CB1.17LL-2IPX-11.5IN-6O

REVISIONS REV ECR 1 DESCRIPTION DRAWN ENGINEERING RELEASE P. BURDGE DATE 09/10/2020 D -XX IN THE ENDING OF THE CABLE PART NUMBER IS CALLING OUT THE LENGTH OF THE ASSEMBLY FROM CENTER TO CENTER OF CONNECTORS. EXAMPLES SHOWN BELOW: LTI P/N: CB1.17LL-2IPX-6IN (6 INCHES) CB1.17LL-2IPX-7.5IN (7.5 INCHES) C "-XX" LENGTH TOLERANCE FOR CABLE ASSEMBLIES Inches Millimeters 0 ‐ 2IN +/‐ 0.040 0 ‐ 51 +/‐ 1 2IN ‐ 6IN +/‐ 0.080 51 ‐ 153 +/‐ 2 6IN ‐ 12IN +/‐ 0.140 153 ‐ 305 +/‐ 3.5 12IN ‐ 48IN +/‐ 0.250 305 ‐ 1219 +/‐ 6.4 48IN ‐ 144IN (12FT) +/‐ 0.500 1219 ‐ 3658 +/‐ 13 144IN (12FT) ‐ ABOVE +/‐ 1.0 3658 ‐ ABOVE +/‐ 25 UNLESS OTHERWISE SPECIFIED ON DRAWING 2 1 2 B ITEM PART NUMBER DESCRIPITION QTY 1 1.17LL MICRO COAX CABLE, 1.17LL (LOW LOSS) MICRO COAX, GRAY AR 2 IPXLF11GPB-113 IPX(MHF1), RHT ANGLE, JACK, CABLE CRIMP 2 MHF IS A REGISTERED TRADEMARK OF I-PEX CO., LTD. CORPORATION Lighthorse Technologies DO NOT SCALE DRAWING TOLERANCES UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS X = 0.5 X.X = 0.25 X.XX = 0.13 ANGLE = 30' San Diego, CA WWW.RFCONNECTOR.COM TITLE: TO IPX (MHF1), R/A JACK, 1.17LL (LOW LOSS) MICRO COAX, GRAY, OPPOSITE ORIENTAION THIRD ANGLE PROJECTION CUSTOMER APPROVAL PROPRIETARY AND CONFIDENTIAL SIGN / DATE: UNLESS OTHERWISE SPECIFIED: THIS DOCUMENT CONTAINS LIGHTHORSE TECHNOLOGIES INFORMATION, REPRODUCTION, USE, DISCLOSURE OR TRANSMITTAL OF ALL OR ANY PART OF THIS DOCUMENT IS PROHIBITED EXCEPT TO THE EXTENT APPROVED IN WRITING BY AN AUTHORIZED REPRESENTATIVE OF LIGHTHORSE TECHNOLOGIES. LIGHTHORSE TECHNOLOGIES RESERVES ALL RIGHTS UNDER PATENTS, TRADEMARKS, COPY RIGHTS AND TRADE SECRETS. COPY RIGHTS OF LIGHTHORSE TECHNOLOGIES 2011, ALL RIGHTS RESERVED. ENG APPR. 6 5 P. BURDGE NAME 4 3 REV SIZE PART/DWG. NO: CHECKED DRAWN CABLE ASSY, IPX (MHF1), R/A JACK, 09/10/2020 DATE B CB1.17LL-2IPX-xxIN-6O SCALE: 4:1 2 1 FILE NAME SHEET 1 OF 1 1 A