CB1.37-IPX4LLK-SAFGT-10IN

REVISIONS REV ECR 1 DESCRIPTION DRAWN DATE P. BURDGE 11/10/2020 ENGINEERING RELEASE D -XX IN THE ENDING OF THE CABLE PART NUMBER IS CALLING OUT THE LENGTH OF THE ASSEMBLY FROM CENTER TO MATING FLANGE OF CONNECTORS. EXAMPLES SHOWN BELOW: LTI P/N: CB1.37-IPX4LLK-SAFGT-4IN (4 INCHES) CB1.37-IPX4LLK-SAFGT-6IN (6 INCHES) "-XX" C UP 3 1 2 ITEM PART NUMBER DESCRIPITION QTY 1 IPX4LLK-137 IPX4L (MHF4L), LOCKING, 1.37MM COAX 1 2 SASF11GT-316 SMA, JACK, CABLE CRIMP 1 3 1635F-1/8" .125 (1/8) DIA, .75 LENGTH, GREEN 1 B SCALE: NONE IPX® AND MHF® ARE REGISTAERED TRADEMARKS OF I-PEX CO., LTD. CORPORATION Lighthorse Technologies DO NOT SCALE DRAWING TOLERANCES UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS X = 0.5 X.X = 0.25 X.XX = 0.13 ANGLE = 30' San Diego, CA WWW.RFCONNECTOR.COM TITLE: SIGN / DATE: UNLESS OTHERWISE SPECIFIED: THIS DOCUMENT CONTAINS LIGHTHORSE TECHNOLOGIES INFORMATION, REPRODUCTION, USE, DISCLOSURE OR TRANSMITTAL OF ALL OR ANY PART OF THIS DOCUMENT IS PROHIBITED EXCEPT TO THE EXTENT APPROVED IN WRITING BY AN AUTHORIZED REPRESENTATIVE OF LIGHTHORSE TECHNOLOGIES. LIGHTHORSE TECHNOLOGIES RESERVES ALL RIGHTS UNDER PATENTS, TRADEMARKS, COPY RIGHTS AND TRADE SECRETS. COPY RIGHTS OF LIGHTHORSE TECHNOLOGIES 2011, ALL RIGHTS RESERVED. ENG APPR. 6 5 DRAWN P. BURDGE NAME 4 3 REV SIZE PART/DWG. NO: CHECKED 11-10-2020 DATE A (MHF4L) R/A JACK, CRIMP TO SMA, JACK, CABLE MNT, 1.37MM COAX THIRD ANGLE PROJECTION CUSTOMER APPROVAL PROPRIETARY AND CONFIDENTIAL CABLE ASSEMBLY, I-PEX LOCKING, B CB1.37-IPX4LLK-SAFGT-xxIN SCALE: 2:1 2 FILE NAME 1 SHEET 1 OF 1 1