A97003-021

Micro-D Hardware & Misc Hardware Selection #2-56 UNC-2A MATING FACE #2-56 UNC-2A MATING FACE #2-56 UNC-2A MATING (03FACE OPTION) (00 OPTION) NO HARDWARE (00 OPTION) NO HARDWARE (00 OPTION) NO HARDWARE E-CLIP E-CLIP 132 E-CLIP JACKSCREW, UNC-2A .361 MAX 9.17 MAX (03 #2-56 OPTION) STANDARD MATING FACE JACKSCREW, .361 MAX 9.17 MAX (03 OPTION) LENGTH WITH STANDARD E-CLIP JACKSCREW, SLOTTED DRIVE .088 2.24 (00 OPTION) LENGTH WITH .361 MAX 9.17 MAX .096 2.44 STANDARD NO HARDWARE SLOTTED DRIVE .088 2.24 LENGTH WITH (03 OPTION) .125 3.18 HEX SLOTTED DRIVE SLOTTED DRIVE JACKSCREW, .125 3.18 HEX .361 MAX 9.17 MAX SLOTTED DRIVE .096 2.44 STANDARD #2-56 UNC-2B #2-56 UNC-2B .125.088 3.18 HEX .1902.24 4.83 LENGTH WITH SLOTTED DRIVE .190 4.83 MATING FACE #2-56 UNC-2A #2-56 UNC-2A SLOTTED DRIVE MATING FACE #2-56 UNC-2A .1854.70 4.70 #2-56 UNC-2B .185 #2-56 UNC-2A .190 4.83 MATING FACE MATING FACE #2-56 UNC-2A MATING FACE MATING FACE #2-56 UNC-2A .125.185 3.184.70HEX MATING FACESLOTTED DRIVE E-CLIP MATING FACE E-CLIP E-CLIP MATING FACE E-CLIP #2-56 UNC-2B (00 OPTION) E-CLIP .190 4.83 (00 OPTION) NO HARDWARE E-CLIP (00 OPTION) MATING FACE OPTION) #2-56 UNC-2A(03 OPTION) NO HARDWARE .185 4.70 **(01**(01 OPTION) NO HARDWARE .475±.010 12.07±0.25 ** (04 OPTION) FIXED (03 OPTION) JACKSCREW, MATING FACE .361 MAX 9.17 MAX **(01 OPTION) (04 OPTION) FIXED (03 OPTION) .096 2.44 .475±.010 12.07 ±0.25 ** JACKSCREW, JACKPOST JACKSCREW, STANDARD .361 MAX 9.17 MAX (04 OPTION) FIXED E-CLIP .475±.010 12.07 ±0.252.44 ** JACKSCREW, .096 JACKSCREW, JACKPOST .088 2.24 LONG WITH STANDARD LENGTH WITH .361 MAX 9.17 MAX .096 2.44 JACKSCREW, JACKPOST STANDARD .088 2.24 HEX DRIVE LONG WITH LENGTH WITH SLOTTED DRIVE LONG WITH .088 2.24 **(01 OPTION) LENGTH WITH SLOTTED HEX DRIVE DRIVE HEX DRIVE (04 OPTION) FIXED SLOTTED DRIVE .868 MAX 22.05 MAX LOCK 12.07 WASHER .475±.010 .125 ±0.25 3.18 ** HEX #2-56 UNC-2A SLOTTED DRIVEMAX JACKSCREW, JACKPOST .868 MAX 22.05 .868 MAX 22.05 MAX .125 3.18 HEX NUT LOCK WASHER LOCK SLOTTED DRIVE .125WASHER 3.18 HEX LONG WITH #2-56 UNC-2A #2-56 UNC-2B #2-56 UNC-2A SLOTTED DRIVE .190 4.83 #2-56 UNC-2B .154 3.91 HEX HEX DRIVE #2-56 UNC-2A NUT MATING FACE NUT .190 #2-56 UNC-2B .185 4.83 4.70 .190 4.83 MATING FACE .868 MAX 22.05 MAX #2-56 UNC-2A 3.91HEX HEX MATING FACE .185 4.70 .154 .154 3.91 LOCK.185 WASHER #2-56 UNC-2A 4.70 #2-56 MATING UNC-2A FACE MATING FACE E-CLIP NUT MATING FACE #2-56 UNC-2A E-CLIP .154 3.91 HEX E-CLIP .062 HEX DRIVE MATING FACE **(01 OPTION) #2-56 UNC-2A (04 OPTION) .062 HEX DRIVE **(01 OPTION) FIXED .475±.010 12.07±0.25 ** #2-56 UNC-2A MATING FACE E-CLIP **(01 OPTION) (04 OPTION) JACKSCREW, FIXED JACKPOST .475±.010 12.07±0.25 ** #2-56 UNC-2A (04 OPTION) FIXED .062 HEX DRIVE MATING FACE .475±.010 12.07 ±0.25 ** JACKSCREW, LONG WITH JACKPOST E-CLIP MATINGJACKSCREW, FACE #2-56 UNC-2A *(02 OPTION) JACKPOST #2-56 UNC-2A LONG WITH HEX DRIVE E-CLIP MATING FACE JACKSCREW, WITH E-CLIP MATING LONG FACE HEX DRIVE .062 HEX DRIVE *(02 OPTION) .361 MAX 9.17 MAX * .868 MAX 22.05 MAX #2-56 UNC-2A STANDARD HEX DRIVE LOCK WASHER E-CLIP JACKSCREW, E-CLIP .868 MAX 22.05 MAX #2-56 UNC-2A LENGTH WITH MATING FACE LOCK WASHER .361 MAX 9.17 MAX * #2-56 UNC-2A .868 MAX 22.05 MAX *(02 OPTION) STANDARD NUT #2-56 UNC-2A LOCK WASHER HEX DRIVE #2-56 (05 OPTION) MATING FACE E-CLIP LENGTH WITH.154 UNC-2A NUT *(02 OPTION) JACKSCREW, 3.91 HEX JACKSCREW, NUT * E-CLIP HEX DRIVE .154 3.91 HEX.361 MAX 9.17 MAX JACKSCREW, (05 OPTION) STANDARD .062 HEX DRIVE LONG WITH .361 MAX 9.17 MAX * .154 3.91 HEX STANDARD JACKSCREW, LENGTH WITH SLOTTED DRIVE .062 HEX DRIVE LENGTH WITH LONG WITH HEX DRIVE .868 MAX 22.05 MAX (05 OPTION) HEX DRIVE #2-56 UNC-2A SLOTTED DRIVE (05 OPTION) JACKSCREW, #2-56 UNC-2A JACKSCREW, .062MAX HEX DRIVE .868 MAX 22.05 MATING FACE #2-56 UNC-2A *FOR ALL TYPES EXCEPT HORIZONTAL SURFACE MOUNT (H0). .062 DRIVE .062 HEX HEX DRIVE LONG LONG WITH WITH .062 HEX DRIVE MATING FACE OVERALLMATING LENGTH FOR STANDARD H0 JACKSCREW IS .485 .062 HEX DRIVE FACE HORIZONTAL SURFACE E-CLIPMOUNT (H0). SLOTTED DRIVE DRIVE SLOTTED *FOR TYPES EXCEPT #2-56 UNC-2A [12.32]ALL MAX. E-CLIP IS .485 OVERALL LENGTH FOR STANDARD H0 JACKSCREW .868 MAX 22.05 #2-56 UNC-2A E-CLIP MATING FACE .868 MAX MAX 22.05 MAX *(02 OPTION) #2-56 UNC-2A [12.32] MATING FACE **FOR MAX. ALL TYPES EXCEPT S2 AND R2. OVERALL LENGTH FOR E-CLIP *(02 OPTION) JACKSCREW, MATING FACE *FOR ALL*(02 TYPES EXCEPTIS HORIZONTAL SURFACE MOUNT (H0).* .361 MAX 9.17 MAX OPTION) STANDARD S2JACKSCREW, JACKPOST .560 [14.22] MAX AND .385 [9.78] E-CLIP STANDARD *FOR ALLALL TYPES EXCEPT HORIZONTAL SURFACE **FOR TYPES EXCEPT S2 AND R2.H0 OVERALL LENGTH FOR *(H0). OVERALL LENGTH FOR STANDARD JACKSCREW ISMOUNT .485 E-CLIP .361 MAX 9.17 MAX JACKSCREW, MAX FOR R2. STANDARD LENGTH SLOTTED DRIVE OVERALL FORWITH STANDARD JACKSCREW IS *.485 STANDARD S2 JACKPOST IS .560 [14.22]H0 MAX AND9.17 .385MAX [9.78] .361 MAX [12.32] LENGTH MAX. STANDARD WITH HEX DRIVE (05 OPTION) MAX FORLENGTH R2. LENGTH [12.32] MAX. HEXWITH DRIVE S2 AND R2. OVERALL LENGTH FOR (05 OPTION) SLOTTED DRIVE JACKSCREW, **FOR ALLHEX TYPES EXCEPT DRIVE (05 OPTION) .062 HEX DRIVE JACKSCREW, LONG WITH STANDARD S2 JACKPOST [14.22] AND .385 [9.78] FOR JACKSCREW, **FOR ALL TYPES EXCEPT IS S2.560 AND R2. MAX OVERALL LENGTH .062 HEX DRIVE LONG WITH SLOTTED DRIVE MAX FOR R2. SLOTTED DRIVE .062 HEX DRIVE LONG WITH STANDARD S2 JACKPOST IS .560 [14.22] MAX AND .385 [9.78] SLOTTED DRIVE .868 MAX 22.05 MAX SLOTTED DRIVE MAX FOR R2. .868 MAXDRIVE 22.05 MAX SLOTTED .868 MAX 22.05 MAX *FOR ALL TYPES EXCEPT HORIZONTAL SURFACE MOUNT (H0). *FOR ALL TYPES EXCEPT HORIZONTAL SURFACE MOUNT OVERALL LENGTH FOR STANDARD H0 JACKSCREW IS .485(H0). *FOR ALL TYPES EXCEPT HORIZONTAL SURFACE MOUNT OVERALL LENGTH FOR STANDARD H0 JACKSCREW IS (H0). .485 [12.32] MAX. OVERALL FOR STANDARD H0 JACKSCREW IS .485 [12.32] LENGTH MAX. [12.32] MAX. **FOR ALL TYPES EXCEPT S2 AND R2. OVERALL LENGTH FOR **FOR ALL TYPES EXCEPTISS2.560 AND R2. OVERALL FOR STANDARD S2 JACKPOST [14.22] MAX ANDLENGTH .385 [9.78] **FOR ALL TYPES S2 IS AND OVERALL LENGTH STANDARD JACKPOST .560R2. [14.22] MAX AND .385 FOR [9.78] MAX FOR R2.S2 EXCEPT SLOTTED DRIVE STANDARD S2R2. JACKPOST IS .560 [14.22] MAX AND .385 [9.78] MAX FOR SLOTTED DRIVE MAX FOR R2. SLOTTED DRIVE .096 2.44 .0882.44 2.24 .096 7260 Commerce Circle E • Minneapolis, MN 55432-3103 Phone: 763.572.0656 Fax: 763.572.3925 Email: sales@omnetics.com www.omnetics.com Micro-D Hardware & Misc Harware Selection Cont... MATING FACE MATING FACE (06 OPTION) FLOAT MOUNT, (06 OPTION) FRONT MOUNTED FLOAT MOUNT, FRONT MOUNTED .0900±.0015 2.29±0.04 .0900±.0015 2.29±0.04 MATING FACE MATING FACE (07 OPTION) FLOAT MOUNT, (07 OPTION) REAR MOUNTED FLOAT MOUNT, REAR MOUNTED .0900±.0015 2.29±0.04 .0900±.0015 2.29±0.04 .014 .004 DIA. FLOAT .020 FLOAT .014MAX .004AXIAL DIA. FLOAT .020 MAX AXIAL FLOAT .185 MAX 4.70 MAX .185 MAX 4.70 MAX .031±.003 0.79±0.08 .031±.003 0.79±0.08 .031±.003 0.79±0.08 .031±.003 0.79±0.08 .185 MAX 4.70 MAX .185 MAX 4.70 MAX .014 .004 DIA. FLOAT .020 FLOAT .014MAX .004AXIAL DIA. FLOAT .020 MAX AXIAL FLOAT TO ORDER LOOSE HARDWARE SEPARATELY, USE OMNETICS PART NUMBERS BELOW *FOR ALL TYPES EXCEPT HORIZONTAL SURFACE MOUNT (H0). Kit DescriptionOVERALL Omnetics FOR STANDARD H0 JACKSCREW ISPart .485#(H0).Harware Code (Ref) *FOR ALLLENGTH TYPES EXCEPT HORIZONTAL SURFACE MOUNT [12.32] MAX. OVERALL STANDARD H0 JACKSCREW IS .485 Jackscrew Assembly, #2-56,LENGTH Standard FOR Length with Hex Drive A97007-001 02 [12.32] MAX. Jackscrew Assembly, Standard LengthS2 with Slotted Drive A97008-001 03 **FOR#2-56, ALL TYPES EXCEPT AND R2. OVERALL LENGTH FOR STANDARD S2 JACKPOST IS .560 [14.22] MAX AND .385 [9.78] Jackscrew Assembly, #2-56, Length with HexR2. Drive A97007-002 04 **FOR ALLExtended TYPES EXCEPT S2 AND OVERALL LENGTH FOR MAX FOR R2. STANDARD S2 JACKPOST IS .560 [14.22] MAX AND .385 [9.78] Jackscrew Assembly, #2-56, Extended Length with Slotted Drive A97008-002 05 MAX#2-56, FOR R2. Jackscrew Assembly, Standard Length with Hex Drive* (H0) A97007-003 02 Jackpost Assembly, Standard A97009-001 01 Jackpost Assembly, Extended** (S2) A97009-002 01 Jackpost Assembly, Short** (R2) A97009-003 01 133 *FOR ALL TYPES EXCEPT HORIZONTAL SURFACE MOUNT (H0). OVERALL LENGTH FOR STANDARD H0 TO ORDER HARDWARE SEPARATELY, USE OMNETICS PART NUMBERS BELOW JACKSCREW IS LOOSE .485 [12.32] MAX. **FOR ALL TYPES EXCEPT S2 AND R2. LENGTHUSE FOROMNETICS STANDARD PART S2 JACKPOST IS .560 [14.22] TO ORDER LOOSE HARDWAREOVERALL SEPARATELY, NUMBERS BELOW MAX AND .385 [9.78] MAX FOR R2. HARDWARE KIT DESCRIPTION OMNETICS PART # HARDWARE (REF) CODE KIT DESCRIPTION OMNETICS PART # ACKSCREW7260 ASSEMBLY, #2-56, STANDARD LENGTH WITH HEX DRIVE A97007-001 02 (REF) CODE Commerce Circle E • Minneapolis, MN 55432-3103 ACKSCREW ASSEMBLY, STANDARD DRIVE A97008-001 03 Phone: 763.572.0656#2-56, Fax: 763.572.3925 ACKSCREW ASSEMBLY, #2-56, STANDARDLENGTH LENGTHWITH WITHSLOTTED HEX DRIVE A97007-001 02 Email: sales@omnetics.com ACKSCREW LENGTH WITH HEX DRIVE DRIVE A97007-002 04 ACKSCREWASSEMBLY, ASSEMBLY,#2-56, #2-56,EXTENDED STANDARD LENGTH WITH SLOTTED A97008-001 03 www.omnetics.com ACKSCREW DRIVE A97008-002 05 ACKSCREWASSEMBLY, ASSEMBLY,#2-56, #2-56,EXTENDED EXTENDEDLENGTH LENGTHWITH WITHSLOTTED HEX DRIVE A97007-002 04 Micro-D Hardware & Misc Panel Mount Harware Selection FRONT MOUNTE .125 3.18 HEX #2-56 UNC-2B .125 3.18 HEX MATING FACE #2-56 UNC-2B.093 2.36 MATING FACE .093 2.36 FRONT MOUNTED .125 3.18 HEX #2-56 UNC-2B MATING FACE "C" "B"±.010 A A .154 3.91 HEX PANEL, "A" MAX THICK .020 0.51 EACH KIT INCLUDES TWO JACKPOSTS, WASHERS, AND NUTS. FOR USE WITH REGULAR WIRED .020 0.51OR SOLDERCUP MICRO-D CONNECTORS. EACH KIT INCLUDES TWO JACKPOSTS, .154 3.91 HEX PANEL, "A" MAX THICK WASHERS, AND NUTS. FOR USE WITH REGULAR WIRED OR SOLDERCUP .020 0.51 MICRO-D CONNECTORS. DETAIL A SCALE 4 : 1 DETAIL A SCALE 4 : 1 DETAIL A SCALE 4 : 1 .067 MAX 1.70 MAX English (IN) "A" .05 .13 "B" .475 .550 "C" .195 .270 .05 .47 METRIC OMNETICS .13 .55 "C" (MM) "A" "B" "C" PART # EACH KIT THICK NUTS. FOR 1.3 PANEL, 12.07 "A" 4.94 MAX A97006-001 MICRO-D 3.2 13.97 6.85 A97006-002EACH KIT IN ENGLISH (IN) "A" "B" A"C" "B"±.010 .154 3.91 HEX .05 .475 .195 .13 .550 .270 "C" ENGL "A" ENGLIS .05 . "A" "B .13 . "B"±.010 .093 2.36 FRONT MOUNT FRONT MOUNTED NUTS. FOR U MICRO-D CO .067 MAX 1.70 MAX .067 MAX 1.70 MAX Metric (mm) Omnetics Part # "A" 1.3 3.2 A 97006-001 A 97006-002 "B" "C" 12.07 4.94 13.97 6.85 REAR MOUNTED REAR MOUNTED ENGLISH (IN) METRIC (MM) OMNETICS English (IN) 134 “A” MIN MAX .027 0.33 .059 0.65 .090 0.96 ENGLISH (IN) METRIC (MM) "A" "A" 0.79 REAR.031 MOUNT .063 1.6 .094 2.39 Metric (mm) OMNETICS PART # A97006-101 A97006-102 A97006-103 Omnetics Part # EACH KIT “A”INCLUDES TWO JACKPOSTS, WASHERS, AND NUTS. FOR USE WITH MIN MAX REGULAR WIRED OR SOLDERCUP MICRO-D .69 CONNECTORS. .84 A97006-101 1.50 1.65 2.29 2.44 7260 COMMERCE CIRCLE EAST MINNEAPOLIS, MN 55432 (763) 572-0656 WWW.OMNETICS.COM A97006-102 A97006-103 REAR PANE "A" "A" PART MOUNTED # .028 0.71 .031 0.79 A97006-101 MATING FACE PANEL, "A".063 THICK ENGLISH (IN) METRIC (MM) OMNETICS 1.6 A97006-102 PANEL A97006-103 "A" .094 "A" 2.39 PART # .475 ±.01 .031 0.79 A97006-101 #2-56 UNC-2B .063 1.6 TWO JACKPOSTS, A97006-102 KIT INCLUDES .475±.010EACH 12.07±0.25 WASHERS, AND 2.39 NUTS. FOR A97006-103 USE WITH .094 REGULAR WIRED OR SOLDERCUP MICRO-D CONNECTORS. .475±.010 EACH KIT INCLUDES TWO JACKPOSTS, WASHERS, AND NUTS. FOR USE WITH .154 3.91 HEX REGULAR WIRED OR SOLDERCUP MICRO-D CONNECTORS. 7260 COMMERCE CIRCLE EAST CAGE CODE: 7260 Commerce Circle E • Minneapolis, MN 55432-3103 MINNEAPOLIS, MN 55432 MICRO-D 61873 Phone: 763.572.0656 Fax: 763.572.3925 (763) 572-0656 HARDWARE DIMENSIONS IN WWW.OMNETICS.COM Email: sales@omnetics.com SELECTION INCHES .005 www.omnetics.com [mm] .13 7260 COMMERCE CIRCLE EAST Micro-D Hardware & Misc Panel Mount Cut Out "A" ±.002 "A"±0.05 FRONT MOUNTED "B" CONTACTS "n" ROWS 9 2 15 2 21 2 25 2 31 2 37 2 51 2 51 3 "C" "A" ±.002 "A"±0.05 FRONT MOUNTED "B" CONTACTS "n" ROWS 9 2 15 2 21 2 25 2 31 2 37 2 51 2 51 3 FRONT MOUNTED Contacts "n" 9 15 21 25 31 37 51 51 "C" English (IN) Rows 2 2 2 2 2 2 2 3 "A" ±.002 "A"±0.05 ENGLISH (IN) "A" "B" "C" "A" .565 .405 .275 .715 .555 .275 .865 .705 .275 .965 .805 .275 1.115 .955 .275 1.265 1.105 .275 1.615 1.455 .275 1.215 1.055 .315 "B" 10.29 14.10 17.91 20.45 24.26 28.07 36.96 26.80 "C" 6.99 6.99 6.99 6.99 6.99 6.99 6.99 8.00 METRIC (MM) "B" "C" 14.35 10.29 6.99 18.16 14.10 6.99 21.97 17.91 6.99 24.51 20.45 6.99 28.32 24.26 6.99 32.13 28.07 6.99 41.02 36.96 6.99 30.86 26.80 8.00 2X .092±.002 2.34±0.05 .092 ±.002 (2.34±0.05) REAR MOUNTED "A" ±.002 "A"±0.05 REAR MOUNTED "B" "D" CONTACTS "n" ROWS 9 2 15 2 21 2 25 2 31 2 37 2 51 2 51 3 "A" .56 .71 .86 .96 1.1 1.2 1.6 1.2 REAR MOUNTED "B" "D" CONTACTS "n" ROWS 9 2 15 2 21 2 25 2 31 2 37 2 51 2 51 3 R.099MAX 2.51 MAX .122±.002 3.10±0.05 Contacts ENGLISH (IN) "A" "B" .565 .715 .865 .965 1.115 1.265 1.615 1.215 "n" 9 15 21 25 31 37 51 51 "D" .405 .555 .705 .805 .955 1.105 1.455 1.055 "A" .255 .255 .255 .255 .255 .255 .255 .298 Rows 2 2 2 2 2 2 2 3 English METRIC(IN) (MM) "B" "D" 14.35 10.29 18.16 14.10 21.97 17.91 24.51 20.45 28.32 24.26 32.13 28.07 41.02 36.96 30.86 26.80 "A" .565 .715 .865 .965 1.115 1.265 1.615 1.215 R.099MAX 2.51 MAX 2X "B" 6.48"D" .405 6.48 .255 6.48 .555 6.48.255 6.48 .705 6.48 .255 .805 6.48 .255 7.57 .955 .255 1.105 .255 1.455 .255 1.055 .298 Metric (mm) .122±.002 3.10±0.05 "A" 14.35 18.16 21.97 24.51 28.32 32.13 41.02 30.86 "B" 10.29 14.10 17.91 20.45 24.26 28.07 36.96 26.80 "D" 6.48 6.48 6.48 6.48 6.48 6.48 6.48 7.57 135 2X R.063 MAX 1.60 MAX Metric (mm) "A" "B" "C" "A" .565 .405 .275 14.35 .715 .555 .275 18.16 R.063 MAX 1.60 MAX .865 .705 .275 21.97 2X .092±.002 2.34±0.05 .965 .805 .275 24.51 1.115 .955 .275 28.32 1.265 1.105 .275 32.13 1.615 1.455 .275 41.02 1.215 1.055 .315 30.86 "A .5 .7 .8 .9 1.1 1.2 1.6 1.2 7260 Commerce Circle E • Minneapolis, MN 55432-3103 Phone: 763.572.0656 Fax: 763.572.3925 Email: sales@omnetics.com www.omnetics.com Micro-D Hardware & Misc REAR MOUNTED Latching Panel Mount Cut Out (LATCHING MICRO-D SHOWN) "B" R.100 2.54 MAX REAR MOUNTED (LATCHING MICRO-D SHOWN) "B" .273 6.93 R.100 2.54 MAX .273 6.93 .092 ±.002(2.34±0.05) 2.34±0.05 .092±.002 "A" ±.002 ("A"±0.05) "A"±.002 "A"±0.05 Contacts "n" 9 15 21 25 31 37 51 Rows 2 2 2 2 2 2 2 5/64" HEX 5/64" HEX CONTACTS "n" ROWS 9 2 15 2 English (IN)2 21 25 2 CONTACTS "A" 31 2"B" "n" ROWS 1.120 .920 37 2 9 2 51 2 1.27015 1.070 2 1.42021 1.220 2 2 1.52025 1.320 2 1.67031 1.470 37 2 1.820 1.620 51 2 2.170 1.970 ENGLISH (IN) METRIC (MM) "A" "B" "A" "B" .920 28.45 23.37 1.120 1.070 32.26 27.18 1.270 "A"±.002 "A"±0.05 (mm) 36.07 1.220 30.99 1.420Metric 1.320 38.61 33.53 1.520 ENGLISH (IN)"B" METRIC (MM) "A" 1.470 42.42 37.34 1.670 "A" "B" "A" "B" 28.45 1.820 1.620 23.37 46.23 41.15 .920 28.45 23.37 1.120 1.970 27.18 55.12 50.04 2.170 32.26 1.070 32.26 27.18 1.270 36.07 30.99 36.07 1.220 30.99 1.420 1.320 33.53 1.520 38.61 33.53 38.61 1.470 37.34 1.670 42.42 37.34 42.42 1.820 1.620 46.23 41.15 46.23 41.15 1.970 55.12 50.04 2.170 .14 3.56 .14 3.56 55.12 .092 ±.002 2.34±0.05 50.04 OMNETICS PANEL THICKNESS REAR (MM) MOUNTED (Latching Micro-D Shown) ENGLISH (IN) METRIC PART # .010 - .045 0.25 - 1.14 D6292-156 .045 - .094 1.14 - 2.39 D6292-187 OMNETICS PANEL SCREWS SOLDTHICKNESS INDIVIDUALLY, ORDER TWO Panel Thickness PERENGLISH CONNECTOR. (IN) METRIC (MM) PART # .010 - .045 0.25 - 1.14 D6292-156 (mm) English .045 - .094(IN) 1.14 - Metric 2.39 D6292-187 .010 - .045 0.25 - 1.14 SCREWS ORDER TWO .045SOLD - .094INDIVIDUALLY, 1.14 - 2.39 PER CONNECTOR. Omnetics Part # D6292-156 D6292-187 136 SCREWS SOLD INDIVIDUALLY, ORDER TWO PER CONNECTOR. 7260 Commerce Circle E • Minneapolis, MN 55432-3103 Phone: 763.572.0656 Fax: 763.572.3925 Email: sales@omnetics.com www.omnetics.com Micro-D Hardware & Misc 'No Tools Required' Adapter 'No Tools Required' Adapter Latching Micro-D Conversion Kit Any Standard Micro-D connector with access to the back of the connector flange can be converted to a Latching Micro-D. With Omnetics' rugged latching systems, the need for tools is eliminated without compromising the performance expected from a Micro-D connector. Latching Micro-D Conversion Kit* Any standard Micro-D connector with access to the back of the connector flange can be converted to a Latching Micro-D. With Omnetics' rugged latching system, the need for tools is eliminated without compromising the performance expected from a Micro-D connector. "n" 9 15 21 25 31 37 51 Rows 2 2 2 2 2 2 2 Omnetics Part # A99018-009 A99018-015 A99018-021 A99018-025 A99018-031 A99018-037 A99018-051 7260 Commerce Circle E • Minneapolis, MN 55432-3103 Phone: 763.572.0656 Fax: 763.572.3925 Email: sales@omnetics.com www.omnetics.com *Patent Pending 137 Contacts *Patent Pending. Visit Omnetics' website for futher technical or contact information at Micro-D Hardware & Misc 45 Degree Round Entry, Micro-D Backshell "D" "D" "E" MAX "F"±.060 "E" MAX "F"±.060 #2-56 UNC-2A "B" "C" "A" MAX #2-56 UNC-2A "B" "C" "A" MAX NOTE: NOTE: BACKSHELL MATERIAL: ALUMINUM ALLOY ALLOY BACKSHELL MATERIAL: ALUMINUM NOTE: .0007/.0010 ELECTROLESS NICKEL NICKEL PER SAE PER SAE FINISH:FINISH: .0007/.0010 ELECTROLESS ALUMINUM ALLOY AMS-2404 CLASS 3BACKSHELL OR 4 GRADEMATERIAL: B AMS-2404 CLASS 3FINISH: OR 4.0007/.0010 GRADESTEEL, B E- NICKEL PER SAE HARDWARE: PASSIVATED STAINLESS ELECTROLESS CLASS 3 OR 4 GRADE B CLIPS NOTPASSIVATED SHOWNAMS-2404 STAINLESS HARDWARE: STEEL, HARDWARE: PASSIVATED STAINLESS STEEL, EENGLISH (IN) OMNETICS CONTACTS E-CLIPS (NOT SHOWN). CLIPS NOT SHOWN EACH KIT INCLUDES: BACKSHELL, TWO SCREWS AND TWO RETAINING CLIPS. ORDER ONE KIT PER CONNECTOR EACH KIT INCLUDES: BACKSHELL, TWO SCREWS AND TWO RETAINING CLIPS. ORDER EACH KIT INCLUDES: ONE KIT PER CONNECTOR BACKSHELL, TWO SCREWS AND TWO RETAINING CLIPS. ORDER METRIC (mm) ONE KIT PER CONNECTOR PART # NUMBER ROWS "A" "B" "C" "D" "E" "F" "A" "B" "C" "D" "E" "F" (IN)19.94 14.35 8.64 4.06METRIC OMNETICS CONTACTS A97000-009 9 2 .785 .565 .340 .160 ENGLISH .875 .650 22.23 (mm) 16.51 Contacts English (IN) Metric (mm) ROWS.340 "A" .190 "B" .925 "C" .700 "D" 23.75 "E" "F" "D" 17.78 "E" "F" A97000-015 15PART #2 NUMBER .935 .715 18.16 "A" 8.64 "B"4.83"C"23.50 A97000-009 9 2 .785 .565 .340 .160 .875 .650 19.94 14.35 8.64 4.06 22.23 16.51 Omnetics A97000-021 21 2 1.085 .865 .340 .220 .975 .735 27.56 21.97 8.64 5.59 24.77 18.67 A97000-015 15 2 .935 .715 .340 .190 .925 .700 23.75 18.16 8.64 4.83 23.50 17.78 25 2"A" 1.185"B" .965 .360 .260 1.025 30.10 24.51 6.60"C" 26.04 "D" 20.32 "E" PartA97000-025 # "n" Rows "D" "E".800.220 "F" "A".735 9.14 "B" "F" A97000-021 21 1.1152 "C" 1.085.275 .8651.065 .340 .97528.32 27.566.99 21.9727.05 8.6421.84 5.59 24.77 18.67 A97000-031 31 2 1.335 .360 .860 33.91 9.14 2 .785 .565 .160 .875 .650 19.94 14.35 8.64 4.06 A97000-009 A97000-025 25 1.185.285 .9651.105 .360 .925 .260 1.025 .800 9.14 30.107.24 24.51 9.14 6.6022.23 26.04 16.51 20.32 A97000-0379 37 2 1.485 1.2652.340 .360 37.72 32.13 28.07 23.50 A97000-031 31 2 1.335 1.115 .360 .275 1.065 .860 33.91 28.32 9.14 6.99 27.05 21.84 15 512 .935 .715 .190 1.187 .925.975.700 18.168.898.64 A97000-015 A97000-513 3 1.435 1.215 .340 .413 .350 36.45 23.75 30.86 10.49 30.154.83 24.77 23.50 17.78 A97000-037 37 2 1.485 1.265 .360 .285 1.105 .925 37.72 32.13 9.14 7.24 28.07 23.50 2 1.085 51.865 3.340 .7351.187 27.56 8.64 10.49 5.598.8924.77 A97000-021 21 A97000-513 1.435.220 1.215 .975 .413 .350 .975 21.97 36.45 30.86 30.1518.67 24.77 138 A97000-025 A97000-031 A97000-037 A97000-513 25 31 37 51 2 2 2 3 1.185 1.335 1.485 1.435 .965 1.115 1.265 1.215 .360 .360 .360 .413 .260 .275 .285 .350 1.025 1.065 1.105 1.187 .800 .860 .925 .975 30.10 33.91 37.72 36.45 24.51 28.32 32.13 41.02 9.14 9.14 9.14 10.49 6.60 6.99 7.24 8.89 26.04 27.05 28.07 30.15 20.32 21.84 23.50 24.77 7260 Commerce Circle E • Minneapolis, MN 55432-3103 Phone: 763.572.0656 Fax: 763.572.3925 Email: sales@omnetics.com www.omnetics.com Micro-D Hardware & Misc Straight Oval Entry, Micro-D Backshell "D"±.010"D"±.010 "D"±.010 "E"±.010 "E"±.010 "E"±.010 ACTUAL SIZE ACTUAL SIZE ACTUAL SIZE .26 .26 "F" .26 "F" "F" "C" "B" NOTE: "C" "A" MAX "B" "A" MAX NOTE: NOTE:BACKSHELL MATERIAL: ALUMINUM ALLOY "B" FINISH: MATERIAL: .0007/.0010 ELECTROLESS NICKEL PER BACKSHELL MATERIAL: ALUMINUM ALLOY BACKSHELL ALUMINUM ALLOY SAE AMS-2404 CLASS 3 OR 4 GRADE B "A" MAX FINISH: .0007/.0010 ELECTROLESS NICKEL PER SAE FINISH: .0007/.0010PASSIVATED ELECTROLESS NICKEL PER HARDWARE: STAINLESS STEEL, NOTE: SAE AMS-2404 CLASS 3 OR 4 GRADE B AMS-2404 CLASS 3 OR 4 GRADE B E-CLIPS NOT SHOWN BACKSHELL MATERIAL: ALUMINUM ALLOY HARDWARE: PASSIVATED STAINLESS STEEL, HARDWARE: PASSIVATED STAINLESS STEEL, E-CLIPS NOT SHOWN ENGLISH (IN) CONTACTS OMNETICS E-CLIPS (NOT SHOWN). NICKEL PER FINISH: .0007/.0010 ELECTROLESS "C" #2-56 UNC-2A #2-56 UNC-2A #2-56 UNC-2A EACH KIT INCLUDES: EACH KIT INCLUDES: BACKSHELL, TWO SCREWS AND BACKSHELL, TWO SCREWS AND TWO RETAINING CLIPS. ORDER EACH KIT INCLUDES: ONE KIT PER CONNECTOR TWO RETAINING CLIPS. ORDER BACKSHELL, TWO SCREWS AND TWO RETAININGONE CLIPS. ORDER KIT PER CONNECTOR ONE KIT PER METRIC (mm)CONNECTOR 2.935 .660 30.10 24.51 9.14 9.1413.34 19.696.936.93 16.76 A97001-025 15 2 .340.360 .525.775 .273.273 .715 .965 16.76 3725 2 1.185 .360 1.075 .273.660 .66023.75 A97001-015 1.485 1.265 37.72 18.16 32.13 8.64 27.31 6.93 16.76 A97001-037 31 2 1.335 1.115 .360 .925 .273 .660 33.91 28.32 9.14 23.50 6.93 16.76 A97001-031 512 3 21 .340 .380 .675 1.025 .273 .313.660.88027.56 1.435 36.45 21.97 30.86 8.64 9.60 17.15 26.04 7.95 1.085 .865 1.215 6.93 22.35 16.76 A97001-513 A97001-021 37 2 1.485 1.075.273.273.660 .66030.10 37.7224.51 32.139.149.1419.69 27.316.936.9316.76 16.76 25 2 .360.360.775 1.185 .9651.265 A97001-025 A97001-037 51 3 1.435 1.215 .380.925 1.025.273.313.660 .88033.91 36.4528.32 30.869.14 10.4923.50 26.046.937.9516.76 22.35 A97001-513 31 2 1.335 1.115 .360 A97001-031 37 2 .660 37.72 32.13 9.14 27.31 6.93 16.76 1.485 1.265 .360 1.075 .273 A97001-037 51 3 .880 36.45 30.86 9.60 26.04 7.95 22.35 1.435 1.215 .380 1.025 .313 A97001-5137260 Commerce Circle E • Minneapolis, MN 55432-3103 Phone: 763.572.0656 Fax: 763.572.3925 Email: sales@omnetics.com www.omnetics.com 139 NUMBER ROWS "A" "B" "C" "D" "E" "F" "A" "B" "C" "D" "F" PART #3 OR EACH KIT "E" INCLUDES: SAE AMS-2404 CLASS 4 GRADE B 9 2 .340 .375 .273 .660 .785 .565 19.94 14.35 8.64 9.53 6.93 ENGLISH (IN) METRIC (mm) A97001-009CONTACTS BACKSHELL, TWO SCREWS AND16.76 OMNETICS Contacts English (IN) Metric (mm) HARDWARE: PASSIVATED STAINLESS STEEL, TWO RETAINING CLIPS. ORDER 15 2 .340 .525 .273 .660 .935 .715 23.75 18.16 8.64 13.34 6.93 A97001-015 "B" "C" "D" "E" "F" "A" "B" "C" "D" "E" "F"16.76 PART # NUMBER ROWS "A" E-CLIPS NOTOmnetics SHOWN ONE KIT PER CONNECTOR 21 2 .340 .675 .273 .660 1.085 .865 27.56 21.97 8.64 17.15 6.93 16.7616.76 A97001-021 9 2 .340 .375 .273 .660 19.94 14.35 8.64 .785 .565 9.53 6.93 A97001-009 Part # "n"25Rows "B" "C" "F" 30.10 "A" 24.51"B"9.14 "C" "D" "E" "F" 2 "A" 1.185 .360 "D" .775 "E" .273 .660 .965 19.69 6.93 16.76 A97001-025 15 2 .340 .525 .273 .660 23.75 18.16 8.64 13.34 6.93 .935 .715 16.76 A97001-015 .565 19.9428.32 14.35 6.93 16.76 A97001-009 ENGLISH (IN) METRIC (mm) .360 .375 .925 .273 .273 .660 .660 33.91 CONTACTS 9 31 2 2.7851.335 1.115.340 9.14 8.64 23.50 9.53 6.93 16.76 OMNETICS A97001-031 21 2 .340 .675 .273 .660 27.56 21.97 8.64 17.15 6.93 16.76 1.085 .865 A97001-021 37 2 .360 1.075 .273 .660 1.485 37.72 9.14 27.31 6.93 "F"16.76 15 "A" 2 2 .935 .715 .525 .273 .660 23.7532.13 18.16 6.93 16.76 A97001-015 A97001-037 NUMBER ROWS "B" "C"1.265.340 "D" "B" "C" "D"8.64 "E"13.34 PART #A97001-025 25 .360 "E" .775 "F" .273 "A" .660 30.10 1.185 .965 24.51 9.14 19.69 6.93 16.76 51 2 3 .380 .675 1.025 .273 .313 .660 .880 36.45 1.435 1.215.340 30.86 9.60 8.64 26.04 17.15 7.95 22.35 A97001-513 21 1.085 .865 27.56 21.97 6.9316.76 16.76 A97001-021 9 .340 .360 .375 .925 .273 .273.660.66019.94 .785 .565 1.115 A97001-009 312 2 1.335 33.91 14.35 28.32 8.64 9.14 9.53 23.50 6.93 6.93 16.76 A97001-031 Micro-D Hardware & Misc 90 Degree Oval Entry, Micro-D Backshell .26 .26 .26 ACTUAL SIZE ACTUAL SIZE "D"±.010 ACTUAL SIZE "D"±.010 "D"±.010 "E"±.010 "E"±.010 "F" "F" "E"±.010 "F" #2-56 UNC-2A "B" "A" MAX NOTE: "C" "B" #2-56 UNC-2A "C" "A" MAX NOTE:BACKSHELL MATERIAL: ALUMINUM ALLOY NOTE: BACKSHELL MATERIAL: ALUMINUM ALLOY FINISH: .0007/.0010MATERIAL: ELECTROLESS NICKEL PER SAE BACKSHELL ALUMINUM ALLOY AMS-2404 CLASS 3 OR 4"B" GRADE B FINISH: .0007/.0010 ELECTROLESS NICKEL PER SAE FINISH: .0007/.0010 ELECTROLESS NICKEL PER SAE HARDWARE: PASSIVATED STAINLESS STEEL, E-CLIP AMS-2404 CLASS 3"A" ORMAX 4 GRADE B NOT SHOWN CLASS AMS-2404 3 OR 4 GRADE B HARDWARE: PASSIVATED STAINLESSENGLISH STEEL, (IN) OMNETICS CONTACTS HARDWARE: PASSIVATED STAINLESS STEEL, E-CLIP NOTE: E-CLIPS (NOT SHOWN). NOT PART # SHOWN NUMBER ROWS "A" "B" "C" "D" "E" "F" #2-56 UNC-2A EACH KIT INCLUDES: BACKSHELL, TWO SCREWS AND TWO RETAINING CLIPS. ORDER KIT INCLUDES: BACKSHELL, TWO SCREWS AND ONE KIT PER METRIC (mm) TWO RETAINING CLIPS.CONNECTOR ORDER EACH KIT INCLUDES: "C" BACKSHELL, TWO SCREWS AND TWO RETAINING CLIPS. ORDER ONE KIT PER CONNECTOR EACH KIT PER CONNECTOR "A" "B" "C" "D" "E"ONE"F" A97002-009 9 2 .785 .565 .340 .375 .273 .80 19.94 14.35 8.64 9.53 6.93 20.32 BACKSHELL MATERIAL: ALUMINUM ALLOY ENGLISH (IN) Contacts English (IN) Metric (mm)METRIC (mm) OMNETICS CONTACTS A97002-015 15 2 .935 .715 .340 .525 .273 .80 23.75 18.16 8.64 13.34 6.93 20.32 PART # ELECTROLESS NUMBER "A" PER "B"SAE "C" .273 "D" .80"E"27.56"F"21.97"A" "F" A97002-021 21 2 ROWS 1.085 .865 .340 .675 8.64 "B" 17.15 "C" 6.93 "D" 20.32 "E" Omnetics FINISH: .0007/.0010 NICKEL AMS-2404 CLASS 3 OR 4 GRADE B EACH KIT INCLUDES: A97002-009 9 2 .785 .565 .340 .375 .273 .80 19.94 14.35 8.64 9.53 6.93"F"20.32 A97002-025 25 Rows2 "A" 1.185 .965 30.10 24.51 9.14"B"19.69 "C" 6.93 20.32 Part # "n" "B" .360 "C" .775"D".273 "E".80 "F" "A" BACKSHELL, "D" "E" TWO SCREWS AND A97002-031 31 2 1.335 1.115 .360 .925 .273 .80 33.91 28.32 9.14 23.50 6.93 20.32 A97002-015 .935 E-CLIP .715 .340 .525 .273 .80 TWO 23.75 18.16 8.64 HARDWARE: PASSIVATED STEEL, RETAINING CLIPS. ORDER 9 215STAINLESS .7852 .565 .340 .375.273.273.80 .80 19.94 14.35 8.64 9.53 13.34 6.93 6.93 20.3220.32 A97002-009 A97002-037 1.075.340 27.31 6.93 8.64 A97002-02137 21 2 1.485 2 1.265 1.085.360.865 .675 37.72 .273 32.13 .80 9.14 27.56 21.97 17.15 6.93 20.32 NOT SHOWN ONE KIT PER20.32 CONNECTOR .340 1.025 .525.313.273 23.7510.16 18.16 6.93 20.32 A97002-015 A97002-513 15 51 2 3 .935 1.435 .715 1.215 .400 1.00 .80 36.45 30.86 26.048.64 7.95 13.34 25.40 A97002-025 25 2 1.185 .965 .360 .775 .273 .80 30.10 24.51 9.14 19.69 6.93 20.32 140 (IN).273 .80 27.56 21.97 METRIC (mm) 6.93 20.32 OMNETICS CONTACTS 21 2 1.085 .865 ENGLISH .340 .675 8.64 17.15 A97002-021 A97002-031 31 2 1.335 1.115 .360 .925 .273 .80 33.91 28.32 9.14 23.50 6.93 20.32 25 ROWS 237 1.185 .360 .80 24.51 "C" 9.14 "D" 19.69"E"6.93 "F"20.32 A97002-025 PART # A97002-037 NUMBER "A"2 .965 "B" "C" .775 "D" .273 "E" "F" 30.10 "A" "B" 1.485 1.265 .360 1.075 .273 .80 37.72 32.13 9.14 27.31 6.93 20.32 31 2 1.335 1.115 .360 .925 .273 .80 33.91 28.32 9.14 23.509.53 6.93 6.93 20.3220.32 A97002-031 A97002-009 9 2 .785 .565 1.215 .340 .400 .375 1.025 .273 .313.80 1.00 19.94 14.35 A97002-513 51 3 1.435 36.45 30.868.64 10.16 26.04 7.95 25.40 37.72 32.1318.16 9.14 8.64 27.3113.34 6.93 6.93 20.3220.32 A97002-03715 37 22 1.485 A97002-015 .935 1.265 .715 .360 .3401.075 .525.273.273.80 .80 23.75 1.00 .80 36.45 30.8621.97 10.168.64 26.0417.15 7.95 6.93 25.4020.32 A97002-51321 51 32 1.435 A97002-021 1.0851.215 .865 .400 .3401.025 .675.313.273 27.56 A97002-025 25 2 1.185 .965 .360 .775 .273 .80 30.10 24.51 9.14 19.69 6.93 20.32 A97002-031 31 2 1.335 1.115 .360 .925 .273 .80 33.91 28.32 9.14 23.50 6.93 20.32 7260 Commerce MN 55432-3103 A97002-037 37 2 1.485 1.265 .360 1.075 .273 .80 37.72 Circle 32.13E • Minneapolis, 9.14 27.31 6.93 20.32 Phone: 763.572.0656 Fax: 763.572.3925 A97002-513 51 3 1.435 1.215 .400 1.025 .313 1.00 36.45 30.86 10.16 26.04 7.95 25.40 Email: sales@omnetics.com www.omnetics.com Micro-D Hardware & Misc 45 Degree Elliptical Entry, Micro-D Backshell "E" MAX "E" MAX "E" MAX ACTUAL SIZE ACTUAL SIZE ACTUAL SIZE "D"±30.010 "D"±30.010 "D"±30.010 "F" MAX "F" MAX "F" MAX "B" "A" MAX #2-56 UNC-2A #2-56 UNC-2A "C" "B" "C" "A" MAX NOTE: BACKSHELL ALUMINUM ALLOY BACKSHELL MATERIAL: ALUMINUM ALLOY NOTE: MATERIAL: FINISH: .0007/.0010 ELECTROLESSELECTROLESS NICKEL PER SAE FINISH: .0007/.0010 NICKEL PER SAE BACKSHELL MATERIAL: ALUMINUM ALLOY AMS-2404 CLASS 3 OR 4 GRADE B "B" AMS-2404 CLASS 3 ORELECTROLESS 4 GRADE B STEEL, E-CLIP NICKEL PER SAE HARDWARE: FINISH: PASSIVATED STAINLESS .0007/.0010 NOT SHOWN AMS-2404 CLASS "A" MAX 3 OR GRADE B HARDWARE: PASSIVATED4 STAINLESS STEEL, ENGLISH (IN) OMNETICS CONTACTS E-CLIPS (NOT SHOWN). HARDWARE: PASSIVATED STAINLESS PART # NUMBER ROWS "A" "B" "C" "D" STEEL, "E" E-CLIP "F" "A" NOTE: #2-56 UNC-2A EACH KIT INCLUDES: EACH KIT INCLUDES:BACKSHELL, TWO SCREWS AND BACKSHELL, TWO SCREWS AND "C" TWO RETAINING CLIPS. ORDER TWO RETAINING CLIPS. ORDER ONE KIT PER CONNECTOR EACH KIT INCLUDES: ONETWO KIT PER CONNECTOR BACKSHELL, SCREWS AND METRIC (mm) TWO RETAINING CLIPS. ORDER "B" "C" "D" "E" "F" NOT SHOWN ONE KIT PER CONNECTOR A97003-009 9 2 .785 .565 .340 .344 .673 .851 19.94 14.35 8.64 8.74 17.09 21.62 NOTE: Contacts (IN) .673ENGLISH Metric (IN) 18.16 8.64 12.55 METRIC (mm) A97003-015 OMNETICS 15 2 CONTACTS .935 .715 English .340 .494 .876 23.75 17.09(mm) 22.25 BACKSHELL MATERIAL: ALUMINUM ALLOY A97003-021 21 2 1.085 .865 .340 .644 .673 .901 27.56 21.97 8.64 16.36 17.09 22.89 PART # NUMBER ROWS "A" "B" "C" "D" "E" "F" "A" "B" "C" "D" "E" "F" Omnetics A97003-025A97003-009 25 2 1.185 .965 2 .360.785 .744 .565 .700 .943 30.10 24.51 9.14 .851 18.90 19.94 17.78 23.95 9 .340 .344 .673 14.35 8.64 8.74 17.09 Part # 31 "n" Rows "A" .360SAE "B".894 "C" "D" "E" "F" "A" "B" "C" "D" "E" 21.62 "F" FINISH: .0007/.0010 NICKEL A97003-031 ELECTROLESS 2 1.335 1.115PER .700 .963 33.91 28.32 9.14 22.71 17.78 24.46 A97003-015 15 2 .935 .715 .340 .494 .673 .876 23.75 18.16 8.64 12.55 17.09 22.25 AMS-2404 A97003-037 CLASS 3 OR 4 GRADE B EACH KIT INCLUDES: 37 .994 .340 .700 .983 32.13.851 9.14 19.94 25.25 17.78 24.97 8.64 92 1.485 2 1.265 .785.360.565 .344 37.72 .673 14.35 8.74 17.09 21.62 A97003-009 BACKSHELL, AND 22.89 21 1.2152 .4001.085 .340 36.45 .64430.86 .673 21.97 TWO 8.64SCREWS 16.36 17.09 A97003-513 A97003-021 51 3 1.435 1.044 .865 .755 1.058 10.16.901 26.52 27.56 19.18 26.87 .673 .700 .876 .943 23.7530.10 18.16 8.64 12.55 17.09 22.25 TWO RETAINING 24.51 9.14CLIPS. 18.90ORDER 17.78 23.95 ONE KIT PER16.36 CONNECTOR .901 27.56 21.97 8.64 17.09 .700 .963 33.91 28.32 9.14 22.71 17.78 22.89 24.46 METRIC (mm) .943 .983 30.1037.72 24.51 .700 32.139.14 9.1418.19 25.25 17.78 17.78 23.95 24.97 "A" 1.058 "B" 36.45 "C" 30.86 "D" "E" .755 10.16 26.52"F" 19.18 24.46 26.87 .963 33.91 28.32 9.14 22.71 17.78 237 2.785 1.485 .5651.265 .340.360.344.994.673 .700 .851 .983 19.94 37.7214.35 32.13 8.64 9.14 8.74 25.25 17.09 17.78 21.62 24.97 2 .7151.215 .340.400.494 51 3.935 1.435 1.044.673 .755 .876 1.05823.75 36.4518.16 30.86 8.64 10.16 12.55 26.52 17.09 19.18 22.25 26.87 A97003-009A97003-037 9 A97003-015A97003-513 15 A97003-021 21 2 1.085 .865 .340 .644 A97003-025 25 2 1.185 .965 .360 .744 7260 Commerce Circle E • Minneapolis, MN 55432-3103 A97003-031 31 2 1.335 1.115 .360 .894 Phone: 763.572.0656 Fax: 763.572.3925 A97003-037 37 2 1.485 1.265 .360 .994 Email: sales@omnetics.com www.omnetics.com A97003-513 51 3 1.435 1.215 .400 1.044 .744 .673 .894 .700 .994 "F" 1.044 .700 .673 .700 .700 .700 .755 .901 .943 .963 .983 1.058 27.56 30.10 33.91 37.72 36.45 21.97 24.51 28.32 32.13 30.86 8.64 9.14 9.14 9.14 10.16 16.36 18.90 22.71 25.25 26.52 17.09 17.78 17.78 17.78 19.18 22.89 23.95 24.46 24.97 26.87 141 15 225 STEEL, .935 .715 .340 .494 HARDWARE:A97003-015 PASSIVATED STAINLESS A97003-025 2 E-CLIP 1.185 .965 .360 NOT SHOWNA97003-021 21 2 1.085 .865 .340 .644 A97003-031 31 2 1.335 1.115 .360 ENGLISH OMNETICS CONTACTS 25 237 1.185 .360(IN).744 A97003-025 A97003-037 2 .965 1.485 1.265 .360 PART # A97003-031 NUMBER ROWS "B" "C" 1.215 "D" .894 "E" A97003-513 51 1.335 3 1.115 1.435 .400 31 2"A" .360 Micro-D Hardware & Misc Straight Elliptical Entry, Split Micro-D Backshell "D"±.010 "D"±.010 "D"±.010 ACTUAL SIZE ACTUAL SIZE ACTUAL SIZE "E"±.020 "E"±.020 "F"±.010 "F"±.010 "E"±.020 .125 "F"±.010 .125 #2-56 UNC-2A "B" #2-56 UNC-2A "C" MIN "B" "A" MIN .125 "C" MIN "A" MIN NOTE: #2-56 NOTE: UNC-2A BACKSHELL MATERIAL: ALUMINUM ALLOY EACH KIT INCLUDES: BACKSHELL MATERIAL: ALUMINUM ALLOY NOTE: FINISH: .0007/.0010 ELECTROLESS NICKEL PER SAE "B" "C" MIN BACKSHELL, TWO SCREWS AND FINISH: .0007/.0010 ELECTROLESS NICKEL PER SAE EACH KIT INCLUDES: TWO BACKSHELL MATERIAL: AMS-2404 CLASS 3 OR 3 4 GRADE BACKSHELL HALVES, TWO ASSEMBLY AMS-2404 CLASS OR 4BGRADE B ALUMINUM ALLOY SCREWS, TWO RETAINING CLIPS. ORDER TWO JACKSCREWS AND TWO FINISH: EACH KIT INCLUDES: TWO HARDWARE: PASSIVATED STAINLESS STEEL,ELECTROLESS E-CLIPSTEEL,NICKEL PER SAE RETAINING CLIPS. ORDER ONE KIT "A" .0007/.0010 MIN HARDWARE: PASSIVATED AMS-2404STAINLESS CLASS 3 OR 4 GRADE B BACKSHELL HALVES, TWO ASSEMBLY NOT SHOWN PER CONNECTOR ONE KIT PER CONNECTOR SCREWS, TWO JACKSCREWS AND TWO E-CLIPS (NOT SHOWN). HARDWARE: PASSIVATED STAINLESS STEEL, E-CLIP RETAINING CLIPS. ORDER ONE KIT ENGLISH (IN) METRIC (mm) OMNETICS CONTACTS NOT SHOWN PER CONNECTOR PART # NUMBER ROWS "A" "B" "C" "D" "E" "F" "A" "B" "C" "D" "E" "F" English (mm) NOTE: ENGLISH METRIC (mm) OMNETICS A97004-021 21Contacts 2 1.185 CONTACTS .865 .370(IN) .368 .950 .630 30.10(IN) 21.97 9.40 Metric 9.35 24.13 16.00 PART # NUMBER ROWS "A" "B" "C" "D" "E" "F" "A" "B" "C" "D" "E" "F" A97004-025 25 2 1.285 .965 .370 .468 1.000 .680 32.64 24.51 9.40 11.89 25.40 17.27 OmneticsMATERIAL: ALUMINUM ALLOY BACKSHELL A97004-031 31 A97004-021 2 1.435 1.115 1.040 36.45.368 28.32.950 9.40 .630 15.70 30.10 26.42 21.97 18.29 9.40 9.35 24.13 16.00 21 .3702 .618 1.185 .865.720.370 Part # Rows "B" "C" "D" "E" "F"1.000 "A" "B"24.51 "C"9.40 "D" "E" 17.27 "F" A97004-037 37"n"A97004-025 2 1.585"A" 1.265 .3702 .718 1.080 40.26.468 32.13 9.40 .680 18.24 32.64 27.43 19.30 25NICKEL 1.285 .965.760.370 11.89 25.40 FINISH: .0007/.0010 ELECTROLESS PER SAE EACH KIT INCLUDES: TWO A97004-513 5121 3 1.535 1.215 .4102 .768 1.160 .840.370 38.99.618 30.86 10.41 19.51 36.45 29.46 21.34 1.185 .370 .368 .950 .630 30.10 21.97 9.40 9.35 24.13 16.00 A97004-021 A97004-031 1.435 1.115 1.040 .720 28.32 9.40TWO 15.70 26.42 18.29 AMS-2404 CLASS 3 OR 42 GRADE B31 .865 BACKSHELL HALVES, ASSEMBLY TWO JACKSCREWS AND 37 .9652 .370 1.585 1.265 1.080SCREWS, .760 40.26 32.13 9.4011.89 18.24 25.40 27.43 TWO 19.30 2 1.285 .468 .370 1.000.718.680 32.64 24.51 9.40 17.27 A97004-025 25 A97004-037 HARDWARE: PASSIVATED STAINLESS STEEL, E-CLIP RETAINING CLIPS. ONE KIT A97004-513 51 3 1.535 1.215 .410 .768 1.160 .840 38.99 30.86 10.41ORDER 19.51 29.46 21.34 31 2 1.435 1.115 .370 .618 1.040 .720 36.45 28.32 9.40 PER 15.70 26.42 18.29 A97004-031 NOT SHOWN CONNECTOR A97004-037 37 2 142 OMNETICS CONTACTS 51 3 A97004-513 PART # NUMBER ROWS A97004-021 21 2 A97004-025 25 2 A97004-031 31 2 A97004-037 37 2 A97004-513 51 3 1.585 1.265 .370 .718 1.080 .760 (IN)1.160 .840 1.535 1.215ENGLISH .410 .768 "A" 1.185 1.285 1.435 1.585 1.535 40.26 32.13 9.40 18.24 27.43 19.30 (mm) 29.46 21.34 38.99 30.86METRIC 10.41 19.51 "B" "C" "D" "E" "F" "A" "B" "C" "D" "E" "F" .865 .370 .368 .950 .630 30.10 21.97 9.40 9.35 24.13 16.00 .965 .370 .468 1.000 .680 32.64 24.51 9.40 11.89 25.40 17.27 7260 Commerce Circle E • Minneapolis, MN 55432-3103 1.115 .370 .618 1.040 .720 36.45 28.32 9.40 15.70 26.42 18.29 Phone: 763.572.0656 Fax: 763.572.3925 1.265 .370 .718 1.080 .760 40.26 32.13 9.40 18.24 27.43 19.30 Email: sales@omnetics.com 1.215 .410 .768 1.160 .840 38.99 30.86 10.41 www.omnetics.com 19.51 29.46 21.34 Micro-D Hardware & Misc 45 Degree Round Entry, Split Micro-D Backshell ACTUAL SIZE ACTUAL SIZE ACTUAL SIZE "D" "D" "E" MAX "F"±.060 "D" "E" MAX "F"±.060 "E" MAX "F"±.060 .093±.010 .093±.010 "B" "B" "A"±.010 "A"±.010 #2-56 UNC-2A "C"±.010 #2-56 UNC-2A "C"±.010 NOTE: A97005-009 9 "A"±.010 A97005-015 15 2 A97005-015 .946 .715 15.318 A97005-021 21 2 A97005-021 1.096 .865 21.318 NOTE: A97005-025 25 2 A97005-025 1.196 .965 25.318 A97005-031 31 2 A97005-031 1.346 1.115 31.318 ACKSHELL MATERIAL: ALUMINUM ALLOY A97005-037 37 2 A97005-037 1.496 1.265 37.318 A97005-513 51 3 1.446 PER 1.215 51 .361 A97005-513 INISH: .0007/.0010 ELECTROLESS NICKEL SAE Contacts 2 .190 2 .220 2 .260 2 .275 2 .285 2 .350 3 English (IN) .796 .565 .318 .160 1.000 .775 20.22 "C"±.010 14.35 8.08 4.06 25.40 19.69 1.050 .715 .825 .318 24.03 .190 18.161.050 8.08 .825 4.8324.03 26.6718.16 20.968.08 4.83 26.67 20.96 .946 1.100 .865 .860 .318 27.84 .220 21.971.100 8.08 .860 5.5927.84 27.9421.97 21.848.08 5.59 27.94 21.84 1.096 1.150 .965 .925 .318 30.38 .260 24.511.150 8.08 .925 6.6030.38 29.2124.51 23.508.08 6.60 29.21 23.50 1.196 1.1901.115 .985 .318 34.19 .275 28.321.190 8.08 .985 6.9934.19 30.2328.32 25.028.08 6.99 30.23 25.02 1.346 1.2301.265 1.050 .318 38.00 .285 32.131.230 8.081.050 7.2438.00 31.2432.13 26.678.08 7.24 31.24 26.67 1.496 1.3121.215 1.100 .361 36.73 .350 30.861.312 9.171.100 8.89 33.32 27.94 1.446 36.73 30.86 9.17 8.89 TWO 33.32 27.94 EACH KIT INCLUDES: Metric (mm) Omnetics Part # "n" Rows "A" "B" "C" "D" "E" "F" "A" "B" "C" "D" "E" "F" 9 B 2 .796 .565 .318 .160 1.000BACKSHELL .775 20.22 14.35 8.08 4.06 25.40 19.69 A97005-009 MS-2404 CLASS 3 OR 4 GRADE HALVES, TWO ASSEMBLY SCREWS, TWO JACKSCREWS AND TWO 26.67 20.96 2 .946 .715 .318 .190 1.050 .825 24.03 18.16 8.08 4.83 A97005-015 15 HARDWARE: PASSIVATED STAINLESS STEEL, E-CLIP RETAINING CLIPS. ORDER ONE KIT 2 1.096 .865 .318 .220 1.100 .860 27.84 21.97 5.59 27.94 21.84 NOT SHOWN A97005-021 21 PER 8.08 CONNECTOR 2 1.196 .965 .318 .260 1.150 .925 30.38 24.51 8.08 6.60 29.21 23.50 A97005-025 25 ENGLISH (IN) METRIC (mm) NETICS CONTACTS 2 1.346 1.115 .318 .275 1.190 .985 34.19 28.32 8.08 6.99 30.23 25.02 A97005-031 31 ART # NUMBERROWS "A" 2"B" 1.496 "C" 1.265 "D" .318 "E" .285 "F" 1.230 "A" 1.050 "B" 38.00 "C" 32.13 "D" 8.08 "E" 7.24 "F" 31.24 26.67 A97005-037 37 7005-009 9 2 51 .796 3 .565 .775 1.100 20.22 36.73 14.35 30.86 8.08 9.17 4.06 8.89 25.40 33.32 19.69 27.94 1.446.318 1.215.160 .361 1.000 .350 1.312 A97005-513 7005-015 7005-021 7005-025 7005-031 7005-037 7005-513 15 2 .946 .715 .318 .190 1.050 .825 24.03 21 2 1.096 .865 .318 .220 1.100 .860 27.84 7260 E • Minneapolis, 55432-3103 25Commerce 2 Circle 1.196 .965 MN .318 .260 1.150 .925 30.38 Phone: 763.572.0656 Fax: 763.572.3925 31 2 1.346 1.115 .318 .275 1.190 .985 34.19 Email: sales@omnetics.com 37 2 1.496 1.265 .318 .285 1.230 1.050 38.00 www.omnetics.com 51 3 1.446 1.215 .361 .350 1.312 1.100 36.73 18.16 21.97 24.51 28.32 32.13 30.86 8.08 8.08 8.08 8.08 8.08 9.17 4.83 5.59 6.60 6.99 7.24 8.89 26.67 27.94 29.21 30.23 31.24 33.32 20.96 21.84 23.50 25.02 26.67 27.94 143 .093±.010 NOTE: NOTE: BACKSHELL MATERIAL: ALUMINUM ALLOY BACKSHELL MATERIAL: ALUMINUM ALLOY BACKSHELL MATERIAL: ALUMINUM FINISH: .0007/.0010 ELECTROLESS NICKEL PER SAE ALLOY EACH KIT INCLUDES: TWO EACH KIT INCLUDES: TWO FINISH: .0007/.0010 ELECTROLESS NICKEL PER SAE AMS-2404 CLASS 3 OR 4 GRADE B BACKSHELL HALVES, TWO ASSEMBLY EACH KIT INCLUDES: TWO AMS-2404 CLASS 3 OR 4 GRADE BPER SAE FINISH: .0007/.0010 ELECTROLESS NICKEL SCREWS, TWO JACKSCREWSBACKSHELL AND TWO HALVES, TWO ASSEMBLY SCREWS, AND TWO BACKSHELL HALVES, TWO ASSEMBLY HARDWARE: PASSIVATED STAINLESS STEEL, E-CLIP RETAINING CLIPS. ORDER ONE KITTWO JACKSCREWS PASSIVATED STAINLESS STEEL, E-CLIP RETAINING CLIPS. ORDER ONE KIT NOT SHOWN PER CONNECTOR AMS-2404 CLASS 3 ORHARDWARE: 4 GRADE B NOT SHOWN PER CONNECTOR SCREWS, TWO JACKSCREWS AND TWO #2-56 ENGLISH STEEL, (IN) OMNETICS CONTACTS HARDWARE: PASSIVATED STAINLESS ENGLISH (IN)METRIC (mm) METRIC (mm) UNC-2A OMNETICS CONTACTS "B" RETAINING CLIPS. ORDER ONE KIT PART # NUMBERROWS PART "A" #"B"NUMBERROWS "C" "D" "E" "A" "F" "B" "A" "C" "B" "D" "C" "E" "D" "F" "E" "A" "F" "B" "C" "D" "E" "F" E-CLIPS (NOT 9SHOWN). A97005-009 2 .796 .565 .318 .160 1.000 .775 20.22 14.35 8.08 4.06 25.40 19.69 PER CONNECTOR Micro-D Hardware & Misc Didn’t Find What You Were Looking For? OMNETICS PROVIDES A WIDE RANGE OF CAPABILITIES TO DESIGN AND CREATE CONNECTORS THAT FIT YOUR INDIVIDUAL NEEDS. CUSTOM HOUSINGS MULTI-BODY SPECIAL MOUNTING SEALING CUSTOM JUMPERS MICRO-D TO ANY STYLE CONNECTOR MULTI-CONNECTOR HARNESSING CUSTOM BACKSHELLS CUSTOM OVERMOLDS 144 7260 Commerce Circle E • Minneapolis, MN 55432-3103 Phone: 763.572.0656 Fax: 763.572.3925 Email: sales@omnetics.com www.omnetics.com