CB1.37-IPXLK-SALRF3GT-6IN

REVISIONS REV -XX IN THE ENDING OF THE CABLE PART NUMBER IS CALLING OUT THE LENGTH OF THE ASSEMBLY FROM CENTER TO MATING FLANGE OF CONNECTORS. EXAMPLES SHOWN BELOW: ECR 1 DESCRIPTION PRODUCTION RELEASE DRAWN DATE M. LARSEN 06/07/2022 LTI P/N: CB1.37-IPXLK-SALRF3GT-4IN (4 INCHES) CB1.37-IPXLK-SALRF3GT-10IN (10 INCHES) D XX.XXIN C 1 3 2 SCALE: NONE B ITEM 1 PART NUMBER DESCRIPITION IPXLK (MHF1 LK) LOCKING, RHT ANGLE, JACK, CB1.37-IPXLK-500MM USING 1.37 CABLE, BLACK, (I-PEX 20351-112R-37) QTY 0.5 2 SALRF13RGT-316 SMA, RIGHT ANGLE, REV POL JACK, BLKHD MNT, CABLE CRIMP 1 3 1635F-1/8" .125 (1/8) DIA, .75 LENGTH, GREEN 1 IPX® AND MHF® ARE REGISTERED TRADEMARKS OF I-PEX CO., LTD. CORPORATION DIMENSIONS ARE IN MILLIMETERS X = 0.5 X.X = 0.25 X.XX = 0.13 ANGLE = 30' SIGN / DATE: UNLESS OTHERWISE SPECIFIED: THIS DOCUMENT CONTAINS LIGHTHORSE TECHNOLOGIES INFORMATION, REPRODUCTION, USE, DISCLOSURE OR TRANSMITTAL OF ALL OR ANY PART OF THIS DOCUMENT IS PROHIBITED EXCEPT TO THE EXTENT APPROVED IN WRITING BY AN AUTHORIZED REPRESENTATIVE OF LIGHTHORSE TECHNOLOGIES. LIGHTHORSE TECHNOLOGIES RESERVES ALL RIGHTS UNDER PATENTS, TRADEMARKS, COPY RIGHTS AND TRADE SECRETS. COPY RIGHTS OF LIGHTHORSE TECHNOLOGIES 2011, ALL RIGHTS RESERVED. ENG APPR. 5 CHECKED DRAWN P. BURDGE M. HELD M. LARSEN NAME 4 3 San Diego, CA WWW.RFCONNECTOR.COM TITLE: THIRD ANGLE PROJECTION CUSTOMER APPROVAL PROPRIETARY AND CONFIDENTIAL 6 Lighthorse Technologies DO NOT SCALE DRAWING TOLERANCES UNLESS OTHERWISE SPECIFIED 06/07/2022 06/07/2022 06/07/2022 DATE CABLE ASSEMBLY, IPXLK (MHF1 LK), LOCKING, R/A JACK, CRIMP TO RP SMA, R/A JACK, BLKHD MNT, CRIMP USING 1.37 MICRO COAX REV SIZE PART/DWG. NO: B CB1.37-IPXLK-SALRF3GT-xxIN SCALE: 4:1 2 FILE NAME A SHEET 1 OF 1 1 A