CB0.81-2IPX-1.5IN

REVISIONS REV ECR 1 DESCRIPTION DRAWN ENIGINEERING RELEASE P. BURDGE DATE 07/22/2020 D -XX IN THE ENDING OF THE CABLE PART NUMBER IS CALLING OUT THE LENGTH OF THE ASSEMBLY FROM CENTER TO CENTER OF CONNECTORS. EXAMPLE(S) SHOWN BELOW: LTI P/N: CB0.81-2IPX-3IN (3 INCHES) CB0.81-2IPX-12.5IN (12.5 INCHES) XX.XX 2 ITEM PART NUMBER 1 2 LENGTH TOLERANCE FOR CABLE ASSEMBLIES Inches Millimeters 0 ‐ 2IN +/‐ 0.040 0 ‐ 51 +/‐ 1 2IN ‐ 6IN +/‐ 0.080 51 ‐ 153 +/‐ 2 6IN ‐ 12IN +/‐ 0.140 153 ‐ 305 +/‐ 3.5 12IN ‐ 48IN +/‐ 0.250 305 ‐ 1219 +/‐ 6.4 48IN ‐ 144IN (12FT) +/‐ 0.500 1219 ‐ 3658 +/‐ 13 144IN (12FT) ‐ ABOVE +/‐ 1.0 3658 ‐ ABOVE +/‐ 25 UNLESS OTHERWISE SPECIFIED ON DRAWING 1 C 2 DESCRIPITION QTY 0.81MM MICRO COAX CABLE, 0.81 MICRO COAX, WHITE AR IPXLF11GPB-081 IPX (MHF1), RHT ANGLE, JACK, CABLE CRIMP 2 B MHF IS A REGISTAERED TRADEMARK OF I-PEX CO., LTD. CORPORATION Lighthorse Technologies DO NOT SCALE DRAWING TOLERANCES UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS X = 0.5 X.X = 0.25 X.XX = 0.13 ANGLE = 30' San Diego, CA WWW.RFCONNECTOR.COM TITLE: CRIMP TO IPX (MHF1), R/A JACK, CRIMP USING 0.81 MICRO COAX, WHITE THIRD ANGLE PROJECTION CUSTOMER APPROVAL PROPRIETARY AND CONFIDENTIAL SIGN / DATE: UNLESS OTHERWISE SPECIFIED: THIS DOCUMENT CONTAINS LIGHTHORSE TECHNOLOGIES INFORMATION, REPRODUCTION, USE, DISCLOSURE OR TRANSMITTAL OF ALL OR ANY PART OF THIS DOCUMENT IS PROHIBITED EXCEPT TO THE EXTENT APPROVED IN WRITING BY AN AUTHORIZED REPRESENTATIVE OF LIGHTHORSE TECHNOLOGIES. LIGHTHORSE TECHNOLOGIES RESERVES ALL RIGHTS UNDER PATENTS, TRADEMARKS, COPY RIGHTS AND TRADE SECRETS. COPY RIGHTS OF LIGHTHORSE TECHNOLOGIES 2011, ALL RIGHTS RESERVED. ENG APPR. 6 5 P. BURDGE NAME 4 3 REV SIZE PART/DWG. NO: CHECKED DRAWN CABLE ASSEMBLY, IPX (MHF1), R/A JACK, 07/22/2020 DATE B CB0.81-2IPX-XXIN SCALE: 4:1 2 1 FILE NAME SHEET 1 OF 1 1 A