TEBA0841-02

    TEBA0841 - Simple base for TE0841 and TE0741  Order number: TEBA0841-02 Product information "TEBA0841 - Simple base for TE0841 and TE0741" The TEBA0841 was designed as a low-cost carrier board for Trenz Electronic TE0841 and TE0741 modules. The I/O's of the two FPGA I/O banks can be directly connected to your own circuits with the two 50-pole Pinheaders. Features (preliminary)            Trenz 4 x 5 Module Socket (3x Samtec LSHM Series Connectors) 1 x XMOD (TE0790) Pin Header 1 x Pin Header 16 pol. (JTAG, MGT-CLK, Boot Mode, RST, I/O's) 1 x Pin Header 10 pol. (SD I/O's) 2 x Pin Header 50 pol. (FPGA Bank I/O's and Power) 1 x SFP Connector 1 x MicroUSB 1 x Pin Header for FPGA Bank Power VCCIOA (M1.8VOUT, 2.5V, 3.3VOUT) 1 x Pin Header for FPGA Bank Power VCCIOD (M1.8VOUT, 2.5V, 3.3VOUT) 1 x LDO Voltage Regulator 3.3V to 2.5V 2 x User LED (Red/Green) Recommended Hardware  XMOD FTDI JTAG Adapter (see Accessories) This adapter is not suitable for the supply of basic board + module; a power supply has to be attached seperately. Package Content  1 x TEBA0841-02 carrier board All modules produced by Trenz Electronic are developed and manufactured in Germany.                                                                   https://shop.trenz‐electronic.de/en/TEBA0841‐02‐TEBA0841‐Simple‐base‐for‐TE0841‐and‐TE0741?path=Trenz_Electronic/Modules_and_Module_Carriers/4x5/4x5_Carriers/TEBA0841/REV01/Documents 3‐16‐18