SATA 6Gb/s
2.5” SSD
Manual
The SATA SSD is a non-volatile, solid-state storage device. With its Serial ATA
interface and industry-standard form factors, it is a drop in replacement for hard
disk drives. The SSD delivers extremely high levels of performance, reliability and
ruggedness for I/O intensive or environmentally challenging applications.
Manual
PSFS22xxxxLxxx_SM863A
Revision A
www.vikingtechnology.com
3/16/2017
Viking Technology
Page 1 of 25
Revision History
Date
3/16/17
Manual
PSFS22xxxxLxxx_SM863A
Revision A
www.vikingtechnology.com
Revision
A
Description
Initial release modified from
PSFS22xxxGLxxx_F but change PN
table, TLC to MLC, performance,
latency, QOS, IOPS Consistency,
power consumption, SPOR , TBW and
DWPD. Remove 120GB.
Checked by
3/16/2017
Viking Technology
Page 2 of 25
Legal Information
Legal Information
Copyright© 2017 Sanmina Corporation. All rights reserved. The information in
this document is proprietary and confidential to Sanmina Corporation. No part of
this document may be reproduced in any form or by any means or used to make
any derivative work (such as translation, transformation, or adaptation) without
written permission from Sanmina. Sanmina reserves the right to revise this
documentation and to make changes in content from time to time without
obligation on the part of Sanmina to provide notification of such revision or
change.
Sanmina provides this documentation without warranty, term or condition of any
kind, either expressed or implied, including, but not limited to, expressed and
implied warranties of merchantability, fitness for a particular purpose, and noninfringement. While the information contained herein is believed to be accurate,
such information is preliminary, and should not be relied upon for accuracy or
completeness, and no representations or warranties of accuracy or
completeness are made. In no event will Sanmina be liable for damages arising
directly or indirectly from any use of or reliance upon the information contained in
this document. Sanmina may make improvements or changes in the product(s)
and/or the program(s) described in this documentation at any time.
Sanmina, Viking Technology, Viking Modular Solutions, and logo are trademarks
of Sanmina Corporation. Other company, product or service names mentioned
herein may be trademarks or service marks of their respective owners.
Manual
PSFS22xxxxLxxx_SM863A
Revision A
www.vikingtechnology.com
3/16/2017
Viking Technology
Page 3 of 25
Ordering Information: 2.5” SSD Solid-State Drive
Application
Useable
Capacity
1
(GB)
Temperature
Range
Part Numbers
SATA
Interface
VSFS22240GLCHVSME
SATA 6GB
Enterprise
240 GB
(0 to +70'c)
VSF22480GLCHVSME
SATA 6GB
Enterprise
480 GB
(0 to +70'c)
VSFS22960GLCZVSDE
SATA 6GB
Enterprise
960 GB
(0 to +70'c)
VSFS221T92LCFVSME
SATA 6GB
Enterprise
1920 GB
(0 to +70'c)
VSFS223T84LCGVSME
SATA 6GB
Enterprise
3840 GB
(0 to +70'c)
NAND
Samsung V3
VNAND, MLC
Samsung V3
VNAND, MLC
Samsung V3
VNAND, MLC
Samsung V3
VNAND, MLC
Samsung V3
VNAND, MLC
Usable capacity based on specification LBA1-03a and level of over-provisioning applied to wear leveling, bad sectors,
index tables etc.
SSD’s ship unformatted from the factory unless otherwise requested.
1 GB = 1,000,000,000 Byte
One Sector = 512 Byte.
“y’ specifies flash capacity code
xx is a wild card to indicate customer specific BOM and/or manufacturing location
SSD drive part numbers with an E suffix (VSxxxxxxxxxE) are self-encrypting drives (SED)
Enterprise SSD – An Enterprise SSD contains hardware and firmware that detect and
manage power failures. This allows the drive to flush the controller cache and harden data to
NAND flash. No data is lost or corrupted.
Manual
PSFS22xxxxLxxx_SM863A
Revision A
www.vikingtechnology.com
3/16/2017
Viking Technology
Page 4 of 25
Table of Contents
1
GENERAL DESCRIPTION
8
1.1
FEATURES
8
1.2
DRIVE CONFIGURATION
8
1.3
PERFORMANCE SPECIFICATIONS
1.4
RELIABILITY SPECIFICATIONS
8
1.5
ENVIRONMENTAL SPECIFICATIONS
9
1.6
POWER REQUIREMENTS
9
1.7
PHYSICAL DIMENSION
9
2
8
2
MECHANICAL SPECIFICATION
10
3
PRODUCT SPECIFICATIONS
11
3.1
System Interface and Configuration
11
3.2
System Performance
11
3.3
Drive Capacity
12
3.4
Operating Voltage
12
3.5
System Power Consumption
12
3.6
System Reliability
13
3.7
Environmental Specifications
13
3.8
IOPS Consistency
13
3.9
Latency
14
3.10
Quality of Service (QoS)
14
4
4.1
ELECTRICAL INTERFACE SPECIFICATION
Serial ATA Interface Connector
Manual
PSFS22xxxxLxxx_SM863A
Revision A
www.vikingtechnology.com
15
15
3/16/2017
Viking Technology
Page 5 of 25
4.2
5
Pin Assignments
16
COMMAND DESCRIPTIONS
17
5.1
Supported ATA Commands
17
5.2
Individual Attribute Data Structure
18
6
SPOR SPECIFICATION (SUDDEN POWER OFF AND RECOVERY)
20
6.1
Data Recovery in Sudden Power Off
20
6.2
Time to Ready Sequence
20
7
7.1
8
8.1
9
DATA SECURITY
Encrytion
PRODUCT COMPLIANCE
Product Regulatory Compliance and Certifications
IDENTIFY DEVICE DATA
21
21
21
21
22
9.1
Identify Device Data
22
10
REFERENCES
25
Manual
PSFS22xxxxLxxx_SM863A
Revision A
www.vikingtechnology.com
3/16/2017
Viking Technology
Page 6 of 25
Table of Tables
Table 2-1: Physical Dimensions and Weight ________________________________________ 10
1
Table 3-1: Sequential Read / Write and Sustained Random Read / Write Performance ______ 11
1, 2
Table 3-2: User Capacity and LBA Addressable Sectors _____________________________ 12
Table 3-3: Operating Voltage ____________________________________________________ 12
Table 3-4: Power Consumption __________________________________________________ 12
Table 3-5: TBW, MTBF, UBER Specifications _______________________________________ 13
Table 3-6: Environmental Specifications ___________________________________________ 13
Table 3-7: IOPS Consistency ____________________________________________________ 13
Table 3-8: Latency ____________________________________________________________ 14
Table 4-1: Pin Assignments_____________________________________________________ 16
Table 5-1: Supported ATA Commands Summary ____________________________________ 17
Table 5-2: Attribute Entry in Device Attribute Data Structure ___________________________ 18
1
Table 5-3: S.M.A.R.T. Attributes _________________________________________________ 19
Table 6-1: Device Ready Time for Normal Read/Write after Sudden Power off _____________ 20
Table 8-1: Standards Reference _________________________________________________ 21
Table 9-1: List of Device Identification _____________________________________________ 22
Table of Figures
Figure 2-1: Physical Dimension __________________________________________________ 10
Figure 4-1: Layout of Drive Connector: AMPHENOL, SATA-001-0009-1-TR _______________ 15
Figure 6-1: Time to Ready Sequence______________________________________________ 20
Manual
PSFS22xxxxLxxx_SM863A
Revision A
www.vikingtechnology.com
3/16/2017
Viking Technology
Page 7 of 25
1 General Description
1.1 FEATURES
High-Speed 8 Channel 8 Way Architecture
Samsung Triple 500MHz Cortex-R Core Controller
Samsung V3 NAND Flash Memory
Up to 2GB LPDDR3 DRAM Buffer Memory
Serial ATA 6.0Gbps Interface
Fully complies with Serial ATA 3.0 Standard
ATA Security Mode feature set
ATA Host Protected Area feature set
Support NCQ (Up to 32 depth) Command Set
Support TRIM Command
Asynchronous Signal Recovery
End-to-End Data Protection
AES 256-bit Encryption
RoHS Compliant
1.2 DRIVE CONFIGURATION
Form Factor
Interface
Buffer DRAM Size
Bytes per Sector
2.5”
SATA 6.0 Gbps
512 Megabytes
512 Bytes
1.3 PERFORMANCE SPECIFICATIONS2
Data Transfer Rate
Sequential Read (128KB)
Sequential Write (128KB)
Random Read (4KB)
Random Write (4KB)
IOPS Consistency (Read/Write @4KB)
Average Latency (Read/Write @4KB, QD32 Avg.)
Quality of Service(99.99%)
Read (4KB, QD=1)
Write (4KB, QD=1)
Up to 510 MB/s
Up to 485 MB/s
Up to 95 KIOPS
Up to 28 KIOPS
99% / 97%
110 us / 35 us
0.16 ms
0.15 ms
1.4 RELIABILITY SPECIFICATIONS
Non-recoverable Read Error
MTBF
Manual
PSFS22xxxxLxxx_SM863A
Revision A
www.vikingtechnology.com
1 sector per 1017 bits read
2,000,000 hours
3/16/2017
Viking Technology
Page 8 of 25
1.5 ENVIRONMENTAL SPECIFICATIONS
Temperature
Operating3
Non-operating
Humidity (on-condensing)
Non-operating
Linear Shock (1/2 sine pulse)
Non-operating, 0.5ms
Vibration (20min /axis on 3 axes)
Non-Operating (10 ~ 2,000 Hz, Sweep Sine)
0 ~ 70 °C
-40 ~ 85 °C
5 ~ 95 %
1,500 G
20 G
1.6 POWER REQUIREMENTS
Supply Voltage
Voltage Ripple/Noise (Max.)
Active4 (Read)
Active (Write)
Idle5 (Typical)
+5V ± 5%
100 mV p-p
2.5 W RMS
3.0 W RMS
1.3 W
1.7 PHYSICAL DIMENSION
Width
Depth
Height
Weight
100.20 ± 0.25 mm
69.85 ± 0.25 mm
6.80 ± 0.20 mm
Up to 60 g
NOTES: Specifications are subject to change without notice.
1) 1MB = 1,000,000 Bytes, 1GB = 1,000,000,000 Bytes, Unformatted Capacity. User accessible
capacity may vary depending on operating environment and formatting.
2) Performance measured using IOMeter 2006 with queue depth 32. Measurements are
performed on whole LBA range. Write cache enabled. Performance varies on capacity
3) Tc : Case Temperature
4) Active Read power is measured on 4 KB random read with 1920 GB density. Active Write
power is measured on 128 KB sequential write with 1920 GB density.
5) Idle power is measured on 1920 GB density with DIPM off.
Manual
PSFS22xxxxLxxx_SM863A
Revision A
www.vikingtechnology.com
3/16/2017
Viking Technology
Page 9 of 25
2 Mechanical Specification
Table 2-1: Physical Dimensions and Weight
Capacity (GB)
120 / 240 / 480 / 960 / 1,920
Height (mm)
6.80 · 0.20
Width (mm)
69.85 · 0.25
Length (mm)
100.20 · 0.25
Weight
(gram)
60 g
Figure 2-1: Physical Dimension
Manual
PSFS22xxxxLxxx_SM863A
Revision A
www.vikingtechnology.com
3/16/2017
Viking Technology
Page 10 of 25
3 Product Specifications
3.1 System Interface and Configuration
Burst read / write rate is 600 MB/sec (6 Gb/s)
Fully compatible with ATA/ATAPI-7 Standard
Compatible with ATA/ATAPI-8 Mandatory Command
3.2 System Performance
Table 3-1: Sequential Read / Write and Sustained Random Read / Write
Performance1
240 GB
480 GB
960 GB
1,920 GB
Sequential Read
Sector (128 KB)
410 MB/s
510 MB/s
510 MB/s
510 MB/s
Sequential Write
Sector (128 KB)
485MB/s
485 MB/s
485 MB/s
485 MB/s
Random Read
IOPS (8 KB)
50K IOPS
55K IOPS
55K IOPS
55K IOPS
Random Write
IOPS (8 KB)
5K IOPS
9K IOPS
12K IOPS
13K IOPS
Random Read
IOPS (4 KB)
90K IOPS
95K IOPS
95K IOPS
95K IOPS
Random Write
IOPS (4 KB)
10K IOPS
19K IOPS
25K IOPS
28K IOPS
Read / Write
NOTES:
1. Actual performance may vary depending on use conditions and environment.
Performance measured using IOMeter 2006 with queue depth 32, C216 Intel SATA 6G port.
2) Measurements are performed on whole LBA range.
3) Write cache enabled.
4) 1 MB/sec = 1,048,576 bytes/sec was used in sequential performance.
Manual
PSFS22xxxxLxxx_SM863A
Revision A
www.vikingtechnology.com
3/16/2017
Viking Technology
Page 11 of 25
3.3 Drive Capacity
Table 3-2: User Capacity and LBA Addressable Sectors1, 2
User-Addressable Sectors
240 GB
480 GB
960 GB
1,920 GB
468,862,128
937,703,088
1,875,385,008
3,750,748,848
Bytes per Sector
512 bytes
NOTE:
1. Megabyte (MB) = 1 Million bytes; 1 Gigabyte (GB) = 1 Billion bytes
2. Actual usable capacity may be less (due to formatting, partitioning, operating system,
applications or otherwise).
3.4 Operating Voltage
Table 3-3: Operating Voltage
Item
Allowable voltage
Requirements
5.0 V + 5%
Allowable noise / ripple
100 mV p-p or less
1
Inrush Current
1.0A,