CB1.37-IPX4LLK-SALF3GT-4IN

REVISIONS REV -XX IN THE ENDING OF THE CABLE PART NUMBER IS CALLING OUT THE LENGTH OF THE ASSEMBLY FROM CENTER TO MATING FLANGE OF CONNECTORS. EXAMPLES SHOWN BELOW: ECR 1 DESCRIPTION PRODUCTION RELEASE DRAWN DATE M. LARSEN 06/07/2022 LTI P/N: CB1.37-IPX4LLK-SALF3GT-4IN (4 INCHES) CB1.37-IPX4LLK-SALF3GT-10IN (10 INCHES) D XX.XXIN C 1 3 2 SCALE: NONE B ITEM PART NUMBER DESCRIPITION QTY 1 CB1.37-IPX4LLK-500MM IPX4LLK (MHF4L LK) LOCKING, RHT ANGLE, JACK, USING 1.37 CABLE, BLACK, (I-PEX 20632-001R-37) 0.5 2 SALF13RGT-316 SMA, RIGHT ANGLE, JACK, BLKHD MNT, CABLE CRIMP 1 3 1635F-1/8" .125 (1/8) DIA, .75 LENGTH, GREEN 1 IPX® AND MHF® ARE REGISTERED TRADEMARKS OF I-PEX CO., LTD. CORPORATION Lighthorse Technologies DO NOT SCALE DRAWING TOLERANCES UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS X = 0.5 X.X = 0.25 X.XX = 0.13 ANGLE = 30' San Diego, CA WWW.RFCONNECTOR.COM TITLE: LOCKING, R/A JACK, CRIMP TO SMA, R/A JACK, BLKHD MNT, CRIMP USING 1.37 MICRO COAX THIRD ANGLE PROJECTION CUSTOMER APPROVAL PROPRIETARY AND CONFIDENTIAL SIGN / DATE: UNLESS OTHERWISE SPECIFIED: THIS DOCUMENT CONTAINS LIGHTHORSE TECHNOLOGIES INFORMATION, REPRODUCTION, USE, DISCLOSURE OR TRANSMITTAL OF ALL OR ANY PART OF THIS DOCUMENT IS PROHIBITED EXCEPT TO THE EXTENT APPROVED IN WRITING BY AN AUTHORIZED REPRESENTATIVE OF LIGHTHORSE TECHNOLOGIES. LIGHTHORSE TECHNOLOGIES RESERVES ALL RIGHTS UNDER PATENTS, TRADEMARKS, COPY RIGHTS AND TRADE SECRETS. COPY RIGHTS OF LIGHTHORSE TECHNOLOGIES 2011, ALL RIGHTS RESERVED. ENG APPR. 6 5 CHECKED DRAWN P. BURDGE M. HELD M. LARSEN NAME 4 3 06/07/2022 06/07/2022 06/07/2022 DATE CABLE ASSEMBLY, IPX4LLK (MHF4L LK), REV SIZE PART/DWG. NO: B CB1.37-IPX4LLK-SALF3GT-xxIN SCALE: 4:1 2 FILE NAME A SHEET 1 OF 1 1 A