SB0606WC01-RG

SpectraBright Series 0606 Package Size SMD RGB and Bi-Color LEDs Space-Saving, Multi-Status Indication and Multicolor/Brightness Options Enhance Design Possibilities. Application • Automated Guided Vehicles • EV Charging Stations • Navigations Systems • Industrial Controls • IoT/Smart Home Systems • Medical Devices • Mil-Aero • Telecom • Status Indicator Key Features • Package size 0606 • Tape and reel packaged for high-speed auto insertion • Through-hole, SMD • Clear lens • Tri-color: RGB • Bi-color: Red/Green • Enjoy high visibility in a range of working environments thanks to a wide, 120° viewing angle • High and low intensity options available. Mcd ranging from 15 to 160 mcd • For custom LED color contact VCC • MIL-STD-750 D:1026, and MIL-STD-883 D:1005 Standards • RoHS, REACH Compliant vcclite.com | 1.800.522.5546 SpectraBright 0606 | 11/22 | Page 1 of 10 Ordering Data Part Number Color Brightness Lens Type Viewing Angle (deg) Mil Size L x W (mm) Height (mm) SB0606WC01-RGB RGB High Water Clear 120 1616 1.6 x 1.6 0.6 SB0606WC02-RGB RGB Low Water Clear 120 1616 1.6 x 1.6 0.6 SB0606WC01-RG Red/Green High Water Clear 120 1616 1.6 x 1.6 0.6 vcclite.com | 1.800.522.5546 SpectraBright 0606 | 11/22 | Page 2 of 10 Product Dimensions SB0606WC01-RG SB0606WC02-RGB YG SB0606WC01-RGB Notes: 1. All dimensions are in mm 2. Tolerance is ±0.1 mm unless otherwise noted 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. vcclite.com | 1.800.522.5546 SpectraBright 0606 | 11/22 | Page 3 of 10 Product Specifications Color Dominant Wavelength (nm) @ IF=20mA Luminous Intensity (mcd) IF=20mA Forward Voltage (Vf) @ If=20mA Viewing Angle (deg) SB0606WC01-RGB RGB R=635, G=518, B=460 R=160, G=600, B=125 R=2V, G=3V, B=3V 120 SB0606WC02-RGB RGB R=635, G=518, B=460 R=35, G=75, B=20 R=3V, G=3V, B=3V 120 SB0606WC01-RG Red/Green R=625, G=568 R=160, G=40 R=2V, G=2V 120 Part Number vcclite.com | 1.800.522.5546 SpectraBright 0606 | 11/22 | Page 4 of 10 Product Specifications SB0606WC01-RG vcclite.com | 1.800.522.5546 SpectraBright 0606 | 11/22 | Page 5 of 10 Product Specifications SB0606WC02-RGB vcclite.com | 1.800.522.5546 SpectraBright 0606 | 11/22 | Page 6 of 10 Product Specifications SB0606WC01-RGB vcclite.com | 1.800.522.5546 SpectraBright 0606 | 11/22 | Page 7 of 10 Precautions Reliability Test Classification Test Item Test Condition Test Time Reference Standard Operation Life 25ma Ta= Under Room Temperature As Per Datasheet Maximum Rating 1000 HRS (-24 HRS, +72 HRS) MIL-STD-750 D:1026 MIL-STD-883 D:1005 High Temperature, High Humidity Storage IR-Reflow In-Board, 2 Tlmes Ta=85? ˚C RH=85%IR-Reflow In-Board, 2 Times Ta=85? ˚C RH=85% 1000 HRS (±2 HRS) JESD22-A101 High Temperature Storage Ta=105±5˚C 1000 HRS (-24 HRS, +72 HRS) MIL-STD-883 D:1008 JIS C 7021:B-10 Low Temperature Storage Ta=-40±5˚C 1000 HRS (-24 HRS, +72 HRS) JIS C 7021:B-10 Temperature Cycling 100˚C ~ 25˚C ~ -40˚C ~ 25˚C 30mins 5mins 30mins 5mins 100/Cycles MIL-STD-202F:107D MIL-STD-750D:1051 Thermal Shock IR-Reflow In-Board, 2 Tlmes 100 ± 5˚C ~ -40˚C ± 5˚C 10mins 10mins 100/Cycles MIL-STD-202F:107D MIL-STD-750D:1051 ReflowPb Free Process 260˚C: 10 Peak temperature range 260˚C 10s max ------ MIL-STD-750 D:2031.2 J-STD-020C Endurance Test Soldering Profile vcclite.com | 1.800.522.5546 SpectraBright 0606 | 11/22 | Page 8 of 10 Precautions Soldering • Reflow soldering should not be done more than 2 times. • Manual soldering is only suggested on repair and rework. The maximum soldering temperature should not exceed 300˚C within 3 sec. And the maximum capacity of soldering iron is 30W in power. • During the soldering process, do not touch the lens at high temperature. • After soldering, any mechanical force on the lens or any excessive vibration shall not be accepted to apply, also the circuit board shall not be bent as well. Application • A LED is a current-operated device. The slight shift of voltage will cause big change of current, which will damage LEDs. Customer should use resistors in series for the Over-Current-Proof. • In order to ensure intensity uniformity on multiple LEDs connected in parallel in an application, it is recommended to use individual resistor separately, as shown in Circuit A below. The brightness of each LED shown in Circuit B might appear difference due to the differences in the I-V characteristics of those LEDs Circuit model A Circuit model B • High temperature may reduce LEDs’ intensity and other performances, so keeping it away from heat source to get good performance is necessary. Rank Tolerance REF / VF: ±0.02V CAT / IV: ±10% X / Y: ±0.005 Storage • Before opening original package, it is recommended to store them in the following environment: Temperature: 5°C~30°C,Humidity: 85%RH max. When the inventory over 3 months,Should be done before treatment using dehumidification, Temperature: 60°C/8 hours. • 5~ 30˚C ; 60% after opening original package, the storage ambient for the LEDs should be in 5~30˚C temperature and 60% or less relative humidity. • In order to avoid moisture absorption, it is recommended that the LEDs that out of the original package should be stored in a sealed container with appropriate desiccant, or in desiccators with nitrogen ambient. • The LEDs should be used within 168hrs (7days) after opening the package. Once been mounted, soldering should be quick. • If the moisture absorbent material (silica gel) has faded away or the LEDs stored out of original package for more than 168hrs (7 days), baking treatment should be performed using the conditions: 60˚C at least 24 hours. vcclite.com | 1.800.522.5546 SpectraBright 0606 | 11/22 | Page 9 of 10 Tape and Reel Specifications YG 4000 pieces per reel Notes: 1. All dimensions are in mm 2. Tolerance is ±0.1 mm unless otherwise noted 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. Compliances and Approvals vcclite.com | 1.800.522.5546 SpectraBright 0606 | 11/22 | Page 10 of 10