10R-MAU
(with side entry)
HW-U01-F
HW-U01-MAU-F
HW-U01R-F
HW-U01R-MAU-F
(no side entry)
HW-U10-F
HW-U10-MAU-F
HW-U10R-F
HW-U10R-MAU-F
(no side entry)
E-Stop Shrouds
E-Stop Types
Applicable
Standards
HW9Z-KG1
40mm
Mushroom Head
SEMI S2-0703,
12.5.1 Compliant
HW9Z-KG2
40mm
Mushroom Head
SEMI S2-0703, 12.5.1 &
SEMATECH Compliant
Part Numbers
Style
E-Stop Types
Applicable
Standards
HW9Z-KG3
40mm
Mushroom Head
SEMI S2 Compliant
(Approved by TUV)
ISO 13850
HW9Z-KG4
40mm
Mushroom Head
SEMI S2 Compliant
(Approved by TUV)
& SEMATECH
ISO 13850
Part Numbers
Circuit Breakers
Terminal Blocks
Contactors
Style
684
www.IDEC.com
1904032200
Switches & Pilot Devices
ø22mm - HW Series
Switches & Pilot Devices
Contact Assemblies
Standard Contact Assemblies
Full Voltage Contact Assemblies
For use with Non-Illuminated Pushbuttons & E-Stops
For use with Illuminated Pushbuttons.
Style
Contacts
Part Number
Standard Finger-Safe Contacts
1NO
1NC
1NO/1NC
2NO
2NC
2NO/2NC
HW-CBF10
HW-CBF01
HW-CBF11
HW-CBF20
HW-CBF02
HW-CBF22
Gold contact option is available. Add suffix “MAU” to end of part number. For
example, HW-CBF20 becomes HW-CBF20-MAU.
Contacts
Part Number
1NO
2NO
1NO/1NC
1NC
2NC
HW-FL10Q0
HW-FL20Q0
HW-FL11Q0
HW-FL01Q0
HW-FL02Q0
Order LED separately.
Signaling Lights
Style
Transfomer Contact Assemblies
For use with Illuminated Pushbuttons.
Style
Part Number
120V AC
with LED
1NO
2NO
1NC
1NO/1NC
HW-FL10H2-k
HW-FL20H2-k
HW-FL01H2-k
HW-FL11H2-k
240V AC
with LED
1NO
2NO
1NC
1NO/1NC
HW-FL10M4-k
HW-FL20M4-k
HW-FL01M4-k
HW-FL11M4-k
480V AC
with LED
1NO
2NO
1NC
1NO/1NC
HW-FL10T8-k
HW-FL20T8-k
HW-FL01T8-k
HW-FL11T8-k
Relays & Sockets
Contacts
2. 6V LED included.
Timers
1. In place of k, specify the LED Color Code.
k = A, G, R, S, or W
Dimensions (mm)
Non-Illuminated Pushbuttons
Flush (HW1B-M1, -A1)
Panel Thickness 0.8 to 6
Locking Ring
Safety Lever Lock
Panel Thickness 0.8 to 6
49.4 (1 block)
69.4 (2 or 3 blocks)
89.4 (4 blocks)
13
23.2
Locking Ring
Safety Lever Lock
LO
Panel Thickness 0.8 to 6
ø 29
41.4
LO
CK
Locking Ring
Safety Lever Lock
Panel Thickness
0.8 to 6
49.4 (1 block)
69.4 (2, 3 blocks)
89.4 (4 blocks)
13
29.4
CK
29.6
41.4
29.4
15
LO
26.5
25
26.5
25
ø60
41.4
26.5
25
ø 40
29.4
69.4 (3 or 4 blocks)
CK
Square Flush (HW2B-M1, -A1)
CK
49.4 (1 or 2 blocks)
LO
26.5
25
Panel Thickness
0.8 to 6
Terminal Blocks
41.4
29.6
19
ø60mm Mushroom (HW1B-M5)
Panel Thickness
0.8 to 6
13
23.2
Locking Ring
Safety Lever Lock
26.5
25
ø 23.6
29.4
13
69.4 (3 or 4 blocks)
ø40mm Mushroom (HW1B-M4, -A4)
49.4 (1 block)
69.4 (2 or 3 blocks)
89.4 (4 blocks)
CK
ø29
49.4 (1 or 2 blocks)
ø 23.6
29.4
13
Locking Ring
Safety Lever Lock
41.4
29.6
ø29
41.4
49.4 (1 or 2 blocks)
69.4 (3 or 4 blocks)
LO
CK
Contactors
LO
ø29mm Mushroom (HW1B-M3 -A3)
26.5
25
Locking Ring
Safety Lever Lock
Extended (HW1B-M2, -A2)
24.6
29.4
30.1
Circuit Breakers
1904032200
800-262-IDEC (4332) • USA & Canada
685
Switches & Pilot Devices
Square Extended (HW2B-M2, -A2)
Terminal Wiring
Arrows indicate access directions for wiring
Locking Ring
Safety Lever Lock
Panel Thickness 0.8 to 6
LO
CK
29.6
26.5
25
49.4 (1 or 2 blocks)
69.4 (3 or 4 blocks)
13
19
1 contact block
24.8
29.4
2 contact blocks
4 contact blocks
Operators
Dimensions (mm)
Flush (Round & Square)
Extended
Round
Panel Thickness
0.8 to 6
LO
Square
CK
LO
LO
CK
CK
Relays & Sockets
3.6
13
.6
23
ø
13
ø2
29.4
29.4
18.5
24.8
29.4
Extended with Full Shroud
ø40mm Mushroom
LO
LO
CK
Timers
18.5
41.4
3.6
ø40
41.4
ø29.5
25
25
CK
ø2
Extended
41.4
ø23.5
41.4
29.6
41.4
25
25
25
Signaling Lights
Contact Block (Bottom View)
41.4
Switches & Pilot Devices
ø22mm - HW Series
29.4
13
29.4
23.2
Emergency Stop Pushbuttons
Dimensions (mm)
ø29mm Head Pushlock Turn Reset (HW1B-V3)
Panel Thickness 0.8 to 6
Gasket
Terminal Screw M3.5
LOC
K
ø29
41.4
25
Contactors
Locking Ring
50.2 (1 or 2 blocks)
70.2 (4 blocks)
29.4
32
ø40mm Head EMO Pushlock Turn Reset (HW1B-V4)
LO
LOC
K
Locking Ring
26.5
CK
Lock Lever
0
ø4
20
41.4
ø40
Circuit Breakers
50.2 (1 or 2 blocks)
13
41.4
ø40mm Head Pushlock Turn Reset (HW1B-V4)
13
25
2 contact blocks
4 contact blocks
25
Terminal Blocks
1 contact block
29.4
70.2 (4 blocks)
13
32
29.4
32
686
www.IDEC.com
1904032200
Switches & Pilot Devices
Switches & Pilot Devices
ø40mm Head Pushlock Key Reset (HW1B-X4)
ø22mm - HW Series
ø60mm Head Pushlock Turn Reset (HW1B-V5)
LO
ø60
41.4
ø40
25
CK
13
29.4
32
15
Signaling Lights
34.5
49.4
ø40mm Head Push-Pull (HW1B-Y2)
ø40mm Head Unibody Pushlock Turn Reset (HW1B-BV4)
LO
Panel Thickness 0.8 to 6
CK
Gasket
M3.5 Terminal Screw
Relays & Sockets
ø40
ø40
41.4
25
Locking Ring
13
29.4
25.5
TOP Marking
Terminal Cover
11.5
46
14
32
48
Illuminated E-Stop Pushbuttons (HW1E-LV4)
Mounting Hole
Panel Thickness 0.8 to 6
R0.8 max.
3.2
ø22
.3
Locking Ring
+0.4
0
ø40
24.1
TOP Marking
+0.2
0
+0.4
0
Gasket
M3.5 Terminal Screw
Lamp Terminal
14
32
63
Unit
Vertical Spacing
Horizontal Spacing
HW1B-V3
HW1B-V4
HW1B-X4
HW1B-Y2
50 mm
50 mm
HW1B-V5
60 mm
60 mm
Contactors
11.5
61
Terminal Cover
The minimum mounting centers shown
below are applicable to E-Stop switches
with one layer of contact blocks (two
contact blocks). When two layers of
contact blocks are mounted, determine
the minimum mounting centers for ease
of wiring.
Timers
M3.5 Terminal Screw
Terminal Arrangement (Bottom View)
HW1E-BV4
Side
HW1E-LV4
TOP
X1
.3 (NO)
.1 (NC)
.4 (NO)
(1NO-1NC)
LAMP
.2 (NC)
.3 (NO)
.1 (NC)
.4 (NO)
Terminal Blocks
.2 (NC)
X2
(1NO-1NC)
Circuit Breakers
1904032200
800-262-IDEC (4332) • USA & Canada
687
Switches & Pilot Devices
Emergency Stop Stations
Dimensions (mm)
A
76
59.5
Mounting Hole Layout
Operator
Dimension A (mm)
Pushlock Turn Reset
32
Pushlock Key Reset
32 (Key inserted: 49.4)
Push Pull
25.5
4-M4 Tapped Holes for Rear Mounting
(Depth: 10 mm)
2-Front Mounting Holes
ø14 Knockout
21
76
Switches & Pilot Devices
ø22mm - HW Series
Signaling Lights
21
41
HW1B-V4R
Box Cover Mouting Screws
Box Cover
Box Base
2-
ø4
15.5
.6
62
Pilot Lights
Dimensions (mm)
Round Flush Terminal screws: M3.5, integrated terminal cover
ø2
24
24
3.5
ø2
3.5
9
ø2
Panel Thickness 0.8 to 6
Gasket
Locking Ring
Panel Thickness 0.8 to 6
Gasket
Locking Ring
ø2
9
Panel Thickness 0.8 to 6
Gasket
Locking Ring
110V DC, 380V AC minumum
9
100/110V AC, 200/220V AC (240V AC maximum)
ø2
Relays & Sockets
6, 12, 24V AC/DC, Without LED lamp
ø2
3.5
11.5
43.3
60.8
7
7
76.2
29.6
7
29.6
Extended Terminal screws: M3.5, integrated terminal cover
3.
Panel Thickness 0.8 to 6
Gasket
Locking Ring
9
6
11.5
43.3
60.8
17.5
17.5
24
24
ø
9
ø2
29
3.6
3.6
ø2
Gasket
Locking Ring
ø2
110V DC, 380V AC minimum
Panel Thickness 0.8 to 6
ø2
Gasket
Locking Ring
Timers
100/110V AC, 200/220V AC (240V AC maximum)
Panel Thickness 0.8 to 6
ø2
6, 12, 24V AC/DC, Without LED lamp
29.6
76.2
17.5
29.6
6, 12, 24V AC/DC, Without LED lamp
100/110V AC, 200/220V AC (240V AC maximum)
Panel Thickness 0.8 to 6
Panel Thickness 0.8 to 6
Gasket
Locking Ring
11.5
7
Jumbo Dome Pilot Light
terminal cover
29.6
Panel Thickness 0.8 to 6
Gasket
Locking Ring
24.6
60.8
7
76.2
29.6
7
29.6
Terminal screws: M3.5, integrated
LED Lamp LSTDB
Panel Thickness 1 to 5
Base BA9S/13
Illumination Color
Mounting Hole Layout
R0.8 max.
ø22.3
+0.4
0
3.2
+0.2
0
Mounting Hole Layout
Close mounting on 30mm centers
Degree of protection: IP65
.3
ø22
24.1
ø10.6
Light blue:
LSTDB
+0.4
0
Terminal Blocks
43.3
110V DC, 380V AC minimum
24.6
Gasket
Locking Ring
24.6
Contactors
Square Flush Terminal screws: M3.5, integrated terminal cover
+0.4
0
30 min.
Circuit Breakers
85
20.4
Locking
Ring
6
ø6
Gasket
34.4
0.5
85
50.5
30 min.
When mounting transformer or DC-DC
converter type units on 30mm centers
vertically and horizontally, keep the
ambient temperature below 40ºC.
688
www.IDEC.com
1904032200
Switches & Pilot Devices
ø22mm - HW Series
Switches & Pilot Devices
Illuminated Pushbuttons
Full Voltage Models
1 Contact Block
2 Contact Blocks
3 Contact Blocks
Full Voltage Adapter
Full Voltage Adapter
M3.5 Terminal Screw
Contact Block
Locking Ring
M3.5 Terminal Screw
Contact Block
Locking Ring
Panel
Thickness
0.8 to 6
Full Voltage Adapter
M3.5 Terminal Screw
Contact Block
Panel
Thickness
0.8 to 6
Panel
Thickness
0.8 to 6
Locking Ring
Signaling Lights
X1
X2
50.2 (1 block)
1 contact block
65.8 (2 blocks)
2 contact blocks
3 contact blocks
Dimensions (mm)
4 Contact Blocks
Terminal Wiring
Arrows indicate access directions for wiring.
Full Voltage Adapter
Contact Block
Full Voltage Adaptor
M3.5 Terminal Screw
Contact Block
Locking Ring
Transformer
Panel
Thickness
0.8 to 6
X1
X2
Timers
85.8 (4 contacts)
4 contact blocks
Relays & Sockets
Illuminated Pushbuttons con’t
70.2 (3 blocks)
Transformer Models
DC-DC Converter Models
Safety Lever Lock
3
X1
Locking Ring
4
X2
X2
M3.5 Terminal Screws
89.7 (2 blocks)
109.5 (4 blocks)
Contactors
X1
M3.5 Terminal Screw
89.5 (2 blocks)
109.5 (4 blocks)
Terminal Blocks
Circuit Breakers
1904032200
800-262-IDEC (4332) • USA & Canada
689
Switches & Pilot Devices
Non-Illuminated Selector & Key Switches
Dimensions (mm)
Knob Operator
Terminal Wiring
Locking Ring
Safety Lever Lock
Panel Thickness
0.8 to 6
49.4 (1 block)
69.4 (2-3 blocks)
89.4 (4 blocks)
7
45°
Arrows indicate access directions
for wiring.
(2-position
90° maintained)
(3-position)
LO
45°
Contact Block
Full Voltage Adaptor
CK
Signaling Lights
1 contact block
ø29
41.4
26.5
25
Switches & Pilot Devices
ø22mm - HW Series
2 contact blocks
4 contact blocks
29.4
21
Key Operator
Tranformer
LO
9.4
ø2
25
Relays & Sockets
CK
17
41.4
X1
X2
13
29.4
30.5
Illuminated Selector Switches
Full Voltage Model
Transformer Model
45°
LO
(2-position
Locking Ring
Safety Lever Lock
45°
CK
90° maintained)
Panel Thickness
0.8 to 6
ø 29
41.4
26.5
25
ø 29
X2
25
X1
25
41.4
21
45°
CK
79.5 (2 blocks), 99.5 (4 blocks)
29.4
7
21
29.6
Circuit Breakers
Terminal Blocks
Contactors
7
LO
25
4
49.4 (1 block)
69.4 (2-3 blocks)
89.4 (4 blocks)
45°
(3-position)
26.5
Timers
Panel Thickness
0.8 to 6
(3-position)
3
Locking Ring
Safety Lever Lock
(2-position
90° maintained)
690
www.IDEC.com
1904032200
Switches & Pilot Devices
ø22mm - HW Series
Dimensions (mm)
Without Pilot Light
Mounting Hole Layout
ø22
*3.2
+0.
4
0
+0.2
0
24.1
.3
+0.4
0
HW
R0.8 max.
49.4 (2 contacts)
69.4 (3 or 4 contacts)
55 **
18.7
18.7
18.7
54.8
54.8
41.4
14.5
20
24.6
29.8
24.6
29.8
With Pilot Light
Full Voltage
Full Voltage Adapter
HW
The depth of a 3-contact model depends on the combination of
contact blocks at top and bottom pushbuttons.
(Bottom Button)
(Top Button)
1 contact block
2 contact blocks
Bottom Button
2 contact blocks
1 contact block
Depth
89.4 mm
69.4 mm
Timers
Top Button
-The 3.2 mm recess is for preventing
rotation and is not necessary when a
nameplate or anti-rotation ring is not used.
-When using the safety lever lock,
determine the vertical spacing in
consideration of convenience for installing
and removing the safety lever lock.
-Recommended vertical spacing: 100 mm
-The minimum mounting centers are
applicable to switches with one layer of
contact blocks (two contact blocks). When
two layers of contact blocks are mounted,
determine the minimum mounting centers
for ease of wiring.
Relays & Sockets
49.4 (1 or 2 blocks)
69.4 (3 or 4 blocks)
30
18.7
Panel Thickness
0.8 to 6
Signaling Lights
Locking Ring
Safety Lever Lock
69.4 (2 contacts), 89.4 (4 contacts)
(Note)
Transfomer (240V minimum)
Switches & Pilot Devices
Dual Pushbutton
Transformer (480V)
Transformer
Transformer, DC-DC Converter
HW
HW
Contactors
89.5 (2 contacts), 109.5 (4 contacts)
79.5 (2 contacts), 99.5 (4 contacts)
Monolever
Dimensions
All dimensions in mm.
Interlocking Lever
Locking Ring
Safety Lever Lock
LO
Panel Thickness
0.8 to 6
36 max.
CK
72
24 °
49.4 (1-2 blocks)
69.4 (3-4 blocks)
Terminal Screws M3.5
800-262-IDEC (4332) • USA & Canada
36 max.
41.4
24°
29.4
ø30
29.4
ø34.2
72
Circuit Breakers
69.4 (3-4 blocks)
36 max.
41.4
49.4 (1-2 blocks)
1904032200
LO
24 °
24°
36 max.
CK
26.5
25
Panel Thickness
0.8 to 6
26.5
25
Locking Ring
Safety Lever Lock
Terminal Blocks
Standard Lever
Integrated Terminal Cover
691
Switches & Pilot Devices
Accessory Dimensions
TOP
1.5
ø29
ø22
3.5
3.5
HW9Z-D7D
Dual Pushbutton Rubber Cover
ø25
HW-VU1
Dual Pushbutton Barrier
MW9Z-T1
Locking Ring Wrench
22.5
HW-VL1
Barrier
8
ø2
110
45
45
33
59
58
Signaling Lights
OR-55
Lamp/LED Removal Tool
ø11.6
Gasket
Locking Ring
HW9Z-RL
Anti-Rotation Ring
ø29
3
ø25.8
OB-31
Rubber Mounting Hole Plug
ø14
LW9Z-BM
Metallic Mounting Hole Plug
12
Switches & Pilot Devices
ø22mm - HW Series
20
HWLS-TK1971
Safety Lever Lock
Safety Lever Lock
Panel Thickness
0.8 to 3.2
82.5
Screwdriver
Remove
Operator
6.5
ø2
2.2
29.5
30
Key Hole ø8
Waterproof Rubber
Gasket 0.5t
HW9Z-KG1
Contact Block
Mounting Adapter
Panel
HW9Z-KG2
38
22
36.5
2.2
ø2
80
32
64
48
ø76.1
Timers
Safety Lever
Lock
CK
LO
26.5
70
30
93
Lock Lever
24
0
ø5 .4)
44
:ø
(ID
Contactors
1.5
Install
HW9Z-KL1
Padlock Cover
1.5
R6
Relays & Sockets
20
ø22
ø90
Gasket
TOP Marking
TOP Marking
Locking Ring
TOP Marking
TOP Marking
Locking Ring
Operator
Panel Thickness: 1.2 to 4
Panel Thickness: 1.2 to 4
HW9Z-KG3
HW9Z-KG4
LSTD
35
25
ø2
35
25
2
ø9.5
50
692
www.IDEC.com
20.4
Circuit Breakers
42
ø10.6
ø90
67
ø75
ø74
52
ø22
ø66
Terminal Blocks
Operator
1904032200
Switches & Pilot Devices
ø22mm - HW Series
INDUCTIVE
INDUCTIVE
RESISTIVE
RESISTIVE
DC Voltages
DC Voltages
AC Voltages
AC Voltages
0.5
0.2
0.1
1
0.5
0.2
600V AC
0.1
12
600V AC
3
24
5 36
4
510 6
HW-U10-F
(NO)
HW1S-2T
HW1K-2*
HW1F-2
HW-U01-F
(NC)
HW-U10R-F
(NO-EM)
HW-U10-F
(NO)
HW-U10R-F
(NO-EM)
HW-U01R-F
(NC-LB)
0.2
0.1
12
Right
L
O
X
R
O
X
L
X
O
R
X
O
L
O
X
R
O
X
L
X
O
R
X
O
42
5 36
4
510 6
10
in A
Current inCurrent
A
Contact
Position
Left
3
Mounting
Position
HW-U10-F
(NO)
HW1S-3JT
HW1K-3J*
HW-U01-F
(NC)
HW-U10R-F
(NO-EM)
HW-U01R-F
(NC-LB)
Operator Position
Left
Center
Right
O
L
X
O
R
O
O
X
L
O
X
O
R
O
X
O
L
X
O
X
R
X
O
X
L
O
X
X
R
X
X
O
4 Position Selector Switches
Contact
Operator Position
Mounting
Position
Left
L
X
O
O
R
O
O
X
L
O
X
X
R
X
X
O
L
X
O
O
R
O
O
X
L
O
X
X
R
X
X
O
Center Right
HW-U10-F
(NO)
HW1S-4T
HW-U01-F
(NC)
HW-U10R-F
(NO-EM)
HW-U01R-F
(NC-LB)
Operator Position
Mounting
Position
1
2
3
4
L
X
O
O
O
R
O
O
O
X
L
O
O
X
O
R
O
X
O
O
L
X
X
O
X
R
X
O
X
X
L
O
X
X
X
R
X
X
X
O
Contactors
HW1S-3T
HW1K-3*
HW1F-3
HW-U01-F
(NC)
0.5
Conforming to IEC 947-5-1 Appendix C.
Utilization categories AC-15 and DC-13.
Operation rate: 1,800 op. hour
Load factor:
Inductive 0.4 ± 0.05
Resistive 0.9 ± 0.05
Conforming
IEC
947-5-1
Appendix
C.
Conforming
toTruth
IECto947-5-1
Appendix
C.
Operator
Tables
Utilization
categories
AC-15AC-15
and DC-13.
Utilization
categories
and DC-13.
3 Position
Selector
Operation
rate: 1,800
op.
hour
Operation
rate:
1,800
op.
hour Switches con’t
Load factor:
0.9 ± 0.05
Load factor:
0.9 ± 0.05
3 Position Selector Switches
Contact
1
600V AC
120V AC 120V AC
500V AC 500V AC
480V AC 480V AC
400V AC 400V AC
380V AC 380V AC
240V AC 240V AC
Timers
HW-U01R-F
(NC-LB)
0.2
1.0
Relays & Sockets
Mounting
Position
0.5
0.1
10
in A
Current inCurrent
A
Conforming
IEC 947-5-1
Appendix
C.
Conforming
to IECto947-5-1
Appendix
C.
Utilization
categories
AC-15AC-15
and DC-13.
Utilization
categories
and DC-13.
2 Operation
Position
Selector
Switches
Operation
rate: 1,800
op. hour
rate: 1,800
op. hour
Load factor:
0.4 ± 0.05
Load factor:
0.4 ± 0.05
Operator
Contact
600V AC
1.0
110
2.2
Signaling Lights
Millions of Operating Cycles
120V AC 120V AC
1.0 500V AC
1.0 500V AC
480V AC 480V AC
400V AC 400V AC
380V AC 380V AC
240V AC 240V AC
VoltageVoltage
V 24 V 4824 11048
CurrentCurrent
A
8 A 4 8 2.24
Millions of Operating Cycles
110
1.1
Millions of Operating Cycles
48
VoltageVoltage
V 24 V 4824 110
CurrentCurrent
A
4 A 2 4 1.12
Millions of Operating Cycles
DC Voltages
DC Voltages
AC Voltages
AC Voltages
Switches & Pilot Devices
Specification Charts
5 Position Selector Switches
HW-U10-F
(NO)
HW1S-3ST
HW1K-3S*
HW-U01-F
(NC)
HW-U01R-F
(NC-LB)
Left
Center
Right
L
X
O
O
R
O
O
X
L
O
O
X
R
X
O
O
L
X
X
O
R
O
X
X
L
O
X
X
R
X
X
O
1. Mounting position indicates which side of operator each contact should be mounted (as
viewed from the front of the panel).
2. *For key removable code see page 663.
1904032200
Contact
HW-U10-F
(NO)
HW1S-5T
HW-U01-F
(NC)
HW-U10R-F
(NO-EM)
HW-U01R-F
(NC-LB)
Operator Position
Mounting
Position
1
2
3
4
5
L
X
O
O
O
O
R
O
O
O
O
X
L
O
O
O
X
O
R
O
X
O
O
O
L
X
X
X
O
X
R
X
O
X
X
X
L
O
X
X
X
X
R
X
X
X
X
O
Circuit Breakers
HW-U10R-F
(NO-EM)
Mounting
Position
Terminal Blocks
Contact
Operator Position
3. HW1S-3T is identified by white plungers on the operator.
4. HW1S-3ST is identified by red plungers on the operator.
5. HW1S-3JT is identified by black plungers on the operator.
800-262-IDEC (4332) • USA & Canada
693
Switches & Pilot Devices
HW Safety Precautions
Turn off power to HW series control units before starting installation, removal,
wiring, maintenance, and inspection of the products. Failure to turn power off
may cause electrical shocks or fire hazard.
Signaling Lights
For wiring, use wires of a proper size to meet voltage and current requirements.
HW General Instructions
Panel Mounting
Remove the contact block assembly from the operator (for transformer type pilot
lights, remove the transformer from the illumination unit). Remove the locking
ring from the operator. Insert the operator into the panel cut-out from the front,
tighten the locking ring from the back, then install the contact block assembly to
the operator.
Removing and Installing the Contact Block Assembly
1. To remove the operator from the contact block, turn the locking lever in the
direction of the arrow shown below. The operator can now be removed.
Relays & Sockets
To avoid the possibility of burning yourself, use the lamp holder tool when
replacing lamps.
2. To reinstall, place the TOP markings on the operator and the contact block
mounting adapter in the same direction, and insert the operator into the
contact block mounting adapter. Then turn the locking lever in the opposite
direction.
Safety Lever Lock
IDEC strongly recommends using the safety lever lock (HW9Z-LS, yellow) to
prevent heavy vibration or maintenance personnel from unlocking the contact
assembly.
1. HW series can be mounted vertically with a minimum spacing of 55 mm
but spacing should be determined to ensure easy operation (recommended
minimum spacing: 100 mm).
2. Mount the control unit onto the panel, lock the lever, and push in the safety
lever lock to install.
3. When the spacing is narrower than the recommended value, with the lever unlocked, mount the safety lever lock and insert the contact unit to the operator.
Then, lock the lever and strongly push in the safety lever lock to install.
4. To remove the safety lever lock, insert a flat screwdriver into the safety lever
and push upwards.
Safety Lever Lock
Screwdriver
Remove
Lock Lever
Safety Lever
Lock
CK
LO
Timers
26.5
Operator
Install
Switches & Pilot Devices
ø22mm - HW Series
Contact Block
Mounting Adapter
Panel
Contactors
Notes for Panel Mounting
1. When mounting the operator onto a panel, use the optional locking ring
wrench (MW9Z-T1) to tighten the locking ring. Tightening torque must not
exceed 2.0 N·m. Do not use pliers. Excessive tightening will damage the
locking ring.
2. For the contact blocks and transformers housing LED lamps, make sure not to
press the lamps too hard, otherwise the lamp socket may be damaged.
Terminal Blocks
Dual Pushbutton Instructions
Replacement of Lens
Removing
Remove the lens by inserting a screwdriver into the recess of the lens through
the bezel.
Installing
Circuit Breakers
Install the lens in the recess between the buttons by pressing against the bezel.
694
www.IDEC.com
1904032200
Switches & Pilot Devices
ø22mm - HW Series
Replacement of Lamps
Installation of LED Illuminated Units
LED lamps can be replaced by using the lamp holder tool (OR-55) from the front
of the panel, or by removing the contact block assembly from the operator unit.
When using full voltage type LED illuminated units, provide protection against
electrical noise, if necessary.
Removing the Lamps from the Front of the Panel
Applicable Wiring
The applicable wire size is 2 mm2 maximum. (solid wire ø1.6mm2 maximum) One
or two wires can be connected.
Removal
7.9 max.
ø3.6 min.
4 max.
5.5 min.
Be sure to use an insulation tube or cover on the crimping part of the crimping
terminal to prevent electrical shocks.
Installation
Solid Wire
Lamp Holder Tool
ø1.6 max.
Lamp
Relays & Sockets
1. To install, insert the lamp
head into the lamp holder
tool, and hold the lamp as
shown in the figure below.
Signaling Lights
Applicable Crimping Terminal
1. To remove, slip the lamp
holder tool onto the lamp
head lightly. Then push
slightly, and turn the lamp
holder tool counterclockwise.
8 max.
2. Place the pins on the lamp
base to the grooves in the
lamp socket. Insert the lamp
and turn it clockwise.
Lamp Base
Note: When connecting wires to contact blocks or transformers in the direction
shown below, keep the insulation stripping length 6.6 mm at the maximum.
X1
Do not attempt
to remove the
pushbuttons!
The dual pushbuttons cannot
be removed or replaced!
X2
Inside
Pushbuttons
X1
Timers
About Dual Pushbutton Switches
Do not attempt to remove
using a flat screwdriver or
pincers, otherwise the dual
pushbuttons may be damaged.
X2
Inside
Installing the Rubber Boot
When mounting the units closely in a horizontal row on 30mm centers, use optional barriers to prevent interconnection between adjoining terminals. The barriers can be attached simply by pressing them onto the sides of contact blocks.
30
30
Notes for Installing the Rubber Boot
Remove the gasket from the operator, and install the rubber boot on the operator.
Pull out the seals of the rubber boot and place them around the operator sleeve
as shown. Make sure that the seals are not twisted or tucked inside and that
the gasket does not remain, otherwise the normal waterproof and dustproof
characteristics are not ensured.
2. Install the rubber boot
on the pushbuttons.
3. Rubber boot is
installed.
Terminal Blocks
1. Remove the gasket.
Seals
Install
Barrier
X1
X2
Inside
Remove
X1
X2
Gasket
Seals
Circuit Breakers
When mounting transformer type illuminated
units closely in a horizontal row on 30-mm
centers, insert solid wires or stranded wires
into inside of the terminal screw on the
transformer (see figure on the right) to prevent
short circuit between adjoining terminals.
Inside
800-262-IDEC (4332) • USA & Canada
Contactors
When using the HW7D pushbuttons in places where the pushbuttons are
subjected to water splash or an excessive amount of dust, make sure to use the
HW9Z-D7D rubber boot (IP65) which is ordered separately.
Narrow Mounting
1904032200
Switches & Pilot Devices
Dual Pushbuttons Instructions continued
695
工商网监
湘ICP备2023018690号
