29069

      Vector network analyzer module Order Number: 29069  Product information "Vector network analyzer module" The Vector network analyzer tests and optimizes the performance of         Antennas (SWR (return loss, S11)) RF filters RF switches Couplers Cables Amplifiers Isolators Mixers Note: To use the VNA application an additional VNA bridge module is needed. The VNA bridge module is available on Red Pitaya's web store. VNA is a contributed Python application by Pavel Demin that runs on a WINDOWS or Linux OS. Software Features      Plot formats: smith chart, impedance, SWR, ref. coeff, return loss Supported calibration modes (open, short & load) Measurement export Marker readouts PC-controlled over LAN of WIFI from a Microsoft Windows interface Hardware Specification     Freq. range 500k to 62MHz Directivity 42 dB, typical Dynamic range: 74dB Noise floor: - 88dBm Package Content    RF swr bridge in aluminium enclosure SMA male calibration accessories (50 ohm, open & short loads) 2x SMA to SMA cable                                      https://shop.trenz‐electronic.de/en/29069‐Vector‐network‐analyzer‐module 6‐28‐18