UTGX1JC104P

- SHELLS : PA UL94 V0, UL746C F1 Black color - 3 LOCKING PINS RING : Nickel plated Brass + stainless Steels - INSERT : PA UL94 V0, UL746C F1 - BACKSHELLS : PA UL94 V0 F1 Black color - BACKSHELL Seal : CR - O'RING : Nitril - CONTACTS : brass + coated depending on P/N B 7 UTGX1JC----P WIRING AREA (between insert and backshell seal E1 ECHELLE CAPACITY C B-B COUPE ECHELLE Operating temperature: -40 C up to 105C resistance: 5000 min M under 500V Corrosion salt spray: 500 hours Durability: 500 matings and unmatings Sealing in mated conditions with counterpart: -IP68 1 bar during 1 week : immersion under 10 m of water. (IEC 60529) -IP69K : exposure to high pressure water of cleaning equipement(DIN 40050) HEXAGON D Insulation (See tightening torque in table) BACKSHELL NUT BACKSHELL BODY UTGX1JC----S 5 F Maxi Total prolongator lenght 6 WIRING AREA (between insert and backshell seal E2 O'RING B-B 4 A 3 LOCKING PINS RING COUPE 6 1- Contact to be ordered separately : refer to corresponding catalogue. 2- Insert arrangement refer to: UTO-CONTACT-L-C02 (Female insulator) UTO-DHP-003-C01 (Female insulator #20) 5 UTO-DHP-002-C01 (Female insulator #16) UTO-CONTACT-L-C01 (Male insulator) UTO-DHP-003-C01 (Male insulator #20) UTO-DHP-001-C01 (Male insulator #16) 3- This part shall be used at the place of the standard seal to accomodate with different cable 4- Plug, backshell and the reducing seal are delivered a kit. The backshell already includes the standard SHELL PROLONGATOR 3/2 7 NOTA: SHELL COUPLING RING COUPE ECHELLE 8 PERFORMANCE CHARACTERISTICS : 3/2 BACKSHELL SEAL 3/2 A B C D E F G H MATERIAL : COMMON QUOTES FOR ALL TYPE OF CONTACTS 8 B.3; Validé SIDE VIEW FOR EACH TYPE OF CONTACTS A-A 4 CountryJurisdiction& Control List FR NOT LISTED P/N : CROSS REF TABLE UTGX 1 JC 14 19 P - BASIC SERIES 3 SHELL SIZE 0.2 MAX STANDARD REDUCING SEAL (NOTA.3) HEXAGON backshell nut MAX MAX 10% (g.) D Tightening torque (N.m) E1 E2 F MASS 1.5 / 5 18.5 1 31 38 75 22 5 / 12 3 / 9 24 2 34 41.5 78 33 7 / 14 5 / 12 26 2.5 38 45.5 84 46 A B C 10 15.2 26.7 2.5 / 8 12 19.15 30.1 14 22.31 35.1 Free hanging prolongator SHELL TYPE 1 BACKSHELL JC SHELL SIZE 10 12 14 ORIENTATIONS Normal (no digit) W,X,Y,Z INSERT ARRANGEMENT See NOTA 2 TYPE OF CONTACTS P: MALE S: FEMALE 2 B 14/02/2020 ISS DATE Designed by: TITLE Scale 2/1 * P/N for example -Update drawing -- 25253J Latest modification - by: J.FEURPRIER PE.LANDAIS Date:10/05/19 1 H G F E D C FORMAT A2 CUSTOMER DRAWING MOD N 2 FREE HANGING PROLONGATOR Type 1, SIZE 10 12 14 - standard version UTGX CONNECTOR Dimensions in mm General linear Tolerances: 0.2 www.souriau.com SOURIAU shall not be liable for any non-conformity or damage due to a use of the Products which does not comply with the Specifications issued by either of the Parties or by a third party (professional recommendation, technical notice.) 3 SOURIAU DRG N° UTGX-0003A-C B NPRDS / PROJECT GBB This document is the property of SOURIAU It must not be reproduced or communicated without permission SHEET 1 / 1 A 1