CONSMP001-1

CONSMP001-1 SMP RF Interface, Plug, 50 Ω, Snap-On, 26.5 GHz Operating Frequency, Cable-toBoard, 1 Position, Printed Circuit Board, Board Mount, Stainless Steel CONSMP001-1  ACTIVE TE Internal #: CONSMP001-1 SMP RF Interface, Plug, 50 Ω, Snap-On, 26.5 GHz Operating Frequency, Cable-to-Board, 1 Position, Printed Circuit Board, Board Mount, Stainless Steel View on TE.com > Connectors > RF Connectors > Coax Connectors RF Interface: SMP RF Connector Style: Plug Impedance: 50 Ω RF Connector Coupling Mechanism: Snap-On Operating Frequency: 26.5 GHz Features Product Type Features Connector Product Type Connector Assembly RF Interface SMP RF Connector Style Plug Connector System Cable-to-Board Sealable No Connector & Contact Terminates To Printed Circuit Board Configuration Features Number of Positions 1 Number of Coaxial Contacts 1 Electrical Characteristics Impedance 50 Ω Body Features Body Material Stainless Steel Body Plating Material Gold Mechanical Attachment  RF Connector Coupling Mechanism Snap-On Connector Mounting Type Board Mount Operation/Application For support call+1 800 522 6752 01/03/2024 12:00AM | Page 1 CONSMP001-1 SMP RF Interface, Plug, 50 Ω, Snap-On, 26.5 GHz Operating Frequency, Cable-toBoard, 1 Position, Printed Circuit Board, Board Mount, Stainless Steel Operation/Application Operating Frequency 26.5 GHz Circuit Application Signal Other Dielectric Material Polytetrafluoroethylene (PTFE) Product Compliance For compliance documentation, visit the product page on TE.com> EU RoHS Directive 2011/65/EU Compliant with Exemptions EU ELV Directive 2000/53/EC Not Yet Reviewed China RoHS 2 Directive MIIT Order No 32, 2016 Restricted Materials Above Threshold EU REACH Regulation (EC) No. 1907/2006 Current ECHA Candidate List: JUNE 2023 (235) Not Yet Reviewed Halogen Content Not Yet Reviewed for halogen content Solder Process Capability Not reviewed for solder process capability Product Compliance Disclaimer This information is provided based on reasonable inquiry of our suppliers and represents our current actual knowledge based on the information they provided. This information is subject to change. The part numbers that TE has identified as EU RoHS compliant have a maximum concentration of 0.1% by weight in homogenous materials for lead, hexavalent chromium, mercury, PBB, PBDE, DBP, BBP, DEHP, DIBP, and 0.01% for cadmium, or qualify for an exemption to these limits as defined in the Annexes of Directive 2011/65/EU (RoHS2). Finished electrical and electronic equipment products will be CE marked as required by Directive 2011/65/EU. Components may not be CE marked.Additionally, the part numbers that TE has identified as EU ELV compliant have a maximum concentration of 0.1% by weight in homogenous materials for lead, hexavalent chromium, and mercury, and 0.01% for cadmium, or qualify for an exemption to these limits as defined in the Annexes of Directive 2000/53/EC (ELV). Regarding the REACH Regulations, TE’s information on SVHC in articles for this part number is still based on the European Chemical Agency (ECHA) ‘Guidance on requirements for substances in articles’(Version: 2, April 2011), applying the 0.1% weight on weight concentration threshold at the finished product level. TE is aware of the European Court of Justice ruling of September 10th, 2015 also known as O5A (Once An Article Always An Article) stating that, in case of ‘complex object’, the threshold for a SVHC must be applied to both the product as a whole and simultaneously to each of the articles forming part of its composition. TE has evaluated this ruling based on the new ECHA “Guidance on requirements for substances in articles” (June 2017, version 4.0) and will be updating its statements accordingly. Compatible Parts  For support call+1 800 522 6752 01/03/2024 12:00AM | Page 2 CONSMP001-1 SMP RF Interface, Plug, 50 Ω, Snap-On, 26.5 GHz Operating Frequency, Cable-toBoard, 1 Position, Printed Circuit Board, Board Mount, Stainless Steel TE Part # ADP-SMAF-SMPF-G TE Part # ADP-SMPF-SMPF-G SMA Jack to SMP Jack SMP Jack to SMP Jack Customers Also Bought TE Part #2-6609129-8 TE Part #8-1609095-9 TE Part #323985 TE Part #5-747905-7 5EFM4S=F8112 2FB3=F8361 PIDG Ring Tongue Terminals 9 Rcpt Solder Cup, G/F w/ CN, TE Part #2-520184-2 TE Part #1-111626-7 TE Part #2-111626-7 TE Part #NB15492001 ULTRAFAST 250 ASSY REC 22-18 TPBR LP 10, 2MM, 30 DP, LEAD FREE 026 2MM 30DP FT RNF-100-3/64-BK-STK TE Part #ADP-NF-NF-B-W N Type Jack to N Type Jack Bulkhead Documents Product Drawings SMP Plug 50 Ohm PCB Through Hole English Datasheets & Catalog Pages The FCC Road Part 15 From Concept to Approval English RF Coaxial Connector Gender Naming English  RF 101 Information for the RF Challenged For support call+1 800 522 6752 01/03/2024 12:00AM | Page 3 CONSMP001-1 SMP RF Interface, Plug, 50 Ω, Snap-On, 26.5 GHz Operating Frequency, Cable-toBoard, 1 Position, Printed Circuit Board, Board Mount, Stainless Steel RF 101 Information for the RF Challenged English SMP Plug PCB Through-Hole Connector English  For support call+1 800 522 6752 01/03/2024 12:00AM | Page 4