CONSWD001-SMD

CONSWD001-SMD SWD Jack 50 Ohm PCB Surface Mount CONSWD001-SMD  ACTIVE TE Internal #: CONSWD001-SMD TE Internal Description: SWD Jack 50 Ohm PCB Surface Mount View on TE.com > Product Compliance For compliance documentation, visit the product page on TE.com> EU RoHS Directive 2011/65/EU Not Yet Reviewed EU ELV Directive 2000/53/EC Not Yet Reviewed China RoHS 2 Directive MIIT Order No 32, 2016 Not reviewed for China RoHS compliance EU REACH Regulation (EC) No. 1907/2006 Current ECHA Candidate List: JUNE 2023 (235) Not Yet Reviewed Halogen Content Not Yet Reviewed for halogen content Solder Process Capability Not reviewed for solder process capability Product Compliance Disclaimer This information is provided based on reasonable inquiry of our suppliers and represents our current actual knowledge based on the information they provided. This information is subject to change. The part numbers that TE has identified as EU RoHS compliant have a maximum concentration of 0.1% by weight in homogenous materials for lead, hexavalent chromium, mercury, PBB, PBDE, DBP, BBP, DEHP, DIBP, and 0.01% for cadmium, or qualify for an exemption to these limits as defined in the Annexes of Directive 2011/65/EU (RoHS2). Finished electrical and electronic equipment products will be CE marked as required by Directive 2011/65/EU. Components may not be CE marked.Additionally, the part numbers that TE has identified as EU ELV compliant have a maximum concentration of 0.1% by weight in homogenous materials for lead, hexavalent chromium, and mercury, and 0.01% for cadmium, or qualify for an exemption to these limits as defined in the Annexes of Directive 2000/53/EC (ELV). Regarding the REACH Regulations, TE’s information on SVHC in articles for this part number is still based on the European Chemical Agency (ECHA) ‘Guidance on requirements for substances in articles’(Version: 2, April 2011), applying the 0.1% weight on weight concentration threshold at the finished product level. TE is aware of the European Court of Justice ruling of September 10th, 2015 also known as O5A (Once An Article Always An Article) stating that, in case of ‘complex object’, the threshold for a SVHC must be applied to both the product as a whole and simultaneously to each of the articles forming part of its composition. TE has evaluated this ruling based on the new ECHA “Guidance on requirements for substances in articles” (June 2017, version 4.0) and will be updating its statements accordingly. Compatible Parts  For support call+1 800 522 6752 01/03/2024 12:01AM | Page 1 CONSWD001-SMD SWD Jack 50 Ohm PCB Surface Mount TE Part # 2081956-1 TE Part # CONSMP001-SMD-G-T TE Part # CONSWF001-SMD RF SWITCH SMP Plug 50 Ohm PCB Surface Mount SWF Jack 50 Ohm PCB Surface Mount Documents Product Drawings SWD Jack 50 Ohm PCB Surface Mount English Datasheets & Catalog Pages The FCC Road Part 15 From Concept to Approval English RF Coaxial Connector Gender Naming English RF 101 Information for the RF Challenged English Surface-Mount SWF RF Switch Connector English  For support call+1 800 522 6752 01/03/2024 12:01AM | Page 2